M100 Shapes LED Recessed [L10/L1R] selux€¦ · After Drywall Flange Mounting (SF3) 1. Drywall/Drywall screw (Ref.) 2. Drywall/Drywall (Ref.) 3. 1/6” Plaster skimcoat (Ref.) 4

Page 1 of 11 (Rev. 08/2020)

M100Shapes_Rec_V1.3_1CIn a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Project:

Type: Qty:

Date: Customer:

M100 ShapesLED Recessed

* Custom colors are available, please consult factory

Order Code: - - - - - -

Emergency Options

Driver

EC Emergency Circuit Wiring (consult factory)

DE16,7 Lutron 1% EcoSystem

DC26,7,8 Lutron 1% 2-Wire

- -

DL Damp Location Rated

FS In-line Fuse

Fixture Options

DIM6 0-10V 1% (Linear)

- - -

EMR Remote Micro Inverter (consult factory)

DC5 Lutron 5% 5-Series (consult factory)

Series L10 Multi-Mount Form

Light Engine

CCT

Shielding LW LED Optimized White Lens

MI Clear Lensw/Microprism

Shape and Nominal Length

Finish WH White

SV Silver

SP Specify Premium Color

Voltage 1120 Volt

2277 Volt

L10R

L10R

U120 through 277 50/60hz capable

BL Semi-Matte Black

3347 Volt (consult factory)

1 Values calculated from a 4’ fixture at 90 CRI, 3500K using LW shielding and a DIM driver. For additional information, please see page 2.

2 Not available with Lutron

TX QXY HX Triangle Rectangle/ Hexagon

Square

4 1’ triangle, square and hexagon, along with 2’ triangle and square are supplied as one housing. All other sizes and shapes are supplied in multiple housings joined together in the field.

5 1’ triangle not available with RC mounting

*X = 1’, 2’, 3’, 4’ *Y = 1’, 2’, 3’, 4’

* Select shape and add nominal side length. For rectangles, indicate length and width. Example: Use T4 for a Triangle with sides 4’ long.

* For other lengths, shapes or configurations, please consult factory.

6 See page 7 for details7 Not available in 1’ side length8 120V only

LED WARRANTY

5YEAR

ARRA Compliant

L10 Mounting

or

L1R Mounting RC4,5 Rotating Crossbar (Ceilings 1/4” to 2” thick)

SF14 Spackle Flange(1/2” drywall)

SF24 Spackle Flange(5/8” drywall)

SF34 Spackle Flange(after drywall)

TS4 1” 1/4”-20 stud

L1R Continuous Flange

3 Consult factory for lead times930 3000K 90+ CRI

935 3500K90+ CRI

940 4000K 90+ CRI

927 2700K 90+ CRI

8303 3000K 80+ CRI

8273 2700K 80+ CRI

8353 3500K 80+ CRI

8403 4000K 80+ CRI

DL016,7 eldoLED 0.1% SOLOdrive 0-10V (Logarithmic)

DED6,7 eldoLED 1% ECOdrive DALI (Logarithmic)

D016,7 eldoLED 0.1% SOLOdrive 0-10V (Linear)

DIL6,7 eldoLED 1% ECOdrive 0-10V (Logarithmic)

RGBW 4000K (consult factory)

1C451,2,3 80CRI-1123lm 90CRI-944lm 11.1W per foot

1C401,2,3 80CRI-1014lm 90CRI-852lm 9.9W per foot

1C351 80CRI-957lm 90CRI-805lm 8.7W per foot

1C301,2 80CRI-765lm 90CRI-643lm 7.3W per foot



Page 2 of 11 (Rev. 08/2020)

M100Shapes_Rec_V1.3_1C

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2020 T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us


Construction:

Housing - Continuous, low copper 6063-T6 extrud-ed aluminum profile available as Triangle, Square, Rectangle, or Hexagon.

Flange (L1R Series) - 9/16” (14mm) wide flange runs full lengths of both sides and is part of the main extruded body.

Geartray - Low copper 6063-T6 extruded alumi-num profile.

Shielding - Extruded, impact resistant acrylic lens:- LED Optimized White Lens (LW)- Clear Lens with Microprism Inlay (MI)

Mounting(s) - Spackle in (drywall), Rotating Cross-bar, and Threaded Stud Mountings (see pages 3 through 6 for details).

Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. ** Individual luminaires are not joinable in the field.

Exact length luminaires - Sizes and shapes other than those indicated are available to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the corners for exact length luminaires.

L10 Joiner(s) - 1’ triange, square, and hexagon along with 2’ triangle and square supplied as one housing. All other sizes, shapes, and configurations are supplied in multiple housings joined together in the field using the supplied L10 joiner system. This allows ease of installation and ensures a uniform appearance (see page 9 for detail).

Weight - 1.8 lb per foot based on total length.

Electrical/Performance:

LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 95% at 25,000 hours and 90% at 60,000 hours at 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours.

Photometrics - Consult website or factory for IES Files. Independent photometric lumen measurement complies with IES LM-79-08 testing procedures. Due to the LED manufacturer’s tolerances, the listed output has a ±5% tolerance. For outputs based on different optics or CCT, please see pages 10-11 for details.

CRI - 90+ and 80+ CRI. Consult factory for lead times of 80 CRI.

All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC > 0.90. For more detailed information on the available drivers please see page 7.

Thermal Performance:

Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35°C (95°F) for all drivers.

Luminaires are suitable for minimum ambient temperatures of -40ºC (-40ºF) for DIM, DIL, DED, D01, and DL01 drivers. 0ºC (32ºF) for DC2 and DE1 drivers.

Luminaire Finish:

Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.

All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.

Standard interior colors are White (WH), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.

Warranty:

5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M36 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”

Certifications and Compliance: NRTL - For Dry and Damp location (I.E. cULus; cCSAus)ARRA CompliantRoHS Compliant

4” (101mm)

3 11/16” (94mm)

3 15/16” (100mm)

4” (101mm)

3 15/16” (100mm)

3 11/16” (94mm)

4 13/16” (122mm) LW lens shown for reference

L10 L1R

Page 3 of 11 (Rev. 08/2020)





1. 1/4”-20 Threaded rod to struture (supplied and installed by others).

2. 1/4”-20 Coupler hardware (supplied and installed by others).

3. 1” 1/4”-20 Stud (by Selux).4. Ø5/16” [Ø7mm] mounting hole. 5. Drywall/Drywall screw (Ref.)6. Drywall/Drywall (Ref.)7. 1/6” Plaster skimcoat (Ref.)8. Drywall/Drywall tape (Ref.) 9. Brackets installed and shipped in the closed position

by Selux. - Rotate bracket to open position so the geartray can be removed to make the housing and wiring connections.

- After connections are made, rotate bracket back to the closed position (see installation instructions for full details).

- Brackets to be removed only after the luminaire is completely secured to the drywall through the spackle flange.

9

1/2” Spackle Flange Mounting (SF1)

Fixture must be installed

before drywall

*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.*For rectangle length and width dimensions, reference the square nominal size rows needed.

Shape Hexagon Triangle Square

Nominal Leg Length

A Outside B inside C Mounting A Outside B Inside C Mounting A Outside B Inside C Mounting

Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

1 1' - 2 13/16'' 377 0' - 9 7/16'' 239 0' - 6'' 152 1' - 8 3/8'' 517 0' - 4 1/16'' 104 0' - 6'' 152 1' - 4 15/16'' 431 0' - 7 9/16'' 192 0' - 6'' 152

2 2' - 2 3/4'' 680 1' - 9 3/8'' 542 1' - 0'' 305 2' - 8 5/16'' 820 1' - 4'' 407 1' - 0'' 305 2' - 4 7/8'' 734 1' - 7 1/2'' 495 1' - 0'' 305

3 3' - 2 3/4'' 984 2' - 9 5/16'' 846 2' - 0'' 610 3' - 8 1/4'' 1124 2' - 3 15/16'' 710 2' - 0'' 610 3' - 4 13/16'' 1037 2' - 7 7/16'' 799 2' - 0'' 610

4 4' - 2 11/16'' 1287 3' - 9 1/4'' 1149 3' - 0'' 914 4' - 8 3/16'' 1427 3' - 3 7/8'' 1014 3' - 0'' 914 4' - 4 3/4'' 1341 3' - 7 3/8'' 1102 3' - 0'' 914

Spackle Flange Mounting (SF1 and SF2)

Standard Recessed (L10) housing sections and lens lengths:

For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. Listed below are the standard shapes in standard sizes. Shapes cannot be combined with linear lengths or other shapes if non-standard shapes and sizes are required.

Note: lens length does not always match housing length. For standard lengths up to 4’, lens will equal side length.

9

5/8” Spackle Flange Mounting (SF2)

Fixture must be installed

before drywall

Page 4 of 11 (Rev. 08/2020)





1

23 4

5

6

After Drywall Flange Mounting (SF3)1. Drywall/Drywall screw (Ref.)2. Drywall/Drywall (Ref.)3. 1/6” Plaster skimcoat (Ref.)4. Drywall/Drywall tape (Ref.) 5. Blocking to secure fixture (by others)6. Brackets installed and shipped in the closed position by Selux.

- Rotate bracket to open position so the geartray can be removed to make the housing and wiring connections.

- After connections are made, rotate bracket back to the closed posi-tion (see installation instructions for full details).

- Brackets to be removed only after the luminaire is completely secured to the drywall through the spackle flange.



Nominal Leg Length



1 1' - 4 1/8'' 410 0' - 8 1/8'' 206 1' - 9'' 534 2' - 3/16'' 615 0' - 3/16'' 5 1' - 3/16'' 310 1' - 7 3/16'' 488 0' - 5 5/16'' 135 1' - 1/4'' 311

2 2' - 4 1/16'' 713 1' - 8 1/16'' 510 3' - 5 11/16'' 1059 3' - 3/16'' 918 1' - 1/8'' 309 2' - 3/16'' 614 2' - 7 1/8'' 791 1' - 5 1/4'' 438 2' - 3/16'' 615

3 3' - 4'' 1016 2' - 8'' 813 5' - 2 3/8'' 1584 4' - 1/8'' 1222 2' - 1/8'' 612 3' - 1/8'' 917 3' - 7 1/16'' 1094 2' - 5 3/16'' 742 3' - 1/8'' 918

4 4' - 3 15/16'' 1320 3' - 7 15/16'' 1116 6' - 11 1/16'' 2109 5' - 1/16'' 1525 3' - 1/16'' 915 4' - 1/16'' 1220 4' - 7'' 1398 3' - 5/8'' 1045 4' - 1/16'' 1221

Spackle Flange Mounting (SF3)

Standard Recessed (L10) housing sections and lens lengths:



Page 5 of 11 (Rev. 08/2020)





1. Rotating Crossbar intended for inaccessible ceilings, adjustable for ceiling thickness of 1/4” to 2”.


Nominal Leg Length



1 1' - 2 7/8'' 378 0' - 9 3/8'' 238 0' - 6'' 152 N/A N/A N/A N/A N/A N/A 1' - 5 1/16'' 433 0' - 7 7/16'' 189 0' - 6'' 152

2 2' - 2 13/16'' 682 1' - 9 5/16'' 541 1' - 0'' 305 2' - 8 1/2'' 825 1' - 3 13/16'' 402 1' - 0'' 305 2' - 5'' 737 1' - 7 3/8'' 493 1' - 0'' 305

3 3' - 2 13/16'' 985 2' - 9 1/4'' 844 2' - 0'' 610 3' - 8 7/16'' 1128 2' - 3 3/4'' 706 2' - 0'' 610 3' - 4 15/16'' 1040 2' - 7 5/16'' 796 2' - 0'' 610

4 4' - 2 3/4'' 1288 3' - 9 3/16'' 1147 3' - 0'' 914 4' - 8 3/8'' 1431 3' - 3 3/4'' 1009 3' - 0'' 914 4' - 4 7/8'' 1343 3' - 7 1/4'' 1099 3' - 0'' 914

Rotating Crossbar Mounting (RC)

Standard Recessed (L10R) housing sections and lens lengths:


*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.*For rectangle length and width dimensions, reference the square nominal size rows needed.*Triangle with 1’ side length not available with rotating crossbar option.


Rotating Crossbars (RC) (1/4” to 2” thick ceiling)

8 3/8

123 4

Page 6 of 11 (Rev. 08/2020)





1. 1/4”-20 Threaded rod to structure (supplied and installed by others).2. 1/4”-20 Coupler hardware (supplied and installed by others).3. 1” 1/4-20 Stud (by Selux).4. Ø5/16” [Ø7mm] mounting hole.

Threaded Stud Mounting (TS)

Standard Recessed (L10R) housing sections and lens lengths:





Nominal Leg Length



1 1' - 2 7/8'' 378 0' - 9 3/8'' 238 0' - 6'' 152 N/A N/A N/A N/A N/A N/A 1' - 5 1/16'' 433 0' - 7 7/16'' 189 0' - 6'' 152

2 2' - 2 13/16'' 682 1' - 9 5/16'' 541 1' - 0'' 305 2' - 8 1/2'' 825 1' - 3 13/16'' 402 1' - 0'' 305 2' - 5'' 737 1' - 7 3/8'' 493 1' - 0'' 305

3 3' - 2 13/16'' 985 2' - 9 1/4'' 844 2' - 0'' 610 3' - 8 7/16'' 1128 2' - 3 3/4'' 706 2' - 0'' 610 3' - 4 15/16'' 1040 2' - 7 5/16'' 796 2' - 0'' 610

4 4' - 2 3/4'' 1288 3' - 9 3/16'' 1147 3' - 0'' 914 4' - 8 3/8'' 1431 3' - 3 3/4'' 1009 3' - 0'' 914 4' - 4 7/8'' 1343 3' - 7 1/4'' 1099 3' - 0'' 914

1/4”-20 Threaded Stud (TS) (1” Threaded Stud)

8 3/8

123 4

Page 7 of 11 (Rev. 08/2020)





Drivers:

Wiring Diagrams

0-10V linear dimming (DIM)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size constraints, 1’ side length luminaires are supplied with a driver from a different manufacturer than 2’ and above luminaires. For details, please consult factory).

0-10V logarithmic eldoLED ECOdrive (DIL)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for logarithmic dimming curve. Fixtures shipped wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%.

eldoLED ECOdrive DALI dimming (DED)Luminaires supplied with ECOdrive DALI dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.

eldoLED SOLOdrive 0-10V linear dimming (D01) Luminaires supplied with SOLOdrive 0-10V dimming driver with linear dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.

eldoLED SOLOdrive 0-10V logarithmic dimming (DL01) Luminaires supplied with SOLOdrive 0-10V dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.

LUTRON 2-wire dimming (DC2)Luminaires supplied with Hi-Lume 2-wire dimming driver (120V only)programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.

LUTRON EcoSystem dimming (DE1/DC5)Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 1% (DE1) with SoftOn/FadeToBlack or 5% (DC5).

* For control recommendations, please contact driver manufacturer.

* For driver counts, please see page 7.

- The following wire(s) are in addition to the standard above -

Gray = (-) DALI or 0-10V Dimming ControlPurple = (+) DALI or 0-10V Dimming Control

Violet = “E1” Digital Link Dimming ControlViolet/White = “E2” Digital Link Dimming ControlDE1, DC5

0-10V linear (DIM) 0-10V logarithmic eldoLED ECOdrive (DIL)DALI logarithmic eldoLED ECOdrive (DED)0-10V linear eldoLED SOLOdrive (D01)0-10V logarithmic eldoLED SOLOdrive (DL01)

DIM, DIL, DED D01, DL01

Lutron EcoSystem (DE1)Lutron 5-Series (DC5)

Page 8 of 11 (Rev. 08/2020)





Driver Counts for DIM, DIL, DED, D01, DL01 drivers

Driver TypeDIM, DIL, DED,

D01, DL01

Driver Current 1C20 1C25 1C30 1C35 1C40 1C45

Pattern Shape Pattern Size Total Length Driver Quantity

1’ 4’ 1* 1* 1* 1* 2* 2*

2’ 8’ 1 1 2 2 2 2

3’ 12’ 2 2 2 3 3 3

4’ 16’ 2 2 4 4 4 4

1’ 3’ 1* 1* 1* 1* 1* 1*

2’ 6’ 1 1 1 2 2 2

3’ 9’ 2 2 2 3 3 3

4’ 12’ 2 2 2 3 3 3

1’ 6’ 2* 2* 2* 2* 2* 2*

2’ 12’ 2 2 2 3 3 3

3’ 18’ 3 3 3 6 6 6

4’ 24’ 3 3 6 6 6 6

Driver Counts for DE1 driversDriver Type

DE1Driver Current 1C20 1C25 1C30 1C35 1C40 1C45


1’ 4’ NA NA NA NA NA NA

2’ 8’ 2 2 2 2 2 2

3’ 12’ 2 2 2 3 3 3

4’ 16’ 4 4 4 4 4 4


2’ 6’ 1 1 1 3 3 3

3’ 9’ 2 2 3 3 3 3

4’ 12’ 2 2 2 3 3 3


2’ 12’ 2 2 2 3 3 3

3’ 18’ 6 6 6 6 6 6

4’ 24’ 6 6 6 6 6 6

Driver Counts for DC2 drivers

Driver TypeDC2

Driver Current 1C20 1C25 1C30 1C35 1C40 1C45



2’ 8’ 2 2 2 2 2 4

3’ 12’ 2 3 3 3 3 4

4’ 16’ 2 4 4 4 4 6


2’ 6’ 2 2 2 2 2 2

3’ 9’ 3 3 3 3 3 3

4’ 12’ 2 3 3 3 3 4


2’ 12’ 2 3 3 3 3 4

3’ 18’ 3 6 6 6 6 6

4’ 24’ 4 6 6 6 6 8

* DIM drivers only

Page 9 of 11 (Rev. 08/2020)





Fuse (FS) - Luminaires supplied with an in-line fuse located on the hot wire for each feed. (Supplied with an 8A slow burn fuse).

Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings.

Housing Breaks and Lens Lengths

LENS

LENSLENS

For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. These standard shapes are standalone and cannot be combined with any other shapes or lengths. For non-standard sizes, shapes or configurations and patterns please consult factory.

90° Elbow on top of the housing (7/8" feed hole)

3/8" flexible metal conduit (6' long)

6" leads

Straight fitting

Flex Whip - Standard Joiner System - Standard for multi-piece housing

Fixture extrusion

Joiner extrusion

Recommended #2 Phillips drive

Fixture extrusion

Additional view

Page 10 of 11 (Rev. 08/2020)





Photometry

LW Optics / 35W LED / 3500K CCT

Catalog #: L10-1C35-935-LW-X-04-XX-UReport #: 11685024.03Delivered Lumens: 3218Input Watts: 35.3 Efficacy: 91lm/WCCT: 3500KCRI: 93

MI Optics / 35W LED / 3500K CCT

Catalog #: L10-1C35-935-MI-X-04-XX-UReport #: 11685024.07Delivered Lumens: 3356Input Watts: 35.3Efficacy: 95lm/WCCT: 3500KCRI: 93

Page 11 of 11 (Rev. 08/2020)





Photometry

CCT multipliers apply to the photometry, IES files, and per foot values listed on page 1 (light engine).

Light engine and lens multiplier supplied for per foot values listed on page 1 (light engine).

M100 Recessed

CCT Multiplier

4000K 1.05

3500K 1.00

3000K 0.96

2700K 0.92

CRI Multiplier

90+ CRI 1.00

80+ CRI 1.19

Lens Multiplier

LW 1.00

MI 1.04

M100 Lumen Table

Pattern Shape Leg Length

Total Length

Light Engine

1C45 1C40 1C35 1C30 1C25 1C20

1’ 4’ 3,420 3,208 2,804 2,508 2,000 1,660

2’ 8’ 6,840 6,416 5,608 5,016 4,000 3,320

3’ 12’ 10,260 9,624 8,412 7,524 6,000 4,980

4’ 16’ 13,680 12,832 11,216 10,032 8,000 6,640

1’ 3’ 2,565 2,406 2,103 1,881 1,500 1,245

2’ 6’ 5,130 4,812 4,206 3,762 3,000 2,490

3’ 9’ 7,695 7,218 6,309 5,643 4,500 3,735

4’ 12’ 10,260 9,624 8,412 7,524 6,000 4,980

1’ 6’ 5,130 4,812 4,206 3,762 3,000 2,490

2’ 12’ 10,260 9,624 8,412 7,524 6,000 4,980

3’ 18’ 15,390 14,436 12,618 11,286 9,000 7,470

4’ 24’ 20,520 19,248 16,824 15,048 12,000 9,960

1X2 6’ 5,130 4,812 4,206 3,762 3,000 2,490

1X3 8’ 6,840 6,416 5,608 5,016 4,000 3,320

1X4 10’ 8,550 8,020 7,010 6,270 5,000 4,150

2X3 10’ 8,550 8,020 7,010 6,270 5,000 4,150

2X4 12’ 10,260 9,624 8,412 7,524 6,000 4,980

3X4 14’ 11,970 11,228 9,814 8,778 7,000 5,810

*Values calculated from a 4’ fixture at 3500K, 90 CRI using LW shielding and a DIM driver.

Documents

M100 Shapes LED Recessed [L10/L1R] selux€¦ · After Drywall Flange Mounting (SF3) 1. Drywall/Drywall screw (Ref.) 2. Drywall/Drywall (Ref.) 3. 1/6” Plaster skimcoat (Ref.) 4