www.EBA-D.com

ENSIGN-BICKFORD AEROSPACE & DEFENSE COMPANY

www.EBA-D.com

DESCRIPTION:

TheM112DemolitionBlockisastapleof

militarydemolition.Itconsistsof1.25pounds

ofcompositionC-4,pressedintoarectangular

blockandpackagedinacompact,easyto

handle,easytotransport,shrink-wrapped,

plasticenvelope.

APPLICATION:

•Ordnancedisposal

•Metalcutting

•Militarydemolition

•Breaching

M112 Demolition Block PRODUCTTECHNICALDATASHEET

Cleared for Open Publication by the Office of Security Review, Department of Defense 08/30/2012 12-S-2806

PROPERTIES:

•VOD:26378ft/s(8,040m/s)(nominal)

•Density:0.058lb/in3(1.60g/cc)(minimum)

•Operatingtemperature:-40°Fto+165°F(-40°Cto74°C)

•Waterresistant

•Bullet-impactinsensitive

•Size:1.0in(2.54cm)Hx2in(5.08cm)Wx11in(27.9cm)L

ENSIGN-BICKFORD AEROSPACE & DEFENSE COMPANY640 HOPMEADOW STREET, P.O. BOX 429, SIMSBURY, CT 06070, USA www.EBA-D.com

Attention: The information and recommendations described in this brochure cannot possibly cover every application of the products or variation of conditions under which the products are used. The recommendations herein are based on the manufacturer’s experience, research and testing. They are believed to be accurate, but no warranties are made, express or implied. In addition, the specifications

contained herein are all nominal which represent our current production. The products described may be subject to change. Please feel free to contact Ensign-Bickford Aerospace & Defense Company for verification. No Warranties or Liabilities: THE PRODUCTS DESCRIBED HEREIN are sold “AS IS” and without any warranty or guaranty, express, or implied, arising by law or otherwise including without limitation any warranty of merchantability

or fitness for a particular purpose. Buyer and user agrees further to release and discharge seller from any and all liabilities whatsoever arising out of the purchase or use of any product described herein whether or not such liability is occasioned by seller’s negligence or based upon strict products liability or upon principles of indemnity or contribution. Content©2011 Ensign-Bickford Aerospace & Defense Company, Simsbury, CT 06070, U.S.A

ENSIGN-BICKFORD AEROSPACE & DEFENSE COMPANY640 HOPMEADOW STREET, P.O. BOX 429, SIMSBURY, CT 06070, USA www.EBA-D.com

Attention: The information and recommendations described in this brochure cannot possibly cover every application of the products or variation of conditions under which the products are used. The recommendations herein are based on the manufacturer’s experience, research and testing. They are believed to be accurate, but no warranties are made, express or implied. In addition, the specifications

contained herein are all nominal which represent our current production. The products described may be subject to change. Please feel free to contact Ensign-Bickford Aerospace & Defense Company for verification. No Warranties or Liabilities: THE PRODUCTS DESCRIBED HEREIN are sold “AS IS” and without any warranty or guaranty, express, or implied, arising by law or otherwise including without limitation any warranty of merchantability

or fitness for a particular purpose. Buyer and user agree further to release and discharge seller from any and all liabilities whatsoever arising out of the purchase or use of any product described herein whether or not such liability is occasioned by seller’s negligence or based upon strict products liability or upon principles of indemnity or contribution. Content©2012 Ensign-Bickford Aerospace & Defense Company, Simsbury, CT 06070, U.S.A.

SPECIFICATIONS:

M112 Demolition Block

Cleared for Open Publication by the Office of Security Review, Department of Defense 08/30/2012 12-S-2806

Charges, Demolition, UN00481.1D

M112 NATIONAL STOCk NUMbER

WEIGHT(NOMINAL)

lb kgPACkAGING

THICkNESS (NOMINAL)

in cm

WIDTH (NOMINAL)

in cm

LENGTH (NOMINAL)

in cm

1375-01-389-3854 1.25 0.57Olive-Drab Mylar-Film Bag

with Pressure-Sensitive Tape on One Surface

1.0 2.54 2.0 5.08 11.0 27.9

OPERATION:

TheM112DemolitionBlockcanbeusedforgeneraldemolition

individually,combinedwithotherM112blocksorbrokenupand

moldedintovirtuallyanyshapetoconformtoirregularsurfaces

orwhenlessexplosiveisdesired.

CONSTRUCTION:

TheM112DemolitionBlockconsistsof1.25poundsofComposition

C-4plasticexplosivepressedintoablockmeasuringapproximately

1.0in(2.54cm)Hx2in(5.08cm)Wx11in(27.9cm)L

andhaspressure-sensitiveadhesivetapeattachedto

onesurface.Eachblockispackagedinasealed,

shrink-wrapped,plastic,ODgreenenvelope.