65
© Lloyd’s Register Group Limited 2017. All rights reserved. This lists identifies forges approved by Lloyd’s Register Group Limited (LR) for the manufacture of steel forgings in accordance with the requirements of LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 5. The information listed for each forge is a summary and includes the types of steel and maximum approved forging weight. The types of steel include: carbon carbon-manganese alloy austenitic stainless martensitic stainless The list also includes firms approved for manufacturing using powder metallurgy. Where required further information should be obtained from the current certificate of approval issued to the manufacturer by LR. Works designated "MQS Approved" are also approved under the Materials Quality Scheme in accordance with LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 1 Section 2. Approval only covers the manufacturing location listed, it does not extend to other forges owned by the same company. The local LR surveying office is also listed. Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. List 3 List 3 List 3 List 3 Approved Manufacturers Approved Manufacturers Approved Manufacturers Approved Manufacturers of Steel Forgings of Steel Forgings of Steel Forgings of Steel Forgings As at 22 December 2017

List 3 Approved Manufacturers of Steel Forgings

Embed Size (px)

Citation preview

Page 1: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

This lists identifies forges approved by Lloyd’s Register Group Limited (LR) for themanufacture of steel forgings in accordance with the requirements of LR's Rules for theManufacture, Testing and Certification of Materials, Chapter 5.

The information listed for each forge is a summary and includes the types of steel andmaximum approved forging weight. The types of steel include:

carboncarbon-manganese alloyaustenitic stainlessmartensitic stainless

The list also includes firms approved for manufacturing using powder metallurgy.

Where required further information should be obtained from the current certificate ofapproval issued to the manufacturer by LR.

Works designated "MQS Approved" are also approved under the Materials Quality Schemein accordance with LR's Rules for the Manufacture, Testing and Certification of Materials,Chapter 1 Section 2.

Approval only covers the manufacturing location listed, it does not extend to other forgesowned by the same company.

The local LR surveying office is also listed.

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers,employees or agents are, individually and collectively, referred to in this clause as 'Lloyd'sRegister'. Lloyd's Register assumes no responsibility and shall not be liable to any person forany loss, damage or expense caused by reliance on the information or advice in thisdocument or howsoever provided, unless that person has signed a contract with therelevant Lloyd's Register entity for the provision of this information or advice and in thatcase any responsibility or liability is exclusively on the terms and conditions set out in thatcontract.

List 3List 3List 3List 3

Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

As at 22 December 2017

Page 2: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

AustriaAustriaAustriaAustria

45.00carbon ViennaForgingsBÖHLER EDELSTAHL GmbHBÖHLER EDELSTAHL GmbHBÖHLER EDELSTAHL GmbHBÖHLER EDELSTAHL GmbH45.00carbon-manganese45.00alloy

Tel: +43 3862 20 7274 Fax: +43 3862 20 37559 Email: mailto: [email protected] Web:http://www.bohler-edelstahl.comCertificate # MD00/0200/0004/3 Expiry date: 21/01/2018

Postfach 96A-8605 Kapfenberg

Mariazellerstraße 25

0.70carbon ViennaForgingsBÖHLER SCHMIEDETECHNIK GmbH & Co. KGBÖHLER SCHMIEDETECHNIK GmbH & Co. KGBÖHLER SCHMIEDETECHNIK GmbH & Co. KGBÖHLER SCHMIEDETECHNIK GmbH & Co. KG0.70carbon-manganese0.70alloy0.70austenitic stainless

Tel: +43 3862 20 6583 Fax: +43 3862 20 7634 email: :[email protected] web: www.bohler-forging.com

Certificate #: MD00/2062/0007/3 Expiry date: 21/01/2018

Ni-based alloys accepted for approved applications

Mariazellerstaße 25Postfach 96A-8605 Kapfenberg

5.00carbon ViennaForgingsSCHMIEDETECHNIK BREITENFELD GmbHSCHMIEDETECHNIK BREITENFELD GmbHSCHMIEDETECHNIK BREITENFELD GmbHSCHMIEDETECHNIK BREITENFELD GmbH5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless*

Tel +43 (0)3858 6161 231 Fax +43 3858 6161 248 Email: [email protected] Web: http://www.breitenfeld.atCertificate #: MD00/3257/0005/3 Expiry date: 06/06/2018

8662 St. Barbara im MürztalBreitenfelderstrasse 22

BelgiumBelgiumBelgiumBelgium

4.00carbon AntwerpForgingsARCELOR MITTAL RINGMILL SAARCELOR MITTAL RINGMILL SAARCELOR MITTAL RINGMILL SAARCELOR MITTAL RINGMILL SA4.00carbon-manganese4.00alloy

Tel: +32 (0) 4330 3578

E-mail: [email protected]

Website: www.arcelormittalringmill.be

Certificate Number: MD00/0327/0008/3 Expiry: 07/09/2020

B-4100 SeraingB.P. 65

0.37austenitic stainless AntwerpForgingsHERTECANT FLANGES N.V.HERTECANT FLANGES N.V.HERTECANT FLANGES N.V.HERTECANT FLANGES N.V.0.37duplex stainless*

Tel: +32 015 22 49 10 or +32 15229194 Fax: +32 015 22 55 88email::[email protected]: www.hertecantflanges.comCertificate #: MD00/0667/0007/3 Expiry date: 24/09/2019

Lossing 222260 Heultje-Westerlo

BrazilBrazilBrazilBrazil

20.00carbon Rio de JaneiroForgingsAÇOFORJA INDÚSTRIA DE FORJADOS S.A.AÇOFORJA INDÚSTRIA DE FORJADOS S.A.AÇOFORJA INDÚSTRIA DE FORJADOS S.A.AÇOFORJA INDÚSTRIA DE FORJADOS S.A.20.00carbon-manganese

Tel: +55 31 3649 1706 Fax: +55 31 3649 1717 M +55 31 8459 3220 EMail: mailto:[email protected]: www.acoforja.com.br Certificate #: MD00/3860/0003/3 Expiry date: 27/11/2016

Av. Engenheiro Januário Alvarenga Santos, No. 300Distrito Industrial Celso MelloSanta Luzia, MG, 33040-220

As at 22 December 2017 2Page

Page 3: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.15carbon São PauloForgingsTHYSSENKRUPP METALÚRGICA CAMPO LIMPO LTDA.THYSSENKRUPP METALÚRGICA CAMPO LIMPO LTDA.THYSSENKRUPP METALÚRGICA CAMPO LIMPO LTDA.THYSSENKRUPP METALÚRGICA CAMPO LIMPO LTDA.0.15carbon-manganese0.15alloy

Tel: +55 11 4039 9000 Fax: +55 11 4039 9911 Email: [email protected] Web: http://www.thyssenkrupp-metalurgica.comCertificate #: MD00/0898/0007/3 Expiry date: 02/03/2018

Av. Alfried Krupp 1050Campo Limpo Paulista, SPCEP 13231-900

0.08carbon São PauloForgingsTHYSSENKRUPP METALÚRGICA SANTA LUZIATHYSSENKRUPP METALÚRGICA SANTA LUZIATHYSSENKRUPP METALÚRGICA SANTA LUZIATHYSSENKRUPP METALÚRGICA SANTA LUZIA0.08carbon-manganese0.08alloy

Tel: +55 31 3649 5116 Fax: +55 31 3649 5040 Email mailto:[email protected]: http://www.thyssenkrupp-metalurgica.comHeat treatment is not covered in the scope of approvalCertificate #: MD00/2996/0004/3 Expiry date: 08/07/2015

Santa Luzia -MGMinas Gerais 33045-170CEP 33045-170

Av. Dr Ângelo Teixeira da Costa 2164

BulgariaBulgariaBulgariaBulgaria

10.00carbon SofiaForgingsRADOMIR METAL INDUSTRIES JSCRADOMIR METAL INDUSTRIES JSCRADOMIR METAL INDUSTRIES JSCRADOMIR METAL INDUSTRIES JSC10.00carbon-manganese

Tel: 359 77780489 Fax: 359 77782134email: [email protected] web: radomir-metal-industries.com

Certificate No: MD00/4386/0001/3 Expiry Date: 17/09/2017

2400 Radomir,

CanadaCanadaCanadaCanada

15.00carbon TorontoForgingsCANADA FORGINGS INC.CANADA FORGINGS INC.CANADA FORGINGS INC.CANADA FORGINGS INC.15.00carbon-manganese

Tel: +1 905 735 1220 Fax: +1 905 735 6992 Email mailto:[email protected] Web http://www.canforge.comCertificate #: MD00/3253/0004/3 Expiry date: 03/08/2018

130 Hagar StWellandOntario L3B 5P8

P.O. Box 308

ChileChileChileChile

2.50carbon ValparaisoForgingsFORJADOS S.A.FORJADOS S.A.FORJADOS S.A.FORJADOS S.A.2.50carbon-manganese2.50alloy

Tel: +562 7511500 Email: [email protected] Web page: www.forjados.clApproval is restricted to shaft and shaft type forgings to 460mm diameter and nominal 3500mm length to maximum weight shown above.Mechanical testing is carried out by approved test houses.Certificate Number: MD00/3787/0003/3 Expiry date: 16/05/2019

Camino Santa Rosa S/NParcela 6 Ruta G-154Lampa - Santiago

China, People's Republic ofChina, People's Republic ofChina, People's Republic ofChina, People's Republic of

90.00carbon DalianForgingsANGANG HEAVY MACHINERY CO., LTD.ANGANG HEAVY MACHINERY CO., LTD.ANGANG HEAVY MACHINERY CO., LTD.ANGANG HEAVY MACHINERY CO., LTD.90.00carbon-manganese90.00alloy

Tel: +86 412 6765212/6765217 Fax: +86 412 6765218 Email to: [email protected] Web http://www.angangzhongji.com.cnIncluding semi-built crankshafts (max. throw weight 14 tonnes)Certificate #: MD00/3471/0007/3 Expiry date: 19/05/2020

West side of Hongqi RoadAnshan, Liaoning Province114042

STEEL FORGING PLANT

As at 22 December 2017 3Page

Page 4: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.11carbon DalianForgingsANSHAN SINOKOR FLANGE CO., LTD.ANSHAN SINOKOR FLANGE CO., LTD.ANSHAN SINOKOR FLANGE CO., LTD.ANSHAN SINOKOR FLANGE CO., LTD.0.11carbon-manganese0.11austenitic stainless

Tel: +86 412 2321511 Fax: +86 412 2321522Email: [email protected]: www.sinokor-flange.comCertificate #: MD00/3487/0005/3 Expiry date: 05/01/2020

Qianshan DistrictAnshan CityLiaoning Province

Anshan ChengDong Anshan Town

4.60carbon JiangyinForgingsAVIC EXCELLENCE FORGING (WUXI) Co., Ltd.AVIC EXCELLENCE FORGING (WUXI) Co., Ltd.AVIC EXCELLENCE FORGING (WUXI) Co., Ltd.AVIC EXCELLENCE FORGING (WUXI) Co., Ltd.4.60carbon-manganese4.60alloy

Tel: +86 510 83896510 Fax: +86 510 83896512email [email protected]: www.avic-zy.com

Certificate #: MD00/4086/0002/3 Expiry date: 04/11/2018

Wuxi City,Jiangsu Province,

Yuqi Town,

46.00carbon ZhoushanForgingsBAODING TECHNOLOGY CO., LTD.BAODING TECHNOLOGY CO., LTD.BAODING TECHNOLOGY CO., LTD.BAODING TECHNOLOGY CO., LTD.46.00carbon-manganese46.00alloy2.00austenitic stainless

Tel: +86 (0)571 8638 2518 Fax: +86 (0)571 8638 0688 Mobile: +86 115805819566email: [email protected] web: www.baoding-tech.com

Certificate #: MD00/3177/0006/3 Expiry date: 15/07/2020

Industrial Park of Tangqi Town,Yuhang District, Hanzhou City,Zhejiang Province

Hangzhou

0.02carbon JiangyinForgingsBOEN ENTERPRISES Co., LtdBOEN ENTERPRISES Co., LtdBOEN ENTERPRISES Co., LtdBOEN ENTERPRISES Co., Ltd0.02carbon-manganese0.02alloy

Tel: +86 510 87057901 Fax ? +86 510 87057900 Email: [email protected] ; [email protected]; http://www.boen.cnCertificate No. MD00/4033/0001/3 Expiry date: 11.06.2015

Yixing Economic Development Zone,Yixing City,Jiangsu Province,

No. 66 Qing-Yuan Road,

0.62alloy QingdaoForgingsBUCC (TIANJIN) PRESSURE EQUIPMENTBUCC (TIANJIN) PRESSURE EQUIPMENTBUCC (TIANJIN) PRESSURE EQUIPMENTBUCC (TIANJIN) PRESSURE EQUIPMENT

Tel: 86 22 24366600 Fax: 86 22 24366066Email: [email protected]

Approved for quench and tempered seamless pressure vessels manufactured by pipe spinning process to BS EN 14359-2006Maximum approved dimensions = 223mm o/d x 9.5mm w/t.

Certificate No. MD00/4355/0002/3 Expiry date: 01/07/2020

No. 15 baocang RoadJunliangcheng Industrial Parkdongli District, Tianjin, 300301

MANUFACTURING CO., LTD.

3.50carbon JiangyinForgingsCHANGZHOU KANGNING FORGING CO., LTD.CHANGZHOU KANGNING FORGING CO., LTD.CHANGZHOU KANGNING FORGING CO., LTD.CHANGZHOU KANGNING FORGING CO., LTD.3.50carbon-manganese3.50alloy1.10austenitic stainless

Tel: +86 519 86217231 Fax: +86 519 8823 6965 Email: [email protected] Web: http://www.czknda.comCertificate #: MD00/4620/0001/3 Expiry date: 06/10/2019

Fonggou Village, Xueyan TownWujin District, Chanzhou CityJiangsu Province, 213171

135.00carbon WuhanForgingsCHINA ERZHONG GROUP (DEYANG)CHINA ERZHONG GROUP (DEYANG)CHINA ERZHONG GROUP (DEYANG)CHINA ERZHONG GROUP (DEYANG)135.00carbon-manganese80.00alloy

As at 22 December 2017 4Page

Page 5: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +86 838 2341754 Fax: +86 838 2340690 Email: [email protected] www.china-erzhong.comCertificate #: MD00/1334/0010/3 Expiry date: 19/11/2018

460#, Zhujiang Xi Road,Deyang,Sichuan Province

HEAVY INDUSTRIES CO., LTD.

70.00carbon DalianForgingsCHINA FIRST HEAVY INDUSTRIESCHINA FIRST HEAVY INDUSTRIESCHINA FIRST HEAVY INDUSTRIESCHINA FIRST HEAVY INDUSTRIES70.00carbon-manganese70.00alloy

Tel +86 452 681 1689 Fax +86 452 681 1168Email: [email protected]: www.cfhi.comIncluding semi-built crankshaftsCertificate #: MD00/3186/0005/3 Expiry date: 03/09/2017

Qiqihar CityHeilongjiang Province

Fularji District

2.00carbon WuhanForgingsCHONGQING CHANGZHENG HEAVY INDUSTRY CO LTD.CHONGQING CHANGZHENG HEAVY INDUSTRY CO LTD.CHONGQING CHANGZHENG HEAVY INDUSTRY CO LTD.CHONGQING CHANGZHENG HEAVY INDUSTRY CO LTD.2.00carbon-manganese2.00alloy

Tel: +86 23 6156 4630 Fax: +86 23 6156 3019 Email: mailto:[email protected]: www.csiccq.comCertificate #: MD00/2246/0006/3 Expiry date: 22/08/2016

Da Du KouChongqing

Fu Niu Xi

28.00carbon WuhanForgingsCHONGQING DADI HEAVY INDUSTRY MACHINERY CO., LTD.CHONGQING DADI HEAVY INDUSTRY MACHINERY CO., LTD.CHONGQING DADI HEAVY INDUSTRY MACHINERY CO., LTD.CHONGQING DADI HEAVY INDUSTRY MACHINERY CO., LTD.28.00carbon-manganese28.00alloy

Tel: +86 23 6771 6971 Fax: +86 23 6771 6992 Web: www.cqdfdy.com Certificate Number: MD00/4005/0002/3 Expiry date: 03/04/2018

No. 99, East Gangcheng RoadJiangbei DistrictChongqing 400026

0.01carbon WuhanForgingsCHONGQING QINGLING FORGING Co., Ltd.CHONGQING QINGLING FORGING Co., Ltd.CHONGQING QINGLING FORGING Co., Ltd.CHONGQING QINGLING FORGING Co., Ltd.0.01carbon-manganese0.01alloy

Tel: +86 23 65267844 Fax: +86 23 65267844

Certificate #: MD00/3223/0004/3 Expiry date: 23/03/2018

ZhongliangshanJiulongpo DistrictChongqing

22.00carbon WuhanForgingsCHONGQING YANLIAN HEAVY MACHINERY EQUIPMENT CO.CHONGQING YANLIAN HEAVY MACHINERY EQUIPMENT CO.CHONGQING YANLIAN HEAVY MACHINERY EQUIPMENT CO.CHONGQING YANLIAN HEAVY MACHINERY EQUIPMENT CO.LTD.LTD.LTD.LTD.

22.00carbon-manganese

22.00alloy

Tel No. 0086 23 4726 7901 Fax No. 0086 23 4726 7922 Mob 15823453530Email: [email protected]: www.cqyanlian.comcert no. MD00/3641/0003/3 expiry date 29/03/2018

Degan Industrial ParkJiangjin,Chongqing 402284

20.00carbon WuhanForgingsCITIC Heavy Industries Company Ltd.CITIC Heavy Industries Company Ltd.CITIC Heavy Industries Company Ltd.CITIC Heavy Industries Company Ltd.20.00carbon-manganese

Tel: +86 (0)379 64088614 Fax: +86 (0)379 64086221 email [email protected] Web http//:www.citichc.com.Certificate #: MD00/2742/0006/3 Expiry date: 18/10/2018

Jianxi DistrictLuoyang CityHenan Province 471039

No. 206 Jianshe Road

10.00carbon WuhanForgingsCRRC ZIYANG CO., LTD.CRRC ZIYANG CO., LTD.CRRC ZIYANG CO., LTD.CRRC ZIYANG CO., LTD.10.00carbon-manganese8.50alloy

As at 22 December 2017 5Page

Page 6: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +86 028 26282693 Fax: +86 028 26653416email: [email protected] web: www.zyloco.com

Including CGF crankshafts with K factor = 1.05 for approved applications.Certificate #: MD00/3037/0006/3 Expiry date: 25/11/2017

Sichuan ProvincePost No. 641301

Ziyang City

1.80carbon NanjingForgingsCSSC NANJING LUZHOU MACHINE CO., LTD.CSSC NANJING LUZHOU MACHINE CO., LTD.CSSC NANJING LUZHOU MACHINE CO., LTD.CSSC NANJING LUZHOU MACHINE CO., LTD.1.80carbon-manganese1.80alloy

Tel No. +86 25 84769250 Fax No. +86 25 86725609Email: [email protected] luzhou.com.cnCertificate No MD00/3537/0003/3 Expiry Date 30/06/2018

Zhong Hua Men Wai,Nanjing,PC210039

3.00carbon DalianForgingsDALIAN CHUANXIN FORGING CO LTDDALIAN CHUANXIN FORGING CO LTDDALIAN CHUANXIN FORGING CO LTDDALIAN CHUANXIN FORGING CO LTD3.00carbon-manganese3.00alloy

Tel No: +86 411 39706151 Fax No: +86 411 39706151

Email: [email protected]

Certificate No: MD00/3845/0003/3 Expiry Date 08/10/2019

Liang-jia-dian Street, Free Trade Zone,Dalian,

Beicang Tun No 72,

2.30carbon DalianForgingsDALIAN CITY JINZHOU JINTAI FORGE FACTORYDALIAN CITY JINZHOU JINTAI FORGE FACTORYDALIAN CITY JINZHOU JINTAI FORGE FACTORYDALIAN CITY JINZHOU JINTAI FORGE FACTORY2.30carbon-manganese2.30alloy

Tel: +86 411 87854358 Fax: +86 411 87854358email: : [email protected] No: MD00/4640/0002/3 Expiry date: 12/12/2019

Jinzhou District,Liaoning Province

Friendship Street,Longwangmiao Village,

0.02carbon DalianForgingsDALIAN DV VALVE CO., LTD.DALIAN DV VALVE CO., LTD.DALIAN DV VALVE CO., LTD.DALIAN DV VALVE CO., LTD.0.02carbon-manganese0.02alloy

Tel: +86 411 864 22999 Fax: +86 411 864 22577 Email: [email protected] Web www.dldv.com.cn Certificate Number: MD00/3138/0005/3 Expiry date: 06/02/2020

No. 272 Yaojia StreetNanguanling, Ganjingzi DistrictDalian 116037

Dalian Daduan Forging Co., Ltd.

10.00carbon DalianForgingsDALIAN HEAVY FORGING Co,. LTDDALIAN HEAVY FORGING Co,. LTDDALIAN HEAVY FORGING Co,. LTDDALIAN HEAVY FORGING Co,. LTD10.00carbon-manganese5.50alloy

Tel: + 86-0411-39255371 Fax: +86-0411-39268607

E-mail: [email protected]

Certificate No: MD00/4689/0001/3 Expiry Date: 19/06/2020

Dalian Economic and Technical Development Area,Liaoning Province. 116600

0.14carbon DalianForgingsDALIAN HONGQI FORGING & PRESS FACTORYDALIAN HONGQI FORGING & PRESS FACTORYDALIAN HONGQI FORGING & PRESS FACTORYDALIAN HONGQI FORGING & PRESS FACTORY0.14carbon-manganese0.14alloy0.14austenitic stainless

Tel: +86 411 8428 8865 Fax: +86 411 8428 8863 Email: [email protected] Web: http://www.hqdy.comCertificate Number: MD00/3948/0003/3 Expiry: 17/09/2020

Tangli Village, Hongqi Street,Ganjingzi District,Dalian, 116021,

8.50carbon WuhanForgingsDAYE SPECIAL STEEL CO., LTD.DAYE SPECIAL STEEL CO., LTD.DAYE SPECIAL STEEL CO., LTD.DAYE SPECIAL STEEL CO., LTD.8.50carbon-manganese8.50alloy

As at 22 December 2017 6Page

Page 7: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +86 (0) 714 629 7888 Ext. 3729 Fax: +86 7147 629 7781 Email [email protected] Web: http://www.xinyrgang.comCertificate Number: MD00/2493/0002/3 Expiry: 14/07/2019

Huangshi CityHubei ProvincePost code: 435001

316 Huangshi Avenue

42.70carbon ZhoushanForgingsDEQIAN HANGZHONG FORGING CO. LTD.,DEQIAN HANGZHONG FORGING CO. LTD.,DEQIAN HANGZHONG FORGING CO. LTD.,DEQIAN HANGZHONG FORGING CO. LTD.,42.70carbon-manganese42.70alloy

Tel no. +86 0571 58619938 Fax no. +86 0571 58619939Email: [email protected]: www.dqforging.comCertificate No: MD00/3868/0004/3 Expiry Date 27/06/2019

Lin'an CityHangzhou,Zhejiang Province, 311305

No. 8, Jingguan Avenue, Qingshan Economic Development Zone,

26.00carbon DalianForgingsDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUP26.00carbon-manganese26.00alloy

Tel: +86 452 680 1271 Fax: +86 452 680 1234 email: [email protected] web: bg.bmsteel.com

Certificate No: MD00/2907/0006/3 Expiry date: 27/07/2020

Qiqihar CityHeilongjiang Province

BEIMEN SPECIAL STEEL CO., LTD.Fularji District

8.00carbon DalianForgingsDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUP8.00carbon-manganese8.00alloy

Tel no: +86 413 668 9161 - 3668 Fax no: +86 413 6674090Web www.dtsteel.comCertificate No: MD00/3945/0003/3 Expiry date: 04/09/2020

Wanghua District,Fushun City,Liaoning Province

FUSHUN SPECIAL STEEL CO. LTD.,East No 8 Anshan Road,

53.50carbon DalianForgingsDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUP53.50carbon-manganese17.00alloy

Tel: +86 0411 626 93145 Fax: +86 0411 626 93037web: www.dsteel.com

Certificate No: MD00/4651/0001/3 Expiry Date: 11/01/2020

Dalian Dengshahe Coastal Industrial Zone,Jinzhou New District,Dalian, Liaoning Province,

DALIAN SPECIAL STEEL CO., LTD.No. 18 South Hebin Road,

0.02carbon WuhanForgingsDONGFENG FORGING CO., LTD.DONGFENG FORGING CO., LTD.DONGFENG FORGING CO., LTD.DONGFENG FORGING CO., LTD.0.02carbon-manganese0.02alloy

Tel: +86 379 6407 6206 Fax: +86 379 6407 6206 Email to: [email protected] Approved as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. onlyCertificate #: MD00/3502/0003/3 Expiry date: 25/07/2017

7# Liaoning Road, Shiyan CityHubei Province

0.35carbon-manganese NantongForgingsDongtai QB Stainless Steel Co., Ltd.Dongtai QB Stainless Steel Co., Ltd.Dongtai QB Stainless Steel Co., Ltd.Dongtai QB Stainless Steel Co., Ltd.0.35alloy0.35austenitic stainless0.35duplex stainless0.05martensitic stainless*

Tel: +86 (0)515 85520679 Fax: +86 (0)515 85528688Email: [email protected]: www.qbfastener.comCertificate No. MD00/4670/0001/3 Expiry date: 23/02/2020

Zhouxia Industrial Park, Qindong Town,Dongtai City, Jiangsu Province, P.R.China

0.08alloy DalianForgingsFIRMACO FLOURISH FORGING CO., LTD. OF INNERFIRMACO FLOURISH FORGING CO., LTD. OF INNERFIRMACO FLOURISH FORGING CO., LTD. OF INNERFIRMACO FLOURISH FORGING CO., LTD. OF INNER

As at 22 December 2017 7Page

Page 8: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +86 0472 3116744 email: [email protected] web: www.yifcdz.com

Certificate No: MD00/4707/0001/3 Expiry Date: 04/09/2020

Qing Shan District,BaoTou City,Inner Mongolia,

MONGOLIA FIRST MACHINERY GROUP CORPORATIONMin Zhu Road,

5.00carbon GuangzhouForgingsGUANGZHOU SHIPYARD CO.,LTD.,GUANGZHOU SHIPYARD CO.,LTD.,GUANGZHOU SHIPYARD CO.,LTD.,GUANGZHOU SHIPYARD CO.,LTD.,5.00carbon-manganese5.00alloy0.53austenitic stainless

Tel No: +86 757 88758521 Fax no: +86 757 88792797email : [email protected] web: www.gzs.cssc.net.comCertificate No: MD00/4167/0002/3 Expiry Date 27/05/2019

PingzhouNanhai FoshanGuangdong, 528251

FOSHAN CASTING & FORGING FACTORYPimgshen Zoom

25.00carbon NantongForgingsHAI'AN WEISHI HEAVY MACHINERY CO., LTDHAI'AN WEISHI HEAVY MACHINERY CO., LTDHAI'AN WEISHI HEAVY MACHINERY CO., LTDHAI'AN WEISHI HEAVY MACHINERY CO., LTD25.00carbon-manganese7.00alloy

Tel: +86 513 8877 3838 Fax: +86 513 8877 8866 Mobile: +86 13328080 560 Email: [email protected] Web: http://www.hawszj.comCertificate Number: MD00/4053/0002/3 Expiry: 10/07/2018

No. 199, Zhongba Road (S),Hai'an County,Jiangsu Province,

22.00carbon ZhoushanForgingsHANGZHOU STEAM TURBINE CASTING & FORGING CO LTD.,HANGZHOU STEAM TURBINE CASTING & FORGING CO LTD.,HANGZHOU STEAM TURBINE CASTING & FORGING CO LTD.,HANGZHOU STEAM TURBINE CASTING & FORGING CO LTD.,22.00carbon-manganese22.00alloy

Tel No. +86 571 890 23816 Fax: +086 571 890 23816

E-mail: [email protected]

Website: www.zjhtf.cn

Certificate No: MD00/3807/0002/3 Expiry Date: 08.08.2020

Hangzhou City,Zhejiang,311106

No.2 Road Tangqi Industrial Park,

0.20carbon WuhanForgingsINNER MONGOLIA NO. 1 MACHINERY (GROUP) CO., LTD.INNER MONGOLIA NO. 1 MACHINERY (GROUP) CO., LTD.INNER MONGOLIA NO. 1 MACHINERY (GROUP) CO., LTD.INNER MONGOLIA NO. 1 MACHINERY (GROUP) CO., LTD.0.20carbon-manganese0.20alloy

Tel: +86 379 6407 6206 Fax: +86 379 6407 6206 Email to: [email protected] as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. only without final heat treatmentIncluding crankshafts with K factor > 1.05 for approved applications manufactured by the die forging processCertificate #: MD00/3498/0003/3 Expiry date: 25/07/2017

Qingshan DistrictBaotou CityInner Mongolia

Fucheng Forging Co., Ltd.

3.60alloy JiangyinForgingsJIANGSU ASIAN STAR ANCHOR CHAIN Co., LtdJIANGSU ASIAN STAR ANCHOR CHAIN Co., LtdJIANGSU ASIAN STAR ANCHOR CHAIN Co., LtdJIANGSU ASIAN STAR ANCHOR CHAIN Co., Ltd

Tel: +86 523 4686 808 Fax: +86 523 4681 390 Email: [email protected] Web: http://www.anchor-chain.comCertificate Number: MD00/1974/0002/3 Expiry: 01/07/2018

JingjiangJiangsu Province

Dongxing Town, 214533

7.00carbon NanjingForgingsJIANGSU HEAVY FORGING CO., LTD.JIANGSU HEAVY FORGING CO., LTD.JIANGSU HEAVY FORGING CO., LTD.JIANGSU HEAVY FORGING CO., LTD.7.00carbon-manganese7.00alloy0.75austenitic stainless

Tel: +86 (523) 87890355 Fax: +86 (523) 87898280email: [email protected]

Certifdicate No: MD00/3572/0006/3 Expiry date: 13/03/2018

Liuchen ZhenTaixing CityJiangsu Province, 225472

Juduo Cun

As at 22 December 2017 8Page

Page 9: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

13.00carbon JiangyinForgingsJIANGSU HONGSHENG HEAVY INDUSTRY GROUP CO., LTD.JIANGSU HONGSHENG HEAVY INDUSTRY GROUP CO., LTD.JIANGSU HONGSHENG HEAVY INDUSTRY GROUP CO., LTD.JIANGSU HONGSHENG HEAVY INDUSTRY GROUP CO., LTD.13.00carbon-manganese13.00alloy

Tel: 0086 510 80665001, Fax: 0086 510 86279082Email: [email protected] #: MD00/3559/0003/3 Expiry date: 23/01/2018

Chengjiang Industry ParkJiangyin CityJiangsu Province, 214405

No. 28 Xiejing Road

16.00carbon JiangyinForgingsJIANGSU HUAWEI MACHINERY MANUFACTURING CO., LTD.JIANGSU HUAWEI MACHINERY MANUFACTURING CO., LTD.JIANGSU HUAWEI MACHINERY MANUFACTURING CO., LTD.JIANGSU HUAWEI MACHINERY MANUFACTURING CO., LTD.16.00carbon-manganese16.00alloy

Tel No: + 00 86-515-86279977 Fax No: + 00 86-515-86279899Email: Xcg_ [email protected]: www.jshwjx.mysteel.com.cn

Certificate No. MD00/4727/0001/3 Expiry Date: 25/10/2020

99 Xiufu Road,Jianhu County, YanchengJiangsu

12.80carbon NanjingForgingsJIANGSU JINYUAN HIGH-END EQUIPMENT CO., LTD.JIANGSU JINYUAN HIGH-END EQUIPMENT CO., LTD.JIANGSU JINYUAN HIGH-END EQUIPMENT CO., LTD.JIANGSU JINYUAN HIGH-END EQUIPMENT CO., LTD.12.80carbon-manganese3.50alloy

Tel: +86 519 87190508 Fax: +86 519 87191868 E-mail: [email protected]

Website: http://www.jinyuanforge.cn

Certificate Number: MD00/4025/0001/3 Expiry date: 16/05/2015

No. 8, Zhongguancun Road,Liyang City, Jiangsu ProvincePost Code: 213376

0.01carbon NanjingForgingsJIANGSU LEAP MACHINE CO., LTD.JIANGSU LEAP MACHINE CO., LTD.JIANGSU LEAP MACHINE CO., LTD.JIANGSU LEAP MACHINE CO., LTD.0.01carbon-manganese0.01alloy

Tel: +86 511 86632504 Fax: +86 511 86634018 Email: [email protected] Web: http://www.leapmachine.comCertificate No.: MD00/3513/0004/3 Expiry date: 03/08/2020

Huangtang TownDanyang CityJiangsu Province

Changli West Road No. 240

18.00carbon JiangyinForgingsJIANGSU SUNAN HEAVY MACHINERYJIANGSU SUNAN HEAVY MACHINERYJIANGSU SUNAN HEAVY MACHINERYJIANGSU SUNAN HEAVY MACHINERY18.00carbon-manganese18.00alloy

Tel No: +86 (0) 512 5227 5923 Fax no: +86 (0) 512 5227 3689email [email protected] No. MD00/3751/0004/3 Expiry date 05/03/2019

Dongzhang, Xingang Town,Changshu Economic Development Zone,Jiangsu,

TECHNOLOGY CO LTD.Changqing Road

108.00carbon JiangyinForgingsJIANGSU SUNAN HEAVY MACHINERYJIANGSU SUNAN HEAVY MACHINERYJIANGSU SUNAN HEAVY MACHINERYJIANGSU SUNAN HEAVY MACHINERY108.00carbon-manganese62.00alloy

Tel: +85 0512 52275923 Fax: +86 0512 51923689email: [email protected]

Certificate No. MD00/4334/0002/3 Expiry Date: 09/06/2020

Economic & Technology Development Zone,Changshu City,Jiangsu Province,

TECHNOLOGY CO LTD.No.6 XingGang Road,

21.00carbon JiangyinForgingsJIANGSU SUNSHINE FORGING Co. LTDJIANGSU SUNSHINE FORGING Co. LTDJIANGSU SUNSHINE FORGING Co. LTDJIANGSU SUNSHINE FORGING Co. LTD21.00carbon-manganese13.00alloy4.50austenitic stainless

As at 22 December 2017 9Page

Page 10: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +86-519-86156369 Fax: +86-519-86159421

E-mail: [email protected]

Website: js-sunshine.com

Certificate No: md00/4580/0001/3 Expiry Date: 19/05/2019

Wujin District,Changzhou City,Jiangsu

The Industrial Zone of Xueyan Town,

12.00carbon JiangyinForgingsJIANGYIN FANGYUAN RINGLIKEJIANGYIN FANGYUAN RINGLIKEJIANGYIN FANGYUAN RINGLIKEJIANGYIN FANGYUAN RINGLIKE12.00carbon-manganese12.00alloy

Tel: +86 510 86902996 Fax: +86 510 86238859email: [email protected] web: www.fangyuanforging.cn

Certificate #: MD00/3946/0003/3 Expiry date: 10/09/2020

Zhouzhuang Town,Jiangyin,Jiangsu Province, PC 214423

FORGING & FLANGE Co., Ltd.No. 51 Sandun East Road,

6.00carbon JiangyinForgingsJIANGYIN HENGRUN RING FORGING CO., LTD.JIANGYIN HENGRUN RING FORGING CO., LTD.JIANGYIN HENGRUN RING FORGING CO., LTD.JIANGYIN HENGRUN RING FORGING CO., LTD.6.00carbon-manganese0.70austenitic stainless

Tel: +86 0510 86396655 or 7717 Fax: +86 0510 8639 6333 or 6868 Email: [email protected] Web: http://hengrun-forging.comCertificate Number: MD00/4203/0002/3 Expiry: 15/07/2019

181, Zhuhuang Road,Zhutang Industrial Zone;Jiangyin, Jiangsu, PC 214415

1.00carbon JiangyinForgingsJIANGYIN HUAXI FLANGE & PIPES FITTING Co., Ltd.JIANGYIN HUAXI FLANGE & PIPES FITTING Co., Ltd.JIANGYIN HUAXI FLANGE & PIPES FITTING Co., Ltd.JIANGYIN HUAXI FLANGE & PIPES FITTING Co., Ltd.1.00carbon-manganese1.00austenitic stainless

Tel: +86 510 862 216551 Fax: +86 510 862 16560web: www.flange.com.cn

Certificate No: MD00/4717/0001/3 Expiry Date: 28/09/2020

No. 18 Xiaokang RoadHuashi Town, JiangyinWuxi, Jiangsu

20.00carbon JiangyinForgingsJIANGYIN NANGONG FORGING CO., LTD.JIANGYIN NANGONG FORGING CO., LTD.JIANGYIN NANGONG FORGING CO., LTD.JIANGYIN NANGONG FORGING CO., LTD.20.00carbon-manganese20.00alloy

Tel: +86 510 861 80698 Fax: +86 510 861 84396web: www.ngdz.net

Certificate No: MD00/4403/0001/3 Expiry Date: 03/11/2017

Nanzha Town,Jiangyin City,Jiangsu Province,

Jinnan Industrial Zone,

22.00carbon JiangyinForgingsJIANGYIN TONGQING MACHINERY MANUFACTURE CO LTDJIANGYIN TONGQING MACHINERY MANUFACTURE CO LTDJIANGYIN TONGQING MACHINERY MANUFACTURE CO LTDJIANGYIN TONGQING MACHINERY MANUFACTURE CO LTD22.00carbon-manganese22.00alloy0.80austenitic stainless

Tel No: +86 0510 86239967 Fax No: +86 010 86906237 Mobile: +86 13395168625Email: [email protected] : www.forgings.net.cnCertificate No. MD00/3685/0004/3 Expiry date 28/09/2018

Zhouzhuang TownJiangyin CityJiangsu Province 214423

No. 18 Sandun East Road

0.20austenitic stainless JiangyinForgingsJIANGYIN UNIQUE FLANGE MANUFACTURING CO., LTD.JIANGYIN UNIQUE FLANGE MANUFACTURING CO., LTD.JIANGYIN UNIQUE FLANGE MANUFACTURING CO., LTD.JIANGYIN UNIQUE FLANGE MANUFACTURING CO., LTD.

Tel No 0086 510 86065399 Fax No 0086 510 86065799

Email: [email protected]

Web : www.uniqueflange.com

Certificate No. MD00/4205/0002/3 Expiry date 20/07/2019

No. 66 Haida Road, Huashi TownJiangsu Province, 214421

As at 22 December 2017 10Page

Page 11: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

35.00carbon JiangyinForgingsJIANGYIN ZENKUNG FORGING CO., LTD.JIANGYIN ZENKUNG FORGING CO., LTD.JIANGYIN ZENKUNG FORGING CO., LTD.JIANGYIN ZENKUNG FORGING CO., LTD.35.00carbon-manganese18.00alloy

Tel: +86 510 8621 5929 Fax: +86 510 8621 8523 Email: [email protected] Web: http://www.zenkungforging.comCertificate Number: MD00/3774/0004/3 Expiry: 18/04/2019

Xuxiang, Shuxin,Longsha Industrial Zone,Jiangyin, Jiangsu Province 214421, P.R. of China

0.50carbon JiangyinForgingsJIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.JIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.JIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.JIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.0.50carbon-manganese0.50austenitic stainless

Tel: +86 (510) 86997071 Fax: +86 (510) 86996035 M +86 13706168395Email: [email protected]: www.znhi.com.cnCertificate #: MD00/3439/0005/3 Expiry date: 29/02/2020

High & New Technique Industries Development ZoneJiangyin CityJiangsu Province

788, Jinshan Road,

0.10carbon JiangyinForgingsJINGJIANG HENGYU CHEMICAL MACHINERY CO., LTD.JINGJIANG HENGYU CHEMICAL MACHINERY CO., LTD.JINGJIANG HENGYU CHEMICAL MACHINERY CO., LTD.JINGJIANG HENGYU CHEMICAL MACHINERY CO., LTD.0.10carbon-manganese0.05austenitic stainless

Tel: +86 523 82355688 Fax: +86 523 82355689 Email: [email protected] Web: http://www.jjhengyu.comCertificate #: MD00/4309/0002/3 Expiry date: 07/04/2020

East of Dunyi BridgeXilai Town, Jingjiang CityJiangsu Province 214518

2.50carbon DalianForgingsLIAONING 518 INTERNAL COMBUSTION ENGINELIAONING 518 INTERNAL COMBUSTION ENGINELIAONING 518 INTERNAL COMBUSTION ENGINELIAONING 518 INTERNAL COMBUSTION ENGINE2.50carbon-manganese1.70alloy

Tel: +86 415 6158090 Fax: +86 415 6158894 Mob: 138 4251 8850 email : [email protected] web : www.dd518c.com

Certificate #: MD00/3470/0008/3 Expiry date: 07/06/2020

Including crankshaft with K factor>1.0 for approved applications manufactured by TR process and alloy crankshafts up to 12TApproved for alloy forgings by closed die process up t0 445kgs

Dangdong CityLiaoning ProvincePost Code: 118009

FITTING CO., LTDNo. 97, North Ring Road, Zhenxing District

5.50carbon NanjingForgingsLIYANG JINKUN FORGING & MACHINING Co., LtdLIYANG JINKUN FORGING & MACHINING Co., LtdLIYANG JINKUN FORGING & MACHINING Co., LtdLIYANG JINKUN FORGING & MACHINING Co., Ltd5.50carbon-manganese5.50alloy

Tel: +86 0519 57386007 Fax: +86 0519 87336908email; [email protected] web: www.jkforge.cn

Certificate No. MD00/4492/0001/3: Expiry Date: 23.06.2018

North Kunlun Road,Liyang City 213300,Jiangsu Province,

No 388,

13.30carbon WuhanForgingsLUOYANG SHENGJIU FORGING Co., Ltd.LUOYANG SHENGJIU FORGING Co., Ltd.LUOYANG SHENGJIU FORGING Co., Ltd.LUOYANG SHENGJIU FORGING Co., Ltd.13.30carbon-manganese13.30alloy

Tel: +86-379-6519 0157 Fax: +86-379-6730 7619email :[email protected] web: www.lyxql.com

Certificate No: MD00/4418/0001/3 Expiry Date: 15/01/2018

Approval covers open die forgings and ring rolling.

Luoxin Industry Park,Luoyang,Henan,

Xueyuan Road,

21.00carbon WuhanForgingsLUOYANG XINGRONG INDUSTRIAL CO., LTD.LUOYANG XINGRONG INDUSTRIAL CO., LTD.LUOYANG XINGRONG INDUSTRIAL CO., LTD.LUOYANG XINGRONG INDUSTRIAL CO., LTD.21.00carbon-manganese20.00alloy

As at 22 December 2017 11Page

Page 12: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +86 15937917790 Fax: +86 379 68141083 Email: [email protected] #: MD00/3844/0004/3 Expiry date: 11/12/2019

Xiaodian, Ruyang CountyHenan ProvincePost Code: 471212

0.03carbon NanjingForgingsNANJING AUTOMOTIVE FORGING CO., LTD.NANJING AUTOMOTIVE FORGING CO., LTD.NANJING AUTOMOTIVE FORGING CO., LTD.NANJING AUTOMOTIVE FORGING CO., LTD.0.03carbon-manganese0.03alloy

tel: 86-25-58120048 Fax: 86-25-58120099email; [email protected] web: www.njforge.comCertificate #: MD00/3290/0004/3 Expiry date: 02/12/2018

Qixia District,Nanjing,210033

XiGang

34.00carbon NanjingForgingsNANJING BODA HEAVY FORGING CO., LTD.NANJING BODA HEAVY FORGING CO., LTD.NANJING BODA HEAVY FORGING CO., LTD.NANJING BODA HEAVY FORGING CO., LTD.34.00carbon-manganese32.40alloy

Tel No. +86 25 57066065 Fax No +86 25 5706 4783Mob 0086 13861720885Email: [email protected] www.asafor.comCert No. MD00/3677/0004/3 Expiry date: 11/10/2018

Liuhe DistrictNanjing CityJiangsu Province

No. 500 Jiangqiao

0.13carbon NanjingForgingsNANJING INTERNATIONAL MARINENANJING INTERNATIONAL MARINENANJING INTERNATIONAL MARINENANJING INTERNATIONAL MARINE0.13carbon-manganese0.13alloy0.13austenitic stainless0.13ferritic stainless*0.13martensitic stainless*

Tel: +86 025 52695723 Fax: +86 025 52690499email: [email protected] web: www.ims-hd.com* for approved applicationsCertificate #: MD00/3297/0004/3 Expiry date: 16/12/2018

Nanjing

EQUIPMENT & SPARES LTD. (IMS)Jiangning District

0.01carbon Shanghai PortForgingsNINGBO KAIRONG SHIP MACHINERY CO. LTDNINGBO KAIRONG SHIP MACHINERY CO. LTDNINGBO KAIRONG SHIP MACHINERY CO. LTDNINGBO KAIRONG SHIP MACHINERY CO. LTD0.01carbon-manganese0.01austenitic stainless

Ningbo Kairong Machinery Co Ltd, No, Mould Road, Daqi Industry Park, Beilun Ningbo, 315806, ChinaTel: 057486111777Email: [email protected] No: MD00/4375/0001/3 Expiry date: 21/08/17

No 86, Mould Road,Daqi Industry Park,Beilun Ningbo, 315806

Kairong

3.30carbon QingdaoForgingsSHANDONG IRAETA HEAVY INDUSTRY Co., Ltd.SHANDONG IRAETA HEAVY INDUSTRY Co., Ltd.SHANDONG IRAETA HEAVY INDUSTRY Co., Ltd.SHANDONG IRAETA HEAVY INDUSTRY Co., Ltd.3.30carbon-manganese2.20alloy0.30austenitic stainless

Tel: +86 531 83800992 Fax: +86 531 83809527email: [email protected] web: www.shandongiraeta.cn

Certificate No: MD00/4425/0001/3 Expiry Date: 28/01/2018

Zhangqiu,Jinan,Shandong Province

No. 1 and No. 8 Luyang Industrial District,

0.40carbon QingdaoForgingsSHANDONG RUIYE FLANGE Co. LTDSHANDONG RUIYE FLANGE Co. LTDSHANDONG RUIYE FLANGE Co. LTDSHANDONG RUIYE FLANGE Co. LTD0.40carbon-manganese

As at 22 December 2017 12Page

Page 13: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: + 86-531-83800366 Fax. 86-531-83807366

E-mail: [email protected]

Website: www.ryflange.com

Certificate No: MDOO/4603/0001/3 Expiry Date: 15/08/2019

Guanzhuang,Zhangqui City,Shandong Province. 250217.

Renjia Industrial Area,

30.00carbon QingdaoForgingsSHANDONG TAISHAN NUCLEAR POWER EQUIPMENTSHANDONG TAISHAN NUCLEAR POWER EQUIPMENTSHANDONG TAISHAN NUCLEAR POWER EQUIPMENTSHANDONG TAISHAN NUCLEAR POWER EQUIPMENT30.00carbon-manganese30.00alloy

Tel: +86 538 8611782 Fax: +86 538 8611063 Email mailto: [email protected] Web tttp://www.skduanya.com

Certificate No. MD00/3765/0004/3 Expiry Date: 05/04/2019

Daiyue DistrictTaian CityShandong Province

MANUFACTURING CO., LTD.Beicun, Shankou Town

0.10carbon QingdaoForgingsSHANDONG ZOUPING WANGDASHANDONG ZOUPING WANGDASHANDONG ZOUPING WANGDASHANDONG ZOUPING WANGDA0.10carbon-manganese

Tel No: +86 531 838 68889 Fax No: +86 531 838 62247Email: [email protected]: www.sdwanda.comCertificate No: MD00/4312/0002/03 Expiry date: 22/04/2020

Linchi Town,Zouping,

FORGING AND PRESSING CO., LTDBaijia,

0.15carbon ZhoushanForgingsSHANGHAI ALAFA MARINE EQUIPMENT CO., LTD.SHANGHAI ALAFA MARINE EQUIPMENT CO., LTD.SHANGHAI ALAFA MARINE EQUIPMENT CO., LTD.SHANGHAI ALAFA MARINE EQUIPMENT CO., LTD.0.15austenitic stainless

Tel: +86 577 869955555 Fax: +86 574 86838000

E-mail: [email protected]

Certificate No : MD00/3132/0006/3 Expiry date: 28/01/2020

Wangzha Area, Standard Workshop of Longwan DistricWenzhou CityZhejiang Province

37.00carbon-manganese JiangyinForgingsSHANGHAI ELECTRIC (WUXI) FORGING CO., LTD.SHANGHAI ELECTRIC (WUXI) FORGING CO., LTD.SHANGHAI ELECTRIC (WUXI) FORGING CO., LTD.SHANGHAI ELECTRIC (WUXI) FORGING CO., LTD.

Tel: +86 13665 182848 Fax: +86 0510 85583828 email: [email protected]

Cerificate No MD00/4482/0001/3. Expiry Date: 14/05/2018

Wuxi,Jiangsu Province,(Taihu Street Industrial Settlements),

No.99 Hehuan Road,North District of Hudai Industrial Park,

100.00carbon Shanghai PortForgingsSHANGHAI ELECTRIC SHMP CASTING & FORGING CO., LTD.SHANGHAI ELECTRIC SHMP CASTING & FORGING CO., LTD.SHANGHAI ELECTRIC SHMP CASTING & FORGING CO., LTD.SHANGHAI ELECTRIC SHMP CASTING & FORGING CO., LTD.100.00carbon-manganese100.00alloy

Tel: +86 21 34098660 Mob: +86 1891 780 4183email [email protected] web: www.sshanghai-electric.com

Including steelmaking and semi-built crankshafts

Certificate #: MD00/1345/0009/3 Expiry date: 09/04/2020

Minhang DistrictShanghai200245

1800 Jiangchuan Road

8.00carbon Shanghai PortForgingsSHANGHAI HUDONG FORGING PLANT CO., LTD.SHANGHAI HUDONG FORGING PLANT CO., LTD.SHANGHAI HUDONG FORGING PLANT CO., LTD.SHANGHAI HUDONG FORGING PLANT CO., LTD.8.00carbon-manganese4.00alloy

Tel:+86 21 60450281 Fax: +86 21 60450283 email [email protected]

Certificate #: MD00/2892/0007/3 Expiry date: 10/05/2018

Nanhui Lingang Heavy Industry Zone201306

South Xinyuan Road 55

As at 22 December 2017 13Page

Page 14: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.01carbon Shanghai PortForgingsSHANGHAI JIAODA CHUKYO FORGING & STAMPING CO LTDSHANGHAI JIAODA CHUKYO FORGING & STAMPING CO LTDSHANGHAI JIAODA CHUKYO FORGING & STAMPING CO LTDSHANGHAI JIAODA CHUKYO FORGING & STAMPING CO LTD0.01carbon-manganese0.01alloy

Tel no +86 21 57560990 ext 244 Fax No +86 2157568855 email: [email protected] web: www.jd-forging.comCertificate Number: MD00/3726/0003/3 Expiry: 04/01/2019

Qingcun Town,Fengxian District,Shanghai

No. 508 Fengyong Road

2.60carbon Shanghai PortForgingsSHANGHAI SHENJIANG FORGING CO LTDSHANGHAI SHENJIANG FORGING CO LTDSHANGHAI SHENJIANG FORGING CO LTDSHANGHAI SHENJIANG FORGING CO LTD2.60carbon-manganese2.10alloy

Tel no. +86 21 5913 5190 Fax No. +86 21 6913 4332email : [email protected] web: www.sjforging.comCertificate No MD00/3790/0003/3 Expiry date: 05/06/2017

No. 200 Jiefangdaoxihuan Road,Shanghai 201812,

0.45carbon WuhanForgingsSHANXI FORGING PLANTSHANXI FORGING PLANTSHANXI FORGING PLANTSHANXI FORGING PLANT0.45carbon-manganese0.45alloy

Tel: +86 379 6407 6173 Fax: +86 379 6407 6206 Email to:[email protected] as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. onlyIncluding crankshafts with K factor > 1.05 for approved applications manufactured by the die forging processCertificate #: MD00/3501/0003/3 Expiry date: 25/07/2017

Nanliang Town, Yicheng CountyShanxi Province

2.00carbon DalianForgingsSHANXI GUANJIAYING FLANGE FORGING CO., LTD.SHANXI GUANJIAYING FLANGE FORGING CO., LTD.SHANXI GUANJIAYING FLANGE FORGING CO., LTD.SHANXI GUANJIAYING FLANGE FORGING CO., LTD.2.00carbon-manganese2.00alloy2.00austenitic stainless2.00duplex stainless*

Tel: +86 350 6086464, 13753025606 Fax: +86 350 6086462 Email mailto: [email protected] #: MD00/3494/0003/3 Expiry date: 07/04/2017

Guanjiaying Industry ZoneDingxiang CountyShanxi Province 035404

12.00carbon DalianForgingsSHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.12.00carbon-manganese12.00alloy

Tel: +81 (0)351 2130108 Fax: +81 (0)351 2317595

E-mail: [email protected]

Website:tisco.com.cn

Certificate No. MD00/4240/0003/3 Expiry Date: 14/10/2019.

Approved for semi finished forged bars to 400mm maximum diameter in C, C-Mn, Alloy, Austenitic and Duplex Stainleee Steel.

No.2 Jian Caoping Street,Taiyuan City,Shanxi Province,

Section Steel Plant,

60.00carbon DalianForgingsSHI GANG JING CHENG EQUIPMENT DEVELOPMENTSHI GANG JING CHENG EQUIPMENT DEVELOPMENTSHI GANG JING CHENG EQUIPMENT DEVELOPMENTSHI GANG JING CHENG EQUIPMENT DEVELOPMENT60.00carbon-manganese38.00alloy

Tel: +86 0417 3257800 Fax: +86 0417 3257905email: [email protected] web: http://www.cyedm.com.cnCertificate #: MD00/4234/0005/3 Expiry date: 08/10/2019

No. 1 Xinlian Street,Yingkou,Liaoning Province,

AND MANUFACTURING CO., LTD.

6.00carbon WuhanForgingsSICHUAN LIUHE FORGING CO., LTD.SICHUAN LIUHE FORGING CO., LTD.SICHUAN LIUHE FORGING CO., LTD.SICHUAN LIUHE FORGING CO., LTD.6.00carbon-manganese6.00alloy

Tel No: +86 0816 3521518 Fax No: +86 0816 3521518email: [email protected] web: www.6hdz.comCertificate No: MD00/4176/0002/3 Expiry date 08/06/2019

Baolun Road(W), Henan Industrial ParkJiangyou CitySichuan Province

As at 22 December 2017 14Page

Page 15: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.08alloy WuhanForgingsSINOMA SCIENCE & TECHNOLOGY (JIUJIANG) CO., LTD.SINOMA SCIENCE & TECHNOLOGY (JIUJIANG) CO., LTD.SINOMA SCIENCE & TECHNOLOGY (JIUJIANG) CO., LTD.SINOMA SCIENCE & TECHNOLOGY (JIUJIANG) CO., LTD.

Tel No 0086 13607020270 Email: [email protected] Cert No. MD00/4473/0002/3 Expiry date: 22/04/2018

Approved for seamless gas cylinder with the diameter of 267mm, thickness 6mm to ISO9809-1 for approved application

No. 138 Renmin RoadRuichangJiangxi

25.90carbon Shanghai PortForgingsSUZHOU BAOFORGING CO., LTD.SUZHOU BAOFORGING CO., LTD.SUZHOU BAOFORGING CO., LTD.SUZHOU BAOFORGING CO., LTD.25.90carbon-manganese25.90alloy

Tel: +86 0512 65085926 Fax: +86 0512 65085933email: [email protected] web: www.baoforging.cnCertificate No.: MD00/4429/0001/3 Expiry date: 31/01/2018

Suzhou CityJiangsu Province215152

Anmin Road, Panyang Industrial ParkHuangdai Town, Xiangcheng District

3.00carbon Shanghai PortForgingsSUZHOU CITY HONGSHENG FORGING CO., LTD.SUZHOU CITY HONGSHENG FORGING CO., LTD.SUZHOU CITY HONGSHENG FORGING CO., LTD.SUZHOU CITY HONGSHENG FORGING CO., LTD.3.00carbon-manganese3.00alloy

Tel No. +86 512 6695 0087 Fax No. +86 512 6653 3869 Mob 13862015218Email: [email protected] www.hsspecialsteel.comCertificate No. MD00/4179/0001/3 Expiry Date 10/06/2016

Wuzhong District,Suzhou,Jiangsu Province

No.8, Yinzang Rd, Linhu Town

120.00carbon WuhanForgingsTAI YUAN HEAVY INDUSTRY CO. LTD.TAI YUAN HEAVY INDUSTRY CO. LTD.TAI YUAN HEAVY INDUSTRY CO. LTD.TAI YUAN HEAVY INDUSTRY CO. LTD.120.00carbon-manganese

Tel: +86 351 636 6770 Fax: +86 351 636 6750 Email: [email protected]

Web: http:\\www.tyhi.com.cn

Certificate #: MD00/3412/0006/3 Expiry date: 30/09/2019

No.53, Yuhe Street,Wanbailin District, Taiyuan City,Shanxi Province, 030024,

0.06carbon JiangyinForgingsTAIZHOU PINGSHUN FORGING Co. LTDTAIZHOU PINGSHUN FORGING Co. LTDTAIZHOU PINGSHUN FORGING Co. LTDTAIZHOU PINGSHUN FORGING Co. LTD0.03austenitic stainless

Tel: + 86-0523-88641085 Fax: + 86-0523-88647999

E-mail: [email protected]

Certificate No. MD00/4607/0001/3 Expiry Date: 25/08/2019

Yuduo Town,Jiangyan District, Taizhou City,Jiangsu Provence.

No. 1 Renmin Road,

0.15carbon JiangyinForgingsTAIZHOU SANLI PIPE FITTING CO., LTD.TAIZHOU SANLI PIPE FITTING CO., LTD.TAIZHOU SANLI PIPE FITTING CO., LTD.TAIZHOU SANLI PIPE FITTING CO., LTD.0.15carbon-manganese

Tel: +86 523 8864 6888 Fax: +86 523 8864 6999 Email: [email protected] scope of approval is restricted to forged flanges.Certificate Number: MD00/4093/0002/3 Expiry: 19/11/2018

Yuduo Industrial ParkTaizhou CityJiangsu Province

12.54carbon QingdaoForgingsTIANJIN FEB 7th CONCORD CRANKSHAFT CO., LTD.,TIANJIN FEB 7th CONCORD CRANKSHAFT CO., LTD.,TIANJIN FEB 7th CONCORD CRANKSHAFT CO., LTD.,TIANJIN FEB 7th CONCORD CRANKSHAFT CO., LTD.,12.54carbon-manganese12.54alloy

Tel No: +86 22 24358008 Fax No: +86 22 24358008Email: [email protected]:www.kangkude.comCertificate No: MD00/3920/0003/3 Expiry date 05/06/2020

No.649, Jintang Road,Tianjin300301

As at 22 December 2017 15Page

Page 16: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

30.00carbon QingdaoForgingsTIANJIN SERI MACHINERY EQUIPMENT CO., LTD.TIANJIN SERI MACHINERY EQUIPMENT CO., LTD.TIANJIN SERI MACHINERY EQUIPMENT CO., LTD.TIANJIN SERI MACHINERY EQUIPMENT CO., LTD.30.00carbon-manganese30.00alloy

Tel:+86 (0)22 24943033 Fax: +86(0)22 24943033 Certificate #: MD00/4423/0001/3 Expiry date: 26/01/2018

Dongli District

No. 3, Heavy Industrial RoadHeavy Industrial Park

60.00carbon QingdaoForgingsTIANJIN TIANZHONG GIANT HEAVY INDUSTRY CO., LTD.TIANJIN TIANZHONG GIANT HEAVY INDUSTRY CO., LTD.TIANJIN TIANZHONG GIANT HEAVY INDUSTRY CO., LTD.TIANJIN TIANZHONG GIANT HEAVY INDUSTRY CO., LTD.60.00carbon-manganese14.00alloy

Tel:+86 (0)22 86885730 Fax: +86(0)22 8688 5673

emsil: [email protected] web: www.jiangtian.cn

Certificate #: MD00/4094/0003/3 Expiry date: 24/11/2018

Xiditou TownBeichen DistrictTianjin

No. 609, Jinyu Road

0.18alloy QingdaoForgingsTIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.

Tel: +86 22 59816618 Fax: +86 22 59816630Email: [email protected] Web: www.btic.cn

Certificate No. MD00/4343/0001/3 Expiry date: 20/06/2017Approved for forged seamles gas cylinder with the diameter of 89mm to 219mm, thickness 2.4mm to 14.3mm for approved application

No. 268 Jinbin RoadTianjin Port Free Trade Zone

Small Line

0.32alloy QingdaoForgingsTIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.

Tel: +86 22 59816618 Fax: +86 22 59816630Email: [email protected] Web: www.btic.cnApproved for forged seamles gas cylinder with the diameter of 219mm to 270mm, thickness 5.2mm to 14.2mm for approved applicationCertificate No. MD00/4405/0002/3 Expiry date: 01/10/2017

Tianjin Port Free Trade ZoneTianjin

406 LINENo 306 Xingang Road,

30.00carbon WuhanForgingsTIANMA (CHENGDU) RAILWAY BEARING CO., LTDTIANMA (CHENGDU) RAILWAY BEARING CO., LTDTIANMA (CHENGDU) RAILWAY BEARING CO., LTDTIANMA (CHENGDU) RAILWAY BEARING CO., LTD30.00carbon-manganese30.00alloy

Including steelmaking by EAF and ingot production maxm 40T

Tel: +86 15718028399/13693478848 Fax: +86 2883632851

Email: [email protected]

Web http://www.cdtmb.com

Certificate No. MD00/4173/0003/3 Expiry date: 03/06/2016

No. 143, Xia Street (N),Chengxiang Town, Qingbaijiang District,Chengdu City , Sichuan Province. P.C. 610306

0.30carbon QingdaoForgingsTIANRUN CRANKSHAFT CO., LTD.TIANRUN CRANKSHAFT CO., LTD.TIANRUN CRANKSHAFT CO., LTD.TIANRUN CRANKSHAFT CO., LTD.0.30carbon-manganese0.30alloy

Tel: +86 631 898 2033 Fax: +86 631 845 1761 eail: [email protected] web: www.tianrun.comThe scope of approval includes solid forged crankshafts to the above maximum forged weight.Certificate Number: MD00/4015/0002/3 Expiry: 08/01/2019

No. 2 - 13 Tianrun RoadWendeng CityShandong Province

Numbers 1 and 2 Forging Workshops

4.00carbon DalianForgingsTIANRUN CRANKSHAFT CO., LTD.TIANRUN CRANKSHAFT CO., LTD.TIANRUN CRANKSHAFT CO., LTD.TIANRUN CRANKSHAFT CO., LTD.4.00carbon-manganese4.00alloy

el: +86 631 898 2033 Fax: +86 631 845 1761 eail: [email protected] web: www.tianrun.comThe scope of approval includes solid forged crankshafts to the above maximum forged weight.Certificate Number: MD00/4556/0001/3 Expiry: 28/02/2019

No. 2-13 Tianrun RoadNanhai Forging Workshops

As at 22 December 2017 16Page

Page 17: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

151.00carbon QingdaoForgingsTONGYU HEAVY INDUSTRY Co., LtdTONGYU HEAVY INDUSTRY Co., LtdTONGYU HEAVY INDUSTRY Co., LtdTONGYU HEAVY INDUSTRY Co., Ltd151.00carbon-manganese121.00alloy

Tel: +86 534 7520690 Fax: +86534 7521470Certificate No. MD00/3998/0003/3 Expiry date: 28/02/2018

Dezhou City,Shandong Province,

National High-Tech Industry Area,Yucheng City,

70.00carbon WuhanForgingsWUHAN HEAVY INDUSTRYWUHAN HEAVY INDUSTRYWUHAN HEAVY INDUSTRYWUHAN HEAVY INDUSTRY70.00carbon-manganese75.00alloy

Tel: +86 27 6886 1813 Fax: +86 27 6886 1810Email wh471zg.com.cnWeb www.whzg.com.cnIncluding crankshafts with K factor > 1.0 for approved applicationsIncluding steelmaking and semi-built crankshafts (max. throw weight 12 tonnes)Certificate #: MD00/1681/0015/3 Expiry date: 02/04/2020

Qingshan DistrictWuhanHubei

CASTING AND FORGING CO., LTD.1 Wudong Street

15.00carbon WuhanForgingsWUHAN ZHONGYE MACHINERY WHOLE SET EQUIPMENTWUHAN ZHONGYE MACHINERY WHOLE SET EQUIPMENTWUHAN ZHONGYE MACHINERY WHOLE SET EQUIPMENTWUHAN ZHONGYE MACHINERY WHOLE SET EQUIPMENT15.00carbon-manganese15.00alloy

Tel: +86 0714 370 2019 Fax: +86 0714 370 2196 Email : [email protected] #: MD00/4242/0001/3 Expiry date: 28/10/2016

Lingcheng Road No. 2Lingxiang Town, Daye CityHubei Province

Gourp Co., Ltd.DAYE BRANCH

6.50carbon WuhanForgingsWUHAN ZHONGYE YANGLUO HEAVY MACHINERYWUHAN ZHONGYE YANGLUO HEAVY MACHINERYWUHAN ZHONGYE YANGLUO HEAVY MACHINERYWUHAN ZHONGYE YANGLUO HEAVY MACHINERY6.50carbon-manganese6.50alloy

Tel: +86 27 5131 8405 Fax: +86 27 5131 8350 Email : [email protected] #: MD00/4248/0001/3 Expiry date: 29/10/2016

Yangfa North Road No. 3Yangluo Economic Development ZoneWuhan

MANUFACTURING CO., LTD.

11.00carbon JiangyinForgingsWUXI BAOLU HEAVY INDUSTRY CO., LTD.WUXI BAOLU HEAVY INDUSTRY CO., LTD.WUXI BAOLU HEAVY INDUSTRY CO., LTD.WUXI BAOLU HEAVY INDUSTRY CO., LTD.11.00carbon-manganese11.00alloy

Tel +86 510 82239288 Fax +86 510 82255521Email: [email protected]: www.wxfoundry.comCertificate Number MD00/4487/0001/3 Expiry date 03/06/2018

The industry center of QianzhouHuishan DistrictWuxi, Jiangsu, 214181

8.00carbon JiangyinForgingsWUXI HONGDA HEAVY FORGING CO., LTD.WUXI HONGDA HEAVY FORGING CO., LTD.WUXI HONGDA HEAVY FORGING CO., LTD.WUXI HONGDA HEAVY FORGING CO., LTD.8.00carbon-manganese8.00alloy

Tel no. +86 510 85390713 Fax No. +86 510 85953536email: [email protected] Cert No. MD00/4601/0001/3 Expiry date 03/08/2019

Rengang Nanquan Binhu TownBinhu District, Wuxi CityJiangsu Province

20.00carbon JiangyinForgingsWUXI PAIKE NEW MATERIALS TECHNOLOGY Co. Ltd.WUXI PAIKE NEW MATERIALS TECHNOLOGY Co. Ltd.WUXI PAIKE NEW MATERIALS TECHNOLOGY Co. Ltd.WUXI PAIKE NEW MATERIALS TECHNOLOGY Co. Ltd.20.00carbon-manganese20.00alloy

Tel no. +86 510 85585219 Mob. +86 18915289513 Fax No. +86 510 85585239email: [email protected] web: www.wuxipaike.comCert No. MD00/3735/0004/3 Expiry date 24/01/2019

Hudai Industry ParkWuxi CityJiangsu Province, 214161

Lianhe Road

As at 22 December 2017 17Page

Page 18: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

12.00carbon JiangyinForgingsWUXI XINGDA PETRO CHEMICAL FITTINGS Co., Ltd.WUXI XINGDA PETRO CHEMICAL FITTINGS Co., Ltd.WUXI XINGDA PETRO CHEMICAL FITTINGS Co., Ltd.WUXI XINGDA PETRO CHEMICAL FITTINGS Co., Ltd.12.00carbon-manganese12.00alloy2.70austenitic stainless

Tel: +86-519-8615 Fax: +86-519-8615 1615email:[email protected] http://www.wxxingda.com/

Certificate No: MD00/4515/0001/3 Expiry Date: 06/10/2018

Binhu District,Wuxi City,Jiangsu (214064)

Longyan Village,Hudai Town,

16.00carbon WuhanForgingsXINING SPECIAL STEEL CO., LTD.XINING SPECIAL STEEL CO., LTD.XINING SPECIAL STEEL CO., LTD.XINING SPECIAL STEEL CO., LTD.16.00carbon-manganese16.00alloy

Tel: 0086 0971 529 9407 Fax: 0086 0971 529 9248 Email: [email protected]: www.xntg.comCertificate #: MD00/3093/0003/1 Expiry date: 10/03/2019

No. 52 Chaidamu West RoadXiningQinghai Province, 455004

8.00carbon NanjingForgingsXUZHOU ROTHE ERDE RING MILL Co., Ltd.XUZHOU ROTHE ERDE RING MILL Co., Ltd.XUZHOU ROTHE ERDE RING MILL Co., Ltd.XUZHOU ROTHE ERDE RING MILL Co., Ltd.8.00carbon-manganese7.50alloy

Tel: +86 516 8798 0103 Fax: +86 516 8798 8090 Mob +86 15365883071 Email: [email protected]: www.xrem.cnCertificate Number: MD00/3907/0004/3 Expiry date: 24/04/2020

No. 6 Luoshan Road,Xuzhou Economic Development Zone,221004, Jiangsu,

7.50alloy NanjingHeat treatment and machiningof forgings

XUZHOU ROTHE ERDE SLEWING BEARING CO., LTD.XUZHOU ROTHE ERDE SLEWING BEARING CO., LTD.XUZHOU ROTHE ERDE SLEWING BEARING CO., LTD.XUZHOU ROTHE ERDE SLEWING BEARING CO., LTD.

The scope of approval refers to the finish machining and induction surface hardening of ring bearings

Tel: +86-516-8798-9850

Fax: +86-516-8798-9946

Website: www.xreb.com

Certificate No.: MD00/4088/0002/3 Expiry Date: 07/11/2018

15 Luoshan Road,Xuzhou, Jiangsu Province 221004,

0.30carbon Shanghai PortForgingsYADA PIPING SOLUTION CO., LTD.YADA PIPING SOLUTION CO., LTD.YADA PIPING SOLUTION CO., LTD.YADA PIPING SOLUTION CO., LTD.0.30carbon-manganese0.30austenitic stainless0.30duplex stainless*

Tel: +86 573 8312 7333 Fax: +86 573 8312 7133web: www.cnyada.netCertificate No. MD00/4112/0004/3 Expiry Date: 19/01/2019

Xingfeng Industry Park,Jiaxing CityZhejiang

0.03carbon JiangyinForgingsYANCHENG HAITE MACHINERY TECHNOLOGY CO., LTD.YANCHENG HAITE MACHINERY TECHNOLOGY CO., LTD.YANCHENG HAITE MACHINERY TECHNOLOGY CO., LTD.YANCHENG HAITE MACHINERY TECHNOLOGY CO., LTD.0.03carbon-manganese0.03alloy0.03austenitic stainless

Tel: +86 0515 86290308 Fax: +86 0515 86292188email: [email protected] web: www.cnhaite.comCertificate No. MD00/4543/0001/3 Expiry Date: 12/01/2019Heat treatments are sub-contracted.

Jianhu County,Yancheng City,Jiangsu Province, 224700

No. 999, Jianbao Road,

0.26carbon JiangyinForgingsYANCHENG RUI YE HYDRAULIC PIPE FITTINGS CO., LTD.YANCHENG RUI YE HYDRAULIC PIPE FITTINGS CO., LTD.YANCHENG RUI YE HYDRAULIC PIPE FITTINGS CO., LTD.YANCHENG RUI YE HYDRAULIC PIPE FITTINGS CO., LTD.0.26carbon-manganese0.02austenitic stainless

As at 22 December 2017 18Page

Page 19: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel No: +86 515 864 20999 Fax No: +86 515 864 13333Email: [email protected]: http://www.ycrgj.comCert No: MD00/4327/0002/3 Expiry Date 27/05/2020

Jianhu CountyYancheng CityJiangsu Province 224711

Shanggang Industrial Park

0.50carbon WuhanForgingsYICHANG MARINE DIESEL ENGINE CO. LTD.YICHANG MARINE DIESEL ENGINE CO. LTD.YICHANG MARINE DIESEL ENGINE CO. LTD.YICHANG MARINE DIESEL ENGINE CO. LTD.0.50carbon-manganese0.50alloy

Tel: +86 717 646 8870 Fax: +86 717 646 8870Email: [email protected] page: www.ymd.com.cnCertificate #: MD00/1691/0008/3 Expiry date: 14/05/2016

Yichang CityHubei Province443002

93 Xiling No. 2 Road

0.80carbon JiangyinForgingsYIXING WANHUA FLANGE FORGING CO., LTD.YIXING WANHUA FLANGE FORGING CO., LTD.YIXING WANHUA FLANGE FORGING CO., LTD.YIXING WANHUA FLANGE FORGING CO., LTD.0.80carbon-manganese0.80alloy0.80austenitic stainless

Tel No. +86 510 87844555 Email: [email protected]

Certificate No. MD00/4561/0001/3 Expiry date 29/03/2019

Wanshi Town Industrial South Centralized ZoneYixing CityJiangsu

8.00carbon JiangyinForgingsZHANGJIAGANG CITY GUANGDA MACHINERYZHANGJIAGANG CITY GUANGDA MACHINERYZHANGJIAGANG CITY GUANGDA MACHINERYZHANGJIAGANG CITY GUANGDA MACHINERY8.00carbon-manganese8.00alloy

Tel: 0512-58390270 Fax: 0512-58456318

E-mail: [email protected]

Website: www.gdjxdz.net

Certificate No: MD00/4690/0001/3 Expiry Date: 18.06.2020

Anqing Village, Fenghuang Town,Zhangjiagang City, Jiangsu Province.

FORGING Co., LTD

18.00carbon JiangyinForgingsZHANGJIAGANG DESHENG FORGING CO.,LTD.ZHANGJIAGANG DESHENG FORGING CO.,LTD.ZHANGJIAGANG DESHENG FORGING CO.,LTD.ZHANGJIAGANG DESHENG FORGING CO.,LTD.18.00carbon-manganese18.00alloy3.00austenitic stainless

Tel: +86 512 585 15780 Fax: +86 512 858 15082 Email to: [email protected] Web: http://www.dsforging.com Certificate Number: MD00/4486/0001/3 Expiry: 26/05/2018

Hexing, Jinfeng TownZhangjigang CityJiangsu Province 215626

No. 3 Xingyu West Road

16.50carbon JiangyinForgingsZHANGJIAGANG HAIGUO NEW ENERGY EQUIPMENTZHANGJIAGANG HAIGUO NEW ENERGY EQUIPMENTZHANGJIAGANG HAIGUO NEW ENERGY EQUIPMENTZHANGJIAGANG HAIGUO NEW ENERGY EQUIPMENT16.50carbon-manganese7.50alloy2.50austenitic stainless

Tel: +86 0512 58903388 Fax: +86 0512 58903383Email: [email protected]: www.zjghgdj.comCertificate #: MD00/4609/0002/3 Expiry date: 11/09/2019

No. 11 Jinfeng RoadNanfeng Industry ZoneZhangjiagang, Jiangsu, 215628

MANUFACTURING CO., LTD.

8.00carbon JiangyinForgingsZHANGJIAGANG HENGTONG ANNULAR FORGINGZHANGJIAGANG HENGTONG ANNULAR FORGINGZHANGJIAGANG HENGTONG ANNULAR FORGINGZHANGJIAGANG HENGTONG ANNULAR FORGING8.00carbon-manganese8.00alloy2.00austenitic stainless3.50duplex stainless

Tel No. +86 0512 58331214 Fax No: +86 0152 58332696Email: [email protected] No. MD00/4155/0003/3 Expiry date 27/04/2019

No. 3 Feixiang RoadFenghuang Town, ZhangjiagangJiangsu Province

MANUFACTURE Co. LTD.

As at 22 December 2017 19Page

Page 20: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.08carbon JiangyinForgingsZHANGJIAGANG HUARI FLANGE CO., LTD.ZHANGJIAGANG HUARI FLANGE CO., LTD.ZHANGJIAGANG HUARI FLANGE CO., LTD.ZHANGJIAGANG HUARI FLANGE CO., LTD.0.08carbon-manganese0.08alloy0.08austenitic stainless

Tel: +86 512 585 38981 Fax: +86 512 585 70069 Mob +86 18662635959Email: [email protected] Web: http://www.hrflange.net.cnHeat treatment now undertaken in-house.Certificate Number: MD00/3170/0006/3 Expiry date: 25/06/2020

Jinfeng TownZhangjiagang City

No. 44 East Baixiong Road

3.00carbon JiangyinForgingsZHANGJIAGANG ZHONGHUAN HAILUZHANGJIAGANG ZHONGHUAN HAILUZHANGJIAGANG ZHONGHUAN HAILUZHANGJIAGANG ZHONGHUAN HAILU3.00carbon-manganese3.00alloy

Tel: +86 0512 56913102 Fax: +86 0512 58511337Email: [email protected]: www.hlduanjian.comCertificate #: MD00/3546/0004/3 Expiry date: 04/12/2020

SPECIL FORGING CO. , Ltd.Hexing Huashan Road

0.07carbon QingdaoForgingsZHANGQIU CITY SHENGLI FORGING CO., LTD.ZHANGQIU CITY SHENGLI FORGING CO., LTD.ZHANGQIU CITY SHENGLI FORGING CO., LTD.ZHANGQIU CITY SHENGLI FORGING CO., LTD.0.07carbon-manganese

Tel: +86 531 83861504 Fax: +86 531 83879698Email: [email protected] Web site: http://www.slflanges.comCertificate No.: MD00/4667/0001/3 Expiry Date: 02/03/2020

Dongzhao Village Industrial Park, Puji Town,Zhangqiu City, Shandong Province, 250206

72.00carbon Shanghai PortForgingsZHEJIANG DERUN HEAVY INDUSTRY CO., LTD.ZHEJIANG DERUN HEAVY INDUSTRY CO., LTD.ZHEJIANG DERUN HEAVY INDUSTRY CO., LTD.ZHEJIANG DERUN HEAVY INDUSTRY CO., LTD.72.00carbon-manganese30.00alloy

Tel: +86 0572 88464662 Fax: +86 0572 8464668 Mobile +86 139894 92400 Email: [email protected] Web: http://www.zjdrzg.com Certificate Number: MD00/4039/0003/3 Expiry: 19/06/2018

Gouli Village, Xin'an TownDeqing County, Zhejiang ProvincePost Code: 313212

0.11alloy ZhoushanForgingsZHEJIANG JINDUN PRESSURE VESSEL CO., LTD.ZHEJIANG JINDUN PRESSURE VESSEL CO., LTD.ZHEJIANG JINDUN PRESSURE VESSEL CO., LTD.ZHEJIANG JINDUN PRESSURE VESSEL CO., LTD.

Tel: +86 (0)575 82717268 Fax: +86 (0)575 872717268 Mob: +86 13567563172email: [email protected] web: www.jindun.ccApproved for Seamless Steel Gas Cylinders in accordance with EN 1964-1 and ISO 9809-1 only.Certificate #: MD00/3397/0004/3 Expiry date: 09/12/2019

Shangyu CityZhejiang Province312367

Xiaoyue Town

0.50austenitic stainless Shanghai PortForgingsZHEJIANG JIULI HI-TECH METALS CO., LTD.ZHEJIANG JIULI HI-TECH METALS CO., LTD.ZHEJIANG JIULI HI-TECH METALS CO., LTD.ZHEJIANG JIULI HI-TECH METALS CO., LTD.

+86 572 253 9530 Fax: +86 572 253 9396email: [email protected] web: www.jiuli.com

Certificate No: MD00/4723/0001/3 Expiry Date: 17/10/2020

Balidian Town,Wuxing District, Huzhou City,Zhejiang Province

Jiuli Stainless Steel Industrial Park,

25.00carbon WuhanForgingsZHONGYUAN SPECIAL STEEL CO., LTD.ZHONGYUAN SPECIAL STEEL CO., LTD.ZHONGYUAN SPECIAL STEEL CO., LTD.ZHONGYUAN SPECIAL STEEL CO., LTD.25.00carbon-manganese25.00alloy

Tel: +86 (0)391 6099148 Fax: +86 (0)391 6099588email: [email protected]. web http://www.zysw.ccCertificate #: MD00/3032/0005/3 Expiry date: 18/12/2018

Includes EAF/LF/VD steelmaking and ingots in above grades to 40 tonne.

Jiyuan CityHenen ProvinceP.C 454685

As at 22 December 2017 20Page

Page 21: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Czech RepublicCzech RepublicCzech RepublicCzech Republic

6.50carbon PragueForgingsBrück AM spol. s.r.oBrück AM spol. s.r.oBrück AM spol. s.r.oBrück AM spol. s.r.o6.50carbon-manganese6.50alloy

Tel: +420 465 481 285 Fax:+420 465 481 137Email: [email protected] Website: http://www.forge-europe.comCertificate No.: MD00/4666/0001/3 Expiry date: 02/03/2020

Zámrsk 10565 43 Zámrsk

3.50carbon PragueForgingsCZECH PRECISION FORGE A.S.CZECH PRECISION FORGE A.S.CZECH PRECISION FORGE A.S.CZECH PRECISION FORGE A.S.3.50carbon-manganese3.50alloy3.50austenitic stainless

Tel: +420 378 133 802 Fax: +420 378 132 516 email: [email protected] web www.cpforge.comCorporate address: Husova 242/9, 110 00 Prague 1Certificate #: MD00/3049/0005/3 Expiry date: 04/02/2019

301 00 PlzenTylova 1/57

125.00carbon PragueForgingsPILSEN STEEL s.r.o.PILSEN STEEL s.r.o.PILSEN STEEL s.r.o.PILSEN STEEL s.r.o.125.00carbon-manganese125.00alloy

Tel: +420 378 134 225 Mob: +420 603 587 246email: [email protected] web: www.pilsensteel.cz Certificate #: MD00/1383/0006/3 Expiry date: 22/03/2020

316 00 PlzenTylova 1/57

8.00carbon PragueForgingsVITKOVICE HAMMERING a.s.VITKOVICE HAMMERING a.s.VITKOVICE HAMMERING a.s.VITKOVICE HAMMERING a.s.8.00carbon-manganese8.00alloy

Tel No: +420 595 956 687 Fax No: +420 595 954 540

E-mail: [email protected]

Website: www. vitkovice.cz

Certificate No. MD00/4165/0002/3 Expiry date: 22/05/19

703 00, Ostrava - VítkoviceRuska 2887/101,

70.00carbon PragueForgingsVITKOVICE HEAVY MACHINERY a.s.VITKOVICE HEAVY MACHINERY a.s.VITKOVICE HEAVY MACHINERY a.s.VITKOVICE HEAVY MACHINERY a.s.70.00carbon-manganese70.00alloy

Tel: +420 595 953 153 Mob: +420 602 535 608 email: [email protected] web: www.vitkovice.cz

Certificate #: MD00/2020/0010/3 Expiry date: 29/03/2020

Including steelmaking, combined web and pin crankshafts and semi built crankshafts by die forge method up to 4 Tonne.

Ruska 2887/10170300 Ostrava-Vitkovice

10.00carbon PragueForgingsZDAS a.s. - Metallurgy DivisionZDAS a.s. - Metallurgy DivisionZDAS a.s. - Metallurgy DivisionZDAS a.s. - Metallurgy Division10.00carbon-manganese10.00alloy

Tel: +420 566 643 998 Mobile: +42 602 795 859 Email: mailto:[email protected] Web:http://www.zdas.czIncluding steelmaking.Certificate #: MD00/1697/0008/3 Expiry date: 23/08/2020

Strojirenska 675/659101 Zdar nad Sazavou

Metallurgical Plant

2.00carbon PragueForgingsZVU KOVÁRNA a.s.ZVU KOVÁRNA a.s.ZVU KOVÁRNA a.s.ZVU KOVÁRNA a.s.2.00carbon-manganese2.00alloy

Tel: +420 495 822 375 Fax: +420 495 822 806 Mob: +420 604236105Email: [email protected] Web: www.kovarna.czCertificate #: MD00/2295/0008/3 Expiry date: 01/03/2020

Prazska Trida 322/4P.O. Box 21501 47 Hradec Kralove

(ZVU Forge Plant Ltd.)

As at 22 December 2017 21Page

Page 22: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

FinlandFinlandFinlandFinland

2.50alloy Turku/ÅboForgingsKOMAS OY TAKOMOKOMAS OY TAKOMOKOMAS OY TAKOMOKOMAS OY TAKOMO

Tel: +358 40 734 2786email: [email protected] web: www.komas.fiCertificate No MD00/4523/0001/3 Expiry Date: 22/10/2018

Approved for the supply of forged blanks for the maufacture of gearing. Not approved for final heat treatment or surface hardening treatments.

Onkapannu 4,40700 Jyväskylä

FranceFranceFranceFrance

70.00carbon LyonForgingsAKERS FRANCEAKERS FRANCEAKERS FRANCEAKERS FRANCE70.00carbon-manganese70.00alloy

Including steelmakingTel: +33 6 79 27 94 41 e mail: mailto:[email protected] web: http://www.akersrolls.comCertificate #: MD00/3386/0005/3 Expiry date: 26/05/2017

B.P. 1020057104 Thionville Cedex

USINE DE THIONVILLEChemin du Leidt

0.03carbon LyonForgingsANDRÉ LAURENTANDRÉ LAURENTANDRÉ LAURENTANDRÉ LAURENT0.03carbon-manganese0.03alloy0.03martensitic stainless*

Tel No.0033 (0) 4 77593280 Fax No. 0033 (0) 4 77806264

E-mail: [email protected]

Website: www.andre-laurent.fr

Cert No. MD00/3646/0005/3 Expiry date: 12/12/2019

ZI du Bayon - BP 2742150La Ricamarie

250.00carbon LyonForgingsAREVA CREUSOT FORGEAREVA CREUSOT FORGEAREVA CREUSOT FORGEAREVA CREUSOT FORGE250.00carbon-manganese250.00alloy250.00austenitic stainless

Tel:+33 3 85 80 07 73 Mobile: +33 6 84 74 58 42 Email:mailto:[email protected]

Certificate #: MD00/2978/0005/3 Expiry date: 26/02/2018

6 allée Jean Perrin BP 11271200 LE CREUSOT

0.01carbon LyonForgingsATELIERS DES JANVESATELIERS DES JANVESATELIERS DES JANVESATELIERS DES JANVES0.01carbon-manganese0.01alloy

Tel: +33 324 53 9482 Fax: +33 324 32 0207 Email: maitlto:[email protected] Web: http://www.ateliers-janves.frCertificate #: MD00/2869/0006/3 Expiry date: 30/03/2020

Avenue des MargueritesB.P. 4408120 Bogny-sur-Meuse

Z.I. de Braux

45.00carbon LyonForgingsAUBERT & DUVALAUBERT & DUVALAUBERT & DUVALAUBERT & DUVAL45.00carbon-manganese45.00alloy25.00austenitic stainless22.00duplex stainless*

Tel: +33 4 77 40 37 41 Email [email protected] Website: http://www.aubertduval.com*Accepted for approved applications.Certificate Number: MD00/1770/0008/3 Expiry: 25/09/2015

BP 14142704 FIRMINY CEDEX

Firminy Plant

As at 22 December 2017 22Page

Page 23: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

20.00carbon LyonForgingsAUBERT & DUVALAUBERT & DUVALAUBERT & DUVALAUBERT & DUVAL20.00carbon-manganese20.00alloy20.00austenitic stainless

Tel: +33 4 73 67 31 27email: [email protected] www.aubertduval.comCertificate No: MD00/4537/0001/3 Expiry Date: 21/12/2018

BP 163770 Les Ancizes

Aciéries des Ancizes

0.01austenitic stainless LyonForgingsBECK TECHNOLOGIES S.A.SBECK TECHNOLOGIES S.A.SBECK TECHNOLOGIES S.A.SBECK TECHNOLOGIES S.A.S

Tel: +33 3 84 49 90 02 Email: [email protected].

Certificate #: MD00/4274/0002/3 Expiry date: 28/12/2019

La ChaudeauBP 1070320 Aillevillers

0.20carbon LyonForgingsCOUSIN MALICETCOUSIN MALICETCOUSIN MALICETCOUSIN MALICET0.20carbon-manganese

Tel: +33 3 24 37 15 15 Fax: +33 324 323040Contact: Fabien FrereEmail: [email protected]: www.beck-industries.comCertificate #: MD00/4189/0002/3 Expiry date: 24/06/2019

23 Rue Bernisseaux08120 Bogny sur Meuse

1.21carbon LyonForgingsFORGE DE CUSTINES ET DE TRIE-CHÂTEAUFORGE DE CUSTINES ET DE TRIE-CHÂTEAUFORGE DE CUSTINES ET DE TRIE-CHÂTEAUFORGE DE CUSTINES ET DE TRIE-CHÂTEAU1.21carbon-manganese0.30alloy0.30austenitic stainless0.23martensitic stainless*

Tel: +33 3 83 49 49 56 Mob: +33 6 32 06 15 74email: [email protected] web: www.lebronze-alloys.com

Certificate No: MD00/4639/0001/3 Expiry No:02/09/2019

208, Boulevard de Finlande,54670 CUSTINES,

Usine de CUSTINES

45.00carbon LyonForgingsFORGITAL DEMBIERMONT S.A.S.FORGITAL DEMBIERMONT S.A.S.FORGITAL DEMBIERMONT S.A.S.FORGITAL DEMBIERMONT S.A.S.45.00carbon-manganese45.00alloy45.00austenitic stainless

Tel: +33 3 2769 7581 Fax: +33 3 2769 7345 email: [email protected] web: www.forgital.com

Certificate #: MD00/0527/0008/3 Expiry date: 04/08/2020

4, Rue Jules CampagneBP 8959330 Hautmont

0.01alloy LyonForgingsGASCARD MARTIN PROSTGASCARD MARTIN PROSTGASCARD MARTIN PROSTGASCARD MARTIN PROST

Tel: +33 3 25 84 00 16 Fax: +33 3 25 90 37 35 Email: [email protected] No: MD00/4428/0001/3 Expiry date: 29/01/2018Approved for close die forging with the maximum weight of 1.4kg only

1, Chemin de Vivet52360 NEUILLY L'EVEQUE

BP1

0.30carbon LyonForgingsL'UNION DES FORGERONSL'UNION DES FORGERONSL'UNION DES FORGERONSL'UNION DES FORGERONS0.30carbon-manganese0.30alloy0.30austenitic stainless

Tel: +33 (0) 1 64 95 02 25 Fax: +33 (0) 1 64 95 09 89 Email: mailto:[email protected] Web: http://www.union-des-forgerons.frCertificate #: MD00/3229/0004/3 Expiry date: 24/03/2018

BP 16 - Z.A.91660 Méréville

12 Rue De La Pierre Follège

0.45alloy LyonForgingsLEBRONZE ALLOYSLEBRONZE ALLOYSLEBRONZE ALLOYSLEBRONZE ALLOYS

Tel: +33 3 2769 7581 Fax: +33 3 2769 7345 Email mailto:[email protected] Web: www.forgital.comCertificate No: MD00/4102/0003/3 Expiry date: 13/12/2020

27720 DanguUsine de Dangu

As at 22 December 2017 23Page

Page 24: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.25carbon LyonForgingsMANOIR BOUZONVILLEMANOIR BOUZONVILLEMANOIR BOUZONVILLEMANOIR BOUZONVILLE0.25carbon-manganese0.11alloy

Tel: +33 38739 7857 Email: [email protected]: www.manoir.eu.com

Certificate: MD00/4695/0001/3 Expiry Date: 17/08/2020

Route de Guerstling57320 Bouzonville

3.00carbon LyonForgingsSBSSBSSBSSBS3.00carbon-manganese3.00austenitic stainless

Tel: +33 4 77 96 80 00 Fax: +33 4 77 96 80 50 Email: [email protected] #: MD00/1043/0009/3 Expiry date: 04/09/2020

BP 642130 Boën sur Lignon

La Gare

0.10carbon LyonForgingsSETFORGE LA CLAYETTE SOCIETE NOUVELLESETFORGE LA CLAYETTE SOCIETE NOUVELLESETFORGE LA CLAYETTE SOCIETE NOUVELLESETFORGE LA CLAYETTE SOCIETE NOUVELLE0.10carbon-manganese0.10alloy

+33 (0)3 85 28 40 16 Fax: +33 (0)3 85 28 40 01 Mob: +33 (0)6 89 95 06 78email: [email protected] web: www.farina.com

Certificate No: MD00/4661/0001/3 Expiry Date: 18/12/2018

718000 La Clayette

GermanyGermanyGermanyGermany

8.00carbon HamburgForgingsANKER SCHROEDER ASDO GmbHANKER SCHROEDER ASDO GmbHANKER SCHROEDER ASDO GmbHANKER SCHROEDER ASDO GmbH8.00carbon-manganese8.00alloy

Tel: +49 (0)231 51701 16 Fax: +49 (0)231 51701-816email: [email protected] web: www.anker.de

Certificate No. MD00/0107/0008/3 Expiry date: 17/11/2019

Hannöversche Straße 4844143 Dortmund

3.50carbon HamburgForgingsBAHNTECHNIK BRAND-ERBISDORF GmbHBAHNTECHNIK BRAND-ERBISDORF GmbHBAHNTECHNIK BRAND-ERBISDORF GmbHBAHNTECHNIK BRAND-ERBISDORF GmbH3.50carbon-manganese3.50alloy

Tel: +49 (0) 3 7322 473579 Fax: +49 (0)3 7322 473393 Email mail: [email protected] Web http://www.bt-be.deCertificate No. MD00/3147/0005/3 Expiry date: 06/01/2018

D-09618 Brand-ErbisdorfBerthelsdorfer Str. 8

10.00carbon HamburgForgingsBGH EDELSTAHL LIPPENDORF GmbHBGH EDELSTAHL LIPPENDORF GmbHBGH EDELSTAHL LIPPENDORF GmbHBGH EDELSTAHL LIPPENDORF GmbH10.00carbon-manganese10.00alloy10.00austenitic stainless10.00martensitic stainless*

Tel: +49 (0) 343 42 670 Fax: +49 (0) 343 42 67230 Email: [email protected] Web: http://www.bgh.de* accepted for approved applicationsCertificate No. MD00/0145/0008/3 Expiry date: 06/11/2020

04575 LippendorfHauptstraße 100

51.00carbon HamburgForgingsBGH EDELSTAHL SIEGEN GmbHBGH EDELSTAHL SIEGEN GmbHBGH EDELSTAHL SIEGEN GmbHBGH EDELSTAHL SIEGEN GmbH51.00carbon-manganese51.00alloy28.00austenitic stainless8.00duplex stainless*28.00martensitic stainless*

Tel No. +49 (0)271 701-341 Fax No. +49 (0) 271 701376Email [email protected] www.bgh.deCertificate No. MD00/3767/0005/3 Expiry date: 30/03/2019

Industriestraße 9,D-57076Siegen

As at 22 December 2017 24Page

Page 25: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

95.00carbon HamburgForgingsBUDERUS EDELSTAHL GmbHBUDERUS EDELSTAHL GmbHBUDERUS EDELSTAHL GmbHBUDERUS EDELSTAHL GmbH95.00carbon-manganese95.00alloy95.00austenitic stainless95.00martensitic stainless*

Tel: +49 (0)6441 374 2686 Fax: +49 (0)6441 374 2681 Email: mailto: [email protected] Web: http://www.buderus-steel.com

*accepted for approved applicationsCertificate No. MD00/0257/0010/3 Expiry date: 06/07/2020

Buderusstraße 25D-35573 Wetzlar

26.00carbon HamburgForgingsBrück GmbH EnsheimBrück GmbH EnsheimBrück GmbH EnsheimBrück GmbH Ensheim26.00carbon-manganese26.00alloy26.00austenitic stainless26.00duplex stainless

Tel: +49 6893 84 414 email: [email protected] web: www.bruck-forgings.com

Certificate No. MD00/0250/0008/3 Expiry date: 04/10/2019

Brückstrasse 16EnsheimD 66131 Saarbrücken

Spezialfabrik für Rohrverbindungen

3.00carbon HamburgForgingsCHR. HÖVER & SOHN GMBH & CO. KGCHR. HÖVER & SOHN GMBH & CO. KGCHR. HÖVER & SOHN GMBH & CO. KGCHR. HÖVER & SOHN GMBH & CO. KG3.00carbon-manganese3.00alloy3.00austenitic stainless

Tel: +49 2266 95 0 Fax: +49 2266 4371 email: [email protected] web: www.leppe-edelstahl.comCertificate No. MD00/0700/0007/3 Expiry date: 08/10/2019

Oberleppe 14D-51789 Lindlar

27.00carbon HamburgForgingsDEUTSCHE EDELSTAHLWERKEDEUTSCHE EDELSTAHLWERKEDEUTSCHE EDELSTAHLWERKEDEUTSCHE EDELSTAHLWERKE27.00carbon-manganese27.00alloy27.00austenitic stainless27.00duplex stainless27.00martensitic stainless*

Tel: +49 (0) 2302 294105email: [email protected] web: www.dew-stahl.comCertificate No. MD00/1853/0011/3 Expiry date: 20/01/2019

Oberschlesienstraße 16D-47807 Krefeld

SPECIALTY STEEL GmbH & Co. KGWorks Krefeld

1.50carbon HamburgForgingsDEUTSCHE EDELSTAHLWERKEDEUTSCHE EDELSTAHLWERKEDEUTSCHE EDELSTAHLWERKEDEUTSCHE EDELSTAHLWERKE1.50carbon-manganese1.50alloy1.50austenitic stainless1.50duplex stainless1.50martensitic stainless*

Tel: +49 (0) 2302 294 131 Fax: +49 (0) 2302 294 662 Email:mailto:[email protected] Web:http://www.dew-stahl.comCertificate No. MD00/2075/0011/3 Expiry date: 20/01/2019

Auestraße 4D-58452 Witten

SPECIALTY STEEL GmbH & Co. KGWorks Witten

0.05alloy HamburgForgingsEWALD WAFFENSCHMIDT GmbH & Co. KGEWALD WAFFENSCHMIDT GmbH & Co. KGEWALD WAFFENSCHMIDT GmbH & Co. KGEWALD WAFFENSCHMIDT GmbH & Co. KG0.05austenitic stainless

Tel: +49 (0)2762 92660 Email:mailto:[email protected] www.waffenschmidt.deCertificate No. MD00/0470/0007/3 Expiry date: 16/03/2018

Otto-Hahn-Str. 6D-57482 Wenden

0.37carbon HamburgForgingsFLANSCHENWERK BEBITZ GmbH.FLANSCHENWERK BEBITZ GmbH.FLANSCHENWERK BEBITZ GmbH.FLANSCHENWERK BEBITZ GmbH.0.37carbon-manganese0.37alloy0.37austenitic stainless0.37duplex stainless*

Tel: +49 (0)34691-40-244 Fax: +49 (0)34691-40-327 Email: mailto:[email protected] Web: http://www.bebitz.deCertificate No. MD00/0497/0007/3 Expiry date: 06/10/2017

Lebendorfer Straße 1D-06420 Bebitz

As at 22 December 2017 25Page

Page 26: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

2.00carbon HamburgForgingsFRITZ BAUMANN GmbH + Co.KGFRITZ BAUMANN GmbH + Co.KGFRITZ BAUMANN GmbH + Co.KGFRITZ BAUMANN GmbH + Co.KG2.00carbon-manganese2.00alloy

Tel: +49 (0)7135 950326 Fax: +49 (0)7135 9503-13email: [email protected] web: www.hammerwerk-baumann-kg.deCertificate No. MD00/0648/0010/3 Expiry date: 01/06/2020

74363 Güglingen FrauenzimmernKappelrain 4

0.08carbon-manganese HamburgForgingsGEDORE WERKZEUGFABRIK GmbH & Co. KGGEDORE WERKZEUGFABRIK GmbH & Co. KGGEDORE WERKZEUGFABRIK GmbH & Co. KGGEDORE WERKZEUGFABRIK GmbH & Co. KG0.08alloy

Tel: +49 2191 986-23 Fax: +49 2191 986 99

E-mail: [email protected]

Website: www.gedore.com

Certificate No. MD00/0895/0008/3 Expiry date: 29/01/2020

Lange Str. 7AD-42857 Remscheid

0.65carbon HamburgForgingsGEORG UMFORMTECHNIK GMBHGEORG UMFORMTECHNIK GMBHGEORG UMFORMTECHNIK GMBHGEORG UMFORMTECHNIK GMBH0.65carbon-manganese0.65alloy

Tel: +49 (0) 2687 892-66 Fax: +49 (0) 2687 892-68 email: [email protected] web: www.georg-umformtechnik.deCertificate No. MD00/0436/0007/3 Expiry date: 27/09/2018

Grubenstraße 5D-56594 Willroth

0.08carbon HamburgForgingsGESENKSCHMIEDE SCHNEIDER GmbH.GESENKSCHMIEDE SCHNEIDER GmbH.GESENKSCHMIEDE SCHNEIDER GmbH.GESENKSCHMIEDE SCHNEIDER GmbH.0.08carbon-manganese0.08alloy0.08austenitic stainless

Tel: +49 (0)7361 597672 Fax: +49 (0)7361 597102 email: [email protected] web: www.gsa-aalen.de

Certificate No. MD00/0598/0008/3 Expiry date: 15/02/2018

Ulmer Str 112D-73431 Aalen

0.35carbon HamburgForgingsGROßENHAINER GESENK- UND FREIFORMSCHMIEDE GmbHGROßENHAINER GESENK- UND FREIFORMSCHMIEDE GmbHGROßENHAINER GESENK- UND FREIFORMSCHMIEDE GmbHGROßENHAINER GESENK- UND FREIFORMSCHMIEDE GmbH0.35carbon-manganese0.35alloy

Tel: +49 3522 350 17 Fax: +49 3522 631 53 email: [email protected] web:www.ggf-schmiede.deCertificate No. MD00/2029/0007/3 Expiry date: 06/07/2019

Öhringer Str. 24-26D-01558 Großenhain

10.00carbon HamburgForgingsGUSTAV GRIMM EDELSTAHLWERK GMBH & CO. KGGUSTAV GRIMM EDELSTAHLWERK GMBH & CO. KGGUSTAV GRIMM EDELSTAHLWERK GMBH & CO. KGGUSTAV GRIMM EDELSTAHLWERK GMBH & CO. KG10.00carbon-manganese10.00alloy10.00austenitic stainless10.00duplex stainless*10.00martensitic stainless*

Tel: +49 (0)2191 435 342 Fax: +49 (0)2191 435 285 email: [email protected] Web: www.gustav-grimm.deCertificate No. MD00/0613/0009/3 Expiry date: 18/09/2019

D-42855 RemscheidRonsdorfer Straße 172-174

15.00carbon HamburgForgingsHAMMERWERK ERFTHAMMERWERK ERFTHAMMERWERK ERFTHAMMERWERK ERFT15.00carbon-manganese15.00alloy

Tel: 0049 (0)2253 311-145 Fax: 0049 (0)2253 311-174 Email: mailto:[email protected] Web http://www.hammerwerk-erft.deCertificate No. MD00/0647/0007/3 Expiry date: 03/05/2018

D-53902 Bad Münstereifel-Arloff

G. Diederichs GmbH & Co. KGErnst-Diederichs Strasse 1

0.08carbon HamburgForgingsHAMMERWERK FRIDINGEN GMBHHAMMERWERK FRIDINGEN GMBHHAMMERWERK FRIDINGEN GMBHHAMMERWERK FRIDINGEN GMBH0.08carbon-manganese0.08alloy0.08austenitic stainless

As at 22 December 2017 26Page

Page 27: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +49 7463 81 201 Fax: +49 7463 8130 201 email: [email protected] web www.hammerwerk.deCertificate No.MD00/0646/0008/3 Expiry date: 23/07/2019

Dr.-Werner-Esser-Str. 178567 Fridingen an der Donau

0.40alloy HamburgForgingsIPP VAN TRIEL GMBHIPP VAN TRIEL GMBHIPP VAN TRIEL GMBHIPP VAN TRIEL GMBH

Tel: +49 (0) 201 869 11 0 Fax: +49 (0) 201 869 1134 Email: mailto: [email protected]: http://www.vantriel.deCertificate Number: MD00/0654/0007/3 Expiry: 27/01/2019

Ripshorster Str. 460D-45357 Essen

35.00carbon HamburgForgingsKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)202 265130 Fax: +49 (0)202 603069 Email mailto:[email protected] Web http://www.attin.deCertificate No. MD00/0126/0009/3 Expiry date: 13/09/2019

Dieselstaße 26D-42389 Wuppertal-Langerfeld

Oswald Attin KGStahlhammerwerk

35.00carbon HamburgForgingsKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)2191 593 216 Fax: +49 (0)2191 593 208 email: [email protected] web: www.dirostahl.deCertificate No. MD00/0408/0007/3 Expiry date: 13/09/2019

Luckhauser Straße 1-5D-42899 Remscheid

Karl Diederichs KGStahl-, Walz- und Hammerwerk

35.00carbon HamburgForgingsKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)2191 593 216 Fax: +49 (0)2191 593 208 email [email protected] web www.jansenstahl.deCertificate No. MD00/0788/0009/3 Expiry date: 13/09/2019

Walter-Freitag-Straße 37

August Jansen KGStahl- und Hammerwerk

35.00carbon HamburgForgingsKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS GroupKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)202 6087521 Fax: +49 (0)202 6087 5821 Email:[email protected] Web http://www.soenneckenstahl.deCertificate No. MD00/1401/0008/3 Expiry date: 14/09/2016

Blombacher Bach 12D-42287 Wuppertal

Wilh. Sönnecken KGStahlhammerwerk

0.13carbon HamburgForgingsKB SCHMIEDETECHNIK GmbHKB SCHMIEDETECHNIK GmbHKB SCHMIEDETECHNIK GmbHKB SCHMIEDETECHNIK GmbH0.13carbon-manganese0.13alloy0.13austenitic stainless

Tel: +49 (0)2331 3508-19 Fax: +49 (0)2331 3508-30 Email:[email protected] Web:www.kb-schmiedetechnik.deCertificate No. MD00/0858/0007/3 Expiry date: 14/08/2017

Buschmühlenstraße 62D-58093 Hagen-Halden

5.50carbon HamburgForgingsKOLLMEDER SCHMIEDE- und PRESSWERK GmbH & CO.KGKOLLMEDER SCHMIEDE- und PRESSWERK GmbH & CO.KGKOLLMEDER SCHMIEDE- und PRESSWERK GmbH & CO.KGKOLLMEDER SCHMIEDE- und PRESSWERK GmbH & CO.KG5.50carbon-manganese14.00alloy

Tel No: +49 871 975390 Fax No: +49 871 9753940email: [email protected] web: www.kollmeder-presswerk.deCertificate No MD00/3870/0003/3 Expiry Date 01/01/2020

Zettlstraße 1D-84030Ergolding

0.01carbon HamburgForgingsMAHLE Motorkomponenten GmbHMAHLE Motorkomponenten GmbHMAHLE Motorkomponenten GmbHMAHLE Motorkomponenten GmbH0.01carbon-manganese0.01alloy

As at 22 December 2017 27Page

Page 28: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +49 (0)2391 814-35150 Fax: +49 (0) 711 501 44 35150 email: [email protected] web: www.mahle.com

Certificate No. MD00/0247/0008/3 Expiry date: 20/11/2017

Including precipitation hardened forgings for approved applications.

In den Hofwiesen 13D-58840 Plettenberg

17.00carbon HamburgForgingsMASCHINENFABRIK ALFING KESSLER GmbHMASCHINENFABRIK ALFING KESSLER GmbHMASCHINENFABRIK ALFING KESSLER GmbHMASCHINENFABRIK ALFING KESSLER GmbH17.00carbon-manganese17.00alloy3.67martensitic stainless*

Tel: +49 7361 501-4435 Fax: +49 7361 501-1970

E-mail: ingo.gerneth@@mafa.alfing.de

Website: www.alfing.de

Including crankshafts with a K factor >=1.0 for approved applications. Closed die and continuous grain flow forged crankshafts with a K factor K1 = 1.05

Closed die and continuos grain flow forged crankshafts made with Alfing Clean Steel with a K factor K1 = 1.15 for alloy steel with a minimum tensile strengthrequirement of 850 MPa.-Plus induction hardening including fillets K2 = 1.15- Plus hammer peening process K2=1.20- Plus Nitriding including fillets K2 = 1.25

Materials Quality Scheme Approved - Approval No. MQS 023

Certificate No. MD00/0091/0009/3 Expiry date: 12/07/2019

WasseralfingenAuguste-Kessler Str. 20D-73433 Aalen

1.50carbon HamburgForgingsPLATESTAHL UMFORMTECHNIK GmbHPLATESTAHL UMFORMTECHNIK GmbHPLATESTAHL UMFORMTECHNIK GmbHPLATESTAHL UMFORMTECHNIK GmbH1.50carbon-manganese1.50alloy1.50austenitic stainless1.50duplex stainless

Tel +49 2351 4390 Fax: +49 2351 439 355Email: [email protected] Web: www.platestahl.comCertificate No. MD00/4622/0001/3 Expiry date: 12/10/2019

58513 LüdenscheidPlatehofstraße 1

0.12carbon HamburgForgingsRICHARD NEUMAYER GESELLSCHAFTRICHARD NEUMAYER GESELLSCHAFTRICHARD NEUMAYER GESELLSCHAFTRICHARD NEUMAYER GESELLSCHAFT0.12carbon-manganese0.12alloy0.05austenitic stainless0.05duplex stainless

Tel: +49 (0)7831 803 982 Fax: +49 (0)7831 803 66

E-mail: [email protected]

Website: www.r-neumayer.de

Certificate No. MD00/3509/0005/3 Expiry date: 26/05/2020

Hinterer Bahnhof 15D-77756 Hausach

FÜR UMFORMTECHNIK mbH

4.00carbon HamburgForgingsROSSWAG GmbHROSSWAG GmbHROSSWAG GmbHROSSWAG GmbH4.00carbon-manganese4.00alloy4.00austenitic stainless4.00duplex stainless4.00martensitic stainless*

Tel: +49 7240 94142 Email: mailto: [email protected] Web page http://www.edelsthal-rosswag.de* accepted for approved applicationsCertificate No. MD00/0435/0009/3 Expiry date: 05/07/2018

76327 PfinztalAugust-Roßwag-Straße 1

120.00carbon HamburgForgingsSAARSCHMIEDE GmbH FREIFORMSCHMIEDESAARSCHMIEDE GmbH FREIFORMSCHMIEDESAARSCHMIEDE GmbH FREIFORMSCHMIEDESAARSCHMIEDE GmbH FREIFORMSCHMIEDE120.00carbon-manganese

Tel:+49 (0)6898 10 2215 Fax:+49(0)6898 10 5 2215 email: [email protected] web: www.saarschmiede.com

Certificate No. MD00/2017/0008/3 Expiry date: 12/05/2020

Bismarckstraße 57-59D-66330 Völklingen

As at 22 December 2017 28Page

Page 29: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.40carbon HamburgForgingsSCHMIEDAG GmbHSCHMIEDAG GmbHSCHMIEDAG GmbHSCHMIEDAG GmbH0.40carbon-manganese0.40alloy0.40austenitic stainless

Tel: +49 (0)2331 128-300 Fax: +49 (0)2331 128-234 Email to: [email protected]; [email protected]; [email protected]: http://www.schmiedag.deCertificate No. MD00/0120/0008/3 Expiry date: 07/10/2017

D-58089 HagenGrüntaler Straße 11

45.00carbon HamburgForgingsSCHMIEDEWERKE GRÖDITZ GmbHSCHMIEDEWERKE GRÖDITZ GmbHSCHMIEDEWERKE GRÖDITZ GmbHSCHMIEDEWERKE GRÖDITZ GmbH45.00carbon-manganese45.00alloy45.00austenitic stainless

Tel: +49 (0) 35263 62970 Fax: +49 (0) 35263 62973 EMail mailto: [email protected] Web page http://www.stahl-groeditz.deThe scope of approval includes crankshafts produced by conventional forging in the material grades and to the maximum weight detailed above, and also forcrankshafts produced by the TR Process in alloy steel grades only to a maximum weight of 42 Tonnes.Certificate No. MD00/0615/0012/3 Expiry date: 11/03/2020

D-01609 GröditzRiesaer Straße 1

1.10carbon HamburgForgingsSIEPMANN-WERKE GmbH & Co.KGSIEPMANN-WERKE GmbH & Co.KGSIEPMANN-WERKE GmbH & Co.KGSIEPMANN-WERKE GmbH & Co.KG1.10carbon-manganese1.10alloy1.10austenitic stainless

Tel: +49 2902 762 567 Fax: +49 2902 762 633 Email: mailto:[email protected] Web:http://www.siepmann.deCertificate #: MD00/1378/0008/3 Expiry date: 07/05/2017

Emil-Siepmann-Str. 28D-59581 Warstein

0.35carbon HamburgForgingsSONA BLW PRÄZISIONSSCHMIEDE GMBHSONA BLW PRÄZISIONSSCHMIEDE GMBHSONA BLW PRÄZISIONSSCHMIEDE GMBHSONA BLW PRÄZISIONSSCHMIEDE GMBH0.35carbon-manganese0.35alloy

Tel: +49 0203/732-390 Fax: +49 0203/732 267 email: [email protected] web www.sona-blw.comCertificate #: MD00/2210/0007/3 Expiry date: 08/05/2019

Friemersheimer Straße 40D-47249 Duisburg

Werk Duisburg

35.00carbon HamburgForgingsSSK VON SCHAEWEN GmbHSSK VON SCHAEWEN GmbHSSK VON SCHAEWEN GmbHSSK VON SCHAEWEN GmbH35.00carbon-manganese35.00alloy

Tel: +49 201 8110 432 Fax: +49 201 8110 449Email: [email protected]: www.von-schaewen.deCertificate #: MD00/3540/0002/3 Expiry date: 14/11/2017

Ruhrstrasse 2158300 Wetter

20.00carbon HamburgForgingsSSK VON SCHAEWEN HÜCKESWAGEN GmbHSSK VON SCHAEWEN HÜCKESWAGEN GmbHSSK VON SCHAEWEN HÜCKESWAGEN GmbHSSK VON SCHAEWEN HÜCKESWAGEN GmbH20.00alloy

Tel: +49 (0)201 81 10 477 Fax: +49 (0)201 81 10 41 email: [email protected] web: www.von-schaewen.deCertificate #: MD00/1284/0008/3 Expiry date: 13/03/2019

Stahlschmidtsbrücke 20D-42499 Hückeswagen

Schmiedewerk Hückeswagen

5.00carbon HamburgForgingsSTAHLHAMMER BOMMERN GMBHSTAHLHAMMER BOMMERN GMBHSTAHLHAMMER BOMMERN GMBHSTAHLHAMMER BOMMERN GMBH5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +49 (0)2381 91498-43 Fax: +49 (0)2381 91498-21

E-Mail: [email protected]

Website: www.stahlhammer.de

Certificate #: MD00/1422/0008/3 Expiry date: 19/01/2019

Member of COLUMBUS McKINNON CorporationCarl-Zeiss Strasse 7D-59077 Hamm

5.00carbon HamburgForgingsSchmidt + Clemens GmbH +Co. KGSchmidt + Clemens GmbH +Co. KGSchmidt + Clemens GmbH +Co. KGSchmidt + Clemens GmbH +Co. KG5.00carbon-manganese5.00alloy5.00austenitic stainless

As at 22 December 2017 29Page

Page 30: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel No: +49 (0) 22 66 92 426 Fax No: +49 (0) 22 66 92 84 26email: [email protected] web: www.schmidt-clemens.deCertificate No: MD00/1319/0002/3 Expiry date 09/10/2019

D-51789 LindlarKaiserau 2

0.03carbon HamburgForgingsSchmiedetechnik Plettenberg GmbH & Co.KGSchmiedetechnik Plettenberg GmbH & Co.KGSchmiedetechnik Plettenberg GmbH & Co.KGSchmiedetechnik Plettenberg GmbH & Co.KG0.03carbon-manganese0.03alloy0.03austenitic stainless

Tel: +49 2391 816 222 Fax: +49 2391 816 700 Email: [email protected] Web: http://www.stplettenberg.deCertificate Number: MD00/1205/0007/3 Expiry: 22/03/2018

Daimlerstraße 9D-58840 Plettenberg

0.05carbon HamburgForgingsTHIELE GmbH & CO. KGTHIELE GmbH & CO. KGTHIELE GmbH & CO. KGTHIELE GmbH & CO. KG0.05carbon-manganese

Tel: +49 (0)2371 947 377 Fax: +49 (0)2371 947 234 Mobile: +49 151 16709191 Email: mailto:[email protected] Web: http://www.thiele.deCertificate #: MD00/1513/0008/3 Expiry date: 02/07/2018

Werkstr. 3D-58640 Iserlohn

Iserlohn-Kalthof

15.00carbon HamburgForgingsTHYSSEN KRUPP ROTHE ERDE GmbHTHYSSEN KRUPP ROTHE ERDE GmbHTHYSSEN KRUPP ROTHE ERDE GmbHTHYSSEN KRUPP ROTHE ERDE GmbH15.00carbon-manganese15.00alloy15.00austenitic stainless

Tel: +49 (0)231 186 2244 Fax: +49 (0)231 186 2548 Certificate No. MD00/0684/0007/3 Expiry: 03/05/2018

Tremoniastraße 5-11D-44137 Dortmund

0.25carbon HamburgForgingsThyssenKrupp Gerlach GmbHThyssenKrupp Gerlach GmbHThyssenKrupp Gerlach GmbHThyssenKrupp Gerlach GmbH0.25carbon-manganese0.25alloy

Tel: +49 6841 107 421 Fax: +49 6841 107 88421 Email:[email protected] Web:http://www.thyssenkrupp.comThe scope of approval includes for crankshafts to the above maximum weight.Certificate Number: MD00/0597/0008/3 Expiry date: 14/10/2017

Postfach 1252D 66403 Homburg

Neue Industriestrasse

0.03carbon HamburgForgingsWARMPRESSWERK MAX B. SCHACHMANN GmbHWARMPRESSWERK MAX B. SCHACHMANN GmbHWARMPRESSWERK MAX B. SCHACHMANN GmbHWARMPRESSWERK MAX B. SCHACHMANN GmbH0.03carbon-manganese0.03alloy

Tel: +49 (0)6596 790 Fax: +49 (0)6956 7979 email: [email protected] web: www.warmpresswerk.deCertificate #: MD00/1655/0007/3 Expiry date: 29/08/2019

Hauptstraße 29D-54570 Niederstadtfeld

0.10carbon HamburgForgingsWILHELM MAASS GmbH. MAASS GLOBAL GROUPWILHELM MAASS GmbH. MAASS GLOBAL GROUPWILHELM MAASS GmbH. MAASS GLOBAL GROUPWILHELM MAASS GmbH. MAASS GLOBAL GROUP0.10austenitic stainless

Tel: +49 (0)201 29493-338 Fax: +49 (0)201 291875 Email: [email protected]: www.wmaassglobal.comCertificate #: MD00/0966/0007/3 Expiry date: 03/04/2019

Zeche Ernestine 18D-45141 Essen

3.00carbon HamburgForgingsWildauer Schmiede - und Kurbelwellentechnik GmbHWildauer Schmiede - und Kurbelwellentechnik GmbHWildauer Schmiede - und Kurbelwellentechnik GmbHWildauer Schmiede - und Kurbelwellentechnik GmbH3.00carbon-manganese3.00alloy0.20austenitic stainless

Tel: +49 3375 586 305 Fax: +49 3375 586 310 Email: [email protected] http://www.wildauer-skt.deIncluding crankshafts with K factor > 1.0 for approved applicationsCertificate #: MD00/1329/0009/3 Expiry date: 15/11/2018

SchmiedestraßeD-15745 Wildau

As at 22 December 2017 30Page

Page 31: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

HungaryHungaryHungaryHungary

5.00carbon ViennaForgingsHÁMOR Zrt.HÁMOR Zrt.HÁMOR Zrt.HÁMOR Zrt.5.00carbon-manganese5.00alloy

Tel: +36 46 401 520 Fax: +36 46 531 391 Email: mailto:[email protected] Web: http://www.hamorforge.comCertificate No. MD00/3285/0004/3 Expiry date: 25/11/2018

Kiss Ernö út17H-3531

Miskolc

IndiaIndiaIndiaIndia

8.00carbon ChennaiForgingsARCVAC FORGECAST LTDARCVAC FORGECAST LTDARCVAC FORGECAST LTDARCVAC FORGECAST LTD8.00carbon-manganese8.00alloy

Tel: + 91 33 2600 2176; Fax + 91 33 2659 8002Email: [email protected]: www.arcvacsteel.comCertificate No. MD00/3561/0004/3 Expiry date: 06/02/2018Approved for semi finished forged bars

P.O: PanchgharaHooghly.West Bengal - 712 306

NH 2, Durgapur Expressway

6.50carbon MumbaiForgingsBHARAT FORGE LIMITEDBHARAT FORGE LIMITEDBHARAT FORGE LIMITEDBHARAT FORGE LIMITED6.50carbon-manganese6.50alloy

Controlled cooling of alloy steels up to 162 mm diameter permitted for approved applications only.Tel: +91 20 26702525 Fax: +91 20 26870693 Email: [email protected] Certificate No. MD00/0185/0009/3 Expiry date: 04/10/2020Web: http://www.bharatforge.com

Pune 411 036Mundhwa

1.06carbon MumbaiForgingsBHARAT FORGE LIMITEDBHARAT FORGE LIMITEDBHARAT FORGE LIMITEDBHARAT FORGE LIMITED1.06carbon-manganese1.06alloy

Tel no. 0091 211 2239967 Fax No 0091 2026822163

Email: [email protected]

Web www.bharatforge.com

Approved for closed die crankshaft forgings with an enhanced k factor of 1.05 with a maximum main journal diameter of 244 mm.Approved for normalised, quench & tempered, & surface hardened supply conditions

Cert No.MD00/3682/0003/3 Expiry date: 12/10/2018

E-1/1 MIDCBaramati - Maharastra

Baramati

1.00austenitic stainless MumbaiForgingsCHANDAN STEEL LIMITEDCHANDAN STEEL LIMITEDCHANDAN STEEL LIMITEDCHANDAN STEEL LIMITED

Admin Office: Tel: +91 22 66290600, Fax: +91 22 66290633/34 Email to: [email protected]: Tel: +91 260 3089999, Fax: +91 260 2562287/2560103 Email to: [email protected]: www.chandansteel.netCertificate No. MD00/4360/0001/3 Expiry date: 08/07/2017

Survey No. 102/2 Village DehriUmbergaon, ValsadGujarat - 396 171

Forging Division

3.00carbon MumbaiForgingsECHJAY INDUSTRIES PVT. LTD.ECHJAY INDUSTRIES PVT. LTD.ECHJAY INDUSTRIES PVT. LTD.ECHJAY INDUSTRIES PVT. LTD.3.00carbon-manganese3.00alloy3.00austenitic stainless

Tel: +91 281 2387482 Fax: +91 281 2387847email [email protected] web: www.echjayindustries.comApproval includes crankshafts with a K factor of 1.05Certificate No. MD00/3007/0005/3 Expiry date: 18/09/2018

Rajkot 360 003Gujarat

Lalpari Lake Road

As at 22 December 2017 31Page

Page 32: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

4.10carbon MumbaiForgingsKUNJI FORGINGS (P) LTDKUNJI FORGINGS (P) LTDKUNJI FORGINGS (P) LTDKUNJI FORGINGS (P) LTD4.10carbon-manganese4.10alloy2.00austenitic stainless

Tel No: +91-120-4292692, Fax: +91-120-4292699. E-mail: [email protected] No: MD00/4378/0001/3 Expiry 14/06/2017

C-177, B.S Road, Industrial AreaGhaziabad - 201001 (U.P)

Ghaziabad

0.14carbon ChennaiForgingsSHARDLOW INDIA LTDSHARDLOW INDIA LTDSHARDLOW INDIA LTDSHARDLOW INDIA LTD0.14carbon-manganese0.14alloy

Tel: 044-25375807 Fax: 00914425375284Email: [email protected] Website: www.shardlow.inCertificate Number: MD00/4602/0001/3 Expiry Date: 24/01/2018

SembianChennai 600 011

Huzur Gardens

4.00carbon MumbaiForgingsSUNIL FORGING & STEEL INDUSTRIES - UNIT 2SUNIL FORGING & STEEL INDUSTRIES - UNIT 2SUNIL FORGING & STEEL INDUSTRIES - UNIT 2SUNIL FORGING & STEEL INDUSTRIES - UNIT 24.00alloy

Tel: +91 2232676007 Fax: +91 2227401641Email mailto: [email protected]: http://www.sunilforgings.comCertificate No. MD00/4654/0001/3 Expiry date: 21/01/2020

L-141 & L-142, M.I.D.C. Taloja, Tal. Panvel,Dist. Raigad, Navi Mumbai 410208,Maharashtra

8.00carbon ChennaiForgingsVIKRANT FORGE PVT. LIMITEDVIKRANT FORGE PVT. LIMITEDVIKRANT FORGE PVT. LIMITEDVIKRANT FORGE PVT. LIMITED8.00carbon-manganese8.00alloy

Phone: +91 33 2659 6006 Fax: +91 33 2659 3738 email [email protected] web www.vikrantforge.comCertificate No. MD00/3055/0005/3 Expiry date: 21/01/2019

PO: Dankuni - 711224West Bengal

Maity Para, NH-2, Delhi Road

1.20austenitic stainless MumbaiForgingsVIRAJ PROFILES LIMITED (FORGING DIVISION)VIRAJ PROFILES LIMITED (FORGING DIVISION)VIRAJ PROFILES LIMITED (FORGING DIVISION)VIRAJ PROFILES LIMITED (FORGING DIVISION)

Tel: +91 90444 1039 Fax: +91 2525 260159email [email protected] web: www.viraj.com

Certificate Number: MD00/3214/0004/3 Expiry date: 07/12/2017

BOISAR,DIST-PALGHAR,MAHARASHTRA - 401506

G-2,23,75, MIDC & SURVEY No-140/1, SARAVALI,TARAPUR INDUSTRIAL AREA

ItalyItalyItalyItaly

0.13carbon GenoaForgings VARESINA STAMPI S.p.A VARESINA STAMPI S.p.A VARESINA STAMPI S.p.A VARESINA STAMPI S.p.A0.13carbon-manganese0.13alloy

Tel: +39 011 9282240

E-mail: [email protected]

Website:www.varesina.com

Certificate No: MD00/4733/0001/3 Expiry Date: 28/06/2020

1-10070 Corio Canavse (TO)Regionionia Tenqua,

0.20carbon MilanForgingsA.C.S.A. STEEL FORGINGS S.P.A.A.C.S.A. STEEL FORGINGS S.P.A.A.C.S.A. STEEL FORGINGS S.P.A.A.C.S.A. STEEL FORGINGS S.P.A.0.20carbon-manganese0.20alloy

Tel: +39 331 712 011 Fax: +39 331 712055 email: [email protected] web: www.asca.itCertificate No. MD00/0071/0007/3 Expiry date: 24/08/2019

21040 Oggiona S.StefanoVarese

Via Per Solbiate Arno 43

As at 22 December 2017 32Page

Page 33: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

5.50carbon VeniceForgingsACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.5.50carbon-manganese5.50alloy5.50austenitic stainless5.50duplex stainless5.50precipitation hardened

stainless*

Tel: +39 0444 968211 Fax: +39 0444 968182 Email:mailto:[email protected] Web:http://www.acciaierie-valbruna.comCertificate No. MD00/0041/0009/3 Expiry date: 01/06/2020

36100 VicenzaViale Della Scienza, 25 z.i.

10.00carbon VeniceForgingsASFO S.P.A.ASFO S.P.A.ASFO S.P.A.ASFO S.P.A.10.00carbon-manganese10.00alloy4.00austenitic stainless4.00duplex stainless4.00martensitic stainless*

Tel. +39 0445 805290 Fax. +39 0445 805299 email: [email protected] web: www.fomasgroup.comCertificate No. MD00/2823/0007/3 Expiry date: 15/09/2019

36010 Chiuppano (VI)via IV Novembre, 12

18.00carbon VeniceForgingsASFO S.P.A.ASFO S.P.A.ASFO S.P.A.ASFO S.P.A.18.00carbon-manganese18.00alloy

Tel: +39 (0) 445 805290 Fax: +39 (0) 445 805299email: [email protected] web: www.fomasgroup.comCertificate Number: MD00/4064/0003/3 Expiry: 16/09/2019

Via Stradone del Dieci45030 Villamarzana (RO)

28.00carbon MilanForgingsASO SIDERURGICA S.p.A. UNIPERSONALEASO SIDERURGICA S.p.A. UNIPERSONALEASO SIDERURGICA S.p.A. UNIPERSONALEASO SIDERURGICA S.p.A. UNIPERSONALE28.00carbon-manganese28.00alloy31.00austenitic stainless

Tel No +39 30 6841011 Fax No: +39 30 6841012Email: [email protected]: www.aso..itCertificate No: MD00/3967/0003/3 Expiry date 01/12/2017

Via Verginello, n 29~3125045 CastegnatoBrescia

ASO Forge

0.03carbon MilanForgingsB.F.E. s.r.lB.F.E. s.r.lB.F.E. s.r.lB.F.E. s.r.l0.03carbon-manganese0.03alloy0.03austenitic stainless0.03duplex stainless*

Tel. +39 035 584290 Fax. +39 035 583022email: [email protected] web: bfe.itCertificate No. MD00/4163/0002/3 Expiry date: 14/05/2019

Via G. Segantini,16-23842Bosisio Parini (LC)

0.16carbon MilanForgingsBERTOT S.p.A.BERTOT S.p.A.BERTOT S.p.A.BERTOT S.p.A.0.16carbon-manganese0.16alloy0.16austenitic stainless0.16duplex stainless

Tel: +39 (0)11 9214935 Fax: +39 (0)11 9210618 email [email protected] web: www.bertot.comCertificate No. MD00/4188/0002/3 Expiry date: 24/06/2019

Via Robaronzino 41/4310073 CIRIE'(TO)

0.18carbon VeniceForgingsBIFRANGI S.p.A.BIFRANGI S.p.A.BIFRANGI S.p.A.BIFRANGI S.p.A.0.18carbon-manganese0.18alloy

Tel: +39 (0)424 8381 Fax: +39 (0)424 838211 Email:[email protected] Web:http://www.bifrangi.itCertificate No. MD00/2946/0005/3 Expiry date: 23/01/2018

36065 MussolenteVicenza

Via Manzoni, 14

As at 22 December 2017 33Page

Page 34: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.20carbon MilanForgingsCANAVERA & AUDI SpACANAVERA & AUDI SpACANAVERA & AUDI SpACANAVERA & AUDI SpA0.20carbon-manganese0.20alloy

Tel: +39 (0)11 92 86 28, Fax: +39 (0)11 92 82 709,

Email: [email protected]

Website: www.canavera.com

Certificate Number:. MD00/3048/0006/3 Expiry: 01/02/2019

Regione Malone 610070 Corio (TO)

CORIO PLANT

0.20carbon MilanForgingsCANAVERA & AUDI SpACANAVERA & AUDI SpACANAVERA & AUDI SpACANAVERA & AUDI SpA0.20carbon-manganese0.20alloy

Tel: +39 (0) 1244 8733 Fax: +389 (0) 1244 8784

E-mail: [email protected]

Website: www.canavera.com

Certificate Number: MD00/4147/0003/3 Expiry: 02/02/2019

Via Forno, 110080 Rivara (To)

RIVARA PLANT

10.00carbon VeniceForgingsCMF S.P.A.CMF S.P.A.CMF S.P.A.CMF S.P.A.10.00carbon-manganese10.00alloy

Tel: +39 0481 630589 Fax: +39 0481 630511 email: [email protected] web : www.cmf-forgiati.itCertificate No. MD00/2290/0007/3 Expiry date: 01/09/2019

via G. Galilei, 2534071 Cormons (GO)

0.01carbon MilanForgingsCUGINI FRIGERIO S.R.L.CUGINI FRIGERIO S.R.L.CUGINI FRIGERIO S.R.L.CUGINI FRIGERIO S.R.L.0.01carbon-manganese0.01alloy

Tel: +39 (0)31 643 325 Fax: +39 (0)31 644 286 Email: mailto:[email protected] Web: http://www.cuginifrigerio.comCertificate Number: MD00/0357/0007/3 Expiry: 30/10/2018

Via S. Francesco d'Assisi, 322036 ERBA CO

9.00carbon TriesteForgingsF.A.C.S. FUCINE S.R.L.F.A.C.S. FUCINE S.R.L.F.A.C.S. FUCINE S.R.L.F.A.C.S. FUCINE S.R.L.9.00carbon-manganese9.00alloy9.00austenitic stainless

Tel: +39 0432 656510 Fax: +39 0432 675784 Email: [email protected] No. MD00/0471/0008/3 Expiry date: 05/12/2019

Viale del Lavoro, 10033050 Pavia di Udine (Udine)

Forgiatura Acciai Speciali

36.00carbon VeniceForgingsF.O.C. CISCATO S.p.A.F.O.C. CISCATO S.p.A.F.O.C. CISCATO S.p.A.F.O.C. CISCATO S.p.A.36.00carbon-manganese36.00alloy25.00austenitic stainless

Tel: +39 0445 739111 Fax: +39 0445 739222 Email: mailto:[email protected] Web: http://www.foc.itCertificate No. MD00/2032/0009/3 Expiry date: 03/12/2018

Via Pasin, 136010 Velo d'Astico fraz.Seghe(Vicenza)

0.10carbon MilanForgingsFEAT GROUP SpA Divisione FEAT INDUSTRIALEFEAT GROUP SpA Divisione FEAT INDUSTRIALEFEAT GROUP SpA Divisione FEAT INDUSTRIALEFEAT GROUP SpA Divisione FEAT INDUSTRIALE0.10carbon-manganese0.10alloy0.10austenitic stainless0.07duplex stainless*

Tel: +39 031 6591 Fax: +39 031 659219 Email: [email protected] Web: http://www.featgroup.comCertificate No. MD00/0485/0008/3 Expiry date: 26/09/2017

Via G. Parini 3023861 Cesana Brianza (LC)

As at 22 December 2017 34Page

Page 35: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

25.00carbon MilanForgingsFOMAS S.p.A.FOMAS S.p.A.FOMAS S.p.A.FOMAS S.p.A.25.00carbon-manganese25.00alloy25.00austenitic stainless37.50duplex stainless*

Tel: +39 (0) 39 99811 Fax: +39 (0) 39 58487 Email: [email protected] Web: http://www.fomas.itCertificate No. MD00/0475/0008/3 Expiry date: 07/01/2019

Via Martiri della Liberazione, 1723875 Osnago (LC)

25.00carbon GenoaForgingsFOMEC SpAFOMEC SpAFOMEC SpAFOMEC SpA25.00carbon-manganese

Tel No +39 0174 45394 fax No +39 0174 481009Email: [email protected] www.fomec.itCertificate No MD00/4012/0002/3 Expiry date 11/04/2018

Corso Inghilterra,40Zona Industriale,12084 Mondovi' (CN)

30.00carbon MilanForgingsFORGE MONCHIERI S.p.A.FORGE MONCHIERI S.p.A.FORGE MONCHIERI S.p.A.FORGE MONCHIERI S.p.A.30.00carbon-manganese30.00alloy30.00austenitic stainless

Tel: +39 0364 236111 Fax: +39 0364 340902 Email: [email protected] Web: http://www.monchieri.itCertificate No. MD00/0522/0007/3 Expiry date: 24/12/2018

25040 Cividate CamunoBrescia

Via Industriale No. 3

0.50duplex stainless* MilanForgingsFORGE NICROMO S.p.AFORGE NICROMO S.p.AFORGE NICROMO S.p.AFORGE NICROMO S.p.A

Tel: +39 (0) 341 979831 Fax: +39 (0) 341 982228 Email: [email protected] Certificate Number. MD00/4271/0003/3 Expiry date:22/12/2019

Via Provinciale 5723813 Bindo di Cortenova (LC)

42.00carbon VeniceForgingsFORGES S.P.A.FORGES S.P.A.FORGES S.P.A.FORGES S.P.A.42.00carbon-manganese42.00alloy

Tel: + 39 (0)432 701433 Fax: +39 (0)432 734299email: [email protected] web http://www.forgesitaly.itCertificate No. MD00/2717/0006/3 Expiry date: 18/07/2018

Via dell' Artigianato 5733043 Cividale del Friuli (UD)

30.00carbon-manganese BresciaForgingsFORGIA DI BOLLATE S.P.A.FORGIA DI BOLLATE S.P.A.FORGIA DI BOLLATE S.P.A.FORGIA DI BOLLATE S.P.A.30.00alloy12.40austenitic stainless12.40duplex stainless*

Tel.:+390376714511 Fax.:+390376723846Email: [email protected]//: www.forgiadibollate.comCertificate no.: MD00/4226/0002/3, Expiry date: 15/09/2019

Strada Provinciale 4, No 946013 Canneto Sull'Oglio (Mn)

Canneto Sull'Oglio (Mn)

0.67alloy RavennaForgingsFORGIA RAPIDA S.r.lFORGIA RAPIDA S.r.lFORGIA RAPIDA S.r.lFORGIA RAPIDA S.r.l

Tel No +39 51 328484 Fax No +39 51 328312email: [email protected] web: www.forgiarapida.com

Certificate No. MD00/4077/0002/3 Expiry Date 09/09/2018

Via Brini,nr 3240128 Bologna

9.00carbon MilanForgingsFORGIA REZZATESE SRL UNIPERSONALEFORGIA REZZATESE SRL UNIPERSONALEFORGIA REZZATESE SRL UNIPERSONALEFORGIA REZZATESE SRL UNIPERSONALE9.00carbon-manganese9.00alloy9.00martensitic stainless*

Tel No +30 9964722 Fax No +30 9964762email: [email protected] web: www.forgiaressatese.itCertificate No. MD00/4562/0001/3 Expiry Date 30/03/2019

Via Gavardina 2025011 CalcinatoBrescia

As at 22 December 2017 35Page

Page 36: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

60.00carbon MilanForgingsFORGIATURA A. VIENNA S.r.l.FORGIATURA A. VIENNA S.r.l.FORGIATURA A. VIENNA S.r.l.FORGIATURA A. VIENNA S.r.l.60.00alloy60.00austenitic stainless60.00duplex stainless

Tel: +39 2 9393 0011 email: [email protected] web: www.forgevienna.it

Certificate No. MD00/0535/0007/3 Expiry date: 09/02/2020

Via Ospiate 46/4820017 RHO Milan

8.00carbon MilanForgingsFORGIATURA MARCORA S.r.l.FORGIATURA MARCORA S.r.l.FORGIATURA MARCORA S.r.l.FORGIATURA MARCORA S.r.l.8.00carbon-manganese8.00alloy8.00austenitic stainless

Tel: +39 331 375540email: [email protected] web: www.forgiaturamarcora.it

Certificate No. MD00/0536/0008/3 Expiry date: 31/05/2020

Via Gramsci, 3621057 Olgiate Olona (VA)

Olgiate Olona

60.00carbon MilanForgingsFORGIATURA MODERNA ARESE S.p.A.FORGIATURA MODERNA ARESE S.p.A.FORGIATURA MODERNA ARESE S.p.A.FORGIATURA MODERNA ARESE S.p.A.50.00carbon-manganese50.00alloy

Tel: +39 02 93 45 1938email: [email protected] web: www.fmaspa.itCertificate No. MD00/0533/0007/3 Expiry date: 28/11/2019

Via delle Industrie, 1720020 Arese (MI)

85.00carbon MilanForgingsFORGIATURA MORANDINI S.R.LFORGIATURA MORANDINI S.R.LFORGIATURA MORANDINI S.R.LFORGIATURA MORANDINI S.R.L85.00carbon-manganese53.00alloy15.00austenitic stainless

Tel: +39 0364 347132 Fax: +39 0364 347156

E-Mail: [email protected] Web: http://www.morandini.it

Certificate No. MD00/0534/0010/3 Expiry date: 14/05/2020

25040 CividateCamuno - Brescia (BS)

Via dell'Industria, 5

0.84carbon VeniceForgingsFORGIATURA SAN GIORGIO S.p.A.FORGIATURA SAN GIORGIO S.p.A.FORGIATURA SAN GIORGIO S.p.A.FORGIATURA SAN GIORGIO S.p.A.0.84carbon-manganese0.84alloy

Tel No: 0039 0331 413311 Fax No: 0039 0331413333email: [email protected] web www.forgiaturasg.it Certificate No: MD00/3707/0003/3 Expiry date: 20/11/2018

20010 Canegrate,Milan

Via Alessandria 9/11

25.00carbon VeniceForgingsFORGITAL ITALY S.p.A.FORGITAL ITALY S.p.A.FORGITAL ITALY S.p.A.FORGITAL ITALY S.p.A.25.00carbon-manganese25.00alloy25.00austenitic stainless

Tel: +39 (0) 445 731313 Fax: +39 (0) 445 731490 Email: mailto:[email protected] Web page http://www.forgital.comCertificate Number: MD00/0538/0007/3 Expiry: 16/02/2018

Via G. Spezzapria, 136010 Velo d'Astico loc. Seghe (Vicenza)Vicenza

80.00carbon MilanForgingsFRANCHINI ACCIAI S.p.A.FRANCHINI ACCIAI S.p.A.FRANCHINI ACCIAI S.p.A.FRANCHINI ACCIAI S.p.A.80.00carbon-manganese50.00alloy

Tel: +39 30 9750211 Fax: +39 30 9975231 Email: mailto:[email protected] Web: http://www.franchiniacciai.comCertificate No. MD00/0548/0010/3 Expiry date: 21/11/2020

25030 MairanoBrescia

Via IV Novembre 9/17

10.00carbon TriesteForgingsFRIULFORGIA S.R.LFRIULFORGIA S.R.LFRIULFORGIA S.R.LFRIULFORGIA S.R.L10.00carbon-manganese10.00alloy

As at 22 December 2017 36Page

Page 37: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +39 0346 6109111 Fax: +39 0432 918630

E-mail: [email protected]

Website: www.friuforgia.it

Certificate No. MD00/3893/0003/3 Expiry date: 14/03/2020

Localita Pannellia No. 5533039 Sedegliano (Udine)

35.38alloy MilanForgingsGASPARINI s.r.l.GASPARINI s.r.l.GASPARINI s.r.l.GASPARINI s.r.l.

Tel No: +39 1316 17430Email: [email protected]: www.gasparinisrl.euCertificate no: MD00/4316/0002/3 Expiry date 12/05/2020

Via Rana snc - Zona D615122 Spinetta Marengo - Alessandria

0.08alloy TriesteForgingsHOT ROLL S.r.l.HOT ROLL S.r.l.HOT ROLL S.r.l.HOT ROLL S.r.l.

Tel: +39 0124 477511 Fax: +39 0124 477505 Email: [email protected] Web: http://www.fomasgroup.comCertificate No. MD00/4133/0002/3 Expiry date: 23/03/2019

Via Rolando Perino No. 49Busano 10080 (To)

FOMAS GROUPSmall Rings Products

5.00carbon MilanForgingsIRE-OMBA S.p.A.IRE-OMBA S.p.A.IRE-OMBA S.p.A.IRE-OMBA S.p.A.5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +39 35 4160811 email: [email protected] www.ire-omba.itCertificate No. MD00/2340/0006/3 Expiry date: 28/05/2017

Via Serassi, 1424125 Bergamo

0.05carbon MilanForgingsISEF SrlISEF SrlISEF SrlISEF Srl0.05carbon-manganese0.05alloy0.05austenitic stainless0.05duplex stainless

Tel: +39 0331 994033 Fax: +39 0331 991761 Email mailto:[email protected] Web http://www.isefsteelforgings.comCertificate No. MD00/2172/0007/3 Expiry date: 27/12/2018

Via Matteotti 70/7621040 CarnagoVarese

30.00carbon MilanForgingsLUCCHINI MAMÈ FORGE S.p.A.LUCCHINI MAMÈ FORGE S.p.A.LUCCHINI MAMÈ FORGE S.p.A.LUCCHINI MAMÈ FORGE S.p.A.30.00carbon-manganese30.00alloy15.00austenitic stainless

Tel: +39 (0) 364 347755 Fax: +39 (0) 364 347791 E-mail: [email protected]

Website: www.lucchinimame.com

Certificate No. MD00/0532/0009/3 Expiry date: 20/09/2020

Via Delle Cave, 125040 Cividate Camuno (Brescia)

40.00carbon MilanForgingsLUCCHINI RS S.p.A.LUCCHINI RS S.p.A.LUCCHINI RS S.p.A.LUCCHINI RS S.p.A.40.00carbon-manganese40.00alloy40.00austenitic stainless

Tel: +39 035 963520 Fax: +39 035 963488 Email: mailto: [email protected] Web: http://www.lucchiniRS.itIncluding steelmaking by the EAF and ingot route.Certificate No. MD00/0949/0007/3 Expiry: 18/03/2018

Via G. Paglia N.4524065 LovereBergamo

0.10carbon TriesteForgingsMEGA S.P.A.MEGA S.P.A.MEGA S.P.A.MEGA S.P.A.0.10carbon-manganese0.10alloy0.10austenitic stainless0.10duplex stainless*

el: +39 035 661280 Fax: +39 035 665535 Email: [email protected] Web: http://www.mega-fittings.comCertificate No. MD00/4121/0003/3 Expiry date: 28/06/2019

Via Dalla Chiesa 324020 Scanzorosciate

As at 22 December 2017 37Page

Page 38: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

30.00carbon MilanForgingsMETALCAM S.P.AMETALCAM S.P.AMETALCAM S.P.AMETALCAM S.P.A30.00carbon-manganese30.00alloy30.00austenitic stainless

Tel: +39 0364 238261 Fax: +39 0364 238216 Email: mailto:[email protected] No. MD00/2111/0007/3 Expiry date: 02/01/2020

Via Leonardo da Vinci 325043 Breno (BS)

Breno Works

0.07carbon MilanForgingsMETALFAR PRODOTTI INDUSTRIALI S.p.AMETALFAR PRODOTTI INDUSTRIALI S.p.AMETALFAR PRODOTTI INDUSTRIALI S.p.AMETALFAR PRODOTTI INDUSTRIALI S.p.A0.07carbon-manganese0.07alloy0.07austenitic stainless

Tel: +39 3351451866 E-mail: [email protected]

Website: www.metalfar.com

Certificate No. MD00/2937/0006/3 Expiry date: 04/06/2020

23861 Cesana Brianza (Lecco)Via G. Parini, 28

47.00carbon MilanForgingsOFAR S.p.A.OFAR S.p.A.OFAR S.p.A.OFAR S.p.A.47.00carbon-manganese47.00alloy

Tel: +39 30 952 2511 Fax: +39 30 992 9952 Email: mailto:[email protected] Certificate Number: MD00/1128/0007/3 Expiry: 23/04/2016

25010 VisanoBrescia

Via dell'Industria. 5

0.05carbon MilanForgingsOFFICINA MECCANICA FRATELLI RISETTI S.r.lOFFICINA MECCANICA FRATELLI RISETTI S.r.lOFFICINA MECCANICA FRATELLI RISETTI S.r.lOFFICINA MECCANICA FRATELLI RISETTI S.r.l0.05carbon-manganese0.05austenitic stainless

Tel No: +39 331 993440 +39 331993356Email: risettim'libero.itCertificate No: MD00/4280/0002/3 Expiry date: 14/01/2020

Via Trieste,421048, Solbiate Arno (VA)

1.20carbon MilanForgingsOFFICINE AMBROGIO MELESI & CO.OFFICINE AMBROGIO MELESI & CO.OFFICINE AMBROGIO MELESI & CO.OFFICINE AMBROGIO MELESI & CO.1.20carbon-manganese1.20alloy1.20austenitic stainless1.20duplex stainless*

Tel: +39 0341 901521 Fax: +39 0341 983497 Email:mailto:[email protected] No. MD00/1134/0009/3 Expiry date: 29/06/2019

Largo de' Vecchi, 1123813 Cortenova (LC)

0.32carbon MilanForgingsOFFICINE BINDA & GALPERTI S.r.l.OFFICINE BINDA & GALPERTI S.r.l.OFFICINE BINDA & GALPERTI S.r.l.OFFICINE BINDA & GALPERTI S.r.l.0.32carbon-manganese0.32austenitic stainless0.32duplex stainless*

Tel no:+ 39 341 901333 Fax No: +39 341 901300Email [email protected] www.officinebindaegalperti.comCertificate No MD00/4225/0004/3 Expiry date 04/09/2019

Via Roma 43

1.00carbon MilanForgingsRIGANTI S.p.A.RIGANTI S.p.A.RIGANTI S.p.A.RIGANTI S.p.A.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel: +39 331 988600 Fax: +39 331 988699 Email: mailto:[email protected] Web: http://www.riganti.comScope of approval includes for solid forged crankshafts in alloy grade to a maximum weight of 140kgs.Heat treatment is subcontractedCertificate No. MD00/0771/0010/3 Expiry date: 28/08/2020

21048 SOLBIATE ARNO (VA)Via Vittorio Veneto 1

25.00carbon MilanForgingsRINGMILL S.p.A.RINGMILL S.p.A.RINGMILL S.p.A.RINGMILL S.p.A.25.00carbon-manganese25.00alloy25.00austenitic stainless25.00martensitic stainless*

As at 22 December 2017 38Page

Page 39: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +39 (0)342 688111 fax: +39 (0)342 687746 Email: mailto:[email protected]* accepted for approved applicationsCertificate No. MD00/2162/0007/3 Expiry date: 12/10/2018

Via Adda. 2323015 Nuova Olonio (Sondrio)

1.70carbon VeniceForgingsRTD SRLRTD SRLRTD SRLRTD SRL1.70carbon-manganese0.70austenitic stainless

+39 0445 741420 Fax: +39 0445 712368email: [email protected] web: www.rtdforge.comCertificate No: MD00/4582/0001/3 Expirt Date: 22/05/2019

via Dei Roveri 34,36011 Arsiero (VI)

6.00carbon TriesteForgingsSESIA FUCINE S.r.l.SESIA FUCINE S.r.l.SESIA FUCINE S.r.l.SESIA FUCINE S.r.l.6.00carbon-manganese6.00alloy

Tel: +39 011 2424165 Fax: +39 011 2465746Email: [email protected]: www.sesiafucine.comCertificate No. MD00/3744/0004/3 Expiry date: 16/02/2019

Strada Basse di Stura 6110154 Torino

10.00carbon VeniceForgingsSIDERFORGEROSSI GROUP S.P.A.SIDERFORGEROSSI GROUP S.P.A.SIDERFORGEROSSI GROUP S.P.A.SIDERFORGEROSSI GROUP S.P.A.10.00carbon-manganese10.00alloy1.50austenitic stainless

Tel: +39 0445 714400 Fax: +39 0445 714444Email mailto:[email protected] Web: http://www.forgerossi.comCertificate Number. MD00/3154/0006/3 Expiry date: 09/04/2020

Via Cartiera di Mezzo, 3836011 Arsiero (VI)

Works of Arsiero

4.00carbon VeniceForgingsSIDERFORGEROSSI GROUP SPASIDERFORGEROSSI GROUP SPASIDERFORGEROSSI GROUP SPASIDERFORGEROSSI GROUP SPA4.00carbon-manganese4.00alloy

Tel: +39 0445 802222 Fax: +39 0445 802202 E-mail; mailto:[email protected] Web: http://www.siderforge.itCertificate No. MD00/2159/0008/3 Expiry date: 09/11/2018

Via M. Schiro, 236010 Cogollo del CengioVicenza

Cogollo del Cengio

0.50carbon MilanForgingsSIDERFORGEROSSI GROUP SPASIDERFORGEROSSI GROUP SPASIDERFORGEROSSI GROUP SPASIDERFORGEROSSI GROUP SPA0.50carbon-manganese0.50alloy

Tel: +39 0124 477333 Fax: +39 0124 477303 Email mailto: [email protected] Web http;//www.siderforgerossi.comCertificate No. MD00/3551/0005/3 Expiry date: 08/05/2020

Via Rolando Perino, 3710080 Busano Canavese

Busano Canavese

25.00carbon MilanForgingsSPECIAL FLANGES S.P.ASPECIAL FLANGES S.P.ASPECIAL FLANGES S.P.ASPECIAL FLANGES S.P.A25.00carbon-manganese25.00alloy25.00austenitic stainless

Tel: +39 0362.552247 Fax: +39 0362.501653email: [email protected] web: www.special-flanges.it

Certificate No.: MD00/4335/0002/3 Expiry Date: 09/06/2020

Via Liguria 115,20025 Legnano (MI),Milan,

0.02carbon MilanForgingsSTAMPERIA CASOLI Srl.STAMPERIA CASOLI Srl.STAMPERIA CASOLI Srl.STAMPERIA CASOLI Srl.0.02carbon-manganese0.02alloy0.02austenitic stainless

Tel: +39 0331 994 254 Fax: +39 0331 991 611 Email:[email protected] :www.stamperiacasoli.itCertificate Number: MD00//2718/0006/3 Expiry: 02/07/2018

Via Colzani 4021048 Solbiate Arno VA

As at 22 December 2017 39Page

Page 40: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.01carbon MilanForgingsSTAMPERIA DI MENZAGO S.R.L.STAMPERIA DI MENZAGO S.R.L.STAMPERIA DI MENZAGO S.R.L.STAMPERIA DI MENZAGO S.R.L.0.01carbon-manganese0.01alloy

Tel No: +39 331909196 Fax No: + 39 331 908511Email [email protected]: www.stamperiadimenzago.itCertificate No: MD00/4251/0002/3 Expiry date 22/10/2019

Via Della Concordia, 3921040 Menzago di Sumirago(VA)

0.02carbon MilanForgingsSTAMPERIA ITALFORGE DI SIRONE Srl.STAMPERIA ITALFORGE DI SIRONE Srl.STAMPERIA ITALFORGE DI SIRONE Srl.STAMPERIA ITALFORGE DI SIRONE Srl.0.02carbon-manganese0.02alloy0.02austenitic stainless0.02duplex stainless

Tel: +39 031 850016 Fax: +39 031 852572email: [email protected] web: www.stamperiaitalforge.it

Certificate No: MD00/4532/0001/3 Expiry date: 06/12/2018

Via dell'Industria, 823844 Sirone (LC)

4.00alloy MilanForgingsTENARIS DALMINETENARIS DALMINETENARIS DALMINETENARIS DALMINE

Tel: +39 (0)35 5602098 Mob: +39 3290504376email: [email protected] web: www.tenaris.comApproved for quench and tempered seamless pressure vessels by pipe spinning process to AD-2000 Merkblatt W0Maximum approved dimensions = 711mm o/d x 40mm w/tCertificate No. MD00/4363/0002/3 Expiry date: 19/07/2020

24044 Dalmine (Bergamo)Piazza Caduti 6 Luglio 1944

6.00carbon MilanForgingsVALFORGE s.r.l.VALFORGE s.r.l.VALFORGE s.r.l.VALFORGE s.r.l.6.00carbon-manganese6.00alloy6.00austenitic stainless

Tel: +39 341 90 15 79 Fax: +39 391 983864 Email: [email protected] Website: http://www.valforge.it

Certificate No. MD00/4196/0002/3 Expiry date: 03/07/2019

Via Provinciale 41/43Cortenova (LC)

0.05carbon GenoaForgingsVARESINA STAMPI S.p.AVARESINA STAMPI S.p.AVARESINA STAMPI S.p.AVARESINA STAMPI S.p.A0.05carbon-manganese0.05alloy

Tel: +39 0331 909010 Fax: +39 0331 908681Email: [email protected]

Website: www.pozzi-group.it/it/home

Certificate No: MD00/4518/0001/3 Expiry Date: 18/10/2018

13-21040 Quinzano di Sumirago(VA)

Via G. Pozzi

JapanJapanJapanJapan

4.00carbon KobeForgingsAICHI STEEL CORPORATIONAICHI STEEL CORPORATIONAICHI STEEL CORPORATIONAICHI STEEL CORPORATION4.00carbon-manganese4.00austenitic stainless

Tel: +81 52 603 9353 Fax: +81 52 603 9898 Email: mailto:[email protected] www.aichi-steel.co.jpCertificate No. MD00/0076/0007/3 Expiry date: 23/09/2018

Arao-machiTokai-shiAichi-ken, 476-8666

Chita Plant1, Wano-Wari

3.00carbon YokohamaForgingsANTEX CORPORATIONANTEX CORPORATIONANTEX CORPORATIONANTEX CORPORATION3.00carbon-manganese3.00alloy3.00austenitic stainless

As at 22 December 2017 40Page

Page 41: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +81 (0)293 23 7511 Fax: +81 (0)293 23 7515 E-mail: mailto: [email protected] Web:http://www.antex.co.jpCertificate No. MD00/0110/0009/3 Expiry date: 06/07/2020

3333-24 Kami-TezunaTakahagi CityIbaraki 318-0004

Takahagi Plant

1.00carbon YokohamaForgingsCHIKARA KOGYO Co., Ltd.CHIKARA KOGYO Co., Ltd.CHIKARA KOGYO Co., Ltd.CHIKARA KOGYO Co., Ltd.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel: +81 471 24 7725 Fax: +81 471 24 6671

E-mail: [email protected]

Website: www.chikra-kogyo.co.jp

Certificate No. MD00/0301/0008/3 Expiry date: 09/09/2019

233-4 Nishi-SangaoNoda-shiChiba. 278-0015

30.00carbon YokohamaForgingsDAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.30.00carbon-manganese30.00alloy16.00austenitic stainless

Tel: +81 (0)279 25 2009 Fax: +81 (0)279 25 2043 Email: mailto:[email protected] No. MD00/0375/0008/3 Expiry date: 25/11/2018

Shibukawa-shiGunma 377-0007

Shibukawa Plant500, Ishihara

20.00carbon KobeForgingsDAIMARU STEEL FORGING CO., LTD.DAIMARU STEEL FORGING CO., LTD.DAIMARU STEEL FORGING CO., LTD.DAIMARU STEEL FORGING CO., LTD.20.00carbon-manganese20.00alloy20.00austenitic stainless

Tel: +81 6 581 2851 Fax: +81 6 581 2855 email: [email protected] web: www.daimaru-kozai.co.jpCertificate No. MD00/0380/0007/3 Expiry date: 16/10/2018

28-7 Kujo 1-chomeNishi-kuOsaka

5.00carbon YokohamaForgingsDOWA FORGING CO., LTD.DOWA FORGING CO., LTD.DOWA FORGING CO., LTD.DOWA FORGING CO., LTD.5.00carbon-manganese5.00alloy

Tel: +81 (0)3 3790 2003 Fax: +81 (0)3 3790 2877 email: [email protected] web www.dowa-forging.co.jp

Certificate No. MD00/2875/0006/3 Expiry date: 11/04/2020

Ohta-ku,Tokyo143-0003

2-6-19, Keihinjima

3.25carbon KobeForgingsHAKURO FORGING CO., LTD.HAKURO FORGING CO., LTD.HAKURO FORGING CO., LTD.HAKURO FORGING CO., LTD.3.25carbon-manganese3.25alloy

Tel: +81 794 95 1238 Fax: +81 794 95 1325 email: mailto: [email protected]: www.hakuro-net.co.jpCertificate No. MD00/3162/0005/3 Expiry date: 24/05/2020

Inami-choKako-gunHyogo Pref.

444-22 Shimokusadani

10.00carbon YokohamaForgingsHATAKEYAMA IRON WORKS Co., Ltd.HATAKEYAMA IRON WORKS Co., Ltd.HATAKEYAMA IRON WORKS Co., Ltd.HATAKEYAMA IRON WORKS Co., Ltd.10.00carbon-manganese10.00alloy

Tel: +81 (0)3 3790 0211 Fax: +81 (0)3 3790 0210 Email: [email protected] site www.hatakeyama.ne.jpCertificate No. MD00/0658/0007/3 Expiry date: 22/01/2018

Ohta-kuTokyo143-0003

2-11-1, Keihinjima

As at 22 December 2017 41Page

Page 42: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

12.00alloy KobeForgingsHITACHI METALS, LTD.HITACHI METALS, LTD.HITACHI METALS, LTD.HITACHI METALS, LTD.12.00austenitic stainless

Tel: +81 (0) 854 22 1908 Fax: +81 (0) 854 23 0281 Email mailto:[email protected] Web http://www.hitachi-metals.co.jpCertificate No. MD00/0678/0007/3 Expiry date: 19/12/2018

Yasugi-shiShimane-ken

Yasugi Works2107-2, Yasugi-cho

9.60carbon NagasakiForgingsHOWSER CO. LTD.,HOWSER CO. LTD.,HOWSER CO. LTD.,HOWSER CO. LTD.,9.60carbon-manganese9.60alloy

Tel: +81 949 22 1385 Fax: +81 949 22 1386 email: [email protected] web: www.howser.co.jp

Certificate No. MD00/1365/0006/3 Expiry date: 15/01/2017

6-50 Mizubori 2 - chomeNogata CityFukuoka Pref.

250.00carbon NagasakiForgingsJAPAN CASTING & FORGING CORPORATIONJAPAN CASTING & FORGING CORPORATIONJAPAN CASTING & FORGING CORPORATIONJAPAN CASTING & FORGING CORPORATION250.00carbon-manganese250.00alloy250.00austenitic stainless

Including steelmakingTel: +81 93 884 0044 Fax: +81 93 873 1057 Email: mailto:[email protected] Web: http://www.jcfc.jpCertificate No. MD00/0790/0009/3 Expiry date: 27/04/2019

Materials Quality Scheme Approved - Approval No. MQS026

Tobata-KuKitakyushu City804-8555

46-59, Sakinohama Nakabaru

25.00carbon KobeForgingsKANSAI TEKKO CO., LTD.KANSAI TEKKO CO., LTD.KANSAI TEKKO CO., LTD.KANSAI TEKKO CO., LTD.25.00carbon-manganese25.00alloy

Tel: +81 6 6487 0133 Fax: +81 6 6487 0137 email: [email protected] web: www.kansaitekko.co.jp

Certificate No. MD00/0824/0008/3 Expiry date: 24/10/2020

56 Kitahatsushima-choAmagasaki-cityHyogo-ken

400.00carbon KobeForgingsKOBE STEEL, LTD.KOBE STEEL, LTD.KOBE STEEL, LTD.KOBE STEEL, LTD.400.00carbon-manganese400.00alloy400.00austenitic stainless

Tel: +81 794 45 7178 Fax: +81 794 45 7235

Email: [email protected]

Web http://www.kobelco.co.jp

Including steelmaking

40CrMo8 high strength low alloy steel with tensile strength above 950MPa accepted for approved applications

Solid built crankshafts with a K factor > 1.0 for approved applications.Die Forged Semi built up crank throws up to 90T types S42MC-C and S50MC-C

MQS Approved - Approval No. MQS 053

Certificate No. MD00/0867/0010/3 Expiry date: 27/10/2018

Arai-choTakasago-shi

Steel Casting and Forging Plant3-1, 2 Chome Shinhama

0.06carbon NagasakiForgingsMETALFORGE CORPORATIONMETALFORGE CORPORATIONMETALFORGE CORPORATIONMETALFORGE CORPORATION0.06carbon-manganese0.06alloy

Tel: +81 982 63 7001 Fax: +81 982 63 7005email: [email protected] web: www.metalforge.co.jp/Certificate No. MD00/3871/0005/3 Expiry date: 02/01/2020

10787-2, Ozue, Oaza KadokawaKadokawa-cho, Higashi Usuki-gunMiyazaki-Pref. 889-0611

As at 22 December 2017 42Page

Page 43: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

3.00carbon KobeForgingsMIKI FORGING CO., LTD.MIKI FORGING CO., LTD.MIKI FORGING CO., LTD.MIKI FORGING CO., LTD.3.00carbon-manganese3.00alloy

Tel: +81 6 6472 2931 Fax: +81 6 6475 3116 email: [email protected] Web: www.mikitankou.co.jpCertificate No. MD00/1019/0007/3 Expiry date: 23/07/2019

TakeshimaNishiyodogawa-kuOsaka City

8-29, 5-chome

5.30carbon KobeForgingsMITSUI MEEHANITE METAL CO., LTD.MITSUI MEEHANITE METAL CO., LTD.MITSUI MEEHANITE METAL CO., LTD.MITSUI MEEHANITE METAL CO., LTD.5.30alloy

Tel +81 (0)863 23 2685 Fax +81 (0)863 23 2698 Email: mailto:[email protected] No. MD00/1309/0007/3 Expiry date: 05/11/2018

Tamano CityOkayama Pref.706-8651

TAMANO STEEL CASTING DIVISION3-1-1, Tama

5.00carbon KobeForgingsMIYAZAKI IRON WORKS CO., LTD.MIYAZAKI IRON WORKS CO., LTD.MIYAZAKI IRON WORKS CO., LTD.MIYAZAKI IRON WORKS CO., LTD.5.00alloy

Tel: +81 6 6474 5331 Fax: +81 6 6472 2789Email: mailto: [email protected] No. MD00/1039/0007/3 Expiry date: 02/07/2019

MitejimaNishiyodogawa-kuOsaka

8-6, 3 Chome

5.00carbon NagasakiForgingsNAITO TANZOSHO CO., LTD.NAITO TANZOSHO CO., LTD.NAITO TANZOSHO CO., LTD.NAITO TANZOSHO CO., LTD.5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +81 (0)949 22 5311 Fax: +81 (0)949 28 1565 Email mailto:[email protected] No. MD00/1059/0007/3 Expiry date: 08/12/2019

268 Akaji, Oaza, Kotake-machiKurate-gunFukuoka Pref. 820-1102

1.50carbon YokohamaForgingsNAKAJIMA SANGYO CO., LTD.NAKAJIMA SANGYO CO., LTD.NAKAJIMA SANGYO CO., LTD.NAKAJIMA SANGYO CO., LTD.1.50carbon-manganese1.50austenitic stainless

Tel: +81 (0)3 3790 0511 Fax: +81 (0)3 3790 0510 Email; mailto:[email protected] Web: http://www.nax.co.jpCertificate No. MD00/1060/0008/3 Expiry date: 03/07/2017

Ohta-kuTokyo143-0003

2-6-9, Keihinjima

12.50carbon YokohamaForgingsNIPPON KOSHUHA STEEL Co., Ltd.NIPPON KOSHUHA STEEL Co., Ltd.NIPPON KOSHUHA STEEL Co., Ltd.NIPPON KOSHUHA STEEL Co., Ltd.12.50carbon-manganese12.50alloy12.50austenitic stainless

Including steelmakingTel: +81 766 84 3182 Fax: +81 766 84 3190 Web: http://www.koshuha.co.jpCertificate No. MD00/1086/0007/3 Expiry date: 17/04/2018

Hachiman-machiImizuToyama

Toyama Works10-15, 3-chome

7.50carbon KobeForgingsNIPPON STEEL & SUMITOMO METAL CORPORATIONNIPPON STEEL & SUMITOMO METAL CORPORATIONNIPPON STEEL & SUMITOMO METAL CORPORATIONNIPPON STEEL & SUMITOMO METAL CORPORATION7.50carbon-manganese7.50alloy7.50austenitic stainless

Tel: +81 (0)6 6411 7616 Fax: +81 (0)6 6411 7612 Email: mailto:[email protected] No. MD00/1458/0009/3 Expiry date: 12/11/2019

1, Nishino-choHigashi-MukojimaAmagasaki, 660-0856

Pipe & Tube UnitAmagasaki Works

As at 22 December 2017 43Page

Page 44: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

40.00carbon KobeForgingsNIPPON STEEL & SUMITOMO METAL CORPORATIONNIPPON STEEL & SUMITOMO METAL CORPORATIONNIPPON STEEL & SUMITOMO METAL CORPORATIONNIPPON STEEL & SUMITOMO METAL CORPORATION40.00carbon-manganese40.00alloy

Tel: +81 66466 6119 Fax: +81 66466 6217email: [email protected]

Certificate No. MD00/1778/0010/3 Expiry date: 18/07/2020

Including steelmaking and crankshafts with K1 factor = 1.05 for approved applications

Konohana-kuOsaka441-8510

Osaka Steel Works5-1-109, Shimaya

25.00carbon KobeForgingsOHMI PRESS WORKS & FORGING CO., LTD.OHMI PRESS WORKS & FORGING CO., LTD.OHMI PRESS WORKS & FORGING CO., LTD.OHMI PRESS WORKS & FORGING CO., LTD.25.00carbon-manganese25.00alloy

Tel: +81 0748 83 1511 Fax: +81 0748 83 1312 web: www.omitanko.co.jpCertificate No. MD00/1138/0007/3 Expiry date: 16/11/2018

138 KinoseShigaraki-cho, Koka-shiShiga 529-1802

Shigaraki Plant

25.00carbon KobeForgingsOKAMOTO IRON WORKS CO.OKAMOTO IRON WORKS CO.OKAMOTO IRON WORKS CO.OKAMOTO IRON WORKS CO.25.00carbon-manganese25.00alloy25.00austenitic stainless

Tel: +81 (0)78 681 0271 Fax: +81 (0)78 681 7344 email: [email protected] Number: MD00/1142/0008/3 Expiry: 04/05/2019

2-3 2-chome HigashidemachiHyogo-kuKobe

3.50carbon NagasakiForgingsONOHARA IRON WORKS CO., LTD.ONOHARA IRON WORKS CO., LTD.ONOHARA IRON WORKS CO., LTD.ONOHARA IRON WORKS CO., LTD.3.50carbon-manganese3.50alloy3.50austenitic stainless

Tel: +81 949 24 0392 Fax: +81 949 24 0382 email:[email protected] web: onohara-iw.co.jpCertificate No. MD00/1149/0007/3 Expiry date: 05/11/2019

155 AkaziNogata CityFukuoka Pref. 822-0012

38.00carbon YokohamaForgingsPACIFIC STEEL MFG. CO., LTD.PACIFIC STEEL MFG. CO., LTD.PACIFIC STEEL MFG. CO., LTD.PACIFIC STEEL MFG. CO., LTD.38.00carbon-manganese38.00alloy38.00austenitic stainless

Tel: +81 (0)76 432 4096 Fax: +81 (0)76 441 8226 Email: [email protected]: www.pacificsteelmfg.co.jpIncluding steelmakingCertificate No. MD00/1189/0008/3 Expiry date: 08/10/2018

1-93, Shimoshin NissomachiToyama-cityToyama Pref

0.09carbon YokohamaForgingsRIKEN FORGE CO., LTD.RIKEN FORGE CO., LTD.RIKEN FORGE CO., LTD.RIKEN FORGE CO., LTD.0.09carbon-manganese0.09alloy

Tel: +81 272 51 1834 Fax: +81 272 51 0018 Email: [email protected] No. MD00/1243/0007/3 Expiry date: 06/01/2018

Maebashi-shiGunma371-0846

Maebashi Plant395-3, Motosohja-machi

6.00carbon KobeForgingsSANYO SPECIAL STEEL CO., LTD.,SANYO SPECIAL STEEL CO., LTD.,SANYO SPECIAL STEEL CO., LTD.,SANYO SPECIAL STEEL CO., LTD.,6.00carbon-manganese6.00alloy

As at 22 December 2017 44Page

Page 45: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +81 (0)792 35 6029 Fax: +81 (0)792 35 6027 email: [email protected] web: www.sanyo-steel.co.jp

Approval includes steelmaking.

Heat treatment sub contracted to Toyo Metal Treating Corporation, Takasago Plant No. 2, Takasago, Hyogo Pref., Japan.

Certificate No. MD00/1307/0009/3 Expiry date: 30/10/2019

Shikama-kuHimeji-shi672-8677

3007 Nakashima

45.00carbon NagasakiForgingsSASEBO HEAVY INDUSTRIES CO., LTD.SASEBO HEAVY INDUSTRIES CO., LTD.SASEBO HEAVY INDUSTRIES CO., LTD.SASEBO HEAVY INDUSTRIES CO., LTD.45.00carbon-manganese17.30alloy

Tel: +81 956 25 9188 Fax: +81 956 25 9189

Including crankshafts with K factor > 1.0

Certificate No. MD00/1310/0007/3 Expiry date: 10/12/2017

1, Tategami-choSasebo CityNagasaki Pref. 857-8501

1.00carbon KobeForgingsSEO KOATSU KOGYO CO., LTD.SEO KOATSU KOGYO CO., LTD.SEO KOATSU KOGYO CO., LTD.SEO KOATSU KOGYO CO., LTD.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel: +81 790 28 0590 Fax: +81 790 28 1140Certificate No. MD00/1338/0008/3 Expiry date: 10/11/2019

869-20 Aza Kanzaki Ichikawa-choKanzaki-gunHyogo-pref

Ichikawa Works

20.00carbon YokohamaForgingsSHIMIZU STEEL CO., LTD.SHIMIZU STEEL CO., LTD.SHIMIZU STEEL CO., LTD.SHIMIZU STEEL CO., LTD.20.00carbon-manganese20.00alloy

Tel: +81 (0)286 67 5511 Fax: +81(0) 286 67 3219 Email: [email protected] No. MD00/1357/0007/3 Expiry date: 17/10/2018

Utsunomiya-shiTochigi-ken321-3231

Utsunomiya Plant,8-4, Kiyohara Industrial Park

1.80carbon YokohamaForgingsSHINAGAWA FORGING CO., LTD.SHINAGAWA FORGING CO., LTD.SHINAGAWA FORGING CO., LTD.SHINAGAWA FORGING CO., LTD.1.80carbon-manganese1.80alloy

Tel: +81 295 53 6001 Fax: +81 295 53 6100 email: [email protected] No. MD00/1362/0007/3 Expiry date: 24/01/2019

Hitachiomiya-shiIbaraki Pref.319-2134

Mito Factory654, Kogyodanchi

0.12carbon YokohamaForgingsSNT CorporationSNT CorporationSNT CorporationSNT Corporation0.12carbon-manganese

Tel: +81 (0)293 23 5321 Fax: +81 (0)293 23 5323 email: [email protected] No. MD00/1279/0007/3 Expiry date: 05/05/2019

Takahagi-shiIbaraki-ken318-0004

3333-3, Kamitezuna

0.12carbon YokohamaForgingsSUMIJU PRECISION FORGING CO., LTD.SUMIJU PRECISION FORGING CO., LTD.SUMIJU PRECISION FORGING CO., LTD.SUMIJU PRECISION FORGING CO., LTD.0.12carbon-manganese0.12alloy0.12austenitic stainless

Tel: +81(0)46 869 1790 Fax: +81 (0)46 869 1815 Email mailto:[email protected]: http://www.spf.shi.co.jpCertificate No. MD00/1451/0008/3 Expiry date: 20/01/2020

Yokosuka-shiKanagawa237-8555

19 Natsushima-cho

As at 22 December 2017 45Page

Page 46: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

15.00carbon YokohamaForgingsSUNNAN IRON WORKS CO., LTDSUNNAN IRON WORKS CO., LTDSUNNAN IRON WORKS CO., LTDSUNNAN IRON WORKS CO., LTD15.00carbon-manganese15.00alloy

Tel: +81 54 628 6351 Fax: +81 54 629 6570email: [email protected] Certificate No. MD00/4085/0003/3 Expiry Date: 25/09/2018

Yaizu-shiShizuoka-ken425-0021

4-2-20, Nakaminato

0.60alloy YokohamaForgingsTECHNO-METAL CO., LTDTECHNO-METAL CO., LTDTECHNO-METAL CO., LTDTECHNO-METAL CO., LTD

Scope of approval covers for continuous grain flow crankshafts to 600kgs

Tel: +81 243 23 8152 Fax: +81 243 23 8711 email: [email protected] web: www.t-metal.jp

Certifcate No: MD00/3794/0003/3 Expiry date: 21/11/2018

Takada 100, Nihonmatsu,Fukushima Pref., 964-8585,

Nihonmatsu Plant

10.00carbon-manganese KobeForgingsTHE ENDO CO., LTD.THE ENDO CO., LTD.THE ENDO CO., LTD.THE ENDO CO., LTD.10.00alloy

Tel: +81 852 76 3561 Fax: +81 852 76 3507email: [email protected]

Including crankshafts with K1 factor = 1.05 for approved applications.

Certificate No. MD00/1502/0007/3 Expiry date: 15/12/2019

Yatsuka-choMatsue cityShimane-pref. 690-1401

Shimane Plant1128-4 Eshima

350.00carbon YokohamaForgingsTHE JAPAN STEEL WORKS, LTD.THE JAPAN STEEL WORKS, LTD.THE JAPAN STEEL WORKS, LTD.THE JAPAN STEEL WORKS, LTD.350.00carbon-manganese350.00alloy350.00austenitic stainless

Tel +81 (0)143 22 0451 Fax +81 (0)143 22 5736 Email: https://www.jsw.co.jp/en/contact/Including continuous grain flow crankshafts with K factor 1.05 for approved applications.Certificate No. MD00/1507/0007/3 Expiry date: 10/11/2015

MuroranHokkaido051-8505

Muroran Plant4, Chatsu-machi

2.00carbon KobeForgingsYAMASHITA TANZOSHO CO., LTD.YAMASHITA TANZOSHO CO., LTD.YAMASHITA TANZOSHO CO., LTD.YAMASHITA TANZOSHO CO., LTD.2.00carbon-manganese2.00alloy2.00austenitic stainless

Tel: (0)72 891 1421 Fax (0)72 892 2126Certificate No. MD00/3249/0004/3 Expiry date: 21/07/2018

6 Chome KatanoOsaka pref.

43-1 Ikuno

1.00carbon KobeForgingsYAMAZAKI MACHINERY MFG. CO., LTD.YAMAZAKI MACHINERY MFG. CO., LTD.YAMAZAKI MACHINERY MFG. CO., LTD.YAMAZAKI MACHINERY MFG. CO., LTD.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel +81 748 75 1187 Fax: +81 748 75 1549

E-mail: [email protected]

Web site: www.buhin.co.jp

Certificate No. MD00/1688/0010/3 Expiry date: 05/05/2020

Shiga Pref.

3-2 HieKonan City

As at 22 December 2017 46Page

Page 47: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

KoreaKoreaKoreaKorea

2.00carbon Busan PortForgingsCALTEK CO., LTD.CALTEK CO., LTD.CALTEK CO., LTD.CALTEK CO., LTD.2.00carbon-manganese2.00alloy

Tel: +82 55 346 1458 Fax: +82 55 346 1422Email: [email protected] No. MD00/4404/0002/3 Expiry date: 04/11/2017

Gimhae-siGyeongsangnam-do

1077, Gimhae-daeroHallim-myeon

12.00carbon Busan PortForgingsDA SAN MATERIAL CO., LTD.DA SAN MATERIAL CO., LTD.DA SAN MATERIAL CO., LTD.DA SAN MATERIAL CO., LTD.12.00carbon-manganese12.00alloy

Tel. +82 (0)55 342 3656 Fax +82 (0)55 342 3682 email:[email protected] web: www.dasan.infoCertificate No. MD00/2751/0009/3 Expiry date: 26/11/2018

Hallim-myeon,Gimhae-si,Gyeongsangnam-do

62 Angok-ro 333beon-gil

0.55alloy Busan PortForgingsDAE CHANG FORGING CO., LTD.DAE CHANG FORGING CO., LTD.DAE CHANG FORGING CO., LTD.DAE CHANG FORGING CO., LTD.

Tel: +82 55 310 6825 Fax: +82 55 329 3911 email: [email protected] web: www.dcf.co.ukApproval is restricted to Connecting Rod forgings and Connecting Rod type forgings to the above maximum weight but includes for continuous grain flowCrankshafts to a maximum weight of 170kgs.Certifcate Number: MD00/3742/0004/3 Expiry: 16/02/2019

115-92 Bongnim-ro,Saengnim-myeon, Gimhae-si,Gyeongsangnam-do,

5.00carbon Busan PortForgingsDAE HEUNG IND. CO. LTD.DAE HEUNG IND. CO. LTD.DAE HEUNG IND. CO. LTD.DAE HEUNG IND. CO. LTD.5.00carbon-manganese5.00alloy2.00austenitic stainless

Tel: +82 55 310 6770 Fax: +82 55 3106720 Email: [email protected]: http://daeheungind.krCertificate No. MD00/4249/0003/3 Expiry date: 04/11/2019

Approved for copper alloy forgings with the maximum weight of 250kg

135, Gimhae-daero974beon-gilHallim-myeon, Gimhae-siGyeongsangnam-do

HALLIM FACTORY

20.00carbon UlsanForgingsDONGYANG ENERGY & COMPONENTS CO. LTD.DONGYANG ENERGY & COMPONENTS CO. LTD.DONGYANG ENERGY & COMPONENTS CO. LTD.DONGYANG ENERGY & COMPONENTS CO. LTD.20.00carbon-manganese20.00alloy24.08austenitic stainless

Tel No. +82 542 80 3371 Fax No +82 54 275 7140email: [email protected] web www.dongyangenc.comCertificate Number MD00/3724/0003/3 Expiry date: 20/12/2018

#581-2,Oakmyeong-ri,Daesong-myeon, Nam-gu,Pohang City,Gyeongbuk

Pohang Plant

300.00carbon ChangwonForgingsDOOSAN HEAVY INDUSTRIES & CONSTRUCTION CO., LTD.DOOSAN HEAVY INDUSTRIES & CONSTRUCTION CO., LTD.DOOSAN HEAVY INDUSTRIES & CONSTRUCTION CO., LTD.DOOSAN HEAVY INDUSTRIES & CONSTRUCTION CO., LTD.300.00carbon-manganese300.00alloy300.00austenitic stainless

Tel +82 55 278 4746 Fax no. +82 55 278 [email protected] web www.doosanheavy.comApproval includes semi-built crankshafts.Certificate No. MD00/0883/0007/3 Expiry date: 07/03/2019

Seongsan-gu,Changwon,Kyungnam,

Changwon Plant22, Doosanvolvo-ro,

0.07carbon SeoulForgingsFORMETAL Co., Ltd.FORMETAL Co., Ltd.FORMETAL Co., Ltd.FORMETAL Co., Ltd.0.07carbon-manganese0.07alloy

As at 22 December 2017 47Page

Page 48: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +82 41 670 6251 Fax: +82 41 668 7317email: [email protected]: formetal.co.krCertificate No. MD00/4233/0002/3 Expiry Date: 07/10/2019

Jigok-myeon,Seosan-si,Chungcheongnam-do,

229-7, Mujangsaneop-ro,

2.60carbon Busan PortForgingsFelix Technology Co., Ltd.Felix Technology Co., Ltd.Felix Technology Co., Ltd.Felix Technology Co., Ltd.2.60carbon-manganese2.20alloy2.00austenitic stainless1.50duplex stainless*

Including ring rolling to 2500 mm diameter.

Tel: +82-51-796-7870 Fax: +82-51-796-7897email: [email protected]

Certificate No. MD/00/4269/0002/3 Expiry Date: 16/12/2019

Gangseo-gu,Busan,618-220

85 Mieumsandan 3-ro,

9.00carbon Busan PortForgingsGISAN FORGING CO., LTDGISAN FORGING CO., LTDGISAN FORGING CO., LTDGISAN FORGING CO., LTD9.00carbon-manganese4.50alloy

Tel: +82 55 722 3000 Fax: +82 55 722 3002 email: [email protected] web: www.gisan-forgjng.com

Certificate Number: MD/00/3938/0004/3 Expiry date: 30/07/2020

Hallim-myeon,Gimhae-si,Gyeongsangnam-do,

13 Gimhae-daero,1538 beon-gil,

21.00carbon Busan PortForgingsHAE WON SPECIAL FORGING CO., LTD.HAE WON SPECIAL FORGING CO., LTD.HAE WON SPECIAL FORGING CO., LTD.HAE WON SPECIAL FORGING CO., LTD.21.00carbon-manganese21.00alloy

Tel: +82 (0)55 343 2355 Fax: +82 (0)55 343 2366 Mobile: +82 010 4141 7669 Email to: [email protected]

Certificate No. MD00/3245/0005/3 Expiry date: 14/07/2018

Hallim-myeonGimhae-siGyeongnam

16 Gimhae-daero 1099 beon-gil

0.08carbon ChangwonForgingsHANIL FORGING IND. CO., LTD.HANIL FORGING IND. CO., LTD.HANIL FORGING IND. CO., LTD.HANIL FORGING IND. CO., LTD.0.08carbon-manganese0.08alloy

Tel: +82 55 239 3063 Fax: +82 55 284 7023

Web: www.hifg.co.krCertificate No. MD00/3576/0003/3 Expiry date: 28/03/2018

Sungsan-gu,Changwon,

42, Road 97, Sungju-ro

4.00carbon SeoulForgingsHANIL FORGING IND. CO., LTD.HANIL FORGING IND. CO., LTD.HANIL FORGING IND. CO., LTD.HANIL FORGING IND. CO., LTD.4.00carbon-manganese4.00alloy4.00austenitic stainless

Tel: +82 43 536 5181 Fax: +82 43 536 5172email: [email protected] web: www.hifg.co.kr

Certificate No: MD00/4396/0001/3 Expiry Date: 19/10/2017

87, Seupji-Gil, Ducksan-myun,Jincheon-gun, Chungbuk,

(JINCHEON PLANT)

7.00carbon ChangwonForgingsHSF Co. LTDHSF Co. LTDHSF Co. LTDHSF Co. LTD7.00carbon-manganese7.00alloy7.00austenitic stainless

As at 22 December 2017 48Page

Page 49: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +82 (0)55 344 0795 Fax: +82 (0)55 343 0973 E-mail: [email protected]

Website: www.osungdanjo.com

Certificate No. MD00/3302/0004/3 Expiry date: 05/01/2019

Hallim-myeon,Gimhae-siGyeongnam

122-6, Gimhae-daero 1402 beon-gil,

10.50carbon Busan PortForgingsHWAJOO METAL CO., LTD.HWAJOO METAL CO., LTD.HWAJOO METAL CO., LTD.HWAJOO METAL CO., LTD.10.50carbon-manganese7.50alloy

Tel: 055-366-5006 Fax: 055-366-4050email: [email protected] web: www.hwajoo.com

Certificate No. MD00/3958/0002/3 Expiry date:15/10/2017

42, Yusangongdan 7-gil,Yangsan-si,Gyeongsangnam-do,

38.00carbon ChangwonForgingsHYUNDAI FORGING CO., LTD.HYUNDAI FORGING CO., LTD.HYUNDAI FORGING CO., LTD.HYUNDAI FORGING CO., LTD.38.00carbon-manganese20.00alloy6.50austenitic stainless

Tel: +82 55 580 6533 Fax: +82 55 580 6520 Email mailto:[email protected] Web: http://www.hd-forginf.co.krApproval is restricted to the supply of forged shafts and bars.Certificate No. MD00/3122/0005/3 Expiry date: 08/12/2019

146-1, Hyeonpo-ro, Gunbuk-myeonHaman-GunGyeongsangnam-do

146-1, Hyeonpo-ro

80.00carbon ChangwonForgingsHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANY80.00carbon-manganese60.00alloy

Tel: +82 61 760 7100 Fax: +82 61 725 7733 email: [email protected] web: www.sppycenergy.co.kr

Certificate Number: MD00/3866/0008/3 Expiry date: 11/12/2019

Including Carbon Manganese steel crank throw forgings in Normalised and Normalised and Temepered condition to 26 Tonne.

Approval for C/CMn forgings above 18T weight covers for supply in the Normalised and Normalised and Tempered supply conditions only.

Haeryong-myeonSuncheon City, Jeollanam-doZip code: 540856

46, Yulchonsandan 5-ro

30.00carbon Busan PortForgingsHYUNJIN MATERIALS CO., LTD.HYUNJIN MATERIALS CO., LTD.HYUNJIN MATERIALS CO., LTD.HYUNJIN MATERIALS CO., LTD.30.00carbon-manganese30.00alloy

Tel: +82 51 602 7753 Fax: +82 51 602 7779 Web:http://www.hjmco.co.kr Email: mailto:[email protected] No. MD00/0732/0009/3 Expiry date: 28/11/2018

92, Noksansandan 289-roGangseo-GuBusan

80.00carbon Busan PortForgingsHYUNJIN MATERIALS CO., LTD.HYUNJIN MATERIALS CO., LTD.HYUNJIN MATERIALS CO., LTD.HYUNJIN MATERIALS CO., LTD.80.00carbon-manganese80.00alloy

Including semi built and continous grain flow crankshafts (CGF). CGF crankshafts approved with an enhanced K factor of 1.05.

Tel: +81 51 602 7651/5 Fax: +81 51 602 7600 email: [email protected] web: www.hjmco.co.krCertificate No. MD00/3329/0007/3 Expiry date: 16/03/2019

Gangseo-guBusan

63, Noksanhwajeon-ro

0.04carbon Busan PortForgingsJIN GWANG FORGING CO., LTD.JIN GWANG FORGING CO., LTD.JIN GWANG FORGING CO., LTD.JIN GWANG FORGING CO., LTD.0.04carbon-manganese0.02alloy0.04austenitic stainless

As at 22 December 2017 49Page

Page 50: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel No. 0082 55 329 6661 Fax No. 0082 55 329 6660Email [email protected] www.jk6661.co.krCert No MD00/4192/0002/3 Expiry date: 27/06/2019

#80-112, Golden root-ro, Juchon-myeon,Gimhae-si,Gyeongnam-do

2.00carbon Busan PortForgingsJUNG KWANG INDUSTRY CO., LTDJUNG KWANG INDUSTRY CO., LTDJUNG KWANG INDUSTRY CO., LTDJUNG KWANG INDUSTRY CO., LTD2.00carbon-manganese2.00alloy

Tel: +82 55 344 0034 Fax: +82 55 344 2084

E-mail: [email protected]

Website: www.jung-kwang.com

Certificate No. MD00/3435/0005/3 Expiry date: 23/02/2020

Jinyeong-eupGimhae-siGyeongnam

21,Seobu-ro 378 Beon-gil

1.50carbon Busan PortForgingsK.S.P CO., LTD.K.S.P CO., LTD.K.S.P CO., LTD.K.S.P CO., LTD.1.50carbon-manganese1.50alloy1.50austenitic stainless

Tel: +82 51 831 6270~7 Fax: +82 51 831 6256Email: [email protected] Website:http://www.kspvalve.comCertificate No. MD00/2977/0005/3 Expiry date: 08/05/2018

Gangseo-GuBusan

43, Noksansandan381(sambaekpalsibil)-ro 86,

125.00carbon ChangwonForgingsKISCOKISCOKISCOKISCO125.00carbon-manganese55.00alloy

Tel +82 55 260 0746 Fax +82 55 282 4123 Email mailto:[email protected] Web page http://www.kisco.co.kr

Including steelmakingCertificate No. MD00/0884/0011/3 Expiry date: 24/11/2018

ChangwonGyeongnam

12, Gongdan-ro103 beon-gil, Seongsan-gu

4.15carbon UlsanForgingsKOREA FLANGE Co. Ltd.KOREA FLANGE Co. Ltd.KOREA FLANGE Co. Ltd.KOREA FLANGE Co. Ltd.4.15carbon-manganese0.17alloy4.15austenitic stainless0.70duplex stainless*

Tel +82 52 279 4253 Fax +82 52 260 2670eMail [email protected] Web www.kofco.com

Certificate No. MD00/0882/0008/3 Expiry date: 20/03/2020

45, Shinyeocheon-ro, 35 Bean-gil,Nam-GuUlsan

0.02austenitic stainless SeoulForgingsKPF (Korea Parts & Fasteners)KPF (Korea Parts & Fasteners)KPF (Korea Parts & Fasteners)KPF (Korea Parts & Fasteners)

Tel: +82 43 849 1152 Fax: +82 43 849 1233 Email:mailto:[email protected] Web: http://www.kpf.co.krCertificate No. MD00/2841/0006/3 Expiry date: 20/06/2018

Chungju-siChungcheongbuk-do380-250

50, Chungjusandan 5-ro

10.00carbon Busan PortForgingsMYSCO CO., LTD.MYSCO CO., LTD.MYSCO CO., LTD.MYSCO CO., LTD.10.00carbon-manganese7.00alloy7.00austenitic stainless

Tel:+82 55 720 6143 Fax: +82 55 720 6159 email: [email protected] web: www.mysco.co.krCertificate Number: MD00/3167/0005/3 Expiry: 11/01/2019

Juchon-myeonGimhae-siGyeongsangnam-do,

117, Seobu-ro 1499 beon-gil,

As at 22 December 2017 50Page

Page 51: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

52.70carbon ChangwonForgingsMYSCO CO., LTD.MYSCO CO., LTD.MYSCO CO., LTD.MYSCO CO., LTD.52.70carbon-manganese52.70alloy20.00austenitic stainless

Tel No: +83 55 720 6140 Fax No: +83 55 720 6199Email: [email protected]: www.mysco.co.krCertificate No: MD00/3944/0003/3 Expiry date: 04/09/2017

49, Bonsan-ro, 193, Beon-gil,Jinyeong-eup, Gimhae-si,Gyeongnam.

5.00carbon Busan PortForgingsNAM KYOUNG S.M. Co., Ltd.NAM KYOUNG S.M. Co., Ltd.NAM KYOUNG S.M. Co., Ltd.NAM KYOUNG S.M. Co., Ltd.5.00carbon-manganese5.00alloy

Tel: +82 55 346 6696 Fax: +82 55 346 6697 Email: mailto:[email protected]: www.namkyoungsm.co.krCertificate No. MD00/3917/0004/3 Expiry date: 03/07/2020

Hallim-myeon, Gimhae-siGyeongsangnam-do

58, Yongdeok-ro 302 beon-gil

30.00carbon Busan PortForgingsPSM, INC.PSM, INC.PSM, INC.PSM, INC.30.00carbon-manganese30.00alloy30.00austenitic stainless

Tel: +82 (0) 51 974 5874 Fax: +82 (0) 51 974 5885 Email: [email protected] Web: http://www.psminc.co.krCertificate No. MD00/1779/0008/3 Expiry date: 05/09/2018

93, Noksanhwajeon-ro,Gangseo-GuBusan

Nok San Factory

0.02carbon Busan PortForgingsSAEWON METAL CO., LTD.SAEWON METAL CO., LTD.SAEWON METAL CO., LTD.SAEWON METAL CO., LTD.0.02carbon-manganese

Tel +82 (0)55 328 6401 Fax: +82 (0)55 338 6450email: [email protected]

Certificate No. MD00/3906/0002/3 Expiry date: 24/04/2017

Approved for close die forging only.Heat treatment sub-contracted.

1499 beon-gil,Juchon-myeon, Gimhae-si,Gyeongsangram-do,

25-54, Seobu-ro

7.00carbon Busan PortForgingsSAM BOO METAL CO., LTD.SAM BOO METAL CO., LTD.SAM BOO METAL CO., LTD.SAM BOO METAL CO., LTD.7.00carbon-manganese7.00alloy

Tel +82 (0)51 831 1478 Fax: +82 (0)51 831 2310 Email: [email protected]: www.samboometal.comCertificate No. MD00/2933/0005/3 Expiry date: 07/11/2017

14 beon-Gil, Gangseo-GuBusan

17-6 Noksansandan 261-Ro

6.67carbon Busan PortForgingsSAMBU STAINLESS FORGING CO., LTD.SAMBU STAINLESS FORGING CO., LTD.SAMBU STAINLESS FORGING CO., LTD.SAMBU STAINLESS FORGING CO., LTD.6.67carbon-manganese6.67alloy6.67austenitic stainless6.67duplex stainless*

Tel No: +82 51 316 3241 Fax No: +82 51 316 3242

Email: [email protected]

Web: www.sambust.co.kr

Certificate No: MD00/4275/0002/3 Expiry Date: 28/12/2019

#596-14 Hwajeon-Dong,Kangseo-Gu,Busan

As at 22 December 2017 51Page

Page 52: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.23carbon ChangwonForgingsSAMMI METAL PRODUCTS CO., LTD.SAMMI METAL PRODUCTS CO., LTD.SAMMI METAL PRODUCTS CO., LTD.SAMMI METAL PRODUCTS CO., LTD.0.23carbon-manganese1.20alloy0.02martensitic stainless*

Including Closed die continuous grain flow alloy steel crankshafts with a K factor K1 = 1.05

Tel: +82 55 269 0852 Fax: +82 55 282 9204

E-mail: [email protected]

Web:www.sammiforge.co.kr

Certificate No. MD00/1293/0008/3 Expiry date: 13/10/2019

Changwon-cityKyungnam641-315

55, Sungsan-dong

0.05carbon SeoulForgingsSAMSHIN LIMITEDSAMSHIN LIMITEDSAMSHIN LIMITEDSAMSHIN LIMITED0.05carbon-manganese0.05alloy0.05austenitic stainless

Tel: + 82-41-560-6000 Fax: +82-41-561-1950

Website: www.shamshinvalves.co.kr

Certificate No: MD00/4735/0001/3 15/11/2017

Ipjang-Myeon,Seobuk-Gu,Cheonan-Si.

1138-11, Seongjin-Ro,

57.00carbon UlsanForgingsSEOHAN ENP CO., LTD.SEOHAN ENP CO., LTD.SEOHAN ENP CO., LTD.SEOHAN ENP CO., LTD.57.00carbon-manganese34.70alloy

Tel: +82 707 404 6210 Fax: +82 54 620 3141

email [email protected]

Web http://www.seohanenp.com

Certificate No. MD00/3661/0005/3 Expiry date: 22/08/2018

#173-47, Yongmyeong-ri,Geoncheon-eup, Gyeongju-si,Gyeongbuk, 780-903,

10.00carbon ChangwonForgingsSHIN WOO METAL CO., LTD.SHIN WOO METAL CO., LTD.SHIN WOO METAL CO., LTD.SHIN WOO METAL CO., LTD.10.00carbon-manganese10.00alloy10.00austenitic stainless

Tel No: +82 55 585 2830 Fax No:+82 55 585 2836Email: [email protected]: www.shinwoometal.co.krCertificate No: MD00/4600/0001/3 Expiry Date 28/07/2019

10, Hamansandan 3-gilGunbuk-myeon, Haman-GunGyeongsangnam-do

HAMAN FACTORY

7.00carbon Busan PortForgingsSYF Co., Ltd.SYF Co., Ltd.SYF Co., Ltd.SYF Co., Ltd.7.00carbon-manganese7.00alloy7.00austenitic stainless

Tel: +82 55 329 3520 Fax: +82 55 728 3524 Email: [email protected] No. MD00/0367/0008/3 Expiry date: 09/02/2020

Saengrim-MyunKimhae-SiKyungnam

410, Bonglim-Ri

110.00carbon MokpoForgingsSeAH BESTEEL CORPORATIONSeAH BESTEEL CORPORATIONSeAH BESTEEL CORPORATIONSeAH BESTEEL CORPORATION110.00carbon-manganese110.00alloy

As at 22 December 2017 52Page

Page 53: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +82 63 460 8216 Fax: +82 63 460 8423email: [email protected] web: www..seahbestell.co.kr

Certificate No. MD00/1749/0010/3 Expiry date: 03/04/2018

Including combined web and pin forgings for semi built crankshafts in Carbon Manganese steel, supplied in Normalised or Normalised and Temperedcondition, up to 48.3T weight.

Gunsan CityJeonlabuk-Do

Gunsan Plant1-6, Soryong-Dong

90.00carbon ChangwonForgingsSeAH CHANGWON INTEGRATED SPECIAL STEELSeAH CHANGWON INTEGRATED SPECIAL STEELSeAH CHANGWON INTEGRATED SPECIAL STEELSeAH CHANGWON INTEGRATED SPECIAL STEEL90.00carbon-manganese30.00alloy8.00austenitic stainless

Tel: +82 (0)55 269 6727 Fax: +82 (0)55 269 6907 Emal:mailto:[email protected] Web: http://www.poscoss.comIncluding steelmakingCertificate No. MD00/1294/0014/3 Expiry date: 08/09/2020

Seongsan-GuChangwon,Gyeongnam

CORPORATION147,Jeokhyeon-Ro

5.00carbon Busan PortForgingsTAE HEUNG FORGING. CO., LTDTAE HEUNG FORGING. CO., LTDTAE HEUNG FORGING. CO., LTDTAE HEUNG FORGING. CO., LTD5.00carbon-manganese4.00alloy2.00austenitic stainless

Tel: +82 55 329 2841 Fax: +82 55 329 2844 Email: [email protected] Web: http://www.thf.co.krApproval includes for heat treatment carried out internally and sub-contract by Dae Chang Metal Heat Treatment Co. Ltd of #1494-4, Songgok-ri,Dassan-Myeun, Goryung-Gun, Kyung Buk, Korea.Certificate Number: MD00/3838/0003/3 Expiry date: 21/09/2019

#413-2 Saengnim-daeroGimhae-Si,Gyeongsangnam-Do,

0.02carbon Busan PortForgingsTAE HUNG METAL CO.TAE HUNG METAL CO.TAE HUNG METAL CO.TAE HUNG METAL CO.0.02carbon-manganese0.02alloy

Tel: +82 51 311 5803 Fax: +82 51 325 8213 Email: mailto: [email protected] Number: MD00/3474/0005/3 Expiry: 31/05/2020

970 Beon-Gil (Rd.)55 Nakdong-daero (Blvd,) Sasang-guBusan

8.00carbon Busan PortForgingsTAESANG CO., LTD.TAESANG CO., LTD.TAESANG CO., LTD.TAESANG CO., LTD.8.00carbon-manganese8.00alloy8.00austenitic stainless

Tel +82 (0)51 209 9044 Fax +82 (0)51 209 9001 Email mailto:[email protected]: http;//www.taesang.co.krCertificate No. MD00/1476/0012/3 Expiry date: 04/06/2019

176beongil,Saha-gu,Busan,

30, Dasan-ro,

130.00carbon Busan PortForgingsTAEWOONG CO., LTD.TAEWOONG CO., LTD.TAEWOONG CO., LTD.TAEWOONG CO., LTD.130.00carbon-manganese60.00alloy60.00austenitic stainless

Tel: +82 51 329 5105 Fax: +82 51 329 5101

Email: [email protected]

Web http://www.taewoong.com

Certificate No. MD00/2833/0007/3 Expiry date: 07/10/2019

Noksan National Industrial Complex67, Noksansandan 27-ro,Gangseo-Gu, Busan

Noksan Factory

7.00carbon Busan PortForgingsWONIL F & T CO., LTD.WONIL F & T CO., LTD.WONIL F & T CO., LTD.WONIL F & T CO., LTD.7.00carbon-manganese6.00alloy3.00austenitic stainless1.92duplex stainless*

As at 22 December 2017 53Page

Page 54: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel No: +881 55346 0680 Fax No:+81 55 346 4832

Email: [email protected]

Certificate No: MD00/4208/0004/3 Expiry Date: 21/07/2019

Hallim - myeon,Gimhae-si,Gyeongsangnam-do

468, Angok-ro,

0.01carbon Busan PortForgingsWOOSUNG COMPANYWOOSUNG COMPANYWOOSUNG COMPANYWOOSUNG COMPANY0.01carbon-manganese

Tel: +51 265 7466 Fax: +51 265 7468 Email: mailto:[email protected] http://www.wsdf.co.krCertificate No. MD00/3207/0005/3 Expiry date: 12/12/2017

208 Beon-gilSaha-Gu

7, Dasan-Ro

14.00carbon Busan PortForgingsYCF CO., LTD.YCF CO., LTD.YCF CO., LTD.YCF CO., LTD.14.00carbon-manganese8.00alloy7.20austenitic stainless

Tel: +82 055 724 9200 Fax: +82 055 724 9208

email: [email protected]

Certificate No. MD00/4322/0003/3 Expiry Date: 10/04/2019

Hallim-myeonGimhae-siGyeongsangnam-do

31-8, Anha-ro 116 beon-gil

5.20carbon ChangwonForgingsYOUNG JIN FORGING CO., LTD.YOUNG JIN FORGING CO., LTD.YOUNG JIN FORGING CO., LTD.YOUNG JIN FORGING CO., LTD.5.20carbon-manganese5.20alloy

Tel: +82 55 239 5581 Fax: +82 55 282 2676 Email: [email protected]: http://www.yjforging.co.krCertificate No. MD00/4583/0001/3 Expiry date: 22/05/2019

Haman-gunGyeongnam

No 791-2, Yongsan-RiChilwon-myeon

MexicoMexicoMexicoMexico

5.00carbon VeracruzForgingsFRISA FORJADOS S.A.DE C.V.FRISA FORJADOS S.A.DE C.V.FRISA FORJADOS S.A.DE C.V.FRISA FORJADOS S.A.DE C.V.5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless*5.00martensitic stainless*

Tel: +52 81 8153 0300 ext. 2046 Fax: +52 81 8336 2175 Email: [email protected] Web: http://www.frisa.com*accepted for approved applications Certificate Number: MD00/2788/0006/3 Expiry: 25/03/2019

Col. Los TreviñoSanta Catarina N.L.66350

Valentin G. Rivero 127

0.02carbon VeracruzForgingsTHYSSENKRUPP METALURGICA DE MEXICO S.A. de C.V.THYSSENKRUPP METALURGICA DE MEXICO S.A. de C.V.THYSSENKRUPP METALURGICA DE MEXICO S.A. de C.V.THYSSENKRUPP METALURGICA DE MEXICO S.A. de C.V.0.02carbon-manganese

Tel:+52 222 223 7042 Fax: +52 222 223 7040 Email: [email protected] www.thyssenkrupp-metalurgica.comIncluding connecting rods made of microalloyed steel using controlled cooling. Certificate No. MD00/3092/0004/3 Expiry date: 07/07/2019

San Miguel XoxtlaPueblaCP 72620

Camino a Santa Agueda 1

As at 22 December 2017 54Page

Page 55: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

MontenegroMontenegroMontenegroMontenegro

6.00carbon BeogradForgingsTOSlELIK NIKŠIl dTOSlELIK NIKŠIl dTOSlELIK NIKŠIl dTOSlELIK NIKŠIl d....oooo....oooo....6.00carbon-manganese6.00alloy

Tel: +382 40 202 222 email: [email protected]

Certificate No: MD00/4508/0001/3 Expiry Date: 03/09/2018

Vuka Karadzica bb,81400 Niksic

NorwayNorwayNorwayNorway

5.00carbon StavangerForgingsSTAVANGER STEEL ASSTAVANGER STEEL ASSTAVANGER STEEL ASSTAVANGER STEEL AS5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless5.00martensitic stainless*5.00precipitation hardened

stainless*

Tel +47 51 74 34 00 Mob: +47 907 47 955 email: [email protected] web: www.stavangersteel.no

* accepted for approved applications

Certificate No. MD00/1313/0008/3 Expiry date: 14/08/2017

N-4100 JørpelandStaalverksvegen 51

PolandPolandPolandPoland

11.00carbon KatowiceForgings"KUZNIA BATORY" Sp. z o.o."KUZNIA BATORY" Sp. z o.o."KUZNIA BATORY" Sp. z o.o."KUZNIA BATORY" Sp. z o.o.11.00carbon-manganese11.00alloy11.00austenitic stainless

Tel: +48 32 7937799 Fax: +48 32 7500669Mobile: +48 698 665 906Email: [email protected] web: www.kuzniabatory.plCertificate No. MD00/2879/0006/3 Expiry date: 29/09/2019

41-506 Chorzówul.Stalowa 1

0.30carbon KatowiceForgingsATI ZKM Forging Sp. z o.o.ATI ZKM Forging Sp. z o.o.ATI ZKM Forging Sp. z o.o.ATI ZKM Forging Sp. z o.o.0.30carbon-manganese0.30alloy

Tel: +48 15813 4337 Fax: +48 15813 5617 Email: [email protected] Web: http://www.ATImetals.comCertificate No. MD00/2904/0007/3 Expiry date: 25/05/2020

ul. Grabskiego 5437-450 Stalowa Wola

125.00carbon KatowiceForgingsCELSA "HUTA OSTROWIEC" Sp. z o.o.CELSA "HUTA OSTROWIEC" Sp. z o.o.CELSA "HUTA OSTROWIEC" Sp. z o.o.CELSA "HUTA OSTROWIEC" Sp. z o.o.125.00carbon-manganese125.00alloy

Tel: +48 (0)41 249 2905 E--mail: [email protected]

Website: www.celsaho.com

Including crankshafts with K factor > 1.0 for approved applications

Certificate No. MD00/2006/0010/3 Expiry date: 24/10/2019

ul. Samsonowicza 227-400 Ostrowiec Swietokrzyski

ZAKLAD WYROBOW KUTYCH

10.00carbon KatowiceForgingsHSW - KUZNIA STALOWA WOLA Sp. z o.o.HSW - KUZNIA STALOWA WOLA Sp. z o.o.HSW - KUZNIA STALOWA WOLA Sp. z o.o.HSW - KUZNIA STALOWA WOLA Sp. z o.o.10.00carbon-manganese10.00alloy

As at 22 December 2017 55Page

Page 56: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +48 15 813 56 64 +48 15 8135410 Fax: +48 15 813 54 70

E-mail: [email protected] [email protected]

Website: www.kuzniastalowola.pl

Certificate No. MD00/2407/0007/3 Expiry date: 15/05/2020

ul. Kwiatkowskiego 137-450 Stalowa Wola

3.00carbon KatowiceForgingsHUTA BANKOWA Sp. z o.o.HUTA BANKOWA Sp. z o.o.HUTA BANKOWA Sp. z o.o.HUTA BANKOWA Sp. z o.o.3.00carbon-manganese3.00alloy

Tel +48 32 295 7430 Fax +48 32 262 3788 Email: [email protected]; [email protected] Web http://www.hutabankowa.com.plCertificate No. MD00/0716/0004/3 Expiry date: 05/03/2019

The scope of approval covers only the manufacturer of ring type forgings with the maximum diameter of 300 mm

ul. Sobieskiego 2441-300 Dabrowa Górnicza

1.50carbon KatowiceForgingsKUZNIA "GLINIK" Sp. z o.o.KUZNIA "GLINIK" Sp. z o.o.KUZNIA "GLINIK" Sp. z o.o.KUZNIA "GLINIK" Sp. z o.o.1.50carbon-manganese1.50alloy

Tel: +48 18 35 49 525 Fax: +48 18 35 49 504Email: mailto: [email protected] Web: http://www.kuznia.glinik.plCertificate Number: MD00/2131/0008/3 Expiry: 24/09/2018

ul. Chopina 33a38-320 Gorlice

0.03carbon KatowiceForgingsKUZNIA JAWOR S.A. GRUPA GWARANTKUZNIA JAWOR S.A. GRUPA GWARANTKUZNIA JAWOR S.A. GRUPA GWARANTKUZNIA JAWOR S.A. GRUPA GWARANT0.03carbon-manganese0.03alloy0.03austenitic stainless

Tel +48 (0)76 8707612 Fax: +48 (0)76 8702782 email: [email protected] web: www.kuznia.com.pl

Certificate No. MD00/2931/0005/3 Expiry date: 18/11/2017

ul. Kuziennicza 459-400 Jawor

0.18carbon KatowiceForgingsPRZEDSIEBIORSTWO ROBOT INZYNIERYJNYCHPRZEDSIEBIORSTWO ROBOT INZYNIERYJNYCHPRZEDSIEBIORSTWO ROBOT INZYNIERYJNYCHPRZEDSIEBIORSTWO ROBOT INZYNIERYJNYCH0.18carbon-manganese0.18alloy

Tel: +48 32 3453125 (ext.66) Fax:+48 32 3453125 (ext.60) Email: [email protected] or [email protected] Web: http://www.minec.plCertificate Number: MD00/4147/0002/3 Expiry: 15/04/2019

ul. Metalowcow 441-500 Chorzow

"MINEC" Sp. z.o.o.KUZNIA ,,MINEC"

28.00carbon KatowiceForgingsZARMEN FPA Sp.z o.o.ZARMEN FPA Sp.z o.o.ZARMEN FPA Sp.z o.o.ZARMEN FPA Sp.z o.o.28.00carbon-manganese28.00alloy

Tel: +48 77 5457008 Fax: +48 77 5457099Email: [email protected] www.zarmenfpa.plCertificate No. MD00/3455/0005/3 Expiry date: 05/04/2020

37-330 Zdzieszowiceul. Filarskiego 39

RomaniaRomaniaRomaniaRomania

100.00carbon GalatzForgingsDOOSAN IMGB S.ADOOSAN IMGB S.ADOOSAN IMGB S.ADOOSAN IMGB S.A100.00carbon-manganese100.00alloy

Tel: +40 21 301 2849 Fax: +40 21 301 2502 Email: [email protected]

Website: www.doosanimgb.com

Including steelmaking.

Certificate No. MD00/1259/0011/3 Expiry date: 08/09/2020

Berceni Road Nr. 104Sector 4041919 Bucharest

As at 22 December 2017 56Page

Page 57: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

2.50carbon GalatzForgingsS.C. FORJA NEPTUN S.R.L.S.C. FORJA NEPTUN S.R.L.S.C. FORJA NEPTUN S.R.L.S.C. FORJA NEPTUN S.R.L.2.50carbon-manganese2.00alloy

Tel +40 244 307150(82) Fax +40 244 307152email [email protected] web www.forjaneptun.roCertificate No. MD00/3324/0005/3 Expiry date: 09/03/2019

105200 BaicoiStr. Infratirii nr. 295

5.00carbon GalatzForgingsS.C. FORJA ROTEC S.R.L.S.C. FORJA ROTEC S.R.L.S.C. FORJA ROTEC S.R.L.S.C. FORJA ROTEC S.R.L.5.00carbon-manganese5.00alloy2.00austenitic stainless

Tel: +40 238 406 046 Fax: +40 238 718 935email: [email protected] web: www.forjarotec.ro

Certificate No: MD00/4475/0001/3 Expiry Date: 26.04.2018

12 Aleea Industriilor Street,120068 Buzau,

0.45carbon GalatzForgingsS.C. FORSEV S.A.S.C. FORSEV S.A.S.C. FORSEV S.A.S.C. FORSEV S.A.0.45carbon-manganese0.45alloy

Tel: +40 (0)252 326 890 Fax: +40 (0)252 326 002 Email: mailto: [email protected] and [email protected] www.forsev.roCertificate No. MD00/3008/0005/3 Expiry date: 20/09/2018

220242, Drobeta Turnu-SeverinJud. Mehedinti

2, Portile de Fier Street

3.20carbon GalatzForgingsS.C. MENAROM P.E.CS.C. MENAROM P.E.CS.C. MENAROM P.E.CS.C. MENAROM P.E.C3.20carbon-manganese3.20alloy

Tel +40 236 448931 Fax: +40 236 448257 Email: [email protected] Web: http://www.menarom.roCertificate No. MD00/2847/0007/3 Expiry date: 29/11/2019

800219-Galatz12 Calea Prutului Street

4.00carbon GalatzForgingsVILMAR S.A.VILMAR S.A.VILMAR S.A.VILMAR S.A.4.00carbon-manganese1.00alloy1.00austenitic stainless1.00duplex stainless*

Tel: +40 250 703 850 Fax: +40 250 703 865 Email: [email protected] Web: http://www.genoyer.ro* accepted for approved applicationsCertificate No. MD00/2063/0007/3 Expiry date: 20/02/2018

No. 1, Platforma Industriala Street240050, Râmnicu-Vâlcea

Forging Division

RussiaRussiaRussiaRussia

10.00carbon St. PetersburgForgingsCHELYABINSK METALLURGICAL PLANT PAOCHELYABINSK METALLURGICAL PLANT PAOCHELYABINSK METALLURGICAL PLANT PAOCHELYABINSK METALLURGICAL PLANT PAO10.00carbon-manganese10.00alloy

Tel: +7 351 725 57 27 Fax: +7 351 725 51 76 Email mailto:[email protected] http://www.mechel.ruHead Office Mechel OAO , 123610, Moscow. Krasnopresnenskaya Naberezhnaya, 12, Office 1002 RussiaCertificate #: MD00/3261/0007/3 Expiry date: 10/08/2018

2-d Paveletskaya St - 14

URALS STAMPING PLANT OAO, CHELYABINSK BRANCH454047-Chelyabinsk

200.00Ni Alloy St. PetersburgForgingsCMKCMKCMKCMK

Tel: +7 (496) 644 70 30 Fax: +7 (496) 644 70 02

E:mail: [email protected]

Website: www.cmkgroup.ru

Certificate No: MD00/4668/0001/3 Expiry Date: 05/03/2020

142800 Stupino,Moscow Region.

Pristansionnaya Street, Possession 2,

As at 22 December 2017 57Page

Page 58: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

9.20carbon St. PetersburgForgingsKAMASTAL LLCKAMASTAL LLCKAMASTAL LLCKAMASTAL LLC9.20carbon-manganese9.20alloy

Tel +8 342 260 7317 Fax +8 342 260 7462 Email: [email protected] Web: http://www.mzperm.ruCertificate No. MD00/4608/0001/3 Expiry date: 08/09/2019

614014, Perm1905 Street, 35

120.00carbon St. PetersburgForgingsOMZ - Special SteelsOMZ - Special SteelsOMZ - Special SteelsOMZ - Special Steels120.00carbon-manganese120.00alloy

Phone: +7 812 322 81 50 Fax: +7 812 322 81 07 email: [email protected] web: www.omz-specialsteel.comIncluding steelmakingCertificate No. MD00/2226/0007/3 Expiry date: 23/06/2019

Izhorsky Zavod, Kolpino,Saint-Petersburg, 196650,

SloveniaSloveniaSloveniaSlovenia

24.00carbon ZagrebForgingsMETAL RAVNE d.o.o.METAL RAVNE d.o.o.METAL RAVNE d.o.o.METAL RAVNE d.o.o.24.00carbon-manganese24.00alloy24.00austenitic stainless

Tel: +386 2 870 7200 Fax: +386 2 870 7219email: [email protected] Web: http://www.metalravne.comCertificate No. MD00/2889/0007/3 Expiry date: 30/05/2020

2390 Ravne na KoroškemKoroška cesta 14

SpainSpainSpainSpain

10.00carbon BilbaoForgingsEUSKAL FORGING S.A.EUSKAL FORGING S.A.EUSKAL FORGING S.A.EUSKAL FORGING S.A.10.00carbon-manganese10.00alloy10.00austenitic stainless

Tel: +34 943 691 412 Fax: +34 943 691 654 Email: [email protected] Web: www.euskalforging.comCertificate No. MD00/0541/0007/3 Expiry date: 24/04/2018

Poligono Industrial 20270 Irura20270 IruraGipuzcoa

Gipuzcoa

31.40carbon BilbaoForgingsEUSKAL FORGING S.A.EUSKAL FORGING S.A.EUSKAL FORGING S.A.EUSKAL FORGING S.A.31.40carbon-manganese31.40alloy

Tel No: +39 94 472 3062 Fax +39 94 495 0802Email: [email protected]: www.euskalforging.comCertificate No: MD00/4301/0001/3 Expiry date 27/03/2017

Ribera de la Ria, Poligono s/n48910 SestaoVizcaya

Sestao

4.00carbon BilbaoForgingsFORJAS ALBISU S.A.FORJAS ALBISU S.A.FORJAS ALBISU S.A.FORJAS ALBISU S.A.4.00carbon-manganese4.00alloy

Tel. 943 16 41 42 Fax. 943 88 09 24 email: [email protected] Web http://www.forjasalbisu.comCertificate No. MD00/2796/0006/3 Expiry date: 12/05/2019

20210 LazkaoGuipuzcoa

C/Zubierreka Auzoa 12P.O. Box 12

0.32carbon BilbaoForgingsFORJAS DE CANTABRIA, S.L.FORJAS DE CANTABRIA, S.L.FORJAS DE CANTABRIA, S.L.FORJAS DE CANTABRIA, S.L.0.32carbon-manganese0.32alloy

Tel: +34 9427 50354 Fax: +34 9427 54206 Email [email protected] Web:http://www.forjasdecantabria.comThe scope of approval includes forged continuous grain flow crankshafts.Certificate Number: MD00/0335/0009/3 Expiry: 05/07/2020

39200 ReinosaCantabria

Paseo Alejandro Calonge,1

As at 22 December 2017 58Page

Page 59: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

10.00carbon BilbaoForgingsGAINZA FORGE S.L.GAINZA FORGE S.L.GAINZA FORGE S.L.GAINZA FORGE S.L.10.00carbon-manganese

Tel: +34 943 14 78 71 Fax: +34 943 14 77 90 email: [email protected] web: www.gainzaforge.com

Certificate No. MD00/2576/0007/3 Expiry date: 17/08/2020

Barrio Agote n× 7E-20740 ZestoaGuipuzcoa

5.00carbon BilbaoForgingsIRIZAR Forge (FORJAS IRIZAR)IRIZAR Forge (FORJAS IRIZAR)IRIZAR Forge (FORJAS IRIZAR)IRIZAR Forge (FORJAS IRIZAR)5.00carbon-manganese5.00alloy2.50austenitic stainless

Tel: +34 943 88 09 36 Fax: +34 943 88 95 72 Email: mailto:[email protected] Web: http://www.forjas-irizar.comThe scope of approval is for heat treatment carried out by sub-contrcator Razya, S.A. San Miguel de Acha 7, 01010 Vitoria, Spain.Certificate No. MD00/2325/0008/3 Expiry date: 07/05/2020

Hiribaren no. 2620210 Lazkao

90.00carbon BilbaoForgingsSIDENOR ACEROS ESPECIALES S.L.SIDENOR ACEROS ESPECIALES S.L.SIDENOR ACEROS ESPECIALES S.L.SIDENOR ACEROS ESPECIALES S.L.90.00carbon-manganese90.00alloy90.00austenitic stainless

Tel: +34 942 775 288 Fax: +34 609 242 896 email: borja.lambea@gsidenor com web www.sidenor.com

Certificate Number: MD00/0546/0010/3 Expiry: 17/06/2020

Including approval of semi built crankshafts with a K factor K1 = 1.05- Plus surface deep rolling process K2 = 1.20

Paseo Alejandro Calonje, 139200 Reinosa (Cantabria)

PLANTA DE REINOSA

0.14carbon BilbaoForgingsULMA Forja, S. Coop.ULMA Forja, S. Coop.ULMA Forja, S. Coop.ULMA Forja, S. Coop.0.14carbon-manganese

Tel: +34 943 780552 Fax: +34 943 781808 email: [email protected] Web: http://www.ulmapiping.es Certificate No. MD00/0430/0007/3 Expiry date: 23/05/2018

P.O. Box 1420560 OñatiGuipúzcoa

B° Zubillaga, 3

0.75carbon BilbaoForgingsULMA LAZKAO FORGING, S.L.ULMA LAZKAO FORGING, S.L.ULMA LAZKAO FORGING, S.L.ULMA LAZKAO FORGING, S.L.0.75carbon-manganese0.75alloy0.75austenitic stainless

Tel: +34 943 805 333 Fax: +34 943 889 137email: [email protected] web: stp.es

Certificate No: MD00/4411/0002/3 Expiry Date: 15/02/2020

Apartado 49,20210 Lazkao,Gipuzcoa,

Zubierreka, 52

SwedenSwedenSwedenSweden

5.00austenitic stainless GothenburgForgingsAB SANDVIK MATERIALS TECHNOLOGYAB SANDVIK MATERIALS TECHNOLOGYAB SANDVIK MATERIALS TECHNOLOGYAB SANDVIK MATERIALS TECHNOLOGY5.00duplex stainless*

Tel: +46 (0) 26 263311email: [email protected] web: www.smt.sandvik.com

Certificate No. MD00/2173/0007/3 Expiry date: 29/10/2018

Approval include semi-finished products of forged round bars with maximum diameter 450mm, 3600mm longApproval include semi-finished products of forged square blooms up to 350mm wide, 4300mm long* for approved applications.

SE-811 81 Sandviken

1.00carbon GothenburgForgingsBHARAT FORGE KILSTA ABBHARAT FORGE KILSTA ABBHARAT FORGE KILSTA ABBHARAT FORGE KILSTA AB1.00carbon-manganese1.00alloy

As at 22 December 2017 59Page

Page 60: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +46 586 247239 Fax: +46 586 63270 Email: [email protected]

Web:http://www.bharatforge.com

Including crankshafts with K factor > 1.0 for approved applications

Certificate Number: MD00/0750/0007/3 Expiry: 07/02/2018

S 69127 KarlskogaBox 428

0.10austenitic stainless StockholmForgingsNORDIC FLANGES ABNORDIC FLANGES ABNORDIC FLANGES ABNORDIC FLANGES AB

Tel: +46 (0) 290 251 91 Fax: +46 (0) 290 259 39 Email mailto:[email protected] Web: http://www.nordicflanges.comCertificate Number: MD00/2983/0006/3 Expiry: 30/05/2018

Kavelvägen 17SE - 894 35 Själevad

3.70carbon GothenburgForgingsOVAKO SWEDEN ABOVAKO SWEDEN ABOVAKO SWEDEN ABOVAKO SWEDEN AB3.70carbon-manganese3.70alloy

Tel: +46 290 251 95 Fax: +46 290 259 39 email: mailto:charlotta [email protected] web: http://www.ovako.comCertificate Number: MD00/3710/0003/3 Expiry: 26/11/2017

813 83 HoforsBusiness Unit Tube & Ring

60.00carbon GothenburgForgingsSCANA STEEL BJÖRNEBORG ABSCANA STEEL BJÖRNEBORG ABSCANA STEEL BJÖRNEBORG ABSCANA STEEL BJÖRNEBORG AB60.00carbon-manganese60.00alloy

Tel: +46 550 251 30 Fax: +46 550 269 5884email: [email protected] web: www.scana.no

Certificate Number: MD00/2769/0005/3 Expiry: 02/08/2018

Kristinehamnsvägen 2S-68071 Björneborg

6.00carbon GothenburgForgingsSODERFORS STEEL ABSODERFORS STEEL ABSODERFORS STEEL ABSODERFORS STEEL AB6.00carbon-manganese6.00alloy

Tel: +46 293 177 60 Mob: +46 72 208 50 38email: [email protected] web: www.sosteel.se

Certificate No: Expiry Date:

Mellanverksvägen,815 04 Söderfors

SwitzerlandSwitzerlandSwitzerlandSwitzerland

5.00carbon HamburgForgingsIMBACH & CIE AGIMBACH & CIE AGIMBACH & CIE AGIMBACH & CIE AG5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +41 62 748 44 44 Fax: +41 62 748 44 40email: [email protected] web: www.imbach.com

Certificate No. MD00/0752/0007/3 Expiry date: 09/08/2017

CH-6244 NebikonStämpfelfeld 9,

5.00carbon StuttgartForgingsSCHMIEDEWERK STOOSS AG.,SCHMIEDEWERK STOOSS AG.,SCHMIEDEWERK STOOSS AG.,SCHMIEDEWERK STOOSS AG.,5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless*5.00ferritic stainless*

Tel: +41 (0)43 322 6210 Fax: +41 (0)43 322 6201

E-mail: [email protected]

Website: www.stooss.com

* accepted for approved applications

Certificate No. MD00/2046/0008/3 Expiry date: 18/07/2020

Maienbrunnenstrasse 8Postfach 45CH-8908 HEDINGEN

As at 22 December 2017 60Page

Page 61: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Taiwan, Republic of ChinaTaiwan, Republic of ChinaTaiwan, Republic of ChinaTaiwan, Republic of China

0.05carbon KaohsiungForgingsBOTH-WELL STEEL FITTINGS Co. Ltd.BOTH-WELL STEEL FITTINGS Co. Ltd.BOTH-WELL STEEL FITTINGS Co. Ltd.BOTH-WELL STEEL FITTINGS Co. Ltd.0.05austenitic stainless

Tel: +886 7371 1536 Fax: +886 7371 3864 Email: mailto:[email protected] Web: http://www.bothwell.com.twCertificate No. MD00/0208/0007/3 Expiry date: 13/02/2018

Ren-Wu DistrictKaohsiung City 81460

No. 303, Ren-Sin Road

16.00carbon KaohsiungForgingsNAN LUNG STEEL & IRON CORPORATIONNAN LUNG STEEL & IRON CORPORATIONNAN LUNG STEEL & IRON CORPORATIONNAN LUNG STEEL & IRON CORPORATION16.00carbon-manganese

Tel: +886 7 616 2931 Fax: +886 7 616 6789 Email: mailto:[email protected] Certificate Number: MD00/2722/0007/3 Expiry: 14/07/2018

Yen Chao DistrictKaohsiung City

No. 344, Chang An Road

10.00carbon KaohsiungForgingsSAN ENG STEEL FORGING CO., LTD.SAN ENG STEEL FORGING CO., LTD.SAN ENG STEEL FORGING CO., LTD.SAN ENG STEEL FORGING CO., LTD.10.00carbon-manganese

Tel: +886 7 3724249 Fax: +886 7 3712923 Email: mailto:[email protected] Web: http://www.saneng.com.twCertificate No. MD00/1299/0007/3 Expiry date: 09/02/2018

Renwu Dist.No. 311 Ren-Sin Road

The NetherlandsThe NetherlandsThe NetherlandsThe Netherlands

1.25alloy AmsterdamForgingsGROFSMEDERIJ NIEUWKOOP B.V.GROFSMEDERIJ NIEUWKOOP B.V.GROFSMEDERIJ NIEUWKOOP B.V.GROFSMEDERIJ NIEUWKOOP B.V.

Tel: +31 (0)172 579303 Fax: +31 (0)172 571073email: [email protected] web: www.gnweb.com

Certificate No:MD00/4618/0002/3 Expiry Date: 04/10/2019

Transportweg 47,2421 LT Nieuwkoop,Zuid Holland,

TurkeyTurkeyTurkeyTurkey

5.60carbon IstanbulForgingsAKMETAL METALURJI ENDUSTRISI A.S.AKMETAL METALURJI ENDUSTRISI A.S.AKMETAL METALURJI ENDUSTRISI A.S.AKMETAL METALURJI ENDUSTRISI A.S.5.60carbon-manganese5.60alloy

Tel +90 216 593 03 08 Fax: +90 216 593 03 82 email: [email protected] web: www.akmetal.comCertificate No. MD00/2811/0004/3 Expiry date: 12/07/2020

Tepeören Mah, No. 23634959 TuzlaIstanbul

Eski Ankara Asfalti cad.

0.19carbon-manganese IstanbulForgingsKANCA EL ALETLERI DÖVME ÇELIK VE MAKINE SANAYII A.S.KANCA EL ALETLERI DÖVME ÇELIK VE MAKINE SANAYII A.S.KANCA EL ALETLERI DÖVME ÇELIK VE MAKINE SANAYII A.S.KANCA EL ALETLERI DÖVME ÇELIK VE MAKINE SANAYII A.S.0.19alloy

Tel No: +90 216 678 86 00 Fax No: +90 216 678 86 01

Email: [email protected] & [email protected]

Web: www.kanca.com.

Certificate No: MD00/4100/0002/3 Expiry date 26/11/2018

1.Cadde41480 Sekerpinar ÇayirovaÇayirova - Kocaeli

TOSB ( Taysad Org. San Bölg.)

UkraineUkraineUkraineUkraine

12.00carbon MykolaivForgings "FERRIT" Additional Liability Company" "FERRIT" Additional Liability Company" "FERRIT" Additional Liability Company" "FERRIT" Additional Liability Company"12.00carbon-manganese

Tel: +380 56 775 1974 Fax: +380 56 741 7339email: [email protected] web: www.ferrit.dp.uaCertificate No. MD00/2819/0007/3 Expiry date: 01/09/2019

Post code 49101Dnepropetrovsk

3, Sukhoi Ostrov St.

As at 22 December 2017 61Page

Page 62: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

95.00carbon MykolaivForgingsPJSC "ENERGOMASHSPETSSTAL"PJSC "ENERGOMASHSPETSSTAL"PJSC "ENERGOMASHSPETSSTAL"PJSC "ENERGOMASHSPETSSTAL"95.00carbon-manganese95.00alloy

Tel: +38 (06264) 6-94-93 Fax: +38 (06264) 6-94-93Email: [email protected] No. MD00/3575/0004/3 Expiry date: 15/03/2018

Donetsk Region84306 Kramatorsk

9.00carbon MykolaivForgingsSUBSIDIARY ENTERPRISESUBSIDIARY ENTERPRISESUBSIDIARY ENTERPRISESUBSIDIARY ENTERPRISE9.00carbon-manganese

Tel: +38 0542 773 201 Email to: [email protected]

Includes steelmakingCertificate No.: MD00/4256/0001/3 Expiry Date: 17/11/2016

Sumy City40020

"DRILL COLLARS AND KELLYS PLANT"2, Komarova str.,

United KingdomUnited KingdomUnited KingdomUnited Kingdom

0.58carbon Newcastle upon TyneForgingsBARRETT STEEL ENERGY PRODUCTS - FORGE DIVISIONBARRETT STEEL ENERGY PRODUCTS - FORGE DIVISIONBARRETT STEEL ENERGY PRODUCTS - FORGE DIVISIONBARRETT STEEL ENERGY PRODUCTS - FORGE DIVISION0.58carbon-manganese0.58alloy0.58austenitic stainless

Tel: +44 (0)191 263 8686 Fax: +44 (0)191 262 6428 Email: mailto: [email protected] Web:http://www.bsep.comIncluding special stainless steel for approved applications.Certificate No. MD00/0946/0009/3 Expiry date: 29/03/2018

Wincomblee RoadLow WalkerNewcastle Upon Tyne NE6 3QQ

0.35carbon BirminghamForgingsBIFRANGI UK LIMITEDBIFRANGI UK LIMITEDBIFRANGI UK LIMITEDBIFRANGI UK LIMITED0.35carbon-manganese0.35alloy0.35austenitic stainless

Tel: +44 (0)1522 585814 Fax: +44 (0)1522 529116 email: [email protected] web: www.bifrangi.co.uk

Certificate No. MD00/1597/0007/3 Expiry date: 03/07/2017

Including crankshafts with K1 factor = 1.05 for approved applications

Tower WorksLincolnLN2 5DT

P.O. Box 22

2.00carbon Energy Coventry, UKForgingsFIRTH RIXSON FORGINGS LIMITEDFIRTH RIXSON FORGINGS LIMITEDFIRTH RIXSON FORGINGS LIMITEDFIRTH RIXSON FORGINGS LIMITED2.00carbon-manganese2.00alloy2.00austenitic stainless2.00duplex stainless*

* accepted for approved applicationsTel: +44 114 219 3314 EMail: mailto: [email protected] Web http://www.firthrixson.comCertificate #: MD00/0595/0009/3 Expiry date: 31/07/2018

WincobankSheffieldS9 1HD

Meadowhall and River Don SitesMeadowhall Road

2.00carbon BirminghamForgingsFIRTH RIXSON FORGINGS LIMITEDFIRTH RIXSON FORGINGS LIMITEDFIRTH RIXSON FORGINGS LIMITEDFIRTH RIXSON FORGINGS LIMITED2.00carbon-manganese2.00alloy2.00austenitic stainless

As at 22 December 2017 62Page

Page 63: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

Tel: +44 114 219 3626

E-mail: [email protected]

Website: www.arconic.com

Titanium and Nickel based alloys may be accepted for approved applications.

Certificate No. MD00/4502/0002/3 Expiry date: 09/03/2020

MatlockDerbyshire DE4 2JB

Darley Dale

8.00carbon BirminghamForgingsINDEPENDENT FORGINGS & ALLOYS LIMITEDINDEPENDENT FORGINGS & ALLOYS LIMITEDINDEPENDENT FORGINGS & ALLOYS LIMITEDINDEPENDENT FORGINGS & ALLOYS LIMITED8.00carbon-manganese8.00alloy8.00austenitic stainless

Tel: +44 114 229 2853 Fax: +44 114 234 0261 web: www.independentforgings.com

Certificate No. MD00/0738/0009/3 Expiry date: 24/01/2020

Victoria ForgeLivesey StreetSheffield S6 2BL

0.01carbon LiverpoolForgingsSDF AUTOMOTIVESDF AUTOMOTIVESDF AUTOMOTIVESDF AUTOMOTIVE

Approval covers manufacture of carbon steel spilt fracture connecting rod forgings. Approved applications only.

Tel: +44 (0) 1562 823451 Fax: +44 (0) 1562 754336

Website: www.sdf-auto.co.uk

Certificate No. MD00/4612/0001/3 Expiry Date: 17/09/2016

Stourport Road,Kidderminster.DY11 7QB

PO BOX 19

285.00carbon BirminghamForgingsSHEFFIELD FORGEMASTERS INTERNATIONAL LTD.SHEFFIELD FORGEMASTERS INTERNATIONAL LTD.SHEFFIELD FORGEMASTERS INTERNATIONAL LTD.SHEFFIELD FORGEMASTERS INTERNATIONAL LTD.285.00carbon-manganese285.00alloy50.00austenitic stainless

Tel: +44 (0)114 244 9071 Fax: +44 (0)114 251 9021 Email: [email protected]

Website: www.sheffieldforgemasters.com

Certificate No. MD00/0524/0009/3 Expiry date: 29/06/2020

Brightside LaneSheffield S9 2RW

P.O. Box 286

50.00carbon LiverpoolForgingsSOMERS FORGE Ltd.SOMERS FORGE Ltd.SOMERS FORGE Ltd.SOMERS FORGE Ltd.50.00carbon-manganese50.00alloy50.00austenitic stainless

Tel: +44 (0)121 585 5959 Email: mailto:[email protected] Web: http://www.somersforge.comCertificate No. MD00/1399/0008/3 Expiry date: 07/07/2020

HalesowenWest MidlandsB62 8DZ

Haywood ForgeProspect Road

United States of AmericaUnited States of AmericaUnited States of AmericaUnited States of America

0.20alloy ChicagoForgingsCANTON DROP FORGECANTON DROP FORGECANTON DROP FORGECANTON DROP FORGE

Tel: +1 330 477 4511 Fax: +1 330 477 2046email: [email protected] web: www.cantondropforge.com

Approval is for closed die forged gear blanks supplied in normalised condition intended for further heat treatment.

Certificate No: MD00/4664/0001/3 Expiry Date: 21/02/2020

4575 Southway St, S.W.,Canton,Ohio 44706

As at 22 December 2017 63Page

Page 64: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

20.00carbon ChicagoForgingsELLWOOD CITY FORGEELLWOOD CITY FORGEELLWOOD CITY FORGEELLWOOD CITY FORGE20.00carbon-manganese20.00alloy

Tel: 1800 843 0166 Ext 3112 and +1 724 752 0055 Fax: +1 724 752 3409

E-mail: [email protected]

Website: www.ellwoodcityforge.com

Materials Quality Scheme Approved - Approval No. MQS 050

Certificate No. MD00/3568/0004/3 Expiry date: 30/05/2019

PO Box 31Ellwood CityPA16117

800 Commercial Ave

7.00carbon ChicagoForgingsELLWOOD NATIONAL CRANKSHAFTELLWOOD NATIONAL CRANKSHAFTELLWOOD NATIONAL CRANKSHAFTELLWOOD NATIONAL CRANKSHAFT7.00carbon-manganese7.00alloy

Tel: +1 814 563 8730 Fax: +1 814 563 6321 Email; mailto:[email protected]

Approval also includes Ellwood Crankshaft and Machine Co. 2727 Freedland Road, Hermitage, PA. USA

Materials Quality Scheme Approved - Approval No. MQS 043Certificate No. MD00/1067/0010/3 Expiry date: 06/06/2017

One Front StreetIrvine, PA 16329

3.30alloy ChicagoForgingsFIBA TECHNOLOGIES INC.FIBA TECHNOLOGIES INC.FIBA TECHNOLOGIES INC.FIBA TECHNOLOGIES INC.

Tel: +1 508 887 7100 Fax: +1 508 754 2254email: [email protected] web: www.fiba.com

Certificate No.: MD00/4295/0002/3 Expiry Date: 02/03/2017

Approved for quench and tempered seamless pressure vessels manufactured by pipe spinning process to the requirements of AD2000.

Approval includes pipe spinning process carried out at FIBA Technologies Inc. 53 Ayer Road, Littleton MA. 01460. USA.

Maximum approved dimensions = 610mm o/d x 21mm w/t.

1535 Grafton Road,Millbury,MA 01527,

20.00carbon ChicagoForgingsSCOT FORGESCOT FORGESCOT FORGESCOT FORGE20.00carbon-manganese20.00alloy

Tel: +1 815 675 4281 Fax: +1 847 587 2000Contact: Steve HughesEmail: [email protected] Web: http://www.scotforge.comCertificate #: MD00/1330/0008/3 Expiry date: 06/05/2020

Spring GroveIllinois 60081

Spring Grove Works8001 Winn Road

17.00carbon ChicagoForgingsSCOT FORGESCOT FORGESCOT FORGESCOT FORGE17.00carbon-manganese17.00alloy

Tel: +1 815 675 4281 Fax: +1 847 587 2000Contact: Steve HughesEmail: [email protected] Web: http://www.scotforge.comCertificate No. MD00/1331/0008/3 Expiry date: 06/05/2020

105 Scot DriveClintonWisconsin 53525

Clinton Works

1.50carbon ChicagoForgingsSCOT FORGESCOT FORGESCOT FORGESCOT FORGE1.50carbon-manganese1.50alloy

Tel: +1-800-435-6621 Fax: +1 847-587-2000 Email: mailto: [email protected] Web: http://www.scotforge.comCertificate #: MD00/1961/0008/3 Expiry date: 22/05/2019

9394 West Belmont Ave.Franklin ParkIlinois 60131

Franklin Park Works

As at 22 December 2017 64Page

Page 65: List 3 Approved Manufacturers of Steel Forgings

© Lloyd’s Register Group Limited 2017. All rights reserved.

OfficeOfficeOfficeOfficeName and AddressName and AddressName and AddressName and Address GradeGradeGradeGradeCategoryCategoryCategoryCategory

List 3List 3List 3List 3Approved ManufacturersApproved ManufacturersApproved ManufacturersApproved Manufacturers

of Steel Forgingsof Steel Forgingsof Steel Forgingsof Steel Forgings

Max Weight TonnesMax Weight TonnesMax Weight TonnesMax Weight Tonnes

0.29carbon ChicagoForgingsTHYSSENKRUPP CRANKSHAFT COMPANYTHYSSENKRUPP CRANKSHAFT COMPANYTHYSSENKRUPP CRANKSHAFT COMPANYTHYSSENKRUPP CRANKSHAFT COMPANY0.29carbon-manganese

Tel: +1 217444 5326email: [email protected]: www.thyssenkrupp.comCertificate No. MD00/0902/0009/3 Expiry date: 12/06/2020

P.O. Box 214DanvilleIllinois 61832

Danville Forging Division1000 Lynch Spur Road

VietnamVietnamVietnamVietnam

0.10carbon Hai PhongForgingsFELIX METAL TECH CO., LTDFELIX METAL TECH CO., LTDFELIX METAL TECH CO., LTDFELIX METAL TECH CO., LTD0.10carbon-manganese0.10austenitic stainless

Tel: +84 31 3692 194 Fax: +84 31 3692 193email: [email protected] web: www.fete.co.krCertificate No: MD00/4539/0001/3 Expiry date: 03/01/2019

Luu Kiem Commune,Thuy Nguyen Dist,Hai Phong

Bac Hamlet,

As at 22 December 2017 65Page