Lutron | Drapery Track Systemhorizonyc.com/pdfs/products/catalog/Sivoia-QED-Drapery-Chassis... · Lutron ® Drapery Track System Chassis Specification ... Recessed mount bracket 3

Specif icat ion Submittal page 1

Job Name:

Job Number:

Model Numbers:

Lutron® Drapery Track System Chassis Specification

086-123 1 06.11.10

Lutron | Drapery Track System

The Lutron drapery track utilizes the ultra-quiet, precision controlled Electronic Drive Unit. It controls the movement of the drape, adjusting it to the user’s desired positions.

Features• Smooth, ultra-quiet operation• Draperies start, move, and stop with precision• Offers programmable presets• Single, dual, curved, single-tandem and

dual-tandem tracks available• Easy-to-read and easy-to-use controls• Optional infrared system with QED, QS and

Stanza™ systems provide easy, convenient control from anywhere in the room

• Wireless control available with QS Wireless system• Available in right, left, and center draw

configurations• Does not require group controllers or relay

systems to create drapery groups and sub-groups• Can be installed in new construction or

retrofit application• Power failure memory for the lifetime of

the product • Operates up to 175 lb (79.4 kg) draperies• Manual open feature option available• Track splicing option available with up to

two splices per track• Available in pinch pleat and ripplefold pleat styles• 8 year limited warranty

Lutron Drapery Drive Unit

Lutron Drapery Track System


Job Name:

Job Number:

Model Numbers:


086-123 2 06.11.10

Drive Belt

Idler Gear Housing

Cover

Track

Optional manual open master carrier available

Lutron Drapery Drive

Auxiliary CarriersStandardMaster Carrier

Optional Splicing BarSystem components

Standard one way draw master carrier

Drive end snap bracket

Idler end snap bracket Drive end snap bracket

One Way Draw Ripplefold Components

Center Draw Ripplefold ComponentsStandard center draw master carriers

Optional manual open center draw master carriers available

Optional manual open one way draw master carrier available


Job Name:

Job Number:

Model Numbers:


086-123 3 06.11.10

Straight drapery track options

Center-draw, left or right drive

Left draw, left drive

Right draw, right drive

Tandem draw, left and right drives (operates as a center draw drapery)

NOTEValance and drapery not included


Job Name:

Job Number:

Model Numbers:


086-123 4 06.11.10

Standard Curved Drapery track options

Right draw, right drive, inside curve

Left draw, left drive, inside curve

Left draw, left drive, outside curve

Right draw, right drive, outside curve

Min Drive Leg Length (D) – 22 in (581 mm)Min Idler Leg Length (B) – 23 in (587mm)One leg can be up to 72 in (1829 mm) while the other leg can be up to 144 in (3658 mm) (Drive can be located on either leg) for a total track length of 216 in (5487 mm)

B

D

D

B

D

B

B

D

87

81


Job Name:

Job Number:

Model Numbers:


086-123 5 06.11.10

Standard Curved Drapery track options (continued)

Center draw, right drive, inside curve

Center draw, left drive, outside curve

Center draw, right drive, outside curve

Center draw, left drive, inside curve

B

D

D

B

D

B

B

D


Job Name:

Job Number:

Model Numbers:


086-123 6 06.11.10

Center draw, tandem (right and left drive), inside curve

Center draw, tandem (right and left drive), outside curve

Standard Curved Drapery track options (continued)

B

D D

B

DD

Note: Dimension B and D do not include any wall offsets. When providing dimensions B and D, account for the wall offset to ensure the drapery track will fit properly in the desired location. The factory DOES NOT take any deductions from the provided dimensions. Refer to page 8 for recommended minimum offsets.


Job Name:

Job Number:

Model Numbers:


086-123 7 06.11.10

System dimensions

Top view (single track, right draw)

2.1 in (52.1 mm)1.3 in (31.8 mm)1.6 in (41.3 mm)

Track width 18 ft (5.5 m) max without splice Up to 30 ft (9.1 m) with splice (2 splice max)

3.3 in (83.82 mm)

10.6 in (270 mm)

Front view (single track, right draw)

8.89 in (225.6 mm)

3.3 in (83.8 mm)

2.1 in (52.3 mm)

Electronic Drive Unit1.9 lbs (0.9 kg)


Job Name:

Job Number:

Model Numbers:


086-123 8 06.11.10

Corner applicationLutron drapery tracks can be used in corner applications.

Dual drapery track systemLutron® drapery tracks can be used for a combination sheer/blackout treatment.

Single, tandem drapery track systemThe accuracy of movement and speed control of the Lutron drapery track system allows two independent systems to be used to create a center draw drape.

(wall mount shown)

(wall mount shown)

(wall mount shown)

Dimensions*

11.25 in (286 mm)

3.5 in (89 mm)

2.5 in (64 mm)

1 in (25 mm)

Dimensions*

11.25 in (286 mm)

3.5 in (89 mm)

2.5 in (64 mm)

1 in (25 mm)

5.5 in (140 mm)

Dimensions*

11.25 in (286 mm)

3.5 in (76 mm)

2.5 in (64 mm)

1 in (25 mm)

Dimensions*

11.25 in (286 mm)

3.5 in (76 mm)

2.5 in (64 mm)

Single drapery track systemMaintain enough clearance between the drapery track and the inside face of the top treatment or ceiling recess to allow the fabric to move freely.


Job Name:

Job Number:

Model Numbers:


086-123 9 06.11.10

Ceiling bracket cam lock

Bracket optionsLutron drapery track is available in either wall mount or ceiling mount.

1.3 in(31.8 mm)

1.2 in(31 mm)

Ceiling mount bracket exploded

top view of clip arm extended in unlocked position

1.3 in(33 mm)

track

unlockedclosing direction

Ceiling mount application

Pocket mount application

Wall-mount bracket Wall mount application

Pocket mount application

1.3 in(31.8 mm)

1.2 in(31 mm)


Job Name:

Job Number:

Model Numbers:


086-123 10 06.11.10

Wall mount bracket

Minimum extension

6.6 in (170.2 mm)

1.7 in(43 mm)1.2 in

(31 mm)2.7 in(70 mm)

6 in (152.4 mm)

4.1 in (108 mm)

1.7 in(43 mm)1.2 in

(31 mm)2.7 in(70 mm)

3.5 in(89 mm)

Maximum extension


Job Name:

Job Number:

Model Numbers:


086-123 11 06.11.10

Dual wall mount bracket

Minimum extension9.6 in (248 mm)

Maximum extension

1.7 in(43 mm)

1.7 in(43 mm)1.2 in

(31 mm)

3.5 in (89 mm)4.6 in(117.5 mm)

9 in (229 mm)

12.1 in (311.2 mm)

6 in (152.4 mm)

11.5 in (292.1 mm)

4.6 in(117.5 mm)

1.2 in(31 mm)


Job Name:

Job Number:

Model Numbers:


086-123 12 06.11.10

1½ inch Wood Screw

Structural Member

Recessed Pocket

Recessed Mounting Bracket

Drapery Track

1 inch (33 mm)

Minimum Pocket Width

* 1 inch (27 mm)Pocket Depth

Recessed mount bracket

3 inch Drywall Anchor Screw

Drywall Anchor

Recessed Pocket

Recessed Mounting Bracket

Drapery Track

1 inch (33 mm)

Minimum Pocket Width

* 1 inch (27 mm)Pocket Depth

½ inch (13 mm) hole

Mounting with drywall anchor

The track is predrilled with mounting holes for use with either mounting type. The holes are spaced as indicated below.

Mounting with wood screw

Drywall

* 1 inch depth provides complete concealment of the track while maintaining proper clearance for the drapery.

165

165

161

161

161


Job Name:

Job Number:

Model Numbers:


086-123 13 06.11.10

Splice (optional)Track available with up to 2 splices

Splicing Bar

Track splicing is available as an option with all straight Lutron drapery track systems

Track with 1 spliceMinimum Length: 6 ft (1829 mm)Maximum Length: 30 ft (9144 mm)Track provided in 2 equal sections

Track with 2 splicesMinimum Length: 12 ft (3658 mm)Maximum Length: 30 ft (9144 mm)Track provided in 3 equal sections

Note:To maximize durability while minimizing carrier noise: Left and Right Drawsystems with one and two splices, and Center Draw systems with twosplices, utilize carriers with plastic wheels. All other configurations utilizecarriers with rubber wheels.


Job Name:

Job Number:

Model Numbers:


086-123 14 06.11.10

Return size minimum4.68 in (119 mm) minimum for wall mount bracket

9.68 in (246 mm) minimum for dual mount bracket

Drapery fabric return

Drapery fabric

Pinch pleat | Drapery hook settingDrapes are typically sized so the bottom of the drapery track is located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate the specific drapery size and application. Lutron recommends a drapery hook setting of 1/2 in (13 mm) from the top of the drape to the top of the hook (hooks not included). This locates the drapes just below the track and prevents it from rubbing on the track. It is recommended that a distance of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.

1/2 in (13 mm)

Top of drapery panel

Floor

4 in (100 mm)

Top of window

Bottom of drapery track

5/8 in(16 mm)

1/2-1 in (13-25 mm)

Bottom of drapery panel

Drapery panel height +5/8- 1 1/8 in (16-29 mm)


Job Name:

Job Number:

Model Numbers:


086-123 15 06.11.10

NOTES • Drapery track

system compatible with Graber ripplefold snap tape

• Tracks available in 3 fullness factors: 80%, 100%, 120%

Idler end snap bracket Center DrawMaster Carrier

Auxiliary Snap locations


Center draw

Auxiliary Snap locations


One-way draw

One way draw master carrier

Top of snap tape and drapery panel

Floor

4 in (101 mm)

Drapery panel height +3/4-1 1/4 in (19-32 mm)

Top of window

1/2-1 in(13-25 mm) Minimum

Bottom of drapery panel

Ripplefold | Drapery tape assemblyThe bottom of the drapery track is to be mounted such that it is located a distance of 1/2 in (13 mm) + drapery panel height from the floor. Drapes are typically sized so the bottom of the drapery track and top of the drapery panel are located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate the specific drapery panel height and application. It is recommended that a space of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.

Drive-end snap bracketIdler end snap bracket

Center draw master carriers (Center-draw tracks only)

Snap tape

Drapery panel

1/2 in(13 mm)

3/4 in(19 mm)


Job Name:

Job Number:

Model Numbers:


086-123 16 06.11.10

Snap Tape

Drapery Panel

Snap Tape

Drapery Panel

Snap Tape

Drapery Panel

Ripplefold | Drapery tape assembly (continued)The Ripplefold drapery snap tape is attached to the top of the drapery panel by the drapery manufacturer. The number of snaps required is based on the Track Width, Draw Type and Fullness of the drapery. Refer to the Shade Configuration Tool (SCT) for the number of snaps required per panel for the given specifications. Left draw and Right draw configurations require one drapery panel. Center draw and Tandem draw configurations require two drapery panels. The Lutron Ripplefold drapery system is compatible with Graber snap tape, which has a spacing of 4 1/4 in (108 mm) between snaps. The Buttmaster Carriers and the End Snap Brackets, require the outermost snap on both ends of the snap tape to be spaced 1 in (25 mm) from the adjacent snaps.

Left Draw and Right Draw ConfigurationsNumber of Panels — 1Snap Tape Type — GraberInner Snap Spacing — 4 1/4 in (108 mm) typicalEnd Snap Spacing — 1 in (25 mm) Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness. Refer to Shade Configuration Tool (SCT) for exact snap quantity.

Center Draw and Tandem Draw ConfigurationsNumber of Panels — 2Snap Tape Type — GraberInner Snap Spacing — 4 1/4 in (108 mm) typicalEnd Snap Spacing — 1 in (25 mm) Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness. Refer to Shade Configuration Tool (SCT) for exact snap quantity.

Varies based on return distance

1 in (25 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

1 in (25 mm)



1 in (25 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

1 in (25 mm)


1 in (25 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

4 1/4 in(108 mm)

1 in (25 mm)


1 in (25 mm)typ

1 in (25 mm)typ


Job Name:

Job Number:

Model Numbers:


086-123 17 06.11.10

Ripplefold | Manual open stackback characteristicsNote: Ripplefold drapery tracks with manual open feature will have two fixed ripplefold pleats at the master carrier that do not compress when the drapery opens. This will result in approximately 3 in (76 mm) more stackback per fabric panel than a standard ripplefold drapery panel.

2 fixed ripplefold pleats

3 in (76 mm) additional stackback with manual open master carrier

Standard ripplefolddrapery stackback

Documents

Lutron | Drapery Track Systemhorizonyc.com/pdfs/products/catalog/Sivoia-QED-Drapery-Chassis... · Lutron ® Drapery Track System Chassis Specification ... Recessed mount bracket 3