Upload
others
View
76
Download
1
Embed Size (px)
Citation preview
Lily Pad Chipper
OverviewApplications
The Kadant Carmanah Lily Pad Chipper is designed to achieve high chip recovery when processing log ends where the diameter is greater than the overall length - this material is also known to some as lily-pads.
Features
u Inclined Drum u Strong, rigid steel fabrication uChipping is substantially parallel to the grain u 3 edge knife cuts chip cleanly on all 4 surfaces
Benefits
u Provides stable position for lily pads to be processed uDesigned to last u Less HP required than disc chippers or knife hogs uNo Chip bruising
The drum and spout assemblies of the Kadant Carmanah Lily Pad Chipper are inclined 30 degrees toward the infeed flow. Incoming lily pads, laying flat on the infeed conveyor, ride over the conveyor end and slide down the inclined inside wall of the hopper. This orientation provides a stable position for the chipping to begin which yields high recovery rates from lily pads.
Knife Grinding Fixture Supplied with Lily pad Chipper
The Kadant Carmanah Lily Pad Chipper utilizes many small individual knives arranged in a spiral around the drum surface. The knife cutting edge is basically parallel to the wood grain similar to the cutting done by a veneer lathe. With this type of cut, the energy required to produce a given volume of chips is up to one half of what is normally required by conventional disc chippers. Further, cutting parallel to the grain results in lower chipper noise level.
LILY PAD CHIPPER
Kadant is a leading global supplier of products and services that improve productivity and quality in paper production and other process industries. For the nearest location and contact, visit our Website.
www.kadantcarmanah.com
Contact us:
KADANT CARMANAHUnit #8 - 15050 - 54A AvenueSurrey, BC Canada V3S 5X7
Tel: 604-299-3431Fax: 604-299-1310Email: [email protected]
Lily Pad Chipper-1000 08/2014
© 2014 Kadant Inc.
Model Drum Dia RPM
No. of KnivesSingle Spiral
Normal Average Capacity - m3/hr
(SWE)
Normal Power Required h.p. (kw)
wk2 / gd2lb-ft2
(kg-m2)Weight - lbs (kg)
0.75” (19mm)
Chip
1” (25.5mm)
Chip
Soft Wood
Hard wood
Max.
38x1-8(965x500)
38 (965)
335 27 20 1060
(45)75
(55)100(75)
4,400 (740)
4800 (2,175)
38x2-6(965x760)
38 (965)
335 41 30 15100(75)
125(90)
150(110)
6,600(1,100)
7,000(3,175)
55x2-3(1400x680)
54 (1372)
280 36 27 16125(90)
150(110)
200(150)
22,000(3,700)
11,000(5,000)
55x3-6(1400x1060)
54 (1372)
280 56 42 25150
(110)200
(150)250
(185)26,900(4,500)
16,000(7,250)
72x3-6(1830x1060)
72 (1830)
240 56 42 32200
(150)250
(185)300
(225)50,000(8,400)
23,000(10,425)
Note: Capacity and power figures are guidelines only. Please consult Kadant Carmanah Design for accurate and site-specific figures.
Unique, 3-edged knife yields a clean cut chip on all 4 edges.