M318D Material · PDF fileEngine Model Cat® C6.6 ACERT ... M318D Material Handler ... controlled, hydraulic motor drives a variable speed on-demand fan for engine

®®

EngineEngine Model Cat® C6.6 ACERT™Net Power 124 kW 166 hp

• Maximum power at 1,800 rpm

WeightsOperating Weight 21 100 kg (46,518 lb)

to 23 425 kg (51,643 lb)

TransmissionMaximum Travel Speed 25 km/h 16 mph

M318DMaterialHandler

2

M318D Material HandlerThe D series Material Handlers incorporates innovations for improved performanceand versatility.

Increased lifting capacity, improvedcycle times and ease of operation leadto increased productivity and costeffective solutions.

Environmentally Responsible Design

Helping to protect our environment, theengine has low operator and spectatorsound levels, longer filter change intervalsand is more fuel-efficient. pg. 12

Versatility

Caterpillar offers a wide variety of worktools and factory-installed attachmentsthat enhance performance and job sitemanagement. pg. 11

Operator Comfort

The totally redesigned operator stationmaximizes comfort while increasingsafety. The available auto-weightadjusted, air-suspension seat withheated and cooled ventilated cushionsimproves operator comfort. pg. 6

Hydraulics

The state of the art hydraulic systemprovides you with faster cycle times andincreased productivity on any materialhandling job. pg. 5

Engine

Caterpillar’s exclusive ACERT™Technology surpasses the most stringentemissions requirements in the industry.The U.S. EPA Tier 3 compliant C6.6offers increased performance andreliability while reducing fuelconsumption and sound levels. pg. 4

✔ New Feature

3

Complete Customer Support

Your Cat® dealer offers a wide rangeof services that can be set up under acustomer agreement when you purchaseyour equipment. Your dealer will helpyou choose a plan that can covereverything from machine and attachmentselection to replacement. pg. 13

Serviceability

For increased safety, all daily maintenancepoints are accessible from ground level.A centralized greasing system allowslubrication of critical points. pg. 14

Booms and Sticks

Caterpillar® booms and sticks are builtfor performance and long service life.The box section design provides thestrength needed for even the toughestapplications. Multiple boom and stickoptions allow you to pick the best matchfor your job. pg. 10

Undercarriage

Various undercarriage configurationsare available to provide the best solutionfor your work environment; theseconfigurations can include a dozer bladeand/or outriggers depending on yourneeds. pg. 9

Elevated Cab

The new D-Series Material Handlerelevated cab has been redesigned,focusing on operator safety and comfortwhile maintaining the fastest solutionfor maximum visibility. pg. 8

Powerful Performance. The Cat® C6.6with ACERT™ Technology introducesa series of evolutionary, incrementalimprovements that provide breakthroughengine performance. The building blocksof ACERT Technology are fuel delivery,air management and electronic control.ACERT Technology optimizes engineperformance while meeting U.S. EPATier 3 engine emission regulations.The Cat C6.6 engine in the M318D MHdelivers a maximum gross power of130 kW (174 hp) at a rated speed of1,800 rpm. This is 9% more horsepoweras compared to the 3056E in theM318C MH.

Low Fuel Consumption. The C6.6 iselectronically controlled and uses thenew Cat Common Rail Fuel System andfuel pump. This combination providesoutstanding fuel consumption duringboth production and travel. When thesystem recognizes roading applicationthe engine adjusts to the most efficientsystem operating point to save fuelwithout compromising road performance.

Low Noise, Low Vibration. The Cat C6.6design improves operator comfort byreducing sound and vibration.

Cooling System. An electronicallycontrolled, hydraulic motor drives avariable speed on-demand fan for enginecoolant and hydraulic oil. The optimumfan speed is determined based on coolantand hydraulic oil temperature resultingin reduced fuel consumption and lowersound levels. The electronic enginecontrol continuously compensatesfor the varying fan load, providingconsistent net power, regardlessof operating conditions.

One-Touch Low Idle Control. The two-stage, one-touch Automatic Engine SpeedControl reduces engine speed if nooperation is performed, maximizing fuelefficiency and reducing sound levels.

Waste Handling Package. The WasteHandling Package has been specificallydeveloped for Cat Wheel Excavatorsworking in waste transfer stations orother extremely dusty applications.This option features the following:

• An automatic, hydraulic reversiblefan that reverses airflow after a setinterval, manually adjustable between2 and 60 minutes with a switchlocated inside the cab.

• A special dense wire mesh coolingsystem hood further reduces radiatorclogging.

• Two cyclone filters provide cleanfiltered air to the engine compartment,air cleaner, aftercooler and airconditioner condenser.

4

EngineBuilt for power, reliability, low maintenance, excellent fuel economy and low emissions.

Improved Implement Speed. Due to newspools and increased horsepower, theM318D MH is able to offer even fasterstick and swing speeds, leading to moreproductivity.

Dedicated Swing Pump. A dedicated,variable displacement piston pump andfixed displacement piston motor powerthe swing mechanism. This closedhydraulic circuit maximizes swingperformance without reducing power tothe other hydraulic functions, resultingin smoother combined movements.

Heavy Lift Mode. This mode maximizeslifting performance by boosting thelifting capability of the material handlerby 7 percent. Heavy loads can be easilymoved in the full working range of themachine, maintaining excellent stabilityand speed.

Adjustable Hydraulic Sensitivity.Adjustable Hydraulic Sensitivity allowsthe operator to adjust the aggressivenessof the machine according to theapplication. For precision work, one ofthree different levels of aggressivenesscan be pre-selected.

Proportional Auxiliary Hydraulics.Versatility of the hydraulic system canbe expanded to utilize a wide varietyof hydraulic work tools using multiplevalve options.

• The Multi-Combined Valve is thecore of the Tool Control System,allowing the operator to select up toten pre-programmed work tools fromthe monitor. These preset hydraulicparameters support either one-wayor two-way flow. The joysticksliding switches allow modulatedcontrol of the work tool.

• The Medium Pressure FunctionValve provides proportional flowthat is ideal for rotating tools.

• A new feature for the D-SeriesMaterial Handlers is the optionalsecond High Pressure Valve.In combination with the Multi-Combined Valve, it provides thepossibility to operate the machinewith work tools or in applicationsrequiring a third auxiliary hydraulicfunction.

Stick Regeneration Circuit. The StickRegeneration Circuit increases efficiencyand helps increase controllabilityfor higher productivity and loweroperating costs.

Hydraulic Snubbers. Caterpillarintegrates its cylinder snubber technologyinto all Wheel Material Handler boom,stick and hydraulic cab riser cylinders.These snubbers help cushion shocks,reduce sound and increase cylinder life.

Caterpillar® XT™-6 ES Hoses.Premium quality rubber, precision4-ply wire reinforcement and exclusivereusable couplings are all uniquefeatures that deliver top performanceand long life.

5

HydraulicsFast cycle times and increased lift capacity combine to maximize your productivity in any job.

6

Operator ComfortThe interior layout maximizes operator space, provides exceptional comfort and reducesoperator fatigue.

Interior Operator Station. Improvedvisibility and ergonomics are some ofthe many new features of the D-SeriesMaterial Handler Operator Station.The pressurized cab provides maximumspace and is designed for simplicity andfunctionality. Frequently used switchesare centralized and are situated on theright-hand switch console. The left-handseat console controls the dozer bladeand/or outriggers, and is tiltable for easyaccess to the cab. The fully automaticclimate control adjusts temperature andair flow for exceptional operator comfort.Other features include a cigar lighter,ashtray, drink/bottle holder, magazinerack and integrated mobile phone holder.

Cab Construction. The exterior designuses thick steel tubing along the bottomperimeter of the cab, improving theresistance to fatigue and vibration.This design allows the falling objectguards to be bolted directly to the cab.Interior noise levels are substantiallyreduced due to the cab shell beingattached to the frame with rubber mountsthat limit vibration and sound transmittedfrom the frame.

Viewing Area. To maximize visibility,all glass is affixed directly to the cab,eliminating the use of window frames.Choice of fixed or easy-to-open splitfront windshields meet operatorpreference and application conditions.

• The fixed front windshield comeswith high-impact resistant,laminated glass.

• The 70/30 split front windshieldopens with the upper portion able tobe stored out of the way above theoperator. The lower front windshieldfeatures a rounded design to maximizedownward visibility and improveswiper coverage. This windshieldoption also features the one-touchaction release system.

• The roof of the cab provides anadditional viewing pane with askylight for added upward visibility.Direct sunlight is diverted with theretractable sunshield.

Monitor. The new compact color monitordisplays information in the local languagethat is easy to read and understand.Functions include the following:

• Five programmable “quick access”buttons for one-touch selection offavorite functions.

• Filter and oil change warningsdisplayed when the number of hoursreaches the maintenance interval.

• Tool select functionality, allowingthe operator to select up to ten pre-defined hydraulic work tools.

• Travel motor retarder selection tochoose between three levels ofaggressiveness in braking once thetravel pedal is released.

• Rear camera viewing capabilitiesfrom the optional camera mountedon the counterweight.

New Deluxe Seat. The new optionaldeluxe seat, equipped with an ActiveSeat Climate System, improves operatorcomfort. Cooled air flows through theseat cushions to reduce bodyperspiration. On cold days, a two-stepseat heater keeps the operator warm andcomfortable. The fully adjustable seatwith adjustable lumbar supportautomatically takes into considerationthe driver’s weight, providing a morerelaxed environment within the cab.

Heated Mirrors. Heated mirrors provideincreased visibility in cold operatingconditions as well as offering furthersafety considerations for those workingaround the machine.

Wipers. The parallel wiper systemmaximizes visibility in poor weatherconditions. The wiper covers practicallythe entire front windshield, cleaning theoperator’s immediate line of sight.

Lunch Box. A large, cooled storagecompartment is located behind theoperator’s seat. The compartmentprovides sufficient room to store itemssuch as a lunch box. An optional coversecures the contents during machineoperation.

Foot Pedals. Two-way pedals for travel,brake and auxiliary circuits provideincreased floor space, reducing the needto change positions. The foot pedal forthe auxiliary high-pressure circuit canbe locked in the off position and used asa footrest for greater operator comfort.

7

8

Hydraulic Cab Riser. The Hydraulic CabRiser (HCR) design provides the mostsuitable solution when high flexibility incab height is needed. Main features ofthe hydraulic riser include the following:

• Stability – The lift arms on the HCRare a wide and deep box-sectioneddesign with improved top andbottom links for greater cab stability.Further stability is achieved with thehelp of the retractable hydrauliccylinders used to raise the cab.

• Speed – Two heavy-duty hydrauliccylinders provide quicker and morecontrolled up and down travel thanseen in the C-Series.

• Comfort – The parallelogram designof the linkage allows the cab toremain level at all ranges of motion.HCR movement is also slowed asthe cab reaches the end of the riserstroke, eliminating the effects of asudden start/stop.

• Safety – In the event of a hydraulicmalfunction, the cab can be loweredusing either a lever inside the cab orone on the frame at ground level.

Bottom Position. The bottom position isused for shipping and travel, allowingfor safer transporting.

Elevated CabHydraulic cab risers are available to maximize viewing to all sides of the machine.

Top Position. The top position raises thecab by 2400 mm (94.5 in). This providesoptimal viewing for all materialhandling jobs.

9

Undercarriage Options. Effectivehydraulic line routing, transmissionprotection and heavy-duty axles makeCaterpillar’s undercarriages perfectfor material handler applications.The D-Series M318D MH comeswith the option of three differentundercarriages in order to providethe greatest stability while performingyour material handler jobs.

• Material Handling – A new, standarddesign for the D-Series, the MaterialHandling Undercarriage with fourwelded outriggers is ideal for theextra stability needed, especiallywhen using a Hydraulic Cab Riser.

• Material Handling with Dozer Blade– An optional expansion to theMaterial Handling Undercarriagedescribed above with an additionalDozer Blade mounted ahead of thefront stabilizers to be used to pushmaterial commonly encountered inwaste and mill yard applications.

• Pin-On/Bolt-On – An optionalundercarriage, the pin-on/bolt-onoption allows for different kindsof stabilizers to be attached to thefront and rear of the machine.

Heavy-Duty Axles. The front axle offerswide oscillating and steering angles.The transmission is mounted directly onthe rear axle for protection and optimumground clearance.

Advanced Disc Brake System. The discbrake system acts directly on the hubinstead of the drive shaft to avoidplanetary gear backlash. This solutioneliminates the rocking effect associatedwith working free on wheels.

Drive Line Concept. The M318D MHDriveline design effectively utilizesthe 19% increase in engine torqueand 10% increase in power to providea comfortable ride with improvedsmoothness, hydraulic retarding, andgear shifting commonly used duringtravel between material handling jobs.

Ground Clearance. A compactundercarriage design provides theM318D MH with optimum groundclearance during travel.

UndercarriageUndercarriage and axle design provides maximum strength, flexibility and mobility on wheels.

MH Booms and Sticks. The MH boomshave been redesigned to handle increasedlifting capacities. The new stick rangeoffers leading side plates to maximize theprotection of hydraulic lines. The linesare fitted in between the two side platesoffering protection from damage.Multiple boom and stick options allowyou to pick the best match for your job.

MH Booms. A specially designed MHboom is available to meet the functionalityrequirements demanded in materialhandling applications. The boomarrangements include high pressurehydraulic lines for opening and closingfunctionality and medium pressurelines for implement rotation.

MH Sticks. Two options of MH sticksare available for the M318D MH, allequipped with high and medium pressureauxiliary lines. The 4900 mm (193 in)Drop Nose Stick offers the reaching andlifting capabilities required for typicalMH applications, while the 4200 mm(165 in) Straight Stick is the bestsolution for when additional worktool functionality is needed.

Special Applications. The M318D MHcan be further outfitted with additionalboom and stick options (see OptionalEquipment), offering the ability tocombine the material handler’s hydrauliccab riser with traditional excavatorfunctionality. This combination hasbeen proven in transfer station, mining,and mill yard applications.

Booms and SticksDesigned for maximum flexibility to keep production high on all jobs.

10

11

Tool Control. Ten hydraulic pumpflow and pressure settings can be presetwithin the monitor, eliminating the needto adjust the hydraulics each time a toolis changed. Selecting the proper settingfrom the monitor menu instantly providesthe operator with the correct amount offlow and pressure for the tool.

Orange Peel Grapple. The most commontool for material handling applications,this grapple is available in a range ofsizes and provides a solution for avariety of material types. The grappleis free swinging and has unlimited leftand right rotation.

Multi-Grapple. The Multi-Grapple withunlimited left and right rotation is theideal tool for stripping, sorting, handlingand loading. For the best control inforward and backward grapple mobility,pair the Multi-Grapple with the MHStraight Stick and linkage.

Joystick Steering. The unique joysticksteering option enables an operator toreposition the machine while travelingin first gear by the use of the slider switchon the right joystick. This enablesthe operator to keep both hands onthe joysticks while simultaneouslymoving the implements and traveling.The operator can do more precise workfaster with increased safety aroundthe machine.

Ride Control. New for the D-Series, theRide Control System improves operatorcomfort and allows the machine totravel faster over rough terrain withimproved ride quality. Accumulatorsdampen the motion at the front of themachine due to the long booms andsticks associated with material handlingwork, allowing the operator to insteadfocus on the speed and direction oftravel between locations. Ride controlcan be activated through a button locatedon the soft switch panel in the cab.

Control Settings. Two selectable controlsettings are available to choose from inorder to get the best power output fromthe engine and hydraulics and maintainoptimum fuel efficiency.

• Economy Mode – for precise materialhandling and loading with the addedbenefit of reduced fuel consumption.

• Power Mode – for applicationsrequiring fast volume loading andmaterial casting.

Automatic Travel Mode. Automaticallyengaged when the travel pedal is depressedthis mode provides maximum speed,drawbar pull and best in class fuelefficiency.

Product Link. Product Link, nowstandard, can assist with FleetManagement to keep track of hours,location, security and product health.

Machine Security. An optional MachineSecurity System is available from thefactory. This system controls who canoperate the machine when, and utilizesspecific keys to prevent unauthorizedmachine use.

VersatilityA wide variety of optional factory-installed attachments are available to enhanceperformance and improve job site management.

Fuel Efficiency. The D-Series WheelMaterial Handlers are designed foroutstanding performance with high fuelefficiency. This means more work donein a day, less fuel consumed and minimalimpact on our environment.

Low Exhaust Emissions. The U.S. EPATier 3 compliant Cat C6.6 offersincreased performance and reliabilitywhile reducing fuel consumption andexhaust emissions.

Quiet Operation. Operator and spectatornoise levels are extremely low as aresult of the new variable speed fanand remote cooling system.

Biodegradable Hydraulic Oil.The optional biodegradable hydraulicoil (HEES™ oil) is formulated toprovide excellent high-pressure andhigh-temperature characteristics, andis fully compatible with all hydrauliccomponents. HEES oil is fullydecomposed by soil or watermicroorganisms, providing a moreenvironmentally-sound alternativeto mineral-based oils.

Fewer Leaks and Spills. Lubricant fillersand drains are designed to minimizespills. Cat O-Ring Face Seals, Cat XT™Hose and hydraulic cylinders are alldesigned to help prevent fluid leaks thatcan reduce the machine performanceand cause harm to the environment.

Longer Service Intervals. Working closelywith your Caterpillar Dealer can helpextend service intervals for engine oil,hydraulic oil, axle oil and coolant.Meaning fewer required fluids andfewer disposals, all adding up to loweroperating costs.

Environmentally Responsible DesignThe M318D MH helps build a better world and preserve the fragile environment.

12

13

Product Support. You will find nearlyall parts requirements at your localCaterpillar dealer parts counter.Cat dealers utilize a world-wide networkto find in-stock parts to minimize yourdowntime. To save money use genuineCat Reman parts. You will receive thesame warranty and reliability as newproducts at a substantial cost savings.

Selection. Make detailed comparisonsof the machines you are consideringbefore you buy. How long do componentslast? What is the cost of preventivemaintenance? Your Cat dealer can giveyou precise answers to these questionsto make sure you operate your machinesat the lowest cost.

Purchase. Consider the financingoptions available as well as day-to-dayoperating costs. This is also the timeto look at dealer services that can be

included in the cost of the machineto yield lower equipment and owningand operating costs over the long run.

Operation. Improving operatingtechniques can boost your profits.Your Cat dealer has videotapes,literature and other ideas to help youincrease productivity, and Caterpillaroffers certified operator training classesto help maximize the return on yourmachine investment.

Maintenance. More and moreequipment buyers are planning foreffective maintenance before buyingequipment. Choose from your dealer’swide range of maintenance services atthe time you purchase your machine.Repair option programs guarantee thecost of repairs up front. Diagnosticprograms such as S•O•SSM Fluid Analysisand Technical Analysis help you avoidunscheduled repairs.

Replacement. Repair, rebuild or replace?Your Cat dealer can help you evaluatethe cost involved so you can make theright choice.

Service Capability. Whether in thedealer’s fully equipped shop or in thefield, you will get highly trained servicetechnicians using the latest technologyand tools.

Services. Customer Service is criticaltoday in every business. That’s why somany people buy Cat equipment. Theyknow they are getting quality, reliabilityand performance backed-up with thebest Customer Service. Your Caterpillardealer offers a wide range of servicesthat can be set up under a CustomerSupport Agreement. The dealer willhelp you choose a plan that can coverthe whole machine including worktools, to help you get the best outof your investment.

Complete Customer SupportCat dealer services help you operate longer with lower costs.

Ground Level Maintenance. Caterpillardesigned its D-Series Wheel MaterialHandlers with the operator and servicetechnician in mind. Gull-wing doors,with pneumatically-assisted liftcylinders, effortlessly lift up to allowcritical maintenance to be performedquickly and efficiently whilemaintaining safety.

Extended Service Intervals. The D-SeriesWheel Material Handler service andmaintenance intervals have been extendedto reduce machine service time, increasemachine availability and reduce operatingcosts. Using S•O•SSM fluid analysis,hydraulic oil change intervals can beextended up to 4,000 hours. Enginecoolant change intervals are 12,000 hourswith Cat Extended Life Coolant.

Self-Monitoring System with Auto-Diagnostics. The electronic engineand machine controllers provide detaileddiagnostic capability for the servicetechnicians. The ability to store activeand intermittent indicators simplifiesproblem diagnosis and reduces totalrepair time, resulting in improvedmachine availability and loweroperating cost.

Engine Inspection. The engine can beaccessed from both ground level and theupper structure. The longitudinal layoutensures that all daily inspection itemscan be accessed easily.

Front Compartment. The frontcompartment hood can be openedvertically, providing outstanding groundlevel access to the batteries, air-to-airafter cooler, air conditioner condenserand the air cleaner filter.

Easy to Clean Coolers. Flat fins on allcoolers reduce clogging, making it easierto remove debris. The main cooling fanand air conditioner condenser are bothhinged for easier cleaning.

Swing-out Air Conditioner Condenser.The Air Conditioning condenser swingsout horizontally to allow completecleaning on both sides as well as excellentaccess to the air-to-air after cooler.

Air Filter. Caterpillar air filters eliminatethe use of service tools, reducingmaintenance time. The air filter featuresa double-element construction with wallflow filtration in the main element andbuilt-in mini-cyclone precleaners forsuperior cleaning efficiency. The airfilters are constantly monitored foroptimum performance. If airflow becomesrestricted, a warning is displayed by theway of the in-cab monitor.

Capsule Filter. The hydraulic return filter,a capsule filter, prevents contaminantsfrom entering the system when thehydraulic oil is changed

Fuel Filters. Cat high efficiency fuelfilters with a Stay-Clean Valve™features a special media that removesmore than 98 percent of particles,increasing fuel injector life. Both theprimary and secondary fuel filters arelocated in the engine compartment andcan be easily changed from ground level.

New Auto-Lube System. The newAutomatic Lubrication System providesthe optimal amount of grease to all themain lubrication points. The configurablelubrication interval and system statusmessages can be accessed via the in-cabmonitor.

14

Simplified and easy maintenance saves you time and money.

Serviceability

Scheduled Oil Sampling. Caterpillarhas specially developed S•O•SSM OilSampling Analysis to help ensure betterperformance, longer life and increasedcustomer satisfaction. This thoroughand reliable early warning systemdetects traces of metals, dirt and othercontaminants in your engine, axleand hydraulic oil. It can predictpotential trouble avoiding costly failures.Your Caterpillar dealer can give youresults and specific recommendationsshortly after receiving your sample.

Engine Oil. Caterpillar engine oil isformulated to optimize engine life andperformance. The specially formulatedoil is more cost effective and increasesengine oil change interval to 500 hours,providing industry leading performanceand savings.

Water Separator. The D Series isequipped with a primary fuel filter withwater separator located in the enginecompartment. For ease of service, thewater separator can be easily accessedfrom ground level.

Fuel Tank Drain. The durable,corrosion-free tank has a remote drainlocated at the bottom of the upper frameto remove water and sediment. The tankdrain with hose connection allowssimple, spill-free fluid draining.

Remote Greasing Blocks. For those hardto reach locations, greasing blocks havebeen provided to reduce maintenancetime. One block is located in the enginecompartment with two grease pointsfor the swing bearing and front-endattachment. For the undercarriage,two remote blocks provide easy accessfor greasing the oscillating axle and,as an option, the dozer blade.

New LED Rear Lights. Optional LightEmitting Diode (LED) Rear Lightsreplace the standard lights, for increasedvisibility on the job site, higher durabilityand longer life.

Handrails and Steps. Large handrailsand steps assist the operator in climbingon and off the machine safely.

Storage Boxes. There are two toolboxesintegrated in the steps of the undercarriage.

Anti-Skid Plate. The Anti-Skid Platescover the top of the steps and upperstructure to help prevent slippingduring maintenance. They reduce theaccumulation of debris on the upperstructure, improving the cleanlinessand safety of the machine.

15

16 M318D Material Handler specifications

Undercarriage

Ground Clearance 380 mm 15 inMaximum Steering Angle ±35°Oscillating Axle Angle ±6°Standard Axle Turning Radius

Outside of tire 6.8 m 22 ftEnd of VA Boom 7.8 m 25 ft 6 inEnd of One-Piece Boom 9.3 m 30 ft 6 in

Weights

Operating Weight 21 100 kg (46,518 lb) to23 425 kg (51,643 lb)

Material Handling BoomMH undercarriage 4 welded 21 450 kg 47,289 lboutriggersMH undercarriage 4 welded 22 125 kg 48,777 lboutriggers, push bladeRear Dozer only 20 300 kg 44,754 lbRear Dozer, front outriggers 21 500 kg 47,399 lbFront and Rear outriggers 21 850 kg 48,171 lb

VA BoomMH undercarriage 4 welded 21 800 kg 48,061 lboutriggersMH undercarriage 4 welded 22 475 kg 49,549 lboutriggers, push bladeRear Dozer only 20 650 kg 45,525 lbRear Dozer, front outriggers 21 850 kg 48,171 lbFront and Rear outriggers 22 200 kg 48,943 lb

One-Piece BoomMH undercarriage 4 welded 21 200 kg 46,738 lboutriggersMH undercarriage 4 welded 21 875 kg 48,226 lboutriggers, push bladeRear Dozer only 20 050 kg 44,203 lbRear Dozer, front outriggers 21 250 kg 46,848 lbFront and Rear outriggers 21 600 kg 47,620 lb

MH Push Blade 675 kg 1,488 lbDozer Blade 770 kg 1,698 lbOutriggers 1030 kg 2,271 lbCounterweight 4000 kg 8,818 lb4.2 m (13'9") MH Straight stick 940 kg 2,072 lb4.9 m (16'1") MH Drop Nose stick 840 kg 1,852 lb2.2 m (7'3") Digging stick 550 kg 1,213 lb2.5 m (8'3") Digging stick 580 kg 1,279 lb2.8 m (9'3") Digging stick 600 kg 1,323 lb3.3 m (10'10") Industrial stick 520 kg 1,146 lb

Engine

Engine Model Cat® C6.6 ACERT™Gross Power 130 kW 174 hp ISO 9249 124 kW 166 hp EEC 80/1269 124 kW 166 hp Bore 105 mm 4 in Stroke 127 mm 5 inDisplacement 6.6 L 403 in3

Max Torque at 1,400 rpm 805 N·m 594 lb ft

• Maximum power at rated speed of 1,800 rpm

Hydraulic System

Maximum PressureImplement circuit

normal 35 000 kPa 5,076 psiheavy lift 37 500 kPa 5,439 psi

Travel circuit 35 000 kPa 5,076 psiAuxiliary circuit

high pressure 35 000 kPa 5,076 psimedium pressure 20 000 kPa 2,900 psi

Swing mechanism 31 000 kPa 4,496 psiMaximum Flow

Implement/travel circuit 290 L/min 77 gal/minAuxiliary circuit

high pressure 250 L/min 66 gal/minmedium pressure 50 L/min 13 gal/min

Swing mechanism 112 L/min 30 gal/min

Transmission

Maximum Travel Speed 25 km/h 16 mph1st Gear, Forward/Reverse 8 km/h 5 mph2nd Gear, Forward/Reverse 25 km/h 16 mphCreeper Speed (1st gear) 3 km/h 2 mphCreeper Speed (2nd gear) 13 km/h 8 mphDrawbar Pull 103 kN 23,155 lbMaximum Gradeability 47%

17

Swing Mechanism

Swing Speed 10.5 rpmSwing Torque 46 kN·m 33,928 lb ft

Service Refill Capacities

Fuel Tank Capacity 310 L 82 galCooling System max. 32 L 8 galEngine Crankcase with filter 15 L 4 galRear Axle 14.5 L 3.8 galFront Steering Axle 11 L 3 galFinal Drive 2.5 L 0.66 galPowershift Transmission 2.5 L 0.66 galHydraulic Tank Capacity 170 L 45 gal Hydraulic System Capacity 270 L 71 gal(including tank)

Sound Performance

Performance ANSI/SAE J1166 OCT 98Exterior sound power level 103 db(A) 103 db(A)for M300D series according2000/14/EC Interior sound pressure level 72 db(A) 72 db(A)LpA (in the cab)

• When properly installed and maintained, the cab offered byCaterpillar, when tested with doors and windows closedaccording to ANSI/SAE J1166 OCT 98, meets OSHA and MSHArequirements for operator sound exposure limits in effect attime of manufacture.

• Hearing protection may by needed when operating with anopen operator station and cab (when not properly maintainedor doors/windows open) for extended periods or in noisyenvironment.

Standards

Brakes SAE J1026 APR 90Cab/FOGS ISO 10262

M318D Material Handler specifications

18

➤

500 mm1'8"

➤➤ 2750 mm9'0"

➤➤

➤➤925 mm

3'0"

➤➤ 5060 mm16'7"

1300 mm4'3" ➤➤

1110 mm3'8"

➤➤

➤

325 mm1'1"

➤➤ ➤➤ ➤925 mm

3'0"1300 mm

4'3"800 mm

2'8"

➤➤ 5025 mm16'6"

➤

➤

6

➤

➤➤ 2750 mm9'0"

➤➤ 2540 mm8'4"

➤➤ 3

➤➤ 4➤➤ 2

➤➤

1

➤➤ 7

➤

➤

6

➤

5

➤➤ 4

M318D MH M318D MHVA boom One-piece boom

mm ft/in mm ft/in1 Shipping height

2.2 m (7'3") Stick 3324 10'11" 3324 10'11"

2.5 m (8'2") Stick 3324 10'11" 3324 10'11"

2.8 m (9'2") Stick 3324 10'11" 3324 10'11"

2 Shipping length

2.2 m (7'3") Stick 8867 29'1" 8970 29'5"

2.5 m (8'2") Stick 8848 29'0" 8956 29'5"

2.8 m (9'2") Stick 8818 28'11" 8952 29'4"

3 Support point

2.2 m (7'3") Stick 3964 13'0" 3833 12'7"

2.5 m (8'2") Stick 3641 11'11" 3495 11'6"

2.8 m (9'2") Stick 3510 11'6" 3325 10'11"

4 Tail swing radius 2500 8'2" 2500 8'2"

5 Counterweight clearance 1310 4'4" 1310 4'4"

6 Cab height 3240 10'8" 3240 10'8"

with hydraulic cab riser (lowered) 3240 10'8" 3240 10'8"

with hydraulic cab riser (raised) 5640 18'6" 5640 18'6"7 Stabilizer width on ground 3820 12'6" 3820 12'6"

Dimensions with Standard UndercarriageAll dimensions are approximate.

Undercarriage with 2 setsof outriggers

Undercarriage with 1 set of outriggers and dozer


19

➤➤ 4➤➤ 2

➤

➤

1

➤➤ 3

➤

➤

6

290 mm/11"

➤

➤➤ 8

➤

➤➤ 9

➤➤ 10➤➤ 7

➤

➤

6

➤

➤

5

➤➤ 4

M318D MHMH boom

mm ft/in1 Shipping height

4.2 m (13'9") straight stick 3400 11'2"

4.9 m (16'1") drop nose 3400 11'2"

2 Shipping length

4.2 m (13'9") straight stick 9061 29'9"

4.9 m (16'1") drop nose 9061 29'9"

3 Support point

4.2 m (13'9") straight stick 3162 10'4"

4.9 m (16'1") drop nose 2720 8'11"

4 Tail swing radius 2500 8'2"

5 Counterweight clearance 1310 4'4"

6 Cab height

with hydraulic cab riser (lowered) 3240 10'8"

with hydraulic cab riser (raised) 5640 18'6"

7 Wheel base 2750 9'0"

8 Undercarriage width 2990 9'10"

9 Stabilizer width on ground 4360 14'4"

10 Undercarriage length 5250 17'3"

Dimensions with MH UndercarriageAll dimensions are approximate.


20

10 9 8 7 6 5 4 3 2 1 0 21 Meters

Feet35 30

11

25 20 15 10 5 50

1

2

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

11

12

13

MetersFeet

0

5

5

10

15

20

25

30

35

40

45

4.9 m (16'1")

10 9 8 7 6 5 4 3 2 1 0 21 Meters

Feet35 30

11

25 20 15 10 5 50

1

2

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

11

12

13

MetersFeet

0

5

5

10

15

20

25

30

35

40

45

4.2 m (13'9")

Undercarriage Material Handling Material HandlingBoom Length 6.2 m (20'4") 6.2 m (20'4")Stick Length MH drop nose 4.9 m (16'1") MH straight stick 4.2 m (13'9")

Maximum Height 12 040 mm (39'6") 11 490 mm (37'9")

Minimum Dump Height 3690 mm (12'1") 4330 mm (14'3")

1 Maximum Reach 11 000 mm (36'1") 10 350 mm (34'0")

2 Maximum Reach at Ground Level 10 620 mm (34'10") 10 180 mm (33'5")

3 Maximum Depth 2190 mm (7'2") 1480 mm (4'10")

Working Ranges – M318D MH


21

UNDERCARRIAGE – Material Handling BOOM – 6.2 m (20'4") STICK – 4.2 m (13'9") Straight

English Units/all weights are in lb

* Indicates the load is hydraulically limited.• Lift capacity ratings are based on ISO 10567 standards.• Rated loads do not exceed 87% of the hydraulic lifting capacity or 75% of tipping.• All weights are calculated at stick nose and without work tool installed.• Oscillating axle must be locked.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Lift Capacities – M318D MH

Load atMaximum Reach

Load PointHeight

Load RadiusOver Front

Load RadiusOver Side

10.5 m 2 sets of stabilizers raised kg *8400 65502 sets of stabilizers lowered kg *8400 *8400

9.0 m 2 sets of stabilizers raised kg 5650 42502 sets of stabilizers lowered kg *8350 *8350

7.5 m 2 sets of stabilizers raised kg 5650 4300 3950 2950 3100 2300 8.64 m2 sets of stabilizers lowered kg *8600 *8600 *7350 6250 *5200 4900

6.0 m 2 sets of stabilizers raised kg 8850 6550 5550 4200 3900 2950 2900 2150 2650 1950 9.46 m2 sets of stabilizers lowered kg *10 900 *10 900 *8800 *8800 *7400 6200 5700 4600 *5050 4250

4.5 m 2 sets of stabilizers raised kg *14 800 11 750 8400 6150 5350 4000 3800 2800 2850 2100 2400 1750 10.00 m2 sets of stabilizers lowered kg *14 800 *14 800 *11 850 *11 850 *9200 8750 *7500 6100 5650 4550 4750 3850

3.0 m 2 sets of stabilizers raised kg 7800 5600 5100 3700 3650 2700 2800 2050 2250 1650 10.28 m2 sets of stabilizers lowered kg *12 850 *12 850 *9550 8400 7400 5900 5550 4500 4550 3650

1.5 m 2 sets of stabilizers raised kg 7250 5100 4800 3450 3500 2550 2700 1950 2200 1600 10.34 m2 sets of stabilizers lowered kg *12 900 *12 900 *9500 8100 7250 5750 5500 4400 *4300 3600

Ground 2 sets of stabilizers raised kg 6900 4800 4600 3300 3400 2450 2650 19002 sets of stabilizers lowered kg *9650 *9650 *8800 7850 *6800 5650 *5150 4350

Undercarriage configuration

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

UNDERCARRIAGE – Material Handling BOOM – 6.2 m (20'4") STICK – 4.2 m (13'9") Straight

Metric Units/all weights are in kg

35.0 ft 2 sets of stabilizers raised lb *18,519 14,4402 sets of stabilizers lowered lb *18,519 *18,519

30.0 ft 2 sets of stabilizers raised lb 12,456 9,3702 sets of stabilizers lowered lb *18,409 *18,409

25.0 ft 2 sets of stabilizers raised lb 12,456 9,480 8,708 6,504 6,834 5,071 28'4"2 sets of stabilizers lowered lb *18,960 *18,960 *16,204 13,779 *11,464 10,803

20.0 ft 2 sets of stabilizers raised lb 19,511 14,440 12,236 9,259 8,598 6,504 6,393 4,740 5,842 4,299 31'0"2 sets of stabilizers lowered lb *24,030 *24,030 *19,401 *19,401 *16,314 13,669 12,566 10,141 *11,133 9,370

15.0 ft 2 sets of stabilizers raised lb *32,628 25,904 18,519 13,558 11,795 8,818 8,378 6,173 6,283 4,630 5,291 3,858 32'10"2 sets of stabilizers lowered lb *32,628 *32,628 *26,125 *26,125 *20,283 19,290 *16,535 13,448 12,456 10,031 10,472 8,488

10.0 ft 2 sets of stabilizers raised lb 17,196 12,346 11,244 8,157 8,047 5,952 6,173 4,519 4,960 3,638 33'9"2 sets of stabilizers lowered lb *28,329 *28,329 *21,054 18,519 16,314 13,007 12,236 9,921 10,031 8,047

5.0 ft 2 sets of stabilizers raised lb 15,984 11,244 10,582 7,606 7,716 5,622 5,952 4,299 4,850 3,527 33'11"2 sets of stabilizers lowered lb *28,440 *28,440 *20,944 17,857 15,984 12,677 12,125 9,700 *9,480 7,937

Ground 2 sets of stabilizers raised lb 15,212 10,582 10,141 7,275 7,496 5,401 5,842 4,1892 sets of stabilizers lowered lb *21,275 *21,275 *19,401 17,306 *14,991 12,456 *11,354 9,590


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft


22

UNDERCARRIAGE – Material Handling BOOM – 6.2 m (20'4") STICK – 4.9 m (16'1") Drop Nose






Load PointHeight



10.5 m 2 sets of stabilizers raised kg 5750 43502 sets of stabilizers lowered kg *6500 *6500

9.0 m 2 sets of stabilizers raised kg 5850 4450 4100 31002 sets of stabilizers lowered kg *7850 *7850 *6300 *6300

7.5 m 2 sets of stabilizers raised kg 5850 4450 4100 3150 3050 2300 2800 2100 9.42 m2 sets of stabilizers lowered kg *8200 *8200 *7150 6400 *5500 4750 *4450 4400

6.0 m 2 sets of stabilizers raised kg 5750 4350 4050 3100 3050 2300 2450 1850 10.18 m2 sets of stabilizers lowered kg *8450 *8450 *7250 6350 5850 4750 *4300 3900

4.5 m 2 sets of stabilizers raised kg 8750 6450 5550 4150 3950 2950 3000 2250 2350 1700 2250 1650 10.68 m2 sets of stabilizers lowered kg *11 200 *11 200 *8950 *8950 *7450 6250 5800 4700 4550 3700 *4350 3600

3.0 m 2 sets of stabilizers raised kg 16 200 10 950 8150 5900 5250 3900 3800 2850 2900 2150 2300 1700 2150 1550 10.94 m2 sets of stabilizers lowered kg *18 650 *18 650 *12 450 *12 450 *9450 8600 7550 6050 5700 4600 4500 3650 4200 3450

1.5 m 2 sets of stabilizers raised kg 7550 5350 5000 3650 3650 2700 2800 2050 2250 1650 2100 1550 11.00 m2 sets of stabilizers lowered kg *13 100 *13 100 *9650 8300 7350 5900 5600 4500 4450 3600 4150 3350

Ground 2 sets of stabilizers raised kg *3500 *3500 7100 4950 4750 3400 3500 2550 2750 2000 2200 16002 sets of stabilizers lowered kg *3500 *3500 *12 200 *12 200 *9300 8000 7200 5750 5500 4450 *4100 3550

–1.5 m 2 sets of stabilizers raised kg 6900 4800 4600 3300 3400 2450 2700 19502 sets of stabilizers lowered kg *9600 *9600 *8100 7850 *6300 5650 *4750 4350


3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m

UNDERCARRIAGE – Material Handling BOOM – 6.2 m (20'4") STICK – 4.9 m (16'1") Drop Nose


35.0 ft 2 sets of stabilizers raised lb 12,677 9,5902 sets of stabilizers lowered lb *14,330 *14,330

30.0 ft 2 sets of stabilizers raised lb 12,897 9,811 9,039 6,8342 sets of stabilizers lowered lb *17,306 *17,306 *13,889 *13,889

25.0 ft 2 sets of stabilizers raised lb 12,897 9,811 9,039 6,945 6,724 5,071 6,173 4,630 30'11"2 sets of stabilizers lowered lb *18,078 *18,078 *15,763 14,110 *12,125 10,472 *9,811 9,700

20.0 ft 2 sets of stabilizers raised lb 12,677 9,590 8,929 6,834 6,724 5,071 5,401 4,079 33'5"2 sets of stabilizers lowered lb *18,629 *18,629 *15,984 13,999 12,897 10,472 *9,480 8,598

15.0 ft 2 sets of stabilizers raised lb 19,290 14,220 12,236 9,149 8,708 6,504 6,614 4,960 5,181 3,748 4,960 3,638 35'0"2 sets of stabilizers lowered lb *24,692 *24,692 *19,731 *19,731 *16,424 13,779 12,787 10,362 10,031 8,157 *9,590 7,937

10.0 ft 2 sets of stabilizers raised lb 35,715 24,141 17,968 13,007 11,574 8,598 8,378 6,283 6,393 4,740 5,071 3,748 4,740 3,417 35'11"2 sets of stabilizers lowered lb *41,116 *41,116 *27,448 *27,448 *20,834 18,960 16,645 13,338 12,566 10,141 9,921 8,047 9,259 7,606

5.0 ft 2 sets of stabilizers raised lb 16,645 11,795 11,023 8,047 8,047 5,952 6,173 4,519 4,960 3,638 4,630 3,417 36'1"2 sets of stabilizers lowered lb *28,881 *28,881 *21,275 18,298 16,204 13,007 12,346 9,921 9,811 7,937 9,149 7,385

Ground 2 sets of stabilizers raised lb *7,716 *7,716 15,653 10,913 10,472 7,496 7,716 5,622 6,063 4,409 4,850 3,5272 sets of stabilizers lowered lb *7,716 *7,716 *26,896 *26,896 *20,503 17,637 15,873 12,677 12,125 9,811 *9,039 7,826

–5.0 ft 2 sets of stabilizers raised lb 15,212 10,582 10,141 7,275 7,496 5,401 5,952 4,2992 sets of stabilizers lowered lb *21,164 *21,164 *17,857 17,306 *13,889 12,456 *10,472 9,590


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft 35.0 ft


23

UNDERCARRIAGE – Standard BOOM – 6.2 m (20'4") STICK – 4.2 m (13'9") Straight


35.0 ft 2 sets of stabilizers lowered lb *18,519 *18,519Rear dozer raised lb *18,519 13,228Rear dozer lowered b *18,519 14,991Rear stabilizer lowered lb *18,519 18,188F. stabilizer & r. dozer lowered lb *18,519 *18,519

30.0 ft 2 sets of stabilizers lowered lb *18,409 16,535Rear dozer raised lb 12,566 8,598Rear dozer lowered b *18,409 9,700Rear stabilizer lowered lb *18,409 11,574F. stabilizer & r. dozer lowered lb *18,409 14,220

25.0 ft 2 sets of stabilizers lowered lb *18,960 16,535 *16,204 11,464 *11,464 8,929 28'4"Rear dozer raised lb 12,677 8,598 8,818 5,952 6,834 4,519Rear dozer lowered b *18,960 9,700 14,440 6,724 11,244 5,181Rear stabilizer lowered lb 18,850 11,574 12,787 8,047 9,921 6,283F. stabilizer & r. dozer lowered lb *18,960 14,220 *16,204 9,921 *11,464 7,826

20.0 ft 2 sets of stabilizers lowered lb *24,030 *24,030 *19,401 16,314 16,204 11,354 11,905 8,378 10,913 7,716 31'0"Rear dozer raised lb 19,842 13,228 12,456 8,378 8,708 5,842 6,393 4,189 5,842 3,858Rear dozer lowered b *24,030 14,991 *19,401 9,480 14,330 6,614 10,582 4,850 9,700 4,409Rear stabilizer lowered lb *24,030 18,078 18,519 11,354 12,677 7,937 9,259 5,842 8,488 5,291F. stabilizer & r. dozer lowered lb *24,030 22,597 *19,401 13,999 16,094 9,811 11,795 7,275 10,913 6,724

15.0 ft 2 sets of stabilizers lowered lb *32,628 *32,628 *26,125 25,684 *20,283 15,763 15,984 11,023 11,795 8,267 10,031 7,055 32'10"Rear dozer raised lb *32,628 23,810 18,850 12,346 11,905 7,937 8,488 5,622 6,283 4,079 5,291 3,417Rear dozer lowered b *32,628 27,778 *26,125 14,110 *20,283 9,039 14,110 6,393 10,472 4,740 8,818 3,968Rear stabilizer lowered lb *32,628 *32,628 *26,125 17,196 17,968 10,913 12,346 7,716 9,259 5,732 7,716 4,740F. stabilizer & r. dozer lowered lb *32,628 *32,628 *26,125 21,605 *20,283 13,558 15,763 9,590 11,685 7,165 9,921 6,063

10.0 ft 2 sets of stabilizers lowered lb *28,329 24,141 *21,054 15,102 15,543 10,692 11,685 8,157 9,480 6,614 33'9"Rear dozer raised lb 17,527 11,133 11,354 7,385 8,157 5,291 6,173 3,968 4,960 3,197Rear dozer lowered b *28,329 12,897 19,952 8,488 13,669 6,063 10,251 4,519 8,267 3,638Rear stabilizer lowered lb *28,329 15,873 17,196 10,251 12,015 7,385 9,039 5,622 7,385 4,519F. stabilizer & r. dozer lowered lb *28,329 20,172 *21,054 12,897 15,432 9,259 11,574 7,055 9,370 5,732

5.0 ft 2 sets of stabilizers lowered lb *28,440 22,708 *20,944 14,440 15,212 10,362 11,464 7,937 9,370 6,504 33'11"Rear dozer raised lb 16,204 10,031 10,692 6,834 7,826 4,960 5,952 3,858 4,850 3,086Rear dozer lowered b *28,440 11,685 19,180 7,826 13,338 5,732 10,031 4,409 8,157 3,527Rear stabilizer lowered lb 27,227 14,551 16,535 9,700 11,685 7,055 8,818 5,401 7,165 4,409F. stabilizer & r. dozer lowered lb *28,440 18,850 *20,944 12,236 15,102 8,929 11,354 6,834 9,259 5,622

Ground 2 sets of stabilizers lowered lb *21,275 *21,275 *19,401 13,999 14,881 10,141 11,354 7,826Rear dozer raised lb 15,543 9,370 10,251 6,393 7,496 4,740 5,842 3,748Rear dozer lowered

l

l

l

l

l

l

l

lb *21,275 11,023 18,629 7,496 13,007 5,512 9,921 4,299Rear stabilizer lowered lb *21,275 13,889 15,984 9,259 11,354 6,834 8,708 5,291F. stabilizer & r. dozer lowered lb *21,275 18,078 *19,401 11,795 14,771 8,598 11,244 6,724


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft



Load PointHeight






24



Load PointHeight



10.5 m 2 sets of stabilizers lowered kg *8400 *8400Rear dozer raised kg *8400 6000Rear dozer lowered g *8400 6800Rear stabilizer lowered kg *8400 8250F. stabilizer & r. dozer lowered kg *8400 *8400

9.0 m 2 sets of stabilizers lowered kg *8350 7500Rear dozer raised kg 5700 3900Rear dozer lowered g *8350 4400Rear stabilizer lowered kg *8350 5250F. stabilizer & r. dozer lowered kg *8350 6450

7.5 m 2 sets of stabilizers lowered kg *8600 7500 *7350 5200 *5200 4050 8.64 mRear dozer raised kg 5750 3900 4000 2700 3100 2050Rear dozer lowered g *8600 4400 6550 3050 5100 2350Rear stabilizer lowered kg 8550 5250 5800 3650 4500 2850F. stabilizer & r. dozer lowered kg *8600 6450 *7350 4500 *5200 3550

6.0 m 2 sets of stabilizers lowered kg *10 900 *10 900 *8800 7400 7350 5150 5400 3800 4950 3500 9.46 mRear dozer raised kg 9000 6000 5650 3800 3950 2650 2900 1900 2650 1750Rear dozer lowered g *10 900 6800 *8800 4300 6500 3000 4800 2200 4400 2000Rear stabilizer lowered kg *10 900 8200 8400 5150 5750 3600 4200 2650 3850 2400F. stabilizer & r. dozer lowered kg *10 900 10 250 *8800 6350 7300 4450 5350 3300 4950 3050

4.5 m 2 sets of stabilizers lowered kg *14 800 *14 800 *11 850 11 650 *9200 7150 7250 5000 5350 3750 4550 3200 10.00 mRear dozer raised kg *14 800 10 800 8550 5600 5400 3600 3850 2550 2850 1850 2400 1550Rear dozer lowered g *14 800 12 600 *11 850 6400 *9200 4100 6400 2900 4750 2150 4000 1800Rear stabilizer lowered kg *14 800 *14 800 *11 850 7800 8150 4950 5600 3500 4200 2600 3500 2150F. stabilizer & r. dozer lowered kg *14 800 *14 800 *11 850 9800 *9200 6150 7150 4350 5300 3250 4500 2750

3.0 m 2 sets of stabilizers lowered kg *12 850 10 950 *9550 6850 7050 4850 5300 3700 4300 3000 10.28 mRear dozer raised kg 7950 5050 5150 3350 3700 2400 2800 1800 2250 1450Rear dozer lowered g *12 850 5850 9050 3850 6200 2750 4650 2050 3750 1650Rear stabilizer lowered kg *12 850 7200 7800 4650 5450 3350 4100 2550 3350 2050F. stabilizer & r. dozer lowered kg *12 850 9150 *9550 5850 7000 4200 5250 3200 4250 2600

1.5 m 2 sets of stabilizers lowered kg *12 900 10 300 *9500 6550 6900 4700 5200 3600 4250 2950 10.34 mRear dozer raised kg 7350 4550 4850 3100 3550 2250 2700 1750 2200 1400Rear dozer lowered g *12 900 5300 8700 3550 6050 2600 4550 2000 3700 1600Rear stabilizer lowered kg 12 350 6600 7500 4400 5300 3200 4000 2450 3250 2000F. stabilizer & r. dozer lowered kg *12 900 8550 *9500 5550 6850 4050 5150 3100 4200 2550

Ground 2 sets of stabilizers lowered kg *9650 *9650 *8800 6350 6750 4600 5150 3550Rear dozer raised kg 7050 4250 4650 2900 3400 2150 2650 1700Rear dozer lowered

k

k

k

k

k

k

k

kg *9650 5000 8450 3400 5900 2500 4500 1950Rear stabilizer lowered kg *9650 6300 7250 4200 5150 3100 3950 2400F. stabilizer & r. dozer lowered kg *9650 8200 *8800 5350 6700 3900 5100 3050


3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

UNDERCARRIAGE – Standard BOOM – 6.2 m (20'4") STICK – 4.2 m (13'9") Straight





25




35.0 ft 2 sets of stabilizers lowered lb *14,330 *14,330Rear dozer raised lb 12,787 8,818Rear dozer lowered b *14,330 9,921Rear stabilizer lowered lb *14,330 11,795F. stabilizer & r. dozer lowered lb *14,330 *14,330

30.0 ft 2 sets of stabilizers lowered lb *17,306 16,976 *13,889 11,795Rear dozer raised lb 13,118 9,039 9,149 6,283Rear dozer lowered b *17,306 10,141 *13,889 7,055Rear stabilizer lowered lb *17,306 12,015 13,118 8,378F. stabilizer & r. dozer lowered lb *17,306 14,661 *13,889 10,251

25.0 ft 2 sets of stabilizers lowered lb *18,078 16,976 *15,763 11,795 *12,125 8,708 *9,811 8,047 30'11"Rear dozer raised lb 13,118 9,039 9,149 6,283 6,724 4,519 6,173 4,189Rear dozer lowered b *18,078 10,141 14,881 7,055 10,913 5,181 *9,811 4,740Rear stabilizer lowered lb *18,078 12,015 13,118 8,378 9,700 6,173 8,929 5,622F. stabilizer & r. dozer lowered lb *18,078 14,661 *15,763 10,251 *12,125 7,606 *9,811 7,055

20.0 ft 2 sets of stabilizers lowered lb *18,629 16,755 *15,984 11,685 12,236 8,708 *9,480 7,165 33'5"Rear dozer raised lb 12,787 8,818 9,039 6,173 6,724 4,519 5,401 3,638Rear dozer lowered b *18,629 9,921 14,771 6,945 10,913 5,071 8,818 4,079Rear stabilizer lowered lb *18,629 11,795 13,007 8,267 9,590 6,173 7,826 4,960F. stabilizer & r. dozer lowered lb *18,629 14,440 *15,984 10,141 12,125 7,606 *9,480 6,173

15.0 ft 2 sets of stabilizers lowered lb *24,692 *24,692 *19,731 16,204 16,314 11,354 12,125 8,598 9,480 6,724 9,259 6,504 35'0"Rear dozer raised lb 19,621 13,007 12,346 8,378 8,708 5,952 6,614 4,409 5,181 3,307 4,960 3,197Rear dozer lowered b *24,692 14,771 *19,731 9,480 14,440 6,724 10,692 4,960 8,378 3,858 8,157 3,748Rear stabilizer lowered lb *24,692 17,857 18,409 11,354 12,677 8,047 9,480 5,952 7,385 4,630 7,165 4,519F. stabilizer & r. dozer lowered lb *24,692 22,267 *19,731 13,999 16,204 9,921 12,015 7,496 9,370 5,842 9,149 5,732

10.0 ft 2 sets of stabilizers lowered lb *41,116 *41,116 *27,448 25,022 *20,834 15,543 15,873 11,023 11,905 8,378 9,370 6,614 8,818 6,283 35'11"Rear dozer raised lb 37,258 22,046 18,298 11,905 11,795 7,826 8,378 5,622 6,393 4,189 5,071 3,307 4,740 3,086Rear dozer lowered b *41,116 26,015 *27,448 13,558 20,393 8,818 13,999 6,393 10,472 4,850 8,267 3,748 7,716 3,527Rear stabilizer lowered lb *41,116 33,180 *27,448 16,535 17,747 10,692 12,346 7,716 9,259 5,842 7,275 4,630 6,834 4,299F. stabilizer & r. dozer lowered lb *41,116 *41,116 *27,448 20,944 *20,834 13,338 15,763 9,590 11,795 7,275 9,259 5,732 8,708 5,401

5.0 ft 2 sets of stabilizers lowered lb *28,881 23,479 *21,275 14,881 15,543 10,692 11,685 8,157 9,259 6,504 8,708 6,173 36'1"Rear dozer raised lb 16,865 10,692 11,133 7,165 8,047 5,291 6,173 4,079 4,960 3,197 4,630 2,976Rear dozer lowered b *28,881 12,346 19,621 8,267 13,669 6,063 10,251 4,630 8,157 3,638 7,606 3,417Rear stabilizer lowered lb 27,999 15,212 16,976 10,031 11,905 7,275 9,039 5,622 7,275 4,519 6,724 4,189F. stabilizer & r. dozer lowered lb *28,881 19,511 *21,275 12,677 15,322 9,149 11,574 7,055 9,149 5,622 8,598 5,291

Ground 2 sets of stabilizers lowered lb *7,716 *7,716 *26,896 22,377 *20,503 14,330 15,102 10,362 11,464 8,047 *9,039 6,504Rear dozer raised lb *7,716 *7,716 15,984 9,811 10,582 6,724 7,826 4,960 6,063 3,858 4,850 3,086Rear dozer lowered b *7,716 *7,716 *26,896 11,464 18,960 7,716 13,338 5,732 10,141 4,519 8,047 3,638Rear stabilizer lowered lb *7,716 *7,716 26,786 14,330 16,314 9,480 11,574 7,055 8,929 5,512 7,165 4,409F. stabilizer & r. dozer lowered lb *7,716 *7,716 *26,896 18,519 *20,503 12,125 14,991 8,929 11,354 6,945 *9,039 5,622

–5.0 ft 2 sets of stabilizers lowered lb *21,164 *21,164 *17,857 13,999 *13,889 10,141 *10,472 7,937Rear dozer raised lb 15,543 9,370 10,251 6,393 7,606 4,850 5,952 3,748Rear dozer lowered

l

l

l

l

l

l

l

l

lb *21,164 11,023 *17,857 7,496 13,118 5,512 10,031 4,409Rear stabilizer lowered lb *21,164 13,889 15,984 9,259 11,354 6,834 8,818 5,401F. stabilizer & r. dozer lowered lb *21,164 18,078 *17,857 11,795 *13,889 8,708 *10,472 6,834


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft 35.0 ft



Load PointHeight



UNDERCARRIAGE – Standard BOOM – 6.2 m (20'4") STICK – 4.9 m (16'1") Drop Nose


26



Load PointHeight



10.5 m 2 sets of stabilizers lowered kg *6500 *6500Rear dozer raised kg 5800 4000Rear dozer lowered g *6500 4500Rear stabilizer lowered kg *6500 5350F. stabilizer & r. dozer lowered kg *6500 *6500

9.0 m 2 sets of stabilizers lowered kg *7850 7700 *6300 5350Rear dozer raised kg 5950 4100 4150 2850Rear dozer lowered g *7850 4600 *6300 3200Rear stabilizer lowered kg *7850 5450 5950 3800F. stabilizer & r. dozer lowered kg *7850 6650 *6300 4650

7.5 m 2 sets of stabilizers lowered kg *8200 7700 *7150 5350 *5500 3950 *4450 3650 9.42 mRear dozer raised kg 5950 4100 4150 2850 3050 2050 2800 1900Rear dozer lowered g *8200 4600 6750 3200 4950 2350 *4450 2150Rear stabilizer lowered kg *8200 5450 5950 3800 4400 2800 4050 2550F. stabilizer & r. dozer lowered kg *8200 6650 *7150 4650 *5500 3450 *4450 3200

6.0 m 2 sets of stabilizers lowered kg *8450 7600 *7250 5300 5550 3950 *4300 3250 10.18 mRear dozer raised kg 5800 4000 4100 2800 3050 2050 2450 1650Rear dozer lowered g *8450 4500 6700 3150 4950 2300 4000 1850Rear stabilizer lowered kg *8450 5350 5900 3750 4350 2800 3550 2250F. stabilizer & r. dozer lowered kg *8450 6550 *7250 4600 5500 3450 *4300 2800

4.5 m 2 sets of stabilizers lowered kg *11 200 *11 200 *8950 7350 7400 5150 5500 3900 4300 3050 4200 2950 10.68 mRear dozer raised kg 8900 5900 5600 3800 3950 2700 3000 2000 2350 1500 2250 1450Rear dozer lowered g *11 200 6700 *8950 4300 6550 3050 4850 2250 3800 1750 3700 1700Rear stabilizer lowered kg *11 200 8100 8350 5150 5750 3650 4300 2700 3350 2100 3250 2050F. stabilizer & r. dozer lowered kg *11 200 10 100 *8950 6350 7350 4500 5450 3400 4250 2650 4150 2600

3.0 m 2 sets of stabilizers lowered kg *18 650 *18 650 *12 450 11 350 *9450 7050 7200 5000 5400 3800 4250 3000 4000 2850 10.94 mRear dozer raised kg 16 900 10 000 8300 5400 5350 3550 3800 2550 2900 1900 2300 1500 2150 1400Rear dozer lowered g *18 650 11 800 *12 450 6150 9250 4000 6350 2900 4750 2200 3750 1700 3500 1600Rear stabilizer lowered kg *18 650 15 050 *12 450 7500 8050 4850 5600 3500 4200 2650 3300 2100 3100 1950F. stabilizer & r. dozer lowered kg *18 650 *18 650 *12 450 9500 *9450 6050 7150 4350 5350 3300 4200 2600 3950 2450

1.5 m 2 sets of stabilizers lowered kg *13 100 10 650 *9650 6750 7050 4850 5300 3700 4200 2950 3950 2800 11.00 mRear dozer raised kg 7650 4850 5050 3250 3650 2400 2800 1850 2250 1450 2100 1350Rear dozer lowered g *13 100 5600 8900 3750 6200 2750 4650 2100 3700 1650 3450 1550Rear stabilizer lowered kg 12 700 6900 7700 4550 5400 3300 4100 2550 3300 2050 3050 1900F. stabilizer & r. dozer lowered kg *13 100 8850 *9650 5750 6950 4150 5250 3200 4150 2550 3900 2400

Ground 2 sets of stabilizers lowered kg *3500 *3500 *12 200 10 150 *9300 6500 6850 4700 5200 3650 *4100 2950Rear dozer raised kg *3500 *3500 7250 4450 4800 3050 3550 2250 2750 1750 2200 1400Rear dozer lowered g *3500 *3500 *12 200 5200 8600 3500 6050 2600 4600 2050 3650 1650Rear stabilizer lowered kg *3500 *3500 12 150 6500 7400 4300 5250 3200 4050 2500 3250 2000F. stabilizer & r. dozer lowered kg *3500 *3500 *12 200 8400 *9300 5500 6800 4050 5150 3150 *4100 2550

–1.5 m 2 sets of stabilizers lowered kg *9600 *9600 *8100 6350 *6300 4600 *4750 3600Rear dozer raised kg 7050 4250 4650 2900 3450 2200 2700 1700Rear dozer lowered

k

k

k

k

k

k

k

k

kg *9600 5000 *8100 3400 5950 2500 4550 2000Rear stabilizer lowered kg *9600 6300 7250 4200 5150 3100 4000 2450F. stabilizer & r. dozer lowered kg *9600 8200 *8100 5350 *6300 3950 *4750 3100


3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m

UNDERCARRIAGE – Standard BOOM – 6.2 m (20'4") STICK – 4.9 m (16'1") Drop Nose





27

Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.

Power TrainAir filterAltitude capability, 3000 m (9,842 ft)Automatic engine speed controlAutomatic starting aidCat C6.6 ACERT Technology

(U.S. Tier 3 and EU Stage IIIa compliant)Fuel filterFuel/water separator with level indicatorMufflerPower mode selector (economy and standard)High ambient cooling 52° C (125° F)

UndercarriageCreeper speedFour wheel driveFull hydraulic steering with emergency capabilityMH undercarriage with four welded outriggersOscillating front axle, lockable with remote greasing pointRight and left side anti-skid stepsTool box (left side)Two-piece drive shaftTwo speed transmission25 km/h (16 mph) Top Speed

HydraulicsCat XT-6 ES hosesHeavy lift modeOil cooler separate swing pumpStick regeneration circuitVariable displacement, load sensing hydraulic system

Other EquipmentAnti-drift valve for boom cylinderAutomatic swing brakeCapability to add auxiliary hydraulic circuitCaterpillar Datalink and Electronic Technician capabilityCaterpillar Product Link readyCounterweight 4000 kg (8,818 lb)S•O•SSM quick sampling valves for engine oil,

hydraulic oil and coolantUppercarriage access stepsLockable doors and and caps with Caterpillar one key

security system

Operator StationAdjustable armrestAsh tray with cigarette lighterBeverage holderSteps uppercarriageBolt-on FOGS capabilityBottle holderCoat hookParallel windshield wiper and washerFloor mat with storage tray, washableMonitor

Fuel gauge, engine coolant temperature and hydraulicoil temperature

Information and warning messagesFilter and fluid change intervalsWorking hour informationHeadlight and turning signal displayEngine dial settingClock with 10 day back-up

Hydraulic cab riser 2400 mm (94")Interior lightingJoysticks, pilot operatedLaminated front windshieldTiltable left side console with lock-out for all controlsLower right side literature holderLiterature pocket behind seatMirrorsMobile phone holderMounting provisions for radio and speakersParking brakePositive filtered ventilationPower supply, 12V-7APressurized cabRear window, emergency exitSeat belt, retractableSeat with adjustable suspensionSkylightSliding door windowsSteering column, tiltableRear storage compartmentSunshade for windshield and skylight

ElectricalAlternator, 75 ampLights

Boom working lightCab interiorRoading lights, front and rearFlashers, (caution)

Power disconnectSignal/warning hornHeavy duty maintenance free batteries (2)


28

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for details.

Sticks, MHDrop nose MH 4.9 m (16'1")Straight MH 4.2 m (13'9")

Sticks, ExcavationIndustrial 3.3 m (10'10")2.2 m (7'3")2.5 m (8'3")2.8 m (9'3")

HydraulicsBiodegradable hydraulic oil

UndercarriageMH undercarriage with four welded outriggers

and front mounted bladeStandard bolt-on/pin-on undercarriage

Front bolt-on outriggersRear pin-on dozer bladeRear pin-on outriggers

Toolbox right sideOptional tires

Dual 10.00-20 solid rubber Dual 11.00-20 Bridgestone FG 16 plyDual 11.00-20 Nokian Armor Guard 16 ply

Other EquipmentMedium pressure auxiliary hydraulic circuitHigh pressure auxiliary hydraulic circuit2nd High pressure auxiliary hydraulic circuitJoystick steeringMachine security systemCustom paint

Operator StationRearview cameraSeat

Comfort with air suspension and manualweight adjustment

Deluxe with vertical and horizontal air suspension,automatic weight adjustment, climate controlled seatcushion and backrest, headrest, premium micro-fibercloth, pneumatic lumbar support, seat cushion lengthand angle adjustment

Falling objects guardSeat HeadrestTravel speed lockVandalism guardRain visorWindshield

Fixed one piece70/30 removable

73 mm (3") static seatbeltHeated mirrorsAM/FM radio

ElectricalRear LED lightsRotating beacon

Booms, MHMH 6.2 m (20'4")

Booms, ExcavationOne piece excavation 5.3 m (17'7")VA excavation 5.4 m (17'10")


29

Notes

30

Notes

31

Notes

R

For more complete information on Cat products, dealer services,and industry solutions, visit us on the web at www.cat.com

© 2007 CaterpillarAll Rights Reserved

Printed in U.S.A.

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.

CAT, CATERPILLAR, ACERT, their respective logos, “Caterpillar Yellow” and thePOWER EDGE trade dress, as well as corporate and product identity used herein,

are trademarks of Caterpillar and may not be used without permission.AEHQ5875 (3-07)

M318D Material Handler

Documents

M318D Material · PDF fileEngine Model Cat® C6.6 ACERT ... M318D Material Handler ... controlled, hydraulic motor drives a variable speed on-demand fan for engine