Lite Indicator Admin Manual

8/3/2019 Lite Indicator Admin Manual

1/16

Weighing Software LiteIndicator Ver 5.5A weighing software, fastest, smallest and full with featuresWebsite & Download : http://LiteIndicator.com/Email Inquiry :[email protected]

A Weighing Software / Weighbridge Software / Scale System on Windows for Weighing Vehicle orgoods in Construction, Agriculture / Livestock, Production / Manufacturing, Transportation etc.

It is easy to use. Install to your Microsoft Windows computer and link it with any Digital WeighingScale / Indicator or Weighbridge, it helps store data and weight in database and print them. It

captures weight and store data or information you key in, example: Time, Vehicle No, Driver, Customeror Vendor, Product, Transporter, Driver, Location, Barcode and User Define Item.

It is the most advanced, user friendly and flexible software. The only software that can auto detect anyDigital Weighing Scale / Indicator or Weighbridge. The only weighing software that support User DefineItem, User Define Screen and User Define Report. It support Multi Language and being the fastest andsmallest as it is program using C++, not using slow and large .NET or Java.

Below are LiteIndicator features.1. It is most user friendly as it uses Windows. Able to use both mouse and keyboard.

2. The only software that connect automatically all type of Digital Weighing Scale / Indicator orWeighbridge (Universal). So that you do not have to know about baud rate, parity, data bit, stop bit, etc.

3. Very flexible, you can customize / define your own Item and Screen.4. Also Able to customize / define your own Report easily. Reports include Ticket Report, Daily Report,

Customer Report, Product Report, Invoice etc.5. Support Multi Language, example English, Chinese, Polish, Spanish, Hindu, Malay, Arabic, Polish, Thai etc.

6. Support Axle Weighing where each axle is weight individually to get the total weight.7. It supports Windows XP, Windows Vista, Windows 7. Also Windows 2000 and Windows 98 Second

Edition.8. It has Standard Version use in Weighbridge for truck in Construction, Agriculture / Livestock,

Manufacturing Version use in Production Line where each weight auto print a ticket / label, andManufacturing Barcode Version is use to get weight of a product while reading the barcode.

9. Very small (only 1.9MB) and Very fast. (Because program using C++ and running the fastest SQLdatabase) Can run on slow and old computers (no need to purchase expensive fast computer)

10. Support barcode reading and printing.11. Able to export data to Microsoft Excel.

12. When keying in data, system auto complete the rest of the text. Making keying in data faster.

13. Automatic backup, can choose where to backup in any interval days.14. We own the code, therefore you are dealing straight from provider, so no worries in getting bestservice, support and price.

Authorized Distributor

Website & Download :

http://LiteIndicator.com/Inquiry :[email protected]

1
http://liteindicator.com/mailto:[email protected]://liteindicator.com/mailto:[email protected]://liteindicator.com/mailto:[email protected]://liteindicator.com/mailto:[email protected]


2/16

Table of Contents

Minimum Requirement ................................................................................................................................. 3

Setting ............................................................................................................................................................ 3

2


3/16

Minimum Requirement

The minimum requirement to run this software on a computer system is:

- Windows XP, Windows 2000, Windows 98 Second Edition, Windows Vista

and Windows 7- Any machine that can run Microsoft Windows.- 64 MB RAM- 2 MB Hard Disk Space- Serial Port for connection to the weighing indicator (weight bridge)

Setting

- This Admin Manual is use by weighbridge supplier / software supplier.

Customers are not advice to use this. As there are settings that are not to bechange by the customer them self.- weighbridge supplier / software supplier should set the Admin Password inthe s. Setting > 2. Language . Dont leave the Admin Password empty.Leaving them empty will allow customer to change settings that they do notunderstand. And this will bring trouble.

3


4/16

1.1 Language and Other

- Supervisor password is needed when delete ticket, change ticket weightand change old ticket information.

- Manager password is needed to access Setting.- Admin password is needed to have full access in Setting. (Example:

Auto Detect Indicator, Set Company Name, etc.

- Single Weighing By default it is double weighing. (Vehicle is weigh 2times)

- Ticket below is the ticket running number.- Date Format is use in report, the date format on the screen will follow

the Microsoft Windows date format.

1.2 Export to Excel

- Choose the date range to export to Microsoft Excel- The date shown follows the Windows date format.

4


5/16

1.3 Import to Master Table

- Choose the type of data you want to import.- Copy and Paste the data to the empty box then click Import- Maximum length is 50 character, except for vehicle (20 character)

5


6/16

1.4 Delete Ticket

- Choose the date range to delete ticket.- The date shown follows the Windows date format.

1.5 Auto Detect Indicator

- Make sure you keep changing the weight until you see the correct weightrunning down the screen. (Should be detected in less than 1 minutes)

- (Note : If not detected, check cable. Can also use Windows HyperTerminalto check if there are signal.)

6


7/16

1.6 Manual Detect Indicator

- You can also do it manually if you know the setting of the digital indicator.Use HyperTerminal to check the signal.

1.7 Set Company Name

- Company Name is use in the licensing. A matching Serial No will be givenonce purchased. Remember that the Company Name will be printed in theTicket and Reports.

7


8/16

1.8 Set Report

- Print out are split to 2, Ticket and Reports. You can customize the printout format.

- Below is the Ticket print out format. You can move them around, deletethe one that you dont need and edit them. (Example, you can change theaddress)

- Internet connection is needed to save this.- To increase the length of the boxes, move your mouse to the lower right

corner and drag. Also works on top left corner of the box.- To move the box, move your mouse to the middle of the box and drag.

1.9 Set Screen

- You can customize the Input Screen.

8


9/16

- Choose the correct screen to change.

- You arrange the screen the way you want.- You can remove or add any item.- Please not remove the needed item like Save, Exit button, etc.- Always backup all files before making changes.- Do not change the words in the , it is fixed. To change the word that

you want, then goto Setting > Set Language and change here.

9


10/16

2.0 Setup

2.1 Printing Setup

- Due to most of customer use Ticket Size which is Halfof Letter Size.Below are the step

- > >- Find Letter (The size is 8.5in x 11in), we need to create a new form with

size 8.5in x 5.5in

10


11/16

11


12/16

- Tick on Create a new form, then Change to Letter Half.- Change 11.00in to 5.5in then click OK.

- Goto to properties of your printer. (right click, thenProperties)- There are 2 places you have to change the paper size Printing

Defaults and Printing Preferences

12


13/16

- Change the Paper Size from Letter to Letter Half.

13


14/16

2.2 Setup Panasonic KXP-1121 Printer to print faster

- Some printer default printing is using Single Direction printing (UNI).You can change to Bi-Directional printing. In Bi-Directional printing, itwill print when the print head move from left to right and right to left.So printing will be faster.

- To change this, follow the step below

- The printer come with a disk. Open the Setup.exe (If you dont have thedisk, download from http://liteindicator.net16.net/KXP1121DosDriver.zip)

- Change the Graphic direction from UNI to BI. Then press Enter.

14
http://liteindicator.net16.net/KXP1121DosDriver.ziphttp://liteindicator.net16.net/KXP1121DosDriver.zip


15/16

2.3 Remote Support via Internet

- We can remote support via Internet, to trouble shoot your problem fast.(Note: remote support cannot function if your computer is using proxyserver to access internet)

- Schedule with us a date and time of your preference and email to us [email protected] (Then wait for the email reply to confirm)

- When it is time, open http://liteindicator.net16.net/RemoteSupport.zip- Then Double click as shown below.- We then able to see your screen and trouble shoot the problem.

2.4 Setup Serial Cable

- Now a days, laptop does not come with Serial Port. But desktop doescome with Serial Port. So that you can connect to the digital weightindicator. (if you still want to use a laptop, buy a usb to serial adapter,but some are not stable)

- To link the computer with the digital weight indicator. You will need atleast 3 cable. Below is a diagram on which pin to connect. Remember touse female connector on both end. (Dont use male connector)

- There are 2 type of serial connector, 25 pin and 9 pin. Both can be use.For 25 pin, remember to use number 7 instead of number 5.

15
mailto:[email protected]://liteindicator.net16.net/RemoteSupport.zipmailto:[email protected]://liteindicator.net16.net/RemoteSupport.zip


16/16

2.5 Payment using Credit Card via Paypal

- To make Credit Card payment via Paypal for the software, go tohttp://liteindicator.net16.net/1_8_Purchase.html

- Then click on Buy Now

- Key in Unit Price and Quantity as per agreed earlier. Click UpdateTotals, then continue checkout.

- After that, key in your credit card information.

16
http://liteindicator.net16.net/1_8_Purchase.htmlhttp://liteindicator.net16.net/1_8_Purchase.html

Documents

Lite Indicator Admin Manual