View
219
Download
2
Tags:
Embed Size (px)
Citation preview
MMSS VV
1
Scattering of flexural wave in a thin plate with multiple inclusions by using the null-field integral
equation approach
Wei-Ming Lee1, Jeng-Tzong Chen2, Rui-En Jiang1
1 Department of Mechanical Engineering, China Institute of Technology, Taipei, Taiwan
2 Department of Harbor and River Engineering, National Taiwan Ocean University, Keelung, Taiwan
2009年 06月 06日北台科技大學
National Taiwan Ocean UniversityMSVLAB ( 海大河工系 )
Department of Harbor and River Engineering
MMSS VV
2
Outlines
4. Concluding remarks
3. Illustrated examples
2. Methods of solution
1. Introduction
MMSS VV
3
Outlines
4. Concluding remarks
3. Illustrated examples
2. Methods of solution
1. Introduction
MMSS VV
4
Introduction
Inclusions, or inhomogeneous materials, usually take place in shapes of discontinuity such as thickness reduction or strength degradation .
The deformation and corresponding stresses caused by the dynamic force are induced throughout the structure by means of wave propagation.
MMSS VV
5
Scattering
At the irregular interface of different media, stress wave reflects in all directions scattering
The near field scattering flexural wave results in the dynamic stress concentration which will reduce loading capacity and induce fatigue failure.
Certain applications of the far field scattering flexural response can be obtained in vibration analysis or structural health-monitoring system.
MMSS VV
6
Literature review
From literature reviews, few papers have been published to date reporting the scattering of flexural wave in plate with more than one inclusion.
Kobayashi and Nishimura pointed out that the integral equation method (BIEM) seems to be most effective for two-dimensional steady-state flexural wave.
Improper integrals on the boundary should be handled particularly when the BEM or BIEM is used.
MMSS VV
7
Objective
For the plate problem, it is more difficult to calculate the principal values to treat the improper integral.
Our objective is to develop a semi-analytical approach to solve the scattering problem of flexural waves in an infinite thin plate with multiple circular inclusions by using the null-field integral formulation, degenerate kernels and Fourier series.
MMSS VV
8
Outlines
4. Concluding remarks
3. Illustrated examples
2. Methods of solution
1. Introduction
MMSS VV
9
Flexural wave of plate
4 4( ) ( ),u x k u x xÑ = Î WGoverning Equation:
u is the out-of-plane displacement k is the wave number
4 is the biharmonic operator
is the domain of the thin plates
u(x)
24
3
12(1 )
hk
D
E hD
wr
m
=
=-
ω is the angular frequency
D is the flexural rigidityh is the plates thickness
E is the Young’s modulus
μ is the Poisson’s ratio
ρ is the surface density
MMSS VV
10
Problem Statement
Problem statement for an infinite plate containing multiple circular
inclusions subject to an incident flexural wave
MMSS VV
11
The integral representation for the plate problem
MMSS VV
12
Kernel function
The kernel function is the fundamental solution which satisfies
MMSS VV
13
The slope, moment and effective shear operators
slope
moment
effective shear
MMSS VV
14
Kernel functions
In the polar coordinate of
MMSS VV
15
Direct boundary integral equations
Among four equations, any two equations can be adopted to solve the problem.
displacement
slope
with respect to the field point x
with respect to the field point x
with respect to the field point x
normal moment
effective shear force
MMSS VV
16
Oxr
f
Degenerate kernel (separate form)
iUeU
f
r
x
q
s
R
MMSS VV
17
Fourier series expansions of boundary data
MMSS VV
18
Boundary contour integration in the adaptive observer system
MMSS VV
19
Adaptive observer system
Source pointSource point
Collocation pointCollocation point
MMSS VV
20
Vector decomposition
MMSS VV
21
Transformation of tensor components
MMSS VV
22
Linear system
where H denotes the number of circular boundaries
MMSS VV
23
MMSS VV
24
Techniques for solving scattering problems
MMSS VV
25
The systems for surrounding plate and each inclusion
The continuity conditions
MMSS VV
26
MMSS VV
27
Dynamic moment concentration factor
Scattered far field amplitude
MMSS VV
28
Outlines
4. Concluding remarks
3. Illustrated examples
2. Methods of solution
1. Introduction
MMSS VV
29
Case 1: An infinite plate with one inclusion
Geometric data:a =1mThicknessPlate:0.002mInclusion: 0.001m
MMSS VV
30
MMSS VV
31
Distribution of dynamic moment concentration factors by using the present method and FEM
MMSS VV
32
The far field scattering pattern for a flexible inclusion with h1=h/2
MMSS VV
33
Far field backscattering amplitude versus the dimensionless wave number
MMSS VV
34
Case 2: An infinite plate with two inclusions
MMSS VV
35
MMSS VV
36
Distribution of dynamic moment concentration factors by using the present method and FEM( L/a = 2.1)
MMSS VV
37
Far field scattering pattern for two flexible inclusions with h1=h/2 and L/a=2.1
MMSS VV
38
Far field scattering pattern for two flexible inclusions with h1=h/2 and L/a=10.0
MMSS VV
39
Outlines
4. Concluding remarks
3. Illustrated examples
2. Methods of solution
1. Introduction
MMSS VV
40
Concluding remarks
A semi-analytical approach to solve the scattering problem of flexural
waves and to determine the DMCF and the far field scattering pattern in an infinite thin plate with multiple circular inclusions was proposed The present method used the null BIEs in conjugation with the degenerat
e kernels, and the Fourier series in the adaptive observer system.
DMCF of two inclusions is apparently larger than that of one when two
inclusions are close to each other.
Fictitious frequency of external problem can be suppressed by using the more number of Fourier series terms.
1.
2.
3.
4.
5.
The space between two inclusions has different effects on the near field
DMCF and the far field scattering pattern.
MMSS VV
41
Thanks for your kind attention
The End