Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
3. Type eduroam in the Network Name field.
4. Select WPA2-Enterprise as Security type.
5. Select Next.
How to connect to Wi-Fi
LSBU uses the eduroam service to connect Wi-Fi devices. Once you are set up you will
automatically be connected whenever you are in range. Wireless Internet access is
available across campus including Halls of Residence.
Windows 7
1. Select Start button > Control Panel
a. If in normal view, choose View network status and tasks.
b. If in Classic view, choose Network and Sharing Center.
2. Select Connect to a
Network.
41
How to connect to Wi-Fi
P a g e | 2
6. Select
Change connection settings
6 .Click on the Security tab. By default this should read: Security Type: WPA2 Enterprise Encryption Type: AES Network Authentication: PEAP 7. Select Settings.
8. In the Protected EAP properties
dialog box, uncheck Validate server certificate.
9. Under Select Authentication Method, choose Secured password (EAP-MSCHAP v2)
10. Select Configure…
11. In the EAP MSCHAPv2 Properties dialog box, uncheck the Automatically use my Window logon… dialog box.
12. Click OK until you reach the Manually connect to a wireless network dialog box.
13. Select Close.
14. Right-click the Wi-Fi icon in the system tray.
15. Select eduroam and Connect.
16. Type your username into the Enter Credentials box. For your username enter your full LSBU email address i.e. [email protected] (on some devices you may need to use your LSBU username).
17. Enter your password. 18. Select OK.
You are now connected!
How to connect to Wi-Fi
Page |3
Windows 8 and 10
1. Right click on the wireless icon in the bottom right of the
desktop and select Open Network and Sharing Centre.
2. Select Set up a new connection or network.
3. Select Manually
connect to a wireless
network and click Next
4. Enter the following
details:
a. Network name:
eduroam
b. Security type:
WPA2-
Enterprise
c. Encryption type:
AES
5. Click Next
How to connect to Wi-Fi
P a g e | 4
9. Tick the box labelled
Connect to these servers and type
forge.lsbu.ac.uk;radius.lsbu.ac.uk in
the box below.
10. In the Trusted Root Certification
Authorities: box below tick the
box labelled AddTrust External
CA Root.
11. Click OK.
6. Click Change Connection
Settings.
7. Select the Security tab
8. Click Settings.
How to connect to Wi-Fi
Page |5
12. Click Advanced Settings.
13. Tick the box labelled Specify
authentication mode and select User
authentication from the drop down
menu.
14. Click OK, OK and Close
15. Select the wireless network eduroam and type in
your full LSBU email address and password,
(on some devices you may need to use your
LSBU username).
16. Click on Connect.
You are now connected!
How to connect to Wi-Fi
P a g e | 6
Apple Mac
You are now connected!
1. Select the AirPort Wi-Fi icon.
2. Select Join Other Network…
3. Set the Network Name to eduroam.
4. Set Security to WPA2 Enterprise.
5. For your username enter your LSBU username (on some devices you may need to use your full email address).
6. Enter your LSBU password.
7. Select Join.
8. At the Verify Certificate dialog box select Continue.
9. You will need to enter your personal device password.
How to connect to Wi-Fi
Page |7
iPhone and iPad
1. Tap Settings.
2. Tap Wi-Fi.
3. Tap Other…
4. Type in eduroam.
You are now connected!
5. Tap Security.
6. Select WPA2 Enterprise.
7. Tap Other Networks.
8. Enter username & password.
9. For your username enter your full LSBU email address i.e. [email protected] (on some devices you may just need to use your LSBU username).
10. Tap Join.
11. Tap Accept or Trust to
accept the security
certificate.
How to connect to Wi-Fi
P a g e | 8
Android
1. Tap on the Apps icon.
2. Tap on Settings
3. Tap on Wi-Fi
For further information and support contact: Tel: 020 7815 6678 Email: [email protected] Visit: 1 South, Learning Resources Centre.
Produced by LLR 21/07/2017
4. Tap on eduroam.
5. Set EAP method to PEAP.
6. Set Phase 2 authentication to
MSCHAPV2.
7. For Identity enter your full LSBU email address i.e. [email protected] (on some devices you may just need to use your LSBU username). 8. Type password. 9. Tap Save or Connect.
You are now connected!