Upload
log-max-ab
View
361
Download
17
Tags:
Embed Size (px)
DESCRIPTION
Log Max Harvester Head catalog
Citation preview
HARVESTING HEADSPRODUCT CATALOG
MADE IN SWEDEN
928A / 4000B / 5000D / 6000B / 6000 TWIN / 7000C / E6
Table of contents
Presentation p. 3
Product range overview p. 4-5
Design & Key components for success p. 6-13
Log Max harvesting heads & head specifications p. 14-31
Control system & accessories p. 32-34
Dealers p. 35
2 Harvesting heads - Log Max
LOG MAX, OVER 30 YEARS OF SERVINGTHE GLOBAL FORESTRY INDUSTRY
Over the years Log Max has become one of the most significant manufacturers of single grip harvesting heads. The Swedish forest industry is on the cutting edge of technology and equipment, this resulting in our product being sold around the world.The aim of everybody involved at Log Max, from the staff through to our partners and distributors, is to ensure that the professional loggers’ choice of Log Max is based on satisfaction and quality.
Therefore state-of-the-art quality and competence to induce high productivity combined with a concern for a long term environmental awareness is our mission statement.
The Log Max way to success
• Aproductoftechnicalexcellenceandperformance.• Thecompanyiswell-knownandwell-reputedinthe industry.• Well-experiencedtechnicalsupportandcustomercare.• ConcentratedworkwithISO/qualityassuranceinevery ongoing process.• Continuousstaffeducationregardingcommitmentand understandingofeachcustomer’sworkandrequirement for profitability.
Alltogether, this has made Log Max an established brand world wide.
Micael OlssonCEO,LogMaxAB
Log Max - Harvesting heads 3
4 Harvesting heads - Log Max
LOG MAX HEADS ARE DESIGNED FOR HEAVY USAGE AND DEPENDABILITY. WITH HIGH AND RELIABLE PERFORMANCE, LOG MAX WILL BOOST PRODUCTION UNDER ANY CONDITIONS.
Balanceandlowimpactfeeding
To facilitate harvesting, Log Max heads are designed to hang vertically when in “Tilt-Up”position,whichmakespositioningtostanding trees easier.
The roller arm and roller arm cylinder geometry increases leverage with increasing trunkdiameter.Thisgiveshigherrollerpressureonlargertrunks,whentractionisneeded, and promotes minimal crushing of fiber leading to higher quality timber.Thefeedrollersalwaysworkperpendicularto the tree, as opposed to using angled rollerarmstohelpcarrythetrunk.This limits frictionlossesandbarkscraping.
LogMaxpatentedknifecontrolwhichminimizes friction combined with the feed roller geometry and unique compound curve delimbingknifeprofileprovidesoutstandingstem coverage and increased log quality.
Durability and dependability
Insteadofcomplicatedsolutions,LogMaxharvesting heads use reliable standard machine components with long-term lubrication intervals, for example on bushings.
Allshaftsandpinsaremadeofnitrogenhardened steel and all bearing fittings are made of high tensile Swedish steel.
The frame design with short stress flows makesaLogMaxHeadlesssusceptibletometal fatigue. These features provide an extremely durable harvesting head with low weight, long life expectancy and low maintenance costs.
Productivity and profitability.
Sinceallmarketshavedifferentdesignrequirements, our product development and ability to adapt has given Log Max a significant advantage in many corners of the world.
LogMaxalwaysworkscloselywiththecustomers to provide the best possible solutions for every contractor’s needs.
Log Max lets you run your rubber tired or trackedmachinewiththebestandmostdependable headonthemarket.
Log Max heads are designed for installation on various types of carriers. Low weight is essential for the CTL-method using wheeled harvesters. This has resulted in Log Max being top of the range when comparing pulling force to weight ratio.
928A 4000B
6000B / 6000 TWIN
7000CE6
5000D
Product range overview, a head set for every application
Log Max - Harvesting heads 5
Designedto boost productionunder any conditions.
Log Max - Harvesting heads 7
8 Harvesting heads - Log Max
Wellbuilt
Allthepartsthatformtheframeareweldedtogether to create a one core component.ShortstressflowsmakestheLogMaxheadsless susceptible to metal fatigue.
The elimination of potential critical points in the structure enhances the compactness and the capacity to respond to strains.
The power from the hydraulic motors dis-tributesmoreuniformlyintheframemakingitmorereactive,andineffectkeepstoaminimum the waste of hydraulic energy for optimal delimbing.
Technology
Allshaftsarenitrogenhardenedandmounted in hard bronze bushings. This together with modern welding techniques and high quality steel provide an extremely durable harvesting head with low weight, long life expectancy and low maintenance costs.
For the future
Our construction engineers are regularly intheforestcollectingimportantfeedbackfromLogMaxuserstokeepimprovingourharvesting heads.
The perfect frame must be balanced and durable, that’s why our frame design has been refined to perfection with accurate and stable handling at high delimbing speeds.
WHY ARE LOG MAX HEADS SO GOOD?A SIMPLE DESIGN CONSTANTLY IMPROVED
Log Max - Harvesting heads 9
Weusetwotypesoffellinglinks,afullywelded Swedish steel closed box integrating two forged steel elements, the rotator fixture forthebestlinkagetothecraneandthebottom hinge connecting the frame.
Hydraulic System
The Log Max hydraulic system is engineered with simplicity and serviceability in mind, from the placement of the hydraulic components to the hose routing.
The hydraulic system is easily accessed for service through a tilt open cover, which requires no tools to open. Powerful feed roller motors provide high efficiency and low hydraulic losses.
Acaststeellinkisalsoavailableforthethoughestconditions.Thecastlinkismounted on all XT series heads, 6000 Twin and also on the latest eucalyptus head, the Log Max E6.
Measuring
The length measuring wheel is placed in the center of the frame between the rollers for accurate length measuring and high timber quality. The geometry of the roller arms is designed to increase the pressing force againstthetrunkwithincreasingoffsetfromthe center, i.e. the rollers always strive to center the tree over the measuring wheel.
Diameter measuring is calculated using sensors in both feed roller arms, which records diameter every 10 cm.
Cutting System
High performance saw hydraulics provide full flow to the fully enclosed saw motor for fast cutting,reducingtheriskofcrackformation.
Thefellinglinkisbuiltasaclosedboxwhichprovides high torsional strength.
The hydraulic system has been improved to increase efficiency and reduce hydraulic losses.
Smart hydraulics
Strong felling link
Floating adjustable top knife
Delimbing knives
LogMaxpatendedknifecontrol
Builtfromthehighestqualitysteel
LogMaxpatentedknifecontrolautomaticallyadjuststheknivestocraddlethetrunkduring feeding without pressing the tree up against the frame, allowing it to flow easily through the head.
Thankstothepatentedknifecontrol,theneed for extra frame mounted rollers is eliminated. Log Max harvesting heads utilize long low-friction glide plates which provide higher available delimbing force and lower fuel consumption.
Thefloatingtopknifecomesintwoversionsthat can either be adjustated manually on the head or automatically from the harvesterscontrolsystem-ActiveFrictionControl.
Log Max heads are mounted with three delimbingknives,twoatthetopandonelowerknifewhichisdoubledontheLogMax6000 Twin and E6 for optimal delimbing from tip to tip.
Builtfromselectedsteel,thestrenghtanddurabilityofthesekniveshasbeenprovenovertheyears.Withalongcuttingedgethe limbs are sheared off instead of beeing rippedoutorbrokenoffforahigherlogquality.
10 Harvesting heads - Log Max
Feed rollers
Builtfromonelathedsteelcylinder,ourfeedrollerswill remain perfectly round over the years.
Log Max - Harvesting heads 11
V-Steel EucalyptusLow impact feeding, the feed rollers always workperpendiculartothetree,whichhasfor benefit to minimize friction losses and roller penetration. This geometry also ensures accurate lenght measuring for high quality timber.
Available for all Log Max heads.
Log Max Eucalyptus rollers have angled edgesfordebarkingaseucalyptusdemandscompletedebarkingwhenfelling.
These rollers are avaiable for Log Max 4000/5000/6000/7000.
Byplacingthestudbarsinangledrows,Log Max has obtained a self cleaning feed roller with very high pulling force both in forward andreverse,withoutriskofspinning.TheV-steelAggressiverollerhasstudsthatsinkdeeperinthetreetrunk.
Available for all Log Max heads.
V-SteelAggressive
Easy access
Serviceabilityisoneofthekeyissuesthatdetermineproductivity.LogMaxharvestingheadsare easily accessed for service through the large tilt open cover, which requires no tools to access or open.
WhenorderingaLogMaxHead,asetofcustomisedservicetoolsisincluded,aswellasaproduct manual containing maintenance guide, troubleshooting guides and a complete spare parts list.
Tokeepservicetoaminimum,allLogMaxheadsaretestedandfine-tunedatthefactorybeforedelivery.Allheadfunctionsaretestedaccordingtocarefullyestablishedprotocols.
Professional technicians
Wheninneedoftechnicalsupport,LogMaxoffersateamofspeciallytrainedservicepersonnel.ItisimportanttoLogMaxthatourcustomersfeelconfidentwhencontactingourtechnicians,toprovidethebestsolutionstosucceedbothintheirworkandproduction.
Log Max uses Control system simulators to guide customers with step by step troubleshooting, but also offer on-site support when needed.
Technical training
Log Max offers technical training on all Log Max harvesting heads and control systems. The training sessions have both theoretical and practical elements.
The training is individually adapted to suit the customer’s needs. On-site training can be helpfulbecauseitwillallowourteamtogainbetterknowledgeofhowthecustomer’smachineworksintheirenvironment.
Asareliablepartnerwholistenstoitscustomers,weofferyouprofessional assistance so that you can focus on your special expertise, profitable harvesting.
RELIABLE SERVICE AND SUPPORT,WITH CUSTOMER IN FOCUS
12 Harvesting heads - Log Max
Withsubsidariesonthreecontinentsanddealersalloverthe world, Log Max is always close to the customer.
Worldwidesupport
TheLogMaxtechnicalsupportdivisionworkscloselywithallLogMaxdealerstosupplycontinous training and support. Thisgivescustomerstheopportunitytoreceivequickandefficientservicenomattertheirlocation.
Withdealer/customersuggestionsinmind,ourLogMaxsupporttechniciansworkcloselywith the design department to develop new features and models.
Customer focus
WestrivetomakethecustomerconfidentinchoosingLogMaxproducts.Tohonorthecustomer’strustininvestingintheirfuture,weworkhardtoprovideahighqualityproduct.Improvementsaremadeusingongoingresearchandcustomerfeedback. Indoingthat,LogMaxgivesthecustomerachancetoincreaseproductionandimprovetheenvironment in their area.
Log Max - Harvesting heads 13
14 Harvesting heads - Log Max
The combinationof strength , flexibility and
reliability
Log Max - Harvesting heads 15
The combinationof strength , flexibility and
reliability
0 5 10 15 20 25 30 35 40 45 in
928A
1 2
The Log Max 928 features a hydraulically driven saw with pressure controlled sawing force and flow controlled chain speed.
The high performance saw hydraulics provide full flow to the bottom saw resulting in fast cutting. This saw unit is able to fell trees up to 420 mm.
LOG MAX TECHNOLOGY AND DESIGNAVAILABLE FOR SMALL CARRIERS
Thiscompactheadweighsinatonly407 kg(897 lbs) in its standard configuration but still generates a powerfull feed force of over1,5tons(3,350lbf ).Thisthankstothetwo hydraulically driven rollers which are mounted directly on radial piston motors with 365 cc (24.2 cu in) displacement.
TheLogMaxpatentedknifecontrolsystemminimizes feed friction and the unique compoundcurvedelimbingknivesprovidethe Log Max 928 with an outstanding stem coverage and increased log quality.
7-15 tons 6,5-13 tons 40-60 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std
Log Max 928 is a small and light head specifically designed for thinning.
Thecompactformatmakesittheobviouschoiceforsmall-sizedwheelandtrack-basedharvesters
in the 7 to 15 ton range.
16 Harvesting heads - Log Max
928A
Log Max - Harvesting heads 17
Specifications
“Log Max 928 is perfect for thinning
and is extremely reliable.”
säger Jan Flink, Ludvika Bygg & Transport
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 050 mm 41.3’’Min width with arms closed 815 mm 32’’Height 1 043 mm 41’’Weight1 407 kg 897 lbs
FELLING / CUTTING*
Hydraulically driven chain saw with pressure controlled feed force.Chain oil tank in frame with 34 liters capacity.
Saw type F11 - 10cc F11 - 10ccSaw chain 0,404 pitch 0,404 pitchBar lenght 48 cm 18.9’’Maximum cut capacity 42 cm 16,8’’
DELIMBING
Four movable knives with patented positioning to minimize friction losses, wich increases the active pulling force.
Max delimbing knife opening 365 mm 14.3’’Max full coverage delimbimg diameter2 275 mm 10.8’’Min full coverage delimbing diameter 20 mm 0.8’’
ROTATOR
Indexator GV3 with 360˚ rotationIndexator GV3 with 360˚ rotation
FEEDING Metric Imperial
Two hydraulically driven rollers mouted directly on radial piston motors, 365 cc / 22.3 cu.in.
Feed roller diameter, V-Steel 338 mm 13.3’’Feed roller diameter, Steel 338 mm 13.3’’Calculated feed force1 14,9 kN 3,350 lbfCalculated feed speed2 3,0 m/sec 9.9 ft/secMaximum roller opening 340 mm 13.4’’Minimum roller opening 8 mm 0.3’’
HYDRAULICS
Maximum pressure 210 bar 14.5’’Maximum flow 140 l/min 37 gpm
Min. requirements for acceptable performance: 120 l/min 31.7 gpm
CONTROL SYSTEM
Log Mate 402 / CabsWin / MAXI / DASA4 / MOTOMIT / DSP4000 / TJ3000
FEED ROLLERS OPTION
SteelV-Steel
OPTIONAL EQUIPMENT
Active Friction ControlField repair kitStump treatmentSnow and dust cover
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers and cushioned protection plate / 2) Incl. bottom knife / 3) Calculated at 210 bar pressure / 4) Calculated at 140 l/min flow
1 20 5 10 15 20 25 30 35 40 45 in
4000B
LogMax4000B,alightweightall-roundharversting head, is designed to carry out a wide range of harversting jobs from the first thinning to light regeneration harversting.
Hydraulically driven by two 398 cc (24.3 cu in) radialpistonmotors,LogMax4000Bfeedrollers have over 2 tons (4,384 lbf ) of feed force.
TheLogMax4000Bisequippedwithlargeraccumulators which improves length and diameter measuring.
A COMPACT HAVERSTING HEADWELL SUITED FOR LONG-REACH BOOM
This head can be equipped with a accumulationkitformulti-stemmingandthankstooitslightweightthisheadiswellsuited for long-reach booms.
AllthesefeaturescombinedwithLog Maxpatentedknifecontrolsystem,whichminimizes feed friction, provides an outstanding stem coverage and increased log quality.
12-16 tons 11-18 tons 100-130 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std
LogMax4000Bisasmallheadwithlargecapacity.Theimpressivepullingforcecomparedtothecompact
formatmakesLogMax4000Btheobviouschoiceforlong-reachbooms.
18 Harvesting heads - Log Max
4000B
Log Max - Harvesting heads 19
Specifications
“Simple and relaible harvesting
headsthatalwaysworks.Tohaveto
repair a Log Max is very uncommon.”
says Tomas Forsell, TF Flis AB
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 071 mm 42.2’’Min width with arms closed 896 mm 35.3”Height 1 295 mm 51”Weight1 602 kg 1,327 lbs
FELLING / CUTTING*
Hydraulically driven chain saw with pressure controlled feed force. Chain oil tank in frame with 4.1 liters capacity / 0.8 gallon.
Saw type Saw 98B/98XL/F2Saw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 59/60/59 cm 23.2’’/23.6’’Maximum cut capacity, std/opt 50/51/49 cm 19.7’’/20.1’’
Optional saw:
Saw type Saw 211Saw motor 19 cc 1.16 cu.inSaw chain ¾ pitch ¾ pitchBar lenght, 56 cm 22’’Maximum cut capacity, 48 cm 18.9’’
DELIMBING
Four movable knives with patented positioning to minimize friction losses, wich increases the active pulling force.
Max delimbing knife opening 473 mm 18.6’’Max full coverage delimbimg diameter2 355 mm 14’’Min full coverage delimbing diameter 25 mm 1’’
ROTATOR
Indexator AV12S with 360˚ rotationIndexator H132 with 360˚ rotation
FEEDING Metric Imperial
Two hydraulically driven rollers mouted directly on radial piston motors, 398 cc / 24.3 cu.in
Feed roller diameter, Steel 344 mm 13.5’’Feed roller diameter, V-Steel 344 mm 13.5’’Calculated feed force3 19,5 kN 4,384 lbfCalculated feed speed4 4,3 m/sec 0-14.1 fpsMaximum roller opening 395 mm 15.6’’Minimum roller opening 12 mm 0.5’’
HYDRAULICS
Maximum pressure 250 bar 3,626 psiMaximum flow 210 l/min 55.5 gpm
Min. requirements for acceptable performance: 150 l/min 39.6 gpm
CONTROL SYSTEM
Log Mate 402 / CabsWin / MAXI / DASA4 / MOTOMIT / DSP4000 / TJ3000
FEED ROLLERS OPTION
SteelV-Steel
OPTIONAL EQUIPMENT
Active Friction ControlField repair kitColor markingFixed protection plateStump treatmentRod coverRotator control
Find end sensorAccumulation kitAutomatic Chain Tensioner (F2)Snow and dust coverHose holder
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers and cushioned protection plate / 2) Incl. bottom knife / 3) Calculated at 250 bar pressure - 3,626 psi / 4) Calculated at 210 l/min flow - 55.5 gpm
1 2 30 5 10 15 20 25 30 35 40 45 in
5000D
Log Max 5000D, the latest update of our previous big seller is designed to carry out a broad range of harversting jobs, from thinning to medium final cut.
The Log Max 5000D can be equipped with anaccumulationkitformulti-stemminganda Hultdins Supercut saw.
Wellplacedguardsandheavy-dutycoversprotect internal components and hoses from damage. High performance saw hydraulics provide full flow to the bottom saw for fast cutting.
A VERSATILE HEAD,FROM THINNING TO MEDIUM FINAL CUT.
Thepatendedtopknifesensorallowsthetrunktofloweasilythroughthehead.Thetrunkisneverpressedupagainsttheframeof the harvesting head instead it is cradled andcarriedbytheknives.Thisreducesfriction losses and provides higher delimbing force,keepingalowerfuelconsumption.
16–21 tons 15–20 tons 140–170 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std3. Max cutting diameter, opt
Log Max heads are designed for installation on various types of carriers. Low weight is essential in our
state-of-the-art design, given the fact that the CTL-method mostly uses wheeled carriers.
20 Harvesting heads - Log Max
5000D
Log Max - Harvesting heads 21
Specifications
“Wehavenotexperienced
anyproblems.It’saperfect
combination together with my
Valmet harvester.”
says Karl-Jonas Olsson, For Tree AB
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 375 mm 54.1’’Min width with arms closed 1 063 mm 41.9’’Height 1 483 mm 58.4’’Weight1 891 kg 1,964 lbs
FELLING / CUTTING*
Hydraulically driven chain saw with pressure controlled feed force. Chain oil tank in frame with 20 liters capacity / 5.3 gallons.
Saw type Saw 98B/98XL/Hultdins Supercut
Saw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 64/75 cm 25.2’’/29.5’’Maximum cut capacity, std/opt 57/63 cm 22.4’’/24.8’’
Optional saw:
Saw type Saw 211Saw motor 19 cc 1.16 cu.inSaw chain ¾ pitch ¾ pitchBar lenght, std/opt 64 cm 25.2’’Maximum cut capacity, std/opt 56 cm 22’’
DELIMBING
Four movable knives with patented positioning to minimize friction losses, wich increases the active pulliong force.
Max delimbing knife opening 573 mm 22.6’’Max full coverage delimbimg diameter2 415 mm 16.3’’Min full coverage delimbing diameter 30 mm 1.2’’
ROTATOR
Indexator AV12S with 360˚ rotation Indexator H132 with 360˚ rotation
FEEDING Metric Imperial
Two hydraulically driven rollers mouted directly on radial piston motors :
Feed roller diameter, V-Steel 426 mm 16.77’’Feed roller diameter, Steel 432 mm 17’’Feed roller diameter, Eucalyptus 436 mm 17.2’’Two hydraulically driven rollers 565 - 680 - 560 - 625 cc 34.5 - 41.5 - 34.1 - 38.2 cu.inCalculated feed force3, std/opt 21,3 - 25,6 - 21,1 - 23,6 kN 4,788 - 5,755 - 4,743 - 5,305 lbfCalculated feed speed4, std/opt 4,2 - 3,5 - 4,2 - 3,8 m/sec 13.8 - 11.5 - 13.8 - 12,4 fpsMaximum roller opening 515 mm 20.3’’Minimum roller opening 15 mm 0.6’’
HYDRAULICS
Maximum pressure 250 bar 3,626 psiMaximum flow 230 l/min 60.8 gpmMin. requirements for acceptable performance:
165 l/min 43.6 gpm
CONTROL SYSTEM
Log Mate 402 / CabsWin / MAXI / DASA4 / MOTOMIT / DSP4000 / TJ3000
FEED ROLLERS OPTION
SteelV-Steel
Eucalyptus
OPTIONAL EQUIPMENT
Active Friction ControlAccumulation KitEucalyptus equipementFixed protection plateField repair kitColor markingRotator control
Automatic Chain Tensioner (Hultdins Supercut) Hydraulic upper knifeFind end sensorRod coverHose holderSnow and dust cover
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers and cushioned protection plate / 2) Incl. bottom knife / 3) Calculated at 250 bar pressure - 3,626 psi / 4) Calculated at 230 l/min flow - 60.8 gpm
1 2 30 5 10 15 20 25 30 35 40 45 in
6000B
TheLogMax6000Bisbuiltonwellprovenhydraulics with a maximum hydraulic pressure of 260 bar (3 771 psi) and max flow of280l/min(74gpm).
Thefeedrollersalwaysworkperpendicularto the tree which has for benefit to minimize friction losses and roller penetration. This geometry alos ensures accurate lenght and measuring for high quality timber.
HARD-WEARING DESIGNBASED ON DECADES OF IMPROVEMENTS
Wellplacedguardsandheavy-dutycoversprotect internal components and hoses from damage. High performance saw hydraulics provide full flow to the bottom saw for fast cutting.
LogMax6000BcanbeequippedwithHultdins Supercut saw.
21-25 tons 18-22 tons 170-210 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std3. Max cutting diameter, opt
LogMax6000Bisalight-weighthead suitable for final felling. This head combines low weight with high
power and is especially designed for large wheeled carriers.
22 Harvesting heads - Log Max
6000B
Specifications
Log Max - Harvesting heads 23
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers and cushioned protection plate / 2) Incl. bottom knife / 3) Calculated at 260 bar pressure / 4) Calculated at 280 l/min flow
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 690 mm 66.5’’Min width with arms closed 1 180 mm 46.5’’Height 1 682 mm 66.2’’Weight1 1 299 kg 2,864 lbs
FELLING / CUTTING*
Hydraulically driven chain saw with pressure controlled feed force. Chain oil tank in frame with 34 liters / 9 gallons capacity.
Saw type Saw 98B/98XLSaw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 75/82 cm 29.5’’/32.3’’Maximum cut capacity, std/opt 65/72 cm 25.6’’/28.3’’
Optional saw:
Saw type Hultdins SupercutSaw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 75/82 cm 29.5’’/32.3’’Maximum cut capacity, std/opt 65/72 cm 25.6’’/28.3’’
DELIMBING
Four movable knives with patented positioning to minimize friction losses, wich increases the active pulliong force.
Max delimbing knife opening 690 mm 27.2’’Max full coverage delimbimg diameter2 500 mm 19.7’’Min full coverage delimbing diameter 35 mm 0.7’’
ROTATOR
Indexator AV12S with 360˚ rotation Indexator AV17 with 360˚ rotation Indexator H132 with 360˚ rotationIndexator H172 with 360˚ rotation
FEEDING Metric Imperial
Two hydraulically driven rollers mouted directly on radial piston motors, 857 cc or 934 cc. / 52.3 cu.in or 56.7 cu.in
Feed roller diameter, V-Steel 532 mm 20.9’’Feed roller diameter, Steel 532 mm 20.9’’Feed roller diameter, Eucalyptus 538 mm 21.2’’Calculated feed force3, std/opt 26,9/29,3 kN 6,047/6,857 lbfCalculated feed speed4, std/opt 4,2/3,9 m/sec 13.8/12.8 fpsMaximum roller opening 625 mm 24.6’’Minimum roller opening 17 mm 1.4’’
HYDRAULICS
Maximum pressure 260 bar 3,771 psiMaximum flow 280 l/min 74 gpmMin. requirements for acceptable performance: 200 l/min 52.8 gpm
CONTROL SYSTEM
Log Mate 402 / CabsWin / MAXI / DASA4 / MOTOMIT / DSP4000 / TJ3000
FEED ROLLERS OPTIONS
SteelV-Steel
Eucalyptus
OPTIONAL EQUIPMENT
Active Friction ControlAccumulation KitAutomatic Chain Tensioner (Hultdins Supercut)Eucalyptus equipementFixed protection plateField repair kitRotator control
Hose holderColor markingHydraulic upper knifeFind end sensorStump treatmentSnow and dust cover
“The reliability of the head is
something really special. Earlier,
downtimecausedbybroken
hoses and other repairs was
almost day to day business”
says Sven-Åke Arvidsson, S Å Arvidssons Skogsentreprenad AB
1 2 30 5 10 15 20 25 30 35 40 45 in
6000 TWIN
The delimbing unit is composed of five movablekniveswithpatentedpositioningto minimize friction losses and increase the active pulling force.
Thekniveshavewidecuttingedgesforhandlingthickbranches,theirshapeassuresgood delimbing and minimized damage to the log.
The unique compound curve delimbing knifeprofileprovidesoutstandingstemcoverage and increased log quality.
TWIN BOTTOM DELIMBING KNIVESFOR OPTIMAL COVERAGE
Log Max 6000 Twin can be equipped with Hultdins Supercut saw.
Log Max 6000 Twin is built on well tested hydraulics with a max hydraulic pressure of 260bar(3771psi)andamaxflowof280l/min (74 gpm).
21-30 tons 18-25 tons 170-210 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std3. Max cutting diameter, opt
Log Max 6000 Twin is a light-weight head suitable for “lowbranches”featuringatwinbottomknifefor
optimaldelimbingfromthelowestpartofthetrunktothetop. This head combines low weight with high
power and is especially designed for large wheeled carriers.
24 Harvesting heads - Log Max
6000 TWIN
Log Max - Harvesting heads 25
Specifications
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 690 mm 66.5’’Min width with arms closed 1 180 mm 46.5’’Height 1 927 mm 75.9’’Weight1 1 504 kg 3,316 lbs
FELLING / CUTTING*
Hydraulically driven chain saw with pressure controlled feed force. Chain oil tank in frame with 34 liters / 9 gallons capacity.
Saw type Saw 98B/98XLSaw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 75/82 cm 29.5’’/32.3’’Maximum cut capacity, std/opt 65/72 cm 25.6’’/28.3’’
Optional saw:
Saw type Hultdins SupercutSaw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 75/82 cm 29.5’’/32.3’’Maximum cut capacity, std/opt 65/72 cm 25.6’’/28.3’’
DELIMBING
Five movable knives with patented positioning to minimize friction losses, wich increases the active pulliong force.
Max delimbing knife opening 711 mm 28’’Max full coverage delimbimg diameter2 520 mm 19.7’’Min full coverage delimbing diameter 35 mm 0.7’’
ROTATOR
Indexator AV17 with 360˚ rotation Indexator H172 with 360˚ rotation
FEEDING Metric Imperial
Two hydraulically driven rollers mouted directly on radial piston motors, 857 cc or 934 cc. / 52.3 cu.in or 56.7 cu.in
Feed roller diameter, V-Steel 532 mm 20.9’’Feed roller diameter, Steel 532 mm 20.9’’Feed roller diameter, Eucalyptus 538 mm 21.2’’Calculated feed force3, std/opt 26,9/29,3 kN 6,047/6,857 lbfCalculated feed speed4, std/opt 4,2/3,9 m/sec 13.8/12.8 fpsMaximum roller opening 625 mm 24.6’’Minimum roller opening 17 mm 1.4’’
HYDRAULICS
Maximum pressure 260 bar 3,771 psiMaximum flow 280 l/min 74 gpmMin. requirements for acceptable performance: 200 l/min 52.8 gpm
CONTROL SYSTEM
Log Mate 402 / CabsWin / MAXI / DASA4 / MOTOMIT / DSP4000 / TJ3000
FEED ROLLERS OPTIONS
SteelV-Steel
Eucalyptus
OPTIONAL EQUIPMENT
Active Friction ControlAutomatic Chain Tensioner (Hultdins Supercut)Field repair kit
Find end sensorHydraulic upper knife Stump treatment
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers / 2) Incl. bottom knives / 3) Calculated at 280 bar pressure / 4) Calculated at 260 l/min flow
“Arealtimesaverwhenworking
with low branched trees.”
says Mike Peterson, Peterson Logging
1 2 30 5 10 15 20 25 30 35 40 45 in
7000C
Log Max 7000C is a large head for the really heavy timber. The head combines high power and high speed, and performs very wellinheavyandbranchytrunks.
Variable displacement feed roller motors provide fast speed in smaller wood and automatically regulate to provide more powerintougherlimbedtrees.Wellplacedguards and heavy covers protect internal components and hoses from damage.
RUGGED AND LIGHTWEIGHTFOR THE FINAL CUT!
High performance saw hydraulics provide full flow to the bottom saw for fast cutting in all timber sizes.
21-35 tons 18-25 tons 200-300 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std3. Max cutting diameter, opt
The Log Max 7000C harvesting head is built on a tough frame and combines high drive power and high
speed.Thisheadperformsverywellinheavyandbranchytrunks.
26 Harvesting heads - Log Max
7000C
Log Max - Harvesting heads 27
Specifications
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 950 mm 76.7’’Min width with arms closed 1 265 mm 49.8’’Height 1 742 mm 68.6’’Weight1 1 619 kg 3,569 lbs
FELLING / CUTTING*
Hydraulically driven chain saw with pressure controlled feed force. Chain oil tank in frame with 36 liters / 9.5 gallons capacity.
Saw type Saw 98B/98XLSaw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 75/82/90 cm 29.5”/32.3’’/35,4’’Maximum cut capacity std/opt 65/72/75 cm 25.5’’/28.3’’/29.5’’
Optional saw:
Saw type Hultdins SupercutSaw motor 19 cc 1.16 cu.inSaw chain 0,404 pitch 0,404 pitchBar lenght, std/opt 75/80/90 cm 29.5”/31.5’’/35,4’’Maximum cut capacity std/opt 65/69/75 cm 25.5’’/27.2’’/29.5’’
DELIMBING
Four movable knives with patented positioning to minimize friction losses, wich increases the active pulling force.
Max delimbing knife opening 772 mm 30.4’’Max full coverage delimbimg diameter 560 mm 22’’Min full coverage delimbing diameter 40 mm 1.6’’1) Note includes bottom knife
ROTATOR
Indexator AV17 with 360˚ rotation Indexator H172 with 360˚ rotation
FEEDING Metric Imperial
Standard: Two hydraulically driven rollers mouted directly on hub motors with a variable displacement :660 cc / 40.2 cu.in to 1320 cc / 80.55 cu.in. Option: Two hydraulically driven rollers mounted directly on radial piston type motors, 1147 cc / 69.99 cu.in.
Feed roller diameter, V-Steel 612 mm 23.8’’Feed roller diameter, Steel 612 mm 24.1’’Feed roller diameter, Eucalyptus 616 mm 24.3’’Calculated feed force3, std/opt 42.1/36.3 kN 9,464/8,160 lbfCalculated feed speed4, std/opt 5.2/3.9 m/sec 17/12,8 fpsMaximum roller opening 713 mm 28.1’’Minimum roller opening 13 mm 0,5’’
HYDRAULICS
Maximum pressure 300 bar 4,351 psiMaximum flow 300 l/min 79.3 gpmMin. requirements for acceptable performance: 200 l/min 52,8 gpm
CONTROL SYSTEM
Log Mate 402 / CabsWin / MAXI / DASA4 / MOTOMIT / DSP4000 / TJ3000
FEED ROLLER OPTIONS
SteelV-Steel
Eucalyptus
OPTIONAL EQUIPMENT
Active Friction ControlAutomatic Chain Tensioner (Hultdins Supercut)Eucalyptus equipementFixed protection plateField repair kitRotator control
Rod coverHose holderColor marking Hydraulic upper knifeFind end sensorSnow cover
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers and cushioned protection plate / 2) Incl. bottom knife / 3) Calculated at 300 bar pressure, 4,351 psi / 4) Calculated at 300 l/min flow, 79 gal/min
“LogMax7000isbuilttowork
in all conditions. Perfect for big
carriers.”
says Lars-Ove Pettersson, Tryllis Gräv och Skog
1 2 30 5 10 15 20 25 30 35 40 45 in
E6
28 Harvesting heads - Log Max
Log Max E6 is a brand new head specially developed for Eucalyptus harvesting.
Withangeledfeedrollersarmsthedebarkingprocess on Log Max E6 gets optimised .The frame has an idle support roller in its centertominimizefriction.Inthebottompartoftheframeafixeddelimbingknifehasbeenweldedin.Thisknifehasacontouroptimized for Ø200 - 400mm trees.
A PRODUCTIVE HARVESTING HEADDEVELOPED SPECIALLY FOR EUCALYPTUS
TheLogMaxpatendedknifecontrolsystemincreases productivity by minimizing feed friction. Unique compound curve delimbing knifeprofileprovidesoutstandingstemcoverage and increased log quality.
The new Log Max E6 is built with well tested components used in Log Max otherharvestingheads.Thismakessurethat Log Max E6 holds the same excellent quality and productivity as all other Log Max products.
31-35 tons 18-25 tons 200-300 kNm
Most productive range
1. Min delimbing diameter2. Max cutting diameter, std3. Max cutting diameter, opt
TheLogMaxE6headistheresultofteamworkandLogMaxexperience.
Thisheadhasbeendevelopedtomeetthedemandsofeucalyptusharvestingusingfivedelimbingknives
todebarkthelog.
E6
Log Max - Harvesting heads 29
Specifications
DIMENSIONS AND WEIGHT Metric Imperial
Max width arms open 1 700 mm 66.9’’Min width with arms closed 1 278 mm 50.3’’Height 1 927mm 75.8’’Weight (including eucalyptus rollers 124 kg) 1 569 kg 3,459 lbs
FELLING / CUTTING
Hydraulically driven chain saw with pressure controlled feed force. Chain oil tank in frame with 36 liters / 9.5 gallons capacity.
Saw type Saw 98B/98XLSaw motor 19 1.16 cu.inSaw chain 0.404 pitch 0.404 pitchBar lenght, std/opt 64/75 cm 25.2/ 29.5’’Maximum cut capacity std/opt 43/61,5 cm 16.9/ 24.2’’
Optional saw
Saw type Hultdins SupercutSaw motor 19 cc 1.16 cu.inSaw chain 0.404 pitch 0.404 pitchBar lenght, std/opt 64/75 cm 25.2/ 29.5’’Maximum cut capacity, std/opt 43/61,5 cm 16.9/ 24.2’’
DELIMBING
Five movable knives with patented positioning to minimize friction losses, wich increases the active pulling force.
Max delimbing knife opening 611 mm 30.4’’Max recommended delimbing diameter2 250 mm 22’’Min full coverage delimbing diameter 20 mm 1.6’’
ROTATOR
Indexator AV17S with 360˚ rotation Indexator H172 with 360˚ rotation
FEEDING Metric Imperial
Two hydraulically driven rollers mouted directly on radial piston type motors, 627cc. - 38.26 cu.in
Feed roller diameter, Eucalyptus 538 mm 21.2’’Calculated feed force1 19,5 kN 4,383 lbfCalculated feed speed2 5,8 m/sec 19 ft/secMaximum roller opening 560 mm 22’’Minimum roller opening 13 mm 0.5’’
HYDRAULICS
Maximum pressure 260 bar 3,770 psiMaximum flow 280 l/min 74 gpmMin. requirements for acceptable performance: 200 l/min 52 gpm
CONTROL SYSTEM
Log Mate 500
FEED ROLLER OPTIONS
Eucalyptus
OPTIONAL EQUIPMENT
Automatic Chain Tensioner (Hultdins Supercut)Field repair kit
Hydraulic upper knife
* Sound effect level . 110 dB(A) / 1) Incl. feed rollers / 2) Incl. lower knives / 3) Calculated at 280 bar pressure - 4350 psi / 4) Calculated at 260 l/min flow - 79.2 gpm
Accumulation Kit
LogMaxhasdevelopedaAccumulationKitthat can be fitted as an option to Log Max heads. This allows the head to be used as a combination head - both as a conventional harvester as well as a multi-stemming head for thinning smallwood or in late brush cuttings.
The accumulation unit opens wider than the maximum head opening between rollers, whichallowstroublefreecollectingoftrunksevenwhenworkingwithcrookedtrees.
SMART DESIGN AND LIGHTWEIGHT,LOG MAX PROVIDES FAST MULTI-STEMMING
TheAccumulationKitiscurrentlyavailabletoLog Max 4000, 5000 and 6000 series.
TheLogMaxAccumulationKitcanberunwithLogMate402,Motomit,CabsWin,Dasa 380, Ponsse Opti, Timbermatic and Valmet/KomastuMaxi.
LogMaxhasdevelopedaAccumulationKitwhichwillconsiderablyincreaseyourproduction.
ThiskitwillmakeyourLogMaxhaverstingheadunbeatableinmanysituations,fromthinningsmallwood
to late brush cuttings.
30 Harvesting heads - Log Max
Inner accumulating armHydraulically controlled from cab.
Support plateMounted on felling link
Outer accumulating armSpring loaded, Automatic
* Not available in Finland
1 2 3
4 5 6
LOG MAX ACTIVE FRICTION CONTROLThenewgenerationfloatingtopknifefeaturingActiveFrictionControlactivelycontrols and adjusts the amount of friction between the log and the harvesting head’s frame. There is no need to go out and change the settings by adjusting the unit, everything is now set automatically. Low
friction is desired as it leads to lower fuel consumption and heat generation. There is the exception of when delimbing heavily branched trees with small diameter limbs a higherfrictionminimizestheriskofsimplybending them flat.
The harvester’s computer is the brain of theActiveFrictionControlandbasedonyour settings, the Log Max head behaves optimally depending on tree species and diameter. For example, a thinning of pine and birch can behave quite differently based on tree species.
SpecificationsAccumulation KitAccumulation kit
Accumulationprocess
1. The accumulation head is positioned to grip the first tree.
4.Mainknivesclosetogripandcutsecond treeinoneoperation.Atthesametime the spring loaded accumulating arms collectthesecondtrunk.
2.Themainknivesandtheaccumulation arms are closed and the tree is cut.
5.Accumulationarmsclosed. Mainknivesopening.
3.Mainknivesopen,theheadispositioned to grip the second tree. The accumulation arms remain closed and holds the first trunk.
6. Head ready to grip and cut third tree.
Log Max - Harvesting heads 31
I’vegotsignificantriseofmy
productionsinceImountedthe
Accumulationkitsays Peter Larsson,
with Log Max since 2005
32 Harvesting heads - Log Max
CONTROL SYSTEM AND INTERFACE
Log Mate 402 Operator Display • New graphic screen display• Touch screen function selection• Time and date• Tree species and preset indicator• Current length and progress bar• Current diameter• Species and preset• Warning text such as “saw bar out”• Sensor operation indicators• Auto length preset change indicator• Back lit for easy reading• English or metric display
Automated Functions • Find end• Color marking• Previous/next preset length• Saw cut control• Auto reverse feed• Auto knife control• Mimimum diameter stop• Auto head tilt control• Auto length repeat and/or change• Auto braking length correction• Saw bar oiler control
Special Functions• Start up species display• Auto carrier pump de-stroke delay• Broken saw sensor programmable feed delay• Right and left diameter sensor deactivation
Reports • Volume and stem count per species• Volume per length• Production per operator
Diagnostics • All sensor functions• Input testing• Output testing
Log Mate 402isaneasytousecontrolsystemwithenhancedcapabilitiesandstateoftheartCANbus
communication for all head control functions.
Apowerfulhighperformancecontrollerrapidlyprocessesinformationforpreciseheadpositioningandcutting,highestqualitylogsareconsistentlymerchandised.Automaticcontrolofupto160presetlengthsanddiametersalongwithprogrammabletolerancesassuresfullconformance to a broad range of mill log specifications. High reliability is achieved through all solid state construction and triple voltage and short circuit protection.
Log Max - Harvesting heads 33
ThePonsseInterfacemakesitpossibletousedurableandreliableLog Max harvesting heads together with Ponsse Carriers.TheInterfaceiscompatiblewithPonsseOpti4andallsettingsandcalibration is done with the Opti4 computer as usual.ThePonsseInterfaceworkstogetherwithmanydifferentaccessoriessuchsastheAccumulationKit,colormarking,stumptreatmentetc.
Ponsse interface JohnDeere/TimberjackInterface
Valmet/KomatsuVU201interface
Advantages:• No electronic rebuilding of the carrier necessary• Easy to use
• Easy to install• Pulse encoders for diameter measuring
Advantages• Easy to use• Easy to install
• No electronic rebuilding of the carrier neces sary• CE-marked
Advantages• Easy to use• Easy to install
• No electronic rebuilding of the carrier neces sary• CE-marked
TakefullcontroloveryourLogMaxharvestingheadonyourTimberjackcarrierequippedwiththeoriginalTimberjackcontrolsystem.JohnDeere/TimberjackInterfaceisdevelopedforthebest control and possibilities for the Log Max harvesting heads togetherwithaTimberjack3000orTimbermatic300toincreasetheproduction.
TheValmet/Komatsuinterfacemakesitpossibletousethehi-tech,durableandreliableLogMaxharvestingheadtogetherwithValmet/Komatsucarriers.ItisapplicabletotheoriginalValmetcontrolsystemsMaxiandVMM2000,from1994andonward.TheInterfaceworksasaconverter,translatingthesignalsbetweenthesystemsineach direction.
ThisisaWindows-basedcontrolandmeasuringsystemusingCabsWinsoftwarethatiscertifiedforuseintheStanForDsystem.BeingaPC-basedhardware,anumberoffeaturessuchasGPS,internet connection etc. can easily be added. The PC-platform also enables easy upgrading to meet industry requests and demands.CabsWinhasaclear12”TFTtouchscreen.
CabsWinControlsystem
Advantages• Uses advanced CANbus technology• Has 2 USB ports, 2 Serial ports, 1 printer port and 1 PS/2 port• Easy-to-use graphical user interface• Value- and distributed cross cutting• Customizable automated head functions• Fully automatic bucking or manual with presets• Printable production reports
• Troubleshooting and real-time on screen monitoring• Extensive stem profile data collec tion possibilities• 6 species, 8 timber qualities,15 price matrices/specie, 20 length classes/ specie; numerous variables to fine tune the harvester head behaviour; detailed help files to explain each variable, if needed; and more..
WeofferthenecessaryinterfacetorunLogMaxheadsonallharversters
SPARE PARTS AND ACCESSORIES
Withsubsidiariesonthreecontinentsanddealersalloverthe world, Log Max is always close to the customer.
Colourmarking
To easier sort the timber after it is cut to length the color markingmakesitpossibletochoose four different variations ofmarking.
Snow cover
Rubber cover that prevents snowordebrisfromstackingupbetweenfellinglinkandheadprotection cover.
Find end sensor
Photo cell mounted in guard atthebackofthesawbox.Optically establishes end of cut logs eliminating need to cut a“pancake”toestablishtheend zero point when processing.
Processorknives
Processorkniveshavealongertip for easier hand ling when pickinglogsoutofadeck.
Rod Cover
Protects the rod on the wheel arm cylinders. Recommended on heads equipped with accumulation unit.
Filedrepairkit
Fieldrepairkitcontainsspareparts necessary for “simple” repairs on sensors, cylinders, EasyGreasy,saw,measuringwheel etc.
Hydraulicupperknife
Hydraulically controlled upper knife,retractablefromcab.Facilitates handling of logs when cutting with Full-Tree method, whendebarkingEucalyptusandwhenworkingwithtimberwithbrokentops.Alsobeneficial when using Log Max AccumulationKit.AvailableforLog Max 5000, 6000 and 7000.
Hosekit
TheLogMaxhosekitcontainsone complete set of replacement hoses and hose protective covers.AvailableforallLogMaxheads.
34 Harvesting heads - Log Max
FIND US AROUND THE WORLDAUTHORIZED DEALERS LIST
Withsubsidiariesonthree
continents and dealers all over
the world, Log Max is always
close to the customer.
Today, Log Max harvesting heads are operating in more than 30 countries. To maintain high quality service and support andtobeabletoworkcloselywithourcustomers, we co-operate with strategically located subsidiaries and dealers.
Log Max - Harvesting heads 35
EuropeAustriaLog Max GmbHZum Hutanger 391227 Leinburg-DiepersdorfGermanyTel: + 49 9120 180 99 [email protected]
BelgiumForêt Matériel ServiceZ.I. de Marville55600 MarvilleFranceTel: +33 (0)3 29 88 10 [email protected]
EstoniaKaevax OÜKaiavere KülaPalamuse Vald49102 JögevamaaEstoniaTel: + 372 534 879 [email protected]
FinlandEco Log OYc/o Petter SirkkaVesannontie 52844 350 IstunmäkiFinlandTel: +35 840 59 57 655
FranceForêt Matériel ServiceZ.I. de Marville55600 MarvilleFranceTel: +33 (0)3 29 88 10 [email protected]
GermanyLog Max GmbHZum Hutanger 391227 Leinburg-DiepersdorfGermanyTel: + 49 9120 180 99 [email protected]
IrelandRobinson Distribution Ltd.Portnahinch HousePortarlingtonCo. LaoisIrlandTel: +353 57 86 79 [email protected]
LatviaKaevax OÜKaiavere KülaPalamuse Vald49102 JögevamaaEstoniaTel: + 372 534 879 [email protected]
LithuaniaKaevax OÜKaiavere KülaPalamuse Vald49102 JögevamaaEstoniaTel: + 372 534 879 [email protected]
NetherlandsWaldburg Forstmaschinen GmbH
D-88364 WolfeggGrimmenstein 15GermanyTel: +49 75 27 96 81 [email protected]
NorwayEco Log Norge ASSteinsrudveien 5NO-23 35 StangeNorwayTel: +47 625 73 [email protected]
PortugalLog Max Iberia S.L.Ctra Huelva – San JuanDel Puerto, km 1021007 HuelvaSpainTel: +34 959 65 73 [email protected]
SpainLog Max Iberia S.L.Ctra Huelva – San Juan Del Puerto, km 1021007 HuelvaSpainTel: +34 959 65 73 [email protected]
SwedenLog Max ABStationsvägen 12SE-770 13 GrangärdeSwedenTel: +46 240 59 11 [email protected]
SwitzerlandWaldburg Forstmaschinen GmbHD-88364 WolfeggGrimmenstein 15GermanyTel: +49 752 796 81 [email protected]
United KingdomTreetop Forestry Ltd.Balmakewan WoodlandsLaurencekirk KincardineshireAB30 IQX, ScotlandU.K. Great BritainTel: +44 776 861 30 [email protected]
RussiaRussiaEast RussiaArkaimVanino, Khabarovsk Reg.14 Molodezhnaya Str.682 860 KhabarovskRussiaTel: +7 421 372 46 [email protected]
RussiaWest RussiaLog Max North-West LLCUlitza Sofiiskaya dom 14192236 St.PetersburgRussiaTel: +7 812 972 01 [email protected]
AfricaSouth AfricaAfrEquip (Pty) Ltd18A Shortts Retreat RoadMkondeniPietermaritzburgSouth AfricaTel: +27 35 787 [email protected]
NorthAmericaCanadaLog Max Forestry Inc.692 Babin StreetDieppe, N.B, E1A 5M1CanadaTel: +1 506 869 [email protected]
CanadaLog Max Forestry Service Inc.954D Laval CresentKamloops BC, V2C-5P5CanadaTel: +1 800 666 4474 [email protected]
USALog Max Inc.1114 West 4th Plain BoulevardVancouver, WA 98660USATel: +1 360 699 73 [email protected]
SouthAmericaBrazilRandon Veiculos LtdaAv. Abramo Randon, 66095055-010-Caxias Do Sul-RSBrazilTel: +55 54 3209 [email protected]
ChileLatin Equipment Chile S.A.Avda. Collao 1944, Casilla 22-CConcepciónChileTel: +56 41 91 61 [email protected]
VenezuelaVenequipZona Industrial Los PinosAvenida Principal Manzana 2.Edificio Venequip.Puerto Ordaz, Edo.Bolívar,VenezuelaTel: +58 (286) 980 23 00
AsiaBurmaPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
IndonesiaPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
LaosPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
MalaysiaPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
PhilippinesPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
ThailandPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
VietnamPartec Equipment87 Kaki Bukit Ave 1Shun Li Industrial ParkSingapore 417956Tel: +65 6295 53 [email protected]
OceaniaAustraliaLog Max Australia Pty LtdLot 10, Snowy Mountains Hwy,Tumut NSW 2720AustraliaTel: +61 269 47 45 [email protected]
New ZealandPorter Equipment LtdPO Box 10164Te RapaHamiltonNew ZealandTel: +64 7 849 [email protected]
Log Max AB - Stationvägen 12 - 770 13 Grangärde - Sweden - www.logmax.com
MADE IN SWEDEN
JL-20
12-0
8-00
1 - Sp
ecific
ation
s may
vary
depe
nding
on eq
uipme
nt se
lected
.We r
eserv
e the
right
to ma
ke ch
ange
s in pr
oduc
t spe
cifica
tions
with
out p
rior n
otice
.