Embed Size (px)
Citation preview
FREEWHILE STOCKS LAST
MARSHMALLOW EASTER EGGS
Ap
ril 2
015
This Month
ww
w.tr
ansn
et.c
o.n
z
When you spend over $500 (excl GST) on one invoice this month
LV JUICE
Two side cable access holes & one underneath
ECOPILLARDISTRIBUTION SERVICE PILLARS FOR LV NETWORKS
CRSM HEATSHRINK SLEEVES
PAGE 3
NEW ECOLIGHT HIGH BAY WITH MOTION SENSOR
PAGE 4
ON TRACK FOR TARGA 2015
PAGE 8
BENEFITS• Compact, environmentally
pleasing• Vandal resistant• Easy to install
Drilled, removable, durable flame retardant PVC panels
Removable mounting bracket
Tinned 250A Copper neutral bar with stainless studs
FEATURES• Fully modular system to meet all
network requirements• Accommodates multiple switchgear
combinations• Recyclable• Mechanically robust• Unique serial number
MATERIALS• Excellent UV stability Rotathene 6329
repurposed plastic
APPLICATIONS• Domestic• Commercial• Control
Models range from the slim EP0 up to the large and versatile EP6
Integrated ventilation system for moisture control
Multiple fastening options depending on security level required
ECOPILLAR
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
FUSING SOLUTIONS
TE DIN FUSES
APATOR RBK PRO SERIES HORIZONTAL DISCONNECTOR
Top Quality, IEC Approved DIN Style NH LV Fuse Links by TE Connectivity
� Terminal cover can be extended if multiple connections are made
� Full segmentation between phases for added safety
� Complete with terminal covers
� Security seal unit to base, not arc chute
� Arc chutes with steel deionization plates over top contacts
� Silver plated contacts provide low power loss
� Can accommodate up to two cables per phase
MOUNTING• On mounting plate
– RBK 000 Pro– RBK 00 Pro– RBK 1 Pro– RBK 2 Pro– RBK 3
• On double DIN rail– RBK 00 Pro
STANDARDS• IEC/EN 60947-1• IEC/EN 60947-3
Can be security sealed to base, not arc chute
Supply from top or bottom feed
Switch for locking/unlocking test holes
Removable cover with fuse link cover
Description label
Large lockable test holes to meet Cat IV rating requirements
FEATURES
HUGE RANGE IN STOCK!
Standard specifications
IEC EN 60269-2-1
Solid blade links also available
Rated Voltage: 690V AC
Class: gG/gL
Sizes 00-3
Rated breaking capacity:
120kA
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
CRSM HEATSHRINKABLE WRAP-AROUND REPAIR SLEEVE
CRSM wrap-arounds are a fast and permanent cable repair and sealing system. The repair sleeve is quickly fitted in place by means of its rail and channel closure. This labour-saving installation fits and seals all in one step. CRSM wrap-arounds are abrasion and corrosion resistant, and each size covers a range of cable sizes.
Raychem’s distinctive closure system, which incorporates a stainless steel channel slid over rails on the sleeve, keeps the wrap-around in place during installation but can be easily removed when the adhesive has set.
APPLICATIONS• Repair cable sheath damage
without cutting cable
• Underground joint sheath reinstatement (and in tight areas)
• Sealing cable glands
TECHNICAL DATA• Operating temperature range
-40°C to 120°C
• Shrink ratio 3:1
• Sealant lined
• Halogen free
• Abrasion corrosion and decay resistant
• IP68
• 100% waterproof
• Inner adhesive wall
• UV resistant
• Voltage class 1kV
Range covers from 11mm up to 150mm
AVAILABLE IN 300, 500 & 1500MM LENGTHS
FIND OUT MORE ABOUT CRSM ON YOUTUBE
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
NEW! LEDIL23-180MS HIGH BAY WITH MOTION SENSOR
This 180W high powered LED high bay is a direct replacement for the traditional 400W Metal Halide & Sodium high bays, and now a new motion control sensor option has been added to the range to optimise power savings even further. With a robust IP65 anodised oxide coated aluminium housing and 4mm anti-glare tempered glass lens it is well suited for most high bay environments.
NEW MOTION CONTROL SENSORAdding this optional sensor to the standard 180W model switches the light between maximum dim and full brightness when motion is detected (working height up to 12m). In places like warehouses or stores with areas or aisles that have frequent periods of no movement the light will sit in a dimmed state during these periods, using less than 50W of power. Additional energy savings vary depending on the frequency of movement but can be as much as 85%.
FEATURES• IP65 anodised oxide coated aluminium
housing
• 4mm anti-glare tempered glass lens
• Acrylic lens available by special order if required
• No additional wiring or controls required – simply plug into existing outlet
• 180W at full power, 50W as full dim – light when you need it
• Smooth and seamless transition from maximum to minimum light output
• Can be set to either dim or switch off
• Over 50,000 hour hour lifespan
IDEAL FORWarehouses
Manufacturing facilities
Large commercial buildings
Stockrooms
Spaces with intermittent
occupancy and movement during
lighting period
CAT No.#LEDIL23-180MS MOTION SENSOR
*Non-sensor models are also available
ECOLIGHT
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
If your building has clear roof panels and frequent movement, the LEDIL23-180ACSEN is the perfect way to take advantage of daylight harvesting. This high bay has all the great features of the LEDIL23-180MS, but instead of a motion sensor it uses a light level sensor to dim the light when sufficient daylight comes through. This simple, yet effective solution requires no additional controls or wires - simply plug in and the light will do the rest. Daylight harvesting systems are often complicated and not set up correctly, but the LEDIL23-180SEN has been thoroughlytested to workquickly andeasily with no fuss andno wasted time.
ECOLIGHT INDUSTRIAL HIGH BAY WITH LIGHT SENSOR
ECOLIGHT
LED INDUSTRIAL
HIGH BAY
DAYLIGHT HARVESTING
When sufficient daylight is present
the light fitting automatically dims
Available with LEDIL23-180SEN 12am
Inte
rior l
ight
leve
l
6am 6pm 12am12pm
Energy savings on a fine day
Target light level
LED Lighting
Daylight
Energy savings
KEY
DAYLIGHT CONTROL SENSORThis sensor will adjust the light output
depending on the amount of natural daylight detected, and is customisable
depending on the position of the light. Proven savings in this application are an additional 65% when compared with a standard LED high bay (involving skylights in reasonable condition, on average or better weather days during daylight hours only).
Swapping from 400W metal halide high bay fittings to ECOLight LEDIL23-180 with integrated lighting controls can make significant savings in power consumption (depending on installation & occupancy).
See the LEDIL23-180 in action on
Vimeo
CAT No.#LEDIL23-180ACSEN LIGHT SENSOR
*Non-sensor models are also available
Installation Fitting Result
Building with no skylights, has movement and occupancy for >50% of the time the lights are on
LEDIL23-180ACStandard fitting offers the correct savings to this installation
Building with lots of natural daylight through roof mounted skylights, and movement and occupancy for >50% of the time that the lights are on.
LEDIL23-180SEN
Daylight sensor will create an additional 65% savings for the amount of time that the lights are on during daylight hours
Building has movement or occupancy for <50% of the time that the lights are on (in the area beneath the lights)
LEDIL23-180MSMotion sensor will create an additional 50-80% savings day and night.M
AX
IMU
M S
AV
ING
S C
HA
RT
- +2
3
Usable range of the sensor
1
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
FEATURES
• Non-contact detector clips
• Dual functions: Open phase and phase sequence detection
• Designed for checking a wider range of 3-phase power source from 75V to 1000V AC
• Brightness button feature for better visibility
• LED display lights with buzzer indicator
• Magnetic mounting feature
• CAT IV, 600V
FEATURES
• TRMS AC & DC voltage measurement
• TRMS AC current measurement
• Resistance measurement
• Frequency measurement
• Continuity test (acoustic signaling)
• Jaw size 26mm
• Power parameters measurement
• Dimensions (w x h x l): 78 x 40 x 189 mm
• Weight (without accessories): 192 g
TN895PR NON CONTACT PHASE ROTATION METER
MARTINDALE MARCM76 400A AC/DC CLAMP METER
METREL MD9235 CURRENT CLAMP
GREAT DEALS ON METERS
With its non-contact clips, the TN895PR has been designed to ensure greater safety for its users, eliminating any electrical or short circuit accidents caused by accidental contact between two metal points.
This general purpose clamp meter provides accurate measurement of AC and DC current, AC and DC voltage, resistance, frequency and capacitance. The clamp has a generous jaw diameter of 27mm and additional benefits include duty cycle, diode test and audible continuity sounder.
The MD9235 is a Slim-Jaw current clamp meter with ability to measure 3-Phase Unbalanced-Load + kWHr recording. A large easy-to-read display and one-handed operation make it extremely easy to use. This compact instrument combines a high level of functionality, small size and portability.
$199.00+ GST
Product # TN895PR
$295.00+ GST
Product # MD9235
FEATURES• CAT III 600V, Class II Double
Insulation• Torch between jaws• 4 1/2 digit LCD display with analog bargraph• Automatic polarity, positive implied, '-' for negative indication• Sampling Rate: 3 times per second, bargraph 30 times
per second• Hold function for difficult to access locations• Power: 3x1.5V batteries, AAA (included)• Operating Temperature: 0°C to +40°C• Low Battery Indicator• Auto Power Off• Weight: 340g approx (incl.
batteries)$160.00
+ GST
Product # MARCM76
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
DOMESTIC WRICON - RELIABLE & CONSTANT ELECTRICAL EARTH
TE EARTH CONNECTORS
EARTHING PRODUCTS
ContractConnections
CAT No.#TNC-6-CK DOMESTIC WRICON WITH CLAMP SYSTEM Customised lengths are available on request
COMPLETE SYSTEM:• Easy clamp system for connection to reinforcing mesh• 10 metres of 6mm PVC sheathed conduit wire• Shaped mild steel bar for
continuous earth• Bare end options available -
suitable for crimp terminal
KEY FEATURES OF SHEAR-LOK• Wedge Pressure Technology• Shear-head bolt for controlled torque• Removable without conductor damage• No special tools required• Application not inhibited by disfigured ground rod end• Taps into existing ground conductors
Simple and robust, these bolted connectors have a groove to ensure the correct placement of the conductor and are designed for single conductor parallel orientation. All these connectors can be easily removed should the need arise.B
RA
SS
EA
RTH
CLI
PS
AMP developed the SHEAR-LOK Copper Tap/Grounding Connector for applications in the power utility industry where connectors are required to withstand mid-range magnitudes of fault current (20kV symmetrical RMS).
SHEAR-LOK connectors utilise AMP Wedge Pressure Technology and controlled-torque-drive bolts to provide easily installed and highly reliable ground rod connections. This family of connectors is ideal for applications where reliable connections must be made between conductor and rod.
SHE
AR
-LOK
The WRICON Earthing System enables the entire earthing system to be located completely within the structure, providing a location away from any possibility of accidental damage or unauthorised disconnection.This safe and effective electrical earth is permitted under the E.W.R of New Zealand, with the lead safely cast within the concrete and reinforcing steel in the foundations providing an indestructible earth electrode. It offers permanent prevention of galvanic corrosion and is much less subject to seasonal changes than other earthing methods.
TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.
TransNet New Zealand Ltd
Auckland20 Neilpark DriveEast TamakiAucklandNEW ZEALAND Ph 0800 442 182 Fax 0800 442 183PO Box 39 383 Howick, Auckland
Wellington18 Sydney StreetPetoneWellingtonNEW ZEALAND Ph 04 576 2530Fax 04 576 0040PO Box 39 383 Howick, Auckland
NEW ZEALAND
TransNet Equipment Pty Ltd
PerthUnit 20, 8 Hurley StreetCanning Vale WA 6155PerthAUSTRALIA Ph +61 8 9256 3417Fax +61 8 9256 3917PO Box 1439Canning Vale DC WA 6970
AUSTRALIA
TransNet Tonga
Ma’ufangaSmall IndustriesMa’ufangaTONGA Ph +67 627 939Fax +67 627 976 PO Box 2932Nukualofa
TONGA
ON TRACK FOR TARGA 2015Team starts the year with a win
Following up on their massive Targa
victory last year, defending champions
Glenn and Spencer have kicked off the
year with success at the Metalman
Targa NZ Rally Sprint 2015 on the 8th
of March. The ECOLight team notched
up the win at Ardmore Airport not
only in their class event but also came
out on top of the overall leaderboard,
reinforcing their standing as one of the
Targa frontrunners for the year ahead
and their Mitsubishi Evo 8 as the car to beat.
Despite it being the first event of the year the team wanted to come out strong and
set a pace for the year to come, with the intent of winning all three events in 2015.
They faced serious competition from the other contenders in the
Allcomers 4WD class, particularly Leigh Hopper and Simon
Fitzpatrick, who narrowly took out the third stage and in two stages
closed the gap between them to one second. But Glenn and Spencer
fought hard to keep the lead, and finished the day with no issues and a
winning margin of 26 seconds.
The team’s great run is testament to their ever-growing experience,
having dedicated long hours to the behind-the-scenes groundwork on
the car and the courses to anticipate every
eventuality. They managed to avoid
incidents that impeded several of the other
teams and are set to continue this
performance in the future.
It was great to be able to see the team
perform well at a local event. Ever
prepared, they are already looking forward
to the next event on the calendar, the Targa
Bambina in May.
ECOLIGHT
www.transnet.co.nz
Check out our new range of metalware products on our website
