20
A revolutionary multi PDP Infinitely expandable multi PDP Thank you for your purchasing our Multi-PDP. Please read through this user's manual for safety before installing this product. This product is manufactured for Multi Plasma display model only. Multi-PDP User’s Manual Multi-PDP

M-PDP_manual_V2

Embed Size (px)

DESCRIPTION

Manual for video wall panels

Citation preview

Page 1: M-PDP_manual_V2

A revolutionary multi PDP

Infinitely expandable multi PDP

Thank you for your purchasing our Multi-PDP.Please read through this user's manual for safety before installing this product.This product is manufactured for Multi Plasma display model only.

Multi-PDP User’s ManualMulti-PDP

Page 2: M-PDP_manual_V2

1 2

Infinitely expandable Multi-PDP

If you fail to comply with the regulations for safelyand proper use, fire or injury may be caused.Warning

Features of Multi-PDP

You can enjoy a wide full-flat screen with high brightness and high quality.

It is installable and movable anywhere thanks to its thin shape.

You can enjoy your favorite programs with various screen-split featuressimultaneously presenting several programs.

Thank you for your purchasing our Multi-PDP monitor.

This manual describes how to use the product and notes in use.Please read the manual carefully before using it.After reading the manual, keep it with the certificate for you to refer to itwhenever you need.If you have any question or any problem occurs, please contact to theprovider or the A/S center immediately.

Pausing static picture for around 3 hours may cause an afterimage effect.

Notice of usersA-grade deviceIt is a device designed for business purpose with a safety certificate for electromagneticinterference, which user should be mindful of.

Contents

User’s Manual Multi-Screen ControlSystem(MSCS)

Power Cable

Guide Pin(4pcs)

RS232 CablePC Cable

1. How to keep safely 3~4

2. How to installHow to move Multi-PDP (short distance) 5How to move Multi-PDP (long distance) 5Stand type 6Wall type 7

3. Guidance for Users 8Input/Output Terminals 9Set ID Switch Setting 10

4. How to connect cables4.1. Connection of one set Multi-PDP

PC & DVI Connection 11VCR Connection 13DVD & DTV Connection 15

4.2. Connection of M x N Multi-PDP 17~184.3. Connection of 3 x 3 Multi-PDP 194.4. Setting ID of M x N Multi-PDP 20

5. Setting and operation of MSCS5.1. Set “Comport” for communication. 225.2 Set “Last Design /New Design” 225.3 Set ‘Multi-Screen’ Configuration 235.4 Configure diverse screens 245.5 Set several screens at a time 255.6 PDP ID Setting of MSCS Program 265.7 Use “PDP Control” 275.8 MSCS Size Control 285.9 Slide Control 295.10 Set “Timer On/Off” 315.11 Picture Control 325.12 Auto Tracking 335.13 Orion PDP Home Page logon and Version information 34

6. Other tips6.1 Before considering as a failure 356.2 About Plasma display panel 36

7. Resolution of PC & Video signal7.1 DVD/DTV 377.2 PC & DVI 37

8. Specifications 38

Page 3: M-PDP_manual_V2

3 4

Infinitely expandable Multi-PDP

1. HOW TO KEEP SAFELY

If it operates abnormally, stop using itimmediately.

Do not place any liquid-containingcontainer on it. If the inside is wet, itmay cause electric shock or fire.

Do not put any foreign material into theproduct. It may cause a failure orshorten the life span.

Please refer to a specializedconstruction company for installingstand or wall mount unit. Otherwise,damage or injury may be caused.

Do not touch the device when lightningstrikes. Otherwise, electric shock canbe caused.

Do not install it at unstable place.It may cause injury.

Avoid any action to damage the powercode or power plug. It may cause fireor electric shock.

Do not pull out the power plug with awet hand. It may cause electric shock.

Do not use exceeding ratings of outletor extension cords. It may causefailure.

Do not alter (or disassemble) theproduct. It may cause electric shocksince high voltage is flowing inside.

Do not install the product at any placeexposed to direct ray of light or nearany heating device. It may shortenproduct’s life span or cause failure.

Make sure the product is not covered withany object. If the venting hole is blocked,the inside temperature may rise to causeoverheating resulting in fire.

Do not pull out or hang down theconnection cable. It may damage thecord to cause fire or electric shock.

Do not lean against the product or keepit leaned. It may cause injury or failure.

Do not put it at any place with muchhumidity, dust, oil, smoke or steam. Itmay cause failure.

Pull out the power plug by holding theplug. Otherwise, it may damage thepower cord to cause fire or electricshock.

If you do not want to use the product fora long time, keep the power plugunplugged to save the electricity.The socket-outlet shall be installed nearthe equipment and shall be easilyaccessible.

Do not put any heavy object on it.It may cause failure.

Do not ride or step on the product It maycause breakage when fallen down.

When moving it, disconnect theconnecting cable. Otherwise, it maydamage the cable to cause fire orelectric shock.

Install the product on safe and flatsurface.

Do not put candles on the product. If theliquid flows inside the product. It maycause electric shock or fire.

Do not touch product’s front surfacewith hand. Otherwise, the image qualitycan be lowered.

Page 4: M-PDP_manual_V2

5 6

Infinitely expandable Multi-PDP

2. HOW TO INSTALL

How to move Multi-PDP (short distance)

• The set is installable in diverse ways such as on a wall, or stand etc.• Install this set only at a location where adequate ventilation is available.• This set is designed to be mounted either horizontally or vertically.

1. 2 people hold each handle on product’sback side

2 people transfer the product with holding thehandle and the front part at the same time.

How to move Multi-PDP (long distance)

Attach the transfer gripe to each side of theproduct.

Transfer gripe

Handles

2 people move the product with holding thegripe at the same time.

Install on a StandPedestal mount allowing minimum clearance for adequate ventilation.

STAND TYPE (OPTIONAL)• The set can be installed as shown below. (For further information, refer to the optional 'Stand

Installation and Setup Guide'.)

Hanger Bolt

PDP

Stand Stand

Attention

Do not incline the panel forward.

PANEL PANELPANEL

Guide Pin

Page 5: M-PDP_manual_V2

7 8

Infinitely expandable Multi-PDP

WALL TYPE (OPTIONAL)• The set can be installed on the wall as shown below.(For further information, refer to the optional ‘Wall Mounting Bracket Installation and Setup Guide'.)

Mount on the wallWall mount allowing minimum clearance for adequate ventilation.

3. Guidance for Users

Front view

Back view

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

Hanger Bolt

PDP

HangerHanger

Guide Pin

Page 6: M-PDP_manual_V2

9 10

Infinitely expandable Multi-PDP

Input/Output Terminals Set ID Switch Setting

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

1. RS-232CMulti-PDP Control, Firmware Upgrade, 9pin D-sub

2.VideoComposite SignalNTSC, PAL, SECAM

3.S-VideoS-Video SignalNTSC, PAL, SECAM, 4pin Mini Din

4.ComponentDVD SignalDTV - YPbPr Signal

5. PCComputer RGB Analog Signal, D-sub 15pin

6. DVI-DTMDS Signal

7. ID SwitchSet ID Switch

8. AC Input

Pr

Pb

Y

• Example of switch- This is Dyadic System. In case of PDP set ID 1 and ID 9, set the ID switch as shown in the

below figure

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

[PDP ID 1] [PDP ID 9]

ON ON

Page 7: M-PDP_manual_V2

11 12

Infinitely expandable Multi-PDP

4. How to Connect Cables

4.1. Connection of one set multi-PDP

PC & DVI Connection• MSCS (Multi-Screen Control System) that we supply and RS-232C of PDP monitor can

control all functions of Multi-PDP, such as On/Off and screen control.• To control Multi-PDP through PC, the Identity number of each Multi-PDP and that of

MSCS should be identical.• RS-232C of each Multi-PDP and PC should be connected.

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

PC (MSCS) to control Multi-PDP

PC

RS-232C COM1

When connecting to DVI

When connecting to PC-ANALOG

1 2 3 4 5 6 7 8

Page 8: M-PDP_manual_V2

13 14

Infinitely expandable Multi-PDP

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

VCR Connection

PC(MSCS) to control Multi-PDP

VCR

RS-232C COM1

When connecting to S-Video

When connecting to Video

1 2 3 4 5 6 7 8

Page 9: M-PDP_manual_V2

15 16

Infinitely expandable Multi-PDP

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVD & DTV Connection

PC(MSCS) to control Multi-PDP

DVD & DTV

RS-232C COM1

When connecting to Component

•Component Input portsYou can get better image quality byconnecting DVD player to component inputports as below.

Component ports ofthe set Y Pb Pr

Video output portsof DVD player

Y Pb PrY B-Y R-YY Cb Cr

1 2 3 4 5 6 7 8

Page 10: M-PDP_manual_V2

17 18

Infinitely expandable Multi-PDP

4.2. Connection of M x N Multi-PDP

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

Pr

Pb

Y

1 2 3 4 5 6 7 8

Pr

Pb

Y

1 2 3 4 5 6 7 8

Pr

Pb

Y

1 2 3 4 5 6 7 8

Pr

Pb

Y

1 2 3 4 5 6 7 8

RS-232C COM1

S-VIDEO

PDP1 PDP2 PDP3 PDP4 PDP5 PDP6 PDP7 PDP8

PC (MSCS) to control Multi-PDP

PC

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

• When connecting a number of Multi-PDP through Daisy Chain(Link), surrounding noise maycome out to lower the image quality.

• In case of lower image quality, it is advisable to use a distributor that can provide resolution overUXGA (1600*1200 @ 60Hz).

Page 11: M-PDP_manual_V2

19 20

Infinitely expandable Multi-PDP

4.4. Setting ID of M x N Multi-PDP

• Identity number (ID) indicates the location of each Multi-PDP.• When you look at the Multi-PDP screens in front of Multi-PDP.

PDP ID1

PDP ID2

PDP ID3

PDP ID4

PDP ID5

PDP ID6

PDP ID7

PDP ID8

PDP ID9

PDP ID10

PDP ID11

PDP ID12

PDP ID13

PDP ID14

PDP ID15

PDP ID16

PDP ID17

PDP ID18

PDP ID19

PDP ID20

PDP ID21

PDP ID22

PDP ID23

PDP ID24

PDP ID25

Recommended ID of M x N screens

ID 1 ID 2 ID 3 ID 4 ID 5

ID 6 ID 7 ID 8 ID 9 ID 10

ID 11 ID 12 ID 13 ID 14 ID 15

ID 16 ID 17 ID 18 ID 19 ID 20

ID 21 ID 22 ID 23 ID 24 ID 25

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

4.3. Connection of 3 x 3 Multi-PDP

PC

IN OUT

RS-232C INRS-232C OUT

ID 1

PC

IN OUT

RS-232C INRS-232C OUT

ID 4

PC

IN OUT

RS-232C INRS-232C OUT

ID 7

PC

IN OUT

RS-232C INRS-232C OUT

ID 2

PC

IN OUT

RS-232C INRS-232C OUT

ID 5

PC

IN OUT

RS-232C INRS-232C OUT

ID 8

PC

IN OUT

RS-232C INRS-232C OUT

ID 3

PC

IN OUT

RS-232C INRS-232C OUT

ID 6

PC

IN OUT

RS-232C INRS-232C OUT

ID 9

RS-232C control PC PC

PC Signal Distributor(UXGA : over 250MHz)

Page 12: M-PDP_manual_V2

21 22

Infinitely expandable Multi-PDP

5.2 Set “Last Design /New Design”

5.1. Set “Comport” for communication.• In order to control MPDP by using MSCS, communication connection between

MSCS and MPDP through comport must be secured first.

• MSCS Menu bar->Communication->Select one of the 6 comport. Then, either click “Connect”by using mouse or press Ctrl+C in keyboard for communication between PC and MPDP.

• In order to decontrol communication, either click MSCS Menu bar ->Communication->Disconnect or press Ctrl+D in keyboard.

Main Image of MSCS (Multi Screen Control system)

Communication Setting

5. Setting and operation of MSCS• MSCS is an application program created to control MPDP.• If running MSCS setup file, a directory is generated in C:\MSCS(v2.0) and MSCS (V2.0) icon

is created on the desktop.• Run MSCS (v2.0).exe file.

The initial phase of program execution is as indicated in the figure below.

• When comport connection is successfully completed, window for LastDesign/New Design setting is displayed.

• Last Design returns MSCS program to the status immediately before closing.• New Design makes preparation for users to newly configure MSCS program.• Click 'Enter' in keyboard to use Open Last Design configuration or 'Shift' to use Open New

Design configuration.

Last/New Design Set

Page 13: M-PDP_manual_V2

2423

Infinitely expandable Multi-PDP

Select a desirable Input Source in “Select Input”Ex) Select “DVI” in “Select Input”

Click a desirable screen in ‘Screen Configuration’.-Left-click a screen which should be converted to DVI.-The screen you selected will be changed into DVI.

You can configure other screens in the same way.-Selected screen will be displayed in DVD.

1

2

3

5.4 Configure diverse screens• You can configure diverse screens as you want.

5.3 Set ‘Multi-Screen’ Configuration

Select a desirable X number and Y number-X number represents the number of MPDP columns and Y number represents thenumber of MPDP rows.

Select one of the 6 input sources, such as DVI, PC, DTV, S-VIDEOand VIDEO from Select Input.

Press the “play” button-The overall screen is played on the selected external Sources unit if pressing the“play” button

Screen Configuration Setting

1

2

3

Page 14: M-PDP_manual_V2

25 26

Infinitely expandable Multi-PDP

5.6 PDP ID Setting of MSCS Program• PDP ID of MSCS (Multi Screen Control System) program is automatically setting.

• In order to transmit data to MPDP, PDP ID of Screen Configuration must be selected.• PDP ID can be selected by using right mouse button. The selected PDP ID is displayed in a red

square box.

Select a desirable Input Source in “Select input”.-Select a desirable ‘DVI’ in “Select Input”

Click a desirable screen in “Screen Configuration”-Left-click and drag on a start screen

The screen is divided for display.-The selected screen will be displayed in DVI.

1

2

3

5.5 Set several screens at a time• You can configure diverse screens as you want.

• Click MSCS Main Image's 'Play' button or scroll the middle button of mouse to return toseparate screen.

ID 1 ID 2 ID 3

ID 4 ID 5 ID 6

ID 7 ID 8 ID 9

Example of PDP ID Setting(Input signal is DVI, Configuration is 3 by 3)

Page 15: M-PDP_manual_V2

2827

Infinitely expandable Multi-PDP

- After Select MPDP, click Test Pattern - Red, Green, Blue, White or use Ctrl+1, Ctrl+2, Ctrl+3,Ctrl+4 in keyboard to control Test Pattern screen of MPDP.In order to return to screen from test pattern, select screen or use Ctrl+5 command onscreen of in keyboard.

- After Select MPDP, use VGA/WVGA Mode, XGA/WXGA Mode.

5.7 Use “PDP Control”• Transmit PDP Control Data to selected ID of MPDP.

• Remote Control-If checking “ALL PDP” box, the Data will be sent to all connected MPDP, disregarding PDP ID.

-In order to control Power of each MPDP, Use Power On/Off button after select each MPDP.

5.8 MSCS Size Control• The dialog size of MSCS can be set in three levels of small, medium and large as indicated

below.

PDP Control - Power On/Off

Test Pattern, VGA/WVGA Mode, XGA/WXGA Mode

Page 16: M-PDP_manual_V2

29 30

Infinitely expandable Multi-PDP

-When pressing the Start button, the saved screen arrangement is automaticallydisplayed for preset time.

When checking the Repeat Slide box, the display is repeated unlesspressing the Stop button.

Press the Stop button to discontinue the Slide.

4

5

6

5.9 Slide Control

• Set the slide show list as you want. It can be repeated.

Select a desirable screen arrangement in Screen Configurations.-Select a desirable screen arrangement and input source.

Input playing time in Slide Control.-Input display time and save the data by pressing the Add button.-The range of display time is 1 sec. ~ 1 hr.

Save diverse screen arrangements in the same way.-Set diverse types of display screen.

1

2

3

To view the slide from, Click ‘List Box’ of saved slide.To transmit saved slide protocol command, Double click ‘List Box’ of saved slide.

Page 17: M-PDP_manual_V2

31 32

Infinitely expandable Multi-PDP

5.10 Set “Timer On/Off”• MPDP can be turned on or off at the designated time by user.

• In order to run timer dialog window, click Menu bar->control->timer or use “Ctrl+T”, in keyboard

• On Time or Off Time is used as of the following.Set On Time items of hour and minute.Select once for once run of On Time and Select daily for daily run of On Time. Then, clickRun button.

• Off Time can be set in the same method as On Time.

• Both On Timer and Off Timer can run even when Timer Dialog window is closed.

• On Timer and Off Timer cannot be set at a same time.

5.11 Picture Control

• Register values related to display of MPDP can be changed.

• In order to run Picture Control Dialog window, click MSCS Menu Bar ->Control->PictureControl or use “Ctrl+W” in keyboard.

• In order to control display values, Input values directly to be changed in Edit Box andstroke Enter key is keyboard, or click -/+ button using mouse.

• Check All PDP button to transmit command data to all connected MPDPs, disregardingPDP ID.

• Picture Control Reset button initializes each value of all Picture Control.

• Exit button or Ctrl+X of keyboard is a command to exit Picture Control Dialog.

Timer Picture Control

Page 18: M-PDP_manual_V2

34

Infinitely expandable Multi-PDP

33

5.12 Auto Tracking

• Alignment can be adjusted when Input Source is PC.

• Tracking Auto is run by clicking MSCS Menu Bar ->Control->Auto or using Ctrl+A inkeyboard.

• If MPDP is not aligned with Tracking Auto command, users candisplay Tracking Manual Dialog, which enables fine tune ofalignment, with Menu->Control->Tracking->Manual or Ctrl+M inkeyboard.

• Tracking Manual dialog enables to set frequency, phase, linestart and pixel start.

• When Tracking Manual Dialog is on display, Picture ControlDialog cannot be displayed.

• Even when Tracking Manual Dialog is on display, the function ofMPDP ID setting by right-clicking the mouse can be used.(Refer to “5-6 PDP ID Setting”.)

• After operating Auto Tracking Set command, If alignment doesnot fit, give Auto Tracking Detail command to control Frequency,Phase, Line Start Pixel Start in detail to the each MPDP.

• Adjusting steps in detail are as follows.

1)Adjust “Phase” until you can have clear vertical lines.

2)After adjusting “Phase”, adjust “ Linestart” to fit vertical alignment. “Pixelstart” forhorizontal alignment.

3)Adjust “Frequency”, if you still have wrong alignment.If you adjust “Frequency”, repeat step 1) and 2) to fit alignment.- The range where you can adjust is form-50 to 50.

• Check All PDP button to transmit tracking command data to all connected MPDPs,disregarding of PDP ID.

• EXIT button or Ctrl+x of keyboard is the command to escape from Tracking Manual dialog.

Tracking Manual Dialog

5.13 Orion PDP Home Page logon and Version information

• Log on Home Page through MSCS Menu Bar->Help-> Orion PDP Home Page.

• Check MSCS & MPDP Firmware Version through MSCS Menu Bar->Help->About.

Orion PDP Home Page Logon

Checking MSCS & MPDP Firmware Version

Page 19: M-PDP_manual_V2

35 36

Infinitely expandable Multi-PDP

6.2 About Plasma display panelThe followings are phenomena caused by characteristics of the plasma display panel.Since it is not any failure, you may use it at rest.

Black or twinkling spots on the screenAlthough the plasma display panel is manufactured with high-precisiontechnology, there may exist black or twinkling spots on the screen.Since it is not any failure, you may use it at rest.

AfterimageWhen you keep static image still for around 3 hours, an afterimagemay occur. In this case, the afterimage can be slowly removed whenoperating the screen with full white test pattern.(refer to page 28)

Noise from the insideWhen you turn on the product, driving sound may be heard from thedisplay panel. Since it is not any failure, you may use it at rest.

6.1 Before considering as a failureBefore calling for any repair, check the following and then refer to a near A/S center.

6. Other tips

“Tick” sound from the main body.If there is no problem with the screen or sound, the “tick” sound is likelyto result from the cabinet lightly shrinking with the change of roomtemperature. The sound does not affect product’s performance.

No image at upper and bottom part of the screen.As for a screen which is over 16:9 in width (such as cinema-sized one),no image may be displayed at upper and bottom part of the screen.

Speckles or white lines on the screenCheck whether the problem is caused by vehicle, streetcar, high-voltage cable or neon sign, which emitting interference wave orelectromagnetic induction. Avoid any interfering object.

Screen size can be changed.The screen size may be fitted to the first dark scene depending oncontents.

Page 20: M-PDP_manual_V2

37 38

Infinitely expandable Multi-PDP

8. Specifications

Power supply 100 ~ 240V AC. 50/60HzPower consumption

Max 400WPlasma display panel 42inch, 16:9 aspect ratio

Contrast ratio 3,000 :1 (Dark room)Brightness 1,000 cd/m2 (w/o Film)

Front filter Low reflection coating filmNumber of pixels 853W X 480H PixelsSeam gap (In case of multi formation) 5mmEnvironmental condition

Temperature 0°C~ 35°CHumidity 20% ~ 70%

SignalVideo signal NTSC, PAL, SECAM,PC signal VGA, SVG A, XGA, SXGA, UXGAFrequency Horizontal Frequency 15.5 ~75kHz

Vertical Frequency 50~ 75HzConnectors Input Output

Video CVBS : BNCS-Video : DIN 4pin

Component Y, Pb, Pr : BNC Same as left sidePC PC RGB : D-Sub 15pinDVI TMDS : DVI-D 24pinSerial RS-232C D-sub 9pin(female) RS-232C D-sub 9pin (male)

Option Stand, Wall Mounting Bracket , Signal CableExternal dimension 926.2mm[W] X 523.6mm[H] X76.5mm[D]

Weight 27 kg

DVI-D OUT

RS-232C INRS-232C OUT

DVI-D IN

VIDEO

IN OUT

S-VIDEO

IN OUT

PC

IN OUT

COMPONENT

IN OUT

AC

INP

UT

926.2 76.5 528.9

523.6 336.0

93.8

93.8

7. Resolution of PC video signal

Resolution Aspect Ratio

480i 720 x 480 16:9

480p 720 x 480 16:9

576i 720 x 576 16:9

720p 1280 x 720 16:9

1080i 1920 x 1080 16:9

Resolution V-Freq. (Hz) H-Freq. (KHz) Remarks

640x350 85 37.86

640 x 480

60 31.47

72 37.86

75 37.50

85 43.27

800 x 600

56 35.16

60 37.88

72 48.08

75 46.88

85 53.67

1024 x 768

60 48.36

70 56.48

75 60.03

85 68.68

1152 x 864 75 67.50

1280 x 960 60 60.00

1280 x 1024 60 63.98

1600 x 1200 60 75.00

7.1 DVD/DTV

7.2 PC & DVI