London CD70

Radio / CD

London CD70

Operating instructions

2

Bitte aufklappen

Open here

Ouvrir s.v.p.

Aprite la pagina

Hier openslaan a.u.b.

Öppna

Por favor, abrir

Favor abrir

3

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

7914

2 3 6

101213 8

1 4

11

5

40

CONTROLS1 button - opens the operating panel2 Button - switches the radio and mute

function on/off3 Volume control4 Soft keys - the function of the soft

keys depends on the current contentof the display

5 OK button - confirms menu entriesand leaves the menu

6 TIM button - selects the TIM function7 Multifunction rocker switch8 MENU button - selects the menu for

basic settings9 AUD button - adjusts bass and treble,

balance and fader as well as loudness: DIS button - changes display contents; Display< CD button - starts CD playback= CDC button - starts CD changer play-

back (only if connected) orplays an external audio source (only ifconnected)

> TUNE button - activates radio modeSelects the radio function menu (onlypossible in radio mode)

41

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

TABLE OF CONTENTS

Notes ............................................. 42Road safety ........................................... 42Installation ............................................. 42Accessories ........................................... 42Guarantee ............................................. 42International telephone information ....... 42

Theft protection, KeyCard ........... 43

Switching on/off ........................... 45

Using your car radio for the firsttime ................................................ 46

Volume adjustment ...................... 47Audio settings .............................. 48

Setting the display ....................... 49

Radio mode................................... 50Switching on radio mode ....................... 50RDS function (AF, REG) ........................ 50Selecting the frequency range/memory 51Tuning into a station .............................. 51Selecting short/long-range reception .... 52Setting the sensitivity of the stationsearch mode ......................................... 52Storing stations ..................................... 53Storing stations automatically(Travelstore) .......................................... 53Listening to preset stations ................... 53Scanning stations .................................. 53Setting the scanning time ...................... 54Programme type (PTY) ......................... 54Optimising radio reception .................... 55Switching between stereo and mono .... 56Changing the display ............................. 56Selecting radio text display.................... 56Naming a station ................................... 57

TIM - Traffic Information Memory 58Switching TIM on/off .............................. 58Recording traffic announcements ......... 58Altering TIM record standby time .......... 58Playback of recorded traffic announce-ments .................................................... 59Interrupting TIM record standby (forthe time spent at the car wash) ............. 59

Traffic information ........................ 60CD Mode........................................ 61Switching to CD mode, inserting a CD .. 61Removing a CD ..................................... 61Selecting a track .................................... 61Fast search (audible) ............................. 61Random play (MIX) ............................... 61Scanning tracks (SCAN) ....................... 61Repeating a track (REPEAT) ................. 62Changing the display ............................. 62Traffic announcements in CD mode ...... 62Programming favourite CD tracks ......... 62Naming CDs .......................................... 63

CD changer mode (optional) ....... 64Switching to CD changer mode............. 64Selecting a CD ...................................... 64Selecting a track .................................... 64Fast search (audible) ............................. 64Changing the display ............................. 64Repeating individual tracks or wholeCDs (REPEAT) ...................................... 64Random play (MIX) ............................... 65Scanning all tracks on all CDs (SCAN) . 65Naming CDs .......................................... 65Programming favourite CD tracks ......... 66

Clock - Time .................................. 67

Equalizer ....................................... 69Notes on adjusting the equalizer ........... 69Switching the equalizer on/off ............... 69Setting the equalizer ............................. 69Setting the quality factor of the filter ...... 69Select sound preset .............................. 70Setting aid for the equalizer .................. 70

TMC for dynamic navigationsystems ......................................... 71

Pre-amplifiers ............................... 71

Subout/subwoofer ........................ 72

High-pass filter ............................. 72External audio sources ................ 73

Technical data .............................. 73

Installation instructions............. 285

42

Thank you for deciding in favour of a Blau-punkt product. We wish you a great deal ofpleasure with your new car radio.

NoteBefore using your car radio, please read theseinstructions carefully and familiarise yourselfwith the unit. Keep these instructions in yourvehicle for later reference.

Road safety Road safety has priority. Only operate

your car radio if road and traffic conditionsallow. Familiarise yourself with the unit be-fore setting off on your journey.

You should always be able to hear police,fire and ambulance sirens in good time.For this reason, set the volume of your carradio at a suitable level.

InstallationIf you would like to install your car radio your-self, please read the installation and connec-tion instructions at the end of the manual.

AccessoriesPlease use only Blaupunkt-approved acces-sories.

Remote controlsThe most important functions can be select-ed safely from the steering wheel using theoptional remote controls RC 08 or RC 10.

AmplifiersAll Blaupunkt amplifiers are suitable for usewith the radio.

CD changerThe following Blaupunkt CD changers can beconnected to the radio: CDC A 06, CDC A08, CDC A 072 and IDC A 09.The CD changers CDC A 5 and CDC A 071can also be connected if you use an adaptercable (Blaupunkt no.: 7 607 889 093).

GuaranteeThe scope of the guarantee complies with thelegal provisions applicable in the country inwhich the unit was bought.Such legal provisions notwithstanding, Blau-punkt grants a 12-month guarantee.If you have any queries regarding the termsof the guarantee, please consult your author-ised Blaupunkt dealer. The purchase receiptapplies in all cases as your guarantee slip.

International telephoneinformationShould you have any questions about how touse the car radio or require any further infor-mation, please call us!The telephone information service numbersare printed on the last page of this manual.

NOTES

43

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Note:If a wrong card, e.g. a cash card, is introducedinto the car radio, “Wrong KC” will appear onthe display.Remove the wrong card and slide in a Key-Card your unit will recognise.

Removing a KeyCardIn order to unlock the operating panel,

press the button 1.

The operating panel then opens.

Place the card on the carriage and slideas far to the right as it will go.

Pull the card out of the operating panel.

Close the operating panel.

Note:In order to prevent theft, remove the KeyCardwhen you leave the vehicle and leave the op-erating panel open.

For safety reasons, the operating panelshould always be locked when the vehicleis in motion.

Making a second KeyCard “learn”the code Replacing a KeyCardYou can use the first KeyCard to make a sec-ond KeyCard “learn” to be an additional Key-Card when the car radio is in operation.

If you want a second KeyCard to “learn” thecode,

insert the first KeyCard and switch theradio on;

press the MENU button 8.

press the soft key 4 with the displayallocation “KC”;

press the soft key 4 with the displayallocation “LRN”.

“LEARN KC” appears on the display.

Theft protection, KeyCardA KeyCard is supplied along with the radio.

The car radio can also be used with a sec-ond KeyCard.

If a KeyCard is lost or damaged, you can ob-tain a replacement KeyCard through a Blau-punkt dealer.

If you use two KeyCards, the settings of thefirst KeyCard also apply to the second Key-Card. You do, however, have the option of stor-ing the following functions individually:station-button allocation, traffic-informationvolume, beep volume, equaliser setting.

In addition, the last set values for wavelength,station settings, scanning time and switch-on volume remain stored.

This means that you always have your se-lected basic setting after inserting the Key-Card.

Inserting the KeyCard Press the button 1.

The operating panel opens.

Insert the KeyCard with the contact sur-faces facing down as illustrated in thepicture (arrow 1).

2

13

Carefully place the KeyCard on the car-riage and slide it in as far as it will go inthe direction of the arrow (2).

Close the operating panel (arrow 3).

THEFT PROTECTION

44

Remove the first KeyCard.

“INSERT” appears on the display.

Insert the new KeyCard.

“LEARN OK” appears on the display.

To leave the KeyCard menu,

press the MENU button 8 once or OK5 repeatedly until the desired menuappears. The settings are now stored.

You can now use your car radio with the newKeyCard.

Note:A maximum of two KeyCards can be used foreach unit.

If you already have two Keycards for your unitand you make a third KeyCard “learn”, youwill no longer be able to use the unit with theKeyCard not used during the “learning” pro-cess.

Lost or damaged KeyCardIf all KeyCards belonging to the car radio aredamaged or lost, a new KeyCard must firstbe made to “learn” the unit’s master code,which can be found in your car radio pass.

Always keep your car radio pass in asafe place, but never in your car.

To find out how to prepare a new Keycard foruse, please read the section “Making a newKeyCard “learn” the code/entering the mas-ter code”.

If necessary, you can use this KeyCard tomake a second KeyCard learn the code. Tofind out how to do this, please read the sec-tion “Making a second KeyCard “learn”/replac-ing the KeyCard”.

You can obtain new KeyCards from your spe-cialist dealer.

Making a new KeyCard “learn” thecode/entering the master codeIf you no longer have a valid KeyCard for yourunit and would like to make a new KeyCardlearn the code:

insert the new KeyCard, which the unitdoes not recognise;

close the operating panel;

if necessary, switch off the radio;

Hold down the TUNE button > and thesecond soft key from the top on the left4 at the same time;

switch the unit on using button 2.

“0000” then appears on the display.

Enter the four-digit master code from your carradio pass as follows:

enter the number of the master codeusing the and buttons. To do this,press the buttons repeatedly until thedesired number appears on the display;

alter the input position using the buttons 7;

When the master code is correctly dis-played, press the OK button 5.

The new KeyCard is accepted when the unitswitches to playback..

Optical theft protection display(LED)The ON button and the drive-compartmentlights may flash when the unit is switched offand the KeyCard removed. For this, the “LED”menu setting must be at “on”.

Press the MENU button 8.

Press the soft key 4 with the displayallocation “KC”.

Press the soft key 4 with the displayallocation “LED”.

The current status “LED ON” or “LED OFF”appears on the display.

THEFT PROTECTION

45

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Press the soft key 4 with the displayallocation “LED” to switch between “LEDON” and “LED OFF”.


press the OK button 5 to return to theprevious menu level or the MENU but-ton 8 to leave the menu altogether.The settings are now stored.

Displaying radio pass dataWith the KeyCard supplied with your car ra-dio, you can have the data on your radio pass,such as name, type number (7 6 ...) and seri-al number displayed.


Press the soft key 4 with the displayallocation “KC”.

Press the soft key 4 with the displayallocation “READ”.

The radio pass data now appear on the dis-play as main text.


press the MENU button 8 or OK 5.

Taking care of the KeyCardYour KeyCard will function perfectly if the con-tacts are kept free of all foreign particles. Avoiddirect skin contact.

Please clean the KeyCard contacts whennecessary with some white spirit on a lint-free cloth.

Switching on/offThere are various ways of switching the carradio on and off.

Switching on/off using the button2 To switch the unit on, press the button

2.

The car radio is now switched on.

To switch the unit off, hold the button 2down for more than two seconds.

The car radio is now switched off.

Switching on/off using theignitionIf the car radio is correctly connected to theignition and has not been switched off usingthe button 2, it is switched on/off simultane-ously with the ignition.

You can also switch on your car radio whenthe vehicle ignition is off.

To do so, press the button 2.

Note:To protect the vehicle battery, the unit switch-es off automatically after one hour.

Switching on/off using theKeyCardYou can switch the car radio on or off by in-serting and removing the KeyCard if the unitwas previously switched off using the button2. You can read about inserting/removingthe KeyCard in the chapter “Theft protection,KeyCard”.

SWITCHING ON/OFFTHEFT PROTECTION

46

Using your car radio for thefirst timeIf the car radio is being connected for the firsttime or the power supply to the unit has beeninterrupted, the install menu appears on thedisplay. Please make the following settings inthe install menu:

select an external audio source insteadof a CD changer;

set the time;

adjust the tuner accordingly for opera-tion in the United States or Europe;

revert to manufacturer’s setting;

switch the internal amplifier on/off.

You can go to the install menu at any time:

Hold down the MENU 8 button untilthe install menu appears on the display.

Entering settings

Selecting an external audio source

Press the soft key 4 with the displayallocation “AUX”.

If “AUX” appears on the display, the input hasalready been activated.

Press the or button 7 to switch“AUX” on or off.

When the settings have been entered,press the MENU button 8.

Note:When the AUX input is activated, it can beselected with the CDC = button.

Setting the clock

Press the soft key 4 with the displayallocation “CLK”.

Set the hours using the or button7.

Press the button 7.

Set the minutes using the or button7.

Press the OK button 5.

Setting the tuner

Press the soft key 4 with the displayallocation “TUNE”.

Select “EUROPE” or “US” with the or button 7.


Switching the internal amplifier on/off

Press the soft key 4 with the displayallocation “AMP”.

Select “AMP ON” or “AMP OFF” withthe or button 7.

press the OK button 5.

Note:When you set the internal amplifier at “AMPOFF”, the loudspeaker directly connected tothe unit remains silent. In this case, only anexternal amplifier produces sound.

Reverting to the manufacturer’s setting

Press the soft key 4 with the displayallocation “NORM”.

“NORMSET” appears on the display. If youreally wish to return to the manufacturer’ssettings,


When you have completed all the settings,


Leaving the install menuIn order to leave the install menu,

press the OK button 5. The settingsare now stored.

USING YOUR CAR RADIO FOR THE FIRST TIME

47

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Volume adjustmentThe system volume can be adjusted in stepsfrom 0 (off) to 50 (maximum).

To raise the system volume, turn thevolume control 3 to the right.

To lower the system volume, turn thevolume control 3 to the left.

Setting the switch-on volumeIt is possible to adjust the volume that will playwhen you switch the radio on.


Press the soft key 4 with the displayallocation “VAR”.

Press the soft key 4 with the displayallocation “VOL”.

Set the volume using volume control 3or the or buttons 7.

If you wish to set the volume active beforethe unit was last switched off as the switch-on volume,

press the button 7.

“LAST VOL” appears on the display.

Risk of serious injury! If the switch-onvolume is set at the maximum, the volumecan be very high when you switch on yourcar radio.

If the volume was set on maximumbefore the unit was last switched off andthe switch-on volume is set at “LAST VOL”,the volume can be very high when youswitch on your car radio.

In both cases, your hearing may suffer se-rious damage!

Press the OK button 5 to go back tothe previous menu level or the MENUbutton 8 to leave the menu altogether.The settings are now stored.

Mute settingThis feature enables you to lower the systemvolume instantaneously (mute).

Briefly press the button 2.

“MUTE” appears on the display.

Deactivating the mute setting

Briefly press the button 2

or

turn the volume control 3.

Mute during telephoneIf your car radio is connected to a mobile tel-ephone, the volume will be muted as soon asyou “pick up” the telephone. In order for thisto work, the mobile telephone has to be con-nected to the car radio as described in theinstructions.If a traffic announcement is received during atelephone call and traffic information priorityhas been activated, the traffic announcementwill be relayed via the system’s loudspeak-ers. For further details, please read the chap-ter entitled “Traffic information“.

VOLUME

48

Setting the volume for thewarning tone (beep)If you hold down a button for longer than twoseconds when using certain functions, e.g.storing a station on a station button, a warn-ing tone (beep) sounds. The volume of thisbeep is adjustable.



Press the soft key 4 with the displayallocation “BEEP”.

Adjust the volume using the and buttons.

If you wish to deactivate the beep,

press the button 7.

“BEEP OFF” appears on the display.

Press the OK button 5 to return to theprevious menu level or the MENU but-ton 8 to leave the menu altogether.The settings are now stored.

Audio settings

Note:You can adjust the bass, treble and loudnesssettings separately for each audio source.

Bass settings Press the AUD button 9.

“AUDIO 1” appears on the display.

Press the soft key 4 with the displayallocation “BASS”.

Press the or button 7 to adjustthe bass.

When the settings have been completed,

press the AUD button 9.

Treble settings Press the AUD button 9.


Press the soft key 4 with the displayallocation “TREB”.

Press the or button 7 to adjustthe treble.



LoudnessLoudness means the bass levels are aurallycompensated, i.e. they are increased at low-er volume levels.

Press the AUD button 9.


Press the soft key 4 with the displayallocation “LOUD”.

Press the or button 7 to adjustthe loudness.

AUDIO SETTINGSVOLUME

49

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

If you want to deactivate the loudness func-tion,

press the button 7.

“LOUD OFF” appears on the display.



Setting the right/left balance To set the balance, press the AUD but-

ton 9.


Press the soft key 4 with the displayallocation “BAL”.

Press the or button 7 to adjust theright/left balance.



Fader settings, front/back To set the fader, press the AUD button

9.


Press the soft key 4 with the displayallocation “FADE”.

Press the or button 7 to adjust thefront/back fader.



Setting the displayYou can adjust the display to your needs andthe position of the car radio in your vehicle.

Setting the reading angle Press the MENU button 8.

Press the soft key 4 with the displayallocation “DISP”.

Press the soft key 4 with the displayallocation “ANGL”.

Set the reading angle using the or buttons 7.


Setting the display brightnessIf your car radio has been connected as de-scribed in the instructions, the display bright-ness will be activated when you turn on theheadlights. The display brightness can be setseparately in stages from 1 - 9 for day andnight.

Display brightness - day



Press the soft key 4 with the displayallocation “DAY”.

Set the brightness using the button7.


AUDIO SETTINGS DISPLAY

50

Display brightness - night



Press the soft key 4 with the displayallocation “NGHT”.

Set the brightness using the button7.


Radio modeThis unit is equipped with an RDS radio re-ceiver. Many of the receivable FM stationstransmit a signal that not only carries the pro-gramme but also additional information suchas the station name and programme type(PTY).The station name appears on the display assoon as it is received. The programme typecan be displayed if required. Read the sec-tion entitled “Programme Type (PTY)” for fur-ther details.

Switching on radio modeIf you are in CD, cassette, MiniDisc (depend-ing on your car radio) or CD changer mode:

Press the TUNE button >.

RDS function (AF, REG)The RDS functions AF (Alternative Frequen-cy) and REG (Regional) extend your radio’srange of functions.

AF: If this RDS function is activated, theunit automatically carries out a back-ground search for the best receivablefrequency for the station that is currentlyset.

REG: Some radio stations set asidesome of their broadcasting time for re-gional programmes that provide differ-ent regional content. With the REGfunction, your car radio is preventedfrom switching to alternative frequencieswith a different regional content.

Note:REG has to be specially activated/deactivat-ed in the unit’s menu.

RADIO MODEDISPLAY

51

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Switching the RDS function on/offTo use the RDS functions AF and REG,

press the TUNE button > when in radiomode.

The radio function menu appears on the dis-play.

Press the soft key 4 with the displayallocation “RDS”.

The RDS functions are active when “RDS”lights up on the display.

To return to the basic radio menu,

press the TUNE button > or wait 8 sec-onds. The settings are now stored.

Switching REG on/offTo use the RDS function REG,



Press the soft key 4 with the displayallocation “NEXT”.

The “second page” of the radio function menuappears on the display.

Press the soft key 4 with the displayallocation “REG”.

When the REG function is switched on or off,“REG ON” or “REG OFF” appears on the dis-play. When the REG function is activated, anarrow symbol lights up alongside “REG”.

Press the TUNE button > or wait8 seconds. The settings are now stored.

Selecting the frequency range/memoryThis unit can receive programmes broadcastover the FM as well as MW and LW (AM) fre-quency ranges. There are four preset memo-ry levels for the FM range and one each forthe MW and LW ranges.Six stations can be stored on each memorylevel.

Selecting the wavelengthTo select the wavelength, FM, MW or LW,



Press the soft key 4 with the displayallocation “FM” for the FM wavelength.

Press the soft key 4 with the displayallocation “AM” for the MW and LWwavelengths.



Selecting the FM memoryTo switch between the FM memory levels,FM1, FM2, FM3 or FMT,

press the soft key 4 with the displayallocation “NEXT” repeatedly when inFM radio mode until the desired memo-ry level appears on the display.

The memory levels are called up in the fol-lowing order: FM1, FM2, FM3, FMT.

Selecting MW or LWTo select an AM wavelength, MW or LW,

first of all select the AM wavelength;

press the soft key 4 with the displayallocation “NEXT” repeatedly until thedesired wavelength, MW or LW, ap-pears on the display.

Tuning into a stationThere are various methods available for tun-ing into a station.

Automatic station search mode

Press the or button 7.

The unit tunes into the next receivable sta-tion.

RADIO MODE

52

Tuning into stations manuallyYou can also tune into stations manually.

Press either the or button 7.

Note:You can only tune into stations manually ifthe RDS function is first deactivated.

Browsing through broadcasting networks(only FM)If a radio station provides several pro-grammes, you have the option of browsingthrough its so-called “broadcasting network”.

Press the or button 7 to move tothe next station on the broadcasting net-work.

Note:If you want to use this feature, the RDS func-tion must first be activated.

You will then only be able to switch to sta-tions that you have received once already. Todo so, use the Scan or Travelstore function.

Selecting short/long-rangereceptionYou can choose whether you wish to selectonly short-range or also long-range stations.

Press the TUNE button > when in ra-dio mode.




Press the soft key 4 with the displayallocation “LOC”.

The current status “LOCAL” (short-range re-ception) or “DISTANCE” (long-range recep-tion) appears briefly on the display. When “LO-CAL” is activated, an arrow symbol lights upalongside “LOC”.



Setting the sensitivity of thestation search modeYou can set the sensitivity of short and long-range reception for AM and FM separately.

Short-range reception sensitivity (S-LO)


Press the soft key 4 with the displayallocation “TUN”.

Press the soft key 4 with the displayallocation “S-LO”.

Use the buttons 7 to choose be-tween setting the sensitivity for the AMor FM wavelength.

Press the or buttons 7 to set thesensitivity.

The display shows the currently set value forsensitivity. “LO 3” denotes maximum sensi-tivity for short-range reception. “LO 1” is theminimum.


Long-range reception sensitivity (S-DX)



Press the soft key 4 with the displayallocation “S-DX”.

Use the buttons 7 to choose be-tween setting the sensitivity for wave-length AM or FM.

Press the or buttons 7 to set thesensitivity.

RADIO MODE

53

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

The display shows the currently set value forsensitivity. “DX 3” denotes maximum sensi-tivity for long-range reception. “DX 1” is theminimum.

Press the MENU button 8 once or OK5 repeatedly until the desired menuappears on the display. The settings arenow stored.

Storing stations

Storing stations manually

Select the required FM memory level,FM1, FM2, FM3, FMT or either wave-length MW or LW.

Tune into the desired station as de-scribed under “Tuning into a station”.

Hold down one of the six soft keys 4on which you wish to store the stationfor more than two seconds.

Storing stations automatically(Travelstore)You can automatically store the six stationswith the strongest reception in the region (onlyFM). The stations are stored in the FMT mem-ory.

Note:Stations that were previously stored in thismemory are deleted in the process.

To use the Travelstore function,



Press the soft key 4 with the displayallocation “TS”.

The automatic station storing procedure be-gins. “T-STORE” appears on the display. Af-ter the process is completed, the stationstored in FMT memory location 1 is played.

Listening to preset stations Select the memory or frequency range

in which the station was stored.

Press the soft key 4 with the displayallocation of the name of the desiredstation.

Scanning stations

Scanning receivable stations (Radio-SCAN)You can briefly listen in to all receivable sta-tions. The scanning time can be set in themenu at between 5 and 30 seconds.

Starting Radio-SCANTo start the Radio-SCAN function,


The radio menu function appears on the dis-play.

Press the soft key 4 with the displayallocation “SCAN”.

The scanning process begins. The next re-ceivable station is briefly played. The stationsare scanned in ascending order.

Scanning stored stations (Preset Scan)You can listen in to all currently receivablestations on all memory levels. The scanningtime can be set in the menu at between 5and 30 seconds.

Starting preset scanTo start preset scan,



Press the soft key 4 with the displayallocation “PS”.

The scanning process begins. The memorylevels are scanned consecutively beginningwith memory level FM1. An arrow symbol

RADIO MODE

54

lights up alongside the scanned memory po-sition.

Ending SCAN, continuing to listen to astation


The scanning process is completed, the sta-tion last scanned remains active.

Setting the scanning time Press the MENU button 8.



Press the or button 7 repeatedlyuntil the desired scanning time appearson the display.

Press the MENU button 8 once or OK5 repeatedly until the desired menuappears on the display. The settings arenow stored.

Note:The set scanning time also applies to scan-ning in the CD, cassette, MiniDisc (depend-ing on your car radio) and CD changer mode.

Programme type (PTY)Besides transmitting the station name, someFM stations also provide information on thetype of programme they are broadcasting.This information can be received and dis-played by your car radio.

For example, the programme types can be:

CULTURE TRAVEL JAZZ

SPORT NEWS POP

ROCK CLASSICS

You can use the PTY function to select sta-tions of a particular programme type.

When a PTY search has been started andno station has been found, the search is con-tinued in the background. As soon as a sta-

tion of the selected programme type is re-ceived, the unit automatically switches fromthe current station, CD or CD changer modeto the station with the selected programmetype.

Switching PTY on/offTo use the PTY function,


The radio function appears on the display.



Press the soft key 4 with the displayallocation “PTY”.

“PTY” appears on the display.

Press the TUNE button > or wait8 seconds. The settings are now stored.

Selecting programme type and starting asearch

Press the or button 7.

The current programme type appears on thedisplay.

If you would like to select a different pro-gramme type,

press the buttons 7 repeatedlyuntil the desired programme type is dis-played.

Orto select a preset programme type,

press the soft key 4 with the displayallocation of the desired programmetype;

press the or button 7 to start thesearch.

The next station corresponding to your se-lected programme type will be tuned into.

RADIO MODE

55

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Note:If no station corresponding to the selectedprogramme type is found, “NO PTY” appearsbriefly on the display. The unit then tunes inautomatically to the station last received.

Storing the programme type on thestation buttons

Use the or button 7 to select aprogramme type.

To store a programme type,

hold down for more than one secondone of the soft keys 4 with the displayallocation of a programme type.

The programme type is now stored in theselected position.

Selecting a PTY languageYou can set the language in which you wishthe programme type to appear.



Press the soft key 4 with the displayallocation “PTY”.

Press the or button 7 repeatedlyuntil the desired language, “DEUTSCH”,“ENGLISH” or “FRANCAIS”, appears onthe display.


Optimising radio reception

High-frequency cut-off feature (HICUT)The HiCut function improves the sound dur-ing poor radio reception. If interference oc-curs, the treble is automatically reduced andthus also the interference level.

Switching HiCut on/offTo switch HiCut on or off,

press the MENU button 8;

press the soft key 4 with the displayallocation “TUN”;

press the soft key 4 with the displayallocation “HCUT”;

press the or button 7.

When HiCut is deactivated, “NO HICUT” ap-pears on the display.


Setting the HiCut function



Press the soft key 4 with the displayallocation “HCUT”.

Press the or button 7 repeatedlyuntil the desired HICUT reduction ap-pears on the display.

“HICUT 3” denotes the largest automatic tre-ble and interference-level reduction.


RADIO MODE

56

Interference-related wavelength change(SHARX)With the SHARX function you can eliminateinterference from neighbouring stations al-most completely. Activate the SHARX func-tion in an area of high transmitter density.

Switching SHARX on/offTo switch SHARX on/off,


press the soft key 4 with the displayallocation “TUN”;

press the soft key 4 with the displayallocation “SHRX”.

The current status, “SHARX ON” or “NOSHARX”, appears briefly on the display. WhenSHARX is activated, an arrow symbol lightsup on the display alongside “SHRX”.


Switching between stereo andmonoWhen radio reception is poor, you can selectthe mono radio mode. The transition from ster-eo to mono is gradual and the car radio willrevert to the stereo mode when switched ononce again.

Press the TUNE button > when in ra-dio mode.




Press the soft key 4 with the displayallocation “MONO”.

The current status “MONO” or “STEREO”appears briefly on the display. When mono isactivated, an arrow symbol lights up along-side “MONO”.

Press the TUNE button > or wait 8 sec-onds. The settings are now stored.

Changing the displayYou can select the content of the display. Inthe top display line (lead line) you can switchbetween the station name, frequency, pro-gramme type and time. In the bottom displayline (DOT field) you can switch between thetime and the memory level.

Press the DIS button : repeatedly untilthe desired information - station name,frequency, programme type or time - ap-pears in the lead line.

Selecting radio text displaySome radio stations use the RDS signal tobroadcast “main texts”, so-called radio texts.You can allow or block the display of radiotext.

Press the TUNE button > when in radiomode.




Press the soft key 4 with the displayallocation “RTXT”.

Press the TUNE button > or wait 8 sec-onds. The settings are now stored.

RADIO MODE

57

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Naming a stationYou have the option of giving a preset stationa four-digit name to appear on the display.



Press the soft key 4 with the displayallocation “NAME”.

This brings you to the edit mode. If the se-lected station is still unnamed, four underlinesappear on the display.

The current input position flashes.

Select the station you would like toname by pressing the soft key 4 withthe display allocation “PREV” or “NEXT”for the previous or next preset station onthat memory level.

Use the / buttons 7 to select yourcharacters. If a position remains blank,you select the underline.

You can change the input position usingthe or button.

Press the OK button 5 to store thename.


Clearing station names




This brings you to the edit mode.

Select the station name you would liketo clear by pressing the soft key 4 withthe display allocation “PREV” or “NEXT”for the previous or next preset station onthat memory level.

Press the soft key 4 with the displayallocation “CLR”.

The station name is now cleared.

Resetting station names to RDS names




This brings you to the edit mode.

Select the station name you would liketo reset by pressing the soft key 4 withthe display allocation “PREV” or “NEXT”for the previous or next preset station onthat memory level.

Press the soft key 4 with the displayallocation “DEF”.

The station name is reset to the abbreviationof the RDS station name.

RADIO MODE

58

TIM - Traffic InformationMemoryThe unit has a digital voice memory in whichup to four traffic announcements with a dura-tion of max. four minutes in all are automati-cally recorded.

The oldest announcements are deleted de-pending on the space needed for the latestannouncement.

If an announcement is longer than four min-utes, “Overflow” appears on the display at theend of four minutes to indicate that the entireannouncement could not be recorded.

If a new traffic announcement is made duringplayback of the TIM, playback is interruptedand the new announcement recorded.

Traffic announcements more than four hoursold when the unit is switched on are automat-ically deleted.

Danger of damage to the remote an-tenna at the car wash.

An automatic remote antenna stays fullyextended when TIM is activated even whenthe car radio is switched off.

Damage can be caused if the remote an-tenna remains extended at a car wash.

Please read the section “Interrupt TIMrecord standby”.

Switching TIM on/offYou can switch the TIM function on and offwhen the car radio is on.

Press the TIM button 6 for approx. onesecond.

The current status appears briefly on the dis-play:

“TIM 2H” = TIM is switched on

“TIM OFF” = TIM is switched off.

When TIM is switched on, the traffic an-nouncements of a set traffic radio station arerecorded for two hours after the unit isswitched off.

Recording traffic announcementsWhen the unit is switched on, traffic an-nouncements are automatically recorded if atraffic information station is tuned in.

When the unit is switched off, traffic announce-ments are recorded for two hours if TIM isswitched on and a traffic information stationis tuned in.

If, when you switch on your radio, it is tunedto a station which does not itself broadcasttraffic information and the TIM function is ac-tivated, it will automatically search for a trafficinformation station.

Altering TIM record standby timeYou can alter the time your unit is on recordstandby when switched off from two to 24hours.

When TIM is activated, “TIM 2 H” will alwaysappear on the display when the car radio isswitched off.

In order to alter the TIM record standby timeto 24 hours,

press the TIM button 6 when the carradio is off.

“TIM 24H” will appear briefly on the display.This indicates that the TIM function has beenset at max 24 hours for one single occasion.

A remote antenna remains extended for aslong as the TIM function is activated.

Each time the car radio is switched off, therecord standby time is reduced to 2 hours, toprotect the vehicle battery.

The connected remote antenna re-mains extended while the TIM function isactivated.

TIM

59

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Playback of recorded trafficannouncementsFour traffic announcements can be record-ed.

If no announcement has been recorded, “NOTIM” will appear on the display.

In order to listen to the recorded traffic an-nouncements

press the TIM button 6.

Press the soft key marked for the de-sired traffic announcement (“TIM1” to“TIM4”).

“TIM1” is the latest announcement and willbe played back first. The other traffic an-nouncements then follow in ascending order.An arrow symbol flashes on the display along-side the traffic announcement currently be-ing played back. The name of the station whichtransmitted the traffic announcement appearson the display along with the time of record-ing.

After the last announcement has been played,the unit reverts to the previous mode.

In order to continue listening to the last activeaudio source without listening to all trafficannouncements,

press the TIM button 6.

Interrupting TIM record standby(for the time spent at the car wash)

Before you drive into the car wash,

switch the radio off.

If the display disappears immediately, TIMrecord standby is switched off and the remoteantenna is pulled in.

You can now enter the car wash.

If, after switching off the radio, “TIM 2H” ap-pears briefly on the display, TIM record stand-by is activated.

In order to deactivate TIM record standby,

press the TIM button 6 until “TIM OFF”appears briefly on the display.

TIM record standby is now deactivated andthe antenna is pulled in (make sure to checkthis) and remains pulled in until the car radiois switched on again.

You can now drive into the car wash.

As soon as you switch on the radio, the TIMfunction is immediately reactivated and theremote antenna extended once more.

Note:To prevent damage, do not switch the radioon again until you have driven out of the carwash.

TIM

60

TRAFFIC INFORMATION

Traffic informationYour car radio is equipped with an RDS-EONreception system.EON (Enhanced Other Network) stands forthe broadcasting of station information withina broadcasting network.When a traffic announcement (TA) is broad-cast, your unit will automatically switch, with-in a broadcasting network, from a stationwhich does not transmit traffic information toone that does.The unit reverts to the programme previouslyheard when the traffic announcement is over.

Switching traffic informationpriority on/off Press the soft key 4 with the display

allocation “TA”.

Priority for traffic announcements is activat-ed when “TA” lights up on the display.

Note:You will hear a warning tone,

if you leave the reception area of a traf-fic information station to which you arecurrently tuned in;

if you leave the reception area of a traf-fic information station when you are lis-tening to a CD, cassette or MiniDisc(depending on your car radio) and thesubsequent automatic search cannotfind a new traffic information station;

if you retune the radio from a traffic in-formation station to one that does notbroadcast traffic information.

Either deactivate the priority for traffic infor-mation or switch to a station which broadcaststraffic information.

Setting the traffic announcementvolume Press the MENU button 8.


Press the soft key 4 with the displayallocation “TVOL”.

To set the desired volume, press the or button 7 or turn the

volume control;


61

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

CD ModeYou can use this unit to play standard CDswith a diameter of 12 cm.

Generally, so-called CD-Rs (home-recordedCDs) can be played, but due to differences inCD quality, Blaupunkt cannot vouch for per-fect performance.

Rewritable CDs (CD-RWs) cannot be playedon this unit.

Risk of damage to CD drive!

Single CDs with a diameter of 8 cm andCDs which are not circular (“shape CDs”)should not be used.

We accept no liability for any damage tothe CD drive that may occur as a result ofthe use of unsuitable CDs.

Switching to CD mode, insertinga CD If there is no CD in the drive,

press the button 1.

The operating panel opens.

Gently insert the CD into the CD com-partment with the printed side upper-most until you feel some resistance.

The CD will be drawn into the drive automat-ically.Do not hinder or assist the drive as it drawsthe CD in.

Close the operating panel using lightpressure until you feel it latch into place.

The CD menu appears on the display, CDplayback begins.

If there is already a CD in the drive,

press the CD button <.

The CD menu appears on the display andplayback begins from the point at which it waslast interrupted.

Removing a CD Press the button 1.

The operating panel opens to the front.

Press the button on the open operat-ing panel.

The CD is ejected.

Carefully remover the CD.

Note:If you do not remove the CD within eight sec-onds, it will be drawn back into the CD drive.

Selecting a track Press one of the buttons on the arrow

block 7 repeatedly until the number ofthe desired track appears on the display.

If the or button 7 is pressed once, thecurrent track is played again from the begin-ning.

Fast search (audible)For a fast search backwards or forwards

keep the or / buttons 7pressed until the fast search backwardsor forwards begins.

Random play (MIX) Press the soft key 4 with the display

allocation “MIX”.

“MIX CD” appears briefly on the display. Thenext track played will be randomly selected.

Stopping MIX

Press the soft key 4 with the displayallocation “MIX” one again.

“MIX OFF” appears briefly on the display.

Scanning tracks (SCAN)You can briefly listen in to all the tracks on aCD.


CD MODE

62

“SCAN” appears briefly on the display. TheCD tracks are played in ascending order.

Note:The scanning time is adjustable. Read aboutsetting the scanning time in the section “Set-ting the scanning time” in the chapter “Radiomode”.

Stopping SCAN and continuing playback

Press the soft key 4 with the displayallocation “SCAN” once again.

The current track will then continue to play.

Repeating a track (REPEAT) Press the soft key 4 with the display

allocation “RPT”.

The track is then repeated until RPT is deac-tivated.

Stopping REPEAT

Press the soft key 4 with the displayallocation “RPT” once again.

Normal playback is resumed.

Changing the displayIn CD mode, you can switch between thevarious display modes:

display of track number and time;

display of track number and playingtime;

display of CD name and track number.

To switch between the different displaymodes,

press the DIS button : repeatedly untilthe desired information appears on thedisplay.

Note:A CD name can only be displayed if a namehas been allocated to the inserted CD. Pleasesee the section “Naming CDs”.

Traffic announcements in CDmodeIf you want to receive traffic announcementswhilst listening to a CD,

Press the soft key 4 with the displayallocation “TA”.

Traffic announcement priority is active when“TA” lights up on the display. Please see thechapter “Traffic information”.

Programming favourite CD tracksWith the TPM function (Track ProgrammeMemory), you can programme, store and playyour favourite tracks on a particular CD. Nomatter what order the tracks are programmed,they will always be played back in ascendingorder. When playback of favourite tracks isactivated, only the previously programmedtracks of the CD in the drive will be played.Up to 30 CDs with a maximum of 40 trackseach can be handled in CD mode.

Selecting favourite tracksProceed as follows to select your favouritetracks on a CD:

insert the CD from which you wish toselect your favourite tracks in the CDdrive;

choose your first favourite track;

press the soft key 4 with the displayallocation “TPM” for more than one sec-ond.

The track is now included in the list of favour-ite tracks for this CD.

Proceed in exactly the same way withall your other favourite tracks on the CD.

Switching off playback of favourite tracksTo call up the list of favourite tracks for theinserted CD or to switch off playback of fa-vourite tracks,

press the soft key 4 with the displayallocation “TPM”.

CD MODE

63

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

The current TPM status (“TPM ON” or “TPMOFF”) appears briefly on the display. Whenplayback of favourite tracks is active, an ar-row symbol lights up alongside “TPM” on thedisplay.

Clearing preset tracksIn order to clear individual tracks from the listof favourite tracks for a CD,

switch on TPM;

select the track you wish to clear;

hold down the soft key 4 with the dis-play allocation “CLR” for approx. twoseconds.

“TR CLR” appears briefly on the display andthe track is cleared from the list.

Clearing the list of favourite tracks for aCDYou can also clear the entire list of favouritetracks for a CD. The CD whose favourite tracksyou wish to clear must be inserted at the timeof clearance.

Switch on TPM.

Hold down the soft key 4 with the dis-play allocation “CLR” for approx. fiveseconds.

“CD CLR” appears briefly on the display andthe list is cleared.

Naming CDsTo make it easier for you to recognise yourCDs, the car radio offers an individual nameoption for 30 CDs. The names should have amaximum of eight digits.If you attempt to allocate more than 30 names,“FULL” will appear on the display.

Entering/altering CD names

Listen to the desired CD.


This brings you to the edit mode. If the CDyou have selected is not yet known to the unit,eight underlines will appear on the display.

The current input position flashes.

Use the or buttons 7 to chooseyour characters. Should a position re-main blank, you select the underline.

Use the or button 7 to change theinput position.


Clearing a CD name

Listen to the CD whose name you wishto clear.


Press the soft key 4 with the displayallocation “CD”.

Hold down the soft key 4 with the dis-play allocation “CD” until “CD CLR” ap-pears on the display.

The CD name has now been cleared.


Clearing all CD names

Listen to a CD.


Press the soft key 4 with the displayallocation “CD”.

Hold down the soft key 4 with the dis-play allocation “ALL” until “MEMO CLR”appears on the display.

All CD names have now been cleared.


CD MODE

64

CD changer mode(optional)To find out which CD changer is compatiblewith this unit, please see page 42 of this ma-nual or consult your Blaupunkt dealer.

Note:Information on handling CDs, inserting CDsand operating the CD changer can be foundin the operating instructions accompanyingyour CD changer.

Switching to CD changer mode Press the CDC button =.

The CD changer menu appears on the dis-play and playback is resumed at the pointwhere it was interrupted. If the magazine hasbeen removed from the CD changer and re-inserted, the CD magazine will first bescanned. Playback then begins with the firsttrack of the first CD the CD changer recog-nises.

Selecting a CDTo change up or down to a different CD,

press the soft key 4 with the displayallocation of the desired CD (CD1 -CD10). To do this, if necessary pressthe soft key 4 with the display alloca-tion “NEXT” to the “second page” of thebasic CD changer menu

or

press the or button 7 repeatedlyuntil the number of the desired CD ap-pears on the display.

Selecting a trackIn order to change up or down to another trackon the CD currently being played,

press the or button 7 repeatedlyuntil the number of the desired track ap-pears on the display.

If the button 7 is pressed once, the cur-rent track is played again from the beginning.

Fast search (audible)For a fast search backwards or forwards

keep the or button 7 pressed untilthe fast search backwards or forwardsbegins.

Changing the displayIn CD changer mode, you can switch betweenthe various display modes:

display of CD number and tracknumber;

display of CD number, track numberand playing time;

display of time and track number.

display of CD name and track number.

To switch between the different displaymodes,

press the DIS button : repeatedly untilthe desired information appears on thedisplay.

Note:A CD name can only be displayed if a namehas been allocated to the inserted CD. Pleasesee the section “Naming CDs”.

Repeating individual tracks orwhole CDs (REPEAT) In CD changer mode, press the CDC

button =.

The CD changer function menu appears onthe display.

Press the soft key 4 with the displayallocation “RPT”.

“RPT TRCK” appears briefly on the display.

To repeat play of the entire CD,

press the soft key 4 with the displayallocation “RPT” once again.

“RPT CD” appears briefly on the display.

CD CHANGER MODE

65

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Stopping REPEATTo stop the repeat function for the currenttrack or CD,

press the soft key 4 with the displayallocation “RPT” repeatedly until “RPTOFF” appears briefly on the display.

Random play (MIX)To play the tracks on the current CD in ran-dom order,

press the CDC button = while in CDchanger mode.

The CD changer function menu appears onthe display.

Press the soft key 4 with the displayallocation “MIX”.

“MIX OFF” appears on the display.

Select “MIX CD” using the button 7.

To play all tracks of all inserted CDs in ran-dom order,

select “MIX ALL” with the button 7.

Note:In the case of CD changers CDC A 08 andIDC A 09, all CDs and all tracks in the chang-er are randomly selected. All other changersfirst play all the tracks on a CD in randomselection before moving to the next CD in thechanger.

Stopping MIX

Select “MIX OFF” using the button7.

Scanning all tracks on all CDs(SCAN)To listen in briefly to all the tracks on all in-serted CDs in ascending order,

press the button CDC button = while inCD changer mode.

The CD changer menu appears on the dis-play.

Press the soft key 4 with the displayallocation “SCAN”

“SCAN” appears in the display alongside aflashing arrow symbol.

Stopping SCANTo stop scanning,

press the soft key 4 with the displayallocation “SCAN” once again.

The track last scanned then continues to beplayed.

Note:You can set the scanning time as required.Please see the section “Setting the scanningtime” in the “Radio mode” chapter.

Naming CDsTo make it easier for you to recognise yourCDs, the car radio offers an individual nameoption for 99 CDs. The names should have amaximum of seven digits.If you attempt to allocate more than 99 names,“FULL” will appear on the display.

Entering/altering CD names

Press the CDC button = when in CDchanger mode.

The CD changer function menu is displayed.


Select the CD you wish to name usingthe / buttons 7 or the soft keys4 “PREV” (previous) or “NEXT.

This brings you to the edit mode. If the CDyou have selected is not yet known to the unit,seven underlines appear on the display andthe current input position flashes.

Use the / buttons 7 to chooseyour characters. Should a position re-main blank, you select the underline.

User the or button 7 to changethe input position.

CD CHANGER MODE

66


Clearing a CD name

Press the MENU button 8 when in CDchanger mode.

Press the soft key 4 with the displayallocation “CDC”.

Select the CD whose name you wish tochoose using the / buttons 7 orthe soft keys “PREV” (previous) or“NEXT”.

Hold down the soft key 4 with the dis-play allocation “CD” until ”CD CLR” ap-pears on the display.

The CD name has now been cleared.


Clearing all CD names

Press the MENU button 8 while in CDchanger mode.

Press the soft key 4 with the displayallocation “CDC”.

Hold down the soft key 4 with the dis-play allocation “ALL” until “MEMO CLR”appears on the display.

All CD names have now been cleared.


Programming favourite CD tracksWith the TPM function (Track ProgrammeMemory), you can programme, store and playyour favourite tracks on a particular CD. Nomatter what order the tracks are programmed,they will always be played back in ascendingorder. When playback of favourite tracks isactivated, only the previously programmedtracks of the CD in the drive will be played.Up to 30 CDs with a maximum of 40 trackseach can be handled in CD mode.

Programming favourite tracksProceed as follows to select your favouritetracks on a CD:

in the CD changer mode, select the CDfrom which you wish to select your fa-vourite tracks;

choose your first favourite track;

press the soft key 4 with the displayallocation “TPM” for more than one sec-ond.

The track is now included in the list of favour-ite tracks for this CD.

Proceed in exactly the same way withall your other favourite tracks on the CD.

Switching playback of favourite trackson/offTo call up the preset favourite tracks for theinserted CD or to switch off playback of thefavourite tracks,

press the soft key 4 with the displayallocation “TPM”.

The current TPM status (“TPM ON” or “TPMOFF”) appears briefly on the display. Whenplayback of favourite tracks is active, an ar-row symbol lights up alongside “TPM” on thedisplay.

CD CHANGER MODE

67

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

Clearing preset of tracksIn order to clear individual tracks from the listof favourite tracks for a CD,

switch on TPM;

select the track you wish to clear;

hold down the soft key 4 with the dis-play allocation “CLR” until “TR CLR” ap-pears on the display.

The track is now cleared from the list.

Clearing the list of favourite tracks for aCDYou can also clear the entire list of favouritetracks for a CD. The CD for which you wish toclear your favourite tracks must be in play atthe time of clearance.

Switch on TPM.

Hold down the soft key 4 with the dis-play allocation “CLR” until “CD CLR” ap-pears briefly on the display.

The list is now cleared.

CLOCK - Time

Setting the timeThe time can be set automatically using theRDS signal. If no station using this function isavailable, the unit attempts to receive theDCF-77 signal (radio clock) the next time theunit is switched off. It is also possible for youto set the clock manually.

Setting the time automaticallyTo set the time automatically,


press the soft key 4 with the displayallocation “CLK”;

press the soft key 4 with the displayallocation “SYNC” repeatedly until “AU-TOSYNC” appears on the display.

Once “AUTOSYNC” has been selected anda station with the RDS time function (RDS-CT) or the DCF-77 signal has been received,the clock is set automatically.

Or

Hold down the DIS button : for morethan five seconds when in radio mode.

Note:If it is not possible to receive a DCF-77 sig-nal, “NO DCF” will appear briefly on the dis-play.

If you do not wish to set the time automatical-ly (e.g. because you wish to set the clock to adifferent time zone),

select “SYNC OFF”.

CD CHANGER MODE CLOCK

68

Setting the time manuallyTo set the time manually,



press the soft key 4 with the displayallocation “SET”.

The time appears on the display. The hoursflash and can now be set.

Set the hours using the / buttons7.

Once the hours have been set, pressthe button 7.

The minutes now flash.

Set the minutes using the / buttons7.


Selecting the 12/24-hour clockmode Press the MENU button 8.

Press the soft key 4 with the displayallocation “CLK”.

Press the soft key 4 with the displayallocation “MODE”.

Press the buttons 7 to switch be-tween the 12 and 24-hour mode.


Viewing the clock even when carradio is switched offTo view the clock when the car radio isswitched off and the ignition is switched on,



press the soft key 4 with the displayallocation “VIEW”;

press the buttons 7 to switch be-tween “CLK ON” OR “CLK OFF”;


CLOCK

69

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

EqualizerThis car radio is fitted with a parametric digi-tal equalizer. In this case, parametric meansthat for each of the two filters, one frequencycan be individually raised or lowered (GAIN+8 to - 8dB).The following filters are available:

LOW EQ 32 - 500 Hz

High EQ 630- 10 000 Hz

These filters can be set without measuringequipment. This means that the sound quali-ty inside the vehicle can be greatly influenced.

Notes on adjusting the equalizerWe recommend you use a CD or cassetteyou are familiar with (depending on your carradio’s capabilities) when adjusting the equal-izer.

Before adjusting the equalizer, set the toneand volume balance to zero and deactivatethe loudness function. To do this, please seethe chapter “Tone and volume balance”.

Listen to a CD or cassette (dependingon your car radio’s capabilities).

Evaluate the tone impression accordingto your taste.

Now consult the chart “An aid to adjust-ing the equalizer” under “Sound impres-sion”.

Set the equalizer values as describedunder “What to do”.

Switching the equalizer on/offIn order to switch off the equalizer,


Press the soft key 4 with display allo-cation “DEQ”.

The setting last selected appears on the dis-play.

Press the button 7.

“DEQ OFF” appears on the display.


In order to switch off the equalizer,


Press the soft key 4 with the displayallocation “DEQ”.

“DEQ OFF” appears on the display.

Press the button 7.

The last active setting appears on the displaybefore the unit is switched off.


Setting the equalizer Press the AUD button 9.


Press the soft key 4 with the displayallocation “LOW” or “HIGH” for the cor-responding filter.

To select the frequency, press the or button 7.

Set the level using the or button7.

To select the other filter, press the softkey 4 with the corresponding displayallocation.

When all the settings have been selec-ted, press the AUD button 9.

Setting the quality factor of thefilter Press the AUD button 9.


Press the soft key 4 with the displayallocation “LO Q” or “Hi Q” to select thequality factor for the LOW or HIGH filter.

To select the quality, press the or button 7.

EQUALIZER

70

To select the other quality factor, pressthe soft key 4 with the correspondingdisplay allocation.

When all settings have been selected,press the AUD button 9.

Select sound presetYou can preselect sound settings for the fol-lowing musical styles:

ROCK

POP

JAZZ

CLASSIC

VOCAL

The settings for these musical styles are pre-programmed.



Press the soft key 4 with the displayallocation “EQ”.

Select the desired sound preset usingthe or button 7.

When all the settings have been selec-ted, press the AUD button 9.

EQUALIZER

What to do

Raise bass withfrequency: 32 to 160 Hz, filter: “LOW”level: +4 to +6 dB

Reduce lower mid-section withfrequency: 400 Hz, filter: “LOW”level: approx. -4 dB

Reduce mid-section withfrequency: 1,000 to 2,500 Hz, filter: “HIGH”,level: -4 to -6 dB

Raise tweeter range withfrequency: 6,300 to 10,000 Hz, filter: “HIGH”,level: +2 to +4 dB

Setting aid for the equalizerSound impression/problem

Bass reproduction too weak

Impure bassBoomingDisagreeable pressure

Sound very dominant,aggressive, no stereo effect

Muffled reproductionLow transparencyNo instrumental brilliance

71

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

TMC for dynamicnavigation systemsTMC denotes “Traffic Message Channel”. Traf-fic announcements are transmitted digitallyvia TMC and can therefore by used by suita-ble navigation systems for route planning. Yourcar radio has one TMC output for connectionto Blaupunkt navigation systems. Your Blau-punkt dealer will tell you which navigationsystems can be used with your car radio.

When a navigation system is connected anda TMC station received, “TMC” lights up onthe display.

Pre-amplifiersExternal pre-amplifiers and a subwoofer canbe connected via the appropriate lines of yourcar radio.We recommend the use of matching prod-ucts from the Blaupunkt or Velocity ranges.

Switch-on delay for external pre-amplifierYou can define a switch-on delay for pre-am-plifiers connected to the pre-amp output line.The switch-on delay can be set at between250 ms (“DELAY 1”) to 2.25 seconds (“DE-LAY 9”).



Press the soft key 4 with the displayallocation “DLAY”.

Press the or button 7 to set theswitch-on delay.


PRE-AMPLIFIERSTMC

72

Subout/subwoofer

Setting the frequency and levelfor the subwooferYou can set the frequency and amplifier levelfor a connected subwoofer. The settings youmake depend on the hifi system in your carand the power of your subwoofer. Experimentto find your ideal setting.



Press the soft key 4 with the displayallocation “SUB”.

Press the or button 7 to selectbetween the frequencies “80 Hz” and“100 Hz”.

Set the desired amplifier level using the or button 7.


High-pass filter

Setting the high-pass filterIf a subwoofer is connected to your car radio,you can use a high-pass filter (HP-F) to sup-press the output of lower frequencies throughthe internal final amplifier and an external pre-amplifier that may be connected. This filterhas five adjustment levels. The settings de-pend on the unit installed in your car. Experi-ment to find your ideal setting.



Press the soft key 4 with the displayallocation “HP-F”.

Press the or button 7 to switchthe high-pass filter on/off.

When the high-pass filter is activated,

select the desired amplifier filter, “FIL-TER1” - “FILTER5” using the or button 7.


HIGH-PASS FILTERSUBOUT/SUBWOOFER

73

DE

UT

SC

HE

NG

LIS

HF

RA

NÇ

AIS

ITA

LIA

NO

NE

DE

RLA

ND

SS

VE

NS

KA

ES

PAÑ

OL

POR

TUG

UÊS

TECHNICAL DATAEXTERNAL AUDIO SOURCES

External audio sourcesInstead of the CD changer, you can also con-nect up a different external audio source witha line output. Such sources can be, for exam-ple, portable CD players, MiniDisc players orMP3 players.The AUX output has to be switched on in theinstall menu.To connect up an external audio source, youwill need an adapter cable, obtainable fromany Blaupunkt dealer.

Switching the AUX input on/off Hold down the MENU button 8 until

the install menu appears on the display.

Press the soft key 4 with the displayallocation “AUX”.

When “AUX” appears on the display, the in-put is already activated.

Press the or button 7 to switchAUX on or off.


Note:When the AUX input is switched on, it can beselected using the CDC button =.

Technical data

AmplifierOutput power: 4 x 25 watts sine in

accordance withDIN 45 324 at 14.4V,4 x 45 watts max.power

TunerFrequency ranges:FM : 87,5 – 108 MHzMW : 531 – 1 602 kHzLW : 153 – 279 kHz

FM transmission range:30 - 15 000 Hz

CDTransmission range:

20 - 20 000 Hz

Pre-amp output4 channels: 5 V / 10 kΩ

AUX inputInput sensitivity: 1,2 V / 10 kΩ

Subject to changes!

Documents

London CD70