Click here to load reader
Upload
trinhdieu
View
212
Download
0
Embed Size (px)
Citation preview
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 1 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Low Current LED in Ø 5 mm Tinted Diffused Package
PRODUCT GROUP AND PACKAGE DATA• Product group: LED
• Package: 5 mm
• Product series: low current
• Angle of half intensity: ± 25°
FEATURES• Low power consumption
• High brightness
• CMOS/MOS compatible
• Specified at IF = 2 mA
• Luminous intensity categorized
• Yellow and green color categorized
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS• Low power DC circuits
19223
PARTS TABLE
PART COLORLUMINOUS INTENSITY
(mcd) at IF (mA)
WAVELENGTH(nm) at IF
(mA)
FORWARD VOLTAGE(V) at IF
(mA) TECHNOLOGYMIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
TLLR5400 Red 0.63 1.2 - 2 612 - 625 2 - 1.9 2.4 2 GaAsP on GaP
TLLR5401 Red 1 2 - 2 612 - 625 2 - 1.9 2.4 2 GaAsP on GaP
TLLY5400 Yellow 0.63 1.2 - 2 581 - 594 2 - 2.4 2.9 2 GaAsP on GaP
TLLY5401 Yellow 1 2 - 2 581 - 594 2 - 2.4 2.9 2 GaAsP on GaP
TLLG5400 Green 0.63 1.2 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP
TLLG5400-AS12 Green 0.63 1.2 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP
TLLG5401 Green 1 2 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLLR540., TLLY540., TLLG540.PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR 6 V
DC forward current Tamb ≤ 90 °C IF 7 mA
Surge forward current tp ≤ 10 μs IFSM 0.15 A
Power dissipation Tamb ≤ 90 °C PV 20 mW
Junction temperature Tj 100 °C
Operating temperature range Tamb -40 to +100 °C
Storage temperature range Tstg -55 to +100 °C
Soldering temperature t ≤ 5 s, 2 mm from body Tsd 260 °C
Thermal resistance junction/ambient RthJA 500 K/W
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 2 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note(1) In one packing unit IVmin./IVmax. ≤ 0.5
Note(1) In one packing unit IVmin./IVmax. ≤ 0.5
Note(1) In one packing unit IVmin./IVmax. ≤ 0.5
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLLR540., REDPARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 2 mATLLR5400 IV 0.63 1.2 - mcd
TLLR5401 IV 1 2 - mcd
Dominant wavelength IF = 2 mA λd 612 - 625 nm
Peak wavelength IF = 2 mA λp - 635 - nm
Angle of half intensity IF = 2 mA ϕ - ± 25 - deg
Forward voltage IF = 2 mA VF - 1.9 2.4 V
Reverse voltage IR = 10 μA VR 6 20 - V
Junction capacitance VR = 0 V, f = 1 MHz Cj - 50 - pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLLY540., YELLOWPARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 2 mATLLY5400 IV 0.63 1.2 - mcd
TLLY5401 IV 1 2 - mcd
Dominant wavelength IF = 2 mA λd 581 - 594 nm
Peak wavelength IF = 2 mA λp - 585 - nm
Angle of half intensity IF = 2 mA ϕ - ± 25 - deg
Forward voltage IF = 2 mA VF - 2.4 2.9 V
Reverse voltage IR = 10 μA VR 6 20 - V
Junction capacitance VR = 0 V, f = 1 MHz Cj - 50 - pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLLG540., GREENPARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 2 mATLLG5400 IV 0.63 1.2 - mcd
TLLG5401 IV 1 2 - mcd
Dominant wavelength IF = 2 mA λd 562 - 575 nm
Peak wavelength IF = 2 mA λp - 565 - nm
Angle of half intensity IF = 2 mA ϕ - ± 25 - deg
Forward voltage IF = 2 mA VF - 1.9 2.4 V
Reverse voltage IR = 10 μA VR 6 20 - V
Junction capacitance VR = 0 V, f = 1 MHz Cj - 50 - pF
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 3 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Current vs. Ambient Temperature
Fig. 2 - Relative Luminous Intensity vs. Angular Displacement
Fig. 3 - Forward Current vs. Forward Voltage
Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 5 - Relative Luminous Intensity vs. Forward Current/Duty Cycle
Fig. 6 - Relative Luminous Intensity vs. Forward Current
0
2
4
6
8
10
I F -
For
war
d C
urre
nt (
mA
)
T - Ambient Temperature (°C)
0 20 40 60 80 100
95 10064
0.4 0.2 0 0.2 0.4 0.6
95 10060
0.6
0.9
0.8
030°
10° 20°
40°
50°
60°
70°
80°0.7
1.0
I V r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
0.1
1
10
100
VF - Forward Voltage (V)95 10050
I F -
Forw
ard
Cur
rent
(mA
)
red
tp/T = 0.001tp = 10 µs
54320 1
0
95 10051
20 40 60 80 100
I V re
l - R
elat
ive
Lum
inou
s In
tens
ity
IF = 2 mA
0
0.4
0.8
1.2
1.6
2.0
Tamb - Ambient Temperature (°C)
red
10 20 50 100 2000
0.4
0.8
1.2
1.6
2.4
96 11490
500
0.5 0.2 0.1 0.05 0.021
IF (mA)
tp/T
I V r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
2.0red
0.01
0.1
1
10
100
95 10061 IF - Forward Current (mA)
I V re
l - R
elat
ive
Lum
inou
s In
tens
ity
1001010.1
red
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 4 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Relative Intensity vs. Wavelength
Fig. 8 - Forward Current vs. Forward Voltage
Fig. 9 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 10 - Relative Luminous Intensity vs.Forward Current/Duty Cycle
Fig. 11 - Relative Luminous Intensity vs. Forward Current
Fig. 12 - Relative Intensity vs. Wavelength
590 610 630 650 6700
0.2
0.4
0.6
0.8
1.2
690
95 10040 λ - Wavelength (nm)
1.0red
I V re
l - R
elat
ive
Lum
inou
s In
tens
ity
0 10.1
1
10
100
VF - Forward Voltage (V)
5
95 10053
I F -
For
war
d C
urre
nt (
mA
) yellow
tP/T = 0.001tP = 10 µs
2 3 4
0
0.4
0.8
1.2
1.6
2.0
I V r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
yellow
Tamb - Ambient Temperature (°C)95 10054
0 20 40 60 80 100
yellow
10 20 50 100 2000
0.4
0.8
1.2
1.6
2.4
96 11590
5000.5 0.2 0.1 0.05 0.021
IF (mA)tp/T
I V r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
2.0
yellow
0.01
0.1
1
10
100
95 10062 IF - Forward Current (mA)
I V r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
1001010.1
550 570 590 610 6300
0.2
0.4
0.6
0.8
1.2
650
95 10039 λ - Wavelength (nm)
1.0yellow
I rel -
Rel
ativ
e In
tens
ity
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 5 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 13 - Forward Current vs. Forward Voltage
Fig. 14 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 15 - Relative Luminous Intensity vs.Forward Current/Duty Cycle
Fig. 16 - Relative Luminous Intensity vs. Forward Current
Fig. 17 - Relative Intensity vs. Wavelength
0 20.1
1
10
100
4
I F -
For
war
d C
urre
nt (
mA
) green
tp/T = 0.001tp= 10 µs
1 3 5
00
0.4
0.8
1.2
1.6
95 10057
20 40 60 80 100
I v r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
Tamb - Ambient Temperature (°C)
green
IF = 2 mA
10 20 50 100 2000
0.4
0.8
1.2
1.6
2.4
96 11591
500
0.5 0.2 0.1 0.05 0.021
IF (mA)
tp/T
I V r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
2.0green
0.1 1 100.01
0.1
1
10
100
100
95 10059
I v r
el -
Rel
ativ
e Lu
min
ous
Inte
nsity
IF - Forward Current (mA)
green
520 540 560 580 6000
0.2
0.4
0.6
0.8
1.2
620
95 10038 λ - Wavelength (nm)
1.0
green
I rel -
Rel
ativ
e In
tens
ity
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 6 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
REEL
Fig. 18 - Reel Dimensions
AS12 = cathode leaves tape first
TAPE
Fig. 19 - LED in Tape
(4.7
)
12.5
± 0
.3
A C
35.5
± 0
.55
< 0
.7
1.1 ± 0.25
0.5+ 0.15- 0.05
Ø 5 ± 0.15
2.54 nom.
0.5 + 0.15- 0.05
Ø 5
.8 ±
0.1
5
8.7
± 0
.3
7.7
± 0
.15
1 m
in.
Area not plane
technical drawingsaccording to DINspecifications
R 2.49 (sphere)
6.544-5258.02-4Issue: 7; 23.07.1095 10916
Identification label:
355
90
30
4845
52 max.
948641Vishay/type/group/tape code/production code/quantity
Paper
Adhesive tape
Identification labelReel
Tape
Diodes: anode before cathodePhototransistors: emitter before collectorCode 21
Diodes:cathode before anode
Phototransistors:collector before emitter
Code 12
94 8671
TLLR540., TLLY540., TLLG540.www.vishay.com Vishay Semiconductors
Rev. 1.8, 03-Mar-15 7 Document Number: 83030For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TAPE DIMENSIONS in millimeters
Option Dim. “H” ± 0.5 mm
AS 17.3
94 8172
Quantity per:1000
Reel(Mat.-no. 1764)
0.9 max.Ø 4 ± 0.2
6.35 ± 0.7
12.7 ± 0.2
5.08 ± 0.7
12.7 ± 1± 2± 1
0.3
± 0
.212
± 0
.3
9 ±
0.5
2.54 + 0.6- 0.1
Measure limit over 20 index-holes: ± 1
18
+ 1
- 0.
5
Legal Disclaimer Noticewww.vishay.com Vishay
Revision: 02-Oct-12 1 Document Number: 91000
DisclaimerALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVERELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any otherdisclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose orthe continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and allliability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particularpurpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typicalrequirements that are often placed on Vishay products in generic applications. Such statements are not binding statementsabout the suitability of products for a particular application. It is the customer’s responsibility to validate that a particularproduct with the properties described in the product specification is suitable for use in a particular application. Parametersprovided in datasheets and/or specifications may vary in different applications and performance may vary over time. Alloperating parameters, including typical parameters, must be validated for each customer application by the customer’stechnical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainingapplications or for any other application in which the failure of the Vishay product could result in personal injury or death.Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Pleasecontact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or byany conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category PolicyVishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill thedefinitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Councilof June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm thatall the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Freerequirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make referenceto the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21conform to JEDEC JS709A standards.