27
LVDS to DVI Conversion Box IA-542-B Instruction Manual Ver.1.10

LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

LVDS to DVI Conversion Box

IA-542-B

Instruction Manual

Ver.1.10

Page 2: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10
Page 3: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

LVDS to DVI Conversion Box

IA-542-B Instruction Manual

2009.12

Ver.1.10

ASTRODESIGN,Inc

Page 4: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10
Page 5: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

CCoonntteenntt

Before Use ..............................................................................................................................................................................................................................................iii

Chapter 1 About IA-542-B................................................................................................................................................................................................................1 1.1 Outline ...................................................................................................................................................................................................................................1 1.2 Features ...............................................................................................................................................................................................................................1 1.3 Parts and their functions .............................................................................................................................................................................................2

1.3.1 IA-542-B front panel.........................................................................................................................................................................................2 1.3.2 IA-542-B rear panel..........................................................................................................................................................................................2 1.3.3 Mode Switch settomg......................................................................................................................................................................................3

Chapter 2 ...................................................................................................................................................................................................................5Specifications

2.1 Main features.....................................................................................................................................................................................................................5 2.1.1 Input and output specifications..................................................................................................................................................................5 2.1.2 General specifications ....................................................................................................................................................................................5

2.2 LVDS Input..........................................................................................................................................................................................................................6 2.2.1 Pin assignment of the connector ..............................................................................................................................................................6 2.2.2 Bit assignment.....................................................................................................................................................................................................7

2.3 DVI output ........................................................................................................................................................................................................................10 2.3.1 Pin assignment of the connector ...........................................................................................................................................................10

2.4 Data input and output specifications .................................................................................................................................................................11 2.4.1 8 Bit ........................................................................................................................................................................................................................11 2.4.2 10 Bit......................................................................................................................................................................................................................13 2.4.3 16 (8+8)Bit..........................................................................................................................................................................................................14 2.4.4 16 (10+6)Bit .......................................................................................................................................................................................................14

2.5 Concerning the DDC power supply ........................................................................................................................................................................15

i

Page 6: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

ii

Page 7: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Before Use

Introduction

Thank you for very much purchasing the model IA-542-B LVDS to DVI conversion adapter. This manual contains details on the operation procedures to be followed when the IA-542-B is used, the checkpoints and precautions to be observed, and so on. Before using the IA-542-B, please read through these instructions. After reading the manual, keep it in a safe place for future reference.

Safety Precautions

In order to ensure safe operations

■ Do not subject the unit to impact omalfunction, explode or generate abnfire.

■ Do not use the unit where there is a da

■ If there is a thunderstorm while the swiits power, disconnect the power cabplace.

Concerning the power cord

* AC adaptor is an option.

■ Always take hold of the molded part

■ Do not use force to bend the power ca fire.

■ Do not place heavy objects on top ofcausing a fire or electrical shock.

Concerning foreign matter

■ Do not spill liquids inside the moniinto it. Operating the switcher undshocks and/or malfunctioning.

警 告 Warning

r throw it. Doing so may cause the switcher to ormally high levels of heat, possibly resulting in a

nger of ignition or explosions.

tcher is being used outdoors, immediately turn off le from the main unit, and move the unit to a safe

of the plug when disconnecting the power cord.

ord or bunch it up for use. Doing so may cause

the power cord. Doing so may damage the cord,

tor or drop inflammable objects or metal parts er these conditions may cause a fire, electric

iii

Page 8: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Concerning this product

■ When you turn on and off the power, connect the cable to make power on

Concerning impact

■ This is a precision instrument and,malfunctioning. Take special care wh

■ Do not drop the switcher.

Concerning the installation

■ Install the unit in a stable location.

When trouble or malfunctioning has oc

■ In the unlikely event that trouble or switcher’s power cable, and contarepresentative.

iv

 意 Caution

be sure to use power switch. If you take off and /off, it may damage the unit.

as such, subjecting it to impact may cause en moving the switcher.

curred

malfunctioning should occur, disconnect the ct your dealer or an ASTRODESIGN sales

Page 9: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Before use

What is packed with the unit

The unit comes with the following items. ・ IA-542-B Main unit ・ IA-542-B Instruction Manual : 1 pc ・ AC adaptor TAS2900 (Option)

TAS2900 specifications Rated output voltage 5V

Rated output current 2.0A

Input voltage 100 to 240 V

Input power line frequency 50Hz / 60Hz

v

Page 10: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

vi

Page 11: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

11 About IA-542-B

1.1 Outline

The IA-542-B (LVDS to DVI conversion adapter) converts LVDS inputs into DVI-D signals and outputs them.

1.2 Features ■LVDS signal is converted to DVI Dual Link signal.

■ 8 to 16Bit depth

■Input connector is MDR 26-pin.

■Bit assignment of LVDS input can be selected either DISM or Open-LDI.

1

Page 12: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

1.3 Parts and their functions

1.3.1 IA-542-B front panel

1ON 6 7 84 532

(A)(B)(C)(D)

Fig. 1.3.1 Names of each part

Item Description

(A) Power switch

Switching ON (DC IN) / OFF / ON (LVDS) of the unit.

Sync detecting LED (B)

Power LED (C) DVI output connector (D) Mode Switch setting

Use power switch when you turn on and off the

1.3.2 IA-542-B rear panel

(F)

Item

(E) FG

(F) DC jack (5V) (G) LVDS input con(H) LVDS input con

2

Detect the existence of Sync (upper LED) Lights when the power is on (lower LED)

Output DVI-D signal Refer to the Fig. 1.3.3

Caution power. If you take off and connect the cable to

make power on/off, it may damage the unit.

(G) (H)

(E)

Fig. 1.3.2 Names of each part

Description To have the common FG of IA-542-B and connected devices. Input from external power. (+5V)

nector (1Ch) LVDS input (1CH) connector nector (2Ch) LVDS input (1CH) connector

Page 13: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Chapter 1 About IA-542-B

1.3.3 Mode Switch setting

Fig. 1.3.3 Mode Switch setting

No. Item UP Down Note 1 Input Single Dual 2 Output Single Dual 3 Color Depth 8(+8)bit 10(+6)bit (+6) is for 16Bit Mode 4 16bit Mode ON OFF 5 Output Primary Upper Lower Primary port setting of DVI output 6 LVDS Bit Assign Dism O-LDI 7 Mode Switch 1 0 1 8 Mode Switch 2 0 1

Note 1 About the Mode switch depends on input bit number.

DVI output supports up to 8-bit. If the input signal has 9-bit or higher, the lower bit is assigned on the Dual Link side.

The mode switch should be set as below in that case.

Input bit number

Mode Switch Setting Note

SW3 UP 8bit

SW4 DOWN

SW3 DOWN 9-10bit

SW4 DOWN

SW3 UP 11-16bit (8+αbit) SW4 UP

LVDS input 1CH : 8bit LVDS input 2CH : αbit

SW3 DOWN 11-16bit (10+βbit) SW4 UP

LVDS input 1CH : 10bit LVDS input 2CH : βbit

Please refer to “2.4 Data input and output specification” about the details of input and output.

Note 2 About the Mode Switch 5 “Output Primary”

This is the function to switch Single Link and Dual link data of DVI output.

Use the monitor that supports DVI Dual Link. When you confirm the data of the Dual Link side, set the Mode Switch 5 is

down.

3

Page 14: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

4

Page 15: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

5

22 Specifications

2.1 Main features

2.1.1 Input and output specifications

Fig. 2.1.1 Input and output specifications

Item Description Input connector 2CH (MDR 26Pin)

Output connector 1CH ( DVI Dual link without HDCP) Bit numbers 8-16 bit

Single link in/ Single link out

25 - 135MHz ( 8-16 Bit )

Single link in/ Dual link out

50 - 135MHz ( 8 Bit )

Dual link in/ Single link out

25 - 150MHz ( 8-10Bit ) Dot Clock

Dual link in/ Dual link out

50 - 270MHz ( 8 Bit )

LVDS Bit assignment Dism / Open-LDI

2.1.2 General specifications

Fig. 2.1.2 General specifications

Item Description

Supply voltage +5V (supplied from AC adaptor or input connector) Power consumption

5W

Dimensions 100mm(W) x 150mm(D) x 40mm(H)

(excluding projected parts) Weight 0.44kg

Operation temperature

5 - 40 degrees centigrade

Storage temperature -10 – 60 degrees centigrade

Humidity 30 - 80RH% (no condensation)

Page 16: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

6

2.2 LVDS Input 2.2.1 Pin assignment of the connector

Connector : MDR (10226-1210-PE : 3M)

Fig. 2.2.1 Pin assignment of the LVDS input connector

Pin No. Signal Pin No. Signal 1 GND 14 RD+

2 RDG 15 RD-

3 DDC power

supply 16

DDC power supply

4 RCLK+ 17 RCLKG 5 RCLK- 18 DDC_SCL 6 RE+ 19 REG 7 RE- 20 RC+

8 RCG 21 RC-

9 DDC_SDA 22 RB+

10 RBG 23 RB-

11 GND 24 N.C 12 RA+ 25 RAG 13 RA- 26 GND

113

1426

Page 17: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Chapter2 Specifications

7

2.2.2 Bit assignment

Data assignment has DISM standard and OpenLDI standard.

Fig. 2.2.2 Bit assignment of the LVDS input - 8,10Bit

8bit mode 10bit mode Operating signal

Data No. DISM OpenLDI DISM OpenLDI RA0 R2 R0 R4 R0 RA1 R3 R1 R5 R1 RA2 R4 R2 R6 R2 RA3 R5 R3 R7 R3 RA4 R6 R4 R8 R4 RA5 R7 R5 R9 R5

RA

RA6 G2 G0 G4 G0 RB0 G3 G1 G5 G1 RB1 G4 G2 G6 G2 RB2 G5 G3 G7 G3 RB3 G6 G4 G8 G4 RB4 G7 G5 G9 G5 RB5 B2 B0 B4 B0

RB

RB6 B3 B1 B5 B1 RC0 B4 B2 B6 B2 RC1 B5 B3 B7 B3 RC2 B6 B4 B8 B4 RC3 B7 B5 B9 B5 RC4 HS HS HS HS RC5 VS VS VS VS

RC

RC6 DE DE DE DE RD0 R0 R6 R2 R6 RD1 R1 R7 R3 R7 RD2 G0 G6 G2 G6 RD3 G1 G7 G3 G7 RD4 B0 B6 B2 B6 RD5 B1 B7 B3 B7

RD

RD6 L L L L RE0 L L R0 R8 RE1 L L R1 R9 RE2 L L G0 G8 RE3 L L G1 G9 RE4 L L B0 B8 RE5 L L B1 B9

RE

RE6 L L L L

Page 18: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

8

Fig. 2.2.3 Bit assignment of the LVDS input - 16(8+8)bit

16(8+8)bit mode

DISM OpenLDI Operating

signal Data No.

CH1 CH2 CH1 CH2 RA0 R10 R2 R8 R0 RA1 R11 R3 R9 R1 RA2 R12 R4 R10 R2 RA3 R13 R5 R11 R3 RA4 R14 R6 R12 R4 RA5 R15 R7 R13 R5

RA

RA6 G10 G2 G8 G0 RB0 G11 G3 G9 G1 RB1 G12 G4 G10 G2 RB2 G13 G5 G11 G3 RB3 G14 G6 G12 G4 RB4 G15 G7 G13 G5 RB5 B10 B2 B8 B0

RB

RB6 B11 B3 B9 B1 RC0 B12 B4 B10 B2 RC1 B13 B5 B11 B3 RC2 B14 B6 B12 B4 RC3 B15 B7 B13 B5 RC4 HS HS HS HS RC5 VS VS VS VS

RC

RC6 DE DE DE DE RD0 R8 R0 R14 R6 RD1 R9 R1 R15 R7 RD2 G8 G0 G14 G6 RD3 G9 G1 G15 G7 RD4 B8 B0 B14 B6 RD5 B9 B1 B15 B7

RD

RD6 L L L L RE0 L L L L RE1 L L L L RE2 L L L L RE3 L L L L RE4 L L L L RE5 L L L L

RE

RE6 L L L L * In case of the bit width smaller than 16bit, lower bit is rounded down and positioned in the upper part.

Page 19: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Chapter2 Specifications

9

Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit

16(8+8)bit mode

DISM OpenLDI Operating

signal Data No.

CH1 CH2 CH1 CH2 RA0 R10 R0 R6 R0 RA1 R11 R1 R7 R1 RA2 R12 R2 R8 R2 RA3 R13 R3 R9 R3 RA4 R14 R4 R10 R4 RA5 R15 R5 R11 R5

RA

RA6 G10 G0 G6 G0 RB0 G11 G1 G7 G1 RB1 G12 G2 G8 G2 RB2 G13 G3 G9 G3 RB3 G14 G4 G10 G4 RB4 G15 G5 G11 G5 RB5 B10 B0 B6 B0

RB

RB6 B11 B1 B7 B1 RC0 B12 B2 B8 B2 RC1 B13 B3 B9 B3 RC2 B14 B4 B10 B4 RC3 B15 B5 B11 B5 RC4 HS HS HS HS RC5 VS VS VS VS

RC

RC6 DE DE DE DE RD0 R8 L R12 L RD1 R9 L R13 L RD2 G8 L G12 L

RD3 G9 L G13 L RD4 B8 L B12 L RD5 B9 L B13 L

RD

RD6 L L L L RE0 R6 L R14 L RE1 R7 L R15 L RE2 G6 L G14 L RE3 G7 L G15 L RE4 B6 L B14 L RE5 B7 L B15 L

RE

RE6 L L L L * In case of the bit width smaller than 16bit, lower bit is rounded down and positioned in the upper part.

Page 20: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

10

2.3 DVI output 2.3.1 Pin assignment of the connector

Connector :DVI-I (74320-1004 : molex)

Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS DATA2- 9 TMDS DATA1- 17 TMDS DATA0-

2 TMDS DATA2+ 10 TMDS DATA1+ 18 TMDS DATA0+

3 TMDS DATA2/4 G 11 TMDS DATA1/3 G 19 TMDS DATA0/5 G 4 TMDS DATA4- 12 TMDS DATA3- 20 TMDS DATA5-

5 TMDS DATA4+ 13 TMDS DATA3+ 21 TMDS DATA5+

6 DDC CLK 14 +5V(DDC power) 22 TMDS CLK G 7 DDC DATA 15 Ground 23 TMDS CLK+

8 N.C 16 SENSE 24 TMDS CLK-

C1 to5 N.C

1

9

17

8

16

24

C1 C2

C3 C4

C5

Page 21: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Chapter2 Specifications

11

2.4 Data input and output specifications 2.4.1 8 Bit

Input : Single / Output : Single

D0

[7:0]

CLK

CH1

CH2

【INPUT】 【OUTPUT】

D1

[7:0]

D2

[7:0]

D3

[7:0]

D1

[7:0]

CLK

Single

Dual

D2

[7:0]

D3

[7:0]

D4

[7:0]

Input : Single / Output : Dual

D0

[7:0]

CLK

CH1

CH2

【INPUT】 【OUTPUT】

D1

[7:0]

D2

[7:0]

D3

[7:0]

D0

[7:0]

CLK

Single

Dual

D2

[7:0]

D1

[7:0]

D4

[7:0]

Input : Dual / Output : Single

CLK

CH 1

CH 2

【 INPUT 】 【OUTPUT】

CLK

Single

Dual

D [0 7 : 0]

D [

D1

[

2

7 : 0]

D 1 D [

4

7 : 7 [ : 0] 0]

7:0]

D2

[ ]7:0

D 3[

0 7 : ]

D 4[

7 :0 ]

Page 22: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Input : Dual / Output : Dual

CLK

CH1

CH2

【INPUT】 【OUTPUT】

CLK

Single

Dual

D0

[7:0]

D2

D1 D4

[7:0]

[7:0]

[7:0]

D0

[7:0]

D2

D1 D4

[7:0]

[7:0]

[7:0]

12

Page 23: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Chapter2 Specifications

2.4.2 10 Bit

Input : Single / Output : Single

D0

[9:0]

CLK

CH1

CH2

【INPUT】 【OUTPUT】

D1 D2 D3 D0

[9:2]

CLK

Single

Dual

D0 D0 D0

D0

[1:0]

D0 D0 D0

[9:0] [9:0] [9:0] [9:2]

[1:0]

[9:2]

[1:0]

[9:2]

[1:0]

Input : Dual / Output : Single

CLK

CH1

CH2

【INPUT】 【OUTPUT】

D0

[9:2]

D0 D0 D0

D0

[1:0]

D0 D0 D0

[9:2]

[1:0]

[9:2]

[1:0]

[9:2]

[1:0]

CLK

Single

Dual

D0

[9:0]

D2

D1 D4

[9:0]

[9:0]

[9:0]

13

Page 24: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

2.4.3 16 (8+8)Bit

Input : Single / Output : Single

CLK

CH1

CH2

【INPUT】 【OUTPUT】

CLK

Single

Dual

D0

[15:8]

D1 D2 D3

D0

[7:0]

D1

[7:0]

D2

[7:0]

D3

[7:0]

[15:8] [15:8] [15:8]

D0

[15:8]

D1 D2 D3

D0

[7:0]

D1

[7:0]

D2

[7:0]

D3

[7:0]

[15:8] [15:8] [15:8]

2.4.4 16 (10+6)Bit

Input : Single / Output : Single

CLK

CH1

CH2

【INPUT】 【OUTPUT】

CLK

Single

Dual

D0

[15:6]

D1 D2 D3

D0

[5:0]

D1 D2 D3

D0

[15:8]

D1 D2 D3

D0

[7:0]

D1

[7:0]

D2

[7:0]

D3

[7:0]

[15:8] [15:8] [15:8][15:6] [15:6] [15:6]

[5:0] [5:0] [5:0]

14

Page 25: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

Chapter2 Specifications

15

2.5 Concerning the DDC power supply

The LVDS output of the IA-542-B provides the DDC power (+5V) supply. The maximum supply current of the DDC power supply is shown below.

● from AC adaptor … Max 500 mA

● from LVDS connector … Max 50 mA

DDC power supply is output as Fig. 2.5.1 shows.

+5V

+5V

GND

Fig. 2.5.1 DDC power supply output circuit

Caution • Although the DDC power supply incorporates an overcurrent protection device, it should not be used at current levels exceeding the rating. • Under no circumstances must power be supplied from the connected

device to the DDC power supply. If power is connected, the IA-542-B and connected device may malfunction.

Page 26: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

16

Page 27: LVDS to DVI Conversion Box IA-542-B...Fig. 2.2.4 Bit assignment of the LVDS input - 16(10+6)bit 16(8+8)bit mode DISM OpenLDI Operating signal Data No. CH1 CH2 CH1 CH2 RA0 R10

IA-542-B Instruction Manual

NOTICE ● An incorrectly collated manual or a manual with missing pages will be

replaced. ● All copyrights pertaining to this product are the property of ASTRODESIGN. ● This manual may not be copied in whole or in part without written

permission. ● The contents of this manual are subject to change without prior notice due

to improvements. ● The manufacturer will not be liable for any effects caused by incorrect

operation. ● All inquiries concerning this product should be addressed to your dealer or

to the manufacturer at the contact numbers given below.

T0167A

● The products and product names mentioned in this manual are the trademarks and registered trademarks of the companies concerned.