M100 LED Direct [L10] · PDF fileLED MR16 downlight. DM. 6,7. eldoLED SOLOdrive 0-10V (Linear) Driver. DML. 6,7. eldoLED SOLOdrive 0-10V (Logarithmic) DMD. 6,7. eldoLED DALI (Logarithmic)

Page 1 of 14(Rev. 04/2018)

M100LED Direct_v[1B]3.2 In a continuing eff ort to off er the best product possible, we reserve the right to change, without notice, specifi cations or materials that in our opinion will not alter the function of the product. Specifi cation sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Project:

Type: Qty:

Date: Customer:

M100LED Direct

Order Code: - - - - - - - - - - -

V9016

Lit Inverted90° Corner

IT9016

Lit “T” section IX9016

Lit “X” sectionIL9016

Lit Horizontal 90° Corner

Confi gurationOptions

NominalFixtureLength

01*1 ft.

022 ft.

044 ft.

033 ft.

055 ft.

066 ft.

088 ft.

077 ft.

XXRuns (over 12’) & Confi gurations, round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal)

Finish WHWhite

BKBlack

SVSilver

Voltage

099 ft.

1111 ft.

1010 ft.

1212 ft.

Custom colors are available, Please consult factory

SPSpecify Premium Color

120120 Volt

277277 Volt

UNV120 thru 27750/60hz capable

Light Engine

CCT 303000K

353500K

404000K

Shielding LWLED Optimizedwhite lens

Mounting F5

Surface MountCCable

SSwivel Stem

RSRigid Stem

W4

Wall Mount

272700K

4 Consult factory for lengths under 2’

5 Over 8’ supplied with 2 or more housings that are joined in the fi eld.

1 Values calculated from a 4’ fi xture @4000K using LW Shielding and DIM driver. For additional information please see page 2.

2 Available starting at 2’ and up.3 Not available with Lutron.

Individual fi xtures, Runs and Confi gurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 thru 6 for additional details.

16 See page 10 for full details and restrictions

MIClear Lens with Microprism

EmergencyOptions

EC15

Emergency Circuit Wiring

15 See page 8 for full details and restrictions

DL10

Damp Location Rated

FS10

In-line FuseSS10

SeparateSwitching

FixtureOptions

10 See page 8 for full details and restrictions11 Consult factory

xxxx11

LED MR16 downlight

DM6,7

eldoLED SOLOdrive 0-10V (Linear)

Driver DML6,7

eldoLED SOLOdrive 0-10V (Logarithmic)

DMD6,7

eldoLED DALI(Logarithmic)

DCE6,7

Lutron Eco-System

DC36,7

Lutron 3-WireDC26,7,8

Lutron 2-Wire

6 See page 7 for full details7 Not available for 1’ length or with

1B45 or 1B408 120V only

DIM6

0-10V(Linear)

*1’ fi xture only available with 1 B35 light engine

-

LED WARRANTY

5YEAR ARRA

CompliantADA

Compliant

9 For use with E and P sensors only

SR6,7,9

Philips Xitanium SR (DALI)

1B351

706lm/8.5Wper foot

1B301,2

603lm/7.1Wper foot

1B251,2

540lm/6.3Wper foot

1B201,2

408lm/4.7Wper foot

1B451,2,3

887lm/10.9Wper foot

1B401,2,3

802lm/9.7Wper foot

347347 Volt(consult factory)

DC5Lutron 5-Series (consult factory)

xSNnLight enabled(consult factory)

EMRRemote Micro Inverter (consult factory)

EMIntegral EM Battery Pack(consult factory)

BLSemi-Matte Black

NBLMO Symmetric

A2LMO Asymmetric 20° Wall Washer

BWLMO Batwing

A5LMO Asymmetric 5° Wall Grazer

Series L10 M100 LED Direct

1Must be a minimum of 2 ft.

L10

L10

SensorOptions

xE12, 13

Enlighted

Replace “x” with quantity

xP112, 13

Philips Daylight

xP212 13

Philips Occ/Vac

xP312, 13

Philips Occ/Vac/Daylight

xS112, 14

Sensor Switch Daylight

xS212, 14

Sensor Switch Occ/Vac

xS312, 14

Sensor Switch Occ/Vac/Daylight

12 Minimum length 2’. See page 9 for full details and restrictions13 For use with SR driver only14 For use with DIM driver only

Page 2 of 14 (Rev. 04/2018)

M100LED Direct_v[1B]3.2

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.


M100LED Direct

Construction:

Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12’) or Runs.

Geartray - Low copper 6063-T6 extruded alu-minum profile

Shielding -Extruded, impact resistant acrylic snap in lens:- LED optimized white lens (LW)- Clear lens with microprism (MI)“LMO” refers to the Selux proprietary LED optical system - Light modulation optics. These lenses are offered in M100 behind a Satine Lens for even illumination and comfortable lit appearance.- “LMO” symmetric lens (NB)- “LMO” Asymmetric 20° wall washer (A2) - “LMO” Asymmetric 5° wall grazer (A5)- “LMO” Batwing (BW)

Mounting(s) - 1/16” Aircraft Cable, Ø5/8” Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details).** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If sym-metrical suspensions are required please consult the factory.

Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Con-figurations are available in approximately 1/4” increments starting at the nominal 12’ fixture length. ** Individual luminaires are not joinable in the field.

Exact length luminaires - Individual lumi-naires, Runs, and Configuration are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires.

L10 Joiner(s) - Runs and Configurations are supplied in multiple housing that are joined together in the field using the supplied L10 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail).

Weight: 3.2 lb. per foot.

Electrical/Performance:

LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 25,000 hours and 93% at 60,000 hours @ 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours.

Delivered Lumens - Due to LED manufacturer’s tolerances the listed output has a ±5% toler-ance. For outputs based on different shielding or CCT please see photometry section at the end.

CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse.

CRI - Min. 90.

All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 7.

Sensors - Selux offers a variety of integral sensor options. For details and specifications, please refer to page 9.

Thermal Performance:

Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35° C (95° F) for all drivers.

Luminaires are suitable for minimum ambient temperatures of:-40ºC (-40ºF) for DIM, DM, DML, and DMD drivers.-20ºC (-4ºF) for SR drivers.0ºC (32ºF) for DC2, DC3, and DCE drivers.

Luminaire Finish:

Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.

All products undergo a five stage intensive pretreatment process where product is thor-oughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.

Standard interior colors are White (WH), Black (BK), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.

Warranty:

5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M100 series LED luminaire shall be free from defects in mate-rial and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”

Certifications and Compliance: NRTL - For Dry and Damp location (I.E. cULus)ADA CompliantARRA CompliantRoHS Compliant

4” (101mm)

3 11/16” (94mm)

LW lens shown for reference

3 15/16”” (100mm)

Page 3 of 14 (Rev. 04/2018)




M100LED Direct

Cable Mounting (C)

Outlet box for feed only (by others)

L10 Cable (C) Suspension Detail (Feed location(s) only)

L10 Cable (C) Suspension Detail (Non-Feed location(s) only)

Cross bar with 1/4-20 rod and ground screw

1/4” x 5” diameter canopy (white)

2x White cable stay

Cord strain relief bushing

Chrome gripper

1/4”- 20 Threaded Rod (supplied & installed in the field by others)

1. Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).

2x Outlet box screws (by others)

1/4-20 Slip ring coupler

Feed cord (white)

1/16” Aircraft cable

Luminaire

1/4-20 Slip ring coupler

1/16” Aircraft cable

Chrome gripper

Luminaire

1/4” x 2” diameter Canopy (white)

Cable Mounting (C) - Dimensions

Nominal Length

“A” Housing Length

* “B” (Ref.) End Suspensions

“C” Mid. Suspension

“D” Feed Location

Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0' - 8 1/8" 206 0' - 1 1/8" 29

02 (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1' - 8" 508 0' - 1 1/8" 29

03 (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2' - 6 1/8" 764 0' - 2 1/8" 54

04 (4 ft.) 3' - 11 7/16" 1205 0' - 3 1/8" 79 3' - 5 3/16" 1047 0' - 2 1/8" 54

05 (5 ft.) 4' - 11 7/16" 1510 0' - 3 1/8" 79 4' - 5 3/16" 1351 0' - 2 1/8" 54

06 (6 ft.) 5' - 11 7/16" 1815 0' - 3 1/8" 79 5' - 5 3/16" 1656 0' - 2 1/8" 54

07 (7 ft.) 6' - 11 7/16" 2119 0' - 3 1/8" 79 6' - 5 3/16" 1961 0' - 2 1/8" 54

08 (8 ft.) 7' - 11 7/16" 2424 0' - 3 1/8" 79 7' - 5 3/16" 2266 0' - 2 1/8" 54

09 (9 ft.) 8' - 11 7/16" 2729 0' - 3 1/8" 79 8' - 5 3/16" 2570 0' - 2 1/8" 54

10 (10 ft.) 9' - 11 7/16" 3034 0' - 3 1/8" 79 9' - 5 3/16" 2875 0' - 2 1/8" 54

11 (11 ft.) 10' - 11 7/16" 3339 0' - 3 1/8" 79 10' - 5 3/16" 3180 0' - 2 1/8" 54

12 (12 ft.) 11' - 11 7/16" 3643 0' - 3 1/8" 79 11' - 5 3/16" 3485 0' - 2 1/8" 54

*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.

Cable Mounting (C)

Page 4 of 14 (Rev. 04/2018)




M100LED Direct

Stem Mounting (S & RS)

Outlet box (supplied & installed by others)

L10 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux)

L10 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux)

3/8”IP Cross bar with ground screws

Hemispherical assembly

1 7/16” x 5” diameter canopy (white)

1. Ø 5/8” Swivel Stem provides 30° swivel and can be cut in field (48” max. from ceiling to luminaire).

2. Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire).

Pin

3/8” IP steel stem (white)

Dress nut

Square nut

Luminaire

Outlet box (supplied & installed by others)

3/8 IP nipple (supplied & installed by others)

Suspension hickey

Canopy securing screw

1/4” x 5” diameter canopy (white)

Swivel (S) & Rigid Stem (RS) Mountings - Dimensions

Nominal Length






01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0' - 8 1/8" 206 0' - 2 1/8" 54

02 (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1' - 8" 508 0' - 2 1/8" 54

03 (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2' - 6 1/8" 764 0' - 3 1/8" 79

04 (4 ft.) 3' - 11 7/16" 1205 0' - 3 1/8" 79 3' - 5 3/16" 1047 0' - 3 1/8" 79

05 (5 ft.) 4' - 11 7/16" 1510 0' - 3 1/8" 79 4' - 5 3/16" 1351 0' - 3 1/8" 79

06 (6 ft.) 5' - 11 7/16" 1815 0' - 3 1/8" 79 5' - 5 3/16" 1656 0' - 3 1/8" 79

07 (7 ft.) 6' - 11 7/16" 2119 0' - 3 1/8" 79 6' - 5 3/16" 1961 0' - 3 1/8" 79

08 (8 ft.) 7' - 11 7/16" 2424 0' - 3 1/8" 79 7' - 5 3/16" 2266 0' - 3 1/8" 79

09 (9 ft.) 8' - 11 7/16" 2729 0' - 3 1/8" 79 8' - 5 3/16" 2570 0' - 3 1/8" 79

10 (10 ft.) 9' - 11 7/16" 3034 0' - 3 1/8" 79 9' - 5 3/16" 2875 0' - 3 1/8" 79

11 (11 ft.) 10' - 11 7/16" 3339 0' - 3 1/8" 79 10' - 5 3/16" 3180 0' - 3 1/8" 79

12 (12 ft.) 11' - 11 7/16" 3643 0' - 3 1/8" 79 11' - 5 3/16" 3485 0' - 3 1/8" 79


Stem Mounting (S & RS)

LuminaireDress nut

Square nut

Square nut

Square nut

3/8” IP steel stem (white)

Page 5 of 14 (Rev. 04/2018)




M100LED Direct

Wall Mounting (W)

1. Aluminum wall bracket (by Selux)2. 4”x4” or 2”x4” J-Box at feed location (supplied and installed by

others).3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to

anchor the wall bracket. Mounting hardware supplied and installed to code by others.

Wall Mount (W) (Covers a 4x4 or 2x4 J-Box)

Wall (W) Mount - Dimensions

Nominal Length






01 (1 ft.) 1' - 5/16" 313 0' - 6 3/16" 157 NA 0' - 6 3/16" 157

02 (2 ft.) 2' - 1/4" 616 0' - 3 1/8" 79 1' - 6 1/16" 458 0' - 3 1/8" 79

03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 2' - 1/8" 612 0' - 6 1/8" 156

04 (4 ft.) 3' - 11 7/16" 1205 0' - 6 1/8" 156 2' - 11 3/16" 894 0' - 6 1/8" 156

05 (5 ft.) 4' - 11 7/16" 1510 0' - 6 1/8" 156 3' - 11 3/16" 1199 0' - 6 1/8" 156

06 (6 ft.) 5' - 11 7/16" 1815 0' - 6 1/8" 156 4' - 11 3/16" 1504 0' - 6 1/8" 156

07 (7 ft.) 6' - 11 7/16" 2119 0' - 6 1/8" 156 5' - 11 3/16" 1808 0' - 6 1/8" 156

08 (8 ft.) 7' - 11 7/16" 2424 0' - 6 1/8" 156 6' - 11 3/16" 2113 0' - 6 1/8" 156

09 (9 ft.) 8' - 11 7/16" 2729 0' - 6 1/8" 156 7' - 11 3/16" 2418 0' - 6 1/8" 156

10 (10 ft.) 9' - 11 7/16" 3034 0' - 6 1/8" 156 8' - 11 3/16" 2723 0' - 6 1/8" 156

11 (11 ft.) 10' - 11 7/16" 3339 0' - 6 1/8" 156 9' - 11 3/16" 3028 0' - 6 1/8" 156

12 (12 ft.) 11' - 11 7/16" 3643 0' - 6 1/8" 156 10' - 11 3/16" 3332 0' - 6 1/8" 156


4” (102mm)

1”

(25mm) 4 15/16”

(126mm)

4” (102mm)

Page 6 of 14 (Rev. 04/2018)




M100LED Direct

Surface Mounting (F) - 1’ to 8’

1. Ø 5/16” Mounting hole drilled at the factory (mounting hardware to code by others).

Surface Mounting (F) - Over 9’ to 12’

Surface Mount (F)

Surface Mount (F) - Dimensions

Nominal Length



* “B1” End Suspensions


“C1” Mid. Suspension

“C2” Mid. Suspension


Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

01 (1 ft.) 1' - 5/16" 313 0' - 1 5/8" 41 N/A 0' - 9 1/8" 231 N/A N/A 0' - 4 1/8" 105

02 (2 ft.) 2' - 1/4" 616 0' - 1 5/8" 41 N/A 1' - 9" 534 N/A N/A 0' - 4 1/8" 105

03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 N/A 2' - 1/8" 612 N/A N/A 0' - 2 1/8" 54

04 (4 ft.) 3' - 11 7/16" 1205 0' - 6 1/8" 156 N/A 2' - 11 3/16" 894 N/A N/A 0' - 2 1/8" 54

05 (5 ft.) 4' - 11 7/16" 1510 0' - 6 1/8" 156 N/A 3' - 11 3/16" 1199 N/A N/A 0' - 2 1/8" 54

06 (6 ft.) 5' - 11 7/16" 1815 0' - 6 1/8" 156 N/A 3' 914 1' - 11 3/16" 590 N/A 0' - 2 1/8" 54

07 (7 ft.) 6' - 11 7/16" 2119 0' - 6 1/8" 156 N/A 3' 914 2' - 11 3/16" 894 N/A 0' - 2 1/8" 54

08 (8 ft.) 7' - 11 7/16" 2424 0' - 6 1/8" 156 N/A 3' 914 3' - 11 3/16" 1199 N/A 0' - 2 1/8" 54

09 (9 ft.) 8' - 11 7/16" 2729 0' - 6 1/8" 156 0' - 6" 153 3' - 11 3/16" 1199 NA 3' 914 0' - 2 1/8" 54

10 (10 ft.) 9' - 11 7/16" 3034 0' - 6 1/8" 156 0' - 6" 153 3' 914 1' - 11 3/16" 590 3' 914 0' - 2 1/8" 54

11 (11 ft.) 10' - 11 7/16" 3338 0' - 6 1/8" 156 0' - 6" 153 3' 914 2' - 11 3/16" 894 3' 914 0' - 2 1/8" 54

12 (12 ft.) 11' - 11 7/16" 3643 0' - 6 1/8" 156 0' - 6" 153 3' 914 3' - 11 3/16" 1199 3' 914 0' - 2 1/8" 54


Page 7 of 14 (Rev. 04/2018)




M100LED Direct

Driver Quantity

1 ft. 2 ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 10 ft. 11 ft. 12 ft. RUN

DIM 1 1 1 1 2 2 2 2 3 3 3 3Approximately 2 drivers per 4 ft.

DM, DML & DMD drivers N/A 1 1 1 1 1 2 2 2 2 3 3Approximately 2 drivers per 4 ft.

DC2, DC3, & DCE drivers N/A 1 1 1 2 2 2 2 3 3 3 3 Consult Factory

Drivers:

0-10V linear dimming (DIM)Luminaires supplied with drivers offering the capability of either normal switched operation or 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size constraints, 1’ luminaires are supplied with a driver from a different manufacturer than 2’ and above luminaires. For details, please consult factory.)

eldoLED SOLOdrive 0-10V linear dimming (DM)Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dim-ming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.

eldoLED SOLOdrive 0-10V logarithmic dimming (DML)Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.

* For control recommendations for eldoLED drivers, please consult eldoLED.

LUTRON 2-wire dimming (DC2)Luminaires supplied with Hi-lume 2-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.

LUTRON 3-wire dimming (DC3)Luminaires supplied with Hi-lume 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.

LUTRON Ecosystem dimming (DCE)Luminaires supplied with Hi-lume EcoSystem (4 wire, digital link) dim-ming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.

* For control recommendations and system layout for Lutron drivers, please contact Lutron.

Philips Xitanium Sensor Ready DALI dimming (SR)Luminaires supplied with Xitanium SR dimming driver programmed for Constant Current Reduction (CCR). Minimum dim level down to 5%. For use with E and P sensors only.

* For SR driver count, please consult factory* For inrush and control current, please refer to driver manufacturers’ spec sheets.

Wiring Diagrams Sensor Wiring Diagrams

standard0-10V linear (DIM) 0-10V linear eldoLED SOLOdrive (DM)0-10V logarithmic eldoLED SOLOdrive (DML)DALI eldoLED SOLOdrive (DMD)Philips SR DALI (SR)

DIM, DM, DML, DMD & SR

DALIDALI

ENLIGHTEDOR PHILIPSSENSOR

ELDO 0-10V

SENSORSWITCH

PHILIPS XR

SR (+)SR (-)

(+)(-) 0-10V AUX (+)

AUX (-)

Page 8 of 14 (Rev. 04/2018)




M100LED Direct

Joiner System - standard for Runs and Configurations

Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse).

Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing.

*For Damp Location with sensors, please consult factory.

Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is in-tended to be wired to the same panel/breaker (not intended for Emer-gency use).

- To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order.

* If the project requires different separate switching than outlined above please consult the factory.

*For Separate Switching with sensors, please consult factory.

Emergency Circuit (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use.

- For 1’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit.

- For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101).

*If a different configuration is needed please consult the factory.

*For EC with sensors, please consult factory.

Page 9 of 14 (Rev. 04/2018)




M100LED Direct

Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above.

Lens Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise

Qty 1 Sensor - Beginning Qty 2 Sensor - Beginning and End (9’ fixtures and longer)

Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer

Beginning of Run

Notes: 1. For spacing between sensors, please consult the sensor manufacturer. 2. Exact sensor placement and coverage will be defined by approved factory drawing. 3. Sections controlled by sensors may not be symmetrical - consult factory for layout.

3” (76mm)

Enlighted FS-D22 (E)Occupancy/vacancy, daylight harvesting, plus the Internet of Things (IoT) data collection and reporting. For full details, please see FS-D22 spec sheet on the Enlighted website. Must be paired with Philips Xitanium SR driver (SR driver selection). Commissioning by Enlighted. *Please contact Enlighted for complete details prior to specifying. *Sensor can control up to 4 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.

Philips EasySense SNS102 (P)Occupancy/vacancy and daylight harvesting. Sensor can be programmed on-site via NFC or IR using Android app only, by others. For full details, please see the SNS102 spec sheet on the Philips website. Must be paired with Philips Xitanium SR driver (SR driver selection). Wall dimming via wireless wall switch from Philips/Illumra (www.illumra.com/easysense). **Please contact Philips for complete details prior to specifying. *Sensor can control up to 10 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.

Sensor Switch MSD EZ (S)Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with eldoLED 0-10V driver (DIM driver selection). Manual control of dimming not available with MSD EZ sensor. *Please contact Sensor Switch for complete details prior to specifying.*Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.

Occupancy Vacancy Daylight Harvesting Driver Compatibility

Enlighted FS-D22 (E) See Enlighted’s website for full capabilities SR

Philips EasySense SNS102 (P) √ √ √ SR

Sensor Switch MSD EZ (S) √ √ √ DIM

Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers’ spec sheets for details on presets and re-programming.

Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors.

Sensor Ordering Chart

Quantity Sensor Settings*

x Number of Sensors E Enlighted FS-D22

P Philips Easy Sense SNS102

S Sensor Switch MSD EZ

1 Daylight

2 Occupancy/Vacancy

3 Daylight/Occupancy/Vacancy

* Settings not available with Enlighted

* Lit section will be the fixture length minus 3” for sensor plate.

Fixture Length

Lit Section*

3 15/16”” (100mm)

Page 10 of 14 (Rev. 04/2018)




M100LED Direct

Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory.

The minimum standard lengths for “L” shapes:- IL90 or V90 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)- IL90 or V90 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90)( Exception is that the IL90 & V90’s can be joined directly to provide a 4’ x 4’ nominal shape)

*For sensors in configurations, please consult factory.

Standard Direct shapes/configurations:

The minimum standard lengths for “T” & “X” shapes:- IT90 = 4’ nominal on the short leg and 8’ nominal on the long side- IX90 = 8’ nominal for either direction

Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.

Project Specific Direct shapes/configurations:

Direct Lit Corner and Section - Dimensions

IL90 V90 IT90 IX90


“A” Housing (Outside) 2' - 2 1/16" 662

“A1” Housing (Inside) 1' - 10 1/8" 562

“B” Housing (Outside) 2' - 3 1/2" 698

“B1” Housing (Inside) 1' - 11 1/2" 597

“C” Housing 2' - 2 1/16" 662

* “C1” Ref. 2' - 1/8" 612

“D” Housing 4' - 3/16" 1224

* “D1” Ref. 2' - 1/8" 612

“E” Housing 4' - 3/16" 1224

* “E1” Ref. 2' - 1/8" 612


Page 11 of 14 (Rev. 04/2018)




Photometry

254

507

761

1014

1

2

Maximum Candela = 1014 Located At Horizontal Angle = 0, Vertical Angle = .5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

LW Optics / 34W LED / 4000K CCT

Catalog #: L10-1B35-40-LW-04-XX-UNVReport #: 11685024.03 Delievered Lumens: 2822 Input Watts: 34.0488WEfficacy: 83 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 4000KCRI: 95.7Max Candela: 1014 @ .5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38

M100LED Direct

490

980

1469

1959

12

Maximum Candela = 1959 Located At Horizontal Angle = 0, Vertical Angle = 1# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

MI Optics / 34W LED / 4000K CCT

Catalog #: L10-1B35-40-MI-X-04-XX-UNVReport #: 11685024.07 Delivered Lumens:2963 Input Watts: 34.0653WEfficacy: 87 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 3950KCRI: 95.7Max Candela: 1959 @ 1° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04

Page 12 of 14 (Rev. 04/2018)




Photometry

NB Optics / 34W LED / 4000K CCT

Catalog #: L10-1B35-40-NB-04-XX-UNVReport #: 12236853.04 Delievered Lumens: 2974 Input Watts: 33.28 WEfficacy: 89 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 4000KCRI: 95.7Max Candela: 1318.24 @ .5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38

M100LED Direct

330

659

989

1318

1

2

Maximum Candela = 1318.24 Located At Horizontal Angle = 90, Vertical Angle = .5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

A2 Optics / 34W LED / 4000K CCT

Catalog #: L10-1B35-40-A2-X-04-XX-UNVReport #: 12236853.0104 Delivered Lumens:2904 Input Watts: 33.18 WEfficacy: 88 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 3950KCRI: 95.7Max Candela: 1959 @ 1° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04

357

715

1072

1430

12

Maximum Candela = 1429.757 Located At Horizontal Angle = 0, Vertical Angle = 15.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

Page 13 of 14 (Rev. 04/2018)




Photometry

360

720

1080

1440

1

2

Maximum Candela = 1440.25 Located At Horizontal Angle = 0, Vertical Angle = 5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

A5 Optics / 34W LED / 4000K CCT

Catalog #: L10-1B35-40-A5-04-XX-UNVReport #: 12236853.020440 Delievered Lumens: 2974 Input Watts: 33.28 WEfficacy: 89 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 4000KCRI: 95.7Max Candela: 1440.25 @ .5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38

M100LED Direct

253

506

759

1012

1

2

Maximum Candela = 1012.29 Located At Horizontal Angle = 90, Vertical Angle = 16.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)

BW Optics / 34W LED / 4000K CCT

Catalog #: L10-1B35-40-BW-X-04-XX-UNVReport #: 12236853.030440 Delivered Lumens:2843 Input Watts: 33.22 W Efficacy: 86 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 3950KCRI: 95.7Max Candela: 1012.29 @ 1° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04

Page 14 of 14 (Rev. 04/2018)




Photometry

M100LED Direct

CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page one (light engine).

Light engine multiplier supplied for per foot values listed on page one (light engine).

4000K3500K3000K2700K

Light Engine Lumens Wattages1B45 1.258 1.2851B40 1.137 1.1401B35 1.000 1.0001B30 0.855 0.8381B25 0.766 0.7401B20 0.578 0.552

LWMINBA2A5BW

1.0611.0291.0541.008

Lens Multiplier1.0001.050

L100 LED Direct Photometry Multiplier Table

CCT Multiplier

Light Engine Multiplier

1.0000.9720.9630.931

Documents

M100 LED Direct [L10] · PDF fileLED MR16 downlight. DM. 6,7. eldoLED SOLOdrive 0-10V (Linear) Driver. DML. 6,7. eldoLED SOLOdrive 0-10V (Logarithmic) DMD. 6,7. eldoLED DALI (Logarithmic)