LUBRICANTS Lubricants for Power Generationressources.total.com/websites/total_co_za/Lubricants-for...BILD long-lastin relationships FACIITATE access to ergy 8 Become THE partner of

Lubricants for Power Generation

LUBRICANTS

Table of ContentsTOTAL IN THE WORLD 4

TOTAL IN AFRICA 6

POWER PRODUCTION OFFER 10

TOTAL RUBIA WORKS RANGE 12

ISOVOLTINE RANGE 13

CARTER WT 320 14

PRESLIA RANGE 15

NATERIA RANGE 16

AURELIA TI RANGE 17

SERVICES OFFER 18

COOLANTS 20

PRODUCTS CATALOG 22

*IEA : International Energy Agency

Today, according the IEA*, nearly 600 million people are deprived of electricity in Sub-Saharan Africa making energy access a priority, as the continent cannot develop without access to electricity.The continent’s demographic growth means that demand for energy will continue to grow. To meet this demand, overall generation capacity must increase by a factor of four in the years to 2040.In this context, as a major player in the energy market in Africa, Total has developed a lubricant product and service offer for the energy production and transportation sectors.

I invite you to find out more in this brochure designed by the Total Lubricants teams for which commitment, customer proximity and innovation are daily concerns.

Mathieu SoulasTotal Lubricants Director

“

”

LUBRICANTS

Table of ContentsTOTAL IN THE WORLD 4

TOTAL IN AFRICA 6

POWER PRODUCTION OFFER 10

TOTAL RUBIA WORKS RANGE 12

ISOVOLTINE RANGE 13

CARTER WT 320 14

PRESLIA RANGE 15

NATERIA RANGE 16

AURELIA TI RANGE 17

SERVICES OFFER 18

COOLANTS 20

PRODUCTS CATALOG 22

*IEA : International Energy Agency

Today, according the IEA*, nearly 600 million people are deprived of electricity in Sub-Saharan Africa making energy access a priority, as the continent cannot develop without access to electricity.The continent’s demographic growth means that demand for energy will continue to grow. To meet this demand, overall generation capacity must increase by a factor of four in the years to 2040.In this context, as a major player in the energy market in Africa, Total has developed a lubricant product and service offer for the energy production and transportation sectors.

I invite you to find out more in this brochure designed by the Total Lubricants teams for which commitment, customer proximity and innovation are daily concerns.

Mathieu SoulasTotal Lubricants Director

“

”

LUBRICANTS

Total in the world

No.4

SOLAR

OUR ACTIVITIES

+ 800

+ 4million

+1 BILLION $

INTERNATIONAL OIL & GAS COMPANY

MAJOR INTEGRATED

PLAYER WITH SUNPOWER

& TOTAL SOLAR

INDUSTRIAL SITES

CLIENTS PER DAY in Total stations across the globe

ALLOCATED TO R&D

Staying one step ahead of your performance

Total is a leading international oil company.

As a major player in gas, refining and petrochemicals, Total distributes a comprehensive range of oil products including lubricants.

The Lubricants business employs 5,800 of the 98,000 collaborators working for Total.

Designed for professionals and the general public, the products and services are used in three main sectors: Automotive, Industry and Marine.

As an integrated player, Total manages the entire supply chain from design to distribution. With extensive expertise in product research and development, the company drives every step from production and processing to logistics, marketing and recycling.

Historically present in Europe and Africa, Total Lubricants is now operating in 150 countries through the Group’s subsidiaries and local partners.

EXPLORE & PRODUCE

TRANSFORM & ENHANCE

TRANSPORT & DISTRIBUTE

oil & gas, solar, biomass

specialty chemicals, polymers, refining-

petrochemicals

trading-shipping, products & services

LUBRICANTS4

Total in the world

No.4

SOLAR

OUR ACTIVITIES

+ 800

+ 4million

+1 BILLION $

INTERNATIONAL OIL & GAS COMPANY

MAJOR INTEGRATED

PLAYER WITH SUNPOWER

& TOTAL SOLAR

INDUSTRIAL SITES

CLIENTS PER DAY in Total stations across the globe

ALLOCATED TO R&D

Staying one step ahead of your performance

Total is a leading international oil company.

As a major player in gas, refining and petrochemicals, Total distributes a comprehensive range of oil products including lubricants.

The Lubricants business employs 5,800 of the 98,000 collaborators working for Total.

Designed for professionals and the general public, the products and services are used in three main sectors: Automotive, Industry and Marine.

As an integrated player, Total manages the entire supply chain from design to distribution. With extensive expertise in product research and development, the company drives every step from production and processing to logistics, marketing and recycling.

Historically present in Europe and Africa, Total Lubricants is now operating in 150 countries through the Group’s subsidiaries and local partners.

EXPLORE & PRODUCE

TRANSFORM & ENHANCE

TRANSPORT & DISTRIBUTE

oil & gas, solar, biomass

specialty chemicals, polymers, refining-

petrochemicals

trading-shipping, products & services

LUBRICANTS4

Total in AfricaAn historic leader in Africa, Total Africa has chosen to be an engaged economic actor by providing affordable energy to meet the evolving needs of the growing population, while taking the envrionment into account.

Committed to better energy, Total Africa contributes to making safer, more efficient and more innovative products and services available to the greatest number of people across the entire continent.

Inspired by its local roots, history and values, Total Africa and its 10,000 employees are committed to offering ever more efficient and innovative products and services while maintaining close partnerships with each customer to add more value.

10,000 employees

70,000indirect jobs

4,300service stations welcome nearly

2 million clients each day

Present in

44 countries

20 milliontons of products

sold and

17% market share

Marketing & Services

Exploration - Production

Gas, Renewables & Power

TOTAL solar lamps (access to energy program)

Refineries (participations)

Trading & Shipping4participations

in refineries (South Africa, Cameroon, Ivory Coast

and Senegal)

Key Figures

Present across the entire energy value chain

LUBRICANTS

LUBRICANTS6

Total in AfricaAn historic leader in Africa, Total Africa has chosen to be an engaged economic actor by providing affordable energy to meet the evolving needs of the growing population, while taking the envrionment into account.

Committed to better energy, Total Africa contributes to making safer, more efficient and more innovative products and services available to the greatest number of people across the entire continent.

Inspired by its local roots, history and values, Total Africa and its 10,000 employees are committed to offering ever more efficient and innovative products and services while maintaining close partnerships with each customer to add more value.

10,000 employees

70,000indirect jobs

4,300service stations welcome nearly

2 million clients each day

Present in

44 countries

20 milliontons of products

sold and

17% market share

Marketing & Services

Exploration - Production

Gas, Renewables & Power

TOTAL solar lamps (access to energy program)

Refineries (participations)

Trading & Shipping4participations

in refineries (South Africa, Cameroon, Ivory Coast

and Senegal)

Key Figures

Present across the entire energy value chain

LUBRICANTS

LUBRICANTS6

Become THE partner of choice for African companies

BUILDlong-term

partnerships with our clients

REDUCEthe environmental

footprint of our activities together

LISTEN to evolving needs to offer efficient energy

SOLUTIONS

Create COMPETITIVE

OFFERSthat guarantee the success

of our partners

DriveINNOVATION

to go further

GUARANTEE the quality

of our products

Ensure theAVAILABILITYof our products with a dedicated logistics

network

LUBRICANTS

“Remain the reference brand, recognized for its proximity with its clients and the value it brings to each of them.”

Momar NGUER, Managing Director Marketing & Services, Roadmap 2017-2021

8 COMMITMENTS

PROMOTE access to

education and jobs

COMMIT to health and

healthcare

ENCOURAGE economic

development and entrepreneurship

REINFORCE safety and

oversee the implementation of

high standards

DEVELOP the local industrial

sector

PRESERVE the environment

BUILD long-lasting relationships

FACILITATE access

to energy

8

Become THE partner of choice for African companies

BUILDlong-term

partnerships with our clients

REDUCEthe environmental

footprint of our activities together

LISTEN to evolving needs to offer efficient energy

SOLUTIONS

Create COMPETITIVE

OFFERSthat guarantee the success

of our partners

DriveINNOVATION

to go further

GUARANTEE the quality

of our products

Ensure theAVAILABILITYof our products with a dedicated logistics

network

LUBRICANTS

“Remain the reference brand, recognized for its proximity with its clients and the value it brings to each of them.”

Momar NGUER, Managing Director Marketing & Services, Roadmap 2017-2021

8 COMMITMENTS

PROMOTE access to

education and jobs

COMMIT to health and

healthcare

ENCOURAGE economic

development and entrepreneurship

REINFORCE safety and

oversee the implementation of

high standards

DEVELOP the local industrial

sector

PRESERVE the environment

BUILD long-lasting relationships

FACILITATE access

to energy

8

Hydraulic turbines

Gas engines

Medium-speed engines

Gensets

Wind turbines

Power transformers

Distribution transformers

Steam/gas/combined-cycle turbines

PRESLIA RANGE NATERIA RANGE TOTAL RUBIA WORKS RANGE

AURELIA TI RANGE CARTER WT 320 RANGE

ISOVOLTINE RANGE CONSUMPTION

INDUSTRIAL SECTOR

TERTIARY SECTOR

TRANSFORMATION & DISTRIBUTION

POWER GENERATION

OUR POWER GENERATION OFFER

LUBRICANTS

Hydraulic turbines

Gas engines

Medium-speed engines

Gensets

Wind turbines

Power transformers

Distribution transformers

Steam/gas/combined-cycle turbines

PRESLIA RANGE NATERIA RANGE TOTAL RUBIA WORKS RANGE

AURELIA TI RANGE CARTER WT 320 RANGE

ISOVOLTINE RANGE CONSUMPTION

INDUSTRIAL SECTOR

TERTIARY SECTOR

TRANSFORMATION & DISTRIBUTION

POWER GENERATION

OUR POWER GENERATION OFFER

LUBRICANTS

The TOTAL RUBIA WORKS range is dedicated to gensets.

Main applicationsEngines that need to work under high-load conditions such as back-up gensets requiring a robust, efficient lubricant regardless of the quality of fuel used.

Approvals and main standardsACEA / API / JASO, CUMMINS, CAT, MTU, MAN, VOLVO, DEUTZ.

The ISOVOLTINE range is designed to insulate and cool all types of transformers. Whether naphthenic, paraffinic or biodegradable, TOTAL insulating oils guarantee optimum protection for your electrical installations and excellent fire-resistance, even in confined or isolated locations.

Main applicationsPower and distribution transformers.

Main approvalsMeet IEC and ASTM standards, as well as transformers manufacturers requirements.

EXTEND THE LIFECYCLE OF YOUR GENSETS! MAKE YOUR POWER GRID MORE SECURE!

TOTAL RUBIA WORKS RANGE ISOVOLTINE RANGE

MAIN RANGEHIGH-SPEED DIESEL AND PETROL ENGINES

TOTAL RUBIA WORKS 1000

TOTAL RUBIA WORKS 1000 FE



TOTAL RUBIA S/ST

TOTAL RUBIA MT

COMPLEMENTARY RANGECOOLANTS

COOLELF AUTO SUPRA

GLACELF AUTO SUPRA

WT SUPRA

MAIN RANGEUNINHIBITED

ISOVOLTINE II

TRACE UNINHIBITED

ISOVOLTINE P1

ISOVOTLINE II T

ISOVOLTINE P2

ISOVOLTINE II X

INHIBITED

ISOVOLTINE BIO

ISOVOLTINE BIO VE

BIODEGRADABLE

BENEFITS• Extend oil drain intervals.• Extend engine lifespan.• Ensure secure functioning when the engine

is operating under extreme constraints.

BENEFITS• Enhance protection and reliability

of your transformers.• Lengthen fluid lifespan.• Improve your equipment performance.

ANAC PRO/EXPERT, ANAC COOLANT

TIG 6

Technical assistance

Training

SERVICES

Our offer for gensets Our offer for transformers

LUBRICANTS12

The TOTAL RUBIA WORKS range is dedicated to gensets.

Main applicationsEngines that need to work under high-load conditions such as back-up gensets requiring a robust, efficient lubricant regardless of the quality of fuel used.

Approvals and main standardsACEA / API / JASO, CUMMINS, CAT, MTU, MAN, VOLVO, DEUTZ.

The ISOVOLTINE range is designed to insulate and cool all types of transformers. Whether naphthenic, paraffinic or biodegradable, TOTAL insulating oils guarantee optimum protection for your electrical installations and excellent fire-resistance, even in confined or isolated locations.

Main applicationsPower and distribution transformers.

Main approvalsMeet IEC and ASTM standards, as well as transformers manufacturers requirements.

EXTEND THE LIFECYCLE OF YOUR GENSETS! MAKE YOUR POWER GRID MORE SECURE!

TOTAL RUBIA WORKS RANGE ISOVOLTINE RANGE

MAIN RANGEHIGH-SPEED DIESEL AND PETROL ENGINES





TOTAL RUBIA S/ST

TOTAL RUBIA MT

COMPLEMENTARY RANGECOOLANTS

COOLELF AUTO SUPRA

GLACELF AUTO SUPRA

WT SUPRA

MAIN RANGEUNINHIBITED

ISOVOLTINE II

TRACE UNINHIBITED

ISOVOLTINE P1

ISOVOTLINE II T

ISOVOLTINE P2

ISOVOLTINE II X

INHIBITED

ISOVOLTINE BIO

ISOVOLTINE BIO VE

BIODEGRADABLE

BENEFITS• Extend oil drain intervals.• Extend engine lifespan.• Ensure secure functioning when the engine

is operating under extreme constraints.

BENEFITS• Enhance protection and reliability

of your transformers.• Lengthen fluid lifespan.• Improve your equipment performance.

ANAC PRO/EXPERT, ANAC COOLANT

TIG 6


Training

SERVICES

Our offer for gensets Our offer for transformers

LUBRICANTS12

CARTER WT 320 is a long-lasting synthetic oil developed to provide outstanding protection for wind turbine gearboxes and extend oil drain intervals up to 10 years.

Total also offers a complete range of lubricants for a wide range of wind turbine applications.

Main applicationsOnshore and offshore wind turbine gearboxes.

Main approvalsWINERGY, ZF WIND, EICKHOFF, and MOVENTAS requirements.

The PRESLIA oil range is designed to lubricate hydraulic, steam, gas and combined-cycle turbines. The special anti-wear, high-pressure formulation ensures a high level of performance even for the strictest specifications.

Main applicationsTurbines with or without gears for peak or continuous operations.

Main approvalsSIEMENS, GE, ALSTOM, ANSALDO, DOOSAN SKODA…

EXTEND THE MAINTENANCE INTERVALS FOR YOUR WIND TURBINES! MAKE YOUR TURBINES MORE RELIABLE!

CARTER WT 320 PRESLIA RANGE

ANAC WIND ANAC INDUS CLASSIC ANAC COOLANT

TIG 6


Training

COMPLEMENTARY RANGES

MAIN RANGES

MAIN RANGE

GEARBOXES

CARTER WT 320 CARTER XEP 320 CARTER EP 320 CARTER BIO 320

REDUCTORS

CARTER XEP CARTER EP CARTER SH

PRESLIA EVO PRESLIA GT PRESLIA BIOPRESLIA HT PRESLIA SE JET

REGULATION SYSTEM (STEAM TURBINES)

AZOLLA AF HYDRANSAFE FR EHC HYDRANSAFE HFDU

GREASES

Main shaft bearings: MULTIS COMPLEX SHD 460, CERAN XS 320

Yaw and blade bearings: MULTIS COMPLEX SHD 100, CERAN XS 80

Yaw and blade toothing: COPAL OGL 0, COPAL OGL 2

Generator bearings: MULTIS COMPLEX SHD 100

HYDRAULICS AZOLLA ZS AZOLLA AF EQUIVIS ZS EQUIVIS AF

SERVICES

BENEFITS• Extend oil drain intervals up

to 10 years.• Maximize protection and lifespan

of your gearboxes.• Reduce maintenance costs.

BENEFITS• Ensure the long-term protection

of your turbines.• Reinforce the efficiency and reliability

of your turbines.• Reduce maitenance shutdown.• Increase productivity.

SERVICES ANAC INDUS TURBINE +AIR Option +MPC Option

ANAC INDUS CLASSIC

TIG 6


Training

COMPRESSORS

DACNIS

HYDRAULICS

AZOLLA

EQUIVIS

REDUCTORS

CARTER

GREASES

MULTIS CERAN COPAL BIOMULTIS BIO OG PLUS BIOADHESIVE PLUS

COOLANTS

COOLELF SUPRA COOLELF AUTO SUPRA GLACELF SUPRA GLACELF AUTO SUPRA WT SUPRA

Our offer for wind turbines Our offer for turbines

LUBRICANTS14

CARTER WT 320 is a long-lasting synthetic oil developed to provide outstanding protection for wind turbine gearboxes and extend oil drain intervals up to 10 years.

Total also offers a complete range of lubricants for a wide range of wind turbine applications.

Main applicationsOnshore and offshore wind turbine gearboxes.

Main approvalsWINERGY, ZF WIND, EICKHOFF, and MOVENTAS requirements.

The PRESLIA oil range is designed to lubricate hydraulic, steam, gas and combined-cycle turbines. The special anti-wear, high-pressure formulation ensures a high level of performance even for the strictest specifications.

Main applicationsTurbines with or without gears for peak or continuous operations.

Main approvalsSIEMENS, GE, ALSTOM, ANSALDO, DOOSAN SKODA…

EXTEND THE MAINTENANCE INTERVALS FOR YOUR WIND TURBINES! MAKE YOUR TURBINES MORE RELIABLE!

CARTER WT 320 PRESLIA RANGE

ANAC WIND ANAC INDUS CLASSIC ANAC COOLANT

TIG 6


Training

COMPLEMENTARY RANGES

MAIN RANGES

MAIN RANGE

GEARBOXES

CARTER WT 320 CARTER XEP 320 CARTER EP 320 CARTER BIO 320

REDUCTORS

CARTER XEP CARTER EP CARTER SH

PRESLIA EVO PRESLIA GT PRESLIA BIOPRESLIA HT PRESLIA SE JET

REGULATION SYSTEM (STEAM TURBINES)

AZOLLA AF HYDRANSAFE FR EHC HYDRANSAFE HFDU

GREASES

Main shaft bearings: MULTIS COMPLEX SHD 460, CERAN XS 320

Yaw and blade bearings: MULTIS COMPLEX SHD 100, CERAN XS 80

Yaw and blade toothing: COPAL OGL 0, COPAL OGL 2

Generator bearings: MULTIS COMPLEX SHD 100

HYDRAULICS AZOLLA ZS AZOLLA AF EQUIVIS ZS EQUIVIS AF

SERVICES

BENEFITS• Extend oil drain intervals up

to 10 years.• Maximize protection and lifespan

of your gearboxes.• Reduce maintenance costs.

BENEFITS• Ensure the long-term protection

of your turbines.• Reinforce the efficiency and reliability

of your turbines.• Reduce maitenance shutdown.• Increase productivity.

SERVICES ANAC INDUS TURBINE +AIR Option +MPC Option

ANAC INDUS CLASSIC

TIG 6


Training

COMPRESSORS

DACNIS

HYDRAULICS

AZOLLA

EQUIVIS

REDUCTORS

CARTER

GREASES

MULTIS CERAN COPAL BIOMULTIS BIO OG PLUS BIOADHESIVE PLUS

COOLANTS

COOLELF SUPRA COOLELF AUTO SUPRA GLACELF SUPRA GLACELF AUTO SUPRA WT SUPRA

Our offer for wind turbines Our offer for turbines

LUBRICANTS14

The NATERIA oil range is designed for lubricating gas engines and motor compressors using any kind of fuel: from natural gas to the strictest biogas. Recognized for their detergency and dispersion capacity, NATERIA oils minimize the formation of deposits and ensure a reinforced corrosion protection.

Main applicationsGas engines used for electricity production, cogeneration or gas compression.

Main approvalsGE JENBACHER, WAUKESHA, CAT, MWM, MTU...

Aurelia TI is the latest range of lubricants for medium-speed four-stroke engines. The range performances exceed the latest generation engines requirements.

Main applicationsAurelia TI is a highly efficient range of lubricants for the lubrication of power plants medium-speed engines. This range is suitable for diesel engines using heavy fuel with diverse levels of sulfur.

Main approvalsValidated by engine manufacturers MAN Diesel & Turbo, WARTSILA, YANMAR, HIMSEN, DIHATSU, NIIGATA…

PROTECT YOUR GAS ENGINES OVER TIME! GUARANTEE THE AVAILABILITY OF YOUR MEDIUM-SPEED ENGINES!

NATERIA RANGE AURELIA TI RANGE

BENEFITS• Increase oil drain intervals.• Reinforce the protection and lifespan

of your engines.• Reduce maintenance costs.

BENEFITS• Reduce maintenance costs.• Increase the efficiency of your lubricant.• Achieve more reliable engine

performance.

COMPLEMENTARY RANGESCOOLANTS

COOLELF SUPRA

GLACELF SUPRA

WT SUPRA

COMPLEMENTARY RANGESSERVICES ANAC GAS ANAC COOLANT

TIG 6


Training

SERVICES DIAGOMAR PLUS

ANAC COOLANT

TECH’CARE KIT

TIG 6


Training

COMPRESSORS

DACNIS

HYDRAULICS

AZOLLA

EQUIVIS

COMPRESSORS

DACNIS

HYDRAULICS

AZOLLA

EQUIVIS

REDUCTORS

CARTER

GREASES

MULTIS

CERAN

REDUCTORS

CARTER

GREASES

MULTIS

CERAN

COOLANTS

WT SUPRA

MAIN RANGEMAIN GRADES

NATERIA MX 40

NATERIA MP 40

NATERIA MJ 40

NATERIA MH 40

SPECIAL GRADES

NATERIA ML 406

NATERIA X 405

NATERIA V 40

NATERIA MP 50

MAIN RANGESMEDIUM-SPEED 4-STROKE ENGINES

AURELIA TI

RUBIA S

DISOLA M

SLOW SPEED 2-STROKE ENGINES

ATLANTA MARINE

TALUSIA

Our offer for gas engines Our offer for stationary engines

LUBRICANTS16

The NATERIA oil range is designed for lubricating gas engines and motor compressors using any kind of fuel: from natural gas to the strictest biogas. Recognized for their detergency and dispersion capacity, NATERIA oils minimize the formation of deposits and ensure a reinforced corrosion protection.

Main applicationsGas engines used for electricity production, cogeneration or gas compression.

Main approvalsGE JENBACHER, WAUKESHA, CAT, MWM, MTU...

Aurelia TI is the latest range of lubricants for medium-speed four-stroke engines. The range performances exceed the latest generation engines requirements.

Main applicationsAurelia TI is a highly efficient range of lubricants for the lubrication of power plants medium-speed engines. This range is suitable for diesel engines using heavy fuel with diverse levels of sulfur.

Main approvalsValidated by engine manufacturers MAN Diesel & Turbo, WARTSILA, YANMAR, HIMSEN, DIHATSU, NIIGATA…

PROTECT YOUR GAS ENGINES OVER TIME! GUARANTEE THE AVAILABILITY OF YOUR MEDIUM-SPEED ENGINES!

NATERIA RANGE AURELIA TI RANGE

BENEFITS• Increase oil drain intervals.• Reinforce the protection and lifespan

of your engines.• Reduce maintenance costs.

BENEFITS• Reduce maintenance costs.• Increase the efficiency of your lubricant.• Achieve more reliable engine

performance.

COMPLEMENTARY RANGESCOOLANTS

COOLELF SUPRA

GLACELF SUPRA

WT SUPRA

COMPLEMENTARY RANGESSERVICES ANAC GAS ANAC COOLANT

TIG 6


Training

SERVICES DIAGOMAR PLUS

ANAC COOLANT

TECH’CARE KIT

TIG 6


Training

COMPRESSORS

DACNIS

HYDRAULICS

AZOLLA

EQUIVIS

COMPRESSORS

DACNIS

HYDRAULICS

AZOLLA

EQUIVIS

REDUCTORS

CARTER

GREASES

MULTIS

CERAN

REDUCTORS

CARTER

GREASES

MULTIS

CERAN

COOLANTS

WT SUPRA

MAIN RANGEMAIN GRADES

NATERIA MX 40

NATERIA MP 40

NATERIA MJ 40

NATERIA MH 40

SPECIAL GRADES

NATERIA ML 406

NATERIA X 405

NATERIA V 40

NATERIA MP 50

MAIN RANGESMEDIUM-SPEED 4-STROKE ENGINES

AURELIA TI

RUBIA S

DISOLA M

SLOW SPEED 2-STROKE ENGINES

ATLANTA MARINE

TALUSIA

Our offer for gas engines Our offer for stationary engines

LUBRICANTS16

LUBRICANTS

Our service offer

Competitiveness, installations safety, people’s health and respect for the environment are major challenges for all industries.

The lubricant plays a major role in all these fields: when it is properly used, it contributes to the performance and longevity of the production tools, to the safety of goods, to the health of its users, and to the protection of the envrionment.

TOPCIS COVERED: the use of industrial lubricants, safety and the environment

• Controlling and identifying... means better lubrication,

• Knowledge and understanding... means reducing risk,

• Applying and choosing... means limiting envrionmental risks.

Thanks to its high residual performance and precision, ANAC analysis enables you to:

• Monitor the machine and lubricant condition without productivity loss due to unscheduled maintenance and downtime.

• Detect anomalies : premature wear of a machine part, pollution (water, mixture of products, solid pollutants, dust ...).

• Optimize the lubricant use by maximizing oil change intervals.

A QUICK AND SECURE ACCESS TO YOUR OIL ANALYSIS

The ANAC website offers a personalized and safe access to your oil analysis results:

• Look up the results immediately once the analysis is completed.

• Download the diagnosis history and enables identification of changes in the machine performance or condition.

• Transfer directly the results and comments in the TIG 6 software in order to plan effectively your maintenance operations.

Oil analysis Your oil is indicative of the health of your machines. For this reason, Total has developed advanced oil analysis tools to increase your oil drain intervals, anticipate and diagnose any anomalies in your equipment, while optimizing its availability.

TrainingThe competence of your team is our priority!For this reason, Total offers specialized training courses for users in every industrial sector.

A PERSONALIZED DIAGNOSIS OF YOUR OILS IN SERVICE FOR EVERY APPLICATION

ANAC PRO/EXPERT: oil for gensets. ANAC COOLANT: coolants. ANAC GAS: oil for gas engines. ANAC WIND: oil for wind turbine gearboxes. DIAGOMAR PLUS: oil for medium-speed and low-speed engines.

ANAC INDUS: Analysis grids adapted to the various families of industrial oils:

• CLASSIC: oil for industrial, hydraulic, movements, compressors and reductors.

• TURBINES: oil for turbines.• FRIGO: oils for refrigeration compressors.• CALO: coolant oil.

TECH’CARE

Onsite self-analysis kit for medium and low-speed engines oil.

ORGANISATION OF PREVENTIVE, CONDITION-BASED AND CORRECTIVE MAINTENANCE

• Workload planning.• Assigning work orders

to the operators.• Tracking history of operators.• Checking points considered as

critical for the control of quality and safety programs.

MANAGEMENT OF THE OILS IN SERVICE ANALYSIS

• Triggering of oil sampling.• Direct import of our labs

analysis results into TIG 6.• Archiving of physical and

chemical characteristics, diagnostics and comments.

• Graphical monitoring of every measured characteristic.

MONITORING OF LUBRICANTS AND SPARE PARTS STOCKS

• Forecasts and monitoring of the lubricants and spare parts consumption.

• Order and delivery management.

ANALYSIS OF MAINTENANCE COSTS

• The cost of lubricants maintenance products and labour.

• Report exported to Excel.

INTEGRATED DOCUMENT MANAGEMENT

• Products : technical and safety data sheets, etc.

• Documents : internal procedures, instructions maintenance guides, etc.

• External documents : standards, legislation, etc.

• Supplier contacts.

CUSTOMISED CONFIGURATION OF THE SOFTWARE

• Integration of your datas after a feasibility study.

• Simultaneous management of several maintenance plans.

• Data sharing on a network.• Configurable levels of access:

To provide the optimum support for your operations, Total has developed a comprehensive range of services.

Total Lubricants gives you access to its new-generation software, TIG 6. This software is based on more than 20 years of field experience and expertise from engineers in daily contact with key maintenance players, TIG 6 is easy to understand and to use. It is operational after a short training session for your staff.

Technical Assistance

Lubricants cannot give their best performance if not properly selected, put into service, used and monitored.

Dedicated field engineers provide support on lubricants and lubrication related services to assist you in getting the most of your lubricants.

• Plant audits• Staff training• Lubricants selection• Field tests• Oil analysis• Total Cost of Ownership (TCO) approach• Thermographic inspection• Open gears inspection

Organisationde la maintenance préventive,conditionnelle et corrective

Planification des charges de travail.

Remise de bons de travaux aux opérateurs.

Historique des interventions.

Déclenchement des opérations non planifiées.

Contrôle des points critiques pour la maîtrise des démarches qualité et sécurité.

Suivides stocks de lubrifiantset de pièces détachées

Prévision et suivi des consommations de lubrifiants et de pièces détachées.

Gestion des commandes et des livraisons.

Paramétragesur mesure du logiciel

Intégration de vos données après étude de faisabilité.

Gestion simultanée de plusieurs plans de maintenance.

Partage des données en réseau.

Niveaux d’accès/d’autorisations paramétrables :

accès 1Administrateur

accès 2Opérateur

accès 3Consultation

Gestiondes analyses d’huiles en service

Déclenchement des prélèvements d’huile.

Importation directe des résultats d’analyses réalisées par nos laboratoires.

Archivage des caractéristiques physico-chimiques, des diagnostics et des commentaires.

Suivi graphique de chaque caractéristique mesurée.

Gestiondocumentaire intégrée

Produits : fiches techniques,fiches de données de sécurité, etc.

Documents : procédures internes, modes opératoires, guides de maintenance, etc.

Documents externes : normes, législation, etc.

Contacts fournisseurs.

Analysedes coûts de maintenance

Coûts des lubrifiants, des produits de maintenance, de la main d’œuvre.

Reportings exportés sous format Excel®.

Conception du plan de graissageMise à jour

Calcul des opérations de maintenanceValidation

Consultation du plan de graissage, historique, interventions, analyses… Impression

The functionalities of

Access 1Administrator

Access 2Operator

Access 3Consultation

• Design of the lubrication plan

• Updates

• Calculation of maintenance operations

• Validation

• Consultation of the lubrication plan, history, operations, analysis, etc.

• Print-outs

18

LUBRICANTS

Our service offer

Competitiveness, installations safety, people’s health and respect for the environment are major challenges for all industries.

The lubricant plays a major role in all these fields: when it is properly used, it contributes to the performance and longevity of the production tools, to the safety of goods, to the health of its users, and to the protection of the envrionment.

TOPCIS COVERED: the use of industrial lubricants, safety and the environment

• Controlling and identifying... means better lubrication,

• Knowledge and understanding... means reducing risk,

• Applying and choosing... means limiting envrionmental risks.

Thanks to its high residual performance and precision, ANAC analysis enables you to:

• Monitor the machine and lubricant condition without productivity loss due to unscheduled maintenance and downtime.

• Detect anomalies : premature wear of a machine part, pollution (water, mixture of products, solid pollutants, dust ...).

• Optimize the lubricant use by maximizing oil change intervals.

A QUICK AND SECURE ACCESS TO YOUR OIL ANALYSIS

The ANAC website offers a personalized and safe access to your oil analysis results:

• Look up the results immediately once the analysis is completed.

• Download the diagnosis history and enables identification of changes in the machine performance or condition.

• Transfer directly the results and comments in the TIG 6 software in order to plan effectively your maintenance operations.

Oil analysis Your oil is indicative of the health of your machines. For this reason, Total has developed advanced oil analysis tools to increase your oil drain intervals, anticipate and diagnose any anomalies in your equipment, while optimizing its availability.

TrainingThe competence of your team is our priority!For this reason, Total offers specialized training courses for users in every industrial sector.

A PERSONALIZED DIAGNOSIS OF YOUR OILS IN SERVICE FOR EVERY APPLICATION

ANAC PRO/EXPERT: oil for gensets. ANAC COOLANT: coolants. ANAC GAS: oil for gas engines. ANAC WIND: oil for wind turbine gearboxes. DIAGOMAR PLUS: oil for medium-speed and low-speed engines.

ANAC INDUS: Analysis grids adapted to the various families of industrial oils:

• CLASSIC: oil for industrial, hydraulic, movements, compressors and reductors.

• TURBINES: oil for turbines.• FRIGO: oils for refrigeration compressors.• CALO: coolant oil.

TECH’CARE

Onsite self-analysis kit for medium and low-speed engines oil.

ORGANISATION OF PREVENTIVE, CONDITION-BASED AND CORRECTIVE MAINTENANCE

• Workload planning.• Assigning work orders

to the operators.• Tracking history of operators.• Checking points considered as

critical for the control of quality and safety programs.

MANAGEMENT OF THE OILS IN SERVICE ANALYSIS

• Triggering of oil sampling.• Direct import of our labs

analysis results into TIG 6.• Archiving of physical and

chemical characteristics, diagnostics and comments.

• Graphical monitoring of every measured characteristic.

MONITORING OF LUBRICANTS AND SPARE PARTS STOCKS

• Forecasts and monitoring of the lubricants and spare parts consumption.

• Order and delivery management.

ANALYSIS OF MAINTENANCE COSTS

• The cost of lubricants maintenance products and labour.

• Report exported to Excel.

INTEGRATED DOCUMENT MANAGEMENT

• Products : technical and safety data sheets, etc.

• Documents : internal procedures, instructions maintenance guides, etc.

• External documents : standards, legislation, etc.

• Supplier contacts.

CUSTOMISED CONFIGURATION OF THE SOFTWARE

• Integration of your datas after a feasibility study.

• Simultaneous management of several maintenance plans.

• Data sharing on a network.• Configurable levels of access:

To provide the optimum support for your operations, Total has developed a comprehensive range of services.

Total Lubricants gives you access to its new-generation software, TIG 6. This software is based on more than 20 years of field experience and expertise from engineers in daily contact with key maintenance players, TIG 6 is easy to understand and to use. It is operational after a short training session for your staff.

Technical Assistance

Lubricants cannot give their best performance if not properly selected, put into service, used and monitored.

Dedicated field engineers provide support on lubricants and lubrication related services to assist you in getting the most of your lubricants.

• Plant audits• Staff training• Lubricants selection• Field tests• Oil analysis• Total Cost of Ownership (TCO) approach• Thermographic inspection• Open gears inspection

Organisationde la maintenance préventive,conditionnelle et corrective

Planification des charges de travail.

Remise de bons de travaux aux opérateurs.

Historique des interventions.

Déclenchement des opérations non planifiées.

Contrôle des points critiques pour la maîtrise des démarches qualité et sécurité.

Suivides stocks de lubrifiantset de pièces détachées

Prévision et suivi des consommations de lubrifiants et de pièces détachées.

Gestion des commandes et des livraisons.

Paramétragesur mesure du logiciel

Intégration de vos données après étude de faisabilité.

Gestion simultanée de plusieurs plans de maintenance.

Partage des données en réseau.

Niveaux d’accès/d’autorisations paramétrables :

accès 1Administrateur

accès 2Opérateur

accès 3Consultation

Gestiondes analyses d’huiles en service

Déclenchement des prélèvements d’huile.

Importation directe des résultats d’analyses réalisées par nos laboratoires.

Archivage des caractéristiques physico-chimiques, des diagnostics et des commentaires.

Suivi graphique de chaque caractéristique mesurée.

Gestiondocumentaire intégrée

Produits : fiches techniques,fiches de données de sécurité, etc.

Documents : procédures internes, modes opératoires, guides de maintenance, etc.

Documents externes : normes, législation, etc.

Contacts fournisseurs.

Analysedes coûts de maintenance

Coûts des lubrifiants, des produits de maintenance, de la main d’œuvre.

Reportings exportés sous format Excel®.

Conception du plan de graissageMise à jour

Calcul des opérations de maintenanceValidation

Consultation du plan de graissage, historique, interventions, analyses… Impression

The functionalities of

Access 1Administrator

Access 2Operator

Access 3Consultation

• Design of the lubrication plan

• Updates

• Calculation of maintenance operations

• Validation

• Consultation of the lubrication plan, history, operations, analysis, etc.

• Print-outs

18

Inhibitors: Inhibitors represent only a small part of the coolant content, however they have a signifcant impact on its quality.

There are 2 kinds of inhibitors: • Technology based on mineral or “traditional”

inhibitors.• Technology based on organic additives

(OAT): present in most of the modern applications, they are also called “carboxylate”.

What is the difference?Inhibitors behave differently.Mineral inhibitors create a protective layer inside the cooling circuit.Organic inhibitors selectively protect the inherent weak points in the alloys.

CoolantsAny power generation installation represents a significant investment. To protect and maintain its performance over time, it is vital to conserve the cooling circuit. Total coolants help you to protect your production tools, day after day.

LUBRICANTS

Exchanges heat

efficiently

Protects from freezing

Protects against corrosion

and cavitation

Protects from boiling

Respects the environment

Composition of coolants:

*MEG: Monoethylene glycol** MPG: Monopropylene glycol

Properties of coolants: The freezing point by itself does not determine the quality of the coolant. An efficient coolant:

INHIBITORS (ADDITIVES)Protect from corrosion, cavitation and erosion. Inhibitors can also have an impact on heat transfer and, to a lesser extent, protect from freezing and boiling.

MEG* or MPG**

Protect from freezing or boiling.MEG is more frequently used than MPG as it is less expensive, and its weaker viscosity offers comparable heat transfer properties.

WATER* Heat transfer.Water remains the liquid that transfers heat most effectively: it is inexpensive and widely available.

THE SUPRA RANGE ENSURES:Better heat transfer and a more efficient coolant.

Better compatibility with materials • Increase the lifespan of your water pump by 50%

• Protect your aluminium plate.

• Protect from cavitation.

• Enhance compatibility with elastomers and plastics.

Longer lifespan• Lower consumption.

• Extend your coolants’ lifespan.

Products / characteristics Ready-to-use Concentrated

Coolelf Supra

Coolelf Auto Supra

Glacelf Supra

Glacelf Auto Supra

WT Supra

*Demineralized water recommended

20

Inhibitors: Inhibitors represent only a small part of the coolant content, however they have a signifcant impact on its quality.

There are 2 kinds of inhibitors: • Technology based on mineral or “traditional”

inhibitors.• Technology based on organic additives

(OAT): present in most of the modern applications, they are also called “carboxylate”.

What is the difference?Inhibitors behave differently.Mineral inhibitors create a protective layer inside the cooling circuit.Organic inhibitors selectively protect the inherent weak points in the alloys.

CoolantsAny power generation installation represents a significant investment. To protect and maintain its performance over time, it is vital to conserve the cooling circuit. Total coolants help you to protect your production tools, day after day.

LUBRICANTS

Exchanges heat

efficiently

Protects from freezing

Protects against corrosion

and cavitation

Protects from boiling

Respects the environment

Composition of coolants:

*MEG: Monoethylene glycol** MPG: Monopropylene glycol

Properties of coolants: The freezing point by itself does not determine the quality of the coolant. An efficient coolant:

INHIBITORS (ADDITIVES)Protect from corrosion, cavitation and erosion. Inhibitors can also have an impact on heat transfer and, to a lesser extent, protect from freezing and boiling.

MEG* or MPG**

Protect from freezing or boiling.MEG is more frequently used than MPG as it is less expensive, and its weaker viscosity offers comparable heat transfer properties.

WATER* Heat transfer.Water remains the liquid that transfers heat most effectively: it is inexpensive and widely available.

THE SUPRA RANGE ENSURES:Better heat transfer and a more efficient coolant.

Better compatibility with materials • Increase the lifespan of your water pump by 50%

• Protect your aluminium plate.

• Protect from cavitation.

• Enhance compatibility with elastomers and plastics.

Longer lifespan• Lower consumption.

• Extend your coolants’ lifespan.

Products / characteristics Ready-to-use Concentrated

Coolelf Supra

Coolelf Auto Supra

Glacelf Supra

Glacelf Auto Supra

WT Supra

*Demineralized water recommended

20

ATLANTA MARINE D2005 / 3005 / 4005

Mineral • Special system oil to be used to top up when the viscosity of the system oil in service is too high.

• Excellent anti-rust and anti-corrosive properties.• Excellent capacity for water separation.

SAE 30 or SAE 40SAE 20 in particular cases

• Developed with manufacturers MAN, WinGD, Mitsubishi.

AURELIA TI Mineral • AURELIA TI is a range of trunk piston engine oils developed for use in medium speed diesel engines burning residual fuels.

• AURELIA TI combines an exclusive formulation of the latest additive technologies, developed by the Total research center, and a highly refined base oil to provide a substantial safety margin to cope with higher stress levels including those of the latest and future designs of diesel engines.

• AURELIA TI exceeds the CF specification defined by the American Petroleum Institute.

• It ensures outstanding cleanliness of both the hot and cold parts of an engine thanks to its detergency and dispersant properties. Its ability to reduce heavy deposit build-up in an engine creates savings via a reduction in maintenance costs.

• It also offers excellent resistance to the negative effects of residual fuel contamination, along with excellent thermal resistance and oxidization resistance.

• The stable viscosity of AURELIA TI means that fewer top-ups are needed.

• The product is also very water resistant, with outstanding demulsibility capacity, enabling rapid removal of water after an ingress and the maintenance of good engine performance.

• Good wear protection and excellent oil film strength at extreme pressures are also established features of the product.

SAE 30 or SAE 40 • Available with 30,40 BN but also 55, 20 BN.• Aurelia TI range has been developed in close collaboration

with OEMs and meets the requirements of all major medium speed engine manufacturers.

AZOLLA AF Mineral • Hydraulic systems especially sensitive to the formation of deposits and/or operating in high temperatures and pressure conditions.

• Bearings and miscellaneous equipment.

• Formation deposits prevented due to ashless additives.• Very good anti-wear and thermal stability performances.• Very good filterability in services even in the presence of water.• Extension of oil drain intervals. TOST = 4000 hours.

22 to 100 • ISO 11158 HM • DIN 51524-2 HLP• Eaton I-286S, M-2950S• Denison HF0, HF1, HF2

AZOLLA ZS Mineral • Hydraulic systems operating in high temperature and pressure conditions.

• Bearings and miscellaneous devices.

• Reinforced protection of the equipment thanks to anti-wear and anti-corrosion properties.

• Considerable service life for the fluid and preventing deposits, ensured by thermal stability and resistance to oxidation.

• Filterability even in the presence of water.


BIOADHESIVE PLUS Calcium • Outstanding adhesiveness, biodegradable grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).

• Recommended for applications subjected to water (Galle chains).

• Ultimate biodegradability according to OECD 301-B (>60%).• EAL Grease complying with EPA 2013 Vessel General Permit

(VGP).• Insoluble in water.• Excellent anti-corrosion properties even in the presence of sea

water.

320 • ISO 6743-9 L-XBBIA 1• DIN 51502 OGPON-21

BIOMULTIS EP 2 Lithium • Biodegradable Extreme Pressure, multipurpose grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).

• Excellent biodegradability according to OECD 301-B (>60%).• EAL Grease complying with EPA 2013 Vessel General Permit

(VGP).• Good resistance to water washout.

150 • ISO 6743-9 L-XCEEB 2• DIN 51502 KP2K-30

BIO OG PLUS Calcium • Highly adhesive, Extreme Pressure biodegraddable grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).

• Espacially recommended for opean gear lubrication.

• Ultimate biodegradable according to OECD 301-B (>60%).• Good resistance to water washout.• Excellent anti-corrosion properties even in the presence

of sea water.

1000 • ISO 6743-9L-XBBIB0/1• DIN 51502 OGE0/1E-20

BIOPRESLIA HT Saturated synthetic ester

• Hydraulic power generation plant (turbines and hydraulic systems).

• Resistance to oxidation.• Very good defoaming, air release and demulse properties.• Good compatibility with elastomers.• Biodegradable.

22 to 100 • ISO 15380• Total Ecosolutions

CARTER BIO Synthetic ester • Gears offering a risk of incidental discharges into the environment.

• Biodegradable product.• Very good extreme-pressure, anti-wear and anti-corrosion

properties.• Oxidation stability.

68 to 460 Equivalence• ISO 12925-1 CKD • DIN 51517-3 CLP • EAL (Environement Acceptable Lubricant)

CARTER EP Mineral • Industrial gears, bearings under high loads and high temperatures.

• Extension of oil drain intervals.• Protection against micropitting.

68 to 1000 • ISO 12925-1 CKD • DIN 51517-3 CLP• AGMA 9005-E02 EP • U. S. Steel 224 • Flender

CARTER SH Synthetic PAO • Gears subjected to very high loads and high temperatures in difficult environments.

• Gears for wind turbine.

• Excellent protection against corrosion, wear and micropitting.• Extended oil service life due to excellent thermal stability.• Can operate outdoors thanks to a very low pour point.

150 to 1000 • ISO 12925-1 CKD• DIN 51517-3 CLP Flender • FAG • SKF

CARTER WT 320 Synthetic PAO • Specially designed for wind turbine gearboxes.• 10 years oil drain interval under standard operating conditions.

• Very high protection of the gears against micropitting and corrosion.

• Excellent extreme pression properties.• Outstanding stability in the presence of water.• Resistance to very high temperatures without forming deposits. • Neutrality towards seal, inner coatings and yellow metals.• Excellent filtrability.

320 • Approved by WINERGY, ZF WIND, EICKHOFF. • Meet the requirements of MOVENTAS and other wind

gearbox manufacturers.

CARTER XEP Top tier Mineral • Gears under high loads, high temperatures and difficult environments.

• Gears for wind turbines.

• Extended oil service life due to excellent thermal stability.• Reinforcement of anti-corrosion protection.• Very good protection of bearings.• Excellent protection of toothing against micropitting.

150 to 680 • ISO 12925-1 CKD • DIN 51517-3 CLP• AGMA 9005-E02 EP• U. S. Steel 224 • FAG • Flender

CERAN AD PLUS Complex Calcium Sulfonate

• Highly adhesive, Extreme Pressure grease adapted to severe conditions.

• Recommended for metal cables.• Suitable for applications in cement plants, mines, quarries,

offshore, marine.

• Outstanding resistance to water.• Extended life of parts subjected to heavy loads.

>1700 • ISO 6743-9 • L-XBDIB 0• DIN 51502 ME1E-20

CERAN XM 220 Complex Calcium Sulfonate

• Extreme pressure, high performance, multipurpose, grease. • Recommended for the lubrication of severe industrial

appplications in extreme conditions (high load, temperature, water,dust) such as continuous castings and rolling mills in steel plans, bearings in wet and dry (felt rolls) sections of paper mills.

• Excellent water resistance. • Highly loads applications.• Extended relubrication intervals.• Enables inventory rationalization.

220 • ISO 6743-9 L-XCFIB 1/2• DIN 51502 • KP1/2R-30


• Extreme Pressure, very high performance, multipurpose grease for shocks loaded industrial applicationsat high temperatures.

• Recommended for the lubrication of bearings in steel plants, in Paper Industry, for the lubrication of hard wood granular presses and in all industrial applications under severe conditions (water, dust).

• Excellent water resistance. • Highly loaded applications • Extended relubrication intervals.• Good anti corrosion properties.

460 • ISO 6743-9 L-XBFIB 1/2• DIN 51502 KP1/2R-25

CERAN XS 80 Complex Calcium Sulfonate

• Very high performance, extreme pressure, synthetic grease designed for high speed applications over a wide range of temperature.

• Very low temperature.• Excellent water resistance.• Long service life.• Reduced energy consumption.

80 • ISO 6743-9 L-XEFFB 1/2• DIN 51502 • KP1/2R-55


• Very high performance, Extreme pressure, synthetic grease designed for loaded applications over a wide range of temperature under severe conditions.

320 • ISO 6743-9 L-XEFFB 1/2• DIN 51502 KP1/2R-55

COOLELF AUTO SUPRA

Ready-to-use coolants

• Diesel industrial engines of all sizes and wind turbines cooling systems.

• Long life organic additives technology.• High antifreeze protection.

• Meet the international specifications about coolants.

COOLELF SUPRA Ready-to-use coolants

• Diesel industrial engines, gas engines of all sizes. • Long life. -26 • AFNOR NF R 15-601• ASTM D 3306,D 4656, D 4985• BS 6580 • SAE J 1034 MWM (Deutz)• GE Jenbacher • Rolls-Royce • MTU

COPAL OGL 0 Complex Aluminium

• Highly adhesive Extreme pressure grease, for heavy loads and high temperatures.

• Application in cement plants : open gears of kilns and mill drives.• Application in sugar mills : open gears in sugar cane mills.

• Contains 8 % Graphite and 1 % MoS2.• Dual solid additivation reduces wear particularly near the tooth

crest and tooth base, decreasing energy consumption. • Very good water resistance.

>1000 • ISO 6743-9L-L-XBDHB 0/00• DIN 51502 OGPF0/00N-20


• Highly adhesive extreme pressure grease, for heavy loads and high temperatures.

• Specially developed for lubrication of open gears when a NLGI 2 grade is required.

>1000 • ISO 6743-9L-L-XBDHB 2• DIN 51502 OGPF2N-15

PRODUCT CATALOG PRODUCT CATALOGPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS PRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

22

ATLANTA MARINE D2005 / 3005 / 4005

Mineral • Special system oil to be used to top up when the viscosity of the system oil in service is too high.

• Excellent anti-rust and anti-corrosive properties.• Excellent capacity for water separation.

SAE 30 or SAE 40SAE 20 in particular cases

• Developed with manufacturers MAN, WinGD, Mitsubishi.

AURELIA TI Mineral • AURELIA TI is a range of trunk piston engine oils developed for use in medium speed diesel engines burning residual fuels.

• AURELIA TI combines an exclusive formulation of the latest additive technologies, developed by the Total research center, and a highly refined base oil to provide a substantial safety margin to cope with higher stress levels including those of the latest and future designs of diesel engines.

• AURELIA TI exceeds the CF specification defined by the American Petroleum Institute.

• It ensures outstanding cleanliness of both the hot and cold parts of an engine thanks to its detergency and dispersant properties. Its ability to reduce heavy deposit build-up in an engine creates savings via a reduction in maintenance costs.

• It also offers excellent resistance to the negative effects of residual fuel contamination, along with excellent thermal resistance and oxidization resistance.

• The stable viscosity of AURELIA TI means that fewer top-ups are needed.

• The product is also very water resistant, with outstanding demulsibility capacity, enabling rapid removal of water after an ingress and the maintenance of good engine performance.

• Good wear protection and excellent oil film strength at extreme pressures are also established features of the product.

SAE 30 or SAE 40 • Available with 30,40 BN but also 55, 20 BN.• Aurelia TI range has been developed in close collaboration

with OEMs and meets the requirements of all major medium speed engine manufacturers.

AZOLLA AF Mineral • Hydraulic systems especially sensitive to the formation of deposits and/or operating in high temperatures and pressure conditions.

• Bearings and miscellaneous equipment.

• Formation deposits prevented due to ashless additives.• Very good anti-wear and thermal stability performances.• Very good filterability in services even in the presence of water.• Extension of oil drain intervals. TOST = 4000 hours.


AZOLLA ZS Mineral • Hydraulic systems operating in high temperature and pressure conditions.

• Bearings and miscellaneous devices.

• Reinforced protection of the equipment thanks to anti-wear and anti-corrosion properties.

• Considerable service life for the fluid and preventing deposits, ensured by thermal stability and resistance to oxidation.

• Filterability even in the presence of water.


BIOADHESIVE PLUS Calcium • Outstanding adhesiveness, biodegradable grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).

• Recommended for applications subjected to water (Galle chains).

• Ultimate biodegradability according to OECD 301-B (>60%).• EAL Grease complying with EPA 2013 Vessel General Permit

(VGP).• Insoluble in water.• Excellent anti-corrosion properties even in the presence of sea

water.

320 • ISO 6743-9 L-XBBIA 1• DIN 51502 OGPON-21

BIOMULTIS EP 2 Lithium • Biodegradable Extreme Pressure, multipurpose grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).

• Excellent biodegradability according to OECD 301-B (>60%).• EAL Grease complying with EPA 2013 Vessel General Permit

(VGP).• Good resistance to water washout.

150 • ISO 6743-9 L-XCEEB 2• DIN 51502 KP2K-30

BIO OG PLUS Calcium • Highly adhesive, Extreme Pressure biodegraddable grease for industrial and marine applications requiring environmentally acceptable lubricants (EAL).

• Espacially recommended for opean gear lubrication.

• Ultimate biodegradable according to OECD 301-B (>60%).• Good resistance to water washout.• Excellent anti-corrosion properties even in the presence

of sea water.

1000 • ISO 6743-9L-XBBIB0/1• DIN 51502 OGE0/1E-20

BIOPRESLIA HT Saturated synthetic ester

• Hydraulic power generation plant (turbines and hydraulic systems).

• Resistance to oxidation.• Very good defoaming, air release and demulse properties.• Good compatibility with elastomers.• Biodegradable.

22 to 100 • ISO 15380• Total Ecosolutions

CARTER BIO Synthetic ester • Gears offering a risk of incidental discharges into the environment.

• Biodegradable product.• Very good extreme-pressure, anti-wear and anti-corrosion

properties.• Oxidation stability.

68 to 460 Equivalence• ISO 12925-1 CKD • DIN 51517-3 CLP • EAL (Environement Acceptable Lubricant)

CARTER EP Mineral • Industrial gears, bearings under high loads and high temperatures.

• Extension of oil drain intervals.• Protection against micropitting.

68 to 1000 • ISO 12925-1 CKD • DIN 51517-3 CLP• AGMA 9005-E02 EP • U. S. Steel 224 • Flender

CARTER SH Synthetic PAO • Gears subjected to very high loads and high temperatures in difficult environments.

• Gears for wind turbine.

• Excellent protection against corrosion, wear and micropitting.• Extended oil service life due to excellent thermal stability.• Can operate outdoors thanks to a very low pour point.

150 to 1000 • ISO 12925-1 CKD• DIN 51517-3 CLP Flender • FAG • SKF

CARTER WT 320 Synthetic PAO • Specially designed for wind turbine gearboxes.• 10 years oil drain interval under standard operating conditions.

• Very high protection of the gears against micropitting and corrosion.

• Excellent extreme pression properties.• Outstanding stability in the presence of water.• Resistance to very high temperatures without forming deposits. • Neutrality towards seal, inner coatings and yellow metals.• Excellent filtrability.

320 • Approved by WINERGY, ZF WIND, EICKHOFF. • Meet the requirements of MOVENTAS and other wind

gearbox manufacturers.

CARTER XEP Top tier Mineral • Gears under high loads, high temperatures and difficult environments.

• Gears for wind turbines.

• Extended oil service life due to excellent thermal stability.• Reinforcement of anti-corrosion protection.• Very good protection of bearings.• Excellent protection of toothing against micropitting.

150 to 680 • ISO 12925-1 CKD • DIN 51517-3 CLP• AGMA 9005-E02 EP• U. S. Steel 224 • FAG • Flender

CERAN AD PLUS Complex Calcium Sulfonate

• Highly adhesive, Extreme Pressure grease adapted to severe conditions.

• Recommended for metal cables.• Suitable for applications in cement plants, mines, quarries,

offshore, marine.

• Outstanding resistance to water.• Extended life of parts subjected to heavy loads.

>1700 • ISO 6743-9 • L-XBDIB 0• DIN 51502 ME1E-20


• Extreme pressure, high performance, multipurpose, grease. • Recommended for the lubrication of severe industrial

appplications in extreme conditions (high load, temperature, water,dust) such as continuous castings and rolling mills in steel plans, bearings in wet and dry (felt rolls) sections of paper mills.

• Excellent water resistance. • Highly loads applications.• Extended relubrication intervals.• Enables inventory rationalization.

220 • ISO 6743-9 L-XCFIB 1/2• DIN 51502 • KP1/2R-30


• Extreme Pressure, very high performance, multipurpose grease for shocks loaded industrial applicationsat high temperatures.

• Recommended for the lubrication of bearings in steel plants, in Paper Industry, for the lubrication of hard wood granular presses and in all industrial applications under severe conditions (water, dust).

• Excellent water resistance. • Highly loaded applications • Extended relubrication intervals.• Good anti corrosion properties.

460 • ISO 6743-9 L-XBFIB 1/2• DIN 51502 KP1/2R-25


• Very high performance, extreme pressure, synthetic grease designed for high speed applications over a wide range of temperature.

• Very low temperature.• Excellent water resistance.• Long service life.• Reduced energy consumption.

80 • ISO 6743-9 L-XEFFB 1/2• DIN 51502 • KP1/2R-55


• Very high performance, Extreme pressure, synthetic grease designed for loaded applications over a wide range of temperature under severe conditions.

320 • ISO 6743-9 L-XEFFB 1/2• DIN 51502 KP1/2R-55

COOLELF AUTO SUPRA

Ready-to-use coolants

• Diesel industrial engines of all sizes and wind turbines cooling systems.

• Long life organic additives technology.• High antifreeze protection.


COOLELF SUPRA Ready-to-use coolants

• Diesel industrial engines, gas engines of all sizes. • Long life. -26 • AFNOR NF R 15-601• ASTM D 3306,D 4656, D 4985• BS 6580 • SAE J 1034 MWM (Deutz)• GE Jenbacher • Rolls-Royce • MTU


• Highly adhesive Extreme pressure grease, for heavy loads and high temperatures.

• Application in cement plants : open gears of kilns and mill drives.• Application in sugar mills : open gears in sugar cane mills.

• Contains 8 % Graphite and 1 % MoS2.• Dual solid additivation reduces wear particularly near the tooth

crest and tooth base, decreasing energy consumption. • Very good water resistance.

>1000 • ISO 6743-9L-L-XBDHB 0/00• DIN 51502 OGPF0/00N-20


• Highly adhesive extreme pressure grease, for heavy loads and high temperatures.

• Specially developed for lubrication of open gears when a NLGI 2 grade is required.

>1000 • ISO 6743-9L-L-XBDHB 2• DIN 51502 OGPF2N-15

PRODUCT CATALOG PRODUCT CATALOGPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS PRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

22

DACNIS Mineral • Rotary and reciprocating air compressors. • Moderate conditions.• Discharge temperature up to 80°C.

• Optimal performance.• Excellent protection of your equipment.• Extension of the oil drain intervals, recommended at 2 000 hours.• Improved life cycle of filters and separators.• Significant savings on maintenance costs.

32 to 150 32 to 68 grades: • ISO 6743-3 DAH • ISO DP 6521 100 and 150 grades: • ISO 6743-3 DAB • DIN 51 506 VDL Bauer • CompAir • Dresser-Rand • Sauer & Sohn• Sulzer Burckhardt...

DACNIS LD Hydrocracked mineral oil

• Rotary screw-type air compressors. • Oil drain interval 4 000 hours.• Low pour point.

32 to 68 • ISO 6743-3 DAJ • ISO DP 6521• DIN 51 506 VDL Atlas Copco • CompAir• Hydrovane • Dresser-Rand...

DACNIS LPG 150 Synthetic PAG • Hydrocarbon gas compressors. • Resistant to dilution by hydrocarbon gases.• Excellent chemical stability.

150 • ISO 6743-3: DGC• Sulzer-Burckhardt • Howden • Aerzen

DACNIS SH Synthetic PAO • Rotary screw-type air compressors. • Oil drain intervals 8 000 hours.• Very low pour point.

32 to 100 • ISO 6743-3 DAJ• ISO DP 6521 Atlas Copco • Hydrovane• CompAir • Dresser-Rand...

DISOLA M Mineral • Lubricant designed for medium and high-speed engines running on distillate fuel oils and biofuels of for dual-fuel engines running on distillate fuels.

• Reduced build-up of deposits.• Keeps cold parts of the engine clean.• Extreme pressure properties to maintain oil film. • Reduced engine component wear.

SAE 30 and SAE 40 • Disola M range has been developed and approved by medium and high-speed engines motorists.

EQUIVIS AF Hydrocracked mineral oil

• Hydraulic systems operating outdoors. • Extension of oil drain intervals.• Improved shear stability.

32 to 68 • ISO 11158 HV • DIN 51524 HVLP

EQUIVIS ZS Mineral • Hydraulic systems operating outdoors. • Extension of oil drain intervals due to very good thermal stability and resistance to oxidation.

• Very good filterability even in the presence of water.

15 to 100 • ISO 11158 HV • DIN 51524-3 HVLP Vickers • Cincinnati-Milacron• P68, P69, P70

GLACELF AUTO SUPRA

Antifreeze concentrate

• Diesel industrial engines of all sizes. • Long life organic additives technology.• High antifreeze protection.


GLACELF SUPRA Antifreeze concentrate

• Diesel industrial engines, gas engines of all sizes. • Long life. • AFNOR NF R 15-601• ASTM D 3306,D 4656, D 4985• BS 6580 • SAE J 1034 MWM (Deutz)• GE Jenbacher • Rolls-Royce • MTU

HYDRANSAFE FR EHC

Phosphate-esters based fire resistant fluid

• Operating temperature : -10°C to +70°C on a continuous basis +150°C at peak periods.

• Designed for electro hydraulic control system.

• Excellent fire resistance.• Absence of deposits.• Protection against corrosion.

3246

• ISO 6743-4 HFDR • ISO 12922• ALSTOM • General Electric • SIEMENS

HYDRANSAFE HFDU Esters basaed fire resistant fluid

• Recommended in the event of incidental leaks into the environment.

• Excellent fire resistance.• Operating temperature : -10°C to +70°C on a continuous basis,

+120°C at peak periods.

• Ultimate biodegradibility (OECD 301B).• Excellent anti-wear properties.• Miscible with mineral oils.

46 to 68 • ISO 6743-4 HFDU• Factory Mutual

ISOVOLTINE II Naphthenicmineral oil (uninhibited)

• For transformers, circuit breakers, contractors and all high-voltage equipment.

• High insulating power.• Very high resistance to oxidation enabling a considerable service

life.• Excellent cooling properties.

10 • IEC 60296:2012 – Uninhibited

ISOVOLTINE II-T Naphthenicmineral oil(trace inhibited)

• High insulating power.• Contains traces of inhibitor to improve oxidation resistance.• Good cooling properties.

8,2 • IEC 60296:2012 – Trace inhibited• ASTM D 3487 Type I

ISOVOLTINE II X Naphthenicmineral oil (inhibited)


• High insulating power.• Contains inhibitor to ensure a better resistance to oxidation.• Good cooling properties.

10 • IEC 60296:2012 – Inhibited

ISOVOLTINE P1 Paraffinic mineral(trace inhibited)

• Does not contain sulfur.• Good oxidation resistance.• Excellent stray gassing performance.

7,7 • IEC 60296: 2012 – Trace inhibited• ASTM D 3487 Type I fluide

ISOVOLTINE P2 Paraffinic mineral(inhibited)

• Does not contain sulfur.• Superior oxidation resistance.• Excellent stray gassing performance.

7,7 • IEC 60296:2012 – Inhibited• ASTM D 3487 Type II fluide

ISOVOLTINE BIO Synthetic estersbiodegradable oil

• Transformers• Highly recommended to reduce fire hazards (mining, integrated

transformers).

• Biodegradable oil.• Risk of fire minimized.• No danger for aquatic envrionment.

26 • IEC 61099 • IEC 61039 - K3 Class• OECD 301B • NWG

ISOVOLTINE BIO VE Vegetable oil • Transformers.• Highly recommended to reduce fire hazards (mining, integrated

transformers).

• Readily biodegradable.• Optimum fire resistance.• Higher Water absorption extending insulating paper lifetime.

39 • IEC 62770 • IEC 61039 - K2 Class• OECD 301B

MULTIS COMPLEX EP 2

Complex Lithium • Extreme Pressure, multipurpose grease suitable for wheel bearings, ball bearings, roller bearings, plain bearings, seal.

• Excellent mechanical and thermal stabilities.• Minimized downtime and maintenance cost.

165 • ISO 6743-9 L-XBEHB 2• DIN 51502 KP2K-20

MULTIS COMPLEX EP 3

165 • ISO 6743-9 L-XBEHB 3• DIN 51502 KP3N-20

MULTIS COMPLEX HV2

• Extreme pressure, multipurpose grease suitable for heavily loaded applications for roller wheel bearings, ball bearings, roller bearings, plain bearings, seal.

• Excellent mechanical and thermal stability.• Minimized downtime and maintenance cost.

340 • ISO 6743-9 L-XBEHB 2 • DIN 51502 KP2K-20

MULTIS COMPLEX SHD 100

• Extreme Pressure synthetic grease particularly suited for high speed bearings application such as electric motors.

• Outstanding low and high temperature performances.• Improved mechanical efficiency.• Long service life.

100 • ISO 6743-9 L-XEEHB 2• DIN 51502 KP2P-50


• High performance synthetic grease allowing outstanding protection of slow speed, heavily loaded bearings over a wide temperature range recommended in Paper industry.

• Outstanding low and high temperature performances.• Improved mechanical efficiency. • Long service life.

460 • ISO 6743-9 L-XEEHB 1/2• DIN 51502 KP1/2P-40

MULTIS EP 000 Lithium / Calcium

• Grease for centralized lubrication system and enclosed gears.• Good pumpability.• Long service life thanks to the good resistance of the

lubricating film.

150 • ISO 6743-9 L-XCBEB 000• DIN 51502 GP000G-30

MULTIS EP 00 • ISO 6743-9 L-XCBEB 00• DIN 51502 GP00G-30

MULTIS EP 0 • ISO 6743-9 L-XCBEB 0• DIN 51502 MP0K-30


• Extreme Pressure, multipurpose grease for a wide range of industrial and automotive applications.

• Enables to rationalize stocks and simplify maintenance operations.

150 • ISO 6743-9 L-XCBEB 1• DIN 51502 KP1K-30

MULTIS EP 2 • ISO 6743-9 L-XCBEB 2• DIN 51502 KP1K-25


NATERIA MH 40 MineralAsh content < 0,5 %TBN : 5,5

• Natural gas engines. Can be used in cogeneration. • Long life oil.• Compatibility with catalytic converters.

40 • GE-JENBACHER: TA 1000-1109, Caterpillar: series 3500• CES/MWM: sulphate ash content up to 0,5 wt.% • Perkins: 4000 • Waukesha: APG 2000/3000• Wärtsilä: 220 SG • MTU: natural gas • MAN - natural gas

NATERIA MJ 40 Premium mineralAsh content < 1 %TBN : 8,8

• Natural gas and biogas engines : water treatment plants, liquid manure, agriwaste, landfill.

• Long life oil.• Reinforced detergency.

40 • GE-JENBACHER: TA 1000-1109• CES/MWM: sulphate ash content up to 1 wt.%• MTU biogas • MAN - special gas

PRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

PRODUCT CATALOG PRODUCT CATALOGPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

24

DACNIS Mineral • Rotary and reciprocating air compressors. • Moderate conditions.• Discharge temperature up to 80°C.

• Optimal performance.• Excellent protection of your equipment.• Extension of the oil drain intervals, recommended at 2 000 hours.• Improved life cycle of filters and separators.• Significant savings on maintenance costs.

32 to 150 32 to 68 grades: • ISO 6743-3 DAH • ISO DP 6521 100 and 150 grades: • ISO 6743-3 DAB • DIN 51 506 VDL Bauer • CompAir • Dresser-Rand • Sauer & Sohn• Sulzer Burckhardt...

DACNIS LD Hydrocracked mineral oil

• Rotary screw-type air compressors. • Oil drain interval 4 000 hours.• Low pour point.

32 to 68 • ISO 6743-3 DAJ • ISO DP 6521• DIN 51 506 VDL Atlas Copco • CompAir• Hydrovane • Dresser-Rand...

DACNIS LPG 150 Synthetic PAG • Hydrocarbon gas compressors. • Resistant to dilution by hydrocarbon gases.• Excellent chemical stability.

150 • ISO 6743-3: DGC• Sulzer-Burckhardt • Howden • Aerzen

DACNIS SH Synthetic PAO • Rotary screw-type air compressors. • Oil drain intervals 8 000 hours.• Very low pour point.

32 to 100 • ISO 6743-3 DAJ• ISO DP 6521 Atlas Copco • Hydrovane• CompAir • Dresser-Rand...

DISOLA M Mineral • Lubricant designed for medium and high-speed engines running on distillate fuel oils and biofuels of for dual-fuel engines running on distillate fuels.

• Reduced build-up of deposits.• Keeps cold parts of the engine clean.• Extreme pressure properties to maintain oil film. • Reduced engine component wear.

SAE 30 and SAE 40 • Disola M range has been developed and approved by medium and high-speed engines motorists.

EQUIVIS AF Hydrocracked mineral oil

• Hydraulic systems operating outdoors. • Extension of oil drain intervals.• Improved shear stability.

32 to 68 • ISO 11158 HV • DIN 51524 HVLP

EQUIVIS ZS Mineral • Hydraulic systems operating outdoors. • Extension of oil drain intervals due to very good thermal stability and resistance to oxidation.

• Very good filterability even in the presence of water.

15 to 100 • ISO 11158 HV • DIN 51524-3 HVLP Vickers • Cincinnati-Milacron• P68, P69, P70

GLACELF AUTO SUPRA

Antifreeze concentrate

• Diesel industrial engines of all sizes. • Long life organic additives technology.• High antifreeze protection.


GLACELF SUPRA Antifreeze concentrate

• Diesel industrial engines, gas engines of all sizes. • Long life. • AFNOR NF R 15-601• ASTM D 3306,D 4656, D 4985• BS 6580 • SAE J 1034 MWM (Deutz)• GE Jenbacher • Rolls-Royce • MTU

HYDRANSAFE FR EHC

Phosphate-esters based fire resistant fluid

• Operating temperature : -10°C to +70°C on a continuous basis +150°C at peak periods.

• Designed for electro hydraulic control system.

• Excellent fire resistance.• Absence of deposits.• Protection against corrosion.

3246

• ISO 6743-4 HFDR • ISO 12922• ALSTOM • General Electric • SIEMENS

HYDRANSAFE HFDU Esters basaed fire resistant fluid

• Recommended in the event of incidental leaks into the environment.

• Excellent fire resistance.• Operating temperature : -10°C to +70°C on a continuous basis,

+120°C at peak periods.

• Ultimate biodegradibility (OECD 301B).• Excellent anti-wear properties.• Miscible with mineral oils.

46 to 68 • ISO 6743-4 HFDU• Factory Mutual

ISOVOLTINE II Naphthenicmineral oil (uninhibited)


• High insulating power.• Very high resistance to oxidation enabling a considerable service

life.• Excellent cooling properties.

10 • IEC 60296:2012 – Uninhibited

ISOVOLTINE II-T Naphthenicmineral oil(trace inhibited)

• High insulating power.• Contains traces of inhibitor to improve oxidation resistance.• Good cooling properties.

8,2 • IEC 60296:2012 – Trace inhibited• ASTM D 3487 Type I

ISOVOLTINE II X Naphthenicmineral oil (inhibited)


• High insulating power.• Contains inhibitor to ensure a better resistance to oxidation.• Good cooling properties.

10 • IEC 60296:2012 – Inhibited

ISOVOLTINE P1 Paraffinic mineral(trace inhibited)

• Does not contain sulfur.• Good oxidation resistance.• Excellent stray gassing performance.

7,7 • IEC 60296: 2012 – Trace inhibited• ASTM D 3487 Type I fluide

ISOVOLTINE P2 Paraffinic mineral(inhibited)

• Does not contain sulfur.• Superior oxidation resistance.• Excellent stray gassing performance.

7,7 • IEC 60296:2012 – Inhibited• ASTM D 3487 Type II fluide

ISOVOLTINE BIO Synthetic estersbiodegradable oil

• Transformers• Highly recommended to reduce fire hazards (mining, integrated

transformers).

• Biodegradable oil.• Risk of fire minimized.• No danger for aquatic envrionment.

26 • IEC 61099 • IEC 61039 - K3 Class• OECD 301B • NWG

ISOVOLTINE BIO VE Vegetable oil • Transformers.• Highly recommended to reduce fire hazards (mining, integrated

transformers).

• Readily biodegradable.• Optimum fire resistance.• Higher Water absorption extending insulating paper lifetime.

39 • IEC 62770 • IEC 61039 - K2 Class• OECD 301B

MULTIS COMPLEX EP 2

Complex Lithium • Extreme Pressure, multipurpose grease suitable for wheel bearings, ball bearings, roller bearings, plain bearings, seal.

• Excellent mechanical and thermal stabilities.• Minimized downtime and maintenance cost.

165 • ISO 6743-9 L-XBEHB 2• DIN 51502 KP2K-20

MULTIS COMPLEX EP 3

165 • ISO 6743-9 L-XBEHB 3• DIN 51502 KP3N-20

MULTIS COMPLEX HV2

• Extreme pressure, multipurpose grease suitable for heavily loaded applications for roller wheel bearings, ball bearings, roller bearings, plain bearings, seal.

• Excellent mechanical and thermal stability.• Minimized downtime and maintenance cost.

340 • ISO 6743-9 L-XBEHB 2 • DIN 51502 KP2K-20


• Extreme Pressure synthetic grease particularly suited for high speed bearings application such as electric motors.

• Outstanding low and high temperature performances.• Improved mechanical efficiency.• Long service life.

100 • ISO 6743-9 L-XEEHB 2• DIN 51502 KP2P-50


• High performance synthetic grease allowing outstanding protection of slow speed, heavily loaded bearings over a wide temperature range recommended in Paper industry.

• Outstanding low and high temperature performances.• Improved mechanical efficiency. • Long service life.

460 • ISO 6743-9 L-XEEHB 1/2• DIN 51502 KP1/2P-40


• Grease for centralized lubrication system and enclosed gears.• Good pumpability.• Long service life thanks to the good resistance of the

lubricating film.

150 • ISO 6743-9 L-XCBEB 000• DIN 51502 GP000G-30

MULTIS EP 00 • ISO 6743-9 L-XCBEB 00• DIN 51502 GP00G-30

MULTIS EP 0 • ISO 6743-9 L-XCBEB 0• DIN 51502 MP0K-30


• Extreme Pressure, multipurpose grease for a wide range of industrial and automotive applications.

• Enables to rationalize stocks and simplify maintenance operations.

150 • ISO 6743-9 L-XCBEB 1• DIN 51502 KP1K-30



NATERIA MH 40 MineralAsh content < 0,5 %TBN : 5,5

• Natural gas engines. Can be used in cogeneration. • Long life oil.• Compatibility with catalytic converters.

40 • GE-JENBACHER: TA 1000-1109, Caterpillar: series 3500• CES/MWM: sulphate ash content up to 0,5 wt.% • Perkins: 4000 • Waukesha: APG 2000/3000• Wärtsilä: 220 SG • MTU: natural gas • MAN - natural gas

NATERIA MJ 40 Premium mineralAsh content < 1 %TBN : 8,8

• Natural gas and biogas engines : water treatment plants, liquid manure, agriwaste, landfill.

• Long life oil.• Reinforced detergency.

40 • GE-JENBACHER: TA 1000-1109• CES/MWM: sulphate ash content up to 1 wt.%• MTU biogas • MAN - special gas

PRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

PRODUCT CATALOG PRODUCT CATALOGPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

24

NATERIA ML 406 MineralAsh content < 1 %TBN : 6,1

• Landfill gas engines with a controlled H2S content. • Long life oil.• Neutralization of the acid compounds contained in the gas.

40 • GE-JENBACHER: TA 1000-1109

NATERIA MP 40 MineralAsh content < 0,5 %TBN : 4,6

• Natural gas engines, operating under severe conditions. • Very long life oil.• High-performing under severe conditions.

40 • GE-JENBACHER: TA 1000-1109, Caterpillar: series 3500• CES/MWM: sulphate ash content up to 0.5 wt.%• ROLLS-ROYCE: KG & BV-G • MTU: natural & biogas,

BR 400 & 4000 • MAN - natural gas

NATERIA MP 50 Premium mineralAsh content < 0,5 %TBN : 4,6

• Natural gas engines, performing under severe conditions. • Long life oil.• High-performing under severe conditions. • Specially developed for 20V35/44G MAN engines operating at

high temperatures.

50 • MAN 20V35/44G - natural gas

NATERIA MX 40 Semi-syntheticAsh content < 0,5 %TBN : 7,2

• Natural gas engines, operating under very severe conditions. • Oil Drain interval Extension : 40%.• Strongly improved detergency and recudes varnish at high

temperatures.

40

NATERIA V 40 Mineral Ashless • 2-stroke and 4-stroke gas engines and motor-comprepssors. • Compatibility with catalytic converters. 40 • MIL-L-2104A Clark • Cooper-Bessemer• Ingersoll-Rand KVS

NATERIA X 405 Synthetic PAOAsh content < 0,5 %TBN : 5,2

• Natural gas engines, operating under very severe conditions. • Extra long life oil.• Increased yield due to very considerable reduction in the

formation of deposits on the heat exchanger tubes.

40 • Wärtsilä: 220 SG, 25 SG, 28 SG, 34 SG, 32 DF, 50 DF• Waukesha: APG 2000/3000

PRESLIA Mineral • Hydraulic turbines.• Steam turbines.• Gas turbines.• Centrifugal compressor.

• Very good defoaming, air release and demulse properties.• High level of protection against oxidation.

32 to 100 • ISO 6743-5 THA/THE/TSA/TSE/TGA/TGB/TGE/ TGSB • ISO 8068 (ISO VG 32 & 46) - DIN 51515 • (ISO VG 32 & 46) - ASTM D 4304 typeI & II • JIS K-2213 type 2 w/add – GB 11120-89 L-TSA• ALSTOM HTGD 90117• ALSTOM HYDRO HTWT 600050• General Electric GEK 28143B, GEK 32568G, GEK 27070,

GEK 46506E• MAN Diesel &Turbo SPD10000494596• MAN Turbo SPD 10000242284• Siemens TLV 901304, TLV 901305• Solar ES 9-224 W Class II

PRESLIA EVO Hydrocracked mineral

• For modern gas turbines opearting under high thermal stress or peaking.

• Combined-cycle turbines.

• Avoid varnish and depostis formation.• Ensure the cleanliness of critical components such as bearings

and servovalves.• Improve turbine reliability.• Protect turbines equipped with gearbox thanks to heavy load

resistance.

32 to 46 • ISO 6743-5 THA/THE/TSA/TSE/TGA/TGB/TGE/ TGSB • ISO 8068 (ISO VG 32 & 46) - DIN 51515 (ISO VG 32 & 46) • ASTM D 4304 typeI & II - JIS K-2213 type 2 w/add –

GB 11120-89 L-TSA • General Electric GEK 27070, GEK 28143B, GEK 46506E,

GEK 32568J,GEK 107395A, GEK 101941A• MAN Diesel &Turbo SPD10000494596• Siemens TLV 901304, TLV 901305 (ongoing)

PRESLIA GT Hydrocracked mineral oil

• Steam turbines.• Gas turbines.• Combined-cycle turbines.

• Very high resistance to oxidation. • Reinforced anti-wear and extreme pressure additivation. • Longer oil intervals.

32 to 46 • ISO 6743-5 TSA/TSE/TGA/TGB/TGE/TGSB/TGSE• ISO 8068 - DIN 51515 - ASTM D 4304 type I & II - JIS

K-2213 type 2 w/add – GB 11120-89 L-TSA• ALSTOM HTGD 90117• General Electric GEK 28143B, GEK 32568G, GEK• 107395A, GEK 101941A, GEK 27070, GEK 46506 E • MAN Turbo SPD 10000494596• Siemens TLV 901304, TLV 901305• Škoda turbíny Plzen • Solar ES 9-224 W Class II

PRESLIA SE JET Synthetic ester • Aero-derivative gas turbines. • Excellent resistance at high temperatures. 25 • MIL-PRF-23699F• Allison Rolls Royce (USA) • General Electric• Rolls Royce (UK) • Turbomeca

TOTAL RUBIA MT Mineral • 4-stroke Diesel engines used in railway and in stationary engines. • Excellent detergent and dispersant power, preventing formation of deposits inside the engine.

• Remarkable anti-wear and anti-corrosion capabilities ensure engine longevity.

• Great protection against oxidation.• High alkalinity reserve to neutralize the acids formed by the

combustion of a high sulfur gas oil (up to 0.5% S).

SAE 30-40 International specifications ACEA E7 API CH-4 / CG-4 / CF-4 / CF Manufacturer approvals• MAN M 3275-2• MTU Category 2 (TBN> 12)Meets the requirements of• ABC series DX / DZ• Caterpillar 3116/3126 MUI engines• Deutz / MWM medium and large engines• Wartsila-Poyaud UD series• Mitsubishi semi-fast U-engines

TOTAL RUBIA S Mineral • Stationary diesel engines. • Excellent resistance to oxidation.• Prevents formation of deposits inside the engine.• Very good anti-wear properties.

SAE 30, 40 and 50 International specifications:API CF / SF • TBN = 11

TOTAL RUBIA ST Mineral • Diesel engines turbo-charged or not, using a high sulfur diesel fuel.

• Very effective detergency and dispersivity to keep the engine clean.• Very high TBN for the neutralization of Sulfur-based combustion

acids.• Very stable viscosity in operation.

SAE 30 and 40 International specifications: API CF TBN = 15 TBN = 20


Mineral • Lubricant dedicated to construction machinery engines and generators.

• Highly resistant to extreme operating conditions in dusty environments and under heavy loads.

15W-40 International specifications • ACEA E7/E5 API CI-4/CH-4/CF/SL JASO DH-1 (Approved)) Manufacturer approvals• CUMMINS CES 20078/20077/20076 • DEUTZ DQC III-10 • MTU Category 2Meets the requirements of• CATERPILLAR ECF-2 / ECF-1a



• A high-tech lubricant, providing the costs savings due to a significant reduction in diesel fuel consumption.

15W-30 International specifications• API CH-4 API CI-4 / ACEA E5 ACEA E7 / JASO DH-1 * Manufacturer approvals • CUMMINS CES 20076/20077/20078, DEUTZ DQC III-10,

MTU Category 2Meets the requirements of • CATERPILLAR ECF-2 / ECF-1a specifications


Synthetic technology

• Lubricant dedicated to construction machinery engines and generators.

• Excellent thermal stability• The “low-SAPS“ formulation helps to prevent clogging of

particulate filters (DPFs) and extends the life of post-treatment systems.

10W-40 International specifications • ACEA E6 / E9 / E4-99 / E7 API CI-4Manufacturer approvals• CUMMINS CES 20081, DEUTZ DQC IV-10 LA, MTU Category 3.1Meets the requirements of • CATERPILLAR ECF-1a


Mineral • Lubricant dedicated to the construction machinery engines and generators equipped with exhaust gas treatment system (DPF,SCR...)

• Especially suitable for the latest generation engines up to the US EPA TIER IVfinal or EURO Phase IV standards.

15W-40 International specifications • ACEA E9 / E7; API CK-4 / CJ-4 / CJ-4 +; JASO DH-2

(Approved)Manufacturer approvals• CUMMINS CES 20086/20081, DEUTZ DQC III-10 LA and

MTU Cat 2.1 Meets the requirements of • CATERPILLAR ECF-3 / ECF-2 specifications

TALUSIA Mineral • Cylinder oil for slow-speed 2-stroke engines. • Minimized piston ring and liner wear.• Maximized level of cleanliness.• Reduced engine maintenance costs.• Extended periods between overhauls.• Prevent corrosive wear.• Avoid formation of deposits and protects against scuffing.• Allows for the safe optimization of feed rates.

SAE 50 • MAN Diesel & Turbo, Wartsila• WinGD, MHI-MME

WT SUPRA Aqueous concentrate of specific organic corrosion and cavitation inhibitors

• Diesel industrial engines and gas engines requiring no antifreeze protection.

• Long life anti-corrosion and anticavitation protection.• Optimal heat transfer capacity. Non-polluting components.

• MWM (Deutz)• Wärtsilä• Rolls-Royce: Bergen• GE Jenbacher

PRODUCT CATALOG PRODUCT CATALOGPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONSPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

26

NATERIA ML 406 MineralAsh content < 1 %TBN : 6,1

• Landfill gas engines with a controlled H2S content. • Long life oil.• Neutralization of the acid compounds contained in the gas.

40 • GE-JENBACHER: TA 1000-1109

NATERIA MP 40 MineralAsh content < 0,5 %TBN : 4,6

• Natural gas engines, operating under severe conditions. • Very long life oil.• High-performing under severe conditions.

40 • GE-JENBACHER: TA 1000-1109, Caterpillar: series 3500• CES/MWM: sulphate ash content up to 0.5 wt.%• ROLLS-ROYCE: KG & BV-G • MTU: natural & biogas,

BR 400 & 4000 • MAN - natural gas

NATERIA MP 50 Premium mineralAsh content < 0,5 %TBN : 4,6

• Natural gas engines, performing under severe conditions. • Long life oil.• High-performing under severe conditions. • Specially developed for 20V35/44G MAN engines operating at

high temperatures.

50 • MAN 20V35/44G - natural gas

NATERIA MX 40 Semi-syntheticAsh content < 0,5 %TBN : 7,2

• Natural gas engines, operating under very severe conditions. • Oil Drain interval Extension : 40%.• Strongly improved detergency and recudes varnish at high

temperatures.

40

NATERIA V 40 Mineral Ashless • 2-stroke and 4-stroke gas engines and motor-comprepssors. • Compatibility with catalytic converters. 40 • MIL-L-2104A Clark • Cooper-Bessemer• Ingersoll-Rand KVS

NATERIA X 405 Synthetic PAOAsh content < 0,5 %TBN : 5,2

• Natural gas engines, operating under very severe conditions. • Extra long life oil.• Increased yield due to very considerable reduction in the

formation of deposits on the heat exchanger tubes.

40 • Wärtsilä: 220 SG, 25 SG, 28 SG, 34 SG, 32 DF, 50 DF• Waukesha: APG 2000/3000

PRESLIA Mineral • Hydraulic turbines.• Steam turbines.• Gas turbines.• Centrifugal compressor.

• Very good defoaming, air release and demulse properties.• High level of protection against oxidation.

32 to 100 • ISO 6743-5 THA/THE/TSA/TSE/TGA/TGB/TGE/ TGSB • ISO 8068 (ISO VG 32 & 46) - DIN 51515 • (ISO VG 32 & 46) - ASTM D 4304 typeI & II • JIS K-2213 type 2 w/add – GB 11120-89 L-TSA• ALSTOM HTGD 90117• ALSTOM HYDRO HTWT 600050• General Electric GEK 28143B, GEK 32568G, GEK 27070,

GEK 46506E• MAN Diesel &Turbo SPD10000494596• MAN Turbo SPD 10000242284• Siemens TLV 901304, TLV 901305• Solar ES 9-224 W Class II

PRESLIA EVO Hydrocracked mineral

• For modern gas turbines opearting under high thermal stress or peaking.

• Combined-cycle turbines.

• Avoid varnish and depostis formation.• Ensure the cleanliness of critical components such as bearings

and servovalves.• Improve turbine reliability.• Protect turbines equipped with gearbox thanks to heavy load

resistance.

32 to 46 • ISO 6743-5 THA/THE/TSA/TSE/TGA/TGB/TGE/ TGSB • ISO 8068 (ISO VG 32 & 46) - DIN 51515 (ISO VG 32 & 46) • ASTM D 4304 typeI & II - JIS K-2213 type 2 w/add –

GB 11120-89 L-TSA • General Electric GEK 27070, GEK 28143B, GEK 46506E,

GEK 32568J,GEK 107395A, GEK 101941A• MAN Diesel &Turbo SPD10000494596• Siemens TLV 901304, TLV 901305 (ongoing)

PRESLIA GT Hydrocracked mineral oil

• Steam turbines.• Gas turbines.• Combined-cycle turbines.

• Very high resistance to oxidation. • Reinforced anti-wear and extreme pressure additivation. • Longer oil intervals.

32 to 46 • ISO 6743-5 TSA/TSE/TGA/TGB/TGE/TGSB/TGSE• ISO 8068 - DIN 51515 - ASTM D 4304 type I & II - JIS

K-2213 type 2 w/add – GB 11120-89 L-TSA• ALSTOM HTGD 90117• General Electric GEK 28143B, GEK 32568G, GEK• 107395A, GEK 101941A, GEK 27070, GEK 46506 E • MAN Turbo SPD 10000494596• Siemens TLV 901304, TLV 901305• Škoda turbíny Plzen • Solar ES 9-224 W Class II

PRESLIA SE JET Synthetic ester • Aero-derivative gas turbines. • Excellent resistance at high temperatures. 25 • MIL-PRF-23699F• Allison Rolls Royce (USA) • General Electric• Rolls Royce (UK) • Turbomeca

TOTAL RUBIA MT Mineral • 4-stroke Diesel engines used in railway and in stationary engines. • Excellent detergent and dispersant power, preventing formation of deposits inside the engine.

• Remarkable anti-wear and anti-corrosion capabilities ensure engine longevity.

• Great protection against oxidation.• High alkalinity reserve to neutralize the acids formed by the

combustion of a high sulfur gas oil (up to 0.5% S).

SAE 30-40 International specifications ACEA E7 API CH-4 / CG-4 / CF-4 / CF Manufacturer approvals• MAN M 3275-2• MTU Category 2 (TBN> 12)Meets the requirements of• ABC series DX / DZ• Caterpillar 3116/3126 MUI engines• Deutz / MWM medium and large engines• Wartsila-Poyaud UD series• Mitsubishi semi-fast U-engines

TOTAL RUBIA S Mineral • Stationary diesel engines. • Excellent resistance to oxidation.• Prevents formation of deposits inside the engine.• Very good anti-wear properties.

SAE 30, 40 and 50 International specifications:API CF / SF • TBN = 11

TOTAL RUBIA ST Mineral • Diesel engines turbo-charged or not, using a high sulfur diesel fuel.

• Very effective detergency and dispersivity to keep the engine clean.• Very high TBN for the neutralization of Sulfur-based combustion

acids.• Very stable viscosity in operation.

SAE 30 and 40 International specifications: API CF TBN = 15 TBN = 20



• Highly resistant to extreme operating conditions in dusty environments and under heavy loads.

15W-40 International specifications • ACEA E7/E5 API CI-4/CH-4/CF/SL JASO DH-1 (Approved)) Manufacturer approvals• CUMMINS CES 20078/20077/20076 • DEUTZ DQC III-10 • MTU Category 2Meets the requirements of• CATERPILLAR ECF-2 / ECF-1a



• A high-tech lubricant, providing the costs savings due to a significant reduction in diesel fuel consumption.

15W-30 International specifications• API CH-4 API CI-4 / ACEA E5 ACEA E7 / JASO DH-1 * Manufacturer approvals • CUMMINS CES 20076/20077/20078, DEUTZ DQC III-10,

MTU Category 2Meets the requirements of • CATERPILLAR ECF-2 / ECF-1a specifications


Synthetic technology

• Lubricant dedicated to construction machinery engines and generators.

• Excellent thermal stability• The “low-SAPS“ formulation helps to prevent clogging of

particulate filters (DPFs) and extends the life of post-treatment systems.

10W-40 International specifications • ACEA E6 / E9 / E4-99 / E7 API CI-4Manufacturer approvals• CUMMINS CES 20081, DEUTZ DQC IV-10 LA, MTU Category 3.1Meets the requirements of • CATERPILLAR ECF-1a


Mineral • Lubricant dedicated to the construction machinery engines and generators equipped with exhaust gas treatment system (DPF,SCR...)

• Especially suitable for the latest generation engines up to the US EPA TIER IVfinal or EURO Phase IV standards.

15W-40 International specifications • ACEA E9 / E7; API CK-4 / CJ-4 / CJ-4 +; JASO DH-2

(Approved)Manufacturer approvals• CUMMINS CES 20086/20081, DEUTZ DQC III-10 LA and

MTU Cat 2.1 Meets the requirements of • CATERPILLAR ECF-3 / ECF-2 specifications

TALUSIA Mineral • Cylinder oil for slow-speed 2-stroke engines. • Minimized piston ring and liner wear.• Maximized level of cleanliness.• Reduced engine maintenance costs.• Extended periods between overhauls.• Prevent corrosive wear.• Avoid formation of deposits and protects against scuffing.• Allows for the safe optimization of feed rates.

SAE 50 • MAN Diesel & Turbo, Wartsila• WinGD, MHI-MME

WT SUPRA Aqueous concentrate of specific organic corrosion and cavitation inhibitors

• Diesel industrial engines and gas engines requiring no antifreeze protection.

• Long life anti-corrosion and anticavitation protection.• Optimal heat transfer capacity. Non-polluting components.

• MWM (Deutz)• Wärtsilä• Rolls-Royce: Bergen• GE Jenbacher

PRODUCT CATALOG PRODUCT CATALOGPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONSPRODUCT NATURE APPLICATION SPECIFIC ADVANTAGES VISCOSITY SPECIFICATIONS

26

References & OEMsTOTAL Lubricants cooperates with

equipment manufacturers to createhigh-technology products for optimal

performance and protection of your machinery.

Quality and environmentTOTAL Lubricants ISO 9001 certification is theguarantee of a long term commitmentto quality. From the initial design stage, our R&Dteams seek to develop products that minimizetoxicity risks and environmental impact.

Innovation & ResearchTOTAL invests in biotechnologies to findthe most suitable components to reach

energy efficiency through formulationsdesigned in our Research Centers.

Support and partnershipThanks to local technical presence, we provide a high level of service to optimize yourTotal cost of Ownership.

A major playerWith our production, supply chain

and commercial presencein more than 150 countries,

we deliver a full range of lubricants.

good reasons for choosing TOTAL

10/2

018

-Tot

al L

ubrifi

ants

SA

552

006

454

RC

S N

ante

rre

- P

hoto

s: Is

tock

, Ad

obe

Sto

ck, S

ourc

e in

tern

e To

tal -

Des

ign:

MA

NIT

OB

A.

Safety Data Sheets are available at quickfds.com

total.fr/pro