LigoPTP Rapidfire - Streakwave · PDF fileCopyright ©2015 LigoWave 7 km LigoPTP Rapidfire 5-23 test over city center Test reports . Copyright ©2015 LigoWave 7 km LigoPTP Rapidfire

LigoPTP Rapidfire

Copyright ©2015 LigoWave

Copyright ©2015 LigoWave Copyright ©2015 LigoWave

LigoPTP Rapidfire 5-23/ 5-N

• 1.2 GHz dedicated Marvel Armada

CPU

• 750 Mbps (2x2)

• 250k PPS rate

• Integrated 2.4 GHz radio for

management

• 2 x 1000 BaseT Ethernet ports

(802.3 at/af compatible) with PoE

passthrough

• 23 dBi (2x2) integrated antenna or

external N connectors


Integrated 2.4 GHz radio:

• Allows accessing LigoPTP devices from the distance

• Simplifies the installation of the link:

• HTML 5 based GUI plays sound

• Link configuration and testing can be performed onsite



2.4 GHz radio test


2.4 GHz radio test


2 x Gigabit Ethernet ports:

• With a real PoE passthrough (802.3 at/af)

• Ideal for repeater and video surveillance scenarios

• Simplifies building 1+1 links



New enclosure design

Copyright ©2015 LigoWave Copyright ©2015 LigoWave

RGB LEDs with reset button

• LEDs indicate device status:

• Booting up/ rebooting

• Firmware upgrading

• Reseting to defaults

• Recovery mode

• When operating a link:

• Ethernet port status and speed

• Signal level in 1 dBm step

• 2.4 GHz radio activity



45 degree

antenna rotation


Gore membrane vent


Solid mounting bracket


Detachable handle



Integrated surge protection:

• Designed according to IEC standards:

• ESD: EN 6100-4-2, Class 4, 8 kV line to ground

and 4 kV line to line discharge

• Tested: 15 kV line to ground and 8 kV line to line discharge

• Surge: EN 6100-4-5, Class 4, 4 kV line to ground,

2 kV line line to line discharge

• Tested: 6 kV line to ground and 2 kV line to line discharge



New OS

HTML 5 responsive design


Link setup wizard

• Wizard speeds up and simplifies wireless link installation procedure

• It is enough to configure one master device

(slave device just plug the power in)

• Slave devices can be found via wired or wireless connection

• Wizard asks to input few mandatory parameters and lets finish link

setup in a few clicks


Link setup wizard


Link setup wizard


Link setup wizard


Single side configuration


Global parameters:

• Link ID

• Channel (frequency)

• Channel size

• System password

Individual parameters

(configurable from master):

• Friendly name

• Location name

• Contact person

• Coordinates

• TX power

• ATPC

• Max data rate

• Data rate algorithm

(static or dynamic)

• IP address

Single side configuration


Easy pre-configuration

Wired Wireless


Spectrum analyser

• Demonstrates noise floor

• Local and remote side information shown in a single location (GUI)

• Historical 24 hour spectrum data is collected on the device (until reboot)


Improved security

• LigoWave cares about your data security

• Wireless is one of the most popular areas for data sniffing

• RapidFire PTP link is always encrypted (AES-128)

• Administrator doesn't need to input wireless password separately -

link password is generated from system/GUI password automatically

• For GUI access we also recommend to use HTTPS,

for console - SSH


Wire speed QoS

• Hardware based - no extra load on a CPU

• 4 priority queues for different traffic types

• Strict and weighted round robin policies for data transmission

• Packet prioritisation by VLAN/CoS (L2) and IP/ToS/DSCP (L3) marks


7 km LigoPTP Rapidfire 5-23 test over city center

Test reports



Test reports

Local side

Remote side




Test reports


THANK YOU

Documents

LigoPTP Rapidfire - Streakwave · PDF fileCopyright ©2015 LigoWave 7 km LigoPTP Rapidfire 5-23 test over city center Test reports . Copyright ©2015 LigoWave 7 km LigoPTP Rapidfire