M ost tubing comes in many colors, and we recommend that

ost tubing comes in many colors, and we recommend that

you start out with a plan to use color in our projects in a

consistent and common sense way.

It is easy to see how helpful it is to have a circuit piped up with color

tubing when all the red tubing is used in the active supply lines, blue in

pilots, etc. Everyone has their own preferences in colors, so we don’t

try to push one color code system over another, but we recommend

you have a system, and always use it.

Nylon

UrethaneAvailablein rolls orspools

Polyurethane

Braided Hose

M

Polyethylene

Vinyl

Copper

1/8” to 3/8” OD

1/16” to1/4” ID

11 different colorsavailable

513.521.4261 • www.clippard.com

Quality remains a primary

feature of every product

Clippard produces. This is

achieved through the

excellence in manufacturing

practices and craftsmanship

that has continued

throughout the years. The

high standards set by Leonard Clippard, in company

relationships with customers, distributors, suppliers

and employees continue to be upheld.

The company motto, "Quality

People, Quality Products",

emphasizes the important

role every employee plays in

maintaining the company's

reputation.

Clippard Minimatic®

miniature products

have evolved into a

widely used system of

fluid power control

devices, known for

quality, value and

performance.

Over the past five decades, a diverse range of industries

throughout the world have come to rely on Minimatics

to control machines, systems and processes through an

unlimited list of applications. Clippard’s quality in

design, engineering, and manufacturing, as well as

expansive produce offering, make Clippard the

preferred choice for miniature and sub-miniature

pneumatic applications.

Our diverse range of

valves is supported by

an experienced team of

engineers and

application specialists

devoted to finding a

solution to all your

engineering challenges.

Quality in Manufacturing

Full-Line Catalog

Clippard offers a complete full-

line, 400 page catalog which

displays product photos,

technical specifications and

drawings, design tips and

more. Request your free

copy today.

Web Site

Clippard's complete

line of Minimatic®

Control Devices

includes over 5,000

standard products.

Some of the many

products offered

include valves,

cylinders, fittings,

modular components,

push buttons, stainless steel cylinders, electronic

manifold cards, circuit analyzers and pre-piped

manifold subplates. Visit www.clippard.com to find

complete product information and specifications,

engineering drawings, ordering information, literature

downloads, product configurators, useful calculators,

technical assistance, distributor Information and

more.

513.521.4261 • www.clippard.com

513.521.4261 • www.clippard.com/tubing/

hose \ `hoz \ n : a flexible tube for conveying

gases or fluids

tubing \ `t(y)u-bing \ n : a stiff material in the

form of a tube used for conveying gases or fluids

Do you use a garden tube?

The answer to the question of whether to callit a tube or a hose rests on a fine line, onemany people have gotten tangled up in. Inboth definitions it clearly states that a tubeand a hose are used for conveying fluids, yetsometimes one word seems to fit the situation(and the application) better than the other. So remember...

It’s a hose when it’s flexible

and a tube when it’s not.

Clippard offers a variety of miniature hoseand tubing from copper and nylon tubing toflexible urethane, vinyl and Buna-N hose. Thechart below lists these products and theiravailable colors and lengths.

q - q - q - q

Available Lengths050 - 50 foot roll500 - 500 foot spool

Hose or Tubing Type

NYT1 - Single Nylon Tubing

VYH1 - Single Vinyl Hose

VYH2 - Dual Vinyl Hose

URH1 - Single 85 Duro. Urethane Hose

URH2 - Dual 85 Duro. Urethane Hose

URH8 - Ribbon 85 Duro. Urethane Hose

URT1 - Single 95 Duro. Urethane Tubing

PET1 - Single Polyethylene Tubing

Size: OD x ID

0402 - 1/8” x 1/16”

0403 - 1/8” x 3/32”

0503 - 5/32” x 3/32”

0804 - 1/4” x 1/8”

0805 - 1/4” x 0.160”

1208 - 3/8” x 1/4”

Metric Sizes

0604M - 6 mm x 4 mm

Colors: Solid TranslucentBLS - Blue BLT - BlueBKS - Black CLT - ClearBRS - Brown GNT - Green

GNS - Green PUT - PurpleGYS - Gray ORT - OrangeNAS - Natural RDT - RedORS - Orange YLT - YellowRDS - Red 02T - BLT/GNT/GYS/ORT/

WHS - White PUT/RDT/WHS/YLTYLS - Yellow (ribbon only)01S - GYS/BKS

(dual only)This chart is to be used as an explanation of ourordering system. See individual listings followingthis page for sizes and colors available.

Material: Semi-flexible nylon tubing

Color: Clear/Translucent

Working Range: to 250 psig

Static Burst Pressure: Approx. 1000 psigUse With: Ferrule tubing connectors : 11923

3810-13810-2

Forming: May be formed into sharp corners with heat

Lengths Available: 50 and 500 feet

Order No.: NYT1-0403-CLT-__

.125 dia.

.250 dia.

.562

Type: Flexible, durable vinyl plastic hose, but two hosesmolded together, one side has rib entire length foridentification

Color: Solid: Gray/Black

Use Clamp: 5000-1

Working Range: 0 to 150 psig at 70˚F maximum 60 psigat 80˚F or above (max. temp. 100˚F)

Use: Ideal for feeding supply in on one line and out on theother, reduces labor; makes neat assembly; may beparted with any sharp cutting edge


Order No.: VYH2-0804-01S-__

Working Range: 0 to 105 psig at 70˚F maximum 60 psigat 80˚F or above (max. temp. 100˚F

Use With: Hose fittings: 11752-1, 11752-3 and 11924Hose clamps: 5000-2

Bend Radius: 3x hose diameter

Color: Solid: Gray, yellow, red, blue, green, black,white

Translucent: Clear


Order No.: VYH1-0804-__-__

.125dia.

.250dia.

1/4” O.D. Vinyl Hose(Former Part No. 3814-1)

Material: High pressure copper

Working Pressures: to 2500 psig

Static Burst Pressure: over 10,000 psig

Lengths Available: 50 feet

Use With: Ferrule tubing connectors #’s: 3810-13810-211923

Order No.: 3811-1-RL

.062 dia..125dia.

1/8” O.D. Copper Tubing

.125dia.

.093 dia.

1/8” O.D. Nylon Tubing(Former Part No. 3814-2)

Twin Vinyl Hose(Former Part No. 3814-3)

Type: Flexible, durable vinyl plastic hose

Working Range: 0 to 105 psig at 70˚F maximum 60 psigat 80˚F or above (max. temp. 100˚F

Color: Solid: Gray, yellow, red, blue, green, black,white, brown, orange

Translucent: Clear

Use With: Hose Fittings: 11752-2 and Clamp 5000-4


Order No.: VYH1-0402-__-__

.062 dia..125dia.

1/8” O.D. Miniature Vinyl Hose(Former Part No. 3814-5)

Note:Specify color on order, and use full product number (including code letters for color) as shown on Page 3. If no color is specified, clear will be furnished.



.125dia. .062 dia.

Working Range: 0 to 105 psig at 100˚F Maximum 120˚F

Static Burst Pressure: Over 500 psig at 70˚F

Color: Solid: Black, brown, white, grayTranslucent: Clear, blue, green, orange, red, yellow


Note: In normal application hose clamps are not requiredwith hose when used with Clippard hose barb fittings

Order No.: URH1-0402-__-__

.062 dia.

.125 dia.1

Type: Flexible, durable urethane hose

Working Range: 0 to 105 psig at 100˚F maximum 120˚F


Color: Solid: Gray, whiteTranslucent: Blue, green, orange, purple, red, yellow


Note: In normal application, hose clamps are not requiredwith hose when used with Clippard hose barb fittings

Order No.: URH8-0402-02T-050

.125 dia.

.250 dia.2

Type: Flexible, durable urethane hose

Working Range: 0 to 105 psig at 100˚F maximum 120˚F


Color: Solid: Gray, whiteTranslucent: Blue, green, orange, purple, red, yellow


Note: In normal application, hose clamps are not requiredwith hose when used with Clippard hose barb fittings

Order No.: URH8-0804-02T-050

.125 dia.

.250dia.

.500

Working Range: 0 to 105 psig at 100˚F

Static Burst Pressure: Approximately 425 psig at 70˚F

Color: Solid: Gray and black combination



Use: Ideal for feeding supply in on one line and out on theother; reduces labor; makes neat assembly; may beparted with any sharp cutting edge

Note: In normal application, hose clamps are not requiredwith 3814-13 hose when used with Clippard hose barbfittings

Order No.: URH2-0804-01S-__

1/8” O.D. Polyurethane Hose(Former Part No. 3814-7)

1/8” O.D. PolyurethaneRibbon Hose(Former Part No. 3814-9)

1/4” O.D. PolyurethaneRibbon Hose(Former Part No. 3814-12)

1/4” O.D. Twin PolyurethaneHose(Former Part No. 3814-13)



Color: Solid: Black, brown, white, grayTranslucent: Clear, blue, green, orange, red, yellow



Note: In normal application hose clams are not required withhose when used with Clippard hose barb fittings

Order No.: URH1-0804-__-__

.250dia.

.125dia.

1/4 O.D. Polyurethane Hose(Former Part No. 3814-6)







Color: Solid: Black, gray, orange, red, whiteTranslucent: Blue, clear, green, red, yellow


Note: Designed for use with push-in fittings.

Order No.: URT1-0805-__-__

.375dia. .245 dia.



Color: Solid: BlackTranslucent: Blue, clear, green, red



Order No.: URT1-1208-__-__



Color: Solid: BlackTranslucent: Blue, clear, green, red



Order No.: URT1-0604M-__-__

6mmdia. 4mm dia.

6 mm O.D. 95D Urethane TubingFlexible, durable ether based tubing



Color: Solid: Black, gray, orange, red, whiteTranslucent: Blue, clear, green, red, yellow



Order No.: URT1-0503-__-__

.157dia. .093 dia.

5/32”O.D. 95D Urethane TubingFlexible, durable ether based tubing

.250dia. .160 dia.

1/4” O.D. 95D Urethane TubingFlexible, durable ether based tubing

3/8” O.D. 95D Urethane TubingFlexible, durable ether based tubing




Colors: Solid: Black or Natural


Bend Radius: 1/2”


Order No.: PET1-0503-__-__

.157 dia. .106 dia.

5/32” O.D. Polyethylene TubingLinear low density tubing

Note:Specify color on order, and use full product number (including code letters for color) as shown on Page 3. If no color is specified, natural will be furnished.








Bend Radius: 1 1/4”

Note: Designed for use with push-in fittings

Order No.: PET1-0604M-__-__

6mmdia. 4mm dia.

6 mm O.D. Polyethylene TubingLinear low density tubing






Bend Radius: 1 1/4”


Order No.: PET1-0805-__-__

.250dia. .170 dia.







Bend Radius: 2”


Order No.: PET1-1208-__-__

.375dia.

.250dia.



.281dia.

.125dia.

Type: Flexible Buna-N hose with nylon braid covering

Working Range: 0 to 105 psig

Static Burst Pressure: Approx. 600 psig

Color: Black and yellow combination only


Use With: Fittings: 11752-1, 11924Clamp: 5000-1A

Order No.: 11763-RL

9/32” O.D. Braided Hose


.281.250

.437

Type: Zinc plated steel

Use: 5000-1 with Buna N hosetwin vinyl hose

Order No.: 5000-1

Quick Set Hose Clamps

.375 dia.

.375.343hex.

Type: Zinc plated steel

Use: 5000-1A with braided hose

Order No.: 5000-1A

Quick Set Hose Clamps

Material: Brass, press-on hose clamp

Use: for 3814-5 hose 1/16 I.D. vinyl

Installation: Simply place hose clamp over hose withflange end out; then press hose partially onto fitting,then slide clamp back toward fitting to secure

Options: (-NP)

Order No.: 5000-4

Reusable Hose Clamps

Press-On Hose Clamp

.343 .312

.562

.031

.156 dia.

.215

.250 dia.

.125 dia.

Polyethylene vs Vinyl vsPolyurethanePolyurethane offers a wider rangeof chemical compatibility thanVinyl, it may be used at muchhigher temperatures and clampsare not needed when used withbarb fittings. Linear low densitypolyethylene offers a lower costalternative to polyurethane andsuperior environmental stresscrack resistance over standardpolyethylene. Both polyurethaneand polyethylene are FDAapproved.

Typical Hose & TubingBend RadiiWhen using hose or tubing, careshould always be taken to avoidsharp bends to preventcompressing the inside diameterof the hose or tubing andrestricting flow. For extremelyclose connections, allow a shortloop of hose to avoid crimping.

3811-1 Copper Tube 1/16” 1/8” 3 x dia.

NYT1-XXX Nylon Tubing 3/32” 1/8” 3 x dia.

VYH1-XXX Vinyl Hose 1/16” 1/8” 3 x dia.

VYH1-XXX Vinyl Hose 1/8” 1/4” 2 x dia.

VYH2-XXX Dual Vinyl Hose 1/8” 1/4” 2 x dia.

URH1-XXX 85 Duro. Urethane Hose 1/16” 1/8” 2 x dia.

URH8-XXX Ribbon 85 Duro. Urethane 1/16” 1/8” -

URH1-XXX 85 Duro. Urethane Hose 1/8” 1/4” 2 x dia.

URH2-XXX Dual 85 Duro. Urethane 1/8” 1/4” 3 x dia.

URH8-0804-XXX Ribbon 85 Duro. Urethane 1/8” 1/4” -

URT1-0503-XXX 95 Duro. Urethane Tubing 3/32” 5/32” 3 x dia.

URT1-0604M-XXX 95 Duro. Urethane Tubing 4 mm 6 mm 2 x dia.

URT1-0805-XXX 95 Duro. Urethane Tubing 0.160” 1/4” 2 x dia.

URT1-1208-XXX 95 Duro. Urethane Tubing 0.245” 3/8” 3 x dia.

PET1-0503-XXX Polyethylene Tubing 0.106” 5/32” 3 x dia.

PET1-0604M-XXX Polyethylene Tubing 4 mm 6 mm 5 x dia.

PET1-0805-XXX Polyethylene Tubing 0.170” 1/4” 5 x dia.

PET1-1208-XXX Polyethylene Tubing 1/4” 3/8” 5 x dia.

11763 Braided Hose 1/8” 9/32” 2 x dia.

Clippard Hose or Tubing I.D. O.D.

Material: Brass, self-threading, reusable

Use With: 11765 Buna-N hose 3814- vinyl hose and

Clippard hose fittings

Installation: Slip sleeve over hose, push onto fitting,

then screw into place; tighten with wrench

Options: (-NP)

Order No.: 5000-2

Min. BendRadius


or ease in construction of pneumatic logic control and fluid

power systems, Clippard offers an extensive choice of useful

miniature fittings. Clippard fittings are designed for the greatest

flexibility, practical usefulness and for savings in time, cost and space.

From barbed fittings for 1/16” ID tubing to the new Push-Quick line,

Clippard has the fittings for you.

F

Push-Quick Fittings

Slip-On Fittings

Brass Fittings

Quick Connect Fittings

Fittings Kits

513.521.4261 • www.clippard.com/fittings/

Clippard Push-

Quick Fittings

provide a simple

method of

c o n n e c t i n g

p n e u m a t i c

components to

each other and

system piping.

They are

designed for

use with both

flexible hose and stiff tubing made of nylon,

urethane, polyethylene or polypropylene.

Push-Quick Fittings generally provide higher

flows than barbed fittings. The Push-Quick

fitting allows full flow through the hose/tubing

I.D. with no smaller orifice required as in barb fittings. The chart

shows the comparison between barb and push in fittings for various

tubing/hose sizes. Push-Quick Fittings are available in (4) sizes for

5/32”, 6mm, 1/4” and 3/8” O.D. tubing. The 5/32” fittings may also

be used with 4 mm O.D. tubing.

60

50

40

30

20

10

0

5/3

2 B

arb

5/3

2 P

ush

-Qu

ick

6m

m B

arb

6m

m P

ush

-Qu

ick

1/4

Ba

rb

1/4

Pu

sh

-Qu

ick

3/8

Ba

rb

3/8

Pu

sh

-Qu

ick

6.2

14

26.6

14.2

26.8

36

54

Flo

w -

SC

FM

Barb vs Push-Quick Fittings

Flow Comparison @ 100 PSIG

9.4

Push-Quick Fittings

Pressure Range: 0 - 150 psig @ 130˚F

Vacuum: 0 - 29.5 in Hg

Temperature Range: 32 to 140˚F

Media: Air, Non-Corrosive Water

Tube Pull Out Force: 20 lb. @ 75˚F (non-pressurized)

Burst Pressure: 350 psig @ 75˚F

Materials: Body - Plastic ResinMetal Stud - Nickel Plated BrassGripper Ring - Stainless SteelSeals - Buna-N

• Yellow release button indicates tube size

• Green release button indicates metric size

• Easy tube insertion for quick assembly of pneumatic circuits

• Pre-applied sealant on pipe threads

• Maximum flows in a reduced size

• Corrosion-resistant materials for long life

• Designed for use with both flexible hose and stiff tubing


S l i p - o n

f i t t i n g s

provide a

flexible, easy

alternative to

ferrule and

p u s h - t o -

c o n n e c t

d e s i g n

fittings.

Clippard slip-on fittings are designed to be

used with Clippard urethane hose. The flexibility and

strength of urethane hose and the compact design of the

fittings are ideal for pneumatic applications where

convenience and size are considerations. The Minimatic

slip-on fitting used with Clippard urethane hose will

provide a leak free connection that will hold well beyond

the working pressure of the hose without the need for

additional clamps.

Minimatic slip-on fittings are available in a wide

variety of configurations in a number of styles

including tee, connectors, crosses, swivel, and

universal. Barb sizes can be mixed on the same

fitting for applications requiring multiple tubing sizes.

The electroless nickel plating of Minimatic slip-on fittings

provides corrosion resistance in applications involving

high moisture, while enabling the fittings to retain their

original, lustrous appearance.

• Single barb design for quick and easy positive seal

• Miniature size provides low profile

• Multiple configurations for every need

• Electroless nickel plating

• Available with 1/16” or 1/8” hose barb

• Available with #10-32 thread and 1/8” NPT

• Holds to the burst pressure of polyurethane hose

The Minimatic® J-Series quick connect consists of

two component parts that are joined to form the

complete connector. The valve body contains a 2-

way spring-loaded poppet valve that is generally

connected to the main air supply. When the

poppet is not depressed, the air supply is shut-off

by this valve. The Cap contains a valve depressor

that when assembled to the valve body, depresses

the poppet allowing air to flow from the main

supply to circuitry or equipment downstream.

Valve body & cap assemblies contain both

components.

• High flow of 14 scfm @ 100 psig

• Space saving attractive miniature design

• Wide variety of connectors

• Adds convenience to equipment and circuits

• Fills the gap between clumsy, large quick

connects and smaller quick connects with

less flow

• Positive threaded connection, stays connected

• Medium: air, oil, and water

• Working Pressure: 0-150 psig max.

Minimatic® J-Series quick connect

fittings are very compact yet provide

a high flow of 14 scfm@ 100

psig. The electroless

nickel plated brass

body is available

with #10-32

threads, 1/8” NPT

threads, 1/4” NPT

threads or a 1/8”

hose single barb

configuration that is

ideal for use with

Clippard polyurethane hose.

Minimatic® Slip-On

FittingsJ Series Quick

Connect Fittings


Brass Fittings

Clippard brass fittings support thread sizes #3-56, #10-32,

1/16” and 1/8” NPT. From the first hose barb

manufactured by Clippard to today’s comprehensive

offering of over fifty fittings, Clippard can help with all

your connection requirements

Minimatic® swivel connector fittings are very efficient in

applications where joints need to be disconnected and

reconnected frequently. Made with a threaded

connection on one end and a swivel connection on the

other, these fittings provide a true cost savings on

pneumatic circuit designs. They are valuable also where

short lengths of hose are being connected.

Manifolds

You can choose from ready made

manifolds or select components and

construct any manifold suitable for your

requirements from the extensive Clippard line. All made

of the finest quality materials, use these manifold

components and permanent tubing connectors to assist

you in designing neat, compact and truly professional

fluid power, fluidic and logic control systems

and equipment.

Gaskets are recommended for use

with Clippard fittings. They

provide snug, dependable seals

without extra effort or materials. The

most popular gasket for static sealing of #10-32

threads is the 11761-2 Buna-N Gasket. This

gasket is included with packaged fittings and

comes installed on a variety of Minimatic® slip-

on fittings. Overtightening fittings with gaskets

may have a tendency to extrude the gasket. While

this may be a concern, the actual sealing is being

accomplished by a small piece of the gasket at

the base of the threads.

Gaskets

Bushings are available to adapt standard

pipes to #10-32 or NPT fittings, and

Clippard miniature components

Bushings Hose or Tubing Size TipThe use of different sizes of hose or tubing inyour circuits deserves some care andconsideration. In general, follow this guide forthe size of hose or tubing you use.

For air logic circuits, we recommend:1/16” ID for pilots1/8” ID for supplies and outputs

Documents

M ost tubing comes in many colors, and we recommend that