Loctite - CAT Part Numbers

Maintenance solutions training guidenorth aMerican

for cat dealersdeceMber 2011

1

The Loctite® Product Selector Guide for Cat Dealers is your source for locating high-performance Loctite® adhesives, sealants, lubricants and cleaning compounds needed for the proper maintenance and repair of heavy duty equipment. This catalog will help you to make things better, faster and more cost-efficient. Loctite products help you tackle even the most difficult challenges that surface in keeping working machines working!

Henkel Corporation was chosen by Caterpillar as the adhesives and sealants supplier for many different reasons:

•OEM Partner

•Quality Products

•World Leadership & Availability

•Warranty Requirements

•Newest Innovative Products

These are the reasons why Caterpillar uses Henkel chemicals in their factories and why they are now making even more products available through this program – direct to the dealer.

solutions guide for cat dealers 2

threadlocking 3 Locking of Threaded fasTeners

thread sealing 7 seaLing Threaded componenTs

retaining 9 securing cyLindricaL assembLies

gasketing 11 seaLing of fLanges

lubricants 15 greases

anti-seize lubricants 17

cleaners, degreasers 19 & rust treatMent

bonding & repair 21 assembLing separaTe parTs

kits / special products / dispensing equipMent 27

application q&as 29 generaL, gaskeTing, ThreadLocking & bonding

engine applications 33

additional tech tips 35

loctite® product description index 43

caterpillar product nuMber index 46

table oF contents

3

Loctite® 222™ threadLockermedium sTrengThIdeal for fastener diameters of ¼" (6 mm) and smaller, long engagement length fasteners, and components requiring occasional adjustment. Apply to threaded parts before assembly. Controlled lubricity for accurate clamp loads. Parts can be disassembled with hand tools. Approved for use in or around food processing areas.

typical use: Small screws under ¼".color/Viscosity: Blue, Liquiditem container size pack22221 10 ml bottle 1022231 50 ml bottle 10

Loctite® 242® threadLockermedium sTrengThRemovable strength, general purpose threadlocking adhesive well suited for fasteners between ¼" and ¾" diameter (6 mm to 20 mm). Applied to threaded components before assembly, Loctite® 242® Threadlocker has controlled lubricity for accurate clamp loads. Parts can be separated using hand tools.typical use: ¼" to ¾" (6 mm to 20 mm)

fasteners.color/Viscosity: Blue, Liquiditem container size pack24221 (Cat # 4C-4030) 10 ml bottle 1024231 (Cat # 9S-3263) 50 ml bottle 10

loctite® 243™ threadlockersurface insensiTiveA general purpose, medium strength, blue threadlocker with improved oil tolerance. For fasteners between ¼" to ¾" (6 mm to 20 mm). Parts can be separated using hand tools.typical use: ¼" to ¾" (6 mm to

20 mm) bolts with light oil contamination.

color/Viscosity: Blue, Liquiditem container size pack1329837 10 ml bottle 10 (formerly 24077)

1329467 50 ml bottle 10 (formerly 24078)

threadlockingLocking of Threaded fasTeners

• Preventloosening from shock and vibration

• Singlecomponent–cleanand easy to apply

• Canbeusedonvarioussizesof fasteners – reduce inventory costs

• Sealthreads

• Stoprustandcorrosion

Tech

see page 35

threadlocking, thread sealing & retaining disasseMblyloW and MediuM strength products Disassemble with hand tools.

high strength products•Applylocalizedheat(500°Forhigher)toassemblyfor5minutes.•Disassemblewithhandtoolswhilehot.


loctite® 271™ threadlockerhigh sTrengThA high strength, low viscosity threadlocker for fasteners up to 1" (25.4 mm) in diameter.typical use: For fasteners up to 1"

(25.4 mm). color/Viscosity: Red, Liquiditem container size pack27121 (Cat # 154-9731) 10 ml bottle 1027131 (Cat # 155-0695) 50 ml bottle 10

loctite® 272™ threadlocker high TemperaTureWithstandstemperaturesto450°F(232°C).This high strength, red threadlocker is formulated for heavy-duty applications. Prevents bolts up to 1.4" (36 mm) from loosening due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance applications where extreme temperature resistance is required. Removable with heat and hand tools.typical use: High temperature applications.color/Viscosity: Red, Liquiditem container size pack27240 50 ml bottle 10

loctite® 277™ threadlockerLarge/heavy-duTy boLTsA high strength adhesive for locking and sealing large bolts and studs 1.5" (38 mm) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled.typical use: High strength for large bolts.color/Viscosity: Red, Liquiditem container size pack21434 10 ml bottle 1027731 50 ml bottle 10

loctite® quickstix® 248™ threadlockermedium sTrengThSemisolid stick form is convenient, portable and great for hard-to-reach applications. Loctite® QuickStix® 248™ Threadlocker – Medium Strength is the ideal general-purpose threadlocker for all nut and bolt applications, especially fasteners between ¼" and ¾" (6 mm to 20 mm). Removable with hand tools.typical use: ¼" to ¾" (6 mm to

20 mm) fasteners.color/Viscosity: Blue, Semisoliditem container size pack37684 9 g stick 1037087 19 g stick 5

loctite® quicktape™ 249™ threadlockermedium sTrengThThe one and only threadlocker in a tape form. This revolutionary product offers the same reliability and performance as Loctite® removable grade threadlocking liquids. Convenient, durable package is a must for every toolbox. It is easy to apply and can be preapplied for future assembly.typical use: ¼" to ¾" bolts, overhead

pre-dispensed.color/Viscosity: Blue, Tapeitem container size pack1372603 260" Roll 10

loctite® quickstix® 268™ threadlockerhigh sTrengThThis convenient semisolid stick form is portable and less messy. Its high strength prevents loosening of threaded fasteners. Well-suited for heavy-duty applications.typical use: For fasteners up to

¾" (20 mm).color/Viscosity: Red, Semisoliditem container size pack37685 9 g stick 1037686PR 19 g stick 5

Tech

threadlockingLocking of Threaded fasTeners

5

loctite® 7088™ quickstix® priMerA semisolid primer for metal for use with Loctite anaerobic threadlockers, thread sealers, gasketing and retaining products.item container size pack1069258 17 g stick 6

loctite® 7090™ priMer, actiVatorA solvent-free surface primer/activator designed to promote the cure speed of Loctite® anaerobic products. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps.item container size pack19368 1fl.oz.bottle 10

loctite® 7091™ priMer, actiVatorAnaerobic primer for increased bond integrity on dichromateelectroplatedandgalvanizedsteel.item container size pack18109 1 liter bottle 1

loctite® 7649™ priMer n™

A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.item container size pack21348 (Cat # 169-5464)4.5oz.netwt. 10 aerosol

loctite® 290™ threadlockerhigh sTrengThRecommended for locking pre-assembled fasteners, i.e., instrumentation screws, electrical connectors and set screws up to ½" (12 mm). Also seals porosities in welds and metal parts. Mil-Spec (S-46163A) Type III, Grade R. NSF/ANSI 61.typical use: Wicking grade for

pre-assembled parts.color/Viscosity: Green, Liquiditem container size pack29031 50 ml bottle 10

Tech

see page 35


loctite® product

item number

package size & type

Fastener size

strength/ use

cure time(Fixture/Full strength)

breakaway/ prevail torque

(lb./in.)

temperature resistance agency approvals

222™ 22221 22231

10 ml bottle 50 ml bottle

¼" (6 mm) diameter

Low strength 20 min. / 24 hrs. 53/30 -65°Fto300°F

(-54°Cto150°C) N/A

242® 24221 24231


¼" to ¾" (6 mm to 20 mm)

diameter

Medium strength 10 min. / 24 hrs. 110/43 -65°Fto300°F

(-54°Cto150°C)

MIL-S-46163A for existing designs, ASTM D-5363 for

new designs, NSF/ANSI 61, NSF P1, ABS, CFIA

243™ 1329837 1329467


¼" to ¾" (6 mm to 20 mm)

diameter

Bolts with light oil

contamination5 min. / 24 hrs. 180/62 -65°Fto300°F

(-54°Cto150°C) NSF/ANSI 61, CFIA

249™ 1372603 260" Tape ¼" to ¾" bolts

Medium strength 30 min. / 24 hrs. 74/47 -65°Fto300°F

(-54°Cto150°C) N/A

271™ 27121 27131


up to 1" (25 mm) diameter

High strength 10 min. / 24 hrs. 250/275 -65°Fto300°F (-54°Cto150°C)


new designs, UL® Classified for U.S., CFIA

272™ 27240 50 ml bottle

¼" to ¾" (6 mm to 20 mm)

diameter

High temperature applications

30 min. / 24 hrs. 325/320 -65°Fto450°F (-54°Cto232°C) CFIA

277™ 21434 27731

10 ml bottle 50 ml bottle Large bolts High strength 60 min. / 24 hrs. 275/275 -65°Fto300°F

(-54°Cto150°C)


new designs

290™ 29031 50 ml bottleup to ½"

(12.7 mm) diameter

High strength 20 min. / 24 hrs. 90/260 -65°Fto300°F (-54°Cto150°C)


new designs, NSF/ANSI 61, NSF P1, CFIA

quickstix® 248™

37684 37087

9 g stick 19 g stick

¼" to ¾" (6 mm to 20 mm)

diameter

Medium strength

10 min. (3 min. with primer) / 24 hrs. 110/43 -65°Fto300°F

(-54°Cto150˚C) NSF/ANSI 61, CFIA

quickstix® 268™

37685 37686PR

9 g stick 19 g stick

up to 1" (25 mm) diameter

High strength 20 min. (5 min. with primer) / 24 hrs. 220/4 -65°Fto300°F

(-54°Cto150°C) CFIA

loctite® product item package

size & type color Viscosity (cp) base on-part life dry time application agency approvals

7088™ quickstix® primer

1069258 17 g stick Teal Semisolid No solvent 30 days None Anaerobics N/A

7090™ primer, activator

19368 1fl.oz. bottle Light Amber 3 No solvent 1 hour <10 minutes Anaerobics N/A

7091™ primer, activator

18109 1 liter bottle Blue 1.03 Monomer 1 hour None Anaerobics N/A

7649™ primer n™ 213484.5oz.net

wt. aerosol can

Clear / Green 2 Acetone 30 days 30 to 70 seconds Anaerobics

MIL-S-22473E for existing designs, ASTM D-5363 for new designs,

NSF/ANSI 61, NSF P1, CFIA

Loctite® Anaerobic Machinery Adhesives cure in the absence of air and presence of metal ions. When assembling inactive metal parts, which are low in metal ions, the use of Loctite® primers is recommended to ensure proper performance of Loctite® Anaerobic Machinery Adhesives.

When should i use a loctite® priMer? speed up cure – Significantly speed up the cure time of Loctite® threadlockers when assembling metal parts that are cold, have large gaps or deep threads.

inactive metal assemblies* – When assembling metal parts with inactive surfaces, Loctite® primers are recommended to ensure proper performance of Loctite® threadlockers.

please note: Loctite® Anaerobic Machinery Adhesives cure in the absence of air and presence of metal ions. When assembling inactive metal parts, which are low in metal ions, the use of Loctite® Primers are recommended to ensure proper performance of Loctite® Anaerobic Machinery Adhesives.

inactiVe Metals* (priMers recoMMended)

actiVe Metals (priMers optional)

plated parts

anodized aluminum (alodine, irridite)

titanium

stainless steel

galvanized steel

Magnetite steel

inconel™

silver

gold

zinc

pure aluminum

cadmium

Magnesium

natural or chemical black oxide

ironplain steelcopperbrassbronzenickelManganeseMonel™

kovar™

Tech

thread sealingseaLing Threaded componenTs

• Replacetapesandpastes

• Liquidsensurecompletecontact between threads for a 100% seal

• Liquidswillnotcreep,shrink,shred or block systems (including filters)

• Disassemblycanbeachieved easily with basic hand tools

7

loctite® 536™ loW breakloose pst®

pipe seaLanTA high performance, paste-like anaerobic compound, ideal for instant seals of tapered threads. Designed to provide a low breakaway torque for ease of disassembly ev en when threads are exposed to heat. Cures when confined between close-fitting metal surfaces. Temperaturerange:upto350°F(177°C).typical use: Industrial applications in

chemical processing plants.item container size pack38363 (Cat # 5P-3413) 50 ml tube 10

loctite® 545™ thread sealant hydrauLic/pneumaTic fiTTingsContains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens. Suitable for fittings up to 2" (50 mm) in diameter. Excellent solvent resistance.typical use: Hydraulic line fittings, Brake

fittings, Transmission fluid fittings, PTO fittings.

item container size pack54531 50 ml bottle 10

Tech see pages 36-37 for thread sealing tech tips.


loctite® thread seal tape conTroLLed sTrengThTape (½" x 520") with plastic spool and shell. Can be used in applications withtemperaturesupto500°F.Oxygenservice compatible.typical use: General purpose oxygen

service compatible.item container size pack39904 ½" x 520" 144 x 0.003"

Loctite® 7649™ Primer N™

A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.item container size pack21348 (Cat # 169-5464) 4.5oz.netwt. 10 aerosol

loctite® quickstix® 561™ pst®

pipe seaLanT wiTh pTfeSemisolid stick form is convenient, portable and less messy. Formulated for fast, reliable curing on metal, tapered pipe threads and fittings. Loctite® QuickStix® 561™ PST® Pipe Sealant provides high pressure sealing and withstands continuous operating temperatures of -65°Fto300°F(-54°Cto150°C).typical use: General purpose, Overhead

applications.item container size pack37127 19 g stick 5

loctite® 592™ pst® thread sealant conTroLLed sTrengThLocks and seals threaded fittings. Parts may be repositioned up to 24 hours after application.typical use: Medium strength.item container size pack59231 50 ml tube 10

loctite®

product item

numberpackage size

& typecolor &

appearanceViscosity

(cp)temperature

range

pressure resistance

(psi)

recommended primer agency approvals

536™ low breakloose pst® 38363 50 ml tube White Paste 540,000 to

1,100,000Up to 351°F

(177°C) 10,000 N™ or T™ N/A

545™ 54531 50 ml bottle Purple 14,000 -65°F to 300°F (-54°C to 150°C) 10,000 7088™ N™ or T™ Agriculture Canada, ABS

592™ pst® 59231 50 ml tube White 350,000 -65°F to 400°F (-54°C to 204°C) 10,000 NF™ CFIA

7649™ primer n™ 21348 1.75 fl. oz. glass bottle 4.5 oz. net wt. aerosol 2

Optional for use with: Active surfaces (Brass, Copper, Bronze,

Iron, Soft Steel, Nickel)

Required for use with: InActive surfaces

(Aluminum, Stainless Steel, Magnesium, Zinc, Black

Oxide, Cadmium, Titanium and others)

MIL-S-22473EA for existing designs, ASTM D-5363 for new designs, NSF/ANSI 61,

NSF P1, CFIA

quickstix® 561™ pst® 37127 19 g stick White Paste Semisolid

paste-65°F to 300°F

(-54°C to 150°C) 10,000 N™ or T™

UL® Classified for U.S. ULC® Classified for Canada, CSA™ International, NSF/ANSI 61, CFIA

thread seal tape with ptFe

39904 ½" x 520" x 0.003" White Tape N/A Up to 500°F

(260°C)Pressure rating

for pipe N/A Conforms to MIL-T-27730

retainingsecuring cyLindricaL assembLies

• Bondnon-threadedcylindrical metal assemblies

• Highandmoderatestrength products – can carry high loads and eliminate fretting

• Fillallvoids–preventcorrosion

• Reducetheneedfor close tolerances

• 100%contact–loadandstressare distributed evenly over the joint

9

loctite® 540™ retaining coMpound cup/core pLug seaLanTA thixotropic anaerobic sealant designed for sealing core plugs and many other high strength sealing applications where non-migration is desired.typical use: Sealing core plugs.item container size pack54041 250 ml tube 10

loctite® 609™ retaining coMpoundpress fiT/generaL purposeRecommended for parts that will need subsequent disman tling, i.e., retention of bearings onto shafts and into housings. Mil-Spec (R-46082B) Type I.typical use: First generation to augment

press fits.item container size pack60921 (Cat # 4C-4032) 10 ml bottle 1060931 (Cat # 7M-7456) 50 ml bottle 10

loctite® 620™ retaining coMpoundsLip fiT/high TemperaTureRecommended for high temperature retaining of parts with a clearance or interference fit, i.e., retaining bushes, bearings, seals, fans and liners. Requires heat cure to achieve temperature resistance. ABS Approved.typical use: For high temperature

applications.item container size pack62015 (Cat # 4C-9506) 10 ml bottle 1062040 (Cat # 4C-9507) 50 ml bottle 10

loctite® 638™ retaining coMpoundsLip fiT/maximum sTrengThA maximum strength retaining compound for use where high dynamic force or cyclic loading is expected. Locks cylindrical assemblies up to 0.010" (0.254 mm) diametral clearance. Fixtures in 5 minutes.typical use: For high strength applications.item container size pack21448 50 ml bottle 10

loctite® 640™ retaining coMpoundsLip fiT/maximum sTrengThHigh temperature anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3,000 psi holding power. Restores fit to worn or out-of-tolerance assemblies. Preventssurfacecorrosion.Worksto400°F(204°C).typical use: For high strength applications. item container size pack64031 50 ml bottle 1064041 250 ml bottle 10

Tech

see page 37


loctite® quickstix® 668™ retaining coMpoundgeneraL purposeA high temperature retaining compound in a revolutionary semisolid formula. Patented, no-mess package offers added convenience and portability. Ideal for gaps up to 0.005" (0.127 mm) on the diameter. Withstands temperaturesto400°F(204°C).typical use: General purpose,

High temperature. item container size pack39148 19 g stick 5

Loctite® 648™ retaiNiNg comPouNdpress fiT/high sTrengTh/ rapid cureA retaining compound recommended for continuousworkingtemperaturesupto300°F(150°C).Fillsgapsupto0.006" (0.152 mm) diametral clearance. Fixtures in 5 minutes.typical use: Fast fixturing for close fitting

parts. High strength for stainless steel.

item container size pack21444 50 ml bottle 10

loctite® 660™ quick Metal® retaining coMpoundpress fiT repairA creamy, non-running gel that is applied onto cylindrical parts to fill surface imperfections and repair worn areas. It contains no metal, but once assembled, it hardens to a strength that often doubles that of a press fit. Use to 300°F(150°C).typical use: Salvage worn metallic parts. item container size pack66040 (Cat # 269-1943) 50 ml tube 10

loctite®

product item

numberpackage size

& type

Max. gap Fill

(diameter)

Viscosity (cp)

temperature range cure speed recommended

primerspecific gravity agency approvals

540™ 54041 250 ml tube N/A 7,000-12,000 -65°F to 300°F N/A N™ or T™ N/A N/A

609™ 60921 60931

10 ml bottle 50 ml bottle 0.005" 125 -65°F to 300°F

(-54°C to 150°C)Fixture – 10 min.

Full – 24 hrs. N™ or T™ 1.10

MIL-R-46082B for existing designs,

ASTM D-5363 for new designs, CFIA

620™ 62015 62040

10 ml bottle 50 ml bottle 0.015" 8,500 -65°F to 450°F

(-54°C to 232°C)Fixture – 30 min.

Full – 24 hrs. N™ or T™ 1.16 CFIA, ABS

638™ 21448 50 ml bottle 0.015" 2,500 -65°F to 300°F (-54°C to 150°C)

Fixture – 5 min. Full – 24 hrs.

7088™, N™ or T™ 1.09 CFIA

640™ 6403134041

50 ml bottle250 ml bottle 0.007" 600 -65°F to 400°F

(-54ºC to 204ºC)Fixture – 30 min.

Full – 24 hrs.7088™,

N™ or T™ 1.2MIL-R-46082B for existing designs, ASTM D-5363

648™ 21444 50 ml bottle 0.006" 500 -65°F to 300°F (-54°C to 150°C)

Fixture – 5 min. Full – 24 hrs.

7088™, N™ or T™ 1.13 N/A

660™ quick Metal® 66040 50 ml tube 0.020"

250,000/ 1,500,000 Thixotropic

-65°F to 300°F (-54°C to 150°C)

Fixture – 20 min. Full – 24 hrs. N™ or T™ 1.13 CFIA

7649™ primer n™

19269 21348

1.75 fl. oz. glass bottle 4.5 oz. net wt. aerosol 2

oPtioNaL for use with: Active surfAces

(Brass, Copper, Bronze, Iron, Soft Steel, Nickel)

required for use with: inActive surfAces

(Aluminum, Stainless Steel, Magnesium, Zinc, Black Oxide, Cadmium, Titanium and others)

MIL-S-46163A for existing designs, ASTM

D-5363 for new designs, NSF/ANSI 61, NSF P1, CFIA

quickstix® 668™ 39148 19 g stick 0.005" Semisolid -65°F to 400°F (-54°C to 204°C)

Fixture – 30 min.

Full – 24 hrs.N™ or T™ 1.1228 N/A

Tech

see page 38

gasketingseaLing of fLanges

• Provideprecise,reliablesealing

• Noshimmingeffect–controlled tolerances, no need for re-torquing

• Fillallvoids–reducetheneedfora fine surface finish of flanges

• Partscanbedisassembledeasily even after extended service

• Resisthighpressurewhen fully cured

11

loctite® quickstix® 534™ hi-tackgaskeT dressingNo mess, semisolid formula offers added control and ease of use. Patented package is portable and won’t leak or spill. Seals and holds the heaviest gaskets in place during assembly. Solvent-free and low odor.Suitableto300°F(150°C).typical use: Vertical and repositionable

applications.item container size pack39156 19 g stick 5

loctite® 5699™ grey, high perForMance rtV silicone gaskeT makerDesigned for high torque applications. Exceeds manufacturers’ performance requirements. Remains flexible and withstands high vibration. Low odor. Noncorrosive. Outstanding oil resistance. Temperaturerange:-75°Fto625°F(-59°C to329°C)intermittent;resistsautoand shop fluids.typical use: Rigid flange sealing of

transmissions and cast metal housings.

item container size pack40505 190 ml can 6

loctite® 587™ blue, high perForMance rtV siliconegaskeT makerRecommended for sealing all types of flanges including stamped sheet metal. Designed for superior bonding properties to oil contaminated metals. ABS Approved.typical use: Typical automotive

gasketing applications.item container size pack40462 (Cat # 141-5831) 190 ml can 658730 70 ml tube 1258775 300 ml cartridge 10

loctite® quickstix® 548™ gasket eliMinator® Flange sealantPatented semisolid formula is ideal for on-the-spot repairs, or when a conventional gasket is out of stock. Can be applied quickly and neatly on a variety of metal surfaces, including aluminum, to form a flexible, solvent resistant seal. Seals to300°F(150°C)andfillsgapsto0.010" (0.254 mm).typical use: Vertical applications,

Cast metal housings.item container size pack39152 19 g stick 5

Tech

see page 38

Tech

see page 39

Tech

see page 39


loctite® 518™ gasket eliMinator® Flange sealantForms a flexible, solvent-resistant seal that willnottearordecay.Sealsto300˚F(149˚C)and and fills gaps to 0.050" (1.27 mm). Can be used on flexible metal assemblies, including aluminum surfaces. Easy disassembly and cleaning.typical use: Ideal for on-the-spot and

emergency repairs, or when a conventional gasket is out of stock.

item container size pack51831 50 ml tube 1

Loctite® gasket seaLaNt 1Reliable, paste-like gasket sealant/dressing/coating. Dries quickly to a hard set. Recommended for rigid, permanent assemblies.Temperaturerange:-65°Fto400°F(-54°Cto204°C);resistscommonshopfluids and fuels.typical use: Threaded connections, Air

ducts, Plumbing connections.item container size pack30511 (Cat # 4C-9501) 3oz.tube 12

Loctite® gasket seaLaNt 2Reliable, paste-like gasket sealant/dressing/coating. Sets more slowly to a pliable film. Best suited for non-rigid, vibrating assemblies. Allows for easy disassembly if required.Temperaturerange:-65°Fto400°F(-54°Cto204°C);resistscommonshopfluidsand fuels.typical use: Valve cover and oil pan

gaskets, Threaded connections.item container size pack30514 (Cat # 4C-9502) 3oz.tube 12

loctite® high teMp Flange sealantImproves flange-sealing reliability by overcoming the shortcomings of pre-cure gaskets and other gasket products. After curing between mating metal flanges and filling surface imperfections, it provides a tough, resilient, solvent- and temperature-resistant seal that flexes with flange movements caused by vibration, pressurizationorthermalchanges.typical use: Flexible applications.item container size pack38364 (Cat # 6V-6640) 50 ml tube 10

loctite® 598™ black, high perForMance rtV siliconegaskeT makerFast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties. Temperaturerange:-75°Fto625°F(-59°Cto329°C)intermittent;resistsautoand shop fluids and vibration.typical use: Oil pans, Valve covers,

Timing gear covers.item container size pack59830 70 ml tube 12

loctite® 5127™ Flexible anaerobic gasket Flange sealantA single component, ready-to-use, gel-like material that cures at room temperature. After curing between mating metal flanges and filling surface imperfections, it provides a tough, resilient, solvent- and temperature-resistant seal that flexes with flange movements caused by vibration, pressurizationorthermalchanges.typical use: Flexible applications.item container size pack17430 (Cat # 4C-5300) 300 ml cartridge 10

loctite® 5900® Flange sealantSuperior flexibility and adhesion. Provides instant seal. Excellent fluid resistance, noncorrosive, low odor, low volatility. Black in color.typical use: High adhesion, Instant seal.item container size pack20166 (Cat # 165-2601) 300 ml cartridge 10

Loctite® 510™ gasket eLimiNator® fLaNge seaLaNtProductwithstandstemperaturesto400˚F(204˚C)andhasexcellentsolventandchemical resistance. Fills gaps up to 0.010” (0.254 mm) and maintains clamping loads for strong, leakproof assemblies. Makes or dresses gaskets in rigid assemblies. Eliminates gasket compression set.typical use: General gasketing, needing

high temperature resistance.item container size pack51031 50 ml tube 1

loctite® 515™ gasket eliMinator® Flange sealantMakes flexible gaskets for rigid machined flanges with less than 0.050" (1.27 mm) gap. Flexes when flanges move in service.typical use: General gasketing, ideal for

flanges that move in service.item container size pack51531 50 ml tube 1

gasketingseaLing of fLanges

loctite® aViation gasket sealantSlow-drying, non-hardening brush-top sealant approved for use in aviation as well as automotive applications. Temperature range:-65°Fto400°F(-54°Cto204°C);resistsgasoline, oil and grease.typical use: Close tolerances, Slow cure.item container size pack30517 (Cat # 4C-9505) 0.25 pt. brush-top 12 can 1522029 1 pt. brush-top 12 can

loctite® superFlex® red high teMp rtV silicone adhesiVe sealantMakes gaskets that resist temperatures to 600°F(315°C)intermittent.Resistsaging,weather, and thermal cycling without shrinking, cracking or hardening. Fills gaps to 0.25" (6.35 mm).typical use: Automotive gasketing

applications.item container size pack59630 (Cat # 4C-9614) 80 ml tube 1259675 (Cat # 8T-9013) 300 ml cartridge 1040465 190 ml power can 6

loctite® high Flex ForM-in-place gasketFlexible form-in-place gasket provides high temperature resistance and more flexibility. Fills gaps to 0.020" (0.5 mm) and cures to a tough solvent-resistant gasket that flexes with flange movement caused by vibration, pressurizationorthermalchange.Operatingtemperaturelimitsof-63°Fto350°F (-54°Cto177°C).typical use: PTO housing cover to housing,

Brake separator plates to brake piston housing, Transmission to range box, Range box to differential case, Centerline bracket to differential case, Axle housing to ring gear to differential case.

item container size pack38657 (Cat # 1U-8846) 50 ml tube 6

loctite® hi-tack gasket sealantRed-colored, liquid sealant that holds gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky film. Suitableto500°F(260°C).Containsnoozone-depleting chemicals.typical use: Improved heat transfer,

Repositionable.item container size pack1540591 (Cat # 138-8436) 1 pint brush-top 12 (formerly 30525) can30524 0.25 pt. brush-top 12 can 30526 9oz.aerosol 1213

White: 59430 (Cat # 8T-0065) 80 ml tube 12clear: 59530 80 ml tube 1259575 (Cat # 119-0781) 300 ml cartridge 10blue: 30533 (Cat # 8T-9022) 300 ml cartridge 10

loctite® 5999™ Flange sealantFor rigid flange assemblies. Provides instant seal. Excellent fluid resistance. noncorrrosive, low odor, low volatility. Grey in color.typical use: Oil, water resistant, Instant seal.item container size pack21744 300 ml cartridge 10

loctite® superFlex® rtV silicone adhesiVe sealantGeneral purpose, one-part silicone adhesive sealant cures at room temperature to form a tough rubber seal. Will not slump in overhead or vertical applications. Formulated to withstand extreme temperature cycling, UV light and ozone.Cannotbepainted.Availableinclearnoncorrosive, black, white and clear.typical use: General purpose.item container size packclear noncorrosive: 51388 (Cat # 8T-9014) 300 ml cartridge 10black: 59330 (Cat # 3S-6252) 80 ml tube 1240464 (Cat # 141-5830) 190 ml can 10 solutions guide for cat dealers 14

loctite®

product item

number package size & type color temperature range

oilresistance

Fixture/ cure time agency approvals

5127™ 38657 17430

50 ml tube 300 ml tube Blue -65°F to 300°F

(-54°C to 150°C) Excellent Primed – 1 to 24 hrs. Unprimed – 4 to 24 hrs. N/A

5900® 20166 300 ml cartridge Black -65°F to 500°F (-54°C to 260°C)

Oil/water resistant

Tack Free – 20 min. Full Strength – 24 hrs. CFIA, NSF P1

5999™ 21744 300 ml cartridge Grey -75°F to 625°F (-59°C to 329°C)

Oil/water resistant,

instant seal

Tack Free – 10 min. Full Strength – 24 hrs. N/A

510™ 51031 50 ml tube Red -65°F to 400°F (-54˚C to 204˚C) Oil resistant Unprimed – 4 to 24 hours

Primed – 30 minutes to 4 hours N/A

515™ 51531 50 ml tube Purple -65°F to 300°F (-54°C to 150°C) Oil resistant Unprimed – 1 to 12 hours

Primed – 15 minutes to 2 hours UL® Classified for U.S.

518™ 51831 50 ml tube Red -65°F to 300°F (-54°C to 150°C) Oil resistant Unprimed – 4 to 24 hours

Primed – 30 minutes to 4 hours NSF®/ANSI 61, CFIA

aviation gasket sealant

30517 4 oz. brush-top can Dark Reddish-Brown

-65°F to 400°F (-54°C to 204°C) Oil resistant Full Strength – 12 hrs. N/A

gasket sealant 1 30511 3 oz. tube Reddish-Brown -65°F to 400°F (-54°C to 204°C) Oil resistant Full Strength – 24 hrs. CFIA

gasket sealant 2 30514 3 oz. tube Black -65°F to 400°F (-54°C to 204°C) Oil resistant Remains Tacky N/A

hi-tack gasket sealant

1540591 1 pint brush-top can Red -65°F to 500°F (-54°C to 260°C)

Increased oil resistance Sets in 5 min. N/A

high temperature Flange sealant

38364 50 ml tube Blue -65°F to 350°F (-54°C to 149°C) Oil resistant Full Strength – 24 hrs. N/A

quickstix® 534™ hi-tack

gasket dressing39156 19 g stick Purple -65°F to 300°F

(-54°C to 150°C) Excellent Sets in 5 min. N/A

quickstix® 548™ gasket eliminator® 39152 19 g stick Orange -65°F to 300°F

(-54°C to 150°C) Excellent Less than 3 hrs. with or without a primer CFIA

rtV 587™ blue silicone

40462 190 ml can Blue -75°F to 500°F (-59°C to 260°C) Excellent Tack Free – 30 min.

Full Strength – 24 hrs.

American Bureau of Shipping, UL® Classified for U.S., CFIA, NSF P1

rtV 598™ black silicone

59830 70 ml tube Black -75°F to 625°F (-59°C to 329°C)

Excellent oil resistance

Tack Free – 30 min. Full Strength – 24 hrs.

American Bureau of Shipping, CFIA

rtV 5699™ grey silicone

40505 190 ml can Grey -75°F to 625°F (-59°C to 329°C)

Increased oil resistance

Tack Free – 30 min. Full Strength – 24 hrs. CFIA

superflex® blue rtV

30533 300 ml cartridge Blue -65°F to 500°F (-54°C to 260°C) N/A Tack Free – 30 min.

Full Strength – 24 hrs. N/A

superflex® red high temp rtV

59630 59675

80 ml tube 300 ml cartridge Red -75°F to 600°F

(-59°C to 316°C) N/A Tack Free – 30 min. Full Strength – 24 hrs. CFIA

superflex® rtV

59330 40464

80 ml tube 190 ml can Black

-65°F to 450°F (-54°C to 232°C) N/A Tack Free – 30 min.

Full Strength – 24 hrs.UL® Listed for U.S., NSF/ANSI 51, CFIA

59530 59575

80 ml tube 300 ml cartridge Clear

59430 80 ml tube White

51388 300 ml cartridge Clear Non-Corrosive

30533 300 ml cartridge Blue

lubricantsgreases

• Protectmetalpartsfromcorrosion, gallingandseizing

• Temperatureresistance

• Thermalstability

• Penetrateandfree corroded assemblies

15

loctite® Viperlube® high perForMance synthetic greaseNLGI Grade 2/Severe Duty GC-LB Grease provides protection against equipment exposed to a wide range of temperatures. Use as a lubricant and protective anti-rust film on bearings and machine parts, or as a release agent on gaskets and seals. NSF H1 rated for incidental food contact.typical use: Equipment, Gears, Bearings

and Cables.item container size pack36781 3oz.tube 1236782 14oz.cartridge 1236786 10.1oz.netwt. 12 aerosol36783 400 g cartridge 12

loctite® dielectric greaseProvides a moisture-proof barrier that lubricates and protects electrical equipment from salt, dirt and corrosion. High dielectric strength. Good thermal, oxidation and chemical stability.typical use: Electrical equipment.item container size pack37535 3oz.tube 6


loctite® Freeze & releaseInstantlychillsseizedandrustedparts(bolts,nuts,studs)downto-45°F(-43°C).Theexceptionalshock-freezeactioncausesmicroscopic cracks in the layer of rust, allowing the lubricating ingredient to wick directly into the rust by capillary action.typical use: Removing rusty nuts, bolts

and assemblies.item container size pack996456 13.52oz.netwt. 12 aerosol

Loctite® Moly dry FilM lubricantSolid film lubricant for sliding surfaces and slow moving parts. Temperature resistant upto750°F(400°C)asadryfilmlubricant,2400°F(1315°C)asananti-seize.Won’tsqueezeout,burnoff,orpickupdirt.typical use: Heavy-duty lubricant for plant

and machine maintenance.item container size pack39895 (Cat # 242-6990) 12oz.aerosol 12 can

Loctite® gear, chain and cable lubricantProtects and prolongs the life of gears, chains, wire rope, and cable. Repels dirt, sand, and dust with minimal “throw-off ” fromcentrifugalforce.Containsnoozone-depleting compounds.typical use: Lubricant for any chain-driven

tool or vehicle.item container size pack81251 (Cat # 222-3110) 12oz.aerosol 12 can

loctite® silicone lubricantMultipurpose lubricant stops sticking, friction, squeaking and binding of moving parts. Non-gumming. Will not mar paint, rubber or plastic surfaces. Waterproofs and electrically insulates. CFIA approved.typical use: Chain-driven equipment.item container size pack51360 5.3oz.tube 12

Loctite® solVo-rust® super penetrating oilFrees rusted parts and keeps them lubricated and protected from rust after use. May be applied on or near moving parts. Will not harm painted surfaces. Containsnoozone-depletingcompounds.CFIA approved.typical use:Breakthebondofoxidized

metal and release rusted or frozenparts.

item container size pack81252 (Cat # 222-3115) 12.25oz.aerosol 12 can

Loctite® penetrating oilHeavy-duty penetrant for rusted and frozenassemblies.Worksquicklytopenetrate and loosen rust, tar, grease, dirt, carbon deposits and corrosion from metal parts.Freesfrozennuts,boltsandfittingsin all types of assemblies.typical use: Lubricates to free any

corrodedorseizedpart.Penetrates rust, scale, paint, varnish, carbon or gum.

item container size pack51221 (Cat # 222-3123) 12oz.aerosol 12 can

anti-seizelubricants• Protectagainstrust,corrosion, seizingandgalling

• Providelubricationin extreme environments

17

loctite® c5-a® copper anti-seize lubricantExclusive formula suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling andseizingattemperaturesto1800°F(982°C).CFIAApproved.typical use: Electrically conductive,

Aluminum/soft metals, Stainless steel.

item container size pack51001 1oz.tube 4851144 (Cat # 4C-5598) 4oz.brush-top can 1251147 (Cat # 4C-5599) 8oz.brush-top can 1251003 (Cat # 222-3114) 12oz.netwt. 12 aerosol 51007 1 lb. brush-top can 1251008 (Cat # 5P-3931) 2.5 lb. can 1251009 8 lb. can 239643 1 lb. brush-top 12 metal can1615524 2.5 lb brush-top 12 can

loctite® quickstix® c5-a® copper anti-seize lubricantThe same trusted performance characteristics as the Loctite® C5-A® CopperAnti-Seizepasteinaconvenientsemisolid stick form. Stick package offers more portability and less mess.typical use: Electrically conductive,


item container size pack37229 20 g stick 10

loctite® Moly pastemeTaL-freeMetal-free, very low friction. Lubricates press fits, protects during break-in and underhighstaticloadsupto750°F(400°C).Allowsmaximumclampingfromavailable torque.typical use: Metal free formulation

for stainless steel.item container size pack51049 1 lb. brush-top can 12


loctite® graphite 50™ anti-seizeMetal-free, electrically conductive, nonmetallic. Temperature resistant up to 900°F(482°C).Highlyelectricallyconductivein metal-to-metal joints.typical use: Electrically conductive,

Metal-free.item container size pack51084 1 lb. can 12 (Cat # 4C-5592, 4C-5593 & 6V-4876)

1613186 1 lb. brush-top 12 canloctite® quickstix® silVer

grade anti-seizeNew semisolid stick offers the same performance characteristics as Loctite® SilverGradeAnti-Seizepasteinaconvenient semisolid stick form. Stick package offers more portability and less mess.typical use: Electrically conductive,


item container size pack37230 20 g stick 10

loctite® nickel anti-seizeCopper-free. Recommended for stainless steel and other metal fittings. Forpreventingcorrosion,seizingandgalling in harsh, chemical environments, andtemperaturesto2400°F(1315°C).ABS Approved.typical use: Extreme high temperature

and chemical resistance for stainless steel.

item container size pack77164 (Cat # 337-7965) 1 lb. brush-top can 10

loctite®

product item

number package size & type temperature resistance k Value color typical applications agency approvals

c5-a® copper anti-seize lubricant

51001 51144 51147 51003 51007 51008 51009 39643

1615524

1 oz. tube 4 oz. brush-top can 8 oz. brush-top can

12 oz. net wt. aerosol 1 lb. brush-top can

2.5 lb. can 8 lb. can

1 lb. brush-top metal can 2.5 lb. brush-top metal can

1800°F (982°C) 0.16 Copper General Purpose N/A

graphite 50™ anti-seize

51084 1613186

1 lb. can 1 lb. brush-top can

900°F (482°C) 0.13 Black Specialty N/A

Moly paste – Metal-Free

51049 1 lb. brush-top can 750°F (400°C) 0.11 Black Metal-Free Stainless Steel N/A

nickel anti-seize

77164 1 lb. brush-top can 2400°F (1315°C) 0.13 Silver General Purpose ABS

quickstix® c5-a® copper anti-seize

37229 20 g stick 1800°F (982°C) 0.16 Copper General Purpose CFIA

quickstix® silver grade anti-seize

37230 20 g stick 1600°F (871°C) 0.18 Silver General Purpose ABS, CFIA

cleaners, degreasers & rust treatMent• Cleananddegreasework surfaces and parts

• Corrosionprotection

19

loctite® cloVer® silicon carbide grease Mix grade g-80 griTThe standard abrasive paste for fast metal removal. Produces a smooth, flat surface but not a polished one. Leaves a rust-preventing film on lapped surfaces.typical use: Lapping compound.item container size pack39473 (Cat # 226-6624) 1 lb. can 6

loctite® nonFlaMMable electrical contact cleanerRemoves grease, oil and other contaminates from electrical parts to prevent contact failure. Dries residue- free in seconds. Contains no HCFCs or CFCs.typical use:Cleansmotorized

instruments.item container size pack1174633 15oz.netwt. 12 (Cat # 222-3124) aerosol

Mc-Free chisel® gasket cleanerFree of Methylene Chloride has a foaming action that lifts off gaskets from any type of assembly in minutes. Performs better than Methylene Chloride formulations on silicone gaskets and removes most spray paints from steel panels in less than 30 seconds. Convenient spray liquid penetrates and cleans intricate shapes and will not run off, even on vertical surfaces. typical use: Removes pre-cut

conventional gasket cements as well as formed-in-place chemical gaskets. Suitable for wood and plaster. Not for use on plastics, linoleum or synthetic fibers.

item container size pack1317781 15.25oz.netwt. 12 aerosol

Tech

see page 39


loctite® Maxi-coat™ rust inhibitorHeavy-duty coating provides long-term protection for metal parts, equipment and machinery. Forms a protective, waxy film that seals out moisture, air, acid and other corrosive elements. Great for protecting parts in storage. Removable with Loctite® Electrical Contact Cleaner.typical use: Non-splattering chain lube,

acting as a rust inhibitor for machinery.

item container size pack51211 (Cat # 222-3121) 12oz.aerosol 12 can

loctite® extend® rust treatMentConverts existing rust (rust required) into a stable base. Cured product acts as a primer ready for painting with oil- or solvent-based paint. Protects surface from corrosion.typical use: Metal pipes, Valves, Fittings,

Outside surfaces of storage tanks, Fences, Guardrails, Wrought iron furniture, Conveyors, and Construction and agricultural equipment.

item container size pack30539 10.25 net wt. 12 aerosol75430 1 quart bottle 1075448 1 gallon bottle 475465 5 gallon pail 1

loctite® non-chlorinated parts cleanerPenetrates, dissolves, and removes dirt and oil from metal parts. Leaves no residue. Does not contain 1,1,1-trichlorethane;helpsmanage EPA halide limits.typical use: Removes dirt and oil from

metalparts;helpsmanageEPA halide limits.

item container size pack30545 14.75oz.aerosol 12 (Cat # 222-3117 & 222-3118) can

loctite® chisel® gasket reMoVerRemoves gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Not for use on plastics, linoleum or synthetic fibers. CFIA approved.typical use: Removes pre-cut

conventional gasket cements as well as formed-in-place chemical gaskets. Suitable for wood and plaster. Not for use on plastics, linoleum or synthetic fibers.

item container size pack79040 18oz.netwt. 10 aerosol

bonding & repairassembLing separaTe parTs

• Bondavarietyofsubstrates

• Assemblepartsquicklyandeasily

• Repairbrokenparts

• Bonddissimilarparts

loctite® general epoxy (Mixer cups)Premeasured epoxy mixer cups. Suitable for bonding metals, glass, ceramics, most plastics, wood and stone. It will also fill porosities and voids and may be used to build up surfaces that have been worn. When fully cured, it may be machined or sanded. note: Not recommened for polyethylene and polyproylene.typical use: Production, maintenance and

prototype bonding of metals, ceramics, concrete, wood, glass and most plastics.

item container size pack21427 (Cat # 266-3144) 10–0.12fl.oz. 10 cups

loctite® FixMaster® Fast cure epoxy (Mixer cups) Premeasured epoxy mixer cups. Bonds in 5 to 15 minutes. Excellent chemical resistance. Fills porosities and can be used to build up worn parts. Ideal for bonding glass, hard plastics, rubber and metal.typical use: Gap filling, sandable finish.item container size pack21425 10–0.12fl.oz. 10 cups 21426 10–1oz.cups 139088 4–1oz.cups 6

loctite® FixMaster® superior MetalNon-rusting, ferro-silicone-filled epoxy. Extremely high compressive strength and wear resistance. Ideal for rebuilding worn surfaces exposed to harsh environments. Can be machined, drilled and tapped in 6 to 8 hours. For final finish cuts, let the product cure for 24 hours and use carbide tooling. Spreadable putty. Sets in 20 minutes.typical use: Rebuilding, Corrosion

protection, Repairing theaded parts, Pump repair.

item container size pack97473 (Cat # 1U-6136) 1 lb. kit 6

loctite® FixMaster® Metal Magic steel™

Steel epoxy in stick form. Cut off a section, knead, and apply to leaking pipes or damaged equipment. Cures in 10 minutes. NSF 61 approved for potable water applications.typical use: Emergency metal repair.item container size pack98853 4oz.stick 24(Cat # 8T-9018 & 8T-9019)

21

Tech see page 41 for bonding & repair tech tips.

loctite® black contact adhesiVeA professional, solvent-based adhesive with neoprene that blends in with black-colored fabrics, rubbers, weather-stripping and other porous materials. Withstands temperature extremes and is resistant to gasoline, kerosene and other solvents. Fast drying and waterproof. Allows repositioning of the parts after initial contact.typical use: Weather-stripping, Vinyl, Rubber,

Wood and Metal.item container size pack30540 (Cat # 5H-2471) 5fl.oz.tube 12

loctite® MaxiMuM strength headliner adhesiVeA high strength, aerosol product designed for bonding foam, carpet, fabrics, plastics, rubber, etc. Loctite® Maximum Strength Headliner Adhesive is resistant to extreme seasonal temperatures, is water resistant and sprays on clear.typical use: Foam, Carpet, Fabrics, Plastics

and Rubber.item container size pack37312 16.75oz.netwt 6 aerosol

loctite® 330™ depend® adhesiVeLoctite® 330™ Depend® Adhesive sets in just minutes to a tough acrylic adhesive with high peel and impact strength. No-mix kits include activatorandadhesive.Storeat36°Fto46°F.typical use: Bonding almost all combinations of

materials, including glass.item container size pack20251 (Cat # 308-3506) 25 ml kit 520252 250 ml kit 5

loctite® 332™ structural adhesiVeAn activator-cured, no-mix adhesive that provides high temperature capability with thermaldurabilityupto400°F(204C).UsewithLoctite® 7387™ Depend®Activator.Storeat36°Fto46°F.typical use: High temperature, no-mix

structural adhesive.item container size pack33201 25 ml syringe 10

loctite® FixMaster® Flex 80™ puttyA trowelable, two-part urethane for rebuilding and repairing rubber parts and linings, providing impact-, abrasion-, and corrosion-resistant protection.typical use: Belt repair, Rebuilding

and repairing rubber parts and linings.

item container size pack97423 (Cat # 144-7779) 1 lb. kit 6

loctite® FixMaster® Wear resistant puttyCeramic fibers give this trowelable putty excellent wear- and abrasion-resistant properties. Cures to a smooth, low friction surface. For surfaces exposed to wear, erosion and cavitation.typical use: Gap filling. Wear-resistant

formulation.item container size pack98743 (Cat # 1U-6132) 3 lb. kit 6

loctite® FixMaster® Fast set steel puttyFaster setting version of Loctite® Fixmaster® Steel Putty. Sets in 3 minutes.typical use: Repairing pipes and tanks.item container size pack39917 (Cat # 1U-6140) 1 lb. kit 6

loctite® FixMaster® Magna-crete™

A two-component, rapid-setting concrete repair and grouting system. Chemically resistant to most common liquids and chemicals, and can be mixed and applied attemperaturesfrom-15°Fto130°F(-26°Cto54°C).Readyforserviceinonehour.Summer and Winter Additives are also available to aid cure times.typical use: General floor repair.item container size pack95551 1 gallon kit 195555 5 gallon kit 1

loctite® contact adhesiVeA fast drying, solvent-based adhesive with neoprene that bonds rubber, insulation, weather stripping and other porous materials. Sets to a tackfree surface in 3-4 minutes, and the early strength is enough to hold most parts together. Allows repositioning of the parts after initial contact.typical use: Yellow gel for bonding

rubber, insulation and weather stripping.

item container size pack30537 5fl.oz.tube- Yellow 1



loctite® h3000™ speedbonder™ structural adhesiVeA low viscosity adhesive ideal for bonding avarietyofsubstrates.Keepat40°Fforlonger shelf life.typical use: Steel, Aluminum,

Stainless steel.item container size pack83001 (Cat # 209-0987) 50 ml dual 10 cartridge also required For 50 Ml speedbonder™: 98473 Loctite® Luer/Stepped Nozzles98466 Loctite® Caulking Gun Conversion Kit

loctite® all purpose spray adhesiVeBonds lightweight, porous, and non-porous surfaces. Allows for repositionable andpermanentbonds.Fastdrying;won’t shrink or bleed. Resists water and humidity.Containsnoozone-depletingcompounds.typical use: Foam, Carpet, Fabrics,

Plastics and Rubber.item container size pack30544 (Cat # 222-3113) 10.5oz.netwt. 12 aerosol

loctite® 401™ prisM® instant adhesiVeDesigned for the assembly of difficult-to- bond materials that require uniform stress distribution. Particularly suited for bonding a wide range of materials, including metals, plastics and elastomers. Also formulated for faster cure speeds on dry or acidic surfaces and substrates.typical use: Wicking grade.item container size pack40104 3 g tube 10

loctite® 406™ prisM® instant adhesiVeDesigned for the bonding of plastics and electrometric materials where very fast fixturing is required.typical use: Wicking grade.item container size pack40604 3 g tube 10

23

loctite® 480™ prisM® instant adhesiVeLow viscosity, elastomer-modified instant adhesive. Bonds metals and rubbers. Excellent peel, impact and shear strength. NSF®/ANSI 61 certified for potable water.typical use: General filling.item container size pack48040 20 g bottle 1

loctite® 3034™ structural adhesiVeExtended open time allows for adjustment of parts. Excellent peel and shear strength on polyethylene plastics.typical use: Porous surfaces.item container size pack1051330 50 ml cartridge 1960973 490 ml dual 1 cartridge

loctite® 454™ prisM® instant adhesiVeThe ideal adhesive for porous substrates, Loctite® 454™ Prism® Instant Adhesive is a clear gel. As a surface insensitive cyanoacrylate, it is ideal for difficult-to-bond substrates, including rough, porous and acidic surfaces. Need to bond something on a vertical surface? This gel formulation won’t run off before you put substrates together. ABS Approved.typical use: Porous surfaces.item container size pack45404 3 g tube 10

loctite® 410™ prisM® toughA black toughened instant adhesive with gap filling capabilities.typical use: Gap filling. Bonding rubbers,

metals and plastics.item container size pack41045 20 g bottle 10

loctite® 411™ prisM® instant adhesiVeAn adhesive formulated for excellent impact and peel strength in gap-filling applications.typical use: Clear gap filling.item container size pack41104 3 g tube 10

loctite® 414™ super bonder®

Loctite 414™ Super Bonder® is a general purpose instant adhesive that works well for bonding plastic, rubber and metal.typical use: Plastic bonder.item container size pack41404 (Cat # 157-7228) 3 g tube 10

loctite® 426™ prisM® instant adhesiVeDesigned for porous surfaces and vertical or overhead applications with the added benefits provided by an elastomer-modified instant adhesive.typical use: Porous surfaces,

Vertical, Overhead.item container size pack21921 10 g syringe 10



Tech

see page 40

25

loctite® 495™ super bonder® instant adhesiVeDesigned to bond rubber, metal, and plastic parts with gaps to 0.004" (0.1016 mm).typical use: General purpose.item container size pack49550 1oz.bottle 10

loctite® 496™ super bonder®

Loctite 496™ Super Bonder® is a general purpose adhesive and is particularly suited for the bonding of metal substrates.typical use: Rubber bonder.item container size pack49650 1oz.bottle 10

loctite® 498™ super bonder® instant adhesiVeA medium viscosity, high temperature product for all metals, and most plastics and rubbers. Resists temperatures to 180°F(82°C)continuousorupto250°F(121°C)intermittent.typical use: Thermal cycling.item container size pack49850 1oz.bottle 10

loctite® 380™ black Max® instant adhesiVeFor parts that encounter shock, vibration or thermal cycling, Loctite® 380™ Black Max® Instant Adhesive is the instant adhesive choice. This black, toughened cyanoacrylate adhesive uses elastomers to withstand impact and challenging environmental conditions. Seals as well as bonds. Works especially well bonding rubber to metal.typical use: Close-fitting tools.item container size pack38004 (Cat # 152-9155) 3 g tube 10

loctite® quicktite® gelA general-purpose instant adhesive gel in a unique, virtually indestructible package that is perfect for pocket or toolbox storage. Its new self-piercing, no-clog tip allows for ease of use and dispense accuracy. In addition, spill-proof design keeps hands clean.typical use: General gel adhesive.item container size pack39202 0.14oz.bottle 10

loctite® product

item number

package size & type color temperature

resistance Fixture time* Full cure* agency approvals

330™ depend®20253 20251 20252

3 ml kit 1** 25 ml kit 2** 250 ml kit 3**

Pale Yellow -65°F to 225°F (-54°C to 107°C) 5 min. 24 hrs. CFIA

332™ 33201 25 ml syringe Amber Up to 400°F (204°C) 3 min. 24 hrs. N/A

380™ black Max® instant adhesive 38004 3 g tube Black -65°F to 225°F

(-54°C to 107°C) 90 sec. 24 hrs. CFIA

401™ prism® 40104 3 g tube Clear -65°F to 180°F (-54ºC to 82ºC) 15 sec. 24 hrs. CFIA

406™ prism® 40604 3 g tube Clear -65°F to 180°F (-54°C to 82°C) 15 sec. 24 hrs. Commercial item std.

A-A-3097

411™ prism® 41104 3 g tube Clear -65°F to 210°F (-54°C to 99°C) 30 sec. 24 hrs. N/A

414™ super bonder® 41404 3 g tube Clear -65°F to 180°F (-54°C to 82°C) 20 sec. 24 hrs. CFIA, Commercial item

std. A-A-3097

426™ prism® 21921 10 g syringe Black -65°F to 210°F (-54°C to 99°C) 20 sec. 24 hrs. N/A

454™ prism® 45404 3 g tube Clear -65°F to 180°F (54°C to 82°C) 15 to 90 sec. 24 hrs. ABS, CFIA

480™ prism® 48040 20 g bottle Black -65°F to 180°F (54°C to 82°C) 90 sec. 24 hrs. NSF® / ANSI 61

495™ super bonder® 49550 1 oz. bottle Clear -65°F to 180°F (-54°C to 82°C) 20 sec. 24 hrs. Commercial item std.

A-A-3097, ABS

496™ super bonder® 49650 1 oz. bottle Clear -65°F to 180°F (-54°C to 82°C) 30 sec. 24 hrs. Commercial item std.

A-A-3097

498™ superbonder® 49850 1 oz. bottle Clear -65°F to 180°F (-54°C to 82°C) 50 sec. 24 hrs. N/A

3034™ structural adhesive

1051330 960973

50 ml cartridge 490 ml dual cartridge Translucent Up to 350°F

(177°C) 75 min. 72 hrs. N/A

all purpose spray adhesive 30544 10.5 oz. net wt. aerosol Clear Drying, Semi-

translucent FoamUp to 120°F

(49ºC) 15 to 20 min.24 hrs. at ambient

temperatureN/A

black contact adhesive 30540 5 fl. oz. tube Black Gel Up to 180°F (82°C)

Let breath 2 to 3 min.; sets up in 5 to 15 min.

24 hrs. at ambient

temperatureCFIA

contact adhesive 30537 5 fl. oz. tube Yellow Gel Up to 180°F (82ºC)

Let breath 2 to 3 min.; sets up in 5 to 15 min.

24 hrs. at ambient

temperatureCFIA

Fixmaster® Fast cure epoxy (Mixer cups)†

21425 21426 39088

10 – 0.12 fl. oz. cups 10 – 1 oz. cups 4 – 1 oz. cups

Grey (upon curing)

Up to 180°F (82°C) 10 min. 12 hrs. CFIA

h3000™ speedbonder™ 83001 50 ml dual cartridge Cream N/A 15 min. 24 hrs. N/A

Maximum strength headliner adhesive 37312 16.75 oz. net wt. aerosol

Clear Drying, Semi-Translucent

Foam

Up to 170°F (76°C)

Let dry 15-to-20 min. before assembly. Spray both sides to be bonded for maximum strength.

24 hrs. at ambient

temperatureN/A

quicktite® gel 39202 0.14 oz. bottle Clear 65°F to 180°F (54°C to 82°C) 45 sec. 24 hrs. N/A

†Propertiesbasedonultimatecure.Epoxypropertiesbasedonmixing20g(.7oz.)massat77°F(25°C).*Varieswithsubstrates.1Contains0.2fl.oz.tubeofLoctite® 330™ Depend® Adhesiveand0.7fl.oz.ampuleofLoctite® 7387™ Depend® Activator. 2 Contains 25 ml syringe of Loctite® 330™ Depend® Adhesive and 25 g aerosol can of Loctite® 7387™ Depend® Activator. 3 Contains 250 ml tube of Loctite® 330™ Depend®Adhesiveand4.5fl.oz.aerosolcanofLoctite® 7387™ Depend® Activator.

Loctite® Product

item Number

Package type

& sizecolor

coverage(ft.2 at ¼" thickness)

maximum temperature† (°f)

compressive strength (psi)†

tensile shear strength†

(psi)

hardness(shore d)

working time

functional cure

mix ratio By Volume

mix ratio By weight

agency approvals

Fixmaster® Fast set steel

putty*39917 1 lb. kit Grey 0.4 200 10,800 4,600 80 3 min. 10 min. 1:1 1.8:1

ABS, CFIA, NEHC,

NAVSEA

Fixmaster® Flex 80™ putty*

97423 1 lb. kit Black 277 in.3 180 N/A N/A 87 10 min. 8 min. 100:40 72:28 ABS

Fixmaster® Metal Magic

steel™*98853 4 oz.

stick Grey 7 in.2 250 12,000 2,500 80 3 min. 10 min. N/A N/A NSF 61

Fixmaster® superior Metal*

97473 40900

1 lb. kit 4 kg kit

Dark Grey

0.25 2.2 250 18,000 5,500 90 20 min. 6 hrs. 4:1 7.25:1 CFIA

Fixmaster® Wear

resistant putty*

98743 3 lb. kit Grey 1.11 225 11,600 4,900 89 30 min.1 hr. fixture,

6 hrs. full cure

2:1 2:1ABS, CFIA,

NEHC, NAVSEA

*Propertiesarebasedonmixing1lb.(453.6g)massat77˚F(25°C),7dayscure.†Ultimatecure.Epoxypropertiesbasedonmixing20g(.7oz.)massat77°F(25°C).


kits / special products / dispensing equipMent

27

loctite® toolboxContaining 16 of the latest and best Loctite® technologies to solve the most common mechanical failures, this kit has everything a professional needs to increase reliability at the base component level.typical use: Field kit.item container size pack38956 Kit 1

loctite® ForM-a-thread® stripped thread repair kitPermanently repairs stripped threads and fasteners in five minutes (up to SAE Grade 5 English and 8.8 metric). Allows up to 1,538 in. lbs. torque (on 1"bolt)and300˚F(149˚C)Resists most shop fluids.typical use: Repairing stripped threads.item container size pack28654 12.9 ml kit 1

loctite® 50 Ml-s Mix nozzleStepped Tip, 6.2" Overall Length, 6.5 mm ID, 20elements;10:1-Scartridgesonly.typical use: Used with 50 ml dual cartridges.item container size pack1034575 20 elements 10

loctite® 50 Ml square Mix nozzlePlastic,disposablenozzlesthatattachdirectly to Loctite® Speedbonder™ dual cartridges. They are designed to mix adhesive automatically as it travels through thestatic-mixnozzle.typical use: Used with speedbonder.item container size pack98473 10nozzels 1

Tech

see page 40


loctite® 50 Ml dual cartridge Manual applicatorsHand held dual cartridge dispenser for 50 ml dual cartridges.typical use: General purpose.item container size pack1034026 1 applicator 1

Loctite® ¼" staiNLess steeL tiPs heLicaL thread High presision dispense needle, 18 guage, stainless steel with vertical thread for secure valve and syringe barrel attachment.typical use: Dispensing needle.item container size pack98196 50 tips 1

Loctite® cauLkiNg guN coNVersioN kit for 50 mL cartridges Converter kit for household caulking gun.typical use: Accepts 50 ml.item container size pack98466 1 Kit 1

general applicationsq: how can loctite® brand adhesive/sealants improve the

quality of service repairs for my customers? A: Quality service repairs with Loctite® brand products

do the following: 1. Prevent fasteners from loosening. Use Loctite® 242®

Threadlocker – Medium Strength liquid or Loctite® QuickStix® 248™ Threadlocker.

2. Seal leaky threaded fittings. Use Loctite® Low Breakloose PST® Thread Sealant liquid or Loctite® QuickStix® 561™ PST® Pipe Sealant.

3. Keep bearings from spinning out. Use Loctite® 609™ Retaining Compound.

4. Restore fit between worn bearings, sleeves, gears, pulleys. Use Loctite® 660™ Quick Meta l® Retaining Compound – Press Fit Repair.

5. Seal flanged assemblies. Use Loctite® Flexible or High Temperature Flange Sealant.

Improve customer satisfaction with all of the above! Don’t put your CSAs at risk with inferior performing products.

q: how do these adhesive/sealants work?A: Applied as a liquid or a paste, they automatically

harden into a tough resin between metal threads or close-fitting parts. They lock and seal after assembly.

q: can i get the parts apart?A: Yes. Use a little extra elbow grease and ordinary

tools on fasteners. Use a bearing puller or a press for bearingsorsleeves.Heatingat550°F(288°C)willhelploosen parts. Take apart while hot.

q: can i re-use the parts?A: Yes. Knock or blow off the loose particles and re-apply

the adhesive/sealant. Material can be removed by wire brush, if necessary.

q: how do i know which product to use?A: Bottles or tubes are named to indicate usage.

For example: Threadlocker indicates use on threaded fasteners.

q: how do i clean the parts?A: Clean with Loctite® 7649™ Primer N™.

q: What happens if i apply adhesive sealant and it doesn’t work?

A: Four things that could have happened: 1. Sufficient material was not applied to fill the joint. 2. Insufficient time was allowed for cure. 3. Parts were excessively oily, dirty or greasy, which

may prevent the adhesive/sealant from curing. 4. The surfaces required a primer before the adhesive/

sealant was applied.

q: What should i do then?A: Clean all parts thoroughly, using a wire wheel or a

putty knife and a solvent. When all parts are clean and dry, apply Loctite® 7649™ Primer N™. Let it dry, then apply the adhesive/sealant. Allow sufficient time to cure.

application q&asgeneraL, gaskeTing, ThreadLocking & bonding

29

gasketing applicationsq: how does loctite® high temperature Flange

sealant work?A: Loctite® High Temperature Flange Sealant forms

the gasket “in place”. When confined between the assembled flanges, the gel-like material automatically converts into a tough sealing gasket. It resists heat to 350°F(177°C).Italsoresistswater,oilandsolvents.Onetubemakesmanysizesandshapesofgaskets.

q: how do i apply loctite® high temperature Flange sealant?

A: Applydirectlyfromthenozzleapplicatoronthetube.No mixing. No heat cure. For most joints, apply a 1/16" (1.59 mm) diameter bead around the bolt holes and between the bolt holes centered on the flanges. Material does not cure until flanges are mated together. Be sure that the material will be in contact with both flanges when parts are assembled.

q: can i get the flanges apart?A: Yes. Tap on flanges to loosen.

q: how do i clean off the cured material?A: For most flanged joints, it is not necessary to remove

the cured material. Wipe off surface with a clean shop towel and apply a new bead, or if it is a very critical dimension joint, remove all residue by scraping with a putty knife or with a wire wheel. Then clean up with Loctite® 7649™ Primer N™ before reassembly.

q: Will hydraulic oil, motor oil, fuel or water dissolve the adhesive/sealant?

A: No. These adhesive/sealants are solvent-resistant to all ordinary liquids and gases.

q: how do i apply adhesive/sealant?A: Simplyapplyfrombottlenozzleortubetoonepart.

Apply sufficient amount to fill the gap between parts. An adhesive/sealant will not harden while in contact with air – it hardens only in the joint after assembly.

q: What happens if i leave the cap off a bottle or tube of anaerobics (threadlocking, thread sealant, gasketing, retaining)?

A: Nothing. It won’t harden in the tube or bottle or evaporate.


q: Where can i use loctite® high temperature Flange sealant?

A: Rigid flanges such as hydrostatic transmission flanges, flywheel housings and other rigid covers or plates. Use only where the change in joint thickness will not affect internal clearances.

q: Where do i use loctite® Flexible anaerobic gasket Flange sealant?

A: It’s specified for sealing flywheel housings to the block on series 3114, 3116 and 3200 engines. It is also specified on differential steering systems on the D-6, 7, 8, 9 and 10 tractors.

q: What do i use to seal track pins to track link bores which may be scratched, scored or rusted on sealed and lubricated track?

A: Loctite® High Flex Form-In-Place Gasket has been successfully used in service to seal these worn parts. Coat both the pin and bore, then press together.

q: Where can i use loctite® brand rtV silicone gasketing/sealants?

A: Use for applications where a highly flexible compound is needed for bonding, sealing, weatherproofing or gasketing. Typical applications are form-in-place gasketing at low pressures, caulking of sheet metal duct work, sealing of electrical boxes, insulating and sealing of electrical wires and terminals, and potting (except around electronic circuits). Use to insulate or seal metal, glass, ceramic, painted and enameled surfaces, and most plastics and rubber, including silicone rubber. Cured sealant will not accept standard paint.

q: Where do i use loctite® 587™ blue, high performance rtV silicone gasket Maker?

A: Use as a general purpose silicone adhesive sealant. It is the best silicone for oil resistance, low odor, non-corrosiveness and low volatility. Suggested for salvage operation sealing on minor damaged flange surfaces at low pressures. Seals gear covers, oil pans, valve covers, transmission and PTO covers. Withstands temperatures to 400°F(204°C)continuous.

q: What temperature will loctite® superflex® red high temp rtV withstand?

A: Loctite® Superflex® High Temp Red RTV bonds, seals, gaskets, caulks, pots and insulates on applications to600°F(316°C).Useonapplicationsthatrequiremaximum heat resistance. Suggested for engines, heat exchangers, air side of turbo chargers and aftercoolers. Also bonds insulation for hard-wrap.

gasketing applications (cont’d.)q: Where do i use loctite® gasket sealants 1 and 2, and

loctite® aviation gasket sealant?A: Use to repair damaged flange surfaces that require

gasket dressing. Suggested for oil pans, transmission covers, water pump flanges, heater valve and similar flanges. Fill uneven surfaces. Withstand pressures to 5,000psi(34,450KPA)andtemperaturesto400°F(204°C).Resist leaks of gasoline, kerosene, fuel and diesel oils, enginelubricants,hotandcoldwater,antifreezeandwater mixtures, grease, mild acids, alkalis, and steam.

q: how do i know which loctite® brand gasket sealant to use?

A: 1. Loctite® Gasket Sealant 1 – Hardening formula (recommended for rigid assemblies). Fills uneven surfaces and seals damaged flanges. Dries quickly to hard set.

2. Loctite® Gasket Sealant 2 – Non-hardening formula (best suited for non-rigid assemblies). Dries slowly. Sets to a pliable film for easy disassembly. Suggested for sealing gasket T-joints on flexible flanges.

3. Loctite® Aviation Gasket Sealant – Thin, brushable formula;sealsclosefitting,finelymachinedsurfaces.Dries slowly to a pliable film. Seals most gaskets, machined surfaces and screw thread connections on engines. Excellent solvent resistance. Meets MIL-S-45180C (Ord.) Type III.

application q&asgeneraL, gaskeTing, ThreadLocking & bonding

31

threadlocking applicationsq: how can i prevent “rusting in” between linkage pins

and cartridge pins and the mating bores?A: Use Loctite® 242® or QuickStix® 248™ Threadlocker

to coat the pin and bore prior to assembly for a rust-free barrier. Applying Loctite® 242® or QuickStix® 248™ Threadlocker eliminates the need for burning out pins on loader linkage arms, excavator sticks, and booms or similar assemblies.

q: are there any performance differences between the new loctite® brand thread treatment sticks (loctite® 248™ and loctite® 268™) and the traditional loctite® brand threadlocker liquids (loctite® 242® and loctite® 271™)?

A: No. Both of the new Loctite® brand Thread Treatment Sticks were designed to maintain the exact performance characteristics of the liquid alternatives.

q: is a primer, like loctite® 7649™ primer n™, necessary when using threadlockers?

A: If the parts are contaminated with dirt and grease, they should be cleaned with a primer in order to ensure optimalperformance.Otheralternativesaretoutilizenew threadlocking technology such as Loctite® 243™ Threadlocker – Oil Resistant. When the metals are inactive, a primer should be used.

q: Which loctite® threadlocker product is best suited for a high shock or vibration application?

A: Loctite® 271™ Threadlocker – High Strength is best suited for heavy equipment applications where shock or vibration are common, such as suspension bolts, motor, and pump mounts.

q: how do i disassemble parts? What is the procedure?A: Use standard hand tools for disassembly of low and

medium strength threadlockers. For high strength threadlockers,applylocalizedheattonutorstudfor5minutesat450°F(232°C).Disassemblewhilehot.

q: What about preassembled fasteners? is there a loctite® brand threadlocker i can use to post-apply to the assembly?

A: Yes. Loctite® 290™ Threadlocker – Medium Strength is a wicking grade. This means that the Threadlocker can be applied to preassembled fasteners and the liquid will seep into the assembly to strengthen the fastener.


bonding applicationsq: on what bonding applications can i use the loctite®

Fixmaster® Fast cure epoxy?A: Use for bonding broken parts, patching holes and

resurfacing corroded areas (can be sanded or painted after cure). Bonds metal, glass, wood, concrete and some plastics. Bonds identification, name and information plates. Fills large gaps.

q: how do i use loctite® 330™ depend® adhesive?A: Unlike epoxies, Loctite® 330™ Depend® Adhesive does

not require mixing, measuring or heating. Make sure all parts are cleaned and dry. Spray activator, then apply adhesive to parts that are to be assembled. Please see the kit box for complete directions. Handling strength in two minutes. Cures to tough powerful bond. Works on all metals, wood, cork, ceramic, glass and most plastics. May eliminate drilling, tapping, riveting or welding. Easy syringe application. Oil resistant. Heat resistantto250°F(121°C).

q: What are some key applications for loctite® 330™ depend® adhesive?

A: Use to bond name plates and serial plates on equipment. Bonds control knobs that loosen under vibration. Bonds dissimilar materials such as metal, wood, plastic and concrete. Bonds porous surfaces. Bonds glass to steel. Use to bond rear view mirror brackets to windshields.

q: how do loctite® Fixmaster® Fast cure epoxy, Mixer cups differ from the other loctite® brand adhesive products previously described?

A: Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups have two parts which must be mixed together. When mixed, the epoxy will cure in air. Comes in a convenient mixer cup for mixing. No mess. No guess. No waste.

retaining applicationsq: can i use loctite® 609™ retaining compound to fill

the clearance between a bearing and worn housing or shaft?

A: Yes. It will fill a clearance up to 0.005" (0.13 mm). Holding power is equal to a press fit.

q: how do i use loctite® 609™ retaining compound to mount bearings?

A: 1. Spray parts with Loctite® 7649™ Primer N™. Let dry 2 or 3 minutes.

2. Apply Loctite® 609™ Retaining Compound. 3. Assemble in normal way. 4. Cure 2 hours at room temperature.

q: how do i install parts with loctite® 620™ retaining compound, high strength?

A: 1. Spray parts with Loctite® 7649™ Primer N™. Let dry 2 or 3 minutes.

2. Spread parts with Loctite® 620™ Retaining Compound – Slip Fit.

3. Install gear. 4. Press fits can be used at once. On slip fits,

allow 2 hours.

Fuel line sealing• Loctite® 592™ PST®

Thread Sealant• Loctite® QuickStix® 561™

PST® Pipe Sealant with PTFE

intake ManiFold gasket• Loctite® 5900® Flange Sealant•Loctite® QuickStix® 248™ Threadlocker

intake ManiFold bolts•Loctite® 242® Threadlocker • Loctite® QuickStix®

248™ Threadlocker

cylinder head bolts•Loctite® 271™ Threadlocker

oil pan gasket• Loctite® QuickStix® 534™

Hi-Tack Gasket Dressingthreaded core plug• Loctite® 540™ –

Cup/Core Plug Sealant

oil Filter Mounting block o-rings•Loctite® Dielectric Grease

dipstick sleeVe• Loctite® 660™ Quick Metal®

Retaining Compound

exhaust ManiFold studs• Loctite® QuickStix® C5-A® Copper

Anti-SeizeLubricant

ValVe coVer• Loctite® 5900® Flange Sealant

ValVe coVer gasket – cork/coMposite gasket• Loctite® Hi-Tack

Gasket Sealant

puMp Flange• Loctite® High Flex Form-In-

Place Gasket

hydraulic lines• Loctite® 545™

Thread Sealant

oil/Water cooling lines• Loctite® 592™ PST®

Thread Sealant•Loctite® QuickStix® 561™


FlyWheel bolts•Loctite® QuickStix®

268™ Threadlocker•Loctite® 271™ Threadlocker

turbo Mounting Flange• Loctite® QuickStix® C5-A®

CopperAnti-SeizeLubricant

engine applications

33

turbo Flange• Loctite® High Temp

Flange Sealant

gloW plugs• Loctite® QuickStix® C5-A®

CopperAnti-SeizeLubricant

diesel injectors• Loctite® 242®

Threadlocker

oil pan coVer• Loctite® High Flex

Form-In-Place Gasket

connecting rod cap bolts•Loctite® 271™ Threadlocker •Loctite® QuickStix®

248™ Threadlocker

crankshaFt sleeVe seal• Loctite® High Flex


threaded Water puMp Fittings• Loctite® 592™ PST®

Thread Sealant•Loctite® QuickStix® 561™


Water puMp Mounting hardWare pulley bolts•Loctite® 242® Threadlocker • Loctite® QuickStix®

248™ Threadlocker

threaded core plugs• Loctite® 592™ PST®

Thread Sealant• Loctite® QuickStix® 561™


Water puMp gasket• Loctite® Hi-Tack

Gasket Sealant

clutch Fan bolts• Loctite® 243™

Threadlocker

tiMing coVer/Front coVer• Loctite® High Flex


harMonic balance bolts•Loctite® 271™

Threadlocker


additional tech tips

housed coMponentssealing/retaining — Metallic seal

porosity sealingexisting Weld porosities and castings

1. Clean the housing I.D. and seal O.D. with parts cleaner.2. Spray both the housing and seal with Loctite® 7649™ Primer N™.3. Apply a bead of Loctite® 243™ or QuickStix® 248™ Threadlocker to the

leading edge of metallic seal O.D. note: Virtually any Loctite® Threadlocking product will work here.

Medium strength liquid is recommended due to normal gap and strength requirement.

4. Install as usual.5. Wipe off excess.6. Allow to cure 30 minutes. note: •Loctite® 243™ or QuickStix® 248™ Threadlocker is normally used

with worn seal housings to prevent leakage or slippage. •Itisnotgenerallynecessarytoremovepre-appliedsealantfrom

seal O.D.

243™ Bead

1. IMPORTANT! TAKE PROPER SAFETY PRECAUTIONS IF WORKING WITH FLAMMABLE LIQUID TANKS. AVOID USE WITH COMPRESSIBLE GASSES.

2. Wire brush to remove paint, rust, etc. from repair area.3. Clean repair area with parts cleaner.4. Applylocalizedheattobringrepairareatoapproximately250°F.5. Allowrepairareatocooltoapproximately185°F.6. Brush or spray sealant on repair area. note: •Steel–UseLoctite® 290™Threadlockerat185°F. •Aluminum/StainlessSteel–UseLoctite® 290™ Threadlocker

at120°F. note: •Notrecommendedfor“blowholes.” •Maximumporositysealed–0.005".7. Allow to cure for 30 minutes (High Pressure, above 150 psi - 1 hour).8. Clean with parts cleaner to remove excess sealant. Do not grind.9. Paint as required. note: Casting repair uses same procedure.

sealing neW Welds — preVentiVe Maintenance1. Remove all slag and scale while hot.2. Applysealantwhenweldis185°Fandfalling.3. Follow information above.

Loctite® 290™

Weld Porosity

Weld Bead

Tank Wall

35

Tech

1. Disassemble and, if necessary, spray all components with Loctite® 7649™ Primer N™. Allow to dry.

2. Apply a thin coating of Loctite® PST® Thread Sealant to union face.3. Apply a band of Loctite® PST® Thread Sealant to male threads.4. Assemble parts snugly.

PST® Band PST® Band

PST® Band PST® Band PST® Band

PST® Coating (may be used for new or damaged seat)

1. Clean parts of contamination. If necessary, spray Loctite® 7649™ Primer N™ onto threaded parts (male and female). Allow to dry.

note: Primer is not required for brass parts.2. Apply a band of Loctite® PST® Thread Sealant to male threads starting

one to two threads from end of pipe.3. Assemble parts snugly. Do not overtighten.4. Ifinitialpressureexceeds1000psi*,wait30minutesbeforepressurizing. note: •Forstainlesssteelcomponents,useLoctite® QuickStix® 561™

PST® Pipe Sealant. •Forgeneralpurposethreadsealing,useLoctite® QuickStix®

561™ PST® Pipe Sealant. •Forfinefiltrationsystemsrequiringzerocontamination,use

Loctite® 545™ Thread Sealant for hydraulic/pneumatic fittings. •Donotusewithsystemscontainingoxygenorstrong

oxidizers(chlorine).

* depending on conditions

pipe unions

thread sealingstandard Fittings – pipes, hydraulic, or air

thread sealingcoMpression Fittings

1. Slide fitting nut and ferrule back approximately ¾" from end of tubing.2. If necessary, spray the entire assembly with Loctite® 7649™ Primer N™.

Allow to dry. note: Primer is not required for brass parts.3. Apply a thin coating of Loctite® PST® Thread Sealant to tubing where

ferrule will be located.4. Slide ferrule forward over Loctite® PST® Thread Sealant coated

tubing, then apply a thin bead of Loctite® PST® Thread Sealant coating to ferrule.

5. Slide ferrule forward over Loctite® PST® Thread Sealant coated tubing.6. Apply a small band of Loctite® PST® Thread Sealant to male threads.7. Assemble and tighten normally. note: Do not use on plastic fittings or tubing.

Flared/sWaged Fittings

1. Disassemble and, if necessary, spray all components with Loctite® 7649™ Primer N™. Allow to dry.

2. Apply a thin coating of Loctite® PST® Thread Sealant to fitting face.3. Apply a band of Loctite® PST® Thread Sealant to male threads.4. Assemble parts snugly.

PST® BandPST® Coating PST® Band

PST® Band

PST® Coating (for new or damaged flare or seat)



37

609™

Shaft

Housing609™

Tech

thread sealinghose ends – air & hydraulic

1. If necessary, spray adapter threads with Loctite® 7649™ Primer N™. Allow to dry.

2. Insert barbed hose stem into hose I.D. with slight twisting motion.3. Install appropriate hose clamp.4. Apply a band of Loctite® PST® Thread Sealant to male hose stem

threads upon installation or adding accessory device. Tighten snugly. note: Loctite® PST® Thread Sealant may attack synthetic rubber tubing.

PST® Band PRESS FIT

shaFt Mounted asseMbliespress Fit

standard1. Clean shaft O.D. and component I.D.2. Apply a bead of Loctite® 609™ Retaining Compound to

circumference of shaft at leading edge of insertion or leading area of engagement.

note: •Retainingcompoundwillalwaysbesqueezedtotheoutsidewhen applied to shaft.

• DO NOT use with Loctite®Anti-Seizesorsimilarproduct.3. Press as usual. Wipe off excess.4. No cure time required. note: Loctite® 609™ Retaining Compound is used due to low

viscosity and wetting properties.

tandeM Mount1. Apply retaining compound to bore of inside component.2. Continue assembly as above.

Bearing

Shaft

609™

housed coMponentsslip Fit

original1. Select component to fit shaft.2. Machine to reduce component O.D. or increase housing I.D. to permit

approximate 0.002"-0.004" diametral slip fit.3. Clean all parts and spray with Loctite® 7649™ Primer N™.4. Apply Loctite® 609™ Retaining Compound to component O.D. 5. Install component. Do not rotate.6. Wipe off excess.7. Allow 5 minutes prior to service.

WornProcedures identical to original slip fit, except:1. Determine the maximum radial gap.2. If the maximum gap exceeds 0.005", Loctite® 7649™ Primer N™

must be used.3. Take steps to maintain concentricity on large gaps.4. Large gaps require longer cure times (30-60 minutes).5. Loctite® 660™ Quick Metal® Retaining Compound is NOT recommended

for radial gaps exceeding 0.010".6. See procedure for BADLY WORN HOUSING, page 40.

gasket dressingsealed Flanges

1. Remove old gasketing material and other heavy contaminants with Loctite® Chisel® Gasket Remover. Use mechanical removal technique if required.

note: Avoid grinding.2. Clean both flanges with parts cleaner.3. Spray Loctite® 7649™ Primer N™ on both flange faces and both sides of

the precut gasket. Allow 1-2 minutes to dry.4. Smear Loctite® Gasket Eliminator® Flange Sealant to both sides of

precut gasket with a clean applicator. 5. Place coated gasket on flange surface and assemble parts immediately. note: •Ifcoverboltsintoblindholes(asabove),applyLoctite® 243™

Threadlocker into hole and on threads. Tighten normally. •Ifitisathruholeboltassembly,applyLoctite® 243™ or

QuickStix® 248™ Threadlocker to bolt threads.6. Tighten normally.

243™

Primer N™ Only243™

243™ Primer N™ and 518™ Gasket Eliminator®

(QuickStix® 534™)


PRESS FIT

strengthen keyed asseMbliesstandard duty

asseMbly1. Clean all parts.2. If necessary, spray all parts (I.D. and O.D.) with Loctite® 7649™

Primer N™.3. Apply Loctite® 660™ Quick Metal® Retaining Compound coating into

keyway and on key.4. Apply dab(s) of Loctite® 660™ Quick Metal® Retaining Compound onto

shaft opposite keyway or evenly spaced around shaft.5. Assemble parts. Wipe off excess.6. Apply a dab of Loctite® 660™ Quick Metal® Retaining Compound to

set screw.7. Tighten set screw.8. Allow 5-10 minutes prior to service. note: • Loctite® 660™ Quick Metal® Retaining Compound is NOT

recommended for radial gaps exceeding 0.010" on shaft or keyway.

disasseMbly1. Tap component and key with hammer.2. Pull as usual.

660™ Quick Metal® coating here

Dab 660™ Quick Metal® or 243™ here

Dab 660™ Quick Metal® here

ForM-in-place siliconesstaMped or sheet Metal Flanges

1. Remove old gasketing material and other heavy contaminants with Loctite® Chisel® Paint Stripper.

2. Clean both flanges with parts cleaner.3. Apply a continuous bead of Loctite® high performance silicones

(587™ Blue) to sealing surface. Circle all bolt holes. note: •Useproperbeaddiametertosealflangewidthanddepth. •Minimizeexcessivematerial“squeeze-out.”4. Assemble within 10 minutes by pressing together. Tighten as required.5. Cleanupanyexcessorsqueeze-out.6. Cure times will vary with temperature, humidity, and gap. Typical full

cure time is 24 hours.

ForM-in-place gasketingsealing cast rigid Flanges

1. Remove old gasketing material and other heavy contaminants with Loctite® Chisel® Gasket Remover. Use mechanical removal technique if required.

note: Avoid grinding.2. Clean both flanges with parts cleaner.3. Spray Loctite® 7649™ Primer N™ on only one surface. Allow 1-2 minutes

to dry.4. Apply a continuous bead of Loctite® Gasket Eliminator® Flange Sealant

to the other surface. note: Circle all bolt holes with sealant, if appropriate.5. Mate parts. Assemble and tighten as required. note: Immediateassemblynotrequired;however,avoiddelays

over 45 minutes.6. Allow to cure:

a. No pressure – immediate service b. Low pressure (up to 500 psi) – 30 to 45 minutes c. High pressure (500 to 2500 psi) – 4 hours d. Extreme high pressure (2500 to 5000 psi) – 24 hours

loctite® brand gasketing quick selector

Continuous Bead

Circle Bolt Holes

Flat Flange Raised Flange

use Product gap fill temp. range

General 518™ gasket eliminator® 0.050" -65°F to 300°F (-54°C to 150°C)

General 515™ gasket eliminator® 0.050" -65°F to 300°F (-54°C to 150°C)

General/Overheadquickstix® 548™

gasket eliminator® 0.010" -65°F to 300°F (-54°C to 150°C)

rustprooFingloctite® extend® rust treatMent

surFace preparation — old steel:Loose or “flaky” rust must be removed. Only conversion of firmly bonded rust will result in durable protection. Oil, grease, old paint, mill scale, form oil, fingerprints, water soluble surfaces and chlorides must be removed to allow Loctite® Extend® Rust Treatment to react with rust. Ideal surfaces will show light rust as well as bare metal surfaces.

rust conVersion tiMe and appearance:Two coats of Loctite® Extend® Rust Treatment are recommended.

The first coat should develop a purple-black color within seconds. The second coat should dry to a black color. The second coat should be applied within 15-30 minutes of the first coat.

application conditions:Loctite® Extend® Rust Treatment may be applied when surface and air arebetween50°Fand90°F(10°Cand32°C).Reactionissloweratlowertemperatures. If temperature is too hot, film may surface dry and bubble. Highhumidityisbeneficial;itslowsdryingbutassistsrustconversion.Loctite® Extend® Rust Treatment should not be applied in conditions of condensing humidity (e.g., fog, dew), on ice, in rain or in heavy sea (salt) spray atmospheres. Steel surface may be damp but not wet (i.e., continuous visible film of water). DO NOT APPLY LOCTITE® EXTEND® RUST TREATMENT TO SURFACES IN DIRECT SUNLIGHT.

application equipMent Methods:Loctite® Extend® Rust Treatment may be applied by brush, roller, or spray. Brush or roller is suitable for small areas. Avoid sags and ridges and keep edges wet by coating about a square yard at a time. Roll away from previously coated area and then roll back. Do not pour unused material back into the original container. NEVER add solvents to Loctite® Extend® Rust Treatment.

Spray application is recommended for larger areas. Airless spray equipment is faster, and provides more effective conversion due to improved surface penetration. Conventional air-spray equipment may be used, but Loctite® Extend® Rust Treatment may require thinning up to 10% with water for proper spraying.

39


Tech

housed coMponentscoMponent centering

excessiVe/eVen Wear1. Position the component in bore.2. Select three equilateral mounting points.3. Determine the radial gap at those points.4. Select appropriate shim stock.5. Cut three pieces approximately 1⁄8" wide to fit bore depth.6. Bond the shims to bore at mounting points using Loctite® 480™ Prism®

Instant Adhesive.7. Assemble per instructions on page 37.

excessiVe/uneVen Wear1. Position the component in bore.2. Select three equilateral mounting points.3. Determine the radial gap at those points.4. Select and cut appropriate shim stock for each point.5. Bond the shims to bore at mounting points using Loctite® 380™ Prism®

Instant Adhesive.6. Assemble per instructions above.

Shims

Shim

Shims

Shim

standard thread repair1. Follow instructions on Loctite® FORM-A-THREAD® package.2. If cover plate is used for bolt alignment: (a) Apply release agent to mating faces around repair area. (b) Use “waxed” paper or similar film between faces.3. A “jiggling/twisting” motion when initially inserting bolt improves

thread conformation. note: NOT intended for engine stud repair.

sMall hole/Fine thread repairoption 1 Drilloutdamagedholetooversize,thenfollowSTANDARD

THREAD REPAIR.option 2 Apply Loctite® FORM-A-THREAD® to screw and insert into

damaged hole. Clamp in place while product cures.

stud installation — perManent (light duty)1. Use stud or cut “all thread” to desired length.2. Do NOT apply release agent to stud.3. Proceed as with standard thread repair.4. Allow 30 minutes to cure.5. Assemble as required.

Release Agent

StrippedThreads

Tape Tape

Step 1

FORM-A- THREAD®

½ Fill Only

Release Agent

Step 2

FORM-A- THREAD®

Cleaned Bolt

Step 3

Threadlocker

NewThreads

CoverPlate

thread repairstripped thread repair


bondingintroduction to bonding adhesiVesWithin the broad range of Loctite® brand adhesives you will always find the solution to your bonding challenge. It is, however, extremely important to have at least basic knowledge of adhesive methodology in order to successfully bond two substrates together. The three major causes of bonding failures are attributed to:

• Poorevaluationofthebondingassembly

• Inadequatesubstratepreparation

• Improperadhesiveselection

bonding asseMblyBonding assembly has a direct impact in the adhesive performance. Choose acombinationoftypesofjointsorjointstressdistributionthatmaximizesbonding strength. Below are different types of joints and stress distribution:

types oF joints

types oF joint stress distribution

joint Width Vs. oVerlapA wider bond line (Width) will be stronger than a lengthier one (Overlap):

BUTTFAIR

OVERLAPGOOD

SINGLE STRAP BETTER

DOUBLE STRAP BEST

SHEARBETTER

COMPRESSIVEBEST

CLEAVAGE/PEELFAIR

TENSILEGOOD

OVERLAPWIDTH

bondingsurFace preparationabrasive Methods

Rubbing or striking a surface with hard, coarse material. Abrasive examples:

• Sanding:Rubbingwithabrasivepaperorcloth(forsmallarea/superficialwear-down)

• Blasting:Strikingwithsteelgrit,sand,orotherabrasivematerial(forlarge areas/deep wear-down)

chemical Methods

Cleaning process that uses solvents to dissolve contaminants. Chemical examples:

• SolventDip:Immersinginsolvent

• SolventWipe:Rubbingwithsolvent-soakedwipe

• VaporDegreasing:Solventinvaporform

• UltrasonicCleaning:Solventdipmethodwithhigh-frequencysound waves that vibrate the dirt away

o-ring Making

1. Cutthestartingendofthecordstockwithacleanrazorblade.Ensurethe cut is clean and square. Do not touch the clean cut end.

2. Measure cord stock to appropriate length. For precise measurement, use Loctite® O-Ring Tool or the ruler provided in the Loctite® O-Ring Making Kit.

3. Cutthemeasuredendofthecordstockwithacleanrazorblade. Ensurethecutiscleanandsquaretooptimizebondarea.

4. Apply one drop of Loctite® 404™ Quick Set™ Instant Adhesive and mate the two ends of the cord stock.

41


Tech

troubleshootingchecklist1. What type of failure is occurring? Has the application worked before?

2. Was proper and adequate adhesive/sealant used?

3. Was proper and adequate primer/activator used?

4. Do service conditions exceed the capability of the adhesive sealant? (a) operating temperature (c) fluid compatibility (b) excessive pressure too soon (d) impact on environment

5. Were parts adequately cleaned prior to applying adhesive? note: If adhesive failure, is cured residue on one or both parts?

If one part is bare, check that part for contamination.

6. Wereproperassemblytechniquesutilized?

7. Was adhesive/sealant allowed adequate cure time prior to service?

8. Do assembly/part conditions exceed capability of the adhesive/sealant? (a) excessive gaps (c) improper joint design (b) component materials (d) inadequate clamping/fixturing

9. If additional assistance is required, please call our HENKEL TECHNICAL INFORMATION LINE. See back cover for the Henkel Technical Information number in your area.

note: Reference Materials (a) Product Selector Slide Rule (LT-776)

(b) Loctite® Fluid Compatibility Chart (LT-836)

liMitation oF WarrantyThe data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazardsthatmaybeinvolvedinthehandlingandusethereof.

In light of the foregoing, HENKEL CORPORATION SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARISING FROM SALE OR USE OF HENKEL CORPORATION’S PRODUCTS. HENKEL CORPORATION SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST PROFITS. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents which may cover such processes or compositions. We recommend that each prospective user test the proposed application to determine its suitability for the purposes intended prior to incorporating any product or application in its manufacturing process using this data as a guide. Some products may be covered by one or more United States or foreign patents or patent applications.


indexes

product description page no.

loctite® 1/4 in. stainless steel tips helical thread 28

loctite® 50 ml dual cartridge Manual applicators 28

loctite® 50 ml-s Mix nozzle 27

loctite® 50 ml square Mix nozzle 27

loctite® 222™ threadlocker 3, 6

loctite® 242® threadlocker 3, 6, 29, 32, 33, 34

loctite® 243™ threadlocker 3, 6, 32, 34, 35, 38

loctite® 271™ threadlocker 4, 6, 32, 33, 34



loctite® 290™ threadlocker 5, 6, 32, 35

loctite® 330™ depend® adhesive 22, 26, 32

loctite® 332™ structural adhesive 22, 26

loctite® 380™ black Max® instant adhesive 25, 26, 40

loctite® 401™ prism® instant adhesive 23, 26


loctite® 410™ prism® tough 24, 26


loctite® 414™ super bonder® 24, 26




loctite® 495™ super bonder®instant adhesive 25, 26

loctite® 496™ super bonder® 25, 26

loctite® 498™ super bonder® instant adhesive 25, 26

loctite® 510™ gasket eliminator® Flange sealant 12, 14



loctite® 536™ low breakloose pst® 7, 8

loctite® 540™ retaining compound 9, 10, 33

loctite® 545™ thread sealant 7, 8, 33, 36

loctite® 587™ blue, high performance rtV silicone 11, 14, 38

loctite® 592™ pst® thread sealant 8, 33, 34

loctite® 598™ black, high performance rtV silicone 12, 14

loctite® product description index

43


loctite® 609™ retaining compound 9, 29, 32, 37

loctite® 620™ retaining compound 9, 32



loctite® 648™ retaining compound 10

loctite® 660™ quick Metal® retaining compound 10, 29, 33, 37, 38

loctite® 3034™ structural adhesive 24, 26

loctite® 5127™ Flexible anaerobic gasket Flange sealant 12, 14

loctite® 5699™ grey, high performance rtV silicone 11, 14

loctite® 5900® Flange sealant 12, 14, 33

loctite® 5999™ Flange sealant 14

loctite® 7088™ quickstix® primer 5, 6

loctite® 7090™ primer – actiVator 5, 6

loctite® 7091™ primer – actiVator 5, 6

loctite® 7649™ primer n™ 5, 6, 8, 29, 30, 32, 35, 36, 37, 38, 39

loctite® all purpose spray adhesive 23, 26

loctite® aviation gasket sealant 13, 14, 31

loctite® black contact adhesive 22, 26

loctite® c5-a® copper anti-seize lubricant 17, 18

loctite® caulking gun conversion kit for 50 ml cartridges 28

loctite® chisel® gasket remover 20, 38, 39

loctite® clover® silicon carbide grease Mix 19

loctite® contact adhesive 22, 26

loctite® dielectric grease 15, 33

loctite® extend® rust treatment 20, 39

loctite® Fixmaster® Fast cure epoxy (Mixer cups) 21, 26, 32

loctite® Fixmaster® Fast set steel putty 22, 26

loctite® Fixmaster® Flex 80™ putty 22, 26

loctite® Fixmaster® Magna-crete™ 22, 26

loctite® Fixmaster® Metal Magic steel™ 21, 26

loctite® Fixmaster® superior Metal 21, 26

loctite® Fixmaster® Wear resistant putty 22, 26

loctite® Form-a-thread® stripped thread repair kit 27, 40

loctite® Freeze & release 16




loctite® gasket sealant 1 12, 14, 31

loctite® gasket sealant 2 12, 14, 31

loctite® gear, chain and cable lubricant 16

loctite® general epoxy (Mixer cups) 21

loctite® graphite 50™ anti-seize 18

loctite® h3000™ speedbonder™ structural adhesive 23, 26

loctite® high Flex Form-in-place gasket 13, 14, 30 33, 34

loctite® high temp Flange sealant 12, 14, 34

loctite® hi-tack gasket sealant 13, 14, 33, 34

loctite® Maxi-coat™ rust inhibitor 20

loctite® Maximum strength headliner adhesive 22

loctite® Moly dry Film lubricant 16

loctite® Moly paste 17 , 18

loctite® nickel anti-seize 18

loctite® non-chlorinated parts cleaner 20

loctite® nonFlammable electrical contact cleaner 19

loctite® penetrating oil 16

loctite® quickstix® 248™ threadlocker 4, 6, 29, 32, 33, 34, 35, 38

loctite® quickstix® 268™ threadlocker 4, 6, 32

loctite® quickstix® 534™ hi-tack 11, 14, 33

loctite® quickstix® 548™ gasket eliminator® Flange sealant 11, 14

loctite® quickstix® 561™ pst® 8, 29, 33, 34, 36

loctite® quickstix® 668™ retaining compound 10

loctite® quickstix® c5-a® copper anti-seize lubricant 17 , 18, 33, 34

loctite® quickstix® silver grade anti-seize 18

loctite® quicktape™ 249™ threadlocker 4, 6

loctite® quicktite® gel 25, 26

loctite® silicone lubricant 16

loctite® solvo-rust® super penetrating oil 16

loctite® superflex® red high temp rtV silicone adhesive sealant 13, 14

loctite® superflex® rtV silicone adhesive sealant 14

loctite® thread seal tape 8

loctite® toolbox 27

loctite® Viperlube® high performance synthetic grease 15

Mc-Free chisel® gasket cleaner 19, 38


indexes

45

old cat part no.

loctite® iteM no. product description page no.

119-0781 59575 loctite® superflex® 595™ rtV silicone adhesive – clear 14

138-8436 1540591 loctite® hi-tack gasket sealant (Fomerly 30525) 13, 14

141-5830 40464 loctite® superflex® rtV silicone adhesive sealant – black 14

141-5831 40462 loctite® 587™ blue, high performance rtv silicone gasket Maker 11, 14

144-7779 97423 loctite® Fixmaster® Flex 80™ putty 22, 26

152-9155 38004 loctite® 380™ black Max® instant adhesive 25, 26

154-9731 27121 loctite® 271™ threadlocker – high strength 4, 6

155-0695 27131 loctite® 271™ threadlocker – high strength 4, 6

157-7228 41404 loctite® 414™ super bonder® 24, 26

165-2601 20166 loctite® 5900® Flange sealant 12, 14

169-5464 21348 loctite® 7649™ primer n™ 5, 6, 8, 10

1u-6132 98743 loctite® Fixmaster® Wear resistant putty 22, 26

1u-6136 97473 loctite® Fixmaster® superior Metal 21, 26

1u-6140 39917 loctite® Fixmaster® Fast set steel putty 22, 26

1u-8846 38657 loctite® high Flex Form-in-place gasket 13

209-0987 83001 loctite® h3000™ speedbonder™ 23, 26

222-3110 81251 loctite® gear, chain and cable lubricant 16

222-3113 30544 loctite® spray adhesive 23, 26

222-3114 51003 loctite® c5-a® copper anti-seize lubricant 17, 18

222-3115 81252 loctite® solvo-rust® super penetrating oil 16

222-3117 & 222-3118 30545 loctite® non-chlorinated parts cleaner 20

222-3121 51211 loctite® Maxi-coat™ rust inhibitor 20

222-3123 51221 loctite® penetrating oil 16

222-3124 1174633 loctite® nonflammable electrical contact cleaner 19

226-6624 39473 loctite® clover® silicon carbide grease Mix – 80 grit 19

242-6990 39895 loctite® Moly dry Film lubricant 16

266-3144 21427 loctite® Fixmaster® general purpose epoxy Mixer cups 21

269-1943 66040 loctite® 660™ quick Metal® retaining compound – press Fit 10

308-3506 20251 loctite® 330™ depend® adhesive 22, 26

337-7965 77164 loctite® nickel anti seize lubricant 18

3s-6252 59330 loctite® superflex® 593™ rtV silicone sealer – black 14

4c-4030 24221 loctite® 242® threadlocker – Med strength 3, 6

4c-4032 60921 loctite® 609™ retaining compound – press Fit/general purpose 9, 10

4c-5300 17430 loctite® 5127™ Flexible anaerobic gasket Flange sealant 12, 14

4c-5592 & 4c5593 51084 loctite® graphite-50™ anti-seize lubricant 18

4c-5598 51144 loctite® c5-a® copper anti-seize lubricant 17, 18

4c-5599 51147 loctite® c5-a® copper anti-seize lubricant 17, 18

4c-9501 30511 loctite® gasket sealant 1 12, 14

4c-9502 30514 loctite® gasket sealant 2 12, 14

4c-9505 30517 loctite® aviation gasket sealant 13, 14

4c-9506 62015 loctite® 620™ retaining compound – slip Fit/high temp. 9, 10

4c-9507 62040 loctite® 620™ retaining compound – slip Fit/high temp. 9, 10

4c-9509 29031 loctite® 290™ threadlocker – high strength Wicking grade 5, 6

4c-9612 59830 loctite® 598™ black, high performance rtV silicone gasket Maker 12, 14

4c-9614 59630 loctite® superflex® red high temp rtV silicone adhesive sealant 13, 14

5h-2471 30540 loctite® black contact adhesive 22, 26

5p-3413 38363 loctite® 536™ low breakloose pst® pipe sealant 7, 8

5p-3931 51008 loctite® c5-a® copper anti-seize lubricant 17, 18

6V-4876 51084 loctite® graphite 50™ anti-seize 18

6V-6640 38364 loctite® hi-temp Flange sealant 12, 14

7M-7456 60931 loctite® 609™ retaining compound – press Fit/general purpose 9, 10

8t-0065 59430 loctite® superflex® 594™ rtV silicone – White 14

8t-9013 59675 loctite® superflex® red high temp rtV silicone adhesive sealant 13, 14

8t-9014 51388 loctite® superflex® rtV silicone adhesive, non corrosive – clear 14

8t-9018 & 8t-9019 98853 loctite® Fixmaster® Metal Magic steel™ 21, 26

8t-9022 30533 loctite® superflex® rtV silicone adhesive sealant – blue 14

9s-3263 24231 loctite® 242® threadlocker – Med strength 3, 6

caterpillar product nuMber index


FOR TECHNICAL ASSISTANCE, CALL PRODUCT ENGINEERING FOR NORTH AmERICA AT 1.800.LOCTITE (562.8483), THEN PRESS 3.

FOR ADDITIONAL INFORmATION, PLEASE GO TO www.USELOCTITE.COm/CATERPILLAR.

Except as otherwise noted, all marks used in LT-3820 are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® = registered in the U.S. Patent and Trademark Office. Cat and Caterpillar are registered trademarks of Caterpillar Inc. Inconel and Monel are trademarks of Huntington Alloys Corporation. Kovar is a trademark of CRS Holdings, Inc. Magna-Crete is a trademark of Kelly Restoration. UL is a trademark of Underwriters Laboratories Inc. ULC is a trademark of Underwriters Laboratories of Canada. NSF is a trademark of NSF International. CSA is a trademark of CSA International. © Henkel Corporation, 2011. All rights reserved. 7439/LT-3820 (12/11)

Cover photos and interior photos of heavy equipment courtesy of Caterpillar, Inc.

Documents

Loctite - CAT Part Numbers