Upload
ziya-2009
View
244
Download
4
Embed Size (px)
Citation preview
8/18/2019 Lte Channel Structure
1/57
Jaeho, Lee
Distribution
EnglishED01
Customer Training Center
http://www.samsung.co.kr/
8/18/2019 Lte Channel Structure
2/57
2/62
Contents
Chanel information
Physical channel structure
Basic procedure between eNB and UE
8/18/2019 Lte Channel Structure
3/57
3/62
Chanel information
8/18/2019 Lte Channel Structure
4/57
4/62
LTE/SAE Architecture
eNB
MME / S-GW MME / S-GW
eNB
eNB
S 1
S 1
S 1
S 1
X2
X 2X 2
E-UTRAN
SAE (System Architecture Evolution)
SAE = LTE packet core Network
(Evolved Packet Core : EPC)
LTE = evolved UMTS Radio Access Network
LTE (Long Term Evolution)
Use flat architecture without specific
radio network controller
LTE Base station = eNB
(eNB = „evolved‟ node B)
8/18/2019 Lte Channel Structure
5/57
5/62
PDCP/RLC/MAC sublayers terminated in eNB on the network side
User Plane Protocol Stack
eNB
PHY
UE
PHY
MAC
RLC
MAC
PDCPPDCP
RLC
Header compressionIn-sequency delivery at handover
Duplicate detectionCiphering for user/control plane
Integrity protection for control plane
AM/UM/TMARQ
(Re-)segmentationConcatenation
In-sequence deliveryDuplicate detection
Logical - transport channel mappingMultiplexing/demultiplexingTraffic volume measurement
HARQPriority handling
Transport format selection
* PDCP : Packet Data Convergence ProtocolRLC : Radio Link ControlMAC : Medium Access Control(H)ARQ : (Hybrid) Automatic Repeat Request
8/18/2019 Lte Channel Structure
6/57
6/62
Control Plane Protocol Stack
eNB
PHY
UE
PHY
MAC
RLC
MAC
MME
RLC
NAS NAS
RRC RRC
PDCP PDCP
Broadcast, Paging
RRC connection setupRadio bearer controlMobility functions
UE measurement control
EPS bearer managementAuthentication
ECM_IDLE mobility handlingPaging originated in ECM_IDLE
Security Control
* RRC : Radio Resource ControlNAS : Non Access StratumEPS : Evolved Packet SystemECM : EPS Connection Management
8/18/2019 Lte Channel Structure
7/577/62
Layer-2 Structure for Downlink
Segm. ARQ etc
Multiplexing UE1
Segm. ARQ etc
...
HARQ
Multiplexing UEn
HARQ
BCCH PCCH
Scheduling / Priority Handling
Logical Channels
Transport Channels
MAC
RLC Segm. ARQ etc
Segm. ARQ etc
PDCP
ROHC ROHC ROHC ROHC
Radio Bearers
Security Security Security Security
...CCCH
8/18/2019 Lte Channel Structure
8/578/62
Layer-2 Structure for Uplink
Multiplexing
...
HARQ
Scheduling / Priority Handling
Transport Channels
MAC
RLC
PDCP
Segm. ARQ etc
Segm. ARQ etc
Logical Channels
ROHC ROHC
Radio Bearers
Security Security
CCCH
8/18/2019 Lte Channel Structure
9/579/62
Logical Channel/Transport Channel/Physical Channel
Logical channel
Between RLC & MAC
Established per radio bearer
Defined by what kind of information is carried within
Transport channel
Between MAC&PHY
Used to define how traffics are processed (MCS level, TB size, CRC size)
Physical channel
Physical layer for the real transmission
7 types channels
8/18/2019 Lte Channel Structure
10/5710/62
Channel Mapping - Downlink
BCH PCH DL-SCHMCH
Downlink
Physical channels
Downlink
Transport channels
PBCH PDSCHPMCH PDCCH
BCCH PCCH CCCH DCCH DTCH Downlink Logical Channels
System Info. Paging
CommonControl Infoat no RRC
Connection
DedicatedControl
DedicatedTraffic
8/18/2019 Lte Channel Structure
11/5711/62
Channel Mapping - Uplink
Uplink
Physical channels
Uplink
Transport channels
UL-SCH
PUSCH
RACH
PUCCHPRACH
CCCH DCCH DTCH Uplink
Logical Channels
8/18/2019 Lte Channel Structure
12/5712/62
BCCH/BCH/P-BCH
System information (MIB)
No PDCP, RLC TM, transparent MAC
BCCH/DL-SCH/PDSCH
System information (SIBs)
No PDCP, RLC TM, transparent MAC
PCCH/PCH/PDSCH
Paging message
No PDCP, RLC TM, transparent MAC
Logical Channel/Transport Channel/Physical Channel
8/18/2019 Lte Channel Structure
13/5713/62
CCCH/UL(DL)-SCH/PUSCH(PDSCH)
Initial RRC messages, fixed size in UL
Transmitted during random access
No PDCP, RLC TM, Transparent MAC
DCCH/UL(DL)-SCH/PUSCH(PDSCH)
RRC message (including NAS message coming from/going to MME)
PDCP/RLC AM/non-transparent MAC
DTCH/UL(DL)-SCH/PUSCH(PDSCH)
Normal user traffic
PDCP/RLC AM or UM/non-transparent MAC
Logical Channel/Transport Channel/Physical Channel
8/18/2019 Lte Channel Structure
14/5714/62
Example – Attach Procedure
8/18/2019 Lte Channel Structure
15/5715/62
Physical Channels and Signals
Physical Downlink Channel (eNB UE)
PBCH (Physical broadcast channel)
DL bandwidth, system frame number, PHICH configuration transmission
PCFICH (Physical control format indicator channel)
Transmit the number of OFDM symbols with PDCCH on downlink subframe to UE
Transmit every subframe
PDCCH (Physical downlink control channel)
Transmit downlink resource allocation on downlink traffic and paging signal
Transmit Uplink scheduling grant
PDSCH (Physical downlink shared channel)
Transmit downlink traffic and paging signal (eNB -> UE)
PHICH (Physical hybrid ARQ indicator channel)
Transmit ACK/NACK for Uplink data(PUSCH)
8/18/2019 Lte Channel Structure
16/5716/62
Physical Channels and Signals
Physical Uplink Channel (UE eNB)
PUSCH (Physical uplink shared channel)
Transmit uplink traffic
PUCCH (Physical uplink control channel)
Transmit ACK/NACK on Downlink data(PDSCH)
Transmit Scheduling request, downlink channel info.(CQI)
PRACH (Physical random access channel)
Transmit random access preamble when It need Initial access, re-access,requesting UL resources
Signal
Synchronization signal (primary, secondary)
Use it when UE get the synchronization with Base station
DL/UL reference signal
DL CQI measurement and DL / UL channel estimation
UL SRS (Sounding reference signal)
UE is periodically upload to eNB for checking the uplink channel status.
8/18/2019 Lte Channel Structure
17/5717/62
Physical channel structure
8/18/2019 Lte Channel Structure
18/5718/62
DL Frame Structure
8/18/2019 Lte Channel Structure
19/57
19/62
DL Frame Structure
8/18/2019 Lte Channel Structure
20/57
20/62
DL Physical Channels & Signals
Physical channels
A set of Resource Elements carrying information originating from higherlayers
Physical Downlink Shared Channel, PDSCH
Physical Broadcast Channel, PBCH
Physical Multicast Channel, PMCH
Physical Control Format Indicator Channel, PCFICH
Physical Downlink Control Channel, PDCCH
Physical Hybrid ARQ Indicator Channel, PHICH
Physical Signals
A set of Resource Elements NOT carrying information originating fromhigher layers
Reference signal
Synchronization signal
8/18/2019 Lte Channel Structure
21/57
21/62
Downlink Resource Grid
8/18/2019 Lte Channel Structure
22/57
22/62
Downlink Resource Grid
Physical resource block parameters
Number of symbols per slot
Number of RBs
8/18/2019 Lte Channel Structure
23/57
23/62
RS Pattern and Control Channel Region
8/18/2019 Lte Channel Structure
24/57
24/62
Initial Access
LTE Initial access procedure
Cell searchReceive System information
Attach
PowerON
Cell Searchand Selection
Receive SystemInformation Attach
User dataTx/Rx
Initial Access procedure
C S
8/18/2019 Lte Channel Structure
25/57
25/62
Cell Search
Cell search
Find a cell to connect and estimate frame timingProvide the primary and secondary synchronization signals on the
downlink to assist
Cell-specific sequences are inserted in synchronization signals
Support 504 unique physical-layer identities; N IDcell (168 unique physical-
layer cell-identity groups; N ID(1), each group containing three uniqueidentities; N ID
(2))
Physical-layer identity
S h i i Si l (FDD)
8/18/2019 Lte Channel Structure
26/57
26/62
Synchronization Signals (FDD)
PSS (primary synchronization signal)
Estimate 5 msec timing and physical-layer identityChannel estimation information for SSS
SSS (secondary synchronization signal)Physical-layer identity (Cell ID) is obtained
Mapped to one of 168 cell ID groups (168 ID groups for 504 Cell IDs)
Radio-frame timing (10msec) identification
Max # of hypotheses;336 hypotheses (2 for half frame x 168 for ID groups)
D li k R f Si l (RS)
8/18/2019 Lte Channel Structure
27/57
27/62
Downlink Reference Signal (RS)
Three types of downlink reference signal
Cell-specific reference signals, associated with non-MBSFN transmission(unicast RS)
MBSFN reference signals, associated with MBSFN transmission
UE-specific reference signals (Dedicated RS)
C ll ifi R f Si l
8/18/2019 Lte Channel Structure
28/57
28/62
Cell-specific Reference Signal
D di t d RS
8/18/2019 Lte Channel Structure
29/57
29/62
Dedicated RS
Three types of downlink reference signal
UE-specific reference signals are supported for single-antenna-porttransmission of PDSCH (transmitted on antenna port 5)
PBCH
8/18/2019 Lte Channel Structure
30/57
30/62
PBCH
PBCH
Master information block of system informationUse QPSK modulation
System information (14 bits) is included
DL system bandwidth (3 bits)
System frame number (SFN: MSB 8 bits explicit, LSB 2 bits implicit)
PHICH duration (1 bit)
PHICH resource (2 bits)
No explicit bits in PBCH to signal the number of TX antennas at the eNB
(1, 2, or 4)
Transmit 4 subframes with interval time(40 ms)
Transmit every Subframe #0
40 ms timing is blind detection on UE
PCFICH
8/18/2019 Lte Channel Structure
31/57
31/62
PCFICH
Use CFI (control format indicator) Transmission
Information about the number of OFDM symbols used for transmission ofPDCCH in a subframe is included
Transmit first OFDM symbol
The number of OFDM symbols using PDCCH
NRBDL > 10 : 1, 2, 3
NRBDL
8/18/2019 Lte Channel Structure
32/57
32/62
PDCCH
Transmit Scheduling assignment(physical downlink control channel)
Transmit the aggregation of one or several control channel element(CCE)
1 CCE = 9 REGs = 36 REs
1 PDCCH = 1, 2, 4, 8 CCEs
Possible to send several PDCCH in a subframe
PDCCH
8/18/2019 Lte Channel Structure
33/57
33/62
PDCCH
Resource Element Group (REG)
Basic RE mapping unit for downlink control information
PDCCH
8/18/2019 Lte Channel Structure
34/57
34/62
PDCCH
PDCCH
8/18/2019 Lte Channel Structure
35/57
35/62
PDCCH
DCI formats
DCI format 0 : UL-SCH assignments
DCI format 1 : DL-SCH assignments for SIMO operation
DCI format 1A : compact scheduling of one PDSCH codeword and for downlinktransmission of paging, RACH response and dynamic BCCH scheduling
DCI format 1B :used to support closed-loop single-rank transmission withpossibly contiguous resource allocation
DCI format 1C : downlink transmission of paging, RACH response and dynamicBCCH scheduling
DCI format 1D : compact scheduling of one PDSCH codeword with precodingand power offset information
DCI format 2 : scheduling PDSCH to UEs configured in closed-loop spatialmultiplexing mode
DCI format 2A : scheduling PDSCH to UEs configured in open loop spatialmultiplexing mode
DCI format 3 : transmission of TPC commands for PUCCH and PUSCH with 2-bit power adjustments
DCI format 3A : transmission of TPC commands for PUCCH and PUSCH withsingle bit power adjustments
PHICH
8/18/2019 Lte Channel Structure
36/57
36/62
PHICH
Transmit hybrid-ARQ ACK/NACK for PUSCH transmission
PHICH group1 PHICH group = 8 PHICHs (normal CP)
1 PHICH group = 4 PHICHs (extended CP)
The amount of PHICH resource is transmitted with 2 bits of PBCH
N h = 1/6, 1/2, 1, 2
The number of
PHICH group N
PHICH mapping
PHICH
8/18/2019 Lte Channel Structure
37/57
37/62
PHICH
Uplink Numerology
8/18/2019 Lte Channel Structure
38/57
38/62
Uplink Numerology
Number of symbols per slot
Bandwidth and number of RBs
UL
symb N SC-FDMA symbols
One uplink slot slotT
0l 1UL
symb N l
R B
s c
U L
R B
N
N
s u b c a r r i e r s
R B
s c
N
s u b c a r r i e r s
RB
sc
UL
symb N N
Resource block
resource elements
Resource element ),( l k
Uplink Basic Mapping Structure
8/18/2019 Lte Channel Structure
39/57
39/62
Uplink Basic Mapping Structure
Resource block (RB)
PUSCH mapping
Uplink Physical Channels and Signals
8/18/2019 Lte Channel Structure
40/57
40/62
Uplink Physical Channels and Signals
Physical Channels (Uplink)
Physical Uplink Shared Channel (PUSCH)
Physical Uplink Control Channel (PUCCH)
Physical Random Access Channel (PRACH)
Physical Signals (Uplink)Demodulation Reference Signal
Sounding Reference Signal
Mapping of Uplink Physical Channels
8/18/2019 Lte Channel Structure
41/57
41/62
Mapping of Uplink Physical Channels
PUCCH: frequency edge
PUSCH: between PUCCH RBsDemodulation reference signal : center symbol in each slot
Sounding reference signal : last symbol in a subframe
Frequency
Sub-frame
(1ms)
Slot
(0.5ms)
SC-FDMA
symbol
PUSCH
PUSCH RS
SRS
One example configuration for normal CP
PUCCH
RB
SC FDMA for LTE UL
8/18/2019 Lte Channel Structure
42/57
42/62
SC-FDMA for LTE UL
Equivalent to DFT-Precoded OFDMA
Low PAPR It‟s proper to Uplink
Overal l spectrum s ize
Low er symbol rate
Higher symbol rate
PUSCH Transmission
8/18/2019 Lte Channel Structure
43/57
43/62
PUSCH Transmission
Localized transmission Hopping transmission
PUCCH
8/18/2019 Lte Channel Structure
44/57
44/62
PUCCH
Format 1 (SR only with On-off Keying (OOK))
Format 1a and 1b (ACK/NACK only)Format 1a: BPSK ACK/NACK for 1 Codeword
Format 1b: QPSK ACK/NACK for 2 Codewords
Format 2 (CQI only)
Format 2a and 2b (CQI + ACK/NACK)
PUCCH (format 1)
PUCCH (format 1)
PUCCH (format 2)
PUCCH (format 2)
PUSCH
PUCCH format 1
8/18/2019 Lte Channel Structure
45/57
45/62
PUCCH format 1
PUCCH format 1 in RB (normal CP)
Cyclic shifts : 12 EA
Orthogonal cover sequence : 3 EA
Total available PUCCH format 1 resource in 1 RB = 36 EA
Decide available PUCCH format 1 resource as the value of
Ex) = 2 , can be used 18 PUCCH format 1 resources in 1 RB
PUCCH format 2
8/18/2019 Lte Channel Structure
46/57
46/62
PUCCH format 2
PUCCH format 2 resources in RB (normal CP)
Cyclic shifts : 12 EA
No orthogonal cover sequence for PUCCH format 2
Total available PUCCH format 2 resource in 1 RB = 12 EA
Decide available PUCCH format 2 resource as the value of
Ex) = 2, can be used 6 PUCCH format 2 resources in 1 RB
Sounding Reference Signal (SRS)
8/18/2019 Lte Channel Structure
47/57
47/62
Sounding Reference Signal (SRS)
UE is periodically upload to eNB for checking the uplink channelstatus.
Use checking of UL channel status for the bandwidth transmitted SRS to UE.
SRS cell-specific
Configuration
Configuration BinaryConfiguration Period
(subframes)
Transmission offset
(subframes)
0 0000 1 {0}
1 0001 2 {0}
2 0010 2 {1}
3 0011 5 {0}
4 0100 5 {1}
5 0101 5 {2}
6 0110 5 {3}
7 0111 5 {0,1}
8 1000 5 {2,3}
9 1001 10 {0}
10 1010 10 {1}
11 1011 10 {2}
12 1100 10 {3}
13 1101 10 {0,1,2,3,4,6,8}
14 1110 10 {0,1,2,3,4,5,6,8}
15 1111 Inf N/A
Sounding Reference Signal (SRS)
8/18/2019 Lte Channel Structure
48/57
48/62
Sounding Reference Signal (SRS)
SRS transmission bandwidths
Multiple SRS BW trees are predefined for each uplink system operating bandwidth
Cell-specific 3 bits are used to indicate one of 8 SRS BW configurations
One SRS BW configuration has Max. SRS BW and predefined SRS BW trees
UE specific 2 bits are given via higher layers to indicate one of 4 SRSBWs
For each SRS BW configurations, there exist 1~4 SRS BWs
SRS bandwidth configuration and SRS bandwidth for 40~60 RB uplink system BW
SRSbandwidth
configuration
SRSC
SRS-Bandwidth
0SRS B
SRS-Bandwidth
1SRS B
SRS-Bandwidth
2SRS B
SRS-Bandwidth
3SRS B
0SRS,m 0 N 1SRS,m 1 N 2SRS,m 2 N 3SRS,m 3 N
0 48 1 24 2 12 2 4 31 48 1 16 3 8 2 4 2
2 40 1 20 2 4 5 4 1
3 36 1 12 3 4 3 4 1
4 32 1 16 2 8 2 4 2
5 24 1 4 6 4 1 4 1
6 20 1 4 5 4 1 4 1
7 16 1 4 4 4 1 4 1
Sounding Reference Signal (SRS)
8/18/2019 Lte Channel Structure
49/57
49/62
Sounding Reference Signal (SRS)
Configuration Cell-specific SRS
SRS bandwidth configuration
SRS subframe configuration
Report the possibility for simultaneously transmission ACK/NACK and SRS
SRS Configuration per UE
SRS Transmission bandwidth
SRS hopping bandwidth
Cyclic shift
Frequency domain position
Comb
SRS Periods and offset per UE
PRACH Structure
8/18/2019 Lte Channel Structure
50/57
50/62
PRACH Structure
The number of RB for PRACH transmission = 6 RB
Transmit the subframe and frequency offset of PRACH using system information
Preamble format
SequenceCP
CPT SEQT
Preamble format CPT SEQT
0 s3168 T s24576 T
1 s21024 T s24576 T
2 s6240 T s245762 T
3 s21024 T s245762 T
4
(frame structure type 2 only)s448 T s4096 T
DL/UL Subframe Architecture
8/18/2019 Lte Channel Structure
51/57
51/62
DL/UL Subframe Architecture
DL Subframe Architecture
UL Subframe Structure
8/18/2019 Lte Channel Structure
52/57
52/62
Basic procedure betweeneNB and UE
Basic procedure between eNB and UE
8/18/2019 Lte Channel Structure
53/57
53/62
Basic procedure between eNB and UE
The procedure for synchronization and obtaining of system Info.
MIB : system frame number, DL bandwidth, PHICH information are included
SIB : Cell specific information are included for system operation except MIB
information
SIB1: cell access configuration, frequency band indicator, scheduling
information for syst other SIBs and systemInfoValueTag
SIB2: radio configuration information are included (PUCCH, PUSCH, SRS etc)
eNB
UEID 0~2 Cell ID
Group 0~167
Cell ID Detection 0~503
Cell specific RS
(Using cell ID info.)
System
Information (MIB)
System
Information (SIB)
Broadcast Information
PSS SSSDL Reference
Signal PBCH PDSCH
* MIB: Master Information Block
* SIB: System Information Block
Basic procedure between eNB and UE
8/18/2019 Lte Channel Structure
54/57
54/62
Basic procedure between eNB and UE
Call-Access procedure
UE specific resource allocation information in Msg 4 (RRC Connection Setup) are
transmitted
CQI Resorce index, Transmit period and subframe offset
SR Resource index, Transmit period and subframe offset
SRS Transmission bandwidth, Frequency location, comb, cyclic shift
eNB
UEMsg 1
(Random AccessPreamble)
Msg 2(Random Access
Response)
RACH DATA
UL Timing Advance
DATA+Msg 3
allocationinfo.
PDCCH PDSCH
Msg 3(RRC Connection
Request)
DATA
PUSCH
Msg 4(RRC Connection
Setup)
PDCCH PDSCH PDCCH
DATA
PUSCH
Msg 5(RRC ConnectionSetup Complete)
* CQI: Channel Quality Indicator (DL channel Quality index)
* SR: Scheduling Request (Using it when UE reports that UE has transmit data to eNB)
* SRS: Sounding Reference Signal (Using it when UE transmit it periodically for checking uplink-channel status data)
PRACH
Basic procedure between eNB and UE
8/18/2019 Lte Channel Structure
55/57
55/62
Basic procedure between eNB and UE
DL data-Transmission Procedure
UE transmit periodically CQI(channel quality indicator) which is DL channel
status after receiving CQI resource allocation per UE.
eNB allocates PDSCH considering DL channel status of a UE and DL buffer status
Transmit the information of PDSCH allocation per specific subframe withPDCCH.
When CRC is OK on PDSCH detection result in UE, transmit ACK to eNB.
Transmit ACK info. on PUSCH when PUSCH is allocated.
In other cases, Transmit ACK info on PUCCH .
eNB
UEDL CQI Estimation
DATA
PUSCH or PUCCH PDCCH PDSCH PUSCH or PUCCHDL Reference
Signal CQI CQI
DL Scheduling and
Link Adaptation
DL allocation info.
ACK/NACK DATA
PDCCH PDSCH
With there is ACK/NACK or not,
HARQ retransmission or new data transmission
PDSCH Detection
DL allocation info.
Basic procedure between eNB and UE
8/18/2019 Lte Channel Structure
56/57
56/62
Basic procedure between eNB and UE
UL data-Transmission Procedure
UE transmit periodically SRS signal after receiving SRS resource allocation per
UE.
eNB allocates PUSCH resource considering UL channel status of a UE and BSR.
When CRC is OK on PUSCH detection result in UE, transmit ACK to eNB.
Transmit ACK using PHICH (Downlink direction)
eNB
UETransmit SRS periodically0
PUSCH
Transmit
the buffer status of UE
SRS SRS
UL Channel Quality Estimation
PUCCH
SR
PDCCH
UL Scheduling and
Link Adaptation
UL allocation info.
DATA+ BSR
•BSR: Buffer Status Report Transmit the buffer status of uplink data to eNB
PDCCH
UL allocation info.
PHICH
ACK
PUSCH
DATA
HARQ
Basic procedure between eNB and UE
8/18/2019 Lte Channel Structure
57/57
Basic procedure between eNB and UE
Handover Procedure
UE sends measurement report to serving cell with the condition of comparing
Neighbor‟s cell signal and Serving cell signal.
If serving cell transmits “handover command” message to UE, UE orders target
cell to be handover.
After UE receives Handover command, UE will proceed the transmission of
RACH ,Handover procedure, to target cell.
Servingcell
UEMeasurement
Report Transmission
* Handover Command : RRC connection reconfiguration
PUSCH
MR
Targetcell
DL RS
DL RS
HandoverCommand
PDSCH
RACH RAR
PDSCHPUSCH
HandoverComplete
PRACH