M. DAVIS GROUP, LLC - Bidspotter.com

M. DAVIS GROUP, LLC

Short Order Dairy Plant Auction - Southern California

Ended Nov 24, 2014 5:06pm PT (Nov 25, 2014 1:06am GMT)

Online Only

6400 Regio Ave

Buena Park

California

90620

United States

Lot Description

1Aprox. 23-1/2" W x 35-1/2" L x 17" Deep Portable S/S COP Tank with Fristam 3 hp Centrifugal Pump, (3) Tri-Clover 2" S/S Air Valves,

Transfer Hose, Level Sensor and Allen Bradley MicroLogix 1000 PLC Controls ****RIGGING FEE $50.00***

2 Tri-Clover 2-1/2 inch 3-Way Long Stem Clamp Type S/S Air Valve, Model 361 Series, S/N 220861-001 ****RIGGING FEE $40.00***

3 Tri-Clover 3 inch 3-Way Long Stem Clamp Type S/S Air Valve, Model 361 Series ****RIGGING FEE $40.00***

4 Tri-Clover 3 inch 3-Way Long Stem Clamp Type S/S Air Valve, Model 361 Series ****RIGGING FEE $40.00****

4A WCB 2-1/2" 2-Way Clamp Type S/S Air Valve, Model WVALVE 04340, S/N 339223-03 ****RIGGING FEE $20.00****

5 Foxboro Magnetic Flow Tube 1-1/2" Flow Meters, Series 8000A ****RIGGING FEE $20.00****

6 3 inch Clamp Type S/S Check Valve with Ball ****RIGGING FEE $20.00****

7 3 inch Clamp Type S/S Check Valve with Ball ****RIGGING FEE $20.00****

8 GPI 1-1/2 inch S/S Clamp Type Meter Valve with Display, Model 12550 with Butterfly Valve ****RIGGING FEE $20.00****

9Ampco 5 hp / 2.5 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head and 3450 / 1725 RPM Motor ****RIGGING

FEE $20.00****

9AAmpco 5 hp / 2.5 hp Centrifugal Pump, Model C216MDG18T-S, S/N CC45-784-1-1 with 2" x 1-1/2" Clamp Type S/S Head and 3450 /

1725 RPM Motor ****RIGGING FEE $20.00****

10Ampco 5 hp / 2.5 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head and 3450 / 1725 RPM Motor ****RIGGING

FEE $20.00****

10AAmpco 5 hp / 2.5 hp Centrifugal Pump, Model C216MDG18T-S, S/N CC45-930-1-1 with 2" x 1-1/2" Clamp Type S/S Head and 3450 /


11Ampco 5 hp / 2.5 hp Centrifugal Pump, Model C216MDG18T-S, S/N CC45-930-1-2 with 2" x 1-1/2" Clamp Type S/S Head and 3450 /


11AAmpco 10 hp Centrifugal Pump, Model AC316TD21T-E, S/N CC-64450-1-1 with 2-1/2" x 1-1/2" Threaded S/S Head and 3490 RPM

Motor ****RIGGING FEE $20.00****

11B Tri-Clover 5 hp Centrifugal Pump with 2" x 1-1/2" Threaded S/S Head and Baldor 3450 RPM Motor ****RIGGING FEE $20.00****

11C Tri-Clover 1.5 hp Centrifugal Pump with 2" x 1-1/2" Clamp Type S/S Head and Baldor 1725 RPM Motor ****RIGGING FEE $20.00****

12 Weigh-Tronix S/S Digital Scale, S/N 005444 with 9 x 9 Platform (12 x .005 lb. Capacity) ****RIGGING FEE $20.00****

12A Weigh-Tronix S/S Digital Scale, with 9 x 9 Platform (12 x .005 lb. Capacity) ****RIGGING FEE $20.00****

12B Doran S/S Digital Scale, Model 4100 Class III (30lb X .005lb Capacity) ****RIGGING FEE $20.00****

13 Assorted 1 inch to 3 inch Clamp Type S/S Sanitary Grade Fittings including: Elbows, T's and Reducers ****RIGGING FEE $20.00****

14 S/S Clamps - (9) 1 inch and (19) 1-1/2 inch ****RIGGING FEE $20.00****

15 2 inch S/S Clamps ****RIGGING FEE $10.00****

16 2-1/2 inch S/S Clamps ****RIGGING FEE $10.00****

17 2-1/2 inch S/S Clamps ****RIGGING FEE $10.00****



20 Assorted 2 inch and 3 inch Heavy Duty S/S Clamps ****RIGGING FEE $10.00****

21 Assorted 1-1/2 inch to 9 inch S/S Clamps ****RIGGING FEE $10.00****

23 Assorted 1-1/2" to 4" Line Wrenches including Caps and Nuts ****RIGGING FEE $10.00****

24 Graco Type Pneumatic Sanitary Barrel Pump with Hose ****RIGGING FEE $10.00****

25 (10) Pc. Assorted Wash Baskets and Ladles ****RIGGING FEE $10.00****

26 APV 10 hp / 7-1/2 hp Centrifugal Pump with 2-1/2" x 2" Threaded S/S Head and 3225 / 2930 RPM Motor ****RIGGING FEE $10.00****

26AG & H 10 hp Centrifugal Pump, Model GHC-1 with 2-1/2" x 2" Clamp Type S/S Head and 3510 RPM Motor ****RIGGING FEE

$25.00****

26B APV 10 hp / 7-1/2 hp Centrifugal Pump with 2-1/2" x 1-1/2" Clamp Type S/S Head and 3525 / ? RPM Motor ****RIGGING FEE $25.00***

27 Viton Portable Foamer ****RIGGING FEE $40.00****



30 Klenzade Model T Jr. Portable Foamer ****RIGGING FEE $20.00****

31 Portable Foamer ****RIGGING FEE $20.00****

32 Encon Emergency Portable Eyewash Station ****RIGGING FEE $10.00****

33 Cannon S/S Bossy Carts ****RIGGING FEE $10.00****

35 SMS Portable Roll-Fed Labeler, S/N 0359, Includes Pallet of Labeler Parts with (2) Bases and Head ****RIGGING FEE $60.00****

36 Advance Pacesetter 20SD Floor Polisher, 175 RPM/1.75 hp ****RIGGING FEE $20.00****

37 EcoLab FaciliTraxx Scrub Station ****RIGGING FEE $20.00****

38 (2) S/S Tables with (4) Ecolab Chemical Feed Pumps ****RIGGING FEE $30.00****

38A 2" and 3" Inline S/S Filters, Clamp and Threaded Type ****RIGGING FEE $20.00***

38B Flow Data 2" Clamp Type S/S Flow Meter Body, Model FD20F-6113-2420-000 ****RIGGING FEE $30.00****

38C Toshiba 7.5 hp VFD, Type VT130G2+4080, 460 V, 3 Phase ****RIGGING FEE $30.00****

39 Anderson AJ-300 Digital Chart Recorders ****RIGGING FEE $60.00****

40 Bottle Turners ****RIGGING FEE $50.00****

41Vizio 42" LCD TV, 1080p Full HD, Model VIZIO-V042L-FHDTVNA, S/N LPPBWBK110164 includes Wall Mount Bracket and (3) Pelco

Security Cameras ****RIGGING FEE $10.00****

42 Aprox. 6 ft. L x 31" W x 36" H S/S Table ****RIGGING FEE $10.00****

43 Aprox. 5 ft. L x 30" W x 35" H S/S Table with Rounded Edges ****RIGGING FEE $10.00****

44 Retractable S/S Hose Reels ****RIGGING FEE $20.00****

45Aprox. 30 Gal. Hinged Lid S/S Tank with Tri-Clover 1.5 hp Centrifugal Pump and Lumenite Probe (Cream Tank) - (Tank Dimensions

Aprox. 19" W x 23" Deep) ****RIGGING FEE $50.00****

49 Valve APV 3 inch Air Valve Cluster, Model SW4 ****RIGGING FEE $60.00****

50 Valve APV 3 inch Air Valve Cluster, Model SW4 ****RIGGING FEE $60.00****

51 Valve APV 3 inch Air Valve Cluster ****RIGGING FEE $40.00****

52 APV 3 inch Air Valves (Note: Missing Bottoms) ****RIGGING FEE $20.00****

53 APV 3 inch Air Valves (Note: Missing Bottoms) ****RIGGING FEE $20.00****

54 APV 3 inch Air Valves (Note: (4) Missing Bottoms and (2) Missing Stems) ****RIGGING FEE $20.00****

55 APV 3 inch 2-Way Air Valves ****RIGGING FEE $10.00****

56 APC 2 inch 2-Way Air Valves ****RIGGING FEE $10.00****

57 APV 2 inch 2-Way Air Valve Cluster with (3) Extra 2 inch APV Air Valves ****RIGGING FEE $60.00****

58 APV 2 inch 2-Way Air Valve Cluster ****RIGGING FEE $60.00****

59 APV 2 inch 2-Way Air Valve Cluster ****RIGGING FEE $60.00****

88

Alfa Laval Cold Bowl CIP Separator/Centrifuge, Model CMRPX418, S/N 4000255 with (2) Control Panels - (1) with Allen Bradley SLC

5/01 PLC Controls, PanelView 550 Touch-Pad Display, (2) Metering Valves, Tri-Clover Air Valves, Separator Tools, Some Spare Parts

with Gang Box (Located Outside) ****RIGGI ...[more]

89 Spare Separator Motor for Alfa Laval MRPX418 Separator/Centrifuge ****RIGGING FEE $50.00****

95

Crepaco/APV 40,000 Gal. Jacketed S/S Silo, S/N 3500, with Tri-Clover Air Valves, Air Agitation, Alcove, Level Sensor, Sprayballs

(Chilled Water Jacket) (Glycol Refrigerated) (Overall Dia. 11 ft. 8" W) (Silo #1) ****RIGGING FEE / REBLOCK / RETILING FEE

$7,200****

96Crepaco/APV 40,000 Gal. Jacketed S/S Silos, S/N 3503, with Tri-Clover Air Valves, Air Agitation, Alcove, Level Sensor, Sprayballs

(Chilled Water Jacket) (Glycol Refrigerated) (Overall Dia. 12 ft. W) (Silo #2) ****RIGGING FEE / REBLOCK / RETILING FEE $7,200****

97

Crepaco/APV 40,000 Gal. Jacketed S/S Silos, S/N 3706, with Tri-Clover Air Valves, Air Agitation, Alcove, Level Sensor, Sprayballs and

ABB Chart Recorder (Chilled Water Jacket) (Glycol Refrigerated) (Overall Dia. 12 ft. W) (Silo #7) ****RIGGING FEE / REBLOCK /

RETILING FEE $7,200****

98Fristam 7-1/2 hp Centrifugal Pump, Model FPX3522-145, S/N 0202040 with 2-1/2" x 2" Clamp Type S/S Head and Baldor 3625 RPM


99Fristam 2 hp Centrifugal Pump, Model FPX3531-160, S/N 353173472 with WEG 1800 RPM S/S Clad Motor, 208-230/460 V and 2-1/2

inch x 2 inch Clamp Type S/S Head ****RIGGING FEE $100.00****

100Fristam 2/1.5 hp Centrifugal Pump, Model FPX3531-150, S/N 353173470 with Dayton 1740/1440 RPM S/S Clad Motor, 208-230/460 V

and 2-1/2 inch x 2 inch Clamp Type S/S Head ****RIGGING FEE $100.00****

101Fristam 2/1.5 hp Centrifugal Pump, Model FPX3531-135, S/N 353173470 with Dayton 1740/1440 RPM S/S Clad Motor, 208-230/460 V

and 2-1/2 inch x 2 inch Clamp Type S/S Head ****RIGGING FEE $100.00****

102Fristam 2 hp Centrifugal Pump, Model FPX3531-150, S/N 353173471 with WEG 1800 RPM S/S Clad Motor, 208-230/460 V and 2-1/2

inch x 2 inch S/S Clamp Head ****RIGGING FEE $100.00****

103Fristam 2 hp Centrifugal Pump, Model FPX731-160, S/N 31173285 with WEG 1715 Rpm All S/S Clad Motor, 208-230/460 V and 2 inch

x 1-1/2 inch Clamp Type S/S Head ****RIGGING FEE $100.00****

104Fristam 3 hp Centrifugal Pump, Model FPX1741-175, S/N 141173160 with 1740 RPM Motor, 230/460 V and 2-1/2 inch x 2 inch Clamp

Type S/S Head ****RIGGING FEE $100.00****

105 Fristam 5 hp Centrifugal Pump, Head S/N 353273335 with 2-1/2" x 2" Clamp Type S/S Head ****RIGGING FEE $100.00****

106 Klenzade Portable S/S Foamer ****RIGGING FEE $25.00****

113

Aprox. 45 ft. x 3-1/4" W S/S Product Conveyor with Straight Sections, Bends, Rinse Tunnel, (2) Hydraulic Drives, Combiner, Leg

Supports and Allen Bradley PLC Controls with Allen Bradley Micro Display (NOTE: Includes Some 3-1/4" W Chain) ****RIGGING FEE

$450.00****

120Aprox. 26 Ft. L x 3-1/4" W S/S Product Conveyor with Rinse Tunnel, (2) Hydraulic Drives, Leg Supports (NOTE: Includes Some 3-1/4"

W Chain)

126 Superior Roll Tak 200 Portable Labeler with 7 ft. 9” L Mounted Conveyor, All S/S ****RIGGING FEE $240.00****

127 Dairy Conveyor Hydraulic Drop Caser with Allen Bradley SLC 5/01 PLC Controls ****RIGGING FEE $300.00****

1304-Sections Aprox. 50 ft. L x 3-1/4" W S/S Product Conveyor with (1) Drive, Rinse Tunnel and Leg Supports ****RIGGING FEE

$200.00****

133Hydraulic Case Stacker with Allen Bradley SLC 150 PLC Controller, (Note: Worked with Former Quart Carton Filling Line) ****RIGGING

FEE $450.00****

140

Aprox. 160 ft. L APV All S/S Overhead Case Conveyor System, Rex Plastic Chain, 15 inch W S/S Pan, Straight Sections, Bends,

Combiner, Drives, (4) Case Inverters, Pneumatic Lane Diverters, Micro Switches, Ceiling Supports and Allen Bradley SLC 5/01 PLC

Controls (NOTE: Runs From Filling Room Ending at ...[more]

1422 inch Flow Verter Station with 7-Connecting Points with (3) Jumpers and Tri-Clover Air Valve includes Piping Ending at Ceiling

****RIGGING FEE $300.00****

1432-1/2 inch Flow Verter Station with 8-Connecting Points with (4) Jumpers and (2) Tri-Clover and APC 2 inch Air Valves, (2) G & H 2-1/2

inch Air Actuated Butterfly Valves includes Piping Ending at Ceiling ****RIGGING FEE $300.00****

1442 inch Dual Station Flow Verter Station Each with 9-Connecting Points with (3) Jumpers includes Piping Ending at Ceiling (NOTE: Does

Not Include Air Valves) ****RIGGING FEE $500.00****

1453 inch Flow Verter Station with 4-Connecting Points with (2) Jumpers includes Piping Ending at Ceiling (NOTE: Does Not Include Air

Valves) ****RIGGING FEE $300.00****

146 CP Aprox. 1 hp Pump with 2-1/2 inch x 2 inch Welded S/S Head ****RIGGING FEE $25.00****

147PLC Process Control Panel with (3) Allen Bradley 16-Slot Remote PLC Racks, Cat #1771-A4B (NOTE: Does Not Include Any Wiring or

Condulet Outside the Panel) ****RIGGING FEE $25.00****

148Flow Meter Control Panel includes (4) Foxboro I/A Series Flow Meter Read-Outs, Model IMT25 with Solenoids, Air Regulators (NOTE:

Does Not Include Wiring or Condulet Outside Panel) ****RIGGING FEE $25.00****

149CM Lodestar 2-Ton Electric Hoist includes Trolley, S/S Gantry, Aprox. 9 ft. I-Beam and Aprox. 8" W x 12 ft.. 8" H Leg Support System

****RIGGING FEE $25.00****

150

Remaining Installed 2" to 3" S/S Piping including: Flowverter Station, Tri-Clover Air Valve, Air Actuated Butterfly Valve, Hangers (NOTE:

Does Not Include Glycol or Chilled Water Supply Lines Connected to the Ceiling - Only Includes Piping Near Silos) ****RIGGING FEE

$50.00****

151Honeywell Digital S/S Chart Recorder, Model DR4500 (Located in Control Cabinet) (NOTE: Does Not Include Cabinet) ****RIGGING

FEE $50.00****

152Hope Industries 18" W Touch-Pad Display, Series HIS-ML18, S/N ML2001144 (Located in Control Cabinet) (NOTE: Does Not Include

Cabinet) ****RIGGING FEE $50.00****

153Allen Bradley SLC 500 PLC Controller with Enclosure (Legal PLC for HTST System) (Located in Control Cabinet) (NOTE: Does Not

Include Cabinet) ****RIGGING FEE $50.00****

154Allen Bradley Remote PLC Controller, Cat #1771-A4B-B 16-Slot Chassis including Power Supply (Located in Control Panel) (NOTE:

Does Not Include Control Cabinet) ****RIGGING FEE $50.00****

155Accurate 2" Flow Meter, Model IZMS-50-ECDY, S/N 38954-C22 includes Accurate Digital Read-Out (Located in Cabinet Above)

****RIGGING FEE $100.00****

159

2006 DCI 10,000 Gal. Jacketed Refrigerated S/S Silo, S/N C97D-5160-A with Horizontal Agitator, (2) Tri-Clover Air Valves, Model 316,

Sprayball, Level Sensor, Aprox. 10 ft. W Dia.) (Silo #T-12) (Glycol Refrigerated) (Located Near Break Room) ****RIGGING FEE /

REBLOCK / RETILING FEE $2,900****

160Fristam 7-1/2 hp Centrifugal Pump, Head S/N 355173475 with 3" x 2-1/2" Clamp Type S/S Head and Reliance 1750 RPM Motor

(Located Near Break Room) ****RIGGING FEE $25.00****

160AFristam 7-1/2 hp Centrifugal Pump, Head S/N FPX355196443 with 3" x 2-1/2" Clamp Type S/S Head and Baldor 1770 RPM Motor

(Located Near Break Room) ****RIGGING FEE $25.00****

161Fristam 7-1/2 hp Centrifugal Pump, S/N FPX3522962444 with 3505 RPM Motor, 230/460 V and 2-1/2 inch x 2 inch Clamp Type S/S

Head (Located Near Break Room) ****RIGGING FEE $25.00****

162Fristam 2 hp Centrifugal Pump with 2" x 2" Clamp Type S/S Head and 1750 RPM Motor (Located Near Break Room) ****RIGGING FEE

$25.00****

163APV 3 hp Centrifugal Pump, Model 6V2 with WEG 3510 RPM S/S Clad Motor, 208-230/460 V and 2-1/2 inch x 1-1/2 inch Clamp Type

S/S Head (Located Near Break Room) ****RIGGING FEE $25.00****

164 Tri-Clover Air Valve Cluster, 761 and 361 Series (Located Near Break Room) ****RIGGING FEE $125.00****

165 Flow Data 2 inch Clamp Type S/S Flow Meter (Located Near Break Room) ****RIGGING FEE $25.00****

166Anderson 3 inch Clamp Type S/S Flow Meter, Model IZMS080D1200, S/N 0809044 with Accurate Digital Read-Out, Model AMS-B52P

(Located On Main Product Floor Above Lot #155) (Located Near Break Room) ****RIGGING FEE $25.00****

168(2) Flow Verter Stations - 3 inch and 2-1/2 inch with (5) and (3) Connecting Points includes Piping Ending at Ceiling and Remaining

Installed 2-1/2" to 3" S/S Piping in Room with (2) Check Valves (Located Near Break Room) ****RIGGING FEE $300.00****

169 Honeywell Digital S/S Chart Recorder, Model DR4500 (Located Near Break Room) ****RIGGING FEE $20.00****

170 Honeywell Digital S/S Chart Recorder, Model DR4500 (Located Near Break Room) ****RIGGING FEE $20.00****

173

3-Tank CIP System with 400 Gal. S/S Tanks, (90 inch H x 37 inch W), Includes Fristam 20 hp Centrifugal Pump, Tri-Clover Air Valves,

S/S Shell and Tube Heat Exchanger, Controls and Honeywell Digital S/S Chart Recorder, Model DR4500 (Located in Receiving Bay)

****RIGGING FEE $3,000****

179Fristam 15 hp Centrifugal Pump, Model FPR3551-250, S/N 0712006 with 3" x 2-1/2" Clamp Type S/S Head and Baldor 1760 RPM


180Fristam 15 hp Centrifugal Pump, Model FPX3551-250, S/N 355173476 with 3" x 2-1/2" Clamp Type S/S Head and Reliance 1765 RPM


181Fristam Aprox. 15 hp Centrifugal Pump, Model FPX3551-250J, S/N 355172185 with 3" x 2-1/2" Clamp Type S/S Head including 2-1/2"

Clamp Type S/S Check Valve ****RIGGING FEE $50.00****

182Fristam 5 hp Centrifugal Pump, Model FPX3531-1, S/N FPX35310304869 with 2-1/2" x 2" Clamp Type S/S Head and 1750 RPM Motor

****RIGGING FEE $50.00****

183(2) Tri-Clover 2 inch and (1) Tri-Clover 2-1/2 inch 2-Way and 3-Way Clamp Type S/S Air Valves, (2) Model 761 Series and (1) 771

Series ****RIGGING FEE $300.00****

184 Top Line 3" Air Actuated Ball Valves ****RIGGING FEE $100.00****

185(3) Pc. Receiving Bay Controls including (2) Hope Industries Touch-Pad Displays and Anderson AJ-300 Chart Recorder ****RIGGING

FEE $500.00****

186

Installed 1-1/2 inch Up To 3 inch S/S Piping Throughout Receiving Bay includes 3 inch Flow Verter Station, Hangers, I(3) Check Valves

and Tri-Clover Air Valve (NOTE; Does Not Include Any Piping Above Raw CIP System or Piping, Valves or Fittings Surrounding Silos or

Press) ****RIGGING FEE $600.00*** ...[more]

187 Advanced Tabco 2-Bowl S/S Sink ****RIGGING FEE $100.00****

188Aprox. 10,000 Gal. Epoxy Lined Liquid Sugar Tank with Viking Sugar Pump, Valve, Varec Tank Gauge and Top Mounted UV System

****RIGGING FEE $2600.00****

190

4-Tank CIP System with (2) 1,200 Gal Tanks, (119 inch H x 55 inch W) and (2) 700 Gal. Tanks, (Aprox. 119 inch x 42 inch W), Includes

Filters, (2) ABB Flow Meters with Read-Outs, (2) Fristam 20 hp Circulating Pumps, Tri-Clover Air Valves with Controls and Honeywell

Digital S/S Chart Recorder (NOTE: C ...[more]

192

Liberty 6-Head Hydraulic HDPE Blow Molder, Model RS 4000-6D, S/N 89026, with Aprox. 54-1/4" L x 9" H Tie Bar Spacing, Upgraded

Air Barrel System, Omron PLC Controls, Storch Resin Loader, Cooling Bed, Ferguson Trimmer, Model FD300, S/N G116085-6-222,

AIS Leak Detector and Spare Parts, 89491 Metered H ...[more]

193

Uniloy 4-Head HDPE Blow Molder, Model 350R2, S/N 350R-2724 with Aprox. 36-1/2" L x 10" H Tie Bar Spacing, Upgraded Air Barrel

System, Allen Bradley SLC 500 PLC Controls, Allen Bradley Rockwell VFD Upgrade, Conair Resin Loader, Cooling Bed, Uniloy

Trimmer, Model 10026 and AIS Leak Detector, 23579 Met ...[more]

194Foremost 15 hp Resin Regrinder, Model HD-6, S/N 3510B includes Blower, 460 V, 3 Phase (Operated with Liberty Blow Molder Located

in Pit) ****RIGGING FEE $1,100.00****

195Foremost 15 hp Resin Regrinder, Model HD-6, S/N 21800 includes Blower, 460 V, 3 Phase (Located in Center Pit) ****RIGGING FEE

$1,100.00****

196Foremost 15 hp Resin Regrinder, Model HD-6, S/N 20468 includes Blower, 460 V, 3 Phase (Operated with Uniloy 4-Head Blow Molder

Located in Pit) ****RIGGING FEE $1,100.00****

197 Conair Resin Filter, Model DC, S/N 204393 with Sutorbilt Rotary Blower ****RIGGING FEE $150.00****

198 Conair Resin Filter, Model DC, S/N 204395 with Sutorbilt Rotary Blower ****RIGGING FEE $75.00****

199 Tornado Portable Barrel Vacuum with Attachments ****RIGGING FEE $75.00****

210AIS HDPE Half Gal. and Gal. Ground Level and Overhead Aluminum Jug Conveyor System includes Alpines, Straight Sections, Bends

with Drives and Controls (NOTE: Running From Blow Molding Room Into Filling Room) ****RIGGING FEE $4,600.00****

22090,000 lb. Cone-Bottom Carbon Steel Resin Silo with 12” Butler Slide Gate and Kistler-More Sonologic II Digital Read-Out (Silo Dia.

Aprox. 9 ft. 9" W) (Located Outside) ***RIGGING FEE $3,900.00***

226 VideoJet Excel Ink Jet Coder, Model Excel, S/N 88G01001 (Located 2nd Floor Above Air Compressors) ***RIGGING FEE $50.00***

227 VideoJet Excel Ink Jet Coder, Series 10, S/N 88G12005 (Located 2nd Floor Above Air Compressors) ***RIGGING FEE $50.00***

230 Aprox. 9 ft. L All S/S Case Washer with (2) Fristam and APV Pumps ***RIGGING FEE $1,000.00***

231 Dairy Conveyor All S/S Top Out Destacker, S/N 719 with Waste Chute and Case Drive ***RIGGING FEE $2,400.00***

2322008 Dairy Conveyor Aprox. 4 ft. L All S/S Case Positioner with Allen Bradley MicroLogix 1000 PLC (Located Between Destacker and

Case Washer) ***RIGGING FEE $1,980.00***

233 Aprox. 9 ft. L All S/S Case Washer with (2) Fristam and APV Pumps ***RIGGING FEE $1,000.00***

234 Dairy Conveyor All S/S Top Out Destacker, S/N 718 with Waste Chute and Case Drive ***RIGGING FEE $600.00***

2352008 Dairy Conveyor Aprox. 4 ft. L All S/S Case Positioner with Allen Bradley MicroLogix 1000 PLC (Located Between Destacker and

Case Washer) ***RIGGING FEE $360.00***

236Aprox. 90 ft. Dairy Conveyor S/S Above Ground Case Conveyor System with Rex Chain, Lane Diverters, Lane Stops (Running Out of

Case Depalletizer Ending at Case Stacker (NOTE: Does Not Include Drives) ***RIGGING FEE $600.00***

237 Cannon Hydraulic Case Depalletizer with Allen Bradley SLC 150 PLC Controls including Pallet Stacker ***RIGGING FEE $1,240.00***

238 Cannon 20 hp Hydraulic System with Continental PVR15 Pump and Reservoir ***RIGGING FEE $400.00***

239 Cannon 20 hp Hydraulic System with Continental PVR15 Pump and Reservoir ***RIGGING FEE $400.00***

242 Racine 40 hp Hydraulic Pump System and Reservoir ***RIGGING FEE $200.00***

247 Hydro Engineering EHGV Hydro Blaster Stationary Pressure/Steam Jenny ***RIGGING FEE $200.00***

249Crepaco / APV 2 - Barrel Ice Cream Freezer, Model D6355, S/N W215G with (2) Beater Bars, (2) Dashers and Controls (Ammonia

Cooled) ***RIGGING FEE $350.00***

250Crepaco / APV 3 - Barrel Ice Cream Freezer, Model KM340, S/N 3095 with Spare Parts, (Note: 3rd Barrel Not Utilized) (Not Complete)

***RIGGING FEE $350.00***

250A Crepaco KM340 Freezer Dasher Assembly ***RIGGING FEE $35.00***

250B Crepaco KM340 Freezer Dasher Assembly ***RIGGING FEE $35.00***

250C (8) Pc. - Crepaco KM340 Assorted Freezer Parts including Dasher, Beater Bars and Shafts ***RIGGING FEE $35.00***

250D Crepaco KM340 Relined Ice Cream Freezer Barrel ***RIGGING FEE $35.00***

250E Crepaco KM340 Ice Cream Freezer Barrel ***RIGGING FEE $35.00***

261Toyota 2,600 lb. 36-Volt Sit-Down Electric Forklift, Model 5FBCU15, S/N 60638 with 3-Stage 189 inch H Lift, Side Shift and Hobart 36 V

Charger, S/N 191CS01743 (Unit #4) (Operational) ***RIGGING FEE $100.00***

262Toyota 2,600 lb. 36-Volt Sit-Down Electric Forklift, Model 5FBCU15, S/N 60651 with 3-Stage 189 inch H Lift, Side Shift and Trojan II

Battery Charger, S/N A7068 (Unit #3) (Operational) ***RIGGING FEE $100.00***

263Toyota 2,600 lb. 36-Volt Sit-Down Electric Forklift, Model 5FBCU15, S/N 60652 with 3-Stage 189 inch H Lift, Side Shift (Unit #5) (NOTE:

Reported Bad Battery) ***RIGGING FEE $50.00***

264 Forklift Attachment - Workmaster Man Lift Platform ***RIGGING FEE $50.00***

265Toyota 6,000 lb. 24-Volt Electric Pallet Jack, Model 6HBE30, S/N 6HBE30-21046 with Ferro 100 PowerHouse 24 V Charger, S/N MPI

280184 (Unit #9) (Operational) ***RIGGING FEE $50.00***

266Toyota 6,000 lb. 24-Volt Electric Pallet Jack, Model 6HBE30, S/N 6HBE30-21071 with GNB 24V Charge 100 Battery Charger, S/N

9510642F (Unit #10) (NOTE: Reported Bad Battery) ***RIGGING FEE $50.00***

267Crown 6,000 lb. 24-Volt Electric Pallet Jack, Model PE3540-60, S/N 6A155883 (Unit #3) (NOTE: Reported Bad Battery) ***RIGGING

FEE $100.00***

268Poly Pack Aprox. 10 ft. L Shrink Wrapper/Tunnel, Model IL-24L, S/N 3149, with Koyo Direct Logic 205 Controls, (2) Mitsubishi E500

VFD's and AVG Digital Display, 480 V, 3 Phase (Located Outside) ***RIGGING FEE $190.00***

270Poly Pack S/S Tray Former, Model 35, S/N 3148 with Koyo Direct Logic 205 Controls, Mitsubishi E500 VFD's and AVG Digital Display,

480 V, 3 Phase (Located Outside) ***RIGGING FEE $190.00***

271WCB Aprox. 5 hp Positive Displacement Pump, Model 060, S/N 251547 with 2-1/2" Threaded S/S Head and 1750 RPM Motor (Located

Outside) ***RIGGING FEE $25.00***

272

Walker Aprox. 1,500 Gal. Dome-Top Cone-Bottom S/S Processor, Model PZ-CB, S/N 25-00-304SS SP-6942 with Bottom and Side

Scrape Surface Agitator and Dual Sprayball, Jacket 100 psi @ 250 Degree with Ladder (Aprox. Dimensions 96” H x 66” W), (Tank #PT-

19), (Located Outside) ***RIGGING FE ...[more]

273Cherry Burrell 1,000 Gal. S/S Dome-Top Processor, Model EPD, S/N 1000-62-965 with Side and Bottom Sweep Agitator, S/S Bottom

(Located Outside) ***RIGGING FEE $200.00***

274Deam Single S/S Case Stacker, Model HS-20, S/N 97-007-11 with 8 ft. H S/s Case Inverter (Located Outside) ***RIGGING FEE

$50.00***

275Elliot S/S Box Former, Model 9306-G, S/N 97828 with Allen Bradley MicroLogix 1400 PLC Controls (Located Outside) ***RIGGING FEE

$160.00***

276Elliot S/S Tray Former, Model TF-9201, S/N 97827 with Allen Bradley SLC 500 Programmable Controls (Located Outside) ***RIGGING

FEE $160.00***

277Elliot Servo-Pac 3-in-1 Tray Former/Packer/, Model 9110 with Allen Bradley 10-Slot SLC 500 PLC Chassis, Cat #1746-A10 with

PowerFlex 4 VFD (Located Outside) ***RIGGING FEE $600.00***

281Preferred Packaging Case Sealer, Model CT75 (Note: Top/Bottom with no Taper Heads (Located Outside) ***RIGGING FEE $10

0.00***

282 DeLaval S/S Plate Press Frame, Model P5-VRB, S/N 3689 with (50) S/S Plates (Located Outside) ***RIGGING FEE $40.00***

283Aprox. 270 Gal. Single Shell Vertical S/S Tanks with Dish Top, Dish Bottom, S/S Legs, (Interior Dimensions Aprox. 74” H x 36” W)

(Located Outside) ***RIGGING FEE $300.00***

284Aprox. 270 Gal. Single Shell Vertical Dome-Top S/S Tanks, (Diam. Aprox. 48” W x 48” H) with Lids (Located Outside) ***RIGGING FEE

$300.00***

285APV S/S Plate Press, Model SR310, S/N 26009 with (3) Dividers, (208) S/S Plates, including Hot Water Set (Located Outside)

***RIGGING FEE $200.00***

286Aprox. 700 Gal. S/S Hinged Lid Processor with Bottom Sweep Agitator, Baffle, Dual Sprayball, Stainless Bottom, Steel Legs, (Interior

Dimensions Aprox. 64” W x 49” H), (NOTE: Dent on Side of Tank) (Located Outside) ***RIGGING FEE $200.00***

287Aprox. 700 Gal. S/S Hinged Lid Processor with Stainless Bottom, Steel Legs, Top Mounted Agitator (Interior Dimensions Aprox. 64” W x

49” H) (NOTE: Does Not Include Shaft) (Located Outside) ***RIGGING FEE $200.00***

288Aprox. 700 Gal. Dome-Top Cone-Bottom S/S Processor with Bottom and Side Scrape Surface Agitator, Baffle, Dual Sprayball (Tank

Dimensions Aprox. 45" H x 72" W) (NOTE: Agitator Motor and Drive Not Included) (Located Outside) ***RIGGING FEE $200.00***

291 Orion 7 ft. H Pallet Wrapper, Model H66/17, S/N 2003-0813467 with 48" Platform (Located Outside) ***RIGGING FEE $175.00***

2922001 Horiba Enda 4000 Gas Analyzer Cabinets ,Model ENDAE420L, S/N P-1430 Single Phase (Located Outside) ***RIGGING FEE

$60.00***

2932006 WS Packaging Inline Labeler, Model Roll Tak 300 Wrap System, S/N JN52017-1, Roll Feed with Allen Bradley MicroLogix 1200

PLC, AD VFD's Kall Morgen Servo Drive with Mounted CSS Bottle Orienter (Located Outside) ***RIGGING FEE $75.00***

294Sullair 150 hp Screw Ammonia Compressor, Model C25S3-717-2.6-150 hp, S/N 05601129, S/N Head – 007-96000918 with Frick Touch

Pad Display, 3530 RPM Motor, 230/460 V, (Located Outside) ***RIGGING FEE $200.00***

295Evergreen Gable Top Quart Carton Filler, Model Q-14, S/N 8233 with 2-Lane Design, Touch-Pad Controls, Filler Bowl, Foam Free

Valves, Enclosure on Factory Skid (Located Outside) ****RIGGING FEE $575.00****

296APV Gaulin 5,000 GPH 3-Piston Homogenizer, Model 5000-804-15TPN, S/N 14859941 with 100 hp Drive, 1185 RPM, 230/460 V, 5000

psig (NOTE: Does Not Include Micro-Gap Valve and Pressure Gauge) (Located Outside) ****RIGGING FEE $300.00****

297 Aprox. 50 Gal. S/S Balance Tank with Lid (Located Outside) ****RIGGING FEE $50.00****

298Aprox. 135" L x 20" W x 17" Deep S/S Pipe Wash Trough, with APV Aprox. 7-1/2 hp Pump includes Some S/S Pipe and Fittings

(Located Outside) ****RIGGING FEE $120.00****

299 3-Compartment S/S Sink - Aprox. 31" W x 8 ft. L (Located Outside) ****RIGGING FEE $25.00****

299ATri-Clover 2 hp Positive Displacement Pump, Model PRZ250T-U-UH4-S-L, S/N517986-01 with 3” Threaded S/S Head and Baldor 3450

RPM Motor, Mounted on Portable Frame, (Located Outside) ****RIGGING FEE $25.00****

299B

2007 AMF Versa Pack S/S Spot Packer, Model 49905937, S/N 2007063, with Allen Bradley Logix 5561 PLC Controls, (3) PowerFlex 4

VFD's, (2) Allen Bradley Ultra 3000 Servo Drives, Allen Bradley Panel View 700 Touch-Pad Display including Infeed and Outfeed

Conveyor with Bottle Orienter (Utilized For Cult ...[more]

299CCMC Gilbreth Tamper Evident Sealer, S/N 50598, Utilizes 8" W Roll Sealer with Some Spare Parts (Utilized for Ice Cream Products)

(Located Outside) ****RIGGING FEE $200.00****

299D(15) Pallets Assorted Machine Parts including: Ice Cream Machine Parts, Case Conveyor Parts, Plumbing Fittings, Drives, Chart

Recorders, Hydraulic Pump Parts, Forklift Seats (Located Outside) ****RIGGING FEE $300.00****

299E Aprox. 2-Ton Portable Crane with Barrel Dollie (Located Outside) ****RIGGING FEE $25.00****

300Milk Dump System with 400 Gal. S/S Tank, (Aprox. 50 inch W x 49 inch H), Includes APC Air Valve, Strainer, Sprayball, Check Valve, 7-

1/2 hp Centrifugal Pump (Located in Cooler) ****RIGGING FEE $800.00****

301Aprox. 85 ft. S/S Product Conveyor includes Eagle Incline, (3) Drives, 3-1/4" W (NOTE: Does Not Include Chain) (Located in Cooler)

****RIGGING FEE $800.00****

301A(13) Assorted Fiberglass Ladders, A-Frames, Extension from 4 ft. H to Aprox. 20 ft H including (1) 3-Step Stool (Located in Cooler)

****RIGGING FEE $20.00****

301B Bil-Jax Pro-Jax 2-Tier High Utility Scaffold (Located in Cooler) ****RIGGING FEE $20.00****

302Cannon Hydraulic Case Palletizer, S/N 291 with Pallet Stacker Allen Bradley SLC 5/01 CPU Controls and Endra Heesch-Holland

Strapper, Type H2M, S/N 2345 (Located in Cooler) ****RIGGING FEE $2750.00****

307Cannon 7.5 hp All S/S Above Ground Case Drive, 1765 RPM, 50:1 Ratio (Located in Cooler) ****SUBJECT TO CONFIRMATION****

****RIGGING FEE $700.00****

308Dairy Conveyor 5 hp All S/S Above Ground Case Drive, 1750 RPM (Located in Cooler) ****SUBJECT TO CONFIRMATION****

****RIGGING FEE $900.00****

309Cannon 7.5 hp Above Ground Case Drive, 1745 RPM, 52:68 Ratio (Located in Cooler) ****SUBJECT TO CONFIRMATION****

****RIGGING FEE $700.00****

310Cannon 10 hp Above Ground Case Drive, 1755 RPM, 52.11 Ratio (Located in Cooler) ****SUBJECT TO CONFIRMATION****

****RIGGING FEE $900.00****

311 7.5 hp Above Ground Case Drive (Located in Cooler) ****SUBJECT TO CONFIRMATION**** ****RIGGING FEE $350.00****

312 7.5 hp Above Ground Case Drive (Located in Cooler) ****RIGGING FEE $350.00****

313 5 hp Above Ground Case Drive (Located in Cooler) ****RIGGING FEE $350.00****



316 Cannon 10 hp Above Ground Case Drive, 1755 RPM, 52.68 Ratio (Located in Cooler) ****RIGGING FEE $410.00****

317 10 hp Above Ground Case Drive, 1760 RPM, 52.11 Ratio (Located in Cooler) ****RIGGING FEE $410.00****

318 10 hp Above Ground Case Drive, 1755 RPM, 52.11 Ratio (Located in Cooler) ****RIGGING FEE $410.00****

319 7.5 hp Above Ground Case Drive, 52.11 Ratio (Located in Cooler) ****RIGGING FEE $410.00****

320 Aprox. 7.5 hp Above Ground Case Drive, 52.11 Ratio (Located in Cooler) ****RIGGING FEE $400.00****

321 7.5 hp Above Ground Case Drive, 1760 RPM (Located in Cooler) ****RIGGING FEE $400.00****

322 7.5 hp Above Ground Case Drives (Located in Cooler) ****RIGGING FEE $600.00****

323 7.5 hp Above Ground Case Drives (Located in Cooler) ****RIGGING FEE $600.00****

3242008 Barry-Wehmiller Pneumatic All S/S Case Pusher, Model Parallel Pusher, S/N EV20A140 with Allen Bradley MicroLogix 1000 PLC

Controls (Located in Cooler) ****RIGGING FEE $900.00****














Controls (Located in Cooler) ***RIGGING FEE $900.00***

333 Pneumatic All S/S Lane Diverter (Located in Cooler) ***RIGGING FEE $1,500.00***

334 Rex Case Conveyor Chain Throughout (2) Rooms (NOTE: Does Not Include Pan) (Located in Cooler) ***RIGGING FEE $250.00***

335Case Conveyor Control Cabinet with (3) Allen Bradley SLC 150 PLC Controllers with Programmer, Switches, Relays including S/S

Enclosure (Located in Cooler) ***RIGGING FEE $300.00***

349 Diagraph Ink Jet Coder Stands, Model IJ3000 with Spare Head (Located in Cooler) ***RIGGING FEE $200.00***

3502 inch and 3 inch Sanitary Piping including: Elbows, Connectors, Threaded and Clamp Type on (7) Pallets (Located in Cooler)

***RIGGING FEE $200.00 INCLUDES BOXING***

351 Assorted Hose on (2) Pallets (Located in Cooler) ****RIGGING FEE $20.00****

352 Aprox. 6 ft. L S/S Conveyor Section with 3-1/4 inch Chain (NOTE: No Drive) (Located in Cooler) ****RIGGING FEE $20.00****

353 Pallet of Assorted Conveyor Chain by Morse and Others (Located in Cooler) ****RIGGING FEE $20.00***

354Assorted Air Valves, Butterfly Valves, Ball Valves, Tank Parts, Valve Parts, Chemical Feed Parts, Pump Parts and Air Blow Downs on

(6) Pallets (Located in Cooler) ****RIGGING FEE $20.00***

355 Miscellaneous Cleaning Buckets, Rubbermaid Trash Cans, Brooms, Shovels, Rubbermaid Cart (Located in Cooler)

356CIP Control Panel with Allen Bradley 8-Slot PLC Remote Rack, Cat #1771-A2B, Allen Bradley PanelView Plus Logix Module Touchpad

Display, Cat #271P-R2A and Anderson Chart Recorder (Located in Cooler) ****RIGGING FEE $20.00***

356AAllen Bradley Control Panels, Model EP4-1SS, S/N 0908515631-02, Model EP4-1SS, S/N 0908515631-01, and Other Spare Control

Box (Located in Cooler) ****RIGGING FEE $20.00***

357 (4) Aluminum Dunnage Racks (Located in Cooler) ****RIGGING FEE $20.00***

357A (4) Pallets of Assorted Motors and Drives (Located in Cooler) ****RIGGING FEE $20.00***

357B Flammable Cabinet (Located in Cooler) ****RIGGING FEE $20.00***

357C Cannon S/S Case Inverter (Located in Cooler) ****RIGGING FEE $20.00***

357D Aprox. 5 hp Case Drive (Located in Cooler) ****RIGGING FEE $20.00***

357E Enpac Poly Barrel Dollie (Located in Cooler) ****RIGGING FEE $20.00***

358 Assorted 1 inch to 3 inch Transfer Hose (Located in Cooler) ****RIGGING FEE $50.00***

359Suncast Aprox 54 inch L x 24 inch W x 24 inch Deep Storage Bin with Rack including Rubbermaid 2-Door Storage Cabinet (Located in

Cooler) ****RIGGING FEE $20.00***

360 Portable Pneumatic Lube System and Barrel Pumps (Located in Cooler) ****RIGGING FEE $60.00***

361 Burning Cart with Torch, Hose, Regulators and Fire Extinguishers (Located in Cooler) ****RIGGING FEE $60.00***

362 Assorted Copiers by IBM and Canon (Located in Cooler) ****RIGGING FEE $200.00***

363 Assorted S/S Tables and Stands (Located in Cooler) ****RIGGING FEE $20.00***

364 20 hp Circulating Pumps (Located in Cooler) ****RIGGING FEE $60.00***

365 Crank (Located in Cooler) ****RIGGING FEE $40.00***

366 125 hp Motor, 1180 RPM, 460 V, 3 Phase (Located in Cooler) ****RIGGING FEE $40.00***

366A Sterling 125 hp Motors, Model 1256VGF4A3, S/N 74-40240 (Located in Cooler) ****RIGGING FEE $40.00***

367 GE 75 hp Motor, 3555 RPM, 230/460 V, 3 Phase including Case Drive (Located in Cooler) ****RIGGING FEE $60.00***

368 Morse 1,500 lb. Capacity Forklift Barrel Lifter, S/N 0800 (Located in Cooler) ****RIGGING FEE $20.00***

369 (3) Case Drives with Control Panel and Bin including Chain Located on (3) Pallets (Located in Cooler) ****RIGGING FEE $120.00***

370 37-Sections 2-High Pallet Racking (2-Pallets Per Slot = 148 Pallet Spaces) (Located in Cooler) ****RIGGING FEE $1,000.00***

371 Case Conveyor Drives, Control Panel, Fairbanks Scale, and Portable Pump (Located in Cooler) ****RIGGING FEE $620.00***

372 Dewalt and Milwaukee Chop Saws (Located in Cooler) ****RIGGING FEE $20.00***

373 Jet Horizontal Band Saw, Model HVBS-7M, S/N 414457 (Located in Cooler) ****RIGGING FEE $50.00***

373A (2) Pallets Assorted Rex Case Conveyor Chain (Located in Cooler) ****RIGGING FEE $40.00***

373B Aprox. 8 ft. L S/S Product Conveyor with 10" W Plastic Chain and (1) Drive (Located in Cooler) ****RIGGING FEE $30.00***

373C Linx 4900 Ink Jet Coder with Single Head and Stand (Located in Cooler) ****RIGGING FEE $40.00***

373D WCB 3" 2-Way Clamp Type S/S Air Valves (Located in Cooler) ****RIGGING FEE $40.00***

378Aprox. 13 ft. L x 9 ft. W x 7 ft. H Modular Cooler with Climate Control Single Fan Blower, Top Mounted Freon Compressor, Chart

Recorder and Cage Racks (Located Near Maintenance Shop) ****RIGGING FEE $3,400.00***

380

Spare Parts Located on First Floor Only including: Blow Mold Parts, Electrical including: Some Allen Bradley, Omron, Starters,

Breakers, Condulet Parts, Drive Parts including Pulleys, Chain, V-Belts, Steel Shelving with Racks, Cabinets, Workbench, Nut & Bolt

Hardware, Some Hand Tools, Shafts and ...[more]

381

Contents of 2nd Floor Spare Parts including: Machine Parts, Forklift Parts, Caser and Stacker Parts, Sanitary Fittings, Filters, Filler

Parts, Air Cylinders, Drive Parts including: Sprockets, Pullies, Chain, Plumbing Fittings, Blow Mold Parts (NOTE: Does Not Include Any

Installed Fixtures) (SUBJECT ...[more]

382Aprox. 14 ft. W x 29 ft. L Mezzanine Platform with Steel Deck Floor, All Bolted Steel Constructed with Supports, I-Beams, Stairs, Hand

Rail - Rated at 50,000 lb. Load Capacity (Located in Cooler) ****RIGGING FEE $1,800.00***

383Spare Parts Located in Boiler Room including: Cylinder, Hydraulics, Hydraulic Pump, Heat Exchanger Bundle, (2) Sections of Racking

(Located in Boiler Room) ****RIGGING FEE $50.00***

384 CD Batteries Ferro Five 36 V Forklift Battery Charger (Located in Refrigeration Room) ****RIGGING FEE $50.00***

391 MasterBilt 2-Door S/S Cooler, S/N 124471 (Located by Silo Room Through Break Room) ****RIGGING FEE $50.00***

393 Continental Single Door S/S Freezer, S/N H9514958 (Located Process Floor) ****RIGGING FEE $60.00***

394 2-Door S/S Storage Cabinet (Located Process Floor) ****RIGGING FEE $60.00***

395 2-Door S/S Storage Cabinet (Located Process Floor) ****RIGGING FEE $60.00***

396 Cotterman Aprox. 7 ft. - 300 lb. Capacity Portable Stairs (Located Process Floor) ****RIGGING FEE $60.00***

401(5) Pcs. - Cole Palmer MasterFlex LS High Performance Vitamin Pumps, Model 7014-0 with Digital Read-Outs (NOTE: Some Missing

Parts (Located in Lab) ****RIGGING FEE $100.00***

402 Vitex Micro Processor Vitamin Pumps, Model 900-0996 with Digital Read-Out (Located in Lab) ****RIGGING FEE $100.00***

403 Foss Milko Scans, Model 132A/TS (As Is) (Located in Lab) ****RIGGING FEE $100.00***

404 (3) Pcs. - Quincy and Labline Incubators, - (1) Model 12-140 and Multi-fuge/Centrifuge (Located in Lab) ****RIGGING FEE $75.00***

405(2) Hand-Held Charm Testers, (2) VWR Heat Blocks, Charm Science Rosa Incubator with Printer, Test Kits and Tubing (NOTE: Does

Not Include Table/Counter) (Located in Lab) ****RIGGING FEE $100.00***

406 Contents of Cabinets including: Pump Parts, Gaskets, Tank Valve Parts ****RIGGING FEE $50.00***

407 Contrec Flow Meter Digital Read-Outs, Series Batch Controller 414 with Printers (Located in Lab) ****RIGGING FEE $100.00***

408 Breddo Type Likwifier Agitator (Located in Lab) ****RIGGING FEE $20.00***

Documents

M. DAVIS GROUP, LLC - Bidspotter.com