LINEAR ACTUATORSType SL 95 / SL 80 / KL 95up to 12,000 N with high protection class (IP)

2

moving l i f t p o s i t i o n

As one of the leading manufacturers of electricaland electronic drive components and systems weoffer you a wide product range for almost everyindustrial application in many different branches ofindustry.

Innovative products and our sound technical competence have made us a reliable partner formore than 50 years. We understand our customers’problems and find individual solutions.

KL 95 linear actuator Page 10

Accessories andsafety from page13 onwards

SL 95 linear actuator Page 4

SL 80 linear actuator Page 7

3

ideas

un ive rsa l and power fu lLinear actuators for applications withhigh protection class

The encapsulated linear actuators of the SL 95, SL 80 and KL 95 seriesare mainly distinguished by their compact and rugged design, the strokelengths and traversing speeds individually adapted to an applicationand their powerful and low-noise operation.

The actuators are suitable for operation in humid environments andhigh-safety applications because of their encapsulated design in protection class 2.

HANNING linear actuators are absolutely maintenance free and theirreliability is well established. They offer the highest operating safetypossible.

m o v e c o n t r o l

moving ideas – With this slogan we present ourselves on the market. It represents our aim todevelop and produce modern and economic drivesolutions for our customers.

Our experience and orientation towards the futureprovide the foundations for our ambitious strategies.From our manufacturing sites in Germany as well asour international sales offices we deliver HANNINGproducts and service to successful companies allover the world.

SL 95 linear actuators

Features

• Powerful single-phase AC motors, three-phase AC motors orlow-voltage three-phase drives (DC-FI)

• Almost constant traversing speed during load changing operation• Windings adapted for the application with HANNING frequency

inverters• Operation with ambient temperatures between -20 and +50 °C• Individual stroke lengths adapted to the application• Individual control possibilities• End position switch-off through internal micro-switch• Certified according to DIN EN 60601, UL 60601, CSA 60601

Powerful and quick

The range of HANNING encapsulated linear actuators is headed bythe SL 95. It enables pressure and tension up to 12,000 N and traversing speeds up to 42 mm/s or 50 mm/s which almost remainconstant even at rated load.

The SL 95 linear actuators are ideal drives for a powerful and safeadjustment of therapy tables and many more medical and industrialapplications. The reliable and rugged linear actuators can be adaptedto the requirements regarding traversing speed and accuracy of position. Different stroke lengths are possible. They can be individually controlled by either the patented HANNING pneumatic control or electrically.

As option, the linear actuators are also available with a declutchsystem. The power transmission can be interrupted in one directionso that the traversing in is only caused by the weight which is loaded on the drive.The declutching is achieved by a special bearing which ensures thepower transmission between worm and motor shaft.

The linear actuators of these series are also available as low-voltagethree-phase AC system with frequency inverter (DC-FI system).Please ask for our DC-FI broschure.

Equipment at a glance

• HALL IC to detect a position at 1325 to 2650 pulses per minute at rated motor speed

• High-efficiency plastic gear or antilock bronze gear• Travel tube in nickel-plated St37 steel, V2A or aluminum • Declutching function• In low-voltage applications the SL 95 can be used as master for up

to three slave drives

SL 95 linear actuator

4

Technical data for SL 95

SL 95

Mains voltage 1~ 100 / 115 / 230 V AC ± 10 % 3~ 400 V

Max. load 12,000 N (industrial application) or 10,000 N (medical application)

Stroke length up to 500 mm, over 500 mm on request

Class of protection 1 or 2

Type of protection IP00 to IP55

Duty time 25 s on / 400 s off

Control • pneumatically• electrically• via HANNING universal control units• via HANNING frequency inverters• via low-voltage switching elements

End position limitation • End position limitation through internal micro-switch• Optionally the end positions can be externally limited by micro switches

Position detection • Hall sensor

Safety options • Declutching in downwards direction, special declutch bearing• HANNING safety-lock-box

5

Force-speed diagram

400 V 3-phase 50 / 60 Hz

14 17 21 25 28 33 42 50 63 75

kN

121110987654321

100 / 115 / 230 V single phase 50 / 60 Hz

7 11 14 28 42 638 13 16 33 50 75

kN

121110987654321

mm/s

mm/s

50 Hz

60 Hz

50 Hz

60 Hz

Dimension sheet for SL 95

6

SL 95

z = Overlapping depends on load and stroke length

H = Horizontal fork joint position, turned by 90°

V = Vertical fork joint position, as shown

SL 80 linear actuators

7

Features

• Powerful single-phase AC motors or low-voltage three-phase drives(DC-FI)

• Almost constant traversing speed during load changing operation• Windings adapted for the application with HANNING frequency

inverters• Compact design thanks to an endshield housing with integrated

worm gear• Operation with ambient temperatures between -20 and +50 °C• Individual stroke lengths adapted to the application• Individual control possibilities• End position switch-off through internal micro-switch• Certified according to DIN EN 60601, UL 60601, CSA 60601

Universal and compact

The new SL 80 is very powerful and covers up to 8,000 N. Many newapplications are possible. Its newly developed housing with integrated endshield ensures a very compact design. The SL 80 isnow also suitable for smaller mounting spaces. The very ruggedmotors enable almost a load-constant speed up to 15 mm/s.

As option, the SL 80 is also available with a declutch system. Thepower transmission can be interrupted in one direction so that thetraversing in is only caused by the weight which is loaded on the drive.The declutching is achieved by interrupting the power transmissionbetween screw nut and travel tube.

HANNING’s engineering department offers the development andimplementation of individual solutions. Together with the customerwe define the drive requirements regarding power, traversing speedand accuracy of position and adapt the drive accordingly.

The linear actuators of these series are also available as low-voltagethree-phase AC system with frequency inverter (DC-FI system).Please ask for our DC-FI broschure.

Equipment at a glance

• HALL IC to detect a position at 1325 to 2650 pulses per minute at rated motor speed

• High-efficiency plastic gear• Aluminum travel tube • Declutching function• If controlled through low-voltage switching elements, the SL 80 can

be used as master for up to three slave drives

SL 80 linear actuator

8

Technical data for SL 80

Force-speed diagram

SL 80

Mains voltage 1~ 100 / 115 / 230 V AC ± 10 %

Stroke length up to 300 mm, over 300 mm on request

Class of protection 1 or 2

Type of protection IP00 to IP55

Duty time 25 s on / 400 s off

Control • pneumatically• electrically• via standard PLC• via HANNING universal control units• via low-voltage switching elements

End position limitation • End position limitation through internal micro-switch• Optionally the end positions can be externally limited by micro switches

Position detection • Hall sensor

Safety options • Declutching in downwards direction, motor disengaged• HANNING safety-lock-box

SL 80 big version (EB 50) – 100 / 115 / 230 V single-phase 50 / 60 Hz

6 10 15

5

6

7

8

4

3

2

1

7 12 18

kN

mm/s

50 Hz

60 Hz

9

Dimension sheet for SL 80

SL 80

H = Horizontal fork joint position, turned by 90°

V = Vertical fork joint position, as shown

Fork joint optionSL 80 dimension a

10

KL 95 linear actuators

Features

• Powerful single-phase AC motors or low-voltage three-phase drives(DC-FI)

• Almost constant traversing speed during load changing operation• Operation with ambient temperatures between -20 and +50 °C• Individual stroke lengths adapted to the application• Individual control possibilities• Mechanical end position switch-off • Certified according to DIN EN 60601, UL 60601, CSA 60601

Small and individual

The KL 95 is the smallest linear actuator of this series. Nevertheless it is as rugged as all the other drives. It is suitable for applications upto 4,000 N and traversing speeds of 18 mm/s.

As option, the KL 95 is also available with a declutch system. Thepower transmission can be interrupted in one direction so that thetraversing in is only caused by the weight which is loaded on thedrive.The declutching is achieved by interrupting the power transmissionbetween screw nut and travel tube.

Of course, the linear actuators can be adapted to your individualapplication regarding power, traversing speed and accuracy of position.

The linear actuators of these series are also available as low-voltagethree-phase AC system with frequency inverter (DC-FI system).Please ask for our DC-FI broschure.

Equipment at a glance

• HALL IC to detect a position at 1325 to 2650 pulses per minute at rated motor speed

• High-efficiency plastic gear• Declutching function• Aluminum travel tube • Low-voltage hand switch only with SL 80 / SL 95 masters

KL 95 linear actuator

11

Technical data for KL 95

KL 95

Mains voltage 1~ 100 / 115 / 230 V AC ± 10 %

Stroke length up to 300 mm, over 300 mm on request

Class of protection 1 or 2

Type of protection IP00 to IP55

Duty time 25 s on / 400 s off

Control • pneumatically• electrically• via standard PLC• via HANNING universal control units• low-voltage switching elements through SL 80 / SL 95 masters

End position limitation • Mechanical end position limitation• Optionally the end positions can be externally limited by micro switches

Position detection • Hall sensor

Safety options • Declutching in downwards direction, motor disengaged• HANNING safety-lock-box

100 / 115 / 230 V single-phase 50 / 60 Hz

Force-speed diagrams

6 10 157 12 18

kN

4

3

2

1

mm/s

50 Hz

60 Hz

12

Dimension sheet for KL 95

KL 95

H = Horizontal fork joint position, turned by 90°

V = Vertical fork joint position, as shown

Fork joint optionKL 95 dimension a

13

Accessories

To complete the drive system, HANNING offers an extensive range of accessories including different control variants, hand and foot switches.

A drive can either be controlled through a HANNING pneumatic handor foot switch or an electrical hand or foot switch in low-voltagetechnology.

Furthermore it is possible to control a drive with an infra-red remotecontrol and the CTRL universal control unit. This system includes acomfortable memory function which finds programmed positionsdirectly. The switch design and the control type can be selected asdesired.

Control units

HANNING offers various control units for linear actuator. You canchoose between the patented pneumatic hand and foot switches and the low-voltage hand and foot switches.

Pneumatic control elements:• Hand switch• Foot switch • Stop button (external limit switch)

Low-voltage control elements:• Hand switch• Foot switch• Limit switch• Infra-red remote control together with

HANNING universal control unit CTRL

Accessories

Voltage supply

• 100 / 115 / 230 V AC

Motor control

• 4 x 0.5 kW single phase• Connection of up to four motors possible• Connection of up to three motors and two

switching outputs possible• Programming of up to eight memory positions

possible• Last-position function• Auto-correction / virtual limit switch• Two different standard software solutions

Safety options

• Enable input• Safety switch-off

Error diagnostics

Control

• 5 V DC• Analog keyboard• Infra-red interface RECS80• Coded signal cable RECS80• Bus interface (in preparation)

HANNING’s frameless universal control unit is suitable for applicationsin very small mounting spaces and offers the user many control andsafety options. All HANNNG linear actuators can be equipped withthis type of control unit.

14

HANNING universal control unit CTRL

CTRL

15

Safety

Pneumatic stop-buttonThe pneumatic stop-button can be used as external limit switch (at zero current).

Declutching systemAs option, HANNING linear actuators are also available with declutching, i.e. the power transmission can be interrupted in onedirection so that the traversing in, for instance, the ingoing direction is only caused by the weight which is loaded on the drive.The declutching is achieved by a special bearing which transmits thepower between worm and motor shaft or interrupts the power transmission between screw nut and travel tube.

Medical applications require a very high safety standard. HANNINGlinear actuators are equipped with different active and passive safetydevices which ensure that they can be safely and perfectly integratedinto our customers’ applications.

In addition to the safety options directly integrated into the motor as declutching functions, HANNING offers you a safety-lock-box.

Our safety devices ensure a very high safety standard for our customers’ applications.

Our products are certified and approved by all common standardsand regulations to ensure trouble-free operation in medical applications.

Active safety devices

16

Safety-lock-boxThe HANNING safety-lock-box meets all regulations of the BfArM(German Institute for medical Products). It interrupts the power supply of HANNING drives even before the motor so that improperhandling becomes impossible.

Passive safety devices

Pneumatic controlAbout 30 years ago HANNING patented this pneumatic control whichenables the control of linear actuators at zero current. The operatordoes not have to touch any live components and its rugged designensures highest reliability.

HANNING is presently developing an innovative drive system whichoperates at variable speed and offers interesting performance features.

This low-voltage three-phase AC motor can be driven by a transformeror a common lead-gel battery which makes it appropriate for mobileapplications.

The current consumption could be considerably reduced so that thedrive is absolutely suitable for constant operation even when beingused with batteries.

HANNING’s brushless DC system is an alternative to a standard DCdrive and avoids all known disadvantages.

Safety

I nnovat ion

17

Planned application:

Voltage: V Hz

Pressure: N

Tension: N

Stroke length: mm

Maximum static load: N

Velocity: mm/s

Duty time: %

Ambient temperature: between ºC

Class of protection: � I = grounded � II = double insulation

Type of protection: IP x

Humidity: %

Weather conditions / chemicals:

Max. Dimensions / mounting depth: mm

Max. coasting mm

Mounting position: � � � � �

Standards: � UL � CSA � others: ⌧

Axial / lateral force: � Yes � No

Previous solution:

Requested amount per year: pieces

Estimated price: € / piece

Type proposal:

Fax enquiry:+49 (5202) 707 303

Linear actuator questionnaire

Company address:

Telephone:

Email:

Contact:

Please

� Send an offer

� Send a sample device

� Give us a call

� Visit us

� Send information material about all HANNING products

18

Standard is not enough

a d v i s e c h e c k o p t i m i

service • Interdisciplinary development

(motor + electronics + software)• Analysis of the drive problem• Planning in close co-operation with our customer• Application and customer-specific drive solutions,

individual mechanical solutions• Cost-optimised drive concepts• Customer-contact and co-operation over several

device generations• After-sales-service• High manufacturing depth• Measuring laboratory, continuous test facilities• State-of-the-art electronic manufacturing site

(SMD, hybrid technology)• Handling and support with national and

international approvals and certifications• Certified according to DIN EN ISO 9001:2000,

DIN EN ISO 14001:2005• Extensive knowledge of different branches of

industry

HANNING’s engineering department offers the deve-lopment and implementation of individual solutions.Together with the customer we define the driverequirements regarding power, traversing speed andaccuracy of position and adapt the drive accordingly.Technical details such as phase adaptation to reducethe noise generation are defined and integrated intoour customers’ individual solutions.

The experience we have gained over more than fivedecades have made us a reliable partner for ourcustomers.

HANNING products can be found in many differentbranches of industry: drives for mechanical engineering, blowers for food-processing machinery,drain pumps for washing machines and dishwashersas well as linear actuators for versatile applications.

HANNING’s philosophy is to develop and producemodern and economic drive solutions in close co-operation with our customers.

From analysis of the drive problem and finding acustom-built solution to after-sales-service – you canrely on us!

19

s e m e a s u r e s u p p o r t

& more

Printed in Germany · Subject to technical alterations · SL 95 / SL 80 / KL 95 /E/09.09/PDF

HANNING ELEKTRO-WERKE GmbH & Co. KGHolter Straße 90, D-33813 OerlinghausenPostfach 1361, D-33806 Oerlinghausen

Tel +49 (5202) 707-0 · Fax +49 (5202) 707-301info@hanning-hew.com · www.hanning-hew.com