LIST OF STANDARDS

Standards Description Description ASME PTC1 - 2004 General Instructions PTC2 - 2001 Definitions and Values Code PTC4- 1998 Fired Steam Generators PTC4.2 - 1969 (R2003) Coal Pulverizers PTC4.3 - 1968 (R1991) Air Heaters PTC4.4 - 1981 (R2003) Gas Turbine Heat Recovery Steam

Generators PTC6 - 2004 Steam Turbines PTC6.2 - 2004 Steam Turbines in Combined Cycles PTC6A - 2001

Test Code for Steam Turbines - Appendix to PTC 6

PTC6-REPORT Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines

PTC6-S

Procedures for Routine Performance Test of Steam Turbines

PTC8.2 - 1990 Centrifugal Pumps PTC11 - 1984 (R2003) Fans PTC12.1 - 2000 Closed Feedwater Heaters PTC12.2 - 1998 Steam Surface Condensers PTC12.3 - 1997 (R2004) Deaerators PTC19.1 - 2005 Measurement Uncertainty PTC19.2 - 1987(R2004) Pressure Measurement PTC19.3 - 1974 (R1998) Temperature Measurement PTC19.5 - 2004 Flow Measurement PTC19.7 - 1980 (R1988) Measurement of Shaft Power PTC19.10 - 1981 Flue and Exhaust Gas Analyses-Part

10 PTC19.11 - 1997

(R2004) Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle

PTC19.23 - 1980 (R1985)

Guidance Manual for Model Testing

PTC 22 Standard specification for Gas Turbines fuel oils

PTC24 - 1976 (R1982) Ejectors PTC46 - 1996 Overall Plant Performance PTCPM - 1993 Performance Monitoring Guidelines for

Steam Power Plants LOS-1M-1980 Turbine lubrication system

ASTM D388 Classification of coals by rank D396 Specification for fuel oils D409 Test methods for grindability of coal by

Hardgrove Machine method D720 Test methods for free swelling index of

coal D1412 Test methods for equilibrium moisture

of coal at 96% to 97% RH & 30 degC D1756,1981 Standard test method for carbon

Dioxide in coal D1857,1981 Standard test method for fusibility of

coal & coke ash D2013 Method of preparing coal samples for

analysis D2015, 1981 Test method for GCV of coal & coke by

adiabatic bomb calorimeter D2234 Test methods for collecting a gross

sample of coal D2880 Gas turbine power plants D3173 Test methods for moisture in the

analysis sample of coal & coke D3174,1981 Test methods for ash in the analysis

sample of coal & coke from coal D3175 Test methods for volatile matter in the

analysis sample of coal & coke D3176,1981 Practice for ultimate analysis of coal &

coke D3177 Test methods for total sulfur in the

analysis sample of coal & coke D3286 Test method for GCV of coal & coke by

Isoperibol bomb calorimeter D3302 Test method for total moisture in coal D3483 Standard test methods for accumulated

deposits in Steam Generator D4371 Test methods for determining the

washability characteristics of coal D4749 Test method for performing the sieve

analysis of coal & designating coal size D5142 Test methods for proximate analysis of

the analysis sample of coal & coke by instrumental procedure

ANSI/ASME TDP-1, 1985 Prevention of water damage to steam

turbines used for Electric Power Generation

ANSI/ASME B31.1, 1986 Code for pressure piping, power piping

DIN 43760, Class-A Calibration & Accuracy of RTDs IEC 68-2-2 Dry Heat Test(Type test) 68-2-3 Damp Heat Test(Type test) 68-2-6 Vibration Test(Type test) 255-4 Surge Protections for solid state

equipment/systems 751 Calibration & Accuracy of thermocouple IEC 529 IP-55(Ingress

Protection) Weather & dust proof

IP-56 Protection against dust & heavy seas IP-65 Protection against dust tight & water

jets BS 37,1959 Electricity meters 132 Steam Turbines 599 Methods of testing Pumps 752,1974 Test code for Acceptance of Steam

Turbines 759 Valves Gauges & other safety fittings

for application to Boilers & to piping installations for and in connection with Boilers

893 Method for measurement of the concentration of particulate materials on ducts carrying gases

1016 Methods for analysis & testing of coal & Coke

1017 Methods for sampling coal & coke 1041 Code for temperature measurement 1042 Methods for measurement of fluid flow

in pipes 1780 Bourdon tube pressure & vacuum

gauges 1796 Methods for test sieving 2520 Barometer convention & tubes 2885(1974) Code for acceptance test on stationary

steam generators of the power station 3405 Simplified methods for measurement of

grit & dust emission 4485 Water cooling towers 4937 International Thermograph Reference

table

5316 Acceptance tests for centrifugal, mixed flows & axial pumps

5857 Methods for measurement of fluid flow in closed conduits using tracers

BIS 10391 Standard test methods for accumulated

deposits in Steam Generator 1350 Coal Sampling Analysis 8753 Method for Boiler Efficiency

Calculation(Loss method) ANSI C96.1-1984,Special

class Calibration & Accuracy of thermocouple

37.90a Surge Protections for solid state equipment/systems

IEEE 472 Surge Protections for solid state

equipment/systems EU EN 50081-2 Electromagnetic compatibility EN50082-2 Radio Frequency/Electromagnetic

Immunity Test EN61326-1(1997) Electromagnetic compatibility NFPA 85C,1993 Standard for Prevention of Furnace

Explosions/Implosions in Multiple burner boiler furnaces