M3-SE-ACDC Datasheet 5 - · PDF fileThe M3-SE-ACDC module’s primary function is to provide 200 W of DC power to the M3-SE stack from a AC power source. The M3-SE-ACDC also provides

The M3-SE-ACDC module’s primary function is to provide 200 W of DC power to the M3-SE stack from a AC power source. The M3-SE-ACDC also provides additional AC convenience outlets and USB DC charging ports for external devices.

M3-SE-ACDC

ANYMISSION

ANYTIMEANY

WHERE

+Additional Power Outlets+USB Charging Ports

Interfaces1 - AC Input (IEC 320 male)4 - AC Convenience Outlets (AC Voltage follows AC Input Voltage)2 - DC Charging USB Ports

07/2017

M3-SE-ACDC

www.cubic.com | 21580 Beaumeade Circle, Suite 230 | Ashburn, VA 20147 | [email protected] | www.dtechlabs.com

Includes Standard DTECH 2-Year Extended M3-SE Hardware Warranty

Physical SpecificationsSize: 1.65”/41.91 mm H x 10.25”/260.35 mm W x 5.06”/128.52 mm DWeight: 2.55 lbs/1.15kgMTBF: Exceeds 310,800 hoursOperating Temperature: -20˚ C to 65˚ C (Based on overall system operating range. For more information contact your sales representative.)Storage Temperature: -40˚ C to 85˚ C

Power SpecificationsPower Input: 85-264 VAC/50-440 HzPower Consumption: 8.2 W Minimum/8.9 W MaximumAC Convenience Outlets Output: 10 A Maximum (total load ALL outletsDC Power Output: 200 W Maximum NOTE: Maximum load supported includes any stacked equipment plus power needed to charge M3-SE-PA or M3-SE-PA2 batteries, if applicable.DC Voltage Output: 24 VDC (supports stacked M3-SE modules)DC USB Charging Output: 5 V @ 1A (5 W Maximum each port)

Included Accessories•AC Power Cable

COPYRIGHT © 2017 Due to product enhancements speci�cations may change. Contact your sales representative for current information.

The M3-SE-ACDC has a pass-through connector for modular stacking.

Documents

M3-SE-ACDC Datasheet 5 - · PDF fileThe M3-SE-ACDC module’s primary function is to provide 200 W of DC power to the M3-SE stack from a AC power source. The M3-SE-ACDC also provides