Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
KROHNE Academy
Process Measurement & Safety Control in practice 3rd June 2012 Yanbu / 4th June 2012 Riyadh 5th June 2012 Al-Khobar
organized by
Process Measurement & Safety Control in practice
Binzagr is organising a series of seminars in 2012 titled “Process Measurement & Safety Control in practice“ in collaboration with leaders in their respective fields; KROHNE, DET-TRONICS and TURCK. Visiting 3 regions across Saudi Arabia, these one-day seminars are aimed at plant engineers, operators and contractors from across the process industries.
The KROHNE Academy is not a product promoting seminar series, but instead it aims to bring industry experts together under one roof to provide an insight into the various tech-nologies, industrial standards and procedures that plant operators can find themselves faced with. It will address key operating issues from plant safety to ways of increasing plant efficiency and controlling costs.
In addition to the seminar programme, an exhibition will be running during the break times, which will show possible solutions to some of the topics discussed. It will also provide an ideal opportunity to speak to the experts and benefit from their vast application knowledge.
The KROHNE Academy is a completely free event for registered delegates.
Tel.: +966 38640980 151 Fax: +966 38649698 E-Mail: [email protected]: www.sa.krohne.com/academy
I would like to register for the following date:
Registration
Name, Surname
Company
Job Title
Address
Town, Postcode
Telephone
Fax
Date Signature
Hotelroom from Saturday to SundayYanbu Movenpick Hotel & Resort Sunday, 3rd June 2012
Hotelroom from Sunday to MondayRiyadh Holiday Inn Al-Qasr Monday, 4th June 2012
Hotelroom from Monday to TuesdayAl-Khobar Dharan International Hotel Tuesday, 5th June 2012
© K
ROH
NE
04/2
012
Sub
ject
to c
hang
e w
ithou
t not
ice.
ContactBinzagr Factory for Insulation Materials Co. LTBinzagr Building POBox 96, Dhahran St Al Khobar 31952 Saudi Arabia
RegistrationTel.: +966 38640980 151 Fax: +966 38649698 E-Mail: [email protected]: www.sa.krohne.com/academy
Binzagr International Trading Co (BITCO)is a division of Binzagr Factory for Insulation Materials. Based in Al-Khobar BITCO has also offices and sales engineers in Jeddah and Riyadh. In addition it has an Assembly & Field Service Facility in Jubail.
BITCO is organized into 4 self contained operating units: Rotating Equipment, Instrumentation, Control Valves and Assembly & Field Service. BITCO can not only supply the products but also can provide a “one stop shop” for its instrumentation products with a full installation, commissioning and after sales service.
For more details visit our website www.bfim.com.sa
Organiser
KROHNE Messtechnik GmbHis one of the world’s leading designers, developers and manufacturers of innovative and reliable process measuring technology and has over 90 years of experience in providing flow, level, temperature, analysis and pressure instrumentation to all industry sectors around the globe.
DET-TRONICSis a global leader in industrial hazard safety solutions, providing flame detection, gas detection, and hazard mitigation systems for critical industrial applications. We design, build, test, and commission SIL 2 flame and gas safety systems that range from conventional panels to fault-tolerant, addressable systems. Our flame and gas detectors are globally certified to the latest product appro-val standards.
Hans Turck GmbH & Co. KG is a leading manufacturer in industrial automation. With an enormously versatile range of more than 13,000 sensor, fieldbus, interface and connectivity products, Turck offers highly efficient product solutions for factory and process automation.
Exhibitors and Presenters
Locations
YanbuMovenpick Hotel & Resort Al Mahaar Island, Royal Commission21477 Yanbu www.moevenpick-hotels.com
RiyadhHoliday Inn – Al Qasr Olaya District, King Fahd Road 11482 Riyadh www.alqasrhi.com
Al-KhobarDhahran International Hotel Dhahran Airport 31932 Al Khobar www.dhahotel.com.sa
Yanbu Riyadh
Al-Khobar
Participation is free.
On the following pages you will find all the seminar topics and their content. The presentations will take place in five separate rooms and you will have the opportunity to compose your own individual seminar programme by picking and choosing which seminars to attend, depending on what is of most interest to you.
In each room, print-outs of the presentations will be available allowing you to build a file based on your own series of presentations.
Please register with the reply form or visit our website www.sa.krohne.com/academy
We look forward to meeting you.
Customised Seminar Programme
Room 3
Room 2
Room 1
Room 4
Room 5Exhibition room
Entrance
Welcome in Room 1
Lecture in Room 1 Lecture in Room 4 Lecture in Room 5Lecture in Room 2 Lecture in Room 3
08:00-08:45 h Breakfast & Exhibition
09:00 - 10:00 h
KROHNE
Basics of SIL
This presentation explains the basics of functional safety: Overview of related standards and guidelines. Basic principles of calculation and layout of safety loops. Description of basic parameters such as HFT, SFF and PFD. Practical examples will desribe how all parameters and rules have to be taken into account.
10:00 - 10:30 h Coffee & Exhibition
10:30 - 11:30 h
KROHNE
Practical Examples of Safety Loop Design
Based on the previous presentation, six different examples from process automation, covering a wide range of applications, are presented. The design, calculation and the risk analysis of safety loops will be described in detail for each application. Prior to that, a thorough analysis of existing generic data is given.
11:30 - 12:00 h Coffee, Prayer Time & Exhibition
12:00 - 13:00 h
KROHNE
SIL – Life Cycle Management
This presentation describes in detail all necessary steps for the Life Cycle management acc. To IEC 61508. This comprises planning, risk analysis, validation, documentation, optimazitation and the complete maintenance process. Practical examples are given to each of the steps, allowing to get full comprehenshion for the subject.
09:00 - 10:00 h
KROHNE
Basics of Flow Measurement
All comonly used flow measurement technics are explained: Coriolis, Ultrasonic VA, DPand Vrotex. Practical examples are given next to theoretical backgronds. A detailed comparison of all measurements with their respective pros and cons will be provided.
10:00 - 10:30 h Coffee & Exhibition
10:30 - 11:30 h
KROHNE
Measurement Solutions for the Oil & Gas Industry
General requirements and basics of custody transfer (CT) measurement. Thorough description of CT measurement techniques and regulations in gas border stations, storages and distribution. Oil measurement in refineries covers the last part of the presentation. „Calibration of CT measurement devices for oil and gas applications.“
11:30 - 12:00 h Coffee, Prayer Time & Exhibition
12:00 - 13:00 h
KROHNE
Pipeline Leakage Detection
This presentations provides detailded information regaring technical possibilities to realize leakage detection for pipelines: Gas, liquids and refined products are covered. Next to theoretical fundamentals, many practical examples are shown and technical limitations in terms of accuracy and responste time are explained in details.
09:00 - 10:00 h
KROHNE
Basics of Level Measurement
Firstly, a comprehensive overview to radar and TDI level measurement systems is given. Discussion of limits, advantages, disadvantages, accuracy for liquid and solid applications will provide the necessary comprehension to allow for the right selection of level meters in common applications. Many practical examples are shown.
10:00 - 10:30 h Coffee & Exhibition
10:30 - 11:30 h
KROHNE
Measurement Solutions in Water and Wastewater Industry
This presentation describes applications in water abstraction, treatment, distribution, dewatering and irrigation. Regarding the wastewater applications fully and partially filled pipe applications will be covered. Furthermore, water analytical measurement will be described.
11:30 - 12:00 h Coffee, Prayer Time & Exhibition
12:00 - 13:00 h
KROHNE
Measurement Solutions in Food Industry
Based on the previous presentation “Basics of Flow Measurement“, food related applications are described by means of practical examples: Mass and volumentric flow measurments of traditional food processes. Prior to that new technologies are described regarding inline measurement of protein, fat and lactose. This part covers the related applications and their possibilities and limits.
09:00 - 10:00 h
TURCK
Process Wiring Solutions
Introduction of new technologies of inter-connecting instruments in the field, to junction boxes, and eventually to the marshalling cabinets, using a Quick-Disconnect mechanism, which is approved in Hazardous Area Locations. A discussion on the advantages of this type of technology including features, advantages and benefits.
10:00 - 10:30 h Coffee & exhibition
10:30 - 11:30 h
TURCK
Radio Frequency Identification (RFID)
Leading edge technology which can exchange information via wireless transmission without physical contact and without direct line of sight. This allows all kinds of assets to be tagged and identified. This presentation discusses the technology and the accessibility of the data.
11:30 - 12:00 h Coffee, prayer time & exhibition
12:00 - 13:00 h
TURCK
Wireless Solutions
This type of wireless network is license-free technology, approved for use in Kingdom of Saudi Arabia. This presentation show cases and two Aramco applications where this technology is currently being used and saves money in cabling costs. It also discusses other applications where this type of technology can be of benefit.
09:00 - 10:00 h
DET-TRONICS
Optical Flame Detection
Selection criteria for optical flame detection: Discussions and comparison of optical flame detection technologies and there strengths and limitations, including UV (ultraviolet), IR (Infrared), UV/IR and Multi-Spectrum IR (IR3).
10:00 - 10:30 h Coffee & Exhibition
10:30 - 11:30 h
DET-TRONICS
Combustible Gas Detection
Selection criteria for combustible gas detection: Discussions and comparison of point detection including catalytic bead and infrared technologies, open path infrared hydrocarbon gas detection
11:30 - 12:00 h Coffee, Prayer Time & Exhibition
12:00 - 13:00 h
DET-TRONICS
H2S (Hydrogen Sulfide) gas detection
Selection criteria for H2S gas detection: Discussions and comparison of point detection including MOS (metal oxide semi-conductor) NTMOS (Nano Technology MOS), and electro chemical technologies, along with open path TLD (tunable laser diode) Open Path H2S gas detection
Lunch
08:45-09:00 h WelcomeIntroduction of the organisers of the KROHNE Academy. Presentation of the companies and their areas of expertise.
13:00-14:30 h Lunch