Upload
trinhxuyen
View
219
Download
4
Embed Size (px)
Citation preview
NanoCeramic Racing Grease
Also Available
©2015 DAYTON LAMINA CORPORATION • 500 Progress Road • Dayton, OH 45449 a MISUMI Group Company
Also Available
©2015 DAYTON LAMINA CORPORATION • 500 Progress Road • Dayton, OH 45449 www.daytonlamina.com/racing a MISUMI Group Company
1 Day
16 oz. Tube
16 oz. Jar
Our EASY TO USE Syringe makes the process of packing your wheel bearings or birdcage bearings quick, easy, and CLEAN!
Starting with a clean, untreated bearing, inject DAYLube between the rollers using our convenient 1 oz. syringe, or a precision bearing packer fi lled with a 16 oz. tube. Proceed around the bearing, fi lling the cavities between the rollers.
Part # DescriptionNCRG1 1 oz. syringe
NCRG12 Case of 12 syringes
NCRG16 16 oz. tube
NCRG192 Case of 12 tubes
NCRG16J 16 oz. jar
NCRG192J Case of 12 jars
Easy Application Syringe makes the process of packing your wheel bearings
Starting with a clean bearing, inject DAYLube between the rollers using our convenient 1 oz. syringe, or a precision bearing packer fi lled with a 16 oz. tube. Proceed around the bearing, fi lling the cavities between the rollers.
Great For:� Bearings� Bushings � Axle Splines� Drive Plates� Rod Ends � Universal Joints
...and more!
LOW DRAG – HIGH TEMP – LONG LASTING
If you are using DayLube on a low drag, treated bearing, proceed around the bearing, fi lling the cavities between every other roller.
©2015 DAYTON LAMINA CORPORATION • 500 Progress Road • Dayton, OH 45449
ASTME 4-Ball Weld TestIn laboratory tests, DAYLube™ performed ex-tremely well over both standard greases and other so-called “high performance” lubricants. The follow-ing criteria were used:• 3 ball bearings submerged in grease • 500kg pressure applied to center bearing • center ball bearing spun at 10,000 rpm • 10 seconds with “no weld” passing grade
In standard grease tests, results showed an instant weld and catastrophic failure of all 4 bearings. In tests with competitive brands, a soft weld occurred after 2 seconds, and there was a complete failure and major damage to all bearings. Tests with DAYLube™ showed no weld after 10 seconds and minimal damage to all ball bearings.
DAYLube™ is a high performance, highly stable lubricant that delivers unmatched performance, durability and wear resistance. NanoCeramic particles – the key component – act as submicroscopic ball bearings that have an affi nity for steel, providing continuous lubrication at the surface. These are fabricated over a calcium sulfonate thickener and off er a lower Coeffi cient of Friction at all temperatures.
ASTME 4-Ball Weld TestIn laboratory tests, DAYLube™ performed ex-
DAYLube™ is a high performance, highly stable lubricant that delivers unmatched performance, durability and wear resistance. NanoCeramic particles – the key component – act as submicroscopic ball bearings that have an affi nity for steel, providing continuous lubrication at the surface. These are fabricated over a calcium sulfonate thickener and off er a lower Coeffi cient of Friction at all temperatures.
Competitive Grease
DAYLube™
NanoCeramic Racing Grease
Product Speci� cationsColor White/Off White
Texture Smooth
NLGI Grade 2
Penetration, Unworked ASTM D 217 286
Penetration, Worked 60 Strokes, ASTM D 217 286
Penetration Change, 100000 Strokes, FTM 791C 313.2 +/- 5%
Wheel Bearing, ASTM D 1263, Modifi ed 325°F (163° C) 0.4 Grams
Dropping Point, ASTM D 2265 +750°F
Oxidation Stability, ASTM D 942, 100 hours at 99° C 1 psi (7 kPa)
Four-Ball Wear, ASTM D2266-B, 40 kg, 1200 RPM, 75°C, Scar mm 0.67 Max
Four-Ball EP, Weld Point, ASTM D 2596, kgf 620
Timken OK Load, ASTM D 2509, Pounds 65
Copper Strip Corrosion, ASTM D 4048 1a
Corrosion Preventive Properties, ASTM D 1743 Pass
Oil Separation, ASTM D 1742 0.2%
Water Washout, ASTM D 1264, 175°F (79° C), % Loss 2.75
Low Temperature Torque, ASTM D 1478, - 40° F (- 40° C), gram-cm <5000
Salt Fog Test, B-117, hours +2,500
Base Fluid Properties: Base Fluid Properties:
Viscosity @ 100° C, ASTM D 445, Centistokes 10.8
Viscosity @ 40° C, ASTM D 445, Centistokes 100
Viscosity @ 210° F, ASTM D 2161, SUS 63
Viscosity @ 100° F, ASTM D 2161, SUS 523
Viscosity Index, ASTM D 2270 90
Pour Point, ASTM D 97 -12° C Max.
Flash Point, ASTM D 92 220° C
Available From:
Superior Bearing & Supply
800-423-5318
Wes "Junior" [email protected]
Andrea [email protected]