Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
With Complements
We are pleased to enclose the following equipment details that GlobalBound offers - whatever your needs, we have the answers:
• Centralized Lubrication Equipment
• Minimal Lubrication Systems
• Single Point Grease Lubricators
• Drum Pumps and Transfer Pumps
• Hydraulic and Lubrication Fittings
• Preventative Maintenance Practices
• Lubrication Management Programs
1405 D Babbage Lane • Indian Trail, NC 2807 • Phone 704-684-0101 • Fax 704-684-0102 • www.globalboundind.com© 2016 - All rights reserved.
1405 D Babbage LaneIndian Trail, NC 28079Phone 704-684-0101
Fax 704-684-0102www.globalboundind.com
© 2012. All rights reserved.
Lubricator SystemsReplacement Parts
Your single source for automatic lubricationsystem component parts
DistributionTubing & Fittings
Adapters& Connectors
Junctions& Gauges
Lubricator SystemsReplacement Parts
Your LubricationResource
Lubricator SystemsCyclic Operation LubricatorsSingle Feed Line Resistance
Manual PumpModel CKE(right type)
1 to 8cc adjustabledischarge output
When ordering, specify:Left or Right Hand Operation1 liter or 2 liter reservoir
4 or 6mm diameter discharge bore tubing
Automatic Cyclic OperationPiston Pump
Model CES (timing motor)
1 to 6cc adjustable discharge output2 liter reservoir capacity with float switch
When ordering, specify:Motor voltage: 110 or 220V
Cyclic interval time: 2, 3, 5, 10, 15, 30 and 60 minutesStroke setting: 1 to 6cc discharge per cycle
Pneumatic LubricatorModel PNA
1 to 8cc adjustable discharge output
When ordering, specify:2, 4, or 8 liter (metal) reservoir
4 or 6 mm diameter discharge bore tubingWith or without pressure gauge
Programmable LubricatorModel CESP
Adjustable "ON" time: 2, 3, 5, 10, 15, 20, 25 & 30 sec.Adjustable "OFF" time: 3, 5,10, 15, 20 30, 60 & 180 min.
When ordering, specify:2, 4, or 8 liter (metal) reservoir
4 or 6 mm diameter discharge bore tubingWith or without pressure gauge
For additional technical specifications, download LUBEIT Booklet. Lubricators ISO 9001 and CE Certified
Lubricator SystemsReplacement Parts
Lubricator SystemsTubing
GlobalBound Industries, LLC stocks Manual and Automatic Lubrication Pumps,as well as Centralized Lubrication Products at competitive prices. Componentsillustrated represent a sample of products offered.
Lubrication Tubing Replacement Part Numbers and Descriptions
CompressionTubing SleeveC-4 Copper tubing, 4mm OD PB-4 4mm OD tubing, metalC-6 Copper tubing, 6mm OD PB-6 6mm OD tubing, metal
N-4 Nylon tubing, 4mm OD PB-104 4mm OD tubing, nylonN-6 Nylon tubing, 6mm OD PB-106 6mm OD tubing, nylon
Compression CompressionBushing NutPA-4 Tubing, 4mm OD PR-08 4mm ODPA-6 Tubing, 6mm OD
Tubing Connector InsertClips (Nylon tubing only)PZ-110407 Single tubing, 4mm OD PO-4 4mm OD tubing, nylonPZ-120410 Double tubing, 4mm OD PO-6 6mm PD tubing, nylon
Nylon TubingSpringSG-4450 Spring protector, 4mm OD tubeSG-6450 Spring protector, 6mm OD tube
Note: 8, 10 and 12 mm outside diameter tubing is available in copper and nylon alongwith all corresponding tubing fittings.
Contact us with your inquiries, includingautomatic lubrication engineering supportquestions — we are always on hand tooffer assitance.
Your LubricationResource
Lubricator SystemsReplacement Parts
Lubricator SystemsJunctions and Distributors
2-Way JunctionModel Bore Interthread Weight (g)JD-4 Ø4 M8xP1.0 27JD-6 Ø6 M10xP1.0 23
3-Way JunctionInter-
Model Bore A B C D F thread Weight (g)PKD-4 Ø4 29 19.5 8.5 12 Ø6.2 M8xP1.0 16
4-Way JunctionInter-
Model Bore A B C F thread Weight (g)PJD-4 Ø4 30 8 11 Ø5.3 M8xP1.0 23
A Type Single Side Outlets DistributorOutlet Inlet Outlet A B Inlet BoreØ4 Inlet BoreØ6
Model No. Bore Bore (mm) (mm) Weight (g) Weight (g)
A-4 3 Ø4 49 35 70 68
A-5 4 Ø4 65 51 86 83
A-6 5 Ø4 82 68 110 108
A Type Double Side Outlets DistributorOutlet Inlet Outlet A B Inlet BoreØ4 Inlet BoreØ6
Model No. Bore Bore (mm) (mm) Weight (g) Weight (g)
AE-4 5 Ø4 48 35 73 71
AE-6 7 Ø4 65 51 103 101
AE-8 9 Ø4 83 70 128 124
StandardØ4
Ø6Optional
StandardØ4
Ø6Optional
Note: Closure Plug for Junction/Distributor Outlets PG-004
Metric FittingsAvailable
Lubricator SystemsReplacement Parts
Lubricator SystemsOil Proportion
Adapter Meter Units
Straight Connector Oil Flow RatePTT-1 SlowPTT-2 Medium SlowPTT-3 MediumPTT-4 Medium FastPTT-5 Fast
Straight Adapter Oil Flow RateCPT-1 SlowCPT-2 Medium SlowCPT-3 MediumCPT-4 Medium FastCPT-5 Fast
Junction Mounted Oil Flow RateCPV-1 SlowCPV-2 Medium SlowCPV-3 MediumCPV-4 Medium FastCPV-5 Fast
Note:Each oil flow rate increase doubles the oil delivery
Your LubricationResource
Inter- Outer- WeightModel Bore d L H thread thread (g)
PD-401 Ø4 Ø3 18 10 M8xP1.0 PT1/8 8
PD-402 Ø4 Ø3 18 14 M8xP1.0 PT1/4 17
PD-601 Ø6 Ø4 18 12 M10xP1.0 PT1/8 8
PD-602 Ø6 Ø5 18 14 M10xP1.0 PT1/4 14
Lubricator SystemsReplacement Parts
Lubricator SystemsDistribution Line FittingsStraight Connector, ExternalModel DxT Material H L Weight (g)CN-101 PT1/8xPT1/8 Brass 10 21 6CN-102 PT1/4xPT1/4 Brass 14 25 12
Elbow AdapterInter- Outer- Weight
Model A B thread thread H (g)PI-401 12.7 21 M8xP1.0 PT1/8 12.7 13PI-601 12.7 21 M10xP1.0 PT1/8 12.7 13PI-402 12.4 23 M8xP1.0 PT1/4 12.4 22
Straight Adapter
Inter- Outer- WeightModel Bore d L H thread thread (g)
PD-4011 Ø4 Ø4.9 25 10 M8xP1.0 PT1/8 11
PD-6011 Ø6 Ø4.9 26 12 M10xP1.0 PT1/8 14
One-Way Straight Adapter
Model Bore A B H W T T1PM-104 Ø4 28 23 14 5 M8xP1.0 M12xP1.0PM-106 Ø6 27 22 16 5 M10xP1.0 M14xP10.
Bulkhead Fitting Connector
Supplied with compression bushing and sleeve
Metric FittingsAvailable
Metric FittingsAvailable
Inter- Outer- WeightModel Bore d A B H thread thread (g)
PH-400 Ø4 Ø3 18 18 10 M8xP1.0 Ø5.8 - Ø6.2 13
PH-401 Ø4 Ø4 18 18 10 M8xP1.0 PT1/8 13
PH-601 Ø6 Ø3 20 20 12 M10xP1.0 PT1/8 20
PH-602 Ø6 Ø5 20 21 14 M10xP1.0 PT1/4 29
Lubricator SystemsReplacement Parts
Lubricator SystemsDistribution Line Fittings
Elbow Adapter
Elbow Connector Header TypeInter- Inter-
Model Bore d A B thread1 thread2 HFEA-404 Ø4 Ø3 18 18 M8xP1.0 M8xP1.0 10
3-Way Connector HeaderInter- Weight
Model thread A B C (g)PKD-01 PT1/8 26 20 14 34PKD-02 PT1/4 30 24 18 47
Swivel AdapterModel Interthread Outerthread Weight (g)SS-101 PT1/8 PT1/8 26SS-401 PT1/8 M8xP1.0 28
Swivel Elbow AdapterModel Interthread Outerthread Weight (g)ES-401 M8xP1.0 PT1/8 38ES-601 M10xP1.0 PT1/8 38
Lubricator SystemsReplacement Parts
Lubricator SystemsMiscellaneous Lubrication
Equipment PartsHorizontal Pressure Gauge
Specif- L W Weight GaugeModel ication (mm) (mm) Size (g) InsideM06001 7kgf/cm3 42.1 24.6 1.5” 58 Dry
Vertical Pressure GaugeSpecif- L W H Weight Gauge
Model ication (mm) (mm) (mm) Size (g) InsideM06010 35kgf/cm3 43 24 58 1.5” 56 Dry
Line Oil FiltersSpecif- Max Weight
Model ication A B C Pressure Mesh (g)A-101-1 PT1/8xPT1/8 105 85 52 10kgf/cm2 40 260A-101-3 PT1/8xPT1/8 115 85 52 30kgf/cm2 40 440
BrushModel Interthread Weight (g)
M25006S M10xP1.0 Ø6 21.5(with Ø6 Compression Sleeve and Brushing)
Flexible HoseOrder Pipe Max SuitableCode Diameter Length Pressure LubricationPPST00 Ø4 - Ø6 100mm~9000mm 40kg/cm2 Oil
Metric FittingsAvailable
Information on other replacement parts available upon request.Download the Lubeit booklet for product details.
GlobalBound Industries, LLC provides Industrial Safety Products and Servicesfor machinery and general services to achieve peak operating efficiencies.
Principal products include Lubrication Equipment and Vehicle Safety Systems.
Major areas of interest are Automatic Centralized Lubrication Equipmentand Vehicle Wheel Nut Security Monitoring Systems.
The Company is headquartered in Charlotte NC area with industrial distributors in Eastern, Mid-West and Western United States.
Company Principal:Mr. Syd Gallimore, President
Mr Gallimore is a qualified lubrication engineer with over 30 years inindustry specializing in Predictive Maintenance technology for all types ofindustrial machinery with special emphasis on the transportation industry anda particular focus on preventative practices and issues concerning highway safety.
A member of the Society of Operational Engineers and Road Transport Engineers,Syd has in-depth knowledge on tribology on stationary and moving machinery with special emphasis on the design and development of centralized lubrication equipment.
Syd is a resident of the Charlotte, NC area.
GlobalBound Industries, Inc.About the Company