No more water seapage and leakage!Lotasil Water Repellent Plug
fixes water leaking areas, waterproof walls and as a longterm
surface protection.Lotasil Water Repellent Plug is a solvent based
ready to use brush-on solution using a unique water repellent
technology that can waterproof tiles and grouts in showers. It
impregnates the substrate and chemically bonds with it to form an
invisible water repellent barrier.
Suitable usage for grout lines in bathrooms, terracotta, slate
and clay roof tiles or artificial stones etc.* Lotasil Water
Repellent Plug Plus - suitable usage for wooden products.
After applying Lotasil Water Repellent Plug, rain water is
repelled and formed into water beads.
WATER REPELLENTPLUG
Warning: Lotasil Water Repellent Plug is a flammable and
combustible liquid. Wear protective clothing and safety glasses
during application. Do not apply in areas occupied by personnels as
the solvent odours may be irritating. Lotasil is not to be applied
near any flame or fire. Partially or empty containers may contain
explosive vapours. Do not cut or weld on or near empty container.
Keep out of reach of children.
WATER REPELLENTPLUG
Lotasil Water Repellent Plug is a clear and colourless high
performance solvent based liquid water repellent.
Lotasil Paints Sdn Bhd 1070165V 23, Jalan TS6/8, Taman Industri
Subang47600 Subang Jaya, Selangor Darul Ehsan, Malaysia. T 603-5621
1318 F 603-5621 1322 E [email protected]
www.lotapaints.com
COPYRIGHT 2014 LOTASIL PAINTS SDN BHD ALL RIGHTS RESERVED
092014/500
Authorised Dealer
STEP 2Brush Lotasil Water Repellent Plug over tiles and grout
lines in the bathroom floors. Allow to dry for 12 hours before
using.
STEP 3Lotasil Water Repellent Plug is also recommended for new
bathrooms to prevent leaking.
STEP 1Clean all tiles and grout lines on the bathroom floor and
allow to dry totally before apply Lotasil Water Repellent Plug.
How to fix leaking bathrooms:
It can be used on concrete, wood products, decorative stones,
decorative bricks, canvas, cloth and most types of porous buiding
materials. It is also used as a Primer Coat before applying Lotasil
Silicone Waterproofing Membrane.
Lotasil Water Repellent Plug is formulated to protect vertical
above grade concrete and masonry surfaces including concrete
blocks. It is recommended for above grade use.
Product use:
For best results, allow new concrete walls or floors to cure 14
days before applying Lotasil Water Repellent Plug. Lotasil Water
Repellent Plug must be applied to completely dry substrates for
maximum penetration. Surfaces to be treated must be structurally
sound, dry, clean and free from all contaminates that will prevent
material penetration.
Lotasil Water Repellent Plug can be applied using a roller.
Apply 1 coat to 2 coats if necessary especially on more porous
substrates.
Direction for use:
Warning: Lotasil Water Repellent Plug is a flammable and
combustible liquid. Wear protective clothing and safety glasses
during application. Do not apply in areas occupied by personnels as
the solvent odours may be irritating. Lotasil is not to be applied
near any flame or fire. Partially or empty containers may contain
explosive vapours. Do not cut or weld on or near empty container.
Keep out of reach of children.
