Linux+ Guide to Linux Certification, Third Edition Chapter 11 Compression, System Backup, and Software Installation.

  • Published on
    22-Dec-2015

  • View
    213

  • Download
    0

Embed Size (px)

Transcript

<ul><li> Slide 1 </li> <li> Linux+ Guide to Linux Certification, Third Edition Chapter 11 Compression, System Backup, and Software Installation </li> <li> Slide 2 </li> <li> Linux+ Guide to Linux Certification, 3e2 Objectives Outline the features of common compression utilities Compress and decompress files using common compression utilities Perform system backups using the tar, cpio, and dump commands View and extract archives using the tar, cpio, and restore commands </li> <li> Slide 3 </li> <li> Linux+ Guide to Linux Certification, 3e3 Objectives (continued) Use burning software to back up files to CD and DVD Describe common types of Linux software Compile and install software packages from source code Use the Red Hat Package Manager to install, manage, and remove software packages Use the yum command to obtain software from Internet software repositories </li> <li> Slide 4 </li> <li> Compression Compression: process in which files are reduced in size by stripping out characters Compression algorithm: standard set of instructions used to compress a file Compression ratio: percentage by which the file size was decreased Common compression utilities include compress, gzip, and bzip2 Linux+ Guide to Linux Certification, 3e4 </li> <li> Slide 5 </li> <li> The compress Utility Use to compress files using the Adaptive Lempel Ziv coding (LZW) compression algorithm Average compression ratio of 40-50% compress command: used to compress files zcat command: used to display the contents of an archive created with compress Can use zmore and zless commands to view contents page-by-page uncompress command: used to decompress files compressed by compress command Linux+ Guide to Linux Certification, 3e5 </li> <li> Slide 6 </li> <li> 6 The compress Utility (continued) Table 11-1: Common options used with the compress utility </li> <li> Slide 7 </li> <li> Linux+ Guide to Linux Certification, 3e7 The gzip Utility GNU zip (gzip): used to compress files using the Lempel-Ziv compression algorithm (LZ77) Varies slightly from algorithm used by compress Average compression ratio of 60-70% Uses.gz filename extension by default Can control level of compression via numeric option gunzip command: used to decompress.gz files </li> <li> Slide 8 </li> <li> Linux+ Guide to Linux Certification, 3e8 The gzip Utility (continued) Table 11-2: Common options used with the gzip utility </li> <li> Slide 9 </li> <li> Linux+ Guide to Linux Certification, 3e9 The gzip Utility (continued) Table 11-2 (continued): Common options used with the gzip utility </li> <li> Slide 10 </li> <li> Linux+ Guide to Linux Certification, 3e10 The gzip Utility (continued) Table 11-2 (continued): Common options used with the gzip utility </li> <li> Slide 11 </li> <li> Linux+ Guide to Linux Certification, 3e11 The bzip2 Utility bzip2 command: used to compress files using Burrows-Wheeler Block Sorting Huffman Coding compression algorithm Cannot compress directory full of files Cannot use zcat and zmore to view files Must use bzcat command Compression ratio is 50% to 75% on average Uses.bz2 filename extension by default bunzip2 command: used to decompress files compressed via bzip2 </li> <li> Slide 12 </li> <li> Linux+ Guide to Linux Certification, 3e12 The bzip2 Utility (continued) Table 11-3: Common options used with the bzip2 utility </li> <li> Slide 13 </li> <li> Linux+ Guide to Linux Certification, 3e13 The bzip2 Utility (continued) Table 11-3 (continued): Common options used with the bzip2 utility </li> <li> Slide 14 </li> <li> Linux+ Guide to Linux Certification, 3e14 System Backup System backup: process whereby files are copied to an archive Archive: location (file or device) that contains copy of files Typically created by a backup utility Should backup user files from home directories and any important system configuration files Possibly files used by system services as well Several backup utilities available tar, cpio, dump/restore, burning software </li> <li> Slide 15 </li> <li> Linux+ Guide to Linux Certification, 3e15 System Backup (continued) Table 11-4: Common tape device files </li> <li> Slide 16 </li> <li> Linux+ Guide to Linux Certification, 3e16 The tar Utility Tape archive (tar) utility: one of oldest and most common backup utilities Can create archive in a file on a filesystem or directly on a device tar command: activates tar utility Arguments list the files to place in the archive Accepts options to determine location of archive and action to perform on archive </li> <li> Slide 17 </li> <li> Linux+ Guide to Linux Certification, 3e17 The tar Utility (continued) Table 11-5: Common options used with the tar utility </li> <li> Slide 18 </li> <li> Linux+ Guide to Linux Certification, 3e18 The tar Utility (continued) Table 11-5 (continued): Common options used with the tar utility </li> <li> Slide 19 </li> <li> Linux+ Guide to Linux Certification, 3e19 The tar Utility (continued) tar utility does not compress files inside archive Time needed to transfer archive across a network is high Can compress archive Backing up files to compressed archive on a filesystem is useful when transferring data across a network Use options of the tar command to compress an archive immediately after creation </li> <li> Slide 20 </li> <li> Linux+ Guide to Linux Certification, 3e20 The cpio Utility Copy in/out (cpio): common backup utility Activated by the cpio command Has various options Includes options similar to tar utility Has added features Ability to back up device files Long filenames Uses absolute pathnames by default when archiving </li> <li> Slide 21 </li> <li> Linux+ Guide to Linux Certification, 3e21 The cpio Utility (continued) Table 11-6: Common options used with the cpio command </li> <li> Slide 22 </li> <li> Linux+ Guide to Linux Certification, 3e22 The cpio Utility (continued) Table 11-6 (continued): Common options used with the cpio command </li> <li> Slide 23 </li> <li> Linux+ Guide to Linux Certification, 3e23 The dump/restore Utility dump/restore: Used to back up files and directories to device or file on filesystem Works only with files on ext2 and ext3 filesystems Designed to backup entire filesystems to an archive /etc/dumpdates: file used to store information about incremental and full backups </li> <li> Slide 24 </li> <li> Linux+ Guide to Linux Certification, 3e24 The dump/restore Utility (continued) Full backup: archiving all data on filesystem Incremental backup: backs up only data that has changed since last backup Can perform up to nine different incremental backups dump command: create archives for full or incremental backup restore command: extract archives created with dump </li> <li> Slide 25 </li> <li> Linux+ Guide to Linux Certification, 3e25 The dump/restore Utility (continued) Figure 11-1: A sample back-up strategy </li> <li> Slide 26 </li> <li> Linux+ Guide to Linux Certification, 3e26 The dump/restore Utility (continued) Table 11-7: Common options used with the dump/restore utility </li> <li> Slide 27 </li> <li> Linux+ Guide to Linux Certification, 3e27 Burning Software tar, cpio, and dump utilities copy data to backup medium in character-by-character or block-by-block format Typically used with tape, floppy, and hard disk media Disc burning software: used to write files to CD or DVD media Build CD or DVD filesystem, organize the data, and write it all to CD or DVD Fedora 13 comes with Brasero Disc Burner burning software </li> <li> Slide 28 </li> <li> Linux+ Guide to Linux Certification, 3e28 Burning Software (continued) Figure 11-2: The Brasero Disc Burner program </li> <li> Slide 29 </li> <li> Linux+ Guide to Linux Certification, 3e29 Software Installation Software for Linux can consist of: Binary files precompiled to run on certain hardware architectures Source code, which must be compiled before use Typically distributed in tarball format Package manager: system that defines standard package format Used to install, query, and remove packages Red Hat Package Manager (RPM): most common package manager used by Linux systems today </li> <li> Slide 30 </li> <li> Linux+ Guide to Linux Certification, 3e30 Compiling Source Code into Programs Procedure for compiling source code into binary programs standardized among most OSS developers make command: looks for Makefile and it to compile the source code into binary using compiler Makefile: contains most of the information and commands necessary to compile a program, as well as instructions for use of commented areas make install command: copies complied executable programs to correct location </li> <li> Slide 31 </li> <li> Linux+ Guide to Linux Certification, 3e31 Compiling Source Code into Programs (continued) Figure 11-3: The rdesktop program </li> <li> Slide 32 </li> <li> Linux+ Guide to Linux Certification, 3e32 Installing Programs Using RPM Packages in RPM format have filenames that indicate hardware architecture for which the software was compiled End with.rpm extension To install an RPM package, use i option to rpm command Command used to install, query, and remove RPM packages </li> <li> Slide 33 </li> <li> Linux+ Guide to Linux Certification, 3e33 Installing Programs Using RPM (continued) After installation RPM database is updated to contain information about the installed package and files contained in it -q option: query the full package name -i option: together with q used to display full package information -f option: together with q used to display the package to which a specific file belongs - e option: used to remove a package from the system </li> <li> Slide 34 </li> <li> Linux+ Guide to Linux Certification, 3e34 Installing Programs Using RPM (continued) Figure 11-4: The bluefish program </li> <li> Slide 35 </li> <li> Linux+ Guide to Linux Certification, 3e35 Installing Programs Using RPM (continued) Table 11-8: Common options used with the rpm utility </li> <li> Slide 36 </li> <li> Linux+ Guide to Linux Certification, 3e36 Installing Programs Using RPM (continued) Table 11-8 (continued): Common options used with the rpm utility </li> <li> Slide 37 </li> <li> Linux+ Guide to Linux Certification, 3e37 Installing Programs Using RPM (continued) Most RPM packages are located on Internet Servers Called software repositories yum command: used to search Internet software repositories for RPM packages Installs dependent packages if necessary yum install packagename command yum update packagename command KPackageKit: graphical utility for installing or updating packages </li> <li> Slide 38 </li> <li> Linux+ Guide to Linux Certification, 3e38 Installing Programs Using RPM (continued) Figure 11-5: The KPackageKit utility </li> <li> Slide 39 </li> <li> Linux+ Guide to Linux Certification, 3e39 Summary Many compression utilities are available for Linux systems; each uses a different compression algorithm and produces a different compression ratio Files can be backed up to an archive using a backup utility To back up files to CD-RW or DVD-RW, use burning software instead of a backup utility </li> <li> Slide 40 </li> <li> Linux+ Guide to Linux Certification, 3e40 Summary (continued) tar is the most common backup utility used today Typically used to create compressed archives called tarballs Source code for Linux software can be obtained and compiled afterward using the GNU C Compiler Most source code is available in tarball format via the Internet </li> <li> Slide 41 </li> <li> Linux+ Guide to Linux Certification, 3e41 Summary (continued) Package Managers install and manage compiled software of the same format The Red Hat Package Manager is the most common package manager available for Linux systems today You can install or upgrade RPM packages using the yum command yum command obtains RPM packages from software repositories on the Internet </li> </ul>

Recommended

View more >