2
GASTROENTEROLOGY LOWER GI ENDOSCOPY meets ARTIFICIAL INTELLIGENCE for colonic polyp detection & characterisation DETECTION BOX Displays the area where the suspicious polyp is detected. 1 DETECTION SOUND Sound signal when a suspicious polyp is detected. Volume can be defined for each user. VISUAL ASSIST CIRCLE Lights up in the direction where the suspicious polyp is detected. 2 1 2 VISUAL ASSIST CIRCLE GREEN: Characterisation HYPERPLASTIC YELLOW: Characterisation NEOPLASTIC 2 POSITION MAP Indicates the position of the suspicious area, this software is characterising. 3 CHARACTERISATION RESULT HYPERPLASTIC: hyperplastic polyps & SSL NEOPLASTIC: adenoma and cancer 4 STATUS BAR Indicates the status of characterisation analysis regarding the suspicious area 1 1 1 2 2 3 3 4 4 DETECTION SUPPORT CHARACTERISATION SUPPORT *According to the validation study, the accuracy of non experts with the assistance of CAD EYE Characterisation was equivalent to that of an expert. CAD EYE Detection is aimed to improve the real time polyp detection rate to expert level, helping to recognise flat lesions, multiple polyps simultaneously, as well as any lesions at the corner of the image. CAD EYE Detection is possible with White Light and LCI (Linked Color Imaging) mode. Once a suspected polyp is detected, CAD EYE Characterisation – in combination with BLI – can support endoscopists in the diagnosis of the polyp. This function analyses in real-time and without freezing or zooming if a polyp is hyperplastic or neoplastic, which is visually indicated by the use of different colour codes in the Position Map. CAD EYE Characterisation is aimed to make procedures more efficient by increasing the accuracy of diagnosis to expert-level.* The development of the user-friendly interface has been pursued to enable comfortable procedures. The design is aimed not to interfere with clinical images and minimises required eye movement. Its display is designed to be simple and intuitive for excellent support during long hours in the examination room. NEW

LOWER GI ENDOSCOPY · 2020. 9. 16. · Tel.: +49 211-50 89 0, Fax: +49 211-50 89 8700 fi lm.eu, endoscopy_eu@fujifi lm.com FUJIFILM Europe GmbH Specifi cations are subject to change

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

  • G A S T R O E N T E R O L O G Y

    LOWER GI ENDOSCOPY

    meets ARTIFICIAL INTELLIGENCE

    for colonic polyp detection & characterisation

    DETECTION BOXDisplays the area where the suspicious polyp is detected.

    1

    DETECTION SOUNDSound signal when a suspicious polyp is detected. Volume can be defi ned for each user.

    VISUAL ASSIST CIRCLELights up in the direction where the suspicious polyp is detected.

    21

    2

    VISUAL ASSIST CIRCLEGREEN: Characterisation HYPERPLASTICYELLOW: Characterisation NEOPLASTIC

    2

    POSITION MAPIndicates the position of the suspicious area, this software is characterising.

    3

    CHARACTERISATION RESULTHYPERPLASTIC: hyperplastic polyps & SSLNEOPLASTIC: adenoma and cancer

    4

    STATUS BARIndicates the status of characterisation analysis regarding the suspicious area

    11

    12

    2

    3

    3

    4

    4

    DETECTION SUPPORT

    CHARACTERISATION SUPPORT

    *According to the validation study, the accuracy of non experts with the assistance of CAD EYE Characterisation was equivalent to that of an expert.

    CAD EYE Detection is aimed to improve the real time polyp detection rate to expert level, helping to recognise fl at lesions, multiple polyps simultaneously, as well as any lesions at the corner of the image. CAD EYE Detection is possible with White Light and LCI (Linked Color Imaging) mode.Once a suspected polyp is detected, CAD EYE Characterisation – in combination with BLI – can support endoscopists in the diagnosis of the polyp. This function analyses in real-time and without freezing or zooming if a polyp is hyperplastic or neoplastic, which is visually indicated by the use of different colour codes in the Position Map. CAD EYE Characterisation is aimed to make procedures more effi cient by increasing the accuracy of diagnosis to expert-level.*

    The development of the user-friendly interface has been pursued to enable comfortable procedures. The design is aimed not to interfere with clinical images and minimises required eye movement. Its display is designed to be simple and intuitive for excellent support during long hours in the examination room.

    NE

    W

  • G A S T R O E N T E R O L O G Y

    ON OFF

    Scope Switch 3* Scope Switch 2*

    CAD EYE Detection with White Light CAD EYE Detection with LCI CAD EYE Characterisation with BLI

    * The function of each switch can be defi ned individually.

    Heesenstr. 31, 40549 Düsseldorf, Germany Tel.: +49 211-50 89 0, Fax: +49 211-50 89 8700 www.fujifi lm.eu, endoscopy_eu@fujifi lm.com

    FUJIFILM Europe GmbH

    Sp

    ecifi

    catio

    ns a

    re s

    ubje

    ct t

    o ch

    ange

    with

    out

    notic

    e. T

    he n

    ame

    FUJI

    FILM

    and

    the

    FU

    JIFI

    LM lo

    go a

    re t

    rad

    emar

    ks o

    f FU

    JIFI

    LM

    Cor

    por

    atio

    n. A

    ll ot

    her

    trad

    emar

    ks s

    how

    n ar

    e tr

    adem

    arks

    of t

    heir

    resp

    ectiv

    e ow

    ners

    . All

    right

    s re

    serv

    ed. 0

    9/20

    20

    SEAMLESS OPERATIONCAD EYE Detection and Characterisation can be activated / deactivated simply by a push on the endoscope button or directly at the processor.

    The combination of special light wavelengths results in improved and accurate contrast imaging.

    Increased contrast in red colour leads to improved detection of infl ammation and accurate delineation.

    CAD EYE works with the expansion unit EX-1 and the CAD EYE software EW10-EC02 and can store up to 30 hours of video material in its internal memory. It can easily be controlled with the scope switch or directly at the processor.

    SPECIFICATIONS

    Scope Switch 3*

    MOVIE RECORDING FUNCTION

    Expansion Unit EX-1

    FOR COLONIC POLYP DETECTION &CHARACTERISATION

    Compatible processor for CAD EYE VP-7000 / EP-6000

    Compatible scopes for CAD EYE 700 series colonoscopes

    Video signals In: DVI-I x1 (1920 x 1080)Out: DVI-I x1, DVI-D x1 (1920 x 1080)

    Video recording function Compatible with 700/600/500 series colonscopes

    Video fi le specifi cations Resolution: Full-HD (1920 x 1080)Frame rate: 30 fpsFile format: mp4Max. recording time of a fi le: One hourMax. amount of time that can be stored on internal memory: 30 hours

    Other connections 2x RS-232C ConnectorsFront 1x USB 2.0, back 4 x USB 3.12x Network / LAN ports

    Power rating 100-240 VAC +/- 10%, 50/60 HZ, 1.25 to 0.60 A

    Dimensions (W x H x D) 370.0 mm x 99.0 mm x 465.6 mm

    Weight Approx. 7.1 kg

    Expansion Unit EX-1

    Software EW10-EC02

    Package content USB for CAD EYE (colonic polyp detection and characterisation)) installment, user manual

    POWERED BY

    For further information visit www.cadeye.eu.