AUCTIONAUCTIONTuesday, March 14, 2006Beginning at 10:00 AM EST1100 Evans AvenueAkron, OH 44305

Table Type Horizontal Boring Mills Jig MillVertical Machining Centers EDMS4-Post Hydraulic Press Hydraulic Surface Grinders Engine Lathes

www.BIDITUP.comBIDITUP AUCTIONS & APPRAISALS WORLDWIDE

LIVE ON-SITE & WEBCAST

COMPLETE STATE-OF-THE-ART CNC MOLD MAKING & MACHINING FACILITY FEATURING VERTICAL MACHINING CENTERS,YEAR 2000’S HORIZONTAL BORING MILLS AND EDMS

Diversified Engraving, Stamp and Machine Co., LLC

WEBCASTCan’t attend the auction in person?

Bid live on www.BIDITUP.com

5“ Olympia 5-Axis Table Type CNC Horizontal Boring Mill Okuma Howa 55V Vertical Machining Center

Vertical Mills Radial Drill Vertical Band Saws Horizontal Band Saw Chop Saw Tool Cutters/Sharpeners

Grinders/Sanders Pantograph Machines Rolling Stock Air Handling Material Handling Large Quantity Of CNC Tooling & Holders

1999 CNC

5 - Axis

1995 CNC

2 Available

Mighty Comet VMC-1500GXT Vertical Machining Center

61” x 32” x 26” Travels

41” x 22” x 22” Travels

1999 CNC

TABLE TYPE HORIZONTAL BORING MILLS, JIG MILL, VERTICAL MACHINING CENTERS, AND A LARGE QUANTITY OF CNC TOOLING & HOLDERS

TO SCHEDULE AN AUCTION OR APPRAISAL

1999 5” Olympia 5-Axis CNC Table Type Horizontal Boring Mill, MDL. HT 50X60, 49" X 49" Built-In CNC Rotary Table, 50" X-Axis, 60" Y-Axis, 28" Z-Axis, 3,000 RPM, 50-Taper, Chip Conveyor, Siemens Acramatic 2100 CNC Control, S/N OE-99-265

2000 TOS 4.1" Table Type Horizontal Boring Mill, MDL. WHN-105NC, 49" X 55" Built-In Rotary Table, 71" X-Axis, 49" Y-Axis, 49" W-Axis, 25" Z-Axis, 10-2,240 RPM, 50-Taper, 38 HP on Spindle, Ball Screws, Servo Drives, Heidenhain POSITIP 855 Programable DRO, S/N 0310

TABLE TYPE HORIZONTAL BORING MILLS

- 2 -

Devlieg Spiramatic Jig Mill, MDL. 3K-96, 3” Capacity, 3” Spindle Diameter, 35” x 96” Table, 96” Longitudinal Travel, 16” Retraction Travel, 60” Vertical Spindle Travel, 17-1,660 RPM Spindle Speed, 40-Taper, .0013-.167 IPR Spindle Feed Rate, .5-36 IPM Milling Feed Rate, 2-Axis Commando Point to Point Positioning, Rapid Feed in all Directions, Stainless Steel Way Covers, S/N 8948 - To Be Sold Via Photo, Located in Detroit, MI

JIG MILL

1999 Mighty Comet Vertical Machining Center, MDL. VMC-1500GXT, 67" X 30" Table, 61" X-Axis, 32" Y-Axis, 26" Z-Axis, 4,250 RPM Geared Head, 50-Taper, 20 ATC, Box Ways, Table Guards, Mitsubishi 530M CNC Control, S/N 000636

1999 Mighty Comet Vertical Machining Center, MDL. VMC-1500G, 63" X 30" Table, 58" X-Axis, 28.5" Y-Axis, 24.5" Z-Axis, 4,250 RPM Geared Head, 50-Taper, 20 ATC, Box Ways, Table Guards, Mitsubishi 530M CNC Control, S/N 000635

(2) 1995 Okuma Howa CNC Vertical Machining Center, MDL. 55V, 63" X 22" Table, 41" X-Axis, 22" Y-Axis, 22" Z-Axis, 30-4,000 RPM Geared Head, 24-ATC, 50-Taper, 3,300 LB Table Load Capacity, Box Ways, Fanuc 16M CNC Control, S/N 06088 & 06087

(2) 1991 Okuma Howa Vertical Machining Center, MDL. 5V-NC , 63" X 24" Table, 41.3" X, 22" Y, 22" Z, 50-Taper, 40-2,500 RPM Geared Head, Box Ways, Hand Wheels, Fanuc OM CNC Control, S/N 55867 & 55785

(2) 1997 Fadal CNC Vertical Machining Center, MDL. VMC2216, 16” x 36” Table, 22” X-Axis, 16” Y-Axis ,16” Z-Axis, 21-ATC, 40-Taper, 10,000 RPM, High Torque, Pre-Wired for 4th-Axis, S/N 9701133, 9701132

1996 Fadal CNC Vertical Machining Center, MDL. VMC2216, 16” x 36” Table, 22” X-Axis, 16” Y-Axis ,16” Z-Axis, 21-ATC, 40-Taper, 10,000 RPM, High Torque, Pre-Wired for 4th-Axis, S/N 9602127

VERTICAL MACHINING CENTERS

LARGE QUANTITY OF CNC TOOLING & HOLDERS

1999 CNC

5 - Axis

CALL 818.508.7034

5“ Olympia 5-Axis Table Type CNC Horizontal Boring Mill

2000

4.1” TOS Table Type Horizontal Boring Mill

About BIDITUP Auctions & Appraisals Worldwide

BIDITUP is a global leader in asset conversion, providing auction, real estate, lease & finance and appraisal services to a comprehen-sive array of markets.Headquartered in Los Angeles for over 25 years, BIDITUP auction management services feature public onsite auctions, live Webcast auctions in real time and online auctions. And, with www.BIDITUP.com translated into eight languages, BIDITUP sells individual and aggregated assets across the globe, 24 hours a day, seven days a week.Whether selling an individual asset, inquiring as to the value of business assets, or liquidating an entire operation,BIDITUP prides itself on finding and matching buyers and sellers to maximize value.Today, BIDITUP Auctions & Appraisals Worldwide is recognized as one of the world’s leaders in the auction industry. Knowing Asset Values is Our Business.Visit us online or call (818) 508-7034 for more information.

50" X-Axis, 60" Y-Axis, 28" Z-Axis

71" X-Axis, 49" Y-Axis, 49" W-Axis, 25" Z-Axis

www.BIDITUP.comBIDITUP AUCTIONS & APPRAISALS WORLDWIDE

- 3 -

CNC VERTICAL MACHINING CENTERS, JIG MILL

Okuma Howa 55V Vertical Machining Center Okuma Howa 5V-NC Vertical Machining Center

1995

41” x 22” x 22” Travels

CNC 1991 CNC

2 Available 41” x 22” x 22” Travels 2 Available

Mighty Comet VMC-1500G Vertical Machining Center Mighty Comet VMC-1500GXT Vertical Machining Center

1999

58” x 28.5” x 24.5” Travels

CNC 1999 CNC

61” x 32” x 26” Travels

Devlieg Spiramatic Jig Drill Fadal VMC2216 CNC Vertical Machining Center

3“ Capacity

96” x 16” x 60” Travels

17-1660 RPM Variable Speed

1996 - 1997 CNC

22” x 16” x 16” Travels 3 Available

- 4 -

FOR LEASE & FINANCE SERVICES - BIDITUP CAPITAL CORPORATIONCALL 818.508.7034

1993 Hansvedt RAM Type EDM, 20” x 30” Table, 150 Amp, H-Pulse 1506 Control, 2-Axis DRO, S/N AR-13706

1991 Hansvedt RAM Type EDM, 20” x 30” Table, 150 Amp, H-Pulse 1506 Control, 2-Axis DRO, S/N AB-11114

EDMS

1995 Chevalier Hydraulic Surface Grinder, MDL. FSG-1632AD, 16” x 32” Electromag-netic Chuck, Auto Downfeed, Oil Separator, S/N G-3839004

Simplex Blohm Hydraulic Surface Grinder, 10” x 24” Magnetic Chuck, Auto Downfeed, S/N RBN515-1906

1995 Chevalier Hydraulic Surface Grinder, MDL. FSG-1020AD, 10” x 20” Electromag-netic Chuck, Auto Downfeed, S/N F183B003

Kent Hydraulic Surface Grinder, 8” x 20” PM Chuck, Auto Downfeed, Coolant, S/N 80070

Grand Rapids Hydraulic Surface Grinder, MDL. # 250, 6” x 18” Fineline Electric Chuck & Controls, Auto Downfeed, 20” Table to Spindle Center, VS Drive, Coolant, S/N 250113

1992 Chevalier Manual Hydrauylic Surface Grinder, MDL. FSG-618M, 6” x 18” PM Chuck, S/N A-1815023

Abrasive Hydraulic Manual Surface Grinder, MDL. NO. 1 1/2, 6” x 18” Chuck, S/N 2518

HYDRAULIC SURFACE GRINDERS

Michigan 100-Ton 4-Post Hydraulic Spotting Press, 33” x 56” Between Posts, 52” Daylight

4-POST HYDRAULIC PRESS

Clausing-Colchester Engine Lathe, 21” Swing x 60” Centers, 4-Jaw Chuck, 4” Capacity, 4-Way Tool Post, Coolant, S/N 8/0222/03867

1989 Supermax Engine Lathe, MDL. LG-174SH, 17” Swing x 40” Centers, 2” Capacity, 4-Way Tool Post, Coolant, S/N 167

ENGINE LATHES

(3) 1992 Bridgeport Vertical Mill, 2 HP, Variable Speed, Chrome Ways, 2-Axis DRO, S/N BR262013, BR262015, BR262027

1989 Bridgeport Vertical Mill, 2 HP, Variable Speed, Chrome Ways, 2-Axis DRO, S/N BR253164

1988 Bridgeport Vertical Mill, 2 HP, Variable Speed, Chrome Ways, 2-Axis DRO, S/N BR252258

(2) 1985 Bridgeport Vertical Mill, 2 HP, Variable Speed, Chrome Ways, 2-Axis DRO, S/N BR246424, BR246243

1984 Bridgeport Vertical Mill, 2 HP, Variable Speed, Chrome Ways, 2-Axis DRO, S/N 236950

VERTICAL MILLS

Chevalier FSG - 1632 AD Hydraulic Surface Grinder

1995

Auto Down Feed 16” x 32”Chevalier FSG - 1020 AD Hydraulic Surface Grinder

1995

Auto Down Feed 10” x 20”

1993

Hansvedt RAM Type EDM

1991

Hansvedt RAM Type EDM

EDMS, 4 - POST HYDRAULIC PRESS, HYDRAULIC SURFACE GRINDERS, ENGINE LATHES, VERTICAL MILLS

LEASE/FINANCING AVAILABLE DIRECT FROM

BIDITUP Capital CorporationCALL 818.508.7034

www.BIDITUP.comBIDITUP AUCTIONS & APPRAISALS WORLDWIDE

- 5 -

HYDRAULIC PRESS, HYDRAULIC SURFACE GRINDERS, VERTICAL MILLS, ENGINE LATHES, RADIAL DRILL, VERTICAL & HORIZONTAL BAND SAWS

DIRECTIONSFrom: CLEVELAND HOPKINS INT'L AIRPORT, OH (CLE)(Appox. 35 Miles From Auction Site)

Take the I-71 South toward Columbus. Take exit #233 onto I-80 East toward Youngstown/Toledo. Take exit #180 onto OH-8 South toward I-90. Take ramp toward Broad Boulevard. Turn Left on Broad Boulevard. Broad Boulevard becomes Broad Avenue. Broad Avenue becomes Tallmadge Road. Continue on Brittain Road. Turn Right on Evans Avenue. Arrive at 1100 Evans Avenue, Akron. Auction Site is on the left, look for signs.

LODGINGRadisson Hotel20 W Mill StAkron, OH ............................................ 330-384-1500

Country Inn & Suites By Carlson1420 Main StCuyahoga Falls, OH ........................... 330-926-1233

Crowne Plaza Akron Quaker Square135 S Broadway StAkron, OH ............................................. 330-253-5970

ON-SITE & WEBCAST AUCTION

Can’t make it to the auction in person?Bid live online at

www.BIDITUP.com

Michigan 4-Post Hydraulic Press

3 Available 2 Available 3 Available

100 TON 1992

1984 - 1985 1988 - 1989 1992

Chevalier FSG-618M Kent Hydraulic Surface Grinder Abrasive Hydraulic Surface Grinder

Bridgeport Vertical Mill Bridgeport Vertical Mill Bridgeport Vertical Mill

Engine Lathe Engine Lathe IKEDA Radial Drill

Marvel Vertical Band Saw Wellsaw Horizontal Band Saw Tool SharpenerDoAll Vertical Band Saw

RADIAL DRILL, VERTICAL BAND SAWS, HORIZONTAL BAND SAW, CHOP SAW, TOOL CUTTERS/SHARPENERS

- 6 -

TO SCHEDULE AN AUCTION OR APPRAISALCALL 818.508.7034

1982 Ikeda Radial Drill, MDL. RM-1325, 4” Arm, 12” Column, 50-1,500 RPM, Box Table, S/N 82158

RADIAL DRILL

Wellsaw Horizontal Band Saw, MDL. 600, 8” x 20” Capacity, Coolant, S/N

HORIZONTAL BAND SAW

Everett 10” Chop Saw

CHOP SAW

Marvel Vertrical Band Saw, MDL. Series 8, 18” Throat

DoAll Vertical Band Saw, MDL. 1612-0, 16” Throat, Blade Welder, S/N 277-70721

VERTICAL BAND SAWS

G & L Drill Sharpener, MDL. HC, 1/16”-1.5” Drill Diameter, 12” Max Grinding Wheel, 1 HP, ¼ HP Work Head Motor, S/N 940-00004-74

(4) Deckel Tool Cutter & Grinders

TOOL CUTTERS/SHARPENERS

CAPITAL CORPORATION

Leasing & Financing ServicesNow Available From

BIDITUP Capital Corporation

BIDITUP with Confidence!BIDITUP with Confidence!

We finance all types of new and used machinery. Equipment including:

• Metalworking • Industrial• Construction • Woodworking • Printed Circuit Board, Fiber Optics, & TeleCom

Preserve your cash and short term credit lines. Consider BIDITUP Capital Corporation. We’re able to offer up to 100% financing, plus coverage of soft costs, sales tax, rigging and shipping expenses.

Call 818.508.7034 for complete information about how BIDITUP Capital Corporation can help you today.

“Knowing Asset Value is Our Business”

• Auto• Printing • Foundry• Plastics and Molding • Material Handling • And More!

Fast TurnaroundCompetitive RatesMinimal PaperworkAll Credit Considered

BIDITUP Capital Corporation is a wholly-owned subsidiary of BIDITUP Auctions & Appraisals Worldwide, a global leader in asset recovery and conversion since 1977. BIDITUP Capital Corporation understands the value of industrial and high-tech assets.

Can’t make it to the auction in person? Bid live online at

www.BIDITUP.comWEB

CAST

4 Available

Grinders, Sanders, Cut Off Saw

Deckel Tool Cutters & Grinders G & L Drill Sharpener

Tool Cutters & Grinders Tooling

Syncrowave 250 Welder CNC Tooling & Holders

REGISTER AT www.BIDITUP.com AND RECEIVE UPCOMING AUCTION UPDATES VIA EMAIL! - 7 -

Deckel 2-Dimension Panotgraph, MDL. G11, S/N 86278

Deckel 2-Dimension Panotgraph, MDL. GK-21, S/N 8461

Gorton 2-Dimension Pantograph, MDL. P2-02, S/N 47679

PANTOGRAPH MACHINES

1997 Daewoo LPG Fork Lift, MDL. GC305, 6,000 LB, Side Shift, S/N D605863

Crown Electric Platform Lift Truck, 1,500 LB, S/N 361334

ROLLING STOCK

5-Ton Single Girder Underhung Bridge Crane, 20’10” Span x 83’ Run, 2-Speed Hoist, Single Speed Bridge & Trolley, 8-Button Control From Hoist

2-Ton Underhung Single Girder Free Standing Bridge Crane System, 29’ Wide x 43’ Long x 14’ High, 25’ Span, Budget Chain Hoist, 8 FPM, Chain Container Push Trolley

MATERIAL HANDLING

Quincy Dual 20 HP Reciprocating Air Compressor, 200 Gallon Resevoir, Heat Transfer Unit, S/N 0075461

AIR HANDLING

Torit Dust Collection System, 1997 Miller Syncrowave 250 Tig Welder, Fast Heat Multi-Zone Temp Control, Rotary Tables, Kurt Vises, C-Clamps, Mills, Reamers, Taps, Boring Bars, Hand Tools, Gauge Sets, Calipers, Micrometers, Height Gauges, Steel Plates, Electric Hoists, Transformers, Metal Shelving, Metal Cabinets, Office Furniture, PCs

MISCELLANEOUS

Powermatic Combination 6” Belt and 12” Disc Grinder

Cincinnati Pedestal Bench Grinder

GRINDERS/SANDERS

Unbelievable User/Owner or Investor Opportunity!REAL ESTATE - FOR SALE/LEASE

Industrial Property With Rental Income127,000 Sq Ft Steel Frame Bldg on 13 Acres

50% of Property Leased for 5 Years at $5,000/Month

Former Location of American Casual Furniture - Built in 19791501 Truman Blvd, Caruthersville, MO 63830

Call Us Now! - 818.508.7034

Daewoo Fork Lift

1997

Quincy Air Compressor Torit Dust Collector

20-HP

5 - Ton Bridge Crane

2 - Ton Bridge Crane

5 TON

2 TON

Thinking of Having an Auction?

Need an Appraisal or Free Consultation?

Know of Any Facilities Closing, Moving or Downsizing?

Selling or Moving Your Plant?

Call Us At 818.508.7034

GRINDERS/SANDERS, PANTOGRAPH MACHINES, MATERIAL HANDLING,ROLLING STOCK, AIR HANDLING, & MUCH MORE!

LIVEON-SITE &WEBCAST March 14, 2006

COMPLETE STATE-OF-THE-ART CNC MOLD MAKING & MACHINING FACILITY

FEATURING VERTICAL MACHINING CENTERS, YEAR 2000’S HORIZONTAL BORING MILLS AND EDMS

WEBCASTCan’t attend the auction in person? You can participate and bid in real time via the Internet. Preview assets with detailed digital photos, lot catalogs, and in-depth descriptions.

For more information, visit www.BIDITUP.com

Please note, all webcast participants must submit a 25% deposit and signed registration forms no later than 24 hours before a sale.

For a Complete Listing of Upcoming Auctions, Visit www.BIDITUP.com. Register Online and Receive

Auction Updates & Information via E-Mail.

COMPLETE STATE-OF-THE-ART CNC MOLD MAKING & MACHINING FACILITY

FEATURING VERTICAL MACHINING CENTERS, YEAR 2000’S HORIZONTAL

BORING MILLS AND EDMSDiversified Engraving,

Stamp and Machine Co., LLC

Tuesday, March 14, 2006Akron, OH

FOR THE COMPLETE TERMS & CONDITIONS OF THIS AUCTIONPlease visit our website - www.BIDITUP.com

11426 Ventura BlvdSecond FloorStudio City, CA 91604Phone - 818.508.7034Fax - 818.508.3025info@biditup.comSteven R. Mattes, AuctioneerAuctioneer OH License #2005000217Auctioneer Corporation License #2005000218

Tuesday, March 14, 2006Beginning at 10:00 AM EST

Monday, March 13, 20069:00 AM to 4:00 PM EST

1100 Evans AvenueAkron, OH 44305(See pg 5 for Directions & Lodging)

4.1” TOS Table Type Horizontal Boring Mill

Okuma Howa 55V Vertical Machining Centers Hansvedt RAM Type EDMs Fadal VMC2216 CNC Vertical Machining Centers

MACHINERY AUCTION, LOOK INSIDE!

ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER

Diversified Engraving, Stamp and Machine Co., LLC

2000