M5 REAR LOADER
PERFORMANCE SPECIFICATIONS (in seconds)*WORKING RPM @ IDLE
Compaction Cycle 16
Sweep Extend 3
Sweep Retract 4
Slide Extend 5
Slide Retract 4
Ejector Extend (in seconds) 13
Ejector Retract (in seconds) 7
Tailgate Open 9
Tailgate Close 6Compaction = 600–800 lb/yd
*Cycle times may vary slightly
STANDARD BODY SPECIFICATIONSBody Floor 10-gauge grade 50
high-strength steel
Side Walls 10-gauge grade 50 high-strength steel
Roof 10-gauge grade 50 high-strength steel
HOPPER SPECIFICATIONSHopper Capacity 2.5 cu yd
Hopper Floor 1/4 in. AR200
PACKER/EJECTOR SPECIFICATIONSSlide Face Plate 8-gauge A607 grade
50 high-
strength steel
Sweep Face Plate 1/4 in. AR400
Side & Top Packing Panel 1/4 in. grade 50 high-strength
steel
Quick Change UHMW Polyethylene Slide Shoes
POPULAR OPTIONSSpool Winch
Guides & Latches
Container Lift Bar
3/16 in. Hopper Liner
Single or Dual Cart Tippers
TAILGATE SPECIFICATIONSLower Side Wall 3/16 in. AR200
Upper Side Wall 10-gauge grade 50 high-strength steel
Loading Edge 3/16 in. grade 50 high-strength steel
Tailgate Seal Height 50 in
HYDRAULICSPump Single gear or vane with pack-on-the-go
flow control systemControl Valves Primary; Parker VA35 with
Smart-Pak®Oil Reservoir (inside body) 35 gallonFilter Parker 40 CN,
100 mesh suction strainer
CYLINDERSEjector Cylinder 5-1/4 in. bore x 3-3/4 in. rod x
63-1/4
in. stroke, telescopic
Slide Cylinder 3-3/4 in. bore x 2-1/4 in. rod x 33-1/2 in.
stroke
Sweep Cylinders 3-3/4 in. bore x 2-1/4 in. rod x 21-3/8 in.
stroke
Tailgate Cylinder 3 in. bore x 2 in. rod x 20-7/8 in. stroke
PAINTINGPacker and components steel shot blasted prior to
priming with high solids epoxy primer
Finish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance,
high solids polyurethane
OPERATIONSMechanical controls with integrated control panel
Built for reliability and to maneuver through tightly packed
communities.
One of the most productive and reliable rear loaders in the
industry for residential and light commercial routes
Compact, sturdy and designed to maneuver through tight spots and
twisting turns
Quick pack cycle time maximizes efficiency by keeping the hopper
clear at all times, saving time on densely populated routes
Easy to maintain providing high productivity and increased
efficiency
Able to meet collection needs worldwide through ability to
accommodate international requirements
2015 Model Year Updates
LED Trap Lights
LED Hopper Work Light
Learn more at www.mcneiluscompanies.com© 2015 McNeilus Truck
& Manufacturing, Inc. McNeilus and the McNeilus logo are
trademarks of McNeilus Truck & Manufacturing, Inc., Dodge
Center, MN, USA. All other designated trademarks are the property
of their respective owners. Specifications, descriptions and
illustrations in this brochure are accurate as shown at the time of
publication, but are subject to change without notice.
Illustrations may include optional equipment and accessories and
may not include all standard equipment.
We offer a complete line of parts and services for all makes and
models. View and purchase at www.StreetSmartParts.com or call
888.686.7278.
A
C
B
D
E
F
REAR VIEW
SIDE VIEW
Industry’s best factory-direct service and support network with
mobile service trucks ready to answer your call
Top-quality, abrasion-resistant steel featured in the hopper—the
highest wear area—increasing durability
NGEN CNG (Compressed Natural Gas) systems available on a range
of chassis choices and engine configurations
DIMENSIONSDESCRIPTION 11 YD3 (8.4 M3)
(A) Body Length, Tailgate Closed 208 in 5283 mm
(B) Body Length, Tailgate Raised 240 in 6096 mm
(C) Body Height, Tailgate Closed** 80 in 2032 mm
(D) Body Height, Tailgate Raised** 123 in 3124 mm
(E) Inside Hopper Width 75 in 1905 mm
(F) Hopper Opening Height 68 in 1727 mm
**Dimension with no winch. Adding a spool winch will increase
height dimension.
M5 REAR LOADER
