2
AGM Start-Stop Battery LN3 Advantages EN 50342 VDA GB/T5008.1-2013 The AGM start-stop battery in which new lead-carbon technology and advanced lead alloy formula adopted is suitable for the vehicle with start/stop system, it has excellent charge acceptance and cold starting performance, especially the PSoC and high-low temperature cycle life are outstanding compared to the similar products on the market. Compliant Standards Advanced Grid Production Technology: The battery has excellent anti-corrosion performance because of new alloy formula and advanced cold rolled grid technology; Also, very little water loss significantly extend the service life of the battery in high temperature environment. AGM Technology: Oxygen released from positive pole can react with negative lead and gas emissions are controlled by special valve construction, which prevent vehicle components installed near the battery from being corroded; At the same time, due to AGM technology the battery has no free liquid electrolyte, even if the battery is cracked in the sudden accident such as intense turbulence or high speed collision it can still normally start vehicles. High Assembly Pressure Design: High assembly pressure design can slow the positive paste shedding and prolong its life time greatly. Lead Carbon Technology: With the most advanced composite carbon material, the battery’s charge acceptance is significantly improved, thereforeit can more quickly capture the feedback current from vehicle. Long Cycle Life: The starting life is more than120000 times, 2 times longer than ordinary battery. Nominal Voltage Capacity Reserve Capacity Weight Dimesions CCA-18°CSelf Discharge @ 25°C (77°F) Operating Temperature Range Acceptable Charging Current Charging Voltage @ 25°C (77°F) Case Materials Terminal Technical Parameters 12 V 70 Ah @ 20hr to 10.5 V @ 25°C(77°F) 125 min @ 25°C(77°F) 20.5 kg(45.2 Ibs) 278×175×190 mm 760 A to 6.0 V @ -18°C(EN) <8% after 90 days storage -30°C70°C(-22°F158°F) 0140 A 13.514.8 V/cell High temperature resistant materials Tapered terminal(Left:negative;Right:positive)

LN3 - shuangdeng · LN3 Advantages EN 50342 VDA ... 20.5 kg(45.2 Ibs) 278×175×190 mm 760 A to 6.0 V @ -18°C(EN) ... 13 0 500 1000 1500 2000 2500 3000 35 00 40

Embed Size (px)

Citation preview

Page 1: LN3 - shuangdeng · LN3 Advantages EN 50342 VDA ... 20.5 kg(45.2 Ibs) 278×175×190 mm 760 A to 6.0 V @ -18°C(EN) ... 13 0 500 1000 1500 2000 2500 3000 35 00 40

AGM Start-Stop BatteryLN3

Advantages

EN 50342

VDA

GB/T5008.1-2013

The AGM start-stop battery in which new lead-carbon technology and

advanced lead alloy formula adopted is suitable for the vehicle with

start/stop system, it has excellent charge acceptance and cold starting

performance, especially the PSoC and high-low temperature cycle life are

outstanding compared to the similar products on the market.

Compliant Standards

Advanced Grid Production Technology: The battery has excellent anti-corrosion performance because of new alloy formula and advanced cold rolled grid technology; Also, very little water loss signi�cantly extend the service life of the battery in high temperature environment.AGM Technology: Oxygen released from positive pole can react with negative lead and gas emissions are controlled by special valve construction, which prevent vehicle components installed near the battery from being corroded; At the same time, due to AGM technology the battery has no free liquid electrolyte, even if the battery is cracked in the sudden accident such as intense turbulence or high speed collision it can still normally start vehicles.High Assembly Pressure Design: High assembly pressure design can slow the positive paste shedding and prolong its life time greatly.Lead Carbon Technology: With the most advanced composite carbon material, the battery’s chargeacceptance is signi�cantly improved, therefore,it can more quickly capture the feedback current from vehicle.Long Cycle Life: The starting life is more than120000 times, 2 times longer than ordinary battery.

Nominal Voltage

Capacity

Reserve Capacity

Weight

Dimesions

CCA(-18°C)

Self Discharge @ 25°C (77°F)

Operating Temperature Range

Acceptable Charging Current

Charging Voltage @ 25°C (77°F)

Case Materials

Terminal

Technical Parameters12 V

70 Ah @ 20hr to 10.5 V @ 25°C(77°F)

125 min @ 25°C(77°F)

20.5 kg(45.2 Ibs)

278×175×190 mm

760 A to 6.0 V @ -18°C(EN)

<8% after 90 days storage

-30°C~70°C(-22°F~158°F)

0~140 A

13.5~14.8 V/cell

High temperature resistant materials

Tapered terminal(Left:negative;Right:positive)

Page 2: LN3 - shuangdeng · LN3 Advantages EN 50342 VDA ... 20.5 kg(45.2 Ibs) 278×175×190 mm 760 A to 6.0 V @ -18°C(EN) ... 13 0 500 1000 1500 2000 2500 3000 35 00 40

GFM SeriesVRLA BatteryAGM Start-Stop BatteryLN3

Dimensions

278mm 175mm

190m

m

Performance Curves

V2.0

201

7031

0EN

Curve of Self-discharge at Di�erent Temperature

20

40

60

80

100

0 3 6 9 12 15 18 21 24Storage Time (months)

10℃

20℃

30℃40℃

Capa

city

(%)

6

7

8

9

10

11

12

13

0 500 1000 1500 2000 2500 3000 3500 4000

Cycle Number

Cycle Life at 25°C and 17.5% Depth of Discharge

0

2

4

6

8

10

12

14

0 100 200 300 400 500 600Cycle Number

Volta

ge(V

)Vo

ltage

(V)

Cycle Life at 40°C and 50% Depth of Discharge

Idling- S top L ife at 25°C

0

2

4

6

8

10

12

14

0 20000 40000 60000 80000 100000 120000 140000Cycle Number

Volta

ge(V

)