Projects List1. A Fast-Acting DC-Link Voltage Controller for Three-Phase DSTATCOM to Compensate AC and DC Loads.2. Grid Interconnection of Renewable Energy Sources at the Distribution Level with Power- Quality Improvement Features.

3. Real-Time Implementation Of Anfis Control For Renewable Interfacing Inverter In 3p4w Distribution Network.

4. Power System Stability Enhancememnt Under Three Phase Fault With Facts DevicesTcsc, Statcom And Upfc.

5. An Improved Maximum Power Point Tracking for Photovoltaic Grid-Connected Inverter Based on Voltage-Oriented Control.

6. High Boost Ratio Hybrid Transformer DCDC Converter for Photovoltaic Module Applications.

7. Intentional Islanding Operation Of Distribution System With Load Shedding Algorithm.

8. Co-Ordinated Control And Energy Management Of Distributed Generation Inverters In A Micro Grid.

9. Fuzzy Logic Controlled Shunt Active Power Filter For Reactive Power Compansation And Harmonic Elimination.

10. A Voltage-Controlled PFC Cuk Converter-Based PMBLDCM Drive for Air-Conditioners.

11. A Novel Approach To Determine The Optimal Location Of Sfcl In Elictric Power Grid To Improve Power System Stability.

12. Fault Current Interruption By The Dynamic Voltage Restorer.

13. A Hybrid HVDC Transmission System Supplying a Passive Load.

14. Modeling and Control of a Multi-Machine Power System with FACTS Controller.

15. Grid connected solar system with PWM operated 13 level inverter using digital PI controller.

16. Modeling and Simulation of a Distribution STATCOM (D-STATCOM) for Power Quality Problems-Voltage Sag and Swell Based on Sinusoidal Pulse Width Modulation (SPWM)

17. Advanced Active Power Conditioner to Improve Power Quality in Micro grids.

IEEE Projects List

1. Grid Interconnection of Renewable Energy Sources at the Distribution Level with Power- Quality Improvement Features

2. An Inrush Mitigation Technique of Load Transformers for the Series Voltage SagCompensator.

3. Induction Motor Drive Using Seven Levels Multilevel Inverter for Energy Saving InVariable Torque Load Application

4. Power Quality Improvement in Conventional Electronic Load Controller for an IsolatedPower Generation

5. Estimation and Mitigation of Voltage and Current Harmonics in Distribution Systems

6. A Minimal Harmonic Controller for a Statcom

7. Analysis of a Distributed Grid-Connected Fuel Cell during Fault Conditions

8. Fault Location for a Series Compensated Transmission Line Based On WaveletTransform and an Adaptive Neuro-Fuzzy Inference System

9. Improvement of the Electric Power Quality Using Series Active and Shunt Passive Filters

10. Unied Tuning Of PID Load Frequency Controller for Power Systems via IMC

11. DTC-SVM Scheme for Induction Motors Fed With a Three-Level Inverter

12. Simulation by Matlab/Simulink of Active Filters for Reducing THD Created ByIndustrial Systems13. Development of a Grid-Connected Wind/PV/Bess Hybrid Distributed Generation System

14. High Performance Control of a Single-Phase Shunt Active Filter

15. A 24-Pulse Ac-Dc Converter Employing a Pulse Doubling Technique for VectorControlled Induction Motor Drives16. Improving Distribution System Performance with Integrated Statcom and Super capacitorEnergy Storage System

17. Switched-Capacitor/Switched-Inductor Structures for Getting Transformer less HybridDcDc PWM Converters

18. Zero-Voltage-Switching DcDc Converters with Synchronous Rectiers

19. Application of Synchronous Static Series Compensator (SSSC) On Enhancement ofVoltage Stability and Power Oscillation Damping

20. Coordinated Design of Thyristors Controlled Braking Resistors and Power SystemStabilizer for Damping Electro-Mechanical Oscillations

21. Improved Z-Source Inverter with Reduced Z-Source Capacitor Voltage Stress and Soft- Start Capability

22. A Single Stage Induction Heating High Frequency Series Load Resonant ZVS-PWM Inverter with Active Filtering PFC Rectifier Operating At One Diode Conduction and ZCS Commutation

23. A New Approach to Multifunctional Dynamic Voltage Restorer Implementation forEmergency Control in Distribution Systems

24. A Versatile Control Scheme for UPQC For Power Quality Improvement

25. Fault Detection and Mitigation In Multilevel Converter STATCOMs

26. Grid Interconnection of Renewable Energy Sources at the Distribution Level with Power- Quality Improvement Features27. Induction Motor Drive Using Seven Level Multilevel inverter for Energy Saving inVariable Torque Load Application

28. A Hybrid Ac/Dc Microgrid and Its Coordination Control

29. Enhancement of Power Quality in Distribution system Using D-Statcom

30. A modied C-Dump Converter for BLDC Machine Used in a Flywheel Energy StorageSystem

31. A New Multilevel Inverter Topology Using Less Number of Switches

32. A Single Phase Five Level Inverter for Grid Connected Photovoltaic System byEmploying PID Controller

33. Improving Grid Power Quality with Facts Device on Integration of Wind Energy System

34. Simulation and Analysis of A Multilevel Converter Topology for Solar PV Based GridConnected Inverter

35. A Shunt Active Power Filter with Enhanced Performance Using Ann-Based Predictive and Adaptive Controllers

36. Enhanced Power Quality Control Strategy for Single-Phase Inverters In DistributedGeneration Systems

37. Grid Interconnection of Renewable Energy Sources at the Distribution Level with Power- Quality Improvement Features

38. Active Power Filter Based On Cascaded Transformer Multilevel Inverter.

39. A STATCOM-Control Scheme for Grid Connected Wind Energy System for PowerQuality Improvement.40. A Novel Online Fuzzy Control Method of Static VAR Compensation for an effectiveReactive Power Control of Transmission Lines.

41. A Novel Three-Phase to Five-Phase Transformation Using a Special TransformerConnection.

42. Direct Torque Control for Doubly Fed Induction Machine-Based Wind Turbines UnderVoltage Dips and Without Crowbar Protection.

43. A FACTS Device: Distributed Power-Flow Controller (DPFC).

44. Enhancement of Power Quality in Distribution System Using D-STATCOM.

45. Power-Management Strategies for a Grid-Connected PV-FC Hybrid System.

46. Super capacitors and Battery power management for Hybrid Vehicle Applications Using multi boost and full bridge Converters.

47. Implementation and Control of a Hybrid Multilevel Converter with Floating DC-links forCurrent Waveform Improvement.

48. Ripple Current Reduction of a Fuel Cell for a Single-Phase Isolated Converter Using aDC Active Filter with a Center Tap.

49. Enhancement of Micro turbine-Generator Output Voltage Quality through Application ofMatrix Converter Interface.

50. A New 84-pulse VSC Configuration Using Multi-Level DC Voltage Reinjection forEspecial Applications.

51. An Inrush Mitigation Technique of Load Transformers for the Series Voltage SagCompensator.

52. Novel Direct Torque Control Based on Space Vector Modulation with Adaptive StatorFlux Observer for Induction Motors.

53. Wind Farm to Weak-Grid Connection using UPQC Custom Power Device.

54. Single-Phase to Three-Phase Drive System Using Two Parallel Single-Phase Rectifiers.55. A Fuzzy Rule-Based Approach for Islanding Detection in Distributed Generation.

56. Design of a Hybrid PID plus Fuzzy Controller for Speed Control of Induction Motors.

57. A 28-Pulse AC-DC Converter Based SMPS for Telecom Power Supply.

58. A Voltage Controlled Adjustable Speed PMBLDCM Drive using A Single-Stage PFC Half-Bridge Converter.

59. Instantaneous Power Control of D-STATCOM with Consideration of Power FactorCorrection.

60. Modeling of FACTS Devices Based on SPWM VSCs

61. Modeling and real time simulation of Non-Grid Connected Wind Energy conversion system62. Design and analysis of dynamic voltage restorer for deep voltage sag and harmonic compensation.

63. A high Performance Induction motor drive systems using fuzzy logic controller.

64. Instantaneous Power Control of D-STATCOM with Consideration of Power FactorCorrection

65. Transient stability control of TCSC

66. A New Adaptive Fuzzy Vector Control for Permanent Magnet Synchronous Motor Drive.

67. Fuzzy logic control of a variable speed induction machine wind generation system.

68. Study of HVDC Light for its Enhancement of AC/DC Interconnected TransmissionSystems.

69. DTC-SVM Scheme for Induction Motor Fed with a Three-Level Inverter.

70. Switching Losses Analysis of a DC Link Fuzzy Logic Controller Scheme Applied to aVSC.

71. A novel reference signal generation method for power quality improvement of UPQC.

72. A Fast-Acting DC-Link Voltage Controller for Three-Phase DSTATCOM to CompensateAC and DC Loads.

73. Performance Analysis of Fuzzy Logic Based Unified Power Flow Controller.

74. Control Scheme to Improve DPFC performance during Series Converter Failures.

75. Utilize Distributed Power Flow Controller to Compensate Unbalanced 3-Phase Currents in Transmission Systems.

76. Dc Link Current Minimization for High Power Current Source Motor Drives.

77. Wavelet fuzzy combined approach for fault classification of a series-compensated transmission line.

78. Allocation of TCSC Devices to Optimize Total Transmission Capacity in a CompetitivePower Market.

79. Fuzzy Logic Controller as Power System Stabilizer.

80. Simulation Analysis of DVR Performance for Voltage Sag Mitigations.

81. Fault-Location System for Multi-terminal Transmission Lines.