LUXAFLEX ROLLER BLINDS WITH PATENTED Edge TECHNOLOGY · between the linking blinds is minimised (17mm). The optional aligner connector has been designed with special patented technology

SIMPLY SMARTER BY DESIGN

LUXAFLEX® ROLLER BLINDS WITH PATENTED Edge TECHNOLOGY

EDGE

Ergonomically

Designed for

Greater

Efficiency

LUXAFLEX® ROLLER BLINDS WITH Edge TECHNOLOGY


INTRODUCTIONIntroducing Luxaflex® Roller Blinds with patented EDGE technology, our roller blind hardware system developed by an international design team specifically for our requirements.

Featuring a sleek architectural design with smooth operation and

unrivalled inner strength, EDGE technology allows you to span

even the largest window beautifully. Highly durable hardware

delivers smooth and reliable operation.

luxaflex.com.au4

EDGE Features & Benefits

Can be operated using either standard

chain drive or motorised technology.

The durable standard chain drive is

available in two ratio mechanism 1:1 and

1:1.75. The standard 1:1.75 ratio enables a

heavier blind to be lifted without the need

of a spring booster. But you can nominate

to use the optional 1:1 ratio. It is also

aesthetically pleasing in one size format for

a consistent look throughout the home.

Universal spring loaded idle ends provide

for smooth and easy installation.

The aluminium tube has been engineered

to perform well with minimal deflection over

large expanses.

SMOOTH AND LIGHT OPERATION

Hardware components are available in four

colour options – White, Black, Grey and

Magnolia.

All brackets are universal in design which

means the operating side can be changed

simply on site if required.

Two bracket sizes are available, 38mm and

55mm which ensures the correct bracket

can be selected for challenging installations

and maximises the drop capacity.

Brackets are available with slim line end

caps which are recommended for all face

fit installations.

OUTER BEAUTY


EDGE Features & Benefits

LIVING WITH INNOVATION

Two compact dual bracket designs are available:

- The standard (under) roll configuration ensures the blind skin

can be fitted close to the window.

- The reverse (over) roll configuration provides a self pelmet

effect. Both dual brackets can be installed with either same

side or opposite end controls and have universal mounting

options.

An optional patented integrated levelling device makes it easy

to adjust shades after mounting.

Two standard linking systems are available:

- The standard connector set minimises the intermediate gap

on linked configurations.

- The optional aligner link maximises flexibility during

installation with a fine adjustment option for aligning the level of

the blinds.

Both linking options have 15 degree play. This provides an

allowance for slightly misaligned installations.

An independent linking option is available for configurations

that require multiple operation.

A 45 and 90 degree linking mechanism is also available for bay

and corner windows.

A sleek (84mm projection) and contemporary head box and

fascia system are available in both an anodised and powder

coated finish (white, black or magnolia) with colour coded

endcaps.

Both the head box and fascia system can be installed in both

reveal and face fit positions and have a snap lock cover and

plastic outlets for easy installation and quiet operation.

To obtain room darkening, the head box system can be

installed with side channels, available in matching powder

coated colours (white, black or magnolia) or anodised finish.

Standard Dual Roller

Linked Blinds

Headbox System


luxaflex.com.au6

SUPERIOR DESIGNIntroducing Luxaflex® Heavy Duty Roller Blinds with patented EDGE technology, a new heavy duty roller blind hardware system developed by Hunter Douglas.

EDGE Heavy Duty

The new modular system is designed to allow for larger blind

widths, featuring a 65 mm tube with the strength to allow for

widths up to 3.8 meters and drops up to 5.5 meters.


Two bracket sizes available – 55mm and 75mm which ensures the correct bracket can be selected to maximise the drop capacity.

The aluminium tube has been engineered to perform well with minimal deflection over large expanses.

Universal bracket system allows for simple installation.

The idle end plug has a 30mm play to provide for incorrect measurements.

Components are available in two colour options: black and white.

Can link up to 3 blinds with 30m2 combined sq area.

Straight linked blinds work smoothly up to an angle of 15 degrees to compensate for installation errors and allows for arches with a

large radius to be installed without a universal joint.

SMOOTH AND LIGHT OPERATION

A range of durable hardware options are now available to span widths up to 3.8m and drops up to 5.5m with smooth and reliable operation

every time. Chain operated rollers are now available with extended limitations to cater for longer drops, while motorisation has flourished

with a wide selection of motor options. Now you can select from the most superior motorised solutions to link blinds up to 30m² or simply

motorise a single heavy duty blind with a simple offordable soloution.

FABRIC RANGE

A range of new fabric options that were never offered before in the heavy duty program are now available, please check the new price list

for more information.

INNER STRENGTH

The system is available with a 50mm or 65mm aluminium tube. Both tubes have been engineered with symmetrical keyways to reduce

deflection over large expanses. Chain operated blinds will be supplied with the 50mm tube while motorised blinds will be supplied with

65mm tube as standard.

EASE OF ASSEMBLY AND INSTALLATION

Ease of assembly and installation has been the main focus point of the new system. Introducing two new heavy duty universal brackets

that can maximise the limitation of the overall blind capacity and ensures the correct selection can be made for challenging installations.

For all face fit installations bracket and screw covers will be supplied as standard.

An Aligner Set is available for linked blinds which will allow fine adjustments to be made to align bottom rails during installation. For

windows that are not square an integrated leveller can be used to adjust the height on the idle end to ensure the lateral opening is parallel.

This is particularly important for linked blinds with long drops.

EDGE Heavy Duty Features & Benefits

8

EDGE Metal Chain Drive

LEADING DESIGN

Introducing the new premium metal chain drive with a unique design statement that will complement the modern home. A highly durable hardware and operating system that allows for high sound absorption whilst delivering smooth and reliable operation.

Award Winning Design – “Furniture and Home Textiles”

product design award at the 2012 iF design awards

ceremony.

Made from ZAMAC (Zinc, Aluminium, Magnesium, Alloy,

Copper) with a high quality finish.

Heavy-duty 1:1 ratio mechanism with a patented technique

providing smooth and easy lift capabilities.

Aluminium designer bracketing system provides unique

aesthetics and strong mounting platform for any home.

The plastic cover is available in Black or Grey.

The stylish designer bracket can also be paired with the

standard chain drive available in both 1:1 and 1.75:1 ratio for

easier raising & lowering of larger blinds.


EDGE Accessories

CHAIN TENSIONER

A new chain tensioner has been designed to complement the current offerings within the EDGE system. Designed in collaboration with

installers to provide an easy installation process and to meet child safety regulations. The chain tensioner comprises of high quality plastic

components to reduce noise generated from the chain without compromising on quality.

A rubber wheel is used to ensure quieter operation and reduce the overall noise generated from the system.

Easy clipping action minimises the use of screws to give a stylish appearance.

Two kit options are available for face fit or reveal fit installation.

Available in four colour options- Black, White, Grey and Magnolia.

The EDGE Technology Hardware System is available with the Ellipse Balance Rail which features a sound proofing bumper and has

been designed with perfect weight distribution in mind to ensure fabrics hang very flat.

The Ellipse Balance Rail is now available in 10 colours, which includes the original Black, White, Magnolia and Anodized.

The new colour options are Gunmetal, Granite, Limestone, Bronze and two exclusive Australian Window Furnishing colours; Dune and

Shoji White.

Four new end caps have been introduced to stylishly

co-ordinate with the Ellipse rail.

The internal design of the Ellipse Balance Rail has been re-engineered to improve the finished blind quality. This reduces fabric

reworks caused by scratching and stretching as the fabric runs through the balance rail during fabrication.

IMPROVED ELLIPSE BALANCE RAIL

Face Reveal

Note: The new chain tensioners will be available from January 2014.

luxaflex.com.au10

EDGE Components and Dimensions

STANDARD ROLLER SYSTEM

COMPONENTS

The Luxaflex Roller Blind Hardware System,

can be operated with either a chain drive

or motor. Each chain operated blind will be

supplied with a plastic chain loop however

metal or stainless steel chains are available

on request.

An Ellipse rail comes standard on all blinds

and is available in either anodised finish or

you can choose from a selection of popular

powder coated colours.

1

4

5

2

3

7

8

86

4

7

System options

14

15

16

20

22

21 27

26

25

174

419

19

18

29

28

Chain Drive and Idle Components

No Code Description

1 24.7125.XXXX* Chain Drive 1:1

1 24.7124.XXXX* Chain Drive 1.75:1

2 24.7127.XXXX* Chain Drive Cover Plate

3 24.7122.XXXX* 31mm Tube Plug

14 24.7300.7060 Metal Chain Drive 1:1

15 24.7308.XXXX# Metal Chain Drive Cover Plate

16 24.7307.XXXX# Metal Chain Drive Tube Plug

4 24.7121.XXXX* 37mm Tube Adapter

19 24.7128.XXXXA* 50mm Tube Adapter

6 24.7120.XXXX* Idle End

Bracket and Tensioner Components

No Code Description

7 24.7100.XXXX* Bracket 38mm

7 24.7102.XXXX* Bracket 55mm

8 24.7110.XXXX* Bracket Cover 38mm

8 24.7114.XXXX* Bracket Cover 55mm

20 24.7106.7060 Chrome Bracket 38mm

20 24.7108.7060 Chrome Bracket 55mm

21 24.7116.XXXX# Chrome Bracket Cover

22 24.7118.XXXX# Chrome Bracket Screw Cover

25 24.7193.XXXXA Levelling Bracket 38mm

25 24.7195.XXXXA Levelling Bracket 55mm

26 24.7190.7060A Chrome Levelling Bracket 38mm

26 24.7192.7060A Chrome Levelling Bracket 55mm

27 24.7196.7060A Integrated Leveller

Not Shown 24.7197.0000A Integrated Leveller Key

Aluminium Tubes and Springs

No Code Description

5 24.7200.0000 37mm Tube

17 24.7002.0000 HD 37mm Tube

18 24.7201.0000 50mm Tube

28 24.7202.XXXX^ 37mm Spring

29 24.7203.XXXX^ 50mm Spring

XXXX = Available in different options* = Available in White (0155,0199), Grey (0952), Black (1858), Magnolia (4459)# = Available in Grey (0952) and Black (1858)^ = Available in Right Hand Control (0000) and Left Hand Control (0001)


18mm 12mm

Cloth Width

Blind Width38mm Bracket Dimensions

55mm Bracket Dimensions



Minimum width single blind 500mm

Minimum width single blind with booster spring 750mm

Minimum width single motorised blind (switch) 650mm

Minimum width single motorised blind (RTS) 690mm

Maximum width single blind Please refer to the pricing guide as this is fabric dependent.

Minimum drop single blind 300mm

Maximum drop single blind Please refer to the pricing guide as this is fabric dependent.


75mm

75mm

NOTE:

Allow an extra 2mm for each end cap.

68mm

86mm

LIMITATIONS

luxaflex.com.au12


COMPONENTS

LINKED ROLLER SYSTEM

Linked Rollers are available with either a straight

connector or an aligner connector. Unless otherwise

nominated the blind will always be supplied with

the straight connector which ensures the light gap

between the linking blinds is minimised (17mm).

The optional aligner connector has been designed

with special patented technology to assist when

installing blinds that may be trickier to line up.

5

8

7

7

31

4

37

3

4

36

4

45

839

2

1

6

XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459).# = Available in Grey (0952) and Black (1858) only.

Linked Blind Components

No Code Description

30 24.7134.XXXXA Connector Set (120mm)

31 24.7133.XXXXA Aligner Set (120mm)

32 24.7138.XXXXA Aligner Set (300mm)

33 24.7135.0000 Independent Link Component

34 24.7130.0000A Uni-Joint Component - 90 degree angle

35 24.7131.0000A Uni-Joint Component - 45 degree angle

36 24.7123.XXXXA Tube Plug Connector

37 24.7111.XXXXA Linked Bracket Cover 38mm

37 24.7115.XXXXA Linked Bracket Cover 55mm

Not Shown 24.7117.XXXX# Linked Chrome Bracket Cover

39 24.7129.XXXXA Idle End (Locking Ring)

System options

33 30 32 34 35



LIGHT GAPS & LIMITATIONS

LINK OPTIONS FIRST LINK 2ND LINK

Straight connector 17mm 22mm

Straight connector w/Spring 22mm 22mm

Aligner Connector 24mm 28mm

Aligner Connector w/Spring 28mm 28mm

Independant Link 24mm 32mm

Independant Link w/Spring 32mm 36mm

Note: Braket cover will increase light gap by 2mm on each end.

LIMITATIONS

Maximum number of linked blinds 3

Note: For Bay windows there is also a 45 and 90 degree angle

linking system. We recommend that the brackets for these blinds are

installed before measuring the opening width for an order.

18mm

See Below

17mm

Tube/Cloth Width

Blind Width Blind Width

System Width

Tube/Cloth Width

* Please refer to table below for light gap variations based on different options.

LINKED ROLLER SYSTEM

luxaflex.com.au14


COMPONENTS

HEADBOX SYSTEM

The contemporary headbox system has been designed

to provide a simple slim line profile whilst at the same time

maximising the drop capacity for your roller. The headbox is

available in both anodised finish or a choice of powder coated

colours (white, black or magnolia).

In situations where you require additional light control a

matching one piece side channel system is available and easy

to install.

955_1.dxf4248

4

6

44

10

11

11

40

43

34

5

41

4248

45

47

44

46

1

9

System options

49 50

XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459). XXX = Available in Clear (155), Black (855), Granite (460), Limestone/Dune (461), Gunmetal (462) Bronze (465).#= Available in ten different colour options.

HEADBOX COMPONENTS

No Code Description

40 24.7209.XXXX H-Box Front Plate

41 24.7208.XXXX H-Box Back Plate

42 24.7212.XXXX H-Box Endcaps Square

43 24.7146.XXXXA Chain Outlet Set

44 24.7207.XXXX Side Channel

45 24.7168.XXXXA Side Channel Top Insert

46 24.7169.XXXXA Side Channel Bottom Set

47 24.7163.0000A Side Channel Fixing Set (Metal)

48 24.7362.1858 H-Box Bracket

Fascia Components

49 24.7008.XXXX Fascia Plate

50 24.7210.XXXX Fascia Bracket

42 24.7212.XXXX H-Box Endcaps Square

48 24.7362.1858 H-Box Bracket

Ellipse Bottom Rail Components

9 32.379.200 Double Sided Bottom Rail Spline

10 24.7218.XXXX# Ellipse Bottom Rail

11 32.455.XXX Bottom Rail End Caps



HEADBOX CAPACITY

37mm Tube (Blind Width < 2600) Fabric Thickness < 0.55mm 3.3m drop

Fabric Thickness < 0.75mm 2.8m drop

50mm Tube (Blind Width > 2600) Fabric Thickness < 0.55mm 2.4m drop

Fabric Thickness < 0.75mm 1.9m drop

LIMITATIONS

21mm

Blind Width

Tube/Cloth Width

15mm

84mm

89m

m

Side Channel Dimensions26

.8m

m

16.8mm

63.5mm

26.8

mm

Headbox Dimensions

HEADBOX SYSTEM

luxaflex.com.au16

51

2

2

51

1

1

4

4

5

5

4

4


DUAL ROLLER SYSTEM

REVERSE BRACKET OPTIONSSTANDARD BRACKET OPTIONS

COMPONENTSTwo Dual Bracket systems are available. The standard roll

bracket has been designed to keep your blind skins as close

to the window as possible, whilst the reverse roll bracket

provides a self pelmet effect and is ideal for use with fabrics

that have a neutral toned backing.

Blinds can be installed using either same side or opposite

end controls.

System options

51 52

Dual Bracket Components

No Code Description

51 24.7363.XXXX Std Roll Dual Bracket

52 24.7364.XXXX Rev Roll Dual Bracket

XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459).



LIMITATIONS

DUAL ROLLER SYSTEM

Minimum width single blind 500mm

Minimum width single blind with booster spring 750mm

Minimum width single motorised blind (Switch) 650mm

Minimum width single motorised blind (RTS) 690mm

Maximum width single blind Please refer to the pricing guide as this is fabric dependent.

Minimum drop single blind 300mm

Maximum drop single blind Please refer to the pricing guide as this is fabric dependent.

Maximum drop dual bracket 3,000mm

NOTE:

Braket cover will increase light gap by 5mm.

18mm

Blind Width

Tube Width

12mm

DUAL ROLLER DIMENSIONS

Reverse Roll Bracket

Standard Roll Bracket

160mm

99mm

92mm

155mm

DUAL ROLLER SYSTEM

luxaflex.com.au18

Drive and Idle Components

No Code Description

53 24.7355.0952A HD Bracket Adapter

54 24.7371.0005A HD Motor Plate

55 24.7378.1858 Motor Adaptor Kit 65mm Hd M50

56 24.7326.0000 65Mm Tube Drive Adaptor

Not Shown 24.7361.0000 65Mm Tube Crown Adaptor

Not Shown 24.7354.0000A Motor Adaptor Kit 65mm Somfy 50

58 24.7311.XXXXA HD 65 Idle End Adjustable

Aluminium Tube & Bracket Components

57 24.7060.0000 65mm TUBE

59 24.7390.1858 HD Bracket 55mm Black

Not Shown 24.7302.1858A HD Bracket 75mm Black

60 24.7304.XXXXA HD Bracket Cover 55mm

Not Shown 24.7306.XXXXA HD Bracket Cover 75Mm Black

61 24.7398.1858A HD Bracket Screw Cover Black

62 24.7344.7060A HD Integrated Leveler

Linked Blind Components

63 24.7323.XXXXA HD Aligner Set

64 24.7316.XXXXA HD Tube Plug Connector

65 24.7305.XXXXA HD Bracket Cover 55mm - Linkd

Not Shown 24.7397.XXXXA HD Bracket Cover 75mm - Linkd

XXXX = Avaliable in White and Black

59

6561

6061

59

58

57

64

6359

58

57

55

5453

60

61

56

COMPONENTS

System options

62


HEAVY DUTY ROLLER SYSTEM

The LUXAFLEX® Heavy Duty Roller

Blind Hardware System can operate

large blinds up to 3800mm in width and

5500mm in drop with a wide selction of

motors.

The heavy duty system is available

in either 55mm or 75mm heavy duty

bracket options.


System Width

Blind Width

90mm

100mm

90mm

120mm

Blind Width

Tube/Cloth Width Tube/Cloth Width



See below 39mm 17mm

MOTOR TYPE LIGHT GAP

HDQ/HDQ65/HDR/HDR65/SR/SS 23mm

SR65/SS65 25mm

Note: Bracket cover will increase light gap by 2mm on each end

LIMITATIONS

Maximum Number of Links 3

Minimum Width Single Blind 1000mm

Maximum Width Single Blind 3800mm

Minimum Drop Single Blind 300mm

Maximum Drop Single Blind 5500mm


HEAVY DUTY ROLLER SYSTEM

LIGHT GAPS & LIMITATIONS

* Please refer to table below for light gap variations based on different options.

luxaflex.com.au20

EDGE Measuring Deductions Guide

To simplify the ordering process all measuring deductions will be made automatically in the factory. All you need to do is enter the size of

the opening you wish your blind to cover on the order form. The exception to this is 90 degree corners and bay windows.

CornersNOTE: FOR WINDOWS IN REVEAL BRACKETS MUST BE CEILING FIXED FOR DEDUCTIONS TO WORK.

FRONT EDGE

ON FACE

BACK EDGE

Bays

ON FACE

TOP FIX FRONT EDGE

TOP FIX BACK EDGE

Angled Linked Blinds - 90° CornersFACE FIT

CEILING FIT FRONT EDGE of REVEAL

Corners in reveal- front edge Deductions

Through Blind +50mm(from corner)

Butt Blind - 0mm

Corners in reveal- back edge Deductions

Through Blind - 0mm

Butt Blind - 60mm (37mm Tube)

- 80mm (50mm Tube)

Corners on face Deductions (butt blinds)

38mm projection bracket - 75mm

55mm projection Bracket - 90mm

Bays in reveal Deductions

Front edge of reveal - 0mm - 0mm - 0mm

Back Edge of reveal - 22mm - 44mm - 22mm

Bays on face Deductions

38mm projection Bracket - 28mm - 56mm - 28mm


Angled Link Bay on Face Deductions



Angled Link bay in reveal Deductions

Front Edge of reveal - 10mm - 20mm - 10mm

*gap between brackets 30mm approximate

Angled Link Corners on Face

Measure blinds into the corner and deduct 76mm from each blind.

Angled Link Corners in Reveal

Measure from the front edge of reveal and deduct 10mm from each

blind.

in all corner linked situations we strongly recommend that the brackets

are fixed in exact location first and then measured outside edge to

outside edge of the bracket to ensure the gap is minimised.

*Gap between brackets 30mm approximate

Angled Linked Blinds - Bay Window

MEASURE WALL Brackets to be fixed to wall

CEILING FIT FRONT EDGEof reveal

FACE FIT

Deductions are only approximate due to thickness of fabric and drop, for best results install the thru blind then measure for the butt blind.


CORNERSNote: For windows in reveal brackets must be ceiling fixed for deductions to work.

FRONT EDGE

ON FACE

BACK EDGE

BAYS

ON FACE

TOP FIX FRONT EDGE

TOP FIX BACK EDGE

Deductions are only approximate due to thickness of fabric and drop, for best results install the thru blind then measure for the butt blind.

WIDTH -0

DROP -0

TO SILL -0

PAST SILL -0

TO FLOOR

-0

WIDTH -0

ARCHITRAVE & REVEAL

OUTSIDE FACE

EDGE Heavy Duty Measuring Deductions Guide

MIN WIDTH +130

90mm

+90

BRACKET HD55 BRACKET HD75

82

65

99

88

03-G015

82

65

119

88

Corners in Reveal- Front Edge DeductionsThrough Blind +70mm(from corner)Butt Blind - 0mm

Corners in Reveal- Back Edge DeductionsThrough Blind - 0mm55mm Butt Blind - 95mm 75mm Butt Blind -110mm

Corners on Face Deductions55mm Butt Blind - 105mm75mm Butt Blind - 130mm

Bays in Reveal Deductions

Front Edge of Reveal 55mm HD Bracket - 0mm - 0mm - 0mm 75mm HD Bracket - 0mm - 0mm - 0mm

Back Edge of reveal 55mm HD Bracket - 35mm - 70mm - 35mm

75mm HD Bracket - 40mm - 80mm - 40mm

Bays on face Deductions55mm HD Bracket - 45mm - 90mm - 45mm75mm HD Bracket - 35mm - 110mm - 55mm

luxaflex.com.au22

EDGE Dimensions

OPERATION TYPE LIMITATIONS (FOR SINGLE BLINDS AND LINKED SYSTEMS)

NOTE:

These charts have been calculated using a 400gsm fabric and bottom rail weight of 350g per metre on a 50mm tube. They are provided

as a recommended guide, for further details please refer to your pricing guide.

TUBE CHART

37mm Tube HD37mm Tube 50mm Tube 65mm Tube Not recommended

Motorised

Not recommended

Chain Drive 1:1 (3kg max)

Chain Drive 1.75:1 & Premium Metal Chain Drive 1:1 (3.7kg max)

Chain Drive 1.75:1 W/spring (4.7kg max)


Luxaflex EDGE Roller Blinds are compatible with all the motorisation options you are most familiar with today.

To order any of the motor options below simply add the ‘order

code’ from the table below in the motorisation column on your

order form.

HDRF MOTORS

HDRF is a wireless motor technology. The range of M40RF motors have an integrated

radio receiver for simple one plug installation. Motors can be configured and operated

from the modern touch sensitive 4 Channel SUITE remote control, or operated from

the motor head for quick setup and operation during installation.

HDRF uses intelligent bidirectional communication between each motor and the

remote control to ensure that operation is always flawless and uninterrupted. HDRF

motors have the ability to simultaneously connect to automation systems or be

controlled via a wall switch, all from the one integrated motor.

MOTORORDER CODE

FEATURESSYSTEM USED

BATTERY 240V SLEV (12V)

EDGE 65

SYSTEM

REMOTE

CONTROL

HDQ65HunterDouglas - M50Q Advanced Automation Motor, bi-directional communication.

EDGE 65

HDR65HunterDouglas - M50RF Superior range, modern sleek Remote Control.

EDGE 65

SR65 Somfy - Atlus 50 RTS motor. EDGE 65

SWITCH

CONTROL

HDS65HunterDouglas - Quiet 4 wire motor for switch or home automation

EDGE 65

SS65Somfy - LT 50 4 wire motor for switch or home automation

EDGE 65

EDGE 50

SYSTEM

REMOTE

CONTROL

HDQHunterDouglas - HDQ Advanced Automation Motor, bi-directional communication.

EDGE 50

HDRHunterDouglas - HDRF Superior range, modern sleek Remote Control.

EDGE 50

SR Somfy - Sonesse RTS motor. EDGE 50

MRMerger - Low Cost remote control solution.

EDGE 50

SWITCH

CONTROL

HDSHunterDouglas - Quiet 4 wire motor for switch or home automation

EDGE 50

SSSomfy - Sonesse 4 wire motor for switch or home automation

EDGE 50

MSMerger - Low Cost 4 wire motor for switch or home automation

EDGE 50

EDGE 37

SYSTEM

REMOTE

CONTROL

SK1 Somfy - Wirefree battery operated. EDGE 37

MR37Merger - Low Cost 12Volt Remote Control

EDGE 37

SWITCH

CONTROLHDS37

HunterDouglas - Premium Super Quiet motor for switch or home automation.

EDGE 37

EDGE Motorisation

luxaflex.com.au24

LUXAFLEX® Fabric Collection

The beautiful Luxaflex Fabric Collection provides you with the ultimate colours and styles from plain to textured weaves, in a range of opacities from light filtering to blockout.

Luxaflex Fabrics are designed to suit your light, glare, heat

and privacy needs, with a range of low VOC (Volatile Organic

Compound) fabrics for those sensitive to the smell of fabrics. Many

fabrics are Sanitized treated - for optimal hygiene and treated with

DURAGUARD® Fabric Protector which effectively repels most stain

causing agents.

With over 400 fabrics to choose from, choosing the fabric for

the Edge roller blind is the determining factor on whether the

blinds blends perfectly with the interior space or stands out as a

prominent feature.


LUXAFLEX® Fabric Collection

EASY TO CLEAN AND MAINTAIN

Many Luxaflex Fabrics are treated with DURAGUARD® Fabric

Protector, which effectively repels most stain causing agents

with its proven, water based, preventative formula. Your Luxaflex

Window Fashions will

Resist water stains from rain, moisture and

condensation on windows

Resist oily stains from spills or fingerprints

FOR FRESHNESS & WELL BEING IN YOUR HOME

Many Luxaflex Fabrics are treated with Sanitized®

hygiene function, which

Keeps odours away ensuring freshness in your home

Stops mildew and fungi growing on your window

coverings keeping your home clean

Protects against the development of bacteria ensuring

well-being in your home

The Sanitized® Antimicrobial Protection is free of

harmful substances and is recommended by institutions

for allergy sufferers

SUNSCREEN

Sunscreen fabrics allow for heat and light control whilst

maintaining your view. Perfect for reducing glare and heat in a

room exposed to the sun. Layer with blockout fabrics for night

time privacy.

SHEER

Sheer fabrics give daytime privacy and some filtered

view-through subject to the texture and weave.

Layer with blockout fabrics to give night time privacy.

TRANSLUCENT

Translucent fabrics screen out harsh light, but do not allow a

view-through. They bring texture or patterns to light coming

into a room whilst providing daytime and night time privacy.

BLOCKOUT

Blockout fabrics offer the ultimate level of privacy, day and

night whilst helping to insulate the room. Blockout fabrics offer

room darkening capabilities. Ideal for bedrooms and home

theatre / TV rooms.

luxaflex.com.au26

EDGE Product Installation

a

c

b

d1

1. Fix bracket using the screws of your choice 2. Place the chain drive in the bracket (1)

2click

3. Slide it down until it clicks (2). 4. Place the tube adapter on the chain drive. Press the idle

end and lift the blind.

click

5. Snap it to the bracket. Slide the end caps onto the

brackets.

INSTALLATION - STANDARD ROLLER SYSTEM


1. Make sure that the opening for the Allen key is pointing

downwards before installing the brackets. Change the

orientation by loosening the 2 screws and turning the

leveller 90°. Fix the screws.

2. To adjust skewing, put the provided Allen key into the

screw of the leveller and turn it left or right to move the

blind up or down.

INSTALLATION - STANDARD ROLLER WITH OPTIONAL LEVELLER


21

1. Slide a screw driver between idle end and the bracket

and then lever the idle end out of bracket while holding

blind.

2. Move the blind down and out of the bracket. Blind will

disengage from chain drive.

3. In face push the pin of the chain drive and take the

chain drive out of the bracket.

OR In reveal place a screw driver under the pin of the chain

drive and pull it outwards. Take the chain drive out of the

bracket.

REMOVAL - STANDARD ROLLER SYSTEM

luxaflex.com.au28


3. Slide linked bracket cover over bracket. Slide the

connector part through the bracket into the idle end.

4. Place the tube adaptor on the aligner or connector head.

2

1

click

2 1

3

5. Press the spring loaded idle with locking ring end and lift

the blind and snap it to the bracket.

6. To align the bottom rails, push the blind against the idle end

(1), turn the blind, level the bottom rail with the other one (2).

Release to fix the position (3).

NOTE: This is not possible when using the standard straight

connector set.

7. Secure the blind by turning the locking ring on the idle

end to prevent it from contracting. Slide the end caps onto

the brackets.

1. Unfasten the locking ring. Slide a screw driver between

locking ring and bracket then push the idle end in the

aligner direction.

2. Move the blind down and out of the bracket. Pull the aligner

or connector out of the idle end.

REMOVAL - LINKED BLINDS

1. Place the tube adaptor on the chain drive head. Press

the idle end and lift the blind.

2. Fix the outer bracket with the screws provided.

INSTALLATION - LINKED BLINDS



1. Install the main blind with the linked end cap. 2. Slide the 45º - 90º joint through the bracket into the idle

end.

X

3. Place the inner bracket with the linked end cap

horizontally to the bracket of the main blind and fix it with the

screws provided.

4. The maximum distance between bracket and cardan

joint is X = 40 mm.

5. Fix the outer bracket with the screws provided. 6. Slide the idle end onto the hexagon of the 45º - 90º joint.

NOTE: Level the bottom rail with the other before

installation.

21

click

7. Slide the idle end onto the hexagon of the 45º - 90º joint.

NOTE: Level the bottom rail with the other before installation.

8. Fix the blind by turning the locking ring (on both sides)

against the idle end. Slide the end cap onto the bracket.

> 45°

9. Loosen the screw from the stopper (90º joint). The angle

between the hexagon and the cardan should not exceed

45º. The axes of the blinds should cross in the middle of the

cardan. Fix both stoppers when using 90º joint.

INSTALLATION - UNI JOINT BLINDS

luxaflex.com.au30


1. Fix headbox back plate to wall by drilling through extrusion

and slide brackets into keyway.

2. Slide end caps into the headbox back plate.

3. Clip headbox front plate inside keyway at the top of the

back plate. NOTE: End cap removed for demonstration only.

4. Clip headbox front plate into place to secure the endcaps.

X = max. 500 mm

1. Level the side guiding channel flush with the headbox end

cap. Mark this position.

2. Fix the lower clip - and clips at 500 mm intervals - before

installing the channel.

click

3. Place the bottom rail into the side guiding channel. 4. Snap channel into clips. In reveal installations screw

straight through the side channel.

INSTALLATION - HEADBOX SYSTEM

INSTALLATION - SIDE CHANNELS ON FACE


a

c

b

click

1. Fix the bracket with the screws provided

a) recess b) ceiling c) wall

2. Slide the cover cap onto the bracket until it snaps. The fasteners of

the bracket ring must be open.

21

12

click

3. Place the blind with the bearing onto the bracket. Push the blind

against the bearing and lift the blind up until the motor front plate

fits the bracket ring.

4. Turn the blind (10°) in the rolling off direction and close both

fasteners of the bracket ring. Make sure that limit switches are

accessible.

click

5. Fix the blind by turning the locking ring against the bearing. 6. Slide the end caps onto the brackets. Make sure that the end caps

snap onto the brackets.

INSTRUCTIO

7. Connect the motor and controls in accordance with separately

provided instructions.

INSTALLATION - HEAVY DUTY ROLLER BLIND SYSTEM


luxaflex.com.au32


1. Disconnect the motor. Lift the backside of the end cap and slide it towards you.

2. Unfasten the locking ring.

REMOVAL - HEAVY DUTY ROLLER BLIND SYSTEM

1

2 2 1

3. Open both fasteners of the bracket ring.

4. Turn the blind in the roll up direction until the front plate gets out of the bracket ring.

5. Push the blind against the bearing and slide it out of the bracket.

1. Change the orientation to ensure that the opening for the Allen key is pointing downwards before installing the brackets.

2. Fix the leveller with the screws provided.

3. To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand.

INSTALLATION - HEAVY DUTY LEVELLER



1. Install the main blind with the coupling end cap. 2. Fix the outer bracket with the screws provided. Slide the cover cap onto the bracket until it snaps.

INSTALLATION - HEAVY DUTY LINKED BLINDS

3. Slide the aligner or the connector through the bracket into the idle end.

4. Only for coupling with 2 intermediate brackets! Fix the inner bracket with the screws provided. Slide the aligner through the bracket into the bearing.

5. Place the tube adapter on the aligner or connector head.

6. Press the bearing, lift the blind and snap it to the bracket. 7. To align the bottom rails:(1) push the blind against the bearing. (2) turn the blind, level the bottom rail with

the other one.(3) release to fix the position.

click

9. Fix the blind by turning the locking ring against the bearing.

10. Slide the end cap onto the bracket. Make sure that the end cap snap onto the bracket.

luxaflex.com.au34


1. Lift the backside of the end cap and slide it in your direction.

2. Unfasten the locking ring. Slide a screw driver between locking ring and bracket and push the bearing in the aligner direction.

3. Move the blind downwards out of the bracket. Pull the aligner or connector out of the bearing.

REMOVAL - HEAVY DUTY LINKED BLINDS

Sanitized® and the Sanitized® symbol are trademarks of Sanitized AG, Switzerland, registered in numerous countries.

© Copyright 2013 Hunter Douglas Limited [ABN 98 009 675 709] ® Registered Trade Marks of Hunter Douglas Limited

Somfy is a registered trade mark of SOMFY Pty Limited 10/2013

5YEAR WARRANTY

*Refer to www.luxaflex.com.au for warranty document.

SMARTER BY DESIGN

Documents

LUXAFLEX ROLLER BLINDS WITH PATENTED Edge TECHNOLOGY · between the linking blinds is minimised (17mm). The optional aligner connector has been designed with special patented technology