LL Contract Seating 2019 Price List · ISO 9001:2015 ISO 14001:2015 ISO 45001:2018. Page 2 • ... Chair Safety Tips Shipping How to Order C.O.M / C.O.L Fabrics Act Performance Symbols

•Pageglobalcontract.com 1

• September 2019GLOBALContract

•Pageglobalcontract.com 1•Pageglobalcontract.com 1

SeatingPrice List2019

Visit us on the Internet at globalcontract.com • (416) 739-5000

Global Contract Inc., 565 Petrolia RoadNorth York, Ontario, M3J 2X8

REVISED: OCTOBER 2019

ISO 9001:2015 ISO 14001:2015 ISO 45001:2018

Page • globalcontract.com2


CHAIR SAFETY TIPS

TABLE OF CONTENTSCommon sense guidelines to ensure that your GlobalContract chair will provide many years of comfort and service in a safe and productive environment.1. Always read and follow assembly instructions. Make sure that all of the pieces of your GLOBALCONTRACT chair are installed in the proper order to ensure structural integrity.

2. Ensure that chair casters are fully inserted into the base of the unit.

3. Inspect your chair for loose or worn parts annually.

4. Always keep the base of your chair completely on the floor.

5. Most GLOBALCONTRACT chairs are equipped with casters for use on carpeted surfaces. Other flooring surfaces may require different casters. Speak to your GLOBALCONTRACT Sales Representative for appropriate custom selections.

6. Many GlobalContract office chairs are equipped with tension control on the seating mechanism. Tension control compensates for different body weights and postures. Always ensure that the lever is properly adjusted for a smooth and controlled tilt motion. Your GLOBALCONTRACT Sales Representative can demonstrate the proper use of all of the adjustments on your office chair.

7. Do not stand on your GLOBALCONTRACT chair or sit on the arms of your chair.

8. Do not leave electrical appliances on chairs while plugged in. Even fire retardant fabrics can be damaged when exposed to direct heat or flame.

9. Choose the right chair for your work environment. Your GLOBALCONTRACT Sales Representative is trained to help you make the right choice for your workplace.

10. All tilter chairs including synchro tilters and multi-tilters must be purchased with arms to prevent any tipping and injury.

JacksonLondonMarchéSasWellingtonZooey

BallaraBallara BenchBridges CollaborativeDoubletonDriftJeoLuxMinoloMLML ParkOrionVentureVitrolaTablets

MuranoPreferPriorityProiettoSolar

Chair Safety TipsShippingHow to Order C.O.M / C.O.L FabricsAct Performance SymbolsContact InformationFabrics and FinishesArm OptionsTerms and ConditionsWarranty

020203030304050608

1014161718

202021232526

2633354444484950515354555759

Task Seating

General Information

Guest Seating

Lounge Seating

P.02

P.10

P.20

P.26

Seating Misc P.60Seating Parts 60

SHIPPING

CASTERS / GLIDESHC Hard Casters (Carpet surface) Standard CasterSC Soft Casters (Hard floor surface) $80HG Hard Glides (Carpet surface) $53

Hardfloor Carpet

All chairs come fully assembled.

Option for shipped (KD) Knocked Down noted on specified individual chair listing.

A a



GENERAL INFORMATION

CONTACT INFORMATION

HOW TO ORDER C.O.M / C.O.L FABRICS

ACT PERFORMANCE SYMBOLS

1. Prior to placing a C.O.M./C.O.L. order, a sample cutting of the material must be submitted to GLOBALCONTRACT for approval along with a GLOBALCONTRACT C.O.M./C.O.L. order form.

2. For solid colours a 12” x 12” memo sample must be submitted. For fabrics with a pattern, the memo sample must be large enough to show the pattern repeat.

3. Attach a memo sample on the C.O.M./C.O.L. Order Form. Make sure the fabric direction is displayed correctly and indicate the appropriate horizontal or vertical fabric direction.

4. Fill in the fabric mill’s name, the fabric name and fabric colour number.

5. Fill in the dealer’s P.O. #.

6. GLOBALCONTRACT reserves the right to reject a fabric if it is found unacceptable for any reason.

7. Fabric requirements based on 54” width; less than 54” require additional fabric for production.

8. Grading for C.O.M is grade 1 and for C.O.L is grade 1.

9. C.O.L. must be calculated as square footage. To do so, take the yardage listed in the pricelist and multiply by 18.

The association for Contract Textiles has developed the following Performance Guidelines to make fabric specification easier. The 5 symbols give architects, designers and end users a vast amount of performance information in a succinct visual way. This chart lists the required tests that correspond to specific end users. An explanation of the symbol also appears.

FIRE RETARDANCY: Flammability testing determines a fabric’s resistance to burning.

APPLICATION PASSESUpholstery California 117Panels and Upholstered Walls ASTM E 84 (unadhered method)

COLOUR FASTNESS TO WET & DRY CROCKING: refers to the rubbing off of colour from the fabric onto clothing, hands or other materials and can occur under wet or dry conditions.

APPLICATION PASSESUpholstery AATCC 8-1974 Dry Crocking. Class 4 minimum / Wet Crocking, Class 3 minimumPanels and Upholstered Walls ASTM E 84 (unadhered method)

COLOUR FASTNESS TO LIGHT: is the degree to which fabric will retain its colour when exposed to light.

APPLICATION PASSESUpholstery AATCC 16A-1974 or AATCC 16E-1976 / Class 4 minimum of 40 hoursPanels and Upholstered Walls AATCC 16A-1974 or AATCC 16E-1976 / Class 4 minimum of 40 hours

PHYSICAL PROPERTIES: 3 physical property tests include: brush pill test to determine a fabric’s pilling. Breaking/tensile strength is the ability of a fabric to withstand tension without breaking or tearing. Seam slippage is the pulling apart of fabrics at the seams.

APPLICATION PASSESUpholstery Brush pill ASTM D3511, 3-4 minimum Breaking strength ASTM D3597-D1682-64 (1975) 50lbs. minimum in warp & weft Seam Slippage ASTM D3597-D434-75 25lbs. minimum in warp & weftPanels and Upholstered Walls AATCC 16A-1974 or AATCC 16E-1976 / Class 4 minimum of 40 hours

ABRASION: is the ability of a fabric to withstand damage from wear and rubbing. There is a general contract specification aswell as a heavy duty specification.

APPLICATION PASSESGeneral Contract Upholstery ASTM D4157 (#10 cotton ducx) 15,000 double rubs Wyzenbeek MethodHeavy Duty Upholstery ASTM D4966 (with 21 oz. weight) / 40,000 rubs Martindale method

GLOBALCONTRACT PHONE NUMBER 416.739.5000 CUSTOMER SERVICE FAX NUMBER 416.739.7033SALES AND MARKETING PHONE NUMBER 416.650.6500TOLL FREE PHONE NUMBER 1.866.885.1888

SAMPLES Memo samples for Global Contract fabric cards are available for project use through Global Contract. Contact your Global Contract sales representative.

C.O.M. Material Requirements listed throughout the product guide at 54” wide.Note: More yardage may be required depending upon the pattern repeat and if matching is required.

Please Note: If using Global Upholstery fabric, grading remains the same. Please contact your Customer Service Representative.



Blizzard Matrix BMXHPGrey Matrix GRXHPHayden Linen HLNHPStone Linen SLNHPStudio White Matrix SWXHP

GENERAL INFORMATIONFABRICS AND FINISHESPlease choose from the Global Furniture Group choices.Note: Customer’s Own Material (COM) is priced as Grade 1. Customer’s Own Leather (COL) is priced as Grade 1

Sandy Beach VU10Desert Sand VU11Orange Sunset VU12Chocolate Fountain VU13Arctic Blue VU14Quarry Grey VU15Tidal Wave VU16Ivy Moss VU17Red Rose VU18Coal Black VU19White VU20Lime VU21Chartreuse VU23Pool Blue VU26Sky VU28Primary Blue VU32Tangerine VU34

Black BLKHPBlizzard BZDHPStorm (Charcoal) SOGHPDesigner White DWTHPString (Nevada) STGHPCustom Grey (Silver) CGYHPStonedust SDTHPHayden Grey (Taupe) HGTHPBrushed Cobalt (Tungsten) BRCHP

Absolute Acajou ACJHPAsian Night ASNHPAvant Cherry AWCHPAvant Honey AWHHPClear Maple CMBHPDark Espresso DESHPQuartered Mahogany QTMHPShaker Cherry SKCHPTiger Fruitwood TFWHPTiger Maple TMPHPTiger Walnut TWLHPWalnut Heights WHEHPWhite Chocolate WHCHPWinter Cherry WCRHP

Absolute Acajou AAEAsian Night ASEAvant Cherry ACEAvant Honey AHEClear Maple CMEDark Espresso DEEQuartered Mahogany QTMShaker Cherry SKETiger Fruitwood TFETiger Maple TGETiger Walnut TWEWalnut Heights WHEWhite Chocolate CBEWinter Cherry WCE

Black BLKBlizzard BZDBrushed Cobalt BRCCharcoal CHRDesigner White DWENevada NEVSilver SILStonedust SDTTaupe TPE

WalnutWalnut WLWMahogany on Walnut MHWEmpress Walnut EWWCocoa Walnut CAWLatte Walnut LTWNatural Walnut NLWUmber Walnut ULWDark Walnut DWWCherryRed Cherry RCWDark Cherry DCWAmber Cherry ACWWindsor Cherry WCWAlmond Cherry AMWVintage Cherry VNWMapleSugar Maple SMWHazelnut HAWOyster Maple OYWSahara Maple SHWWhite OakBiscotti BTWMocha MCWJava JAWMilestone MTWEvening Oak EVWCoral CRW

Midnight MDNStorm STMDove DVEIvory IVY

Black BLKWhite ($50 list upcharge) WHT

Zooey Side Chair Mesh Colours (Solid)

High Pressure Laminate (HP) - Panel Frame Matches

High Pressure Laminate (HP) - Wood Grain Laminates

PVC Edge Finishes - Wood Grain

PVC Edge Finishes - Panel Frame Matches High Pressure Laminate (HP) - Solids and Patterns

Wood Veneer Finishes

Solar Mesh Colours

Note: WMW White Maple cannot be used on any chair.Note: Custom staining service available, $200 net for match and 5% upcharge per chair.

Note: Leather is a natural product and tends to stretch over time. Global Contract will not warrant puckering on seats and backs due to this material.

Note: Ballara tables and tablets are manufactured in low pressure laminates while Doubleton and Jeo tables and tablets are manufactured in high pressure laminate.

Murano Mesh Colours

Black BLKLPBlizzard BZDLPBrushed Cobalt (Tungsten) BRCLPCustom Grey (Silver) CGYLPDesigner White DWTLPHayden Grey (Taupe) HGTLPStonedust SDTLPStorm (Charcoal) SOGLPString (Nevada) STGLP

Low Pressure Laminates (LP) - Panel Frame Matches

Blizzard Matrix BMXLPGrey Matrix GRXLPHayden Linen HLNLPStone Linen SLNLPStudio White Matrix SWXLP

Low Pressure Laminates (LP) - Solids and Patterns

Absolute Acajou ACJLPAsian Night ASNLPAvant Cherry AWCLPAvant Honey AWHLPClear Maple CMBLPDark Espresso DESLPQuartered Mahogany QTMLPShaker Cherry SKCLPTiger Fruitwood TFWLPTiger Maple TMPLPTiger Walnut TWLLPWalnut Heights WHELPWhite Chocolate WHCLPWinter Cherry WCRLP

Low Pressure Laminates (LP) - Wood Grain Laminates

Prefer Mesh ColoursBlack MBKCharcoal MCHSand MSDStone MSTCitrus MCTPool Blue MPB

H4

V4

H0

V5

H1 H2

P2

F5

V3



OPTIONSGrade 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 221 12 2 23 3 3 34 3 4 4 45 4 4 5 5 56 5 5 5 6 6 67 5 6 6 6 7 7 78 6 6 7 7 7 8 8 89 7 7 7 8 8 8 9 9 910 8 8 8 8 9 9 9 10 10 1011 9 9 9 9 9 10 10 10 11 11 1112 10 10 10 10 10 10 11 11 11 12 12 1213 11 11 11 11 11 11 11 12 12 12 13 13 1314 11 12 12 12 12 12 12 13 13 13 13 14 14 1415 13 13 13 13 13 13 14 14 14 14 14 14 15 15 1516 14 14 14 14 14 14 15 15 15 15 15 15 15 16 16 1617 15 15 15 15 15 15 16 16 16 16 16 16 16 16 17 17 1718 16 16 16 16 16 16 17 17 17 17 17 18 18 18 18 18 18 1819 17 17 17 17 17 17 18 18 18 18 18 19 19 19 19 19 19 19 1920 18 18 18 18 18 18 19 19 19 19 19 20 20 20 20 20 20 20 20 2021 19 19 19 19 19 19 20 20 20 20 20 21 21 21 21 21 21 21 21 22 2122 20 20 20 20 20 20 21 21 21 21 21 22 22 22 22 22 22 22 22 22 22 22

FABRIC GRADE COMBINATION CHARTWhen combining two grades of fabric on one chair use the grade revised in the grid.

ARM OPTIONS



TERMS AND CONDITIONSTerms and ConditionsThis illustrated list price book has been designed to facilitate fast reference and easy use. The line draw-ings match actual products (where possible) to aid in instant recognition of each item, but they are graphic representations only.

Sales of Global Contract’s products are made only on Global Contract’s standard Terms and Conditions of sale which are contained in this list price book. The “Purchaser” in these Terms, Conditions and General Information shall refer to Dealers and those who originally purchase directly from Global Contract for use or re-sale. These standard Terms and Conditions may be modified or supplemented only by a sepa-rately written document signed by Global Contract’s authorized personnel at its head office in Toronto, Ontario, Canada. Any term or condition contained in any purchase order or other form used by the Purchaser to order goods (including standard, printed language) which is different from, in addition to, or in any way inconsistent with Global Contract’s standard Terms and Conditions shall be of no force or effect whatsoever.

All illustrations, specifications and prices in this list price book are based on the latest product informa-tion available at the time of publication. Global Con-tract reserves the right to make changes at any time and without prior notice to prices, colours, materials, specifications and models offered. DescriptionEach product shown or described in this list price book is standard Global Contract product. Available options are noted at the beginning of each series or at the beginning of the price list. Available options may require additional delivery time and cost, and may affect the warranty given. Sizes and weights shown are approximate and are subject to slight changes from time to time.

Prices and PaymentThe prices shown in this Book, as well as those quoted by Global Contract, shall be Canadian dollars for orders shipped to destinations in Canada.

The price does not include any provincial or local property license, privilege, sales, use, value added, gross receipts, G.S.T. or other like taxes which may now or hereafter be applicable to, measured by or imposed upon or with respect to the transaction, the product, its sale, its value or its use, or any services performed in connection therewith.

If shipping date requested is more than 90 days from date of order, Global Contract shall have the right to use published list prices effective at the time of shipment.

Not included in the list price is special or export pack-ing, freight, unpacking and installation. Orders are invoiced at the time of shipment.

Orders are invoiced at the time of shipment. Terms of payment are net 30 days.All orders are subject to the Purchaser complying with Global’s prevailing credit policy.

Any product sold shall remain the property of Global Contract until fully paid for. The Purchaser agrees to perform all acts which may be necessary to perfect and assure retention of title to such products to Global Contract until such time as the goods have been paid for in full.

Delivery shall occur and risk of loss or damage to the product shall pass to Purchaser F.O.B. point of ship-ment. Purchaser is responsible for filing claims with the carrier for losses or damage to the product occur-ring during transit, including concealed damage.

Prices are suggested list prices only and are subject to change without notice. Global Contract will, how-ever, attempt to keep the Purchasers up-to-date on all developments including price changes.

TaxesAll prices shown in this list price book are exclusive of sales, use, excise, HST and other applicable taxes and duties which may be the Purchaser’s responsibility as per the invoice issued by Global. If the Purchaser claims an exemption from such taxes, it shall be the Purchaser’s responsibility to furnish Global with an appropriate exemption certificate at time of order.

Order InformationGlobal Contract requires that all orders be submitted in writing. All orders submitted to Global Contract in writing will be acknowledged on Global Contract’s acknowledgement forms governing the transaction.

The details appearing on this acknowledgement will describe the items to be shipped and the approximate shipping date. It is the Purchaser’s responsibility to determine that the information in the acknowledgment is correct. In the event of an error, the Purchaser must notify their Global Contract Customer Service representative immediately by telephone followed by written confirmation. Shipping dates are assigned to orders based on the items having the longest manu-facturing lead time (unless instructed to partial ship).

Purchaser must indicate if multiple shipping sched-ules are required. Each shipment will be invoiced at time of shipping and will be subject to payment terms described above.

When ordering, please provide the following information: 1. Account number (if possible)2. PO number3. “Bill to” and/or “Ship to” and name and address4. Complete model number and selected options including textiles/finishes5. Special instructions and tag information6. Shipping instructions, please indicate: a. pick up b. Global trailer program c. common carrier, provide name of carrier, your account number7. Special quote (SQ) # (if applicable)8. Customer’s Own Material (COM), Global Contract Purchased Material (GPM), Customer’s Own Leather (COL) - please see below.9. For specials and custom quoted product, please indicate the custom quote # on your PO. If changes

are made to the quote, a new quote must be issued prior to submitting the order. It is the Purchaser’s responsibility to determine that the information on the quote is correct. Global will not be responsible for wrong product due to errors in the quote.

The above points will be checked by Global Contract for accuracy. Global Contract will process orders using the codes provided by the Purchaser. Price discrepancy is the responsibility of the Purchaser. The Purchaser must notify Global Contract prior to invoicing. The Purchaser is responsible for providing correct information when placing an order. If no option(s) are selected the system, will default to standard feature(s). Orders with missing/incorrect information (finish, etc.) will be put on hold until all information is complete. Orders will be scheduled for manufacturing upon receipt of complete information.

Specifications and application drawing may be requested to be supplied for examination prior to approval.

Special ColoursUse of Customer’s Own Material must be approved by Global Contract prior to acceptance of order. Fabric yardage requirement will be advised by factory, and additional yardage may be required if pattern requires matching. If Customers Own Material (C.O.M.) is difficult to apply or if product must be modified, extra charges will be made. Global Contract reserves the right to cancel an order at any time if C.O.M. is inadequate for any reason. Customer’s own material should be shipped freights and duties paid to Global Contract, 565 Petrolia Road, North York, Ontario. Such shipment must be fully identified with purchaser’s order number, Global Contract’s acknowledgment number and the item for which material is intended. For C.O.M. prices, use Grade 1 price. Performance of C.O.M. when applied to product is the sole responsibility of the purchaser.

Deposit on Special OrdersOrders for nonstandard products may, at Global Contract’s discretion, require deposit prior to schedul-ing of production, the amount of the deposit being credited against the total price of the project.

Changes and CancellationAfter the date of Global’s acknowledgment of the Pur-chaser’s order, the order may not be changed or can-celled by the Purchaser without the written consent of Global. Orders for products upholstered in “special order textiles” (GPM) cannot be cancelled once material has been purchased. Special order items, COM and textile-covered items already in production are not subject to change or cancellation under any circumstances. Textile-covered items are considered to be in production once the textile is scheduled for cutting. Other standard items already in production are subject to a minimum 35% cancellation charge.

Global Contract reserves the right to cancel an order at any time if Special Order is in the sole judgement of Global Contract, inadequate for any reason.

Errors and OmissionsAll quotations, acknowledgments and invoices are subject to corrections for any errors and omissions.



DisclaimerPrices shown are current manufacturer’s suggested list prices at the time of printing. Updated pricing is available on Global’s website. All applicable taxes are extra. Descriptions, specifications and prices are sub-ject to change without notice. Errors and omissions are subject to correction.

FinishesSeating Finishes - PaintedWhere painted frames are not a standard colour, a special quote is required. Seating Finishes - Wood StainedOne time charge of $415 net and 5% upcharge per chair per order for custom wood staining/colour matching. Restrictions may apply. The customer must provide a 3” x 3” colour chip/sample. Non-standard finishes must be approved by Global Contract prior to acceptance of order. Custom Wood StainingCustom wood staining procedure for wood seating is as follows. Customer provides a sample of the desired wood finish. That sample is sent to Global Contract Customer Service. Several finished samples will be sent back. The customer/end user will sign off on the samples (keeping one for their records) and return the rest of the samples. Global Contract will not necessarily match the wood species but rather will generate a colour that will coordinate with the sample when it is applied to the wood species used in the seating frame. Metal File FinishesThere is no upcharge on any standard file finish. Any non-standard file finish must be approved by Global Contract prior to acceptance of order and will be sub-ject to a 10% upcharge on orders up to 10 units. There is no upcharge on orders of 11 units or more. An upcharge of 10% will apply to White, Metallic and Mica finishes regardless of the number of units ordered. Wood Veneer FinishesBecause the distinctive characteristics and the nature of wood products cause variations, exact matches are not always possible. Global Contract will not be held responsible if the finishes cannot be matched. Customer’s Own Material (COM)Use of COM must be approved by Global Contract prior to acceptance of order. Please submit the Authorization Request Form. Photocopy and use this form as often as necessary. The customer must provide a 12” x 12” textile sample and advise how the textile is to be applied and quantity of textile being sent. Textile yardage requirement will be advised by the factory, and additional yardage may be required if pattern requires matching. Upon approval from Global Contract, send textile to the COM Department at 565 Petrolia Road, North York, ON, M3J 2X8. If COM is difficult to apply or if product is required to be modified, extra charges will apply. Global Contract reserves the right to cancel an order at any time if COM is inadequate for any reason. COM must be shipped freight and duties paid if applicable to our factory. Such shipment must be fully identified

with the Purchaser’s order number, and the item for which the material is intended. Performance of COM when applied to product is the sole responsibility of the Purchaser. Global Contract’s standard product warranty shall not apply to COM. The COM price is the lowest published price/grade for the series. The published yardage requirement for COM orders is approximate and shown beside each item in the list price book. The yardage shown there is based on the textile requirements for cutting and sewing a single chair in a plain patterned textile. For textiles with a pattern repeat or for COM orders involving 10 or more chairs, please consult with Customer Service for recalculation of the yardage requirements as this may significantly change the textile requirement. Textile GradingAll products are priced according to their standard textile grade. Lower grade textiles may be available but at the same price as standard textile grade. Combining two grades of textiles may result in a revised grade. Please refer to “Fabric Grades Combina-tion Chart” in the Seating list price book. For more than two textiles a special quotation is required. GPM (Global Contract Purchased Material, Customer Specified)Global Contract may purchase material specified by the customer. Use of GPM must be approved by Global Contract prior to acceptance of order. If it is difficult to apply or if product is required to be modified, extra charges will apply. Global Contract reserves the right to cancel an order at any time if GPM is inadequate for any reason. Performance of GPM when applied to product is the sole responsibil-ity of the textile vendor. Global Contract’s standard warranty will not apply to GPM materials. Customer’s Own Leather (COL)Not all seating can be upholstered in leather. Please con-sult series notes for availability. COL price is the lowest published grade for the series (leather or fabric). Upholstery CoveringsSlight variations in colour may occur between dye lots. Although Global Contract attempts to minimize these variances, they do occur and must be accepted as normal and will not be considered defects. Leather is a Natural ProductNatural variations occur in the colour, grain and texture of leather. As a result, a degree of variation should be expected. As leather is used it develops a patina. Its colour changes slightly, it will get marked and it will stretch and pull, these are the hallmarks of genuine leather and are not considered defects. YardageRequired yardage (yd) is based on unmatched materi-als with widths of 54” for seating, 63” for panels. ArmsA wide selection of arms are available for some series. See Arm Chart in the Seating list price book.

Cubic MeasureThe stated cubage is an approximate cubic foot measure to calculate freight costs. The figure shown is the volume for one carton, (one unit per carton

unless otherwise noted) and is subject to change without notice.

DelaysGlobal Contract’s order acknowledgement will state a shipping date which Global Contract best estimate at the time the order is acknowledged. However, Global Contract shall not incur any obligation or liability to Purchaser for failure to ship by specified date unless Global Contract has agreed to an unequivocal, firm shipping date in a separately signed written document executed by its authorized personnel at its head office. In addition, Global Contract shall not be liable for any loss or damage resulting from any delay or failure in shipment or other failure to perform all or any part of the agreement between the parties with respect to the goods shown on the face of the order acknowledg-ments where such delay, failure, loss or damage is the proximate result of any act or any governmental au-thority or political subdivision thereof, revolution, riot, civil disorder or disturbance, act of enemies, delay or default in transportation, strike disputes among or between labour unions or other labour disputes, delay or inability in obtaining materials and facilities, fire, flood, act of God or any cause not within the reason-able control of Global Contract, whether of the class of causes enumerated or otherwise. Without limiting the generality of the foregoing, Global Contract may, without causing breach or incurring liability, allocate goods which are in short supply, irrespective of the reasons therefore, among purchaser, in any manner which Global Contract, in its sole discretion, deems advisable.

SuspensionIn the event that the Purchaser defaults in the pay-ment of any sum due to Global Contract, or in the event the Purchaser’s financial condition becomes unsatisfactory to Global Contract, Global Contract shall have the right to defer or discontinue shipment of any goods until such time as the default is cured or the Purchaser provides assurance of payment to Global Contract.

Combined ShipmentsGlobal Contract will make every effort to combine shipments and orders on written request. However, Global Contract cannot be held responsible where such request is not complied with.

ShipmentsPurchaser must select, at time of order entry, one of two methods of freight payment. Global Contract will make no end-user shipments unless special arrange-ments have been made. 1) F.O.B. point of shipment, freight collect - pick up and common carrier. 2) F.O.B. point of shipment, freight pre-paid and invoiced to purchaser.

The Purchaser will determine the method of trans-portation and routing of shipment. In the event that the purchaser does not specify method and routing, Global Contract will have shipments expedited in the manner deemed appropriate. Contact Customer Service Department, Global Contract Inc., 565 Petrolia Road, North York, Ontario M3J 2X8



(416) 739-5000 with questions concerning shipping information on acknowledged orders.

F.O.B.F.O.B. point is Global Contract’s factory, Toronto, Ontario, Canada.

Back ChargesGlobal Contract will not accept charges for expense incurred by the Purchaser in expediting shipments. Global Contract will not accept charges for the repair of damage by others.

Code RestrictionsGlobal Contract items are within the limitations of local codes.

ServiceService problems are normally handled by the Global Contract`s authorized dealer, as appropriate. Where this cannot be accomplished on a local level, service problems should be referred to Customer Service Department, Global Contract Inc., 565 Petrolia Road, North York, Ontario M3J 2X8, (416) 739-5000, [email protected].

StorageIn the event Purchaser requests postponement of delivery beyond the scheduled shipping date after the goods have become work in progress, or at the time when Global Contract is then about to make shipment, Global Contract may transfer the goods to storage for Purchaser’s account and at Purchaser’s risk and expense. Such transfer to storage shall be deemed delivered to Purchaser for all purposes, including invoicing and payment.

ClaimsAll goods are sold F.O.B. plant. Global Contract is not responsible for damage which occurs in transit or in storage. The carrier signs for all goods received in apparently good order. It is the Purchaser’s respon-sibility to examine goods upon receipt and to file any claims with the carrier for losses or damage to the product occurring during transit, including concealed damage. Any claims made against Global Contract for apparent defects, errors or shortages must be made by the purchaser in writing within 15 working days after any delivery. Failure by the Purchaser to do so shall constitute acceptance of the goods and a waiver of any apparent defects, errors or shortages.

InstallationGlobal Contract requires the use of a certified installer when installing Global Contracts’ prod-ucts and systems so as to avoid any installation misrepresentations and/or unnecessary delivery and installation claims.

“Customer assumes full responsibility for the at-tachment method of work surfaces which were not purchased as part of a complete table assembly. Failure to secure the work surface capable of sup-porting the load capacity listed may result in property damage and/or personal injury. Customer agrees to indemnify and hold harmless Global Upholstery Co. Inc., its affiliates, subsidiaries, officers, directors, em-ployees and shareholders (collectively “Global”) from

and against any lawsuits or threat of lawsuits and all liabilities, direct or implied, claims, proceedings, actions, causes of action, damages, losses, costs and expenses, including, without limitation, legal fees whatsoever which Global may suffer or incur as a result of fulfilling your product order . Customer acknowledges that this product order will not be covered under Global’s Lifetime Warranty.”

ReturnsNo returns of goods will be accepted without written consent and shipping instruction of Global Contract. A restocking charge of 35% based on list pricing is made on all authorized returns for credit or refund, provided goods are received by Global Contract in the condition in which they left the factory. This may increase depending on the type of product. No credit will be given if goods cannot be reused. Global’s Return Goods Authorization (RGA) numbers must appear prominently on all authorized returns. Special order items are in no event subject to return. All returns must be approved and authorized in writing by Global Contract Customer Service. Global reserves the right to refuse delivery of any unauthorized returns.

TolerancesAll dimensions must be limited by a specified tolerance. When not specified it is understood that Global Contract’s normal tolerances and standards shall apply. When purchaser has submitted his own plans and/or specifications, Global Contract will not be responsible for the design and fitting of parts. The conforming of Global Contract products to the specified tolerance is sufficient evidence as to the cor-rectness of the product. Standards of finish, quality and appearance shall, unless specified in writing, be the normal standards of Global Contract.

CopyrightAll catalogues, photographs, drawings, price lists and other printed material are protected by copyright. All rights reserved.

TrademarkMost series names are Global Contract’s trademarks.

DesignMany of the products produced by Global Contract are protected by Design Registrations, Design Patents and/or Patents. Designs and specifications are subject to change, discontinuance or additions without notice.

Offer of SalePossession of this price list or any other literature shall not imply Global Contract’s willingness to sell the holder and shall not be construed as a direct offer of sale. If a conflict arises between: (i) prices found in software support packages furnished to the customer by Global Contract or by any other source on behalf of Global Contract; and (ii) Global-Contract’s current printed price lists, then the most current shall prevail.

Testing QualificationsMany Global products pass or exceed the most strin-gent industry testing standards.

This list price book is effective as of June, 2016. For periodic updates, please check the PDF at www.globalcontract.com. After login, select Re-sources then Price Lists. From here you will have the option to select any of our price lists. Global Contract warrants that all commercial products are free from defects in material and workmanship, for the life of the product, to the original Purchaser.

WARNING - SEATING PRODUCTSTO PREVENT PRODUCT FAILURE AND POSSIBLE INJURY: Ensure that the appropriate selection is made for the intended use of the chair including user’s weight. Some chairs are not recommended for users above a certain weight. Frequently inspect the chair for visible cracks and tighten all screws, bolts and adjustable knobs. If the chair is damaged or unstable, immedi-ately remove it from service. CastersThe list price book specifies the caster which comes standard with each chair model. Most chairs are equipped with hard casters which are best used on carpeted surfaces. If it is intended to use the product on hard surfaces such as ceramics, concrete, lino-leum or hardwood, it is recommended to use different casters. It is the responsibility of the customer to determine the standard caster for a particular product and whether such caster is appropriate for the given application. Any information or suggestions concerning applica-tions, specifications or compliances with codes and standards is provided solely for your convenient refer-ence and without any representation as to accuracy or suitability. Global disclaims any legal responsibility. The user must verify and test the suitability of any information or products for his specific application. Global reserves the right to change the Terms and Conditions in the list price book without notice.



LIFETIME WARRANTYGlobal Contract warrants that all commercial products are free from defects in material and workmanship, for the life of the product, to the original Purchaser. Global Contract will repair or replace, at Global Contract’s option, as the sole remedy for any defect covered by the warranty. The warranty applies to products manufactured after June 1, 2016.

This Lifetime Warranty is NOT applicable to custom-ers who use Global Contract products for rental pur-poses, product installed by non-certified installer and is effective only for products, parts or components manufactured after August 1, 1998.

General Commercial SeatingGlobal’s warranty for general commercial seating covers all chair components including pneumatic cylinders, bases, casters, glides, frames, arms, plastic seats, backs and other structural components. Exceptions to the warranty for general commercial seating are as follows: • Foam, textiles (as sampled on Global Contract branded and textile program cards), mesh material and electrical devices, are warranted for five (5) years • Control mechanisms are warranted for twelve (12) years The warranty applies to single shift, standard com-mercial usage, defined as a standard eight (8) hour day, forty (40) hour week for users weighing up to 300 lbs. TextilesGlobal Contract warrants Global Contract branded textiles and Global Contract carded textile programs inclusive of fabrics, vinyls and leather products for five (5) years. Global does not warrant COM (Customer’s Own Material) or GPM (Global Contract Purchased Material) that are customer specified ma-terials, or graded-in and purchased by Global Contract for a customer. For GPM or COM products, please contact the textile supplier for performance informa-tion and warranty details. Please refer to our website at www.globalcontract.com for detailed information on cleaning and care instructions. Improper usage of disinfecting/cleaning products may void the warranty. Seating Warranty Summary Seating Type - General Commercial Seating Components Warranty For Original Purchaser - life-time Use Time For Warranty Coverage - 8 hours/5 days per weekExceptionsFoam/textiles/mesh/electrical devices - 5 yearscontrol mechanisms - 10 years Files, Desks, Modular Furniture, Tables, Panels & AccessoriesGlobal Contract warrants all components of metal storage and filing, laminate and wood veneer sur-faces, laminate and wood veneer tables, metal leg components and panels for the lifetime of the product to the original Purchaser.

Exceptions to the warranty for files/desks/tables and panels are as follows: • Electrical devices, panel and tackboard textiles, adjustable keyboard mechanisms and task lights - five (5) years • motorized electrical components - two (2) years • Folding tables - one (1) year Files, Desks, Modular Furniture, Tables, Panels & Accessories Warranty Summary Product Type

Metal Storage & Filing - Lifetime Warranty No exceptions. Laminate/Wood Veneer Surfaces and Modular Furni-ture - Lifetime WarrantyExceptions: tackboard textiles, electrical devices, task lights - 5 years

Boardroom, Conference and Training Tables - Lifetime WarrantyExceptions: electrical devices - 5 years

Panels - Lifetime Warranty Exceptions: panel textiles, electrical devices, task lights - 5 years Folding Tables - 1 Year Warranty

Global’s warranty does not apply (for any product category) to the following: • Nominal or normal amount of wear and tear that can occur over time • Failures which result from negligence, abuse, accident or misuse • Failure to apply, install or maintain products according to Global Contract’s written instruc tions and warnings • Modifications, attachments or repair methods not approved by Global • Damage caused by a carrier in transit, or delivery/installation contractors • The matching of colours, grains or textures (wood, leather, etc.) of natural materials • Products exposed to extreme hot or cold tem peratures or excessively dry or humid environments • Colour fastness or the matching of colour of textiles, dye lots of textile can vary • Damage by markings or staining; damage by sharp objects or imprinting from instruments • Damage to textiles or laminate and wood surfaces/edges from exposure to sunlight (including UV rays) • Products used for rental purposes • Products installed by a non-certified installer • Purchased parts are warranted for one (1) year • Failure to follow specific cleaning and care instructions posted on www.globacontract.com Global Contract’s warranty does not cover the costs of

transportation or labour. Repair or replacement will be at Global Contract’s discretion.

Non-obsolescence PolicyAll Global Contract products are designed and manufactured to withstand repeated service, repair and handling, and carry a lifetime warrantee. Global Contract`s goal is to ensure that products can be refurbished, disassembled or upgraded as required. In addition, standardization of many parts and components facilitate ease of maintenance, servicing, assembly, and reconfiguration or reassembly.Global Contract will provide Purchaser with product(s) of comparable function for a term equal to the warranty period. Fabrics and finishes are updated periodically to meet the growing demand of the market. As a result, some fabrics and finishes may be discontinued before expiration of the warrantee period. Global Contract makes no warranty that any of its products are suitable for any particular purpose and makes no other warranties, express or implied, other than those set out here. As codes and standards vary from one jurisdiction to another, references to compliance are solely for convenience and without any representation as to accuracy or suitability. Users must verify the suitability of such information or product for their specific application. In no event shall Global Contract be liable in either tort or contract for any loss or direct, special, incidental, consequen-tial, or exemplary damages.

LIFETIME WARRANTY

GRADE PRICE GRADE PRICE1 764 11 1035 C.O.M YDG 0.752 785 12 1092 HEIGHT ” 473 801 13 1148 WIDTH ” 28.54 820 14 1203 DEPTH ” 28.55 853 15 1327 WEIGHT lbs 386 880 16 1451 VOLUME ft3 237 908 17 15758 935 18 16999 965 19 182410 994 20 1960

PRICE408

HEIGHT ” 32.5WIDTH ” 18.5DEPTH ” 21.5WEIGHT lbs 11VOLUME ft3 12

PRICE469

HEIGHT ” 32.5WIDTH ” 22DEPTH ” 21.5WEIGHT lbs 12VOLUME ft3 12

PRICE408




TASK SEATING

Murano • 8290M • High Back Synchro TilterHigh Back Synchro Tilter (height and width adjustable T-arm) synchro mechanism with seat slider, infinate back lock control, tilt angle ad-justment, two piece seat and back, mesh back, pneumatic height adjustment, and tilt tension control. Black frame only.

Optional Lumbar Support (At time of order)

• Optional L, lumbar support available on Synchro-Tilt, please add $62.00 list. This item cannot be retrofit on site, a new back must be ordered.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.• Optional glides are available.• WHT White mesh available at an upcharge of $56 list.

• Murano seating offers design with flare for today’s workplace. The versatile look of Murano includes breathable mesh back with black polypropylene frame to protect it from everyday wear and tear. Standard features include high back synchro tilter, synchro mechanism with seat slider, infinite back lock control, pneumatic height adjustment and tilt tension control. Options include adjustable lumbar support and polished aluminium base and arms.• Synchro-Tilt has V5 arms as standard. No other arm option available. • Synchro -Tilt has HC, hard casters for carpet surfaces as standard, for SC, soft casters for hard floors please add $27.00 list, for HG, hard glides please add $40.00 list.• Synchro -Tilt has SB, black five legged injection molded base is standard, for PA, polished aluminum and TUN tungsten base only please add $90.00 list and for PA, polished aluminum and TUN Tungsten base and arms please add $146.00 list.• Side chair has BLK, Black or TUN Tungsten frame, for CHR, Chrome base only please add $50.00 list .• Synchro -Tilt and side chair product is FA, fully assembled, it is available as KD, knocked down, please add $18.00 list.

Murano

Murano • 8291P N1 • Mid Back Side ChairMid Back Side Chair four legged frame, plastic back and seat, armless, black casters.

Murano • 8291P • Mid Back Arm ChairMid Back Arm Chair four legged frame plastic back and seat, plastic arm rest, black casters.

Murano • 8291PG N1 • Mid Back Side ChairMid Back Side Chair four legged frame, plastic back and seat, armless, with glides.

PRICE469

HEIGHT ” 32.5WIDTH ” 22DEPTH ” 21.5WEIGHT lbs 12VOLUME ft3 16

PRICE534

HEIGHT ” 31.5WIDTH ” 22DEPTH ” 20WEIGHT lbs 18VOLUME ft3 16

PRICE469

HEIGHT ” 31.5WIDTH ” 18.5DEPTH ” 20WEIGHT lbs 17VOLUME ft3 12

GRADE PRICE GRADE PRICE1 471 11 743 C.O.M YDG 0.752 492 12 800 HEIGHT ” 32.53 509 13 856 WIDTH ” 224 529 14 910 DEPTH ” 21.55 560 15 1036 WEIGHT lbs 126 588 16 1159 VOLUME ft3 167 617 17 12838 644 18 14089 673 19 153110 702 20 1668

GRADE PRICE GRADE PRICE1 408 11 678 C.O.M YDG 0.752 428 12 735 HEIGHT ” 32.53 444 13 791 WIDTH ” 18.54 464 14 846 DEPTH ” 21.55 495 15 971 WEIGHT lbs 116 524 16 1094 VOLUME ft3 167 552 17 12198 579 18 13439 608 19 146710 638 20 1603

GRADE PRICE GRADE PRICE1 447 11 719 C.O.M YDG 0.752 468 12 776 HEIGHT ” 32.53 485 13 832 WIDTH ” 18.54 505 14 886 DEPTH ” 21.55 536 15 1012 WEIGHT lbs 116 564 16 1134 VOLUME ft3 127 593 17 12598 620 18 13849 648 19 150710 678 20 1644



TASK SEATINGMurano • 8291PG • Mid Back Side Chair

Mid Back Arm Chair four legged frame plastic back and seat, plastic arm rest, with glides

Murano • 8292P N1 • Mid Back Side ChairMid Back Side Chair cantilever frame, plastic back and seat, armless, black glides.

Murano • 8292P • Mid Back Arm ChairMid Back Arm Chair cantillever frame, plastic back and seat, plastic arm rest, black glides.

Murano • 8291M N1 • Mid Back Side ChairMid Back Side Chair four legged frame, mesh back and upholstered seat, armless black casters.

Murano • 8291M • Mid Back Arm ChairMid Back Arm Chair four legged frame, mesh back and upholstered seat, plastic arm rest, black casters.

Murano • 8291MG N1 • Mid Back Side ChairMid Back Side Chair four legged frame, mesh back and upholstered seat, armless, with glides.

• September 2019 rev: October 2019

GRADE PRICE GRADE PRICE1 471 11 743 C.O.M YDG 0.752 492 12 800 HEIGHT ” 32.53 509 13 856 WIDTH ” 224 529 14 910 DEPTH ” 21.55 560 15 1077 WEIGHT lbs 126 588 16 1199 VOLUME ft3 167 617 17 13248 644 18 14499 673 19 157210 702 20 1709

GRADE PRICE GRADE PRICE1 471 11 743 C.O.M YDG 0.752 492 12 800 HEIGHT ” 31.53 509 13 856 WIDTH ” 18.54 529 14 910 DEPTH ” 205 560 15 1036 WEIGHT lbs 176 588 16 1159 VOLUME ft3 127 617 17 12838 644 18 14089 673 19 153110 702 20 1668

GRADE PRICE GRADE PRICE1 537 11 809 C.O.M YDG 0.752 558 12 864 HEIGHT ” 31.53 574 13 921 WIDTH ” 224 594 14 975 DEPTH ” 205 625 15 1101 WEIGHT lbs 186 653 16 1224 VOLUME ft3 167 681 17 13488 709 18 14739 737 19 159610 768 20 1734

GRADE PRICE GRADE PRICE1 460 11 820 C.O.M YDG 12 487 12 897 HEIGHT ” 32.53 509 13 970 WIDTH ” 18.54 536 14 1044 DEPTH ” 21.55 576 15 1211 WEIGHT lbs 116 615 16 1374 VOLUME ft3 167 653 17 15428 688 18 17079 727 19 187210 768 20 2032

GRADE PRICE GRADE PRICE1 525 11 885 C.O.M YDG 12 552 12 962 HEIGHT ” 32.53 574 13 1035 WIDTH ” 224 601 14 1109 DEPTH ” 21.55 642 15 1276 WEIGHT lbs 126 679 16 1440 VOLUME ft3 167 718 17 16078 753 18 17729 792 19 193710 833 20 2097



TASK SEATINGMurano • 8291MG • Mid back Side Chair

Mid Back Arm Chair four legged frame, mesh back and upholstered seat, plastic arm rest,with glides.

Murano • 8292M N1 • Mid Back Side ChairMid Back Side Chair cantiliver frame, mesh back and upholstered seat, armless, black glides.

Murano • 8292M • Mid Back Arm Chair Mid Back Arm Chair cantiliver frame, mesh back and upholstered, plastic arm rest, black glides.

Murano • 8291U N1 • Mid Back Side ChairMid Back Side Chair four legged frame, uphol-stered back and upholstered seat, armless black casters.

Murano • 8291U • Mid Back Arm ChairMid Back Arm Chair four legged frame, uphol-stered back and upholstered seat, plastic arm rest, black casters.



GRADE PRICE GRADE PRICE1 525 11 885 C.O.M YDG 12 552 12 962 HEIGHT ” 31.53 574 13 1035 WIDTH ” 18.54 601 14 1109 DEPTH ” 205 642 15 1276 WEIGHT lbs 176 679 16 1440 VOLUME ft3 127 718 17 16078 753 18 17729 792 19 193710 833 20 2120

GRADE PRICE GRADE PRICE1 589 11 950 C.O.M YDG 12 617 12 1026 HEIGHT ” 31.53 639 13 1100 WIDTH ” 224 666 14 1174 DEPTH ” 205 707 15 1341 WEIGHT lbs 186 744 16 1505 VOLUME ft3 167 783 17 16728 817 18 18369 857 19 200110 898 20 2184



TASK SEATING

Murano • 8291UG • Mid back Side ChairMid Back Arm Chair four legged frame, uphol-stered back and upholstered seat, plastic arm rest, with glides.

Murano • 8291UG N1 • Mid Back Side ChairMid Back Side Chair four legged frame, uphol-stered back and upholstered seat, armless, with glides.

Murano • 8292U N1 • Mid Back Side ChairMid Back Side Chair cantiliver frame, uphol-stered back and upholstered seat, armless, black glides.

Murano • 8292U • Mid Back Arm Chair Mid Back Arm Chair cantiliver frame, uphol-stered back and upholstered, plastic arm rest, black glides.

GRADE PRICE GRADE PRICE1 850 11 1096 C.O.M YDG 0.752 869 12 1147 HEIGHT ” 363 884 13 1197 WIDTH ” 23.254 902 14 1248 DEPTH ” 255 930 15 1361 WEIGHT lbs 296 956 16 1473 VOLUME ft3 97 982 17 15868 1005 18 16999 1032 19 181110 1060 20 1935






TASK SEATING

Prefer • 8458 • Multi-Task ChairMulti-Task Chair with upholstered seat and mesh back. Asphalt Black frame and fixed arms.

• The preferred ergonomic seating solution for meeting, conference and reception areas. The integrated mechanism enables a movement by 5 degrees forward and 12 degrees backwards . The only control is a discreet pneumatic seat height adjustment.

• The sleek lightweight reinforced polymer frame is available in either Asphalt (APT) or Alabaster (ABR)

• Polished aluminum arms available at an upcharge $120 list• Polished aluminum base available at an upcharge $140 list. For Alabaster (ABR) base on

the Asphalt frame, please add $29 list• Prefer has HC, hard casters for carpet surfaces as standard. For SC, soft casters for hard

floors, please add $26 list. For HG, hard glides please add $38 list.• Mesh colours available in MBK, Black, MCH, Charcoal, MSD, Sand, MST, Stone, MCT,

Citrus, MPB, Pool Blue.

Prefer

Prefer • 8458S • Drafting StoolDrafting Stool with upholstered seat and mesh back. Asphalt Black frame and fixed arms.

Prefer • 8458NA • Multi-Task Chair

Prefer • 8458NAS • Drafting Stool

Multi-Task Chair with upholstered seat and mesh back. Asphalt Black frame, no arms.

Drafting Stool with upholstered seat and mesh back. Asphalt Black frame, no arms.







TASK SEATINGPrefer • 8459 • Multi-Task Chair

Prefer • 8459S • Drafting Stool

Multi-Task Chair with upholstered seat and mesh back. Alabaster frame and fixed arms.

Drafting Stool with upholstered seat and mesh back. Alabaster frame and fixed arms.

Prefer • 8459NA • Multi-Task Chair

Prefer • 8459NAS • Drafting Stool

Multi-Task Chair with upholstered seat and mesh back. Alabaster frame, no arms.

Drafting Stool with upholstered seat and mesh back. Alabaster frame, no arms.

GRADE PRICE GRADE PRICE1 856 11 1578 C.O.M YDG 22 910 12 1728 HEIGHT ” 50.53 954 13 1876 WIDTH ” 23.54 1009 14 2024 DEPTH ” 23.55 1089 15 2358 WEIGHT lbs 446 1166 16 2687 VOLUME ft3 21.57 1242 17 30208 1313 18 33529 1390 19 368010 1472 20 4047

GRADE PRICE GRADE PRICE1 817 11 1361 C.O.M YDG 1.752 859 12 1473 HEIGHT ” 41.53 894 13 1583 WIDTH ” 23.54 932 14 1695 DEPTH ” 23..55 993 15 1945 WEIGHT lbs 446 1051 16 2191 VOLUME ft3 177 1108 17 24418 1160 18 26909 1219 19 293710 1280 20 3212




Priority • 8490 • High Back Knee-Tilter High Back Knee-Tilter (Metal Arm Support) up-holstered wood shell, knee tilt and sidetension adjustment, lumbar support and wrap around arm support, upholstered seat and back.

TUN, tungsten base please add $90.00 list and for PAA, polished aluminum base and arms please add $146.00 list. • In addition to the above, the side chair is also available in CH, chrome or TUN, Tungsten base, please add $90.00 list and for CH, chrome base and arms please add $146.00 list..• Knee -Tilt product is FA, fully assembled, it is available as KD, knocked down, please add $18.00 list. • Side chair is FA, fully assembled, not available as KD, knocked down.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

• Priority has a slim, sleek profile that incorporates a compression-moulded wood back that follows and supports the ergonomic contours of the spine. High- back and mid- back models can be upholstered in leather, fabric or in combination. The knee-tilt mechanism features a user-friendly side tension adjustment for convenience and comfort. Priority is well suited for use in private offices, meeting and conference rooms.• Knee -Tilt has HC, hard casters for carpet surfaces as standard, for SC, soft casters for hard floors please add $27.00 list, for HG, hard glides please add $40.00 list.• Knee -Tilt has SB, black five legged injection molded base is standard, for PA, polished aluminum or

Priority

Priority • 8491 • Mid Back Knee-Tilter Mid Back KneeTilter (Metal Arm Support) up-holstered wood shell, knee tilt and side tension adjustment, lumbar support and arm support, upholstered seat and back.

TASK SEATING

Priority • 8492 • Side Chair Side Chair (Metal Arm Support) upholstered wood shell on cantilevered base, upholstered seat and back.



GRADE PRICE GRADE PRICE1 727 11 1271 C.O.M YDG 1.52 769 12 1383 HEIGHT ” 383 802 13 1494 WIDTH ” 204 842 14 1604 DEPTH ” 285 903 15 1854 WEIGHT lbs 406 962 16 2101 VOLUME ft3 177 1017 17 23528 1070 18 26009 1129 19 284710 1190 20 3122




TASK SEATINGProietto

• Synchro-Tilt and Multi-Tilt have SB, black five legged injection molded base as standard, for PA, polished aluminum base please add $146.00 list.• Side chair has BLK, Black frame, for CH, chrome base only please add $50.00 list.• Synchro-Tilt, Swivel-Tilt and Multi-Tilt product is FA, fully assembled, it is available as KD, knocked down, please add $18.00 list. • Side chair is FA, fully assembled, not available as KD, knocked down.• Optional SS, seat slider available on Multi-Tilt, please add $86.00 list.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section on page 5.

• Developed by Global Contract, the Proietto series of chairs provide exceptional comfort and ergonomic features. Fully upholstered line of elegantly designed task and side chairs, with sleek Italian mechanisms and distinctive top-stitching. Designed to meet CGSB National Standard. Finish options; Black standard, upcharge for Polished Chrome.• Synchro-Tilt and Multi-Tilt have H0 arms as standard. Swivel-Tilt and Multi-Tilt can have H1,

H2, H4, V3. V4 arms. Upcharge for H1 is $32, H2 is -$5, H4 is $74, V3 is $58 and V4 is $117.• Side chair comes standard with F5 arms. • Synchro-Tilt and Multi-Tilt have HC, hard casters for carpet surfaces as standard, for SC, soft casters for hard floors please add $27.00 list, for HG, hard glides please add $40.00 list.

Proietto • 8601-1 • High Back High Back Synchro Tilter, H0 arms with ratchet back height adjustment and sleek Italian synchro mechanism. Fully upholstered with distinctive top-stitching. Black frame standard.

Proietto • 8601-3 • High Back High Back Multi-Tilt, H0 arms, with ratchet back height adjustment and multi-tilt control mechanism. Fully upholstered with distinctive top-stitching. Black frame standard.

Proietto • 8602-1 • Mid Back Mid Back Synchro Tilter, H0 arms, with ratchet back height adjustment and sleek Italian synchro mechanism. Fully upholstered with distinctive top-stitching. Black frame standard.

Proietto • 8602-3 • Mid Back Mid Back Multi-Tilt, H0 arms, with ratchet back height adjustment and multi-tilt control mechanism. Fully upholstered with distinctive top-stitching. Black frame standard.



PRICE810 C.O.M YDG -

HEIGHT ” 36WIDTH ” 23.25DEPTH ” 25WEIGHT lbs 24VOLUME ft3 9



PRICE936




TASK SEATINGProietto • 8606N1 • Armless Side Chair

Side Chair, sled base. Fully upholstered with top-stitching.

Proietto • 8606 • Side Chair Side Chair, F5 arms, sled base. Fully uphol-stered with top-stitching.

Solar - 8456 - Mid Back Mesh Chair Asphalt Base & Frame

Solar

Solar - 8457 - Mid Back Mesh Chair Alabaster Base & Frame

Solar - 8456S - Mid Back Mesh Stool, Asphalt Base & Frame

A sophisticated and versatile seating solution for conference and collaborative en-vironments. The mesh seat and back cradle the sitter in comfort. The lightweight one piece reinforced polymer frame has an integrated 10 degree tilt mechanism. The only adjustment is a discreet pneumatic height adjustment.

• Polished aluminum base available at an upcharge $147.00 list• To have Alabaster (ABR) base on the Asphalt (APT) frame, please add $30.00 list• Solar has HC, hard casters for carpet surfaces as standard, for SC, soft casters

for hard floors, please add $27.00 list, for HG, hard glides, please add $40 list

Available in (MDN) Midnight, (STM) Storm, (DVE) Dove, (IVY) Ivory

• Shipped KD


• Shipped KD


• Shipped KD

PRICE1019






PRICE968


PRICE889




TASK SEATINGSolar - 8457S - Mid Back Mesh Stool Alabaster Base & Frame


• Shipped KD

Solar - 8456NA - Mid Back Mesh Chair, No Arms Asphalt Base & Frame

Solar - 8457NA - Mid Back Mesh Chair, No Arms Alabaster Base & Frame


• Shipped KD


• Shipped KD

Solar - 8457SNA - Mid Back Mesh Stool, No Arms, Alabaster Base & Frame

Solar - 8456SNA - Mid Back Mesh Stool, No Arms, Asphalt Base & Frame


• Shipped KD


• Shipped KD




GRADE PRICE GRADE PRICE1 994 11 1357 C.O.M YDG 12 1022 12 1431 HEIGHT ” 333 1044 13 1505 WIDTH ” 22.54 1071 14 1579 DEPTH ” 24.55 1111 15 1745 WEIGHT lbs 206 1150 16 1911 VOLUME ft3 167 1188 17 20778 1222 18 22439 1262 19 240710 1302 20 2589



GUEST SEATING• Jackson offers classic styling and value in a finely crafted transitional side chair.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

Jackson • 8335 • Wood Side Chair

Jackson

Wood Side Chair with upholstered back and seat.

Jackson • 8336 • Wood Side ChairWood Side Chair with slat back and upholstered seat.

London • 8531 • Wood Side ChairWood Side Chair with fully upholstered back and seat.

• Classic styling and value in a finely crafted transitional side chair. Made from solid beech with molded veneer arms. Available in any Global Contract wood finish.• Model #8531 is not available in leather/mock leather or vinyl, for details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

London

London • 8532 • Wood Side ChairWood Side Chair with fully upholstered picture frame back and seat.








GUEST SEATINGLondon • 8535 • Wood Side Chair

Wood Side Chair with upholstered back and seat.

London • 8536 • Wood Side ChairWood Side Chair with slat back and upholstered seat.

Marché • 8621 • Open Wood Back Side Chair

Marché

Curved open wood back side chair with four legs and upholstered seat.

• Marché comes standard with BLK, black legs, for TUN, tungsten please add $30.00 list and for CH, chrome or BCH, brushed chrome, please add $50.00 list.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

• Italian designed curved plywood chairs with Chrome, Black, Tungsten or Brushed Chrome legs and upholstered seat. Wood finishes: Descor standard wood finishes.

Marché • 8621S30 • Open Wood Back Stool, 30”, Bar HeightCurved open wood back stool with four legs and upholstered seat.

Marché • 8621S26 • Open Wood Back Stool, 26”, Counter HeightCurved open wood back stool with four legs and upholstered seat.








GUEST SEATINGMarché • 8622 • Full Wood Back Upholstered Side Chair

Curved full wood back upholstered side chair with four legs and upholstered seat.

Marché • 8622S26 • Full Wood Back Upholstered Stool, 26”, Counter HeightCurved full wood back upholstered back stool with four legs and upholstered seat.

Marché • 8622S30 • Full Wood Back Upholstered Stool, 30”, Bar HeightCurved full wood back upholstered stool with four legs and upholstered seat.

Marché • 8624 • Full Wood Back Side ChairCurved full wood back side chair with four legs and upholstered seat.

Marché • 8624S26 • Full Wood Back Stool, 26”, Counter HeightCurved full wood back stool with four legs and upholstered seat.


PRICE307

HEIGHT ” 34.75WIDTH ” 21DEPTH ” 22WEIGHT lbs 12VOLUME ft3 12


PRICE456

HEIGHT ” 39WIDTH ” 21DEPTH ” 22WEIGHT lbs 12VOLUME ft3 16




GUEST SEATINGMarché • 8624S30 • Full Wood Back Stool, 30”, Bar Height

Curved full wood back stool with four legs and upholstered seat.

Sas • 8647 • Mid Back Side Chair

Sas

Mid Back Side Chair, four legged without arms, laminate wood veneer single shell seat and back.

• The following back styles are available : A – diamond shape or B – straight back• Please specify back style for both chairs & stools.

• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

• Dotted line shows low back profile.

• The Sas side chair and bar stool with laminated wood veneer single shell seat and back are perfect for waiting rooms, training rooms, cafeterias, restaurants and schools. Seat and back shell can be finished in some Global Contract Descor wood finish and WHM - Solid White or BKH Solid Black. See Fabrics & Finishes page. Two back styles are available as shown. The side chair and bar stool stack up to four high.

• Sas offer 2 seat options, P, upholstered seat and non-upholstered seat. • Frames available in E, ebony/black or DWT, Designer White. For TUN, tungsten

please add $30.00 list and for C, chrome, please add $65.00 list.

A - Diamond B - Straight

Sas • 8647P • Mid Back Side ChairMid Back Side Chair, (upholstered seat pad) four legged without arms, laminate wood veneer single shell seat and back.

Sas • 8648S24 • Mid Back Bar Stool, 24”, Counter HeightBar Stool, four legged without arms, laminate wood veneer single shell seat and back.

Sas • 8648PS24 • Mid Back Bar Stool, 24”, Upolstered Seat, Counter HeightBar Stool, (upholstered seat pad) four legged without arms, laminate wood veneer single shell seat and back.


PRICE456


PRICE456





PRICE456




GUEST SEATINGSas • 8648S30• Mid Back Bar Stool, 30”, Bar Height

Bar Stool, four legged without arms, laminate wood veneer single shell seat and back.

Sas • 8648LBNS30 • Low Back Bar Stool, 30”, Bar Height

Sas • 8648LBPS30 • Low Back Bar Stool, 30”, Upholstered Seat, Bar Height

Bar Stool, four legged without arms, laminate wood veneer single shell seat and back.• Low back stools are not available in A - Dia-

mond Shape back style.

Bar Stool, (upholstered seat pad) four legged without arms, laminate wood veneer single shell seat and back.• Low back stools are not available in A - Dia-


Sas • 8648LBPS24 • Low Back Bar Stool, 24”, Upholstered Seat, Counter HeightBar Stool, (upholstered seat pad) four legged without arms, laminate wood veneer single shell seat and back.• Low back stools are not available in A - Dia-


Sas • 8648PS30 • Mid Back Bar Stool, 30”, Upholstered Seat, Bar HeightBar Stool, (upholstered seat pad) four legged without arms, laminate wood veneer single shell seat and back.

Sas • 8648LBNS24 • Low Back Bar Stool, 24”, Counter HeightBar Stool, four legged without arms, laminate wood veneer single shell seat and back.• Low back stools are not available in A - Dia-


PRICE285




GRADE PRICE GRADE PRICE1 1139 11 1500 C.O.M YDG 12 1167 12 1575 HEIGHT ” 333 1189 13 1650 WIDTH ” 22.54 1216 14 1723 DEPTH ” 235 1256 15 1891 WEIGHT lbs 206 1295 16 2055 VOLUME ft3 177 1332 17 22228 1367 18 23879 1407 19 255210 1448 20 2734




GUEST SEATINGSas • 8649 • Dolly

• Dolly• Available in Black (BLK) or White (DWT). For

Tungsten (TUN), please add $28.• Not available in chrome.• Stacks up to 10 chairs.

Wellington• Model# 8521 is not available in leather/mock leather or vinyl. For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

• Wellington offers classic styling and value in a finely crafted transitional side chair. Made from solid beech.

Wellington • 8520 • Side ChairSide Chair (Armless) with upholstered back and seat.

Wellington • 8521 • Side ChairSide Chair with fully upholstered back and seat.

Wellington • 8522 • Side ChairSide Chair with upholstered picture frame back and seat.

Wellington • 8525 • Side ChairSide Chair with upholstered back and seat.






GUEST SEATINGWellington • 8526 • Side Chair

Side Chair with slat back and upholstered seat.

Zooey • Zooey chair is FA, fully assembled, not available as KD, knocked down.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.• For a wide variety of mesh colours please see Fabrics and Finishes page.

• This high performance affordable skeletal chair simplifies task seating. High quality components and soft curved lines offer adjustability and support.• Side chair has BLK, Black frame, for TUN, tungsten base please add $30.00 list.

Zooey • 8585 • Side Chair Side Chair with upholstered seat and mesh back.

Ballara$282 for model #9768 and $201 for model #9767.

• Power module can be mounted under any seat or table.• All metal components are standard in BLK, black, DWT, Designer White or TUN, Tungsten.

For CH, chrome or BCH, brushed chome, please add $146.00 list for single chairs and stools, $194.00 list for double loveseats, $232.00 list for sofas, $72.00 list for Middle, Left or Right Tablets, $8.00 list for Power Module and $146.00 list for all tables.

• Quilted seat can be applied to any Ballara seating unit. • Each cushion is stitched to show a 4x4 square grid pattern. • Creates a more finely tailored piece of furniture. • Upcharge is 110$ list for a single seater, $221 list for all two seaters and $331 for all three seaters. • Please add a “Q” at the end of the product Code.

• Ballara is an all inclusive, modular furniture series which includes seating, storage, power and worksurfaces. It satisfies many space planning scenarios including corner, in-line, open concept as well as traditional reception.

• Furniture pieces can be used as stand alone items and can be linked together to form infinite seating configurations.

• Tablets can be mounted outside or between seats to accommodate various work and collaborative settings.

• Each tablet comes with a 2 point locking mechanism for easy handling and stabil-ity.

• Tablets are available in W, wood finish, please add $36.00 list• Corner and storage tables can also be combined with seating to create more interesting

configurations.• Tables are available in W, wood finish, please add $634.00 list for model #9754,

$406.00 list for model #9755, $1268.00 for model #9765, $814 for model #9766,

Ballara • 9751 • ArmchairFully upholstered armchair with metal base Ballara Left or Right Tablet can be mounted on respective sides. Ballara power module can be mounted under seat.• For multiple C.O.M.:

- back 1.25 yrds - seat 1.25 yrds - arms 2.5 yrds





GRADE PRICE GRADE PRICE1 2240 11 4406 C.O.M YDG 62 2406 12 4857 HEIGHT ” 303 2538 13 5301 WIDTH ” 564 2697 14 5747 DEPTH ” 29.55 2940 15 6746 WEIGHT lbs 996 3170 16 7733 VOLUME ft3 507 3399 17 87338 3608 18 97269 3843 19 1071310 4087 20 11810




LOUNGE SEATINGBallara • 9751L • Chair with Left Arm

Fully upholstered lounge chair with left arm and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:

- back 1.25 yrds - seat 1.25 yrds - arm 1.25 yrds

Ballara • 9751R • Chair with Right Arm

Ballara • 9751NA • Armless Chair

Fully upholstered lounge chair with right arm and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat. • For multiple C.O.M.:

- back 1.25 yrds - seat 1.25 yrds - arm 1.25 yrds

Fully upholstered armless lounge chair with metal base. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat. • For multiple C.O.M.:

- back 1.25 yrds - seat 1.25 yrds

Ballara • 9752 • Loveseat with ArmsFully upholstered loveseat with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara power module can be mounted under seat. • For multiple C.O.M.:

- back 2.5 yrds - seats 2.5 yrds - arms 2.5 yrds

Ballara • 9752L • Loveseat with Left ArmFully upholstered loveseat with left arm and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat. • For multiple C.O.M.:

- back 2.5 yrds - seats 2.5 yrds - arm 1.25 yrds







LOUNGE SEATINGBallara • 9752R • Loveseat with Right Arm

Fully upholstered loveseat with right arm and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Ballara • 9752NA • Armless Loveseat

Ballara • 9752NAHB42 • 42” High Back Armless Loveseat

Fully upholstered armless loveseat with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:

- back 2.5 yrds - seats 2.5 yrds

Fully upholstered high back armless loveseat with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat. • For multiple C.O.M.:


• For optional table shelf, please add “TB” to the end of the code and add $662 list to the price.

• Table shelf height is 36”.• Table shelf is low pressure laminate.• Table shelf is 8” deep.

Ballara • 9752NAHB48 • 48” High Back Armless LoveseatFully upholstered high back armless loveseat with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat. • For multiple C.O.M.:











LOUNGE SEATINGBallara • 9752-OB • Loveseat with Arms / Open Back

Ballara • 9752L-OB • Loveseat with Left Arm / Open Back

Fully upholstered loveseat with open back and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Fully upholstered loveseat with left arm, open back and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Ballara • 9752R-OB • Loveseat with Right Arm / Open Back

Ballara • 9752NA-OB • Loveseat Armless / Open Back

Fully upholstered loveseat with right arm, open back and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Fully upholstered armless loveseat with open back and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Ballara • 9753 • Sofa with ArmsFully upholstered sofa with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara power module can be mounted under seat.• For multiple C.O.M.:








LOUNGE SEATINGBallara • 9753L • Sofa with Left Arm

Ballara • 9753R • Sofa with Right Arm

Fully upholstered sofa with left arm and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a section-al piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Fully upholstered sofa with right arm and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a section-al piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Ballara • 9753NA • Armless Sofa

Ballara • 9753NAHB42 • 42” High Back Armless Sofa

Fully upholstered armless sofa with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Fully upholstered high back armless sofa with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:











LOUNGE SEATING

Ballara • 9753-OB • Sofa with Arms / Open Back

Ballara • 9753NAHB48 • 48” High Back Armless Sofa

Fully upholstered sofa with open back and metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Fully upholstered high back armless sofa with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Ballara • 9753L-OB • Sofa with Left Arm / Open BackFully upholstered sofa with left arm, open backand metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Ballara • 9753R-OB • Sofa with Right Arm / Open Back

Ballara • 9753NA-OB • Sofa Armless / Open Back

Fully upholstered sofa with right arm, open backand metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


Fully upholstered armless sofa with open backand metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.• For multiple C.O.M.:


• For optional table shelf please add “TB” to the end of the code and add $772 list to the price.


PRICE764


PRICE469


PRICE1205


PRICE777


PRICE565

HEIGHT ” 5WIDTH ” 13.5DEPTH ” 27.25WEIGHT lbs 29VOLUME ft3 8

PRICE401


PRICE15

HEIGHT ” 10WIDTH ” 1DEPTH ” .075WEIGHT lbs 0.25VOLUME ft3



LOUNGE SEATINGBallara • 9754 • Storage Table

Ballara • 9755 • Corner Table

Ballara • 9765 • Two Seater Length Storage Table with Metal Base

Storage Table with metal base. Ballara ganging clip is required for sectional use. Ballara power module can be mounted under table surface. Table surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.

Corner Table with metal base. Ballara ganging clip is required for sectional use. Ballara power module can be mounted under table surface. Table surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.

Two Seater Length Storage Table with Metal Base. Ballara ganging clip is required for sectional use. Ballara power module can be mounted under table surface. Table surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.

Ballara • 9766 • Two Seater Length Coffee Table with Metal BaseTwo Seater Length Coffee Table with Metal Base. Ballara ganging clip is required for sectional use. Ballara power module can be mounted under table surface. Table surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.

Ballara • 9768 • Floating Storage Side Table with Metal Bracket

Ballara • 9767 • Floating Side Table with Metal Bracket

Floating Storage Side Table with Metal Bracket.Table surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.

Floating Side Table with Metal bracket. Table surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.

Ballara • 9759 • Ganging BracketMetal ganging clip used to fasten two Ballara sectional pieces together. Can be used on seat-ing and tables.• Available in black only.

PRICE369

HEIGHT ” 17.25WIDTH ” 14DEPTH ” 14WEIGHT lbs 9

PRICE369


PRICE382



CODE PRICE9760-6 2449760-10 301 HEIGHT ” 2.75

WIDTH ” 6DEPTH ” 2.5WEIGHT lbs 2VOLUME ft3




LOUNGE SEATINGBallara • 9757L • Left Tablet

Left Tablet mounts to underside of any Ballara lounge piece on the left side. Consists of metal support and bracket, 2 point locking mechanism and 14” round tablet surface. Tablet surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.For wood veneer, please add upcharge of $36.00.

Ballara • 9758R • Right TabletRight Tablet mounts to underside of any Ballara lounge piece on the right side. Consists of metal support and bracket, 2 point locking mechanism and 14” round tablet surface. Tablet surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.For wood veneer, please add upcharge of $36.00.

Ballara • 9756 • Middle TabletMiddle Tablet mounts to underside of any two Ballara sectional pieces. Consists of metal sup-port and bracket, 2 point locking mechanism and 14” round tablet surface. Tablet surface is offered in standard Global Contract low pressure laminates with 3mm edge and Descor veneers.For wood veneer, please add upcharge of $36.00.

Ballara • 9761 • One Seater Bench

Ballara • 9760 • Power ModulePower module includes 2 power outlets with a metal bracket that mounts underneath any Ballara seat or table. Cable manager included.• “-6”indicates a 6’ cord• “-10” indicates a 10’ cord

Fully upholstered 1 seater bench with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.

Ballara • 9762 • 2-Seater BenchFully upholstered 2 seater bench with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.







LOUNGE SEATINGBallara • 9763 • 3-Seater Bench

Fully upholstered 3 seater bench with metal base. Ballara Left or Right Tablet can be mounted on respective sides. Ballara Middle tablet can be mounted when used as a sectional piece. Ballara ganging clip is also required for sectional use. Ballara power module can be mounted under seat.

Ballara • 9764 • Section Corner Unit

Ballara • 9769S24 • Stool, 24”, Counter Height

Ballara • 9769S30 • Stool, 30” Bar Height

Fully upholstered corner lounge chair with metal base. Ballara ganging clip is also required for sectional use.For multiple C.O.M.:- back 2.5 yrds- seat 1.25 yrds

Stool with metal frame.• Cushion is 3”.

Stool with metal frame.• Cushion is 3”.



BRIDGES COLLABORATIVE SEATINGBridges Collaborative SeatingBridges Collaborative Seating upholstery features a single stitch, thick white thread around the edges. The white, wide stitch along with crisp corners are part of its distinctive personality. In order to achieve crisp edges and to minimize “pillow” effect caused by taut fabric, the upholstery material has been applied deliberately loose, which may, over time, produce puckering of the upholstery surface material. This can be easily corrected by stretching the fabric by hand or during vacuuming.

In order to efficiently utilize fabric yield all 60” seats and backs feature a seam in the middle. The double stitch seam is sewn with a thin thread, closely matching the upholstery material in colour.

Some complicated fabric patterns prevent pattern matching and will be upholstered without the seam at the discretion of the factory.

Should you require no middle seam by cutting into the roll, please specify “NO SEAM” at time of your order.

• COM yardage is an estimate only. More accurate yardage will be dependent on the width of the fabric and on the repeat pattern.

• Bridges collaborative seating collection consists of seating, privacy screens, tables, tablets and power. It is a versatile modular furniture series which can be configured into many space planning scenarios including corner, in-line, open concept, tradi-tional reception as well as secluded seating with high privacy partitions.

• Furniture pieces can be used as stand alone items or can be mechanically linked together to form a variety of seating configurations.

• Seat and backrest can be integrated with Bridges tables, as well as Boulevard panels.

• Corner tables and in-line 6” table modules double as power delivery centers.

• Dedicated seat backrests feature dual USB charging port.

• Some Inline 6” table modules are furnished with grommets to support tablets.

• Legs are available in standard Bridges metal painted finishes and anodized alumi-num finish.

FINISH PRICEHP 348 C.O.M YDGLP 405 HEIGHT ” 17

WIDTH ” 24DEPTH ” 24WEIGHT lbs 40.7VOLUME ft3 5.67


WIDTH ” 48DEPTH ” 24WEIGHT lbs 69VOLUME ft3 11.33



GRADE PRICE GRADE PRICE1 491 11 922 C.O.M YDG 1.252 525 12 1012 HEIGHT ” 173 551 13 1100 WIDTH ” 244 583 14 1189 DEPTH ” 245 632 15 1387 WEIGHT lbs 22.76 677 16 1582 VOLUME ft3 5.577 722 17 17818 764 18 19789 811 19 217410 859 20 2391




Bridges Collaborative • BRTST2424F • Low Table



• Freestanding 17” high tables.• Central partition divides space under top surface

into two 11” deep compartments. All LP chassis with HP or LP top (3mm edging). Bridges stor-age aluminum leg.

• Specify chassis and top finish, specify metal leg finish. Add $41 for anodized aluminum leg finish.

• To convert to mobile, please add $27 list and an “M” at the end of the product code.




• To convert to mobile, please Add $27 list and an “M” at the end of the product code.




• To convert to mobile, please Add $27 list and an “M” at the end of the product code.

Bridges Collaborative • BRTSE24NB • Lounge Seat

Bridges Collaborative • BRTSE48NB • Lounge Seat

• Fully upholstered armless lounge seat with metal base.

• Seats can be freestanding or linked with optional interlocking bracket kit.

• Specify fabric and leg finish.• Add $41 for anodized aluminum leg finish.




LOUNGE SEATING

GRADE PRICE GRADE PRICE1 1038 11 1899 C.O.M YDG 2.502 1105 12 2078 HEIGHT ” 173 1158 13 2254 WIDTH ” 604 1221 14 2431 DEPTH ” 245 1318 15 2828 WEIGHT lbs 476 1409 16 3219 VOLUME ft3 14.177 1499 17 36168 1582 18 40119 1676 19 440310 1772 20 4837







LOUNGE SEATINGBridges Collaborative • BRTSE60NB • Lounge Seat




• Fully upholstered armless lounge seat with full backrest and metal base.

• Backrests are permanently secured to the seats and cannot be reconfigured on site.


• Specify fabric and leg finish.• Add $41 for anodized aluminum leg finish.• For multiple C.O.M.:

- seat 1.25 yards - back 1.25 yards





- seat 2 yards - back 2 yards






Bridges Collaborative • BRTSE2424B • Lounge Seat with Backrest



• Fully upholstered armless lounge seat with one backrest and metal base.

• Specify backrest as either Left or Right side. Backrests are permanently secured to the bench and cannot be reconfigured on site.



- seat 2 yards - back 1.25 yards

Bridges Collaborative • BRTSE2448BL • Lounge Seat, Single 24” Offset Backrest







LOUNGE SEATING

Bridges Collaborative • BRTSE2448BODL • Lounge Seat, Two 24” Offset Backrest

Bridges Collaborative • BRTSE2448BODR • Lounge Seat, Two 24” Offset Backrest


• Specify backrest as either Left or Right side. Backrests are permanently secured to the bench and cannot be reconfigured on site.




• Fully upholstered armless lounge seat with two offset backrests and metal base.

• Specify either Left or Right backrest configuration. Backrests are permanently secured to the bench and cannot be reconfigured on site.



- seat 2 yards - backs 2.5 yards

• Fully upholstered armless lounge seat with two offset backrests and metal base.

• Specify either Left or Right backrest configuration. Backrests are permanently secured to the bench and cannot be reconfigured on site.




Bridges Collaborative • BRTSE2448BR • Lounge Seat, Single 24” Offset Backrest

• Fully upholstered armless lounge seat with one backrests, with dual USB outlet and metal base.

• 21” wide backrest come with embedded dual USB port in its side. Note: Each USB outlet offers 2 amps. AC/DC transformer plugs into the wall or floor monument (about 52” long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.

• Backrests are permanently secured to the bench and cannot be reconfigured on site.


• Specify fabric and leg finish.• USB outlets are white.• Add $41 for anodized aluminum leg finish.• For multiple C.O.M.:


Bridges Collaborative • BRTSE2124EBL • Single Seat, Single 21” Wide Backrest with USB






LOUNGE SEATING

Bridges Collaborative • BRTSE2148EBL • Lounge Seat, Single 21” Wide Backrest with USB

Bridges Collaborative • BRTSE2148EBR • Lounge Seat, Single 21” Wide Backrest with USB


• 21” wide backrest come with embedded dual USB port in its side. Note: the side mounted power/USB outlets always point to the centre of the seat. Each USB outlet offers 2 amps. AC/DC trans-former plugs into the wall or floor monument (approximately 4’ long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.

• Specify either Left or Right backrest configura-tion. Backrests are permanently secured to the bench and cannot be reconfigured on site.


• White USB outlets.• Specify fabric and leg finish.• Add $41 for anodized aluminum leg finish.• For multiple C.O.M.:



• 21” wide backrest come with embedded dual USB port in its side. Note: the side mounted power/USB outlets always point to the centre of the seat. Each USB outlet offers 2 amps. AC/DC trans-former plugs into the wall or floor monument (approximately 4’ long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.

• Specify either Left or Right backrest configura-tion. Backrests are permanently secured to the bench and cannot be reconfigured on site.


• White USB outlets.• Specify fabric and leg finish.• Add $41 for anodized aluminum leg finish.• For multiple C.O.M.:


• Fully upholstered armless lounge seat with one backrests, with dual USB outlet and metal base.

• 21” wide backrest come with embedded dual USB port in its side. Note: Each USB outlet offers 2 amps. AC/DC transformer plugs into the wall or floor monument (about 52” long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.





Bridges Collaborative • BRTSE2124EBR • Single Seat, Single 21” Wide Backrest with USB






LOUNGE SEATING

• Fully upholstered armless lounge seat with two offset backrests, each with dual USB outlet and metal base.

• Both 21” wide backrests come with embed-ded dual USB port in its side. Note: the side mounted power/USB outlets always point to the centre of the seat. Each USB outlet offers 2 amps. AC/DC transformer plugs into the wall or floor monument (about 52” long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.





Bridges Collaborative • BRTSE2148EBODR • Lounge Seat Two USB backrests Offset

Bridges Collaborative • BRTSE2148E2B • Lounge Seat, two 21” Wide Backrests with USB• Fully upholstered armless lounge seat with

two backrests, each with dual USB outlet and metal base.

• Both 21” wide backrests come with embedded dual USB port in its side. Note: the side mounted power/USB outlets always point to the centre of the seat. Each USB outlet offers 2 amps. AC/DC transformer plugs into the wall or floor monument (about 52” long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.





• Fully upholstered armless lounge seat with two offset backrests, each with dual USB outlet and metal base.

• Both 21” wide backrests come with embed-ded dual USB port in its side. Note: the side mounted power/USB outlets always point to the centre of the seat. Each USB outlet offers 2 amps. AC/DC transformer plugs into the wall or floor monument (about 52” long cable available from the bottom of the seat). Transformer power consumption: 0.68 amps.





Bridges Collaborative • BRTSE2148EBODL • Lounge Seat Two USB backrests Offset

BRTPP2424L1FINISH PRICEGR1 827 C.O.M YDG 2.50GR2 909 HEIGHT ” 25

WIDTH ” 29DEPTH ” 28.70WEIGHT lbs 32.00VOLUME ft3 12.04

BRTPP2448L1FINISH PRICEGR1 1103 C.O.M YDG 3.25GR2 1216 HEIGHT ” 25

WIDTH ” 53DEPTH ” 28.70WEIGHT lbs 41.00VOLUME ft3 22.01

FINISH PRICEGR1 1213 C.O.M YDG 5.00GR2 1379 HEIGHT ” 50

WIDTH ” 29DEPTH ” 28.70WEIGHT lbs 38VOLUME ft3 24.08

FINISH PRICEGR1 1599 C.O.M YDG 6.50GR2 1764 HEIGHT ” 50




LOUNGE SEATING• Fully upholstered, 2.5” thick, 3-part, low

level partition kit wraps around 24” or 48” bridges seat.

• The seat front is recessed by 2.5”. The kit is secured to seats on-site (brackets connecting seat legs to the inner side of the partition are included).

• Upholsterd kits consist of 2” hollow core boards, 1/4 foam, fabric, levelers and con-necting hardware. Specify fabric finish.

• Note: Seats and backrests are not included.

• Fully upholstered, 2.5” thick, 3-part, low level partition kit wraps around 24” or 48” bridges seat.

• The seat front is recessed by 2.5”. The kit is secured to seats on-site (brackets connecting seat legs to the inner side of the partition are included).

• Upholsterd kits consist of 2” hollow core boards, 1/4 foam, fabric, levelers and con-necting hardware. Specify fabric finish.


Bridges Collaborative • BRTPP2424L1 • Seat Partitions

Bridges Collaborative • BRTPP2448L1 • Seat Partitions

Bridges Collaborative • BRTPP2424L2 • Seat Privacy Partitions

Bridges Collaborative • BRTPP2448L2 • Seat Privacy Partitions

• Fully upholstered, 2.5” thick, 3-part, Two tier partition kit wraps around 24” or 48” bridges seat. The 50” high assembly pro-vides seated visual privacy.

• 2.5” thick, upholstered partitions improve acoustic privacy for focused time away from the team or for a quiet phone call. Recessed seat extends the partition at the front by 2.5” for enhanced sense of privacy.

• The kit is secured to seats on-site (brackets connecting seat legs to the inner side of the partition are included).

• Upholstered kits consist of 2” hollow core boards, 1/4” foam, fabric, levelers and con-necting hardware. Specify fabric finish.


• Fully upholstered, 2.5” thick, 3-part, Two tier partition kit wraps around 24” or 48” bridges seat. The 50” high assembly pro-vides seated visual privacy.

• 2.5” thick, upholstered partitions improve acoustic privacy for focused time away from the team or for a quiet phone call. Recessed seat extends the partition at the front by 2.5” for enhanced sense of privacy.

• The kit is secured to seats on-site (brackets connecting seat legs to the inner side of the partition are included).

• Upholstered kits consist of 2” hollow core boards, 1/4” foam, fabric, levelers and con-necting hardware. Specify fabric finish.


BRTS2424BFINISH PRICELP 386 C.O.M YDGHP 441 HEIGHT ” 25


BRTS2424BPFINISH PRICELP 772 C.O.M YDGHP 827 HEIGHT ” 25


PRICE27 C.O.M YDG

HEIGHT ” 1.1WIDTH ” 5DEPTH ” 2.4WEIGHT lbs 0.50VOLUME ft3 0.01

PRICE12 C.O.M YDG

HEIGHT ” 0.1WIDTH ” 6DEPTH ” 1.3WEIGHT lbs 0.3VOLUME ft3 0.01



LOUNGE SEATINGBridges Collaborative • BRTS2424BXX • Square Table Block

Bridges Collaborative • BRTSTBG • Square Table Block Ganging Bracket Kit

Bridges Collaborative • BRTSTSB • Ganging Bracket Kit• Two ganging brackets connect seat tempo-

rarily to adjacent in-line seat or 24” deep bridges storage.

• Black powder coat finish.

• Freestanding 25” high, 24” square table block serves as a visual anchor whenever bridges seat needs to turn corner, or split into two, three or four directions.

• BRTS2424BP can be positioned directly over a floor monument, which will supply power to the top-mounted Power module. This option includes 24”x24” block chassis and flush-mounted Duo power module included (two outlets and two 2.1 amp USB ports, white face plate, outlets and bezel, 72” long three prong black cord).

• The square table block can function as a self-supporting, freestanding unit or it can be secured permanently to adjacent Bridges seats with optional interconnecting brackets listed below.

• Specify LP laminate chassis, 1” LP or HP laminate surface.

• 2 Square Table Ganging Brackets Kits included.

• Two Square Table Block Ganging Brackets connect seat legs permanently to the side of the 24” square table block on site. The kit employs machine screws connecting legs to seats and ships with wood screws which provide permanent connection the the Square Table Block.

• Includes 2 brackets and screws; Black powdercoat finish.

BRTS2406BFINISH PRICELP 331 C.O.M YDGHP 358 HEIGHT ” 25


BRTS2406BPFINISH PRICELP 717 C.O.M YDGHP 744 HEIGHT ” 25


BRTS2406B2PFINISH PRICELP 1103 C.O.M YDGHP 1240 HEIGHT ” 25


BRTS2406BTFINISH PRICELP 634 C.O.M YDGHP 662 HEIGHT ” 25


BRTS2406BPTFINISH PRICELP 1020 C.O.M YDGHP 1048 HEIGHT ” 25




LOUNGE SEATINGBridges Collaborative • BRTS2406XX • Inline 6” Block

• Multifunctional Inline 6” table block divides seating areas, serves as a utility surface, can support tablet arms, lamps and double as a power delivery centre.

• It is permanently secured between two Bridges seats and cannot be placed at the end of a run. Two Square Table Block Ganging Brackets BRTSTBG connect seat legs per-manently to the side of the in-line table block on site. The included kit employs machine screws connecting legs to seats and ships with wood screws which provide permanent connection the Inline 6” Block. Black powder coat finish.

• The chassis is available without Power Module, with one Power Module or with two vertically embedded Power Modules.

• Vertical-panel flush-mounted Duo module provides two outlets and two 2.1 amp USB ports; 72” cord exits through the bottom and plugs into a floor monument under seats, white face plate and bezel.

• BRTS2406BT and BRTS2406BPT include 9.5” x 14.5” swivel tablet.

• Specify LP laminate chassis, 1” LP or HP laminate surface. If top is specified in LP the tablet will be manufactured in LP as well. If top is specified in HP the tablet will be manufactured in HP.

• 2 Square Table Ganging Bracket Kits included.

Inline table with front power module and swivel tablet arm.

Inline table with swivel tablet arm.

Inline table with front and rear power module.

Inline table with front power module

Inline table (without power module and swivel arm).

GRADE PRICE GRADE PRICE1 1821 11 3626 C.O.M YDG 52 1959 12 4003 HEIGHT ” 363 2069 13 4372 WIDTH ” 364 2202 14 4743 DEPTH ” 345 2405 15 5577 WEIGHT lbs 806 2596 16 6398 VOLUME ft3 307 2786 17 72318 2960 18 80609 3156 19 888210 3359 20 9795


GRADE PRICE GRADE PRICE1 644 11 1092 C.O.M YDG 1.252 679 12 1185 HEIGHT ” 17.753 706 13 1276 WIDTH ” 18.54 739 14 1368 DEPTH ” 18.55 789 15 1575 WEIGHT lbs 16.56 836 16 1778 VOLUME ft3 3.537 884 17 19848 927 18 21899 975 19 239310 1026 20 2619

GRADE PRICE GRADE PRICE1 1177 11 1728 C.O.M YDG 1.752 1219 12 1842 HEIGHT ” 313 1253 13 1955 WIDTH ” 24.54 1294 14 2068 DEPTH ” 23.65 1355 15 2322 WEIGHT lbs 22.76 1414 16 2572 VOLUME ft3 3.507 1472 17 28268 1525 18 30799 1585 19 332910 1646 20 3608



LOUNGE SEATINGDoubleton

Drift

(Tablet is 15.5” x 11.5” x 0.75”).• Caster option available as HC, set of 2 caster with chrome handle on back, please add $76.00 list.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

• Side chair has three base options: wooden fixed, wooden four prong swivel and metal four prong swivel. • Lounge chair has two base options: wooden four prong swivel and metal four prong swivel. • Wooden bases are made from Beech and are available in all standard wood finishes.• Metal four prong swivel base is only available in polished chrome.• Shipped fully assembled.

• The Doubleton lounge chair provides supportive comfort with a crisp, clean, contemporary aesthetic. Available with or without a tablet. A glide/caster option is also available with a chrome pull handle on the exterior of the backrest for easy movement. • Tablet for Doubleton is available in R, right or L, left and in high pressure laminate.

• The soft seat, contoured back and arms provide the perfect balance of style and comfort.• The steel framework is entirely molded in cold-cure polyurethane. Seat cushion is moulded with a double

density cold-cured polyurethane that provides a softer more luxurious sit.• Available in five standard styles: stool, side chair, low back lounge, mid back lounge and high back lounge.• Ottoman has weighted bottom to always maintain upright position.

Doubleton • 8597 • Lounge Chair

Drift • 8026 • Ottoman

Drift • 8030 • Side Chair

Doubleton • 8597 HP • Lounge Chair with Tablet

Fully upholstered, available on levelers or leveler/caster and handle option. A chrome pull handle is on the back of the backrest for easy moving (for caster option).• For multiple C.O.M.:

- seat 1 yard

Fully upholstered ottoman. The steel frame and foamed polyurethane make for a durable yet extremely comfortable sit.Weighted foot ensures stool always stays upright.

Fully upholstered side chair.The soft seat, contoured back and arms provide the perfect balance of style and comfort. Four leg wooden base.Please specify wood finish.• For multiple C.O.M.: -Seat needs 1 yrd minimumPlease contact your customer service Represen-tative for multiple C.O.M. Calculations.

Fully upholstered, with a tablet. Available on levelers or leveler/caster and handle option. A chrome pull handle is on the back of the backrest for easy mov-ing (for caster option). Tablet size : 15 1/2” x 11 1/2” x 3/4” thick. Available Left or Right, please specify. Tablet is high-pressure laminate.• For multiple C.O.M.:

- seat 1 yard

GRADE PRICE GRADE PRICE1 1368 11 1919 C.O.M YDG 1.752 1410 12 2033 HEIGHT ” 313 1444 13 2146 WIDTH ” 24.54 1485 14 2259 DEPTH ” 23.65 1546 15 2513 WEIGHT lbs 266 1605 16 2763 VOLUME ft3 6.007 1663 17 30178 1716 18 32709 1776 19 352010 1837 20 3799




GRADE PRICE GRADE PRICE1 1943 11 2906 C.O.M YDG 3.02 2017 12 3107 HEIGHT ” 34.63 2076 13 3305 WIDTH ” 29.54 2147 14 3502 DEPTH ” 31.55 2255 15 3947 WEIGHT lbs 416 2357 16 4385 VOLUME ft3 12.007 2459 17 48308 2551 18 52719 2656 19 579010 2764 20 6197



LOUNGE SEATINGDrift • 8031 • Side Chair

Drift • 8032 • Side Chair

Fully upholstered side chair.The soft seat, contoured back and arms provide the perfect balance of style and comfort. Four leg swivel wooden base.Please specify wood finish.• For multiple C.O.M.: -Seat needs 1 yrd minimumPlease contact your customer service Represen-tative for multiple C.O.M. Calculations.

Fully upholstered side chair.The soft seat, contoured back and arms provide the perfect balance of style and comfort. Four prong metal swivel base.Polished chrome base only.• For multiple C.O.M.: -Seat needs 1 yrd minimumPlease contact your customer service Represen-tative for multiple C.O.M. Calculations.

Drift • 8033 • Low Back Lounge

Drift • 8034 • Low Back Lounge

Drift • 8035 • Mid Back Lounge

Fully upholstered lounge chair.The soft seat, contoured back and arms provide the perfect balance of style and comfort. Four leg swivel wooden base.Please specify wood finish.• For multiple C.O.M.: -Seat needs 1 yrd minimumPlease contact your customer service Represen-tative for multiple C.O.M. Calculations.

Fully upholstered lounge chair.The soft seat, contoured back and arms provide the perfect balance of style and comfort. Four prong metal swivel base.Polished chrome base only.• For multiple C.O.M.: -Seat needs 1 yrd minimumPlease contact your customer service Represen-tative for multiple C.O.M. Calculations.




GRADE PRICE GRADE PRICE1 2137 11 3169 C.O.M YDG 3.252 2216 12 3384 HEIGHT ” 43.73 2279 13 3595 WIDTH ” 29.54 2355 14 3807 DEPTH ” 31.55 2471 15 4283 WEIGHT lbs 48.56 2580 16 4753 VOLUME ft3 18.367 2689 17 52298 2788 18 57029 2901 19 617210 3017 20 6695



LOUNGE SEATINGDrift • 8036 • Mid Back Lounge

Drift • 8037 • High Back Lounge

Drift • 8038 • High Back Lounge




PRODUCT PRICE SIZE / INCHES WEIGHT VOLCODE H W D LBS FT³8041R26C 767 16 26 26 46 68041R30C 802 16 30 30 46 88041R36C 1007 16 36 36 62 12

PRODUCT PRICE SIZE / INCHES WEIGHT VOLCODE H W D LBS FT³8042SQ22C 767 16 22 22 43 48042SQ28C 802 16 28 28 46 78042SQ34C 1007 16 34 34 62 11

PRODUCT PRICE SIZE / INCHES WEIGHT VOLCODE H W D LBS FT³8043OV26C 767 16 26 22 40 58043OV31C 802 16 31 26 46 78043OV36C 1007 16 36 30 62 10

PRODUCT PRICE SIZE / INCHES WEIGHT VOLCODE H W D LBS FT³8041R26W 756 16 26 26 40 68041R30W 791 16 30 30 40 88041R36W 865 16 36 36 54 12

PRODUCT PRICE SIZE / INCHES WEIGHT VOLCODE H W D LBS FT³8042SQ22W 756 16 22 22 37 48042SQ28W 791 16 28 28 40 78042SQ34W 865 16 34 34 54 11

PRODUCT PRICE SIZE / INCHES WEIGHT VOLCODE H W D LBS FT³8043OV26W 756 16 26 22 37 58043OV31W 791 16 31 26 40 78043OV36W 865 16 36 30 54 10



LOUNGE SEATINGDrift • 8041 • Round Occasional Table, Chrome Base

Drift • 8042 • Square Occasional Table with Radiused Corners, Chrome Base

Drift • 8043 • Oval Occasional Table, Chrome Base

Drift • 8041 • Round Occasional Table, Wood Base

Drift • 8042 • Square Occasional Table with Radiused Corners, Wood Base

Drift • 8043 • Oval Occasional Table, Wood Base

Round table with polished chrome 4 promg base.Please specify high pressure laminate for top.

Square table with radiused corners and polished chrome 4 prong base.Please specify high pressure laminate for top.

Oval table with polished chrome 4 prong base.Please specify high pressure laminate for top.

Round table with wooden 4 prong base. Please specify wood finish for legs and high pressure laminate for top.

Square table with radiused corners and wooden 4 prong base. Please specify wood finish for legs and high pressure laminate for top.

Oval table with wooden 4 prong base. Please specify wood finish for legs and high pressure laminate for top.





MODEL # PRICE CYLINDER DIAMETER8435-1524 753 15” 24”8435-2224 781 22” 24” HEIGHT ” 15, 228435-1530 898 15” 30” WIDTH ” 24, 308435-2230 926 22” 30” DEPTH ” 24, 30

WEIGHT lbs 44VOLUME ft3 10



LOUNGE SEATINGJeo

• Jeo also offers two sizes of matching round pedestal occasional tables.• Height adjustable tilter has HC, hard casters for carpet surfaces as standard, for SC, soft casters for

hard floors please add $27.00 list, for HG, hard glides please add $40.00 list.• Tilter has SB, black five legged injection molded base is standard. For PA polished aluminum base

please add $146.00 list.

• Jeo is a retro contemporary series offering design versatility for a number of workplace applications. The cube design looks great and functions well in lounge, collaborative and small groups, or even side/guest environments.

• The control mechanisms are either a swivel tilter or a swivel centre return offered with the pedestal base.

• The seat, back and arms can be upholstered in fabric, vinyl, leather or a combination of two or more materials. For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.

Jeo • 8434 • Lounge ChairFully upholstered contemporary lounge chair on a swivel flat circular metal base.Quilted Back Option: Add “Q” to the code with an upcharge of $110.00.Optional base finish: • Chrome Brushed • Chrome• For multiple C.O.M.:

- back 1 yrd - seat 1 yrd - arms 1.5 yrds

Fully upholstered contemporary lounge chair on a traditional 5 prong base.Quilted Back Option: Add “Q” to the code with an upcharge of $110.00.

• For PA polished aluminum base, please add $146.00 list.

• For multiple C.O.M.: - back 1 yrd - seat 1 yrd - arms 1.5 yrds

Jeo • 8433-4 • Lounge Chair

Jeo • 8437 • Chair with 4 legs

Jeo • 8435 • Round TableRound table with a high pressure laminate top, PVC edge and metal base.

Optional base finish: • Chrome Brushed • Chrome

Fully upholstered contemporary lounge chair on a fixed metal four legged base.

Quilted back option: add “Q” to the code with an upcharge of $110.00 list. (include drawing)

Metal components are standard in BLK black, TUN Tungsten or DWT Designer White. For CH Chrome or BCH Brushed Chrome add $146.00 list• For multiple C.O.M.:

- back 1 yrd - seat 1 yrd - arms 1.5 yrds

PRICE DIMENSIONS625 24.5”x25.5”


MODEL # PRICE CYLINDER DIMENSIONS8436-1524 753 15” 24”x24”8436-2224 781 22” 24”x24” HEIGHT ” 15, 228436-1530 898 15” 30”x30” WIDTH ” 24, 308436-2230 926 22” 30”x30” DEPTH ” 24, 30

WEIGHT lbs 44VOLUME ft3 10






LOUNGE SEATING

Jeo • 8438 • Table with 4 legsSquare table with high pressure laminate top 3mm edge and 4 legged metal base

Metal components are standard in BLK black, TUN Tungsten or DWT Designer White. For CH Chrome or BCH Brushed Chrome add $146.00 list.

Jeo • 8436 • Square TableSquare table with a high pressure laminate top, PVC edge and metal base.

Optional base finish: • Chrome Brushed • Chrome

Lux • LX2226SC • Side Chair

Lux • LX2426AC • Arm Chair

Lux Side Chair fully upholstered armless side chair.

Please specify wood finish.

Lux Arm Chair fully upholstered side chair.


Lux • LX3433CH • Lounge ChairLux Lounge Chair with cylindrical back bolster and wood support frame.









LOUNGE SEATINGLux • LX3636TT • Ottoman

Lux Ottoman oversized ottoman to match sofas and lounge chair. Fully upholstered with wood support frame.


Lux • LX6033S • Two Seater SofaLux Two-Seater Sofa with cylindrical bolsters and wood support frame.


Lux • LX8033S • Three Seater SofaLux Three-Seater Sofa with cylindrical bolsters and wood support frame.


Minolo • 4700-1 • Lounge ChairLounge Chair contemporary lounge chair, fully upholstered with loose seat cushion, tight back, and brushed aluminum legs.

Minolo • 4700-2 • Two Seater LoveseatTwo-Seater Loveseat contemporary Loveseat, fully upholstered with loose seat cushions, tight back, and brushed aluminum legs.








LOUNGE SEATINGMinolo • 4700-3 • Three Seater Sofa

Three-Seater Sofa contemporary sofa, fully up-holstered with loose seat cushions, tight back, and brushed aluminum legs.

Minolo • 4700-1 N1 • Armless Lounge ChairArmless Lounge Chair contemporary lounge chair, fully upholstered with loose seat cushion, tight back, and brushed aluminum legs.

Minolo • 4700-2 N1 • Armless Two Seater LoveseatArmless Two-Seater Loveseat contemporary Loveseat, fully upholstered with loose seat cushions, tight back, and brushed aluminum legs.

Minolo • 4700-3 N1• Armless Three Seater SofaArmless Three-Seater Sofa contemporary sofa, fully upholstered with loose seat cushions, tight back, and brushed aluminum legs.

ML • ML2630 • Lounge ChairLounge Chair with metal frame.

Please specify frame finish: CH ChromeBCH Brushed ChromeBLK BlackTUN TungstenDWT Designer White• For multiple C.O.M.:









LOUNGE SEATINGML • ML2326 • Dining Chair

Dining Chair with metal frame.

Please specify frame finish: CH ChromeBCH Brushed ChromeBLK BlackTUN TungstenDWT Designer White• For multiple C.O.M.:


ML • ML2121 • OttomanOttoman to match lounge chair. Metal frame.

Please specify frame finish: CH ChromeBCH Brushed ChromeBLK BlackTUN TungstenDWT Designer White

ML • ML1717S33 • Stool, 33” High Bar HeightHigh Bar Stool with metal frame.


ML • ML1717S30 • Stool 30”, Bar Height

ML • ML1717S24 • Stool, 24”, Counter Height

Bar Stool with metal frame.


Counter height stool with metal frame.








LOUNGE SEATINGML Park • ML6634 • Love Seat

ML Park Love Seat with open ends and polished aluminum legs.For fixed back cushion, please add “FC” to the end of the product code and add upcharge of $176.• For multiple C.O.M.:

-loose cushion 2 yards -remainder 6 yards

ML Park • ML8634 • SofaML Park Sofa with open ends and polished aluminum legs.For fixed back cushion, please add “FC” to the end of the product code and add upcharge of $221.• For multiple C.O.M.:


ML Park • ML4634 • SingleML Park Single Seater with open ends and polished aluminum legs.For fixed back cushion, please add “FC” to the end of the product code and add upcharge of $132.For seamless cushion, please add “SL” at the end of the product code and add upcharge of $132.• For multiple C.O.M.:


ML Park • ML2634 • OttomanML Park Ottoman, clean contemporary aesthet-ics, polished aluminum legs.







LOUNGE SEATING

Orion • 8481 • Lounge Chair

Orion

Lounge Chair clean, contemporary aesthetics, multi-functional options, wood veneer arms caps and legs.• For multiple C.O.M.:

- outside back 1 yrd - inside back 1 yrd - seat 1 yrd - arms 2 yrds - front deck 0.5 yrds

• New lounge seating with star quality is a perfect fit for a wide range of environments such as conference and training rooms, reception areas, lobbies, libraries, cafeterias, restaurants and hotels. Clean, contemporary aesthetics and multi-functional options, the Orion is available as a one, two and three seater with wood veneer arms caps and legs. Available in standard Global Contract wood finishes, fabrics and leather. Options include: tablet, upholstered arms, pull handle, levelers and casters.• For details on fabric offerings and COM requirements, please see the Fabrics and Finishes section.• For fully upholstered arms, please specify ”U” after the code. The price remains the same.

Orion • 8482 • Two Seater SofaTwo-Seater Sofa clean, contemporary aesthet-ics, multi-functional options, wood veneer arms caps and legs.• For multiple C.O.M.:

- outside back 1.5 yrds - inside back 2 yrds - seats 2 yrds - arms 2 yrds - front deck 0.75 yrds

Orion • 8483 • Three Seater SofaThree-Seater Sofa clean, contemporary aesthet-ics, multi-functional options, wood veneer arms caps and legs.• For multiple C.O.M.:

- outside back 2.25 yrds - inside back 3 yrds - seats 3 yrds - arms 2 yrds - front deck 1.5 yrd

Orion • 8484 • OttomanOttoman clean, contemporary aesthetics, wood legs.• For multiple C.O.M.:

- top 1 yrd - sides 1 yrd








LOUNGE SEATING

Venture • 8506-60 • Banquette, Closed Back, 60”Two-Seater freestanding extra wide banquette, fully upholstered seat and back.

Round metal foot can be specified in BLK black or TUN Tungsten.

Venture • 8506-72 • Banquette, Closed Back, 72”Three-Seater freestanding banquette, fully upholstered seat and back.


Venture • 8506-48 • Banquette, Closed Back, 48”Two-Seater freestanding banquette, fully uphol-stered seat and back.


Venture • 8507-48 • Banquette, Open Back, 48”

Venture • 8506-78 • Banquette, Closed Back, 78”

Two-Seater freestanding banquette, open back upholstered front and seat.


Three-Seater freestanding extra wide banquette, fully upholstered seat and back.









LOUNGE SEATINGVenture • 8507-60 • Banquette, Open Back, 60”

Two-Seater freestanding extra wide banquette, open back upholstered front and seat.


Venture • 8507-72 • Banquette, Open Back, 72”Three-Seater freestanding banquette, open back upholstered front and seat.


Venture • 8507-78 • Banquette, Open Back, 78”Three-Seater freestanding extra wide banquette, open back upholstered front and seat.


Venture • 8508-48 • Banquette, Double Back, 48”Four-Seater freestanding banquette, fully uphol-stered shared back and double seat.


Ships assembled.

Venture • 8508-60 • Banquette, Double Back, 60”Four-Seater freestanding extra wide banquette, fully upholstered shared back and double seat.


Ships assembled.



PRICE34

HEIGHT ” 0.25WIDTH ” 2.5DEPTH ” 6WEIGHT lbs 0.25




LOUNGE SEATINGVenture • 8508-72 • Banquette, Double Back, 72”

Six-Seater freestanding banquette, fully uphol-stered shared back and double seat.


Ships assembled.

Venture • 8508-78 • Banquette, Double Back, 78”Six-Seater freestanding extra wide banquette, fully upholstered shared back and double seat.


Ships assembled.

Venture • 8509 • Ganging BracketCan only gang items back to back.

Vitrola • 8271 • Chair

Vitrola

Low arm contemporary lounge chair, fully upholstered seat and back with wooden legs.


• Vitrola is a finely-tailored, transitional reflection on the 19th century French Empire style. Simplied geometry and proportions make it right for the times.

• Classic soft seating upholstery design with swooping arms.• Available in standard Lounge, High Back Lounge along with Two and Three Seat

Sofa models.• Matching Ottoman and Accent Pillow complete the offering.• Fully upholstered with piping details at the bottom of frame.• Seat cushions are fixed or sewn tight.• Standard in tapered maple wood legs.• All models ship fully assembled.• Back is continuous without seams. In the event the fabric cannot be railroaded,

stitch lines will be required (one for 2 seater and 2 for 3 seater).








LOUNGE SEATINGVitrola • 8272 • Two Seater

Two-Seater contemporary low arm sofa, fully upholstered seat and back with wooden legs.


Vitrola • 8273 • Three SeaterThree-Seater contemporary low arm sofa, fully upholstered seat and back with wooden legs.


Vitrola • 8274 • OttomanOttoman to match sofas and lounge chair, fully upholstered with wooden legs.


Vitrola • 8275 • High Back Chair

Vitrola • 8276 • Bolster Cushion

Low arm high back contemporary lounge chair, fully upholstered seat and back with wooden legs.Please specify wood finish.

Bolster cushion for Vitrola series, loose, can be located as desired.

PRICE416


PRICE272


PRICE536




SEATING PARTSTablet • 8200IT • Interchangeable Tablet

Swivel Interchangeable Tablet, Tablet can be retrofit on the following Lounge Chairs: Orion and Doubleton. Consists of a metal tube, bracket, with a high pressure tablet surface in any Global Contract standard laminate finishes.• Tablets have a weight capacity of 20lbs

Tablet • 8200ST • Swivel Tablet

Tablet • 8200PT • Swivel / Pivot TabletSwivel and Pivot Tablet, Tablet can be ret-rofit on the following Lounge Chairs: Orion, and, Doubleton. Consists of a metal tube, bracket, pivot mechanism and high pressure tablet surface in any Global Contract standard laminate finishes.• Tablets have a weight capacity of 20lbs

Swivel Tablet, Tablet can be retrofit on the following Lounge Chairs: Orion and Double-ton. Consists of a metal tube, bracket, pivot mechanism and high pressure tablet surface in any Global Contract standard laminate finishes.• Tablets have a weight capacity of 20lbs

PRICE97 DEPTH ” 28

HEIGHT ” 6 WEIGHT lbs 10WIDTH ” 28 VOLUME ft3 4

PRICE38 DEPTH ” 2


PRICE38 DEPTH ” 2


PRICE48 DEPTH ” 2


PRICE60 DEPTH ” 2


PRICE60/pair DEPTH ” 3

HEIGHT ” 1 WEIGHT lbs 1WIDTH ” 9 VOLUME ft3 0.5





PRICE61/set DEPTH ”

HEIGHT ” 2.5 WEIGHT lbs 1WIDTH ” 2.5 VOLUME ft3 0.5

PRICE88/set DEPTH ”

HEIGHT ” 2.5 WEIGHT lbs 1WIDTH ” 2.5 VOLUME ft3 0.5



SEATING PARTSPlease specify chair model.

Please specify chair model.









Black Plastic Base with Casters • STGBASEWCAST

Cylinder 3” • STG3CYL




Arm Caps • Kidney • STGARMCAPSKN

Arm Caps • Tear Drop • STGARMCAPSTD

Arm Caps • Government • STGARMCAPSG

HC Casters • Hard Casters 5 per set

SC Casters • Soft Casters 5 per set





Page • globalcontract.comH.14

• July 2012GLOBALContractTHE GLOBAL GROUP SHOWROOM1350 Flint Road, Toronto, Ontario, M3J 2J7Sales & Marketing • TEL: 1-877-446-2251 • FAX: 416-667-0338Customer Service • TEL: 416-739-5000 • FAX: 800-361-3182

VANCOUVER SHOWROOM675 West Hastings Street, Suite 1000, Vancouver, BC, V6B 1N2

EDMONTON SHOWROOM201-10158 103 Street N.W. Edmonton, Alberta, Canada T5J 0X6 • TEL: 780-443-3913

CALGARY SHOWROOM302 8 Avenue SE Calgary, AB, T2G 2M3 • TEL: 403-250-7770

WINNIPEG SHOWROOM220-111 Lombard Avenue, Winnipeg, MB, R3B 0T4 • TEL: 204-925-3350

OTTAWA SHOWROOM251 Laurier Avenue West, 4th Floor, Ottawa, ON, K1P 5T6

MONTREAL SHOWROOM980 St-Antoine Street Ouest Montreal, Bureau 200, QC, H3C 1A8 • TEL: 514-866-4331

HALIFAX SHOWROOM1061 Marginal Road, Suite 120, Halifax, Nova Scotia, B3H 4P7 • TEL: 902-422-7434

QUEBEC SHOWROOMComplex Lebourgneuf 2, 815, boul. Lebourgneuf, Suite 502 Quebec, QC, G2JOC1 • TEL: 418-653-6111

Visit us on the Internet at globalcontract.com

ISO 9001:2015OHSAS 18001:2007 ISO 14001:2015

Documents

LL Contract Seating 2019 Price List · ISO 9001:2015 ISO 14001:2015 ISO 45001:2018. Page 2 • ... Chair Safety Tips Shipping How to Order C.O.M / C.O.L Fabrics Act Performance Symbols