Lighting Transformers - Jendee Trading Ltd | UK … with fitting instructions Twist & Lock Lamp retaining system Pressed Steel & Diecast Single Clam Pack Kit for Low Voltage Lighting

Ligh

ting

Tran

sfor

mer

s

Illumination Control51

Low Voltage Electronic Transformers Slim Type Compact Electronic Transformer 12V 60W

� BSEN61046, 55015, CE, EMC, TUV-GS � 240v to 12v - 60vA � Thermal overload protection � Supplied with 220mm (8") lead � Match Box Size

Low Voltage Electronic Transformers 12v 60 - 200vA (Dimmable with Inductive Dimmer)

� CE, EMC, TUV-GS � 12v - 60vA to 12v - 200vA � Thermal overload & short circuit protection � 12v - 60vA supplied with - 180mm lead length � Dimmable with most dimmers

Electronic Dimmable Transformer Dimmable with Normal (Resistive) MK / Home Automation Dimmer

� VDE, CE, EMC, SELV � 240v to 12v Electronic Transformer � Dimmable with normal resistive - MK, Home Automation dimmer � Lead Length - 170mm � Ratings - 60vA, 105vA, 150vA, 200vA & 250vA � Thermal overload & short circuit protection� Reliable Product - Made in EC

Torroidal Transformer

� BS EN60998 pt1, CE � 12v - 50vA� Thermal overload and short circuit protection� Supplied with a lead length - 190mm (50vA)

IMPORTANT!We recommended that you have the electrical componants installed by a qualified electrician!

Units are supplied with fitting instructions, please ensure that you read and understand theinstructions before commencing with installation.

TFX105

TFX60

LVTD105

LVTD60

TFX200

LVTD200

LVR

LVLH

LVT50E

Code Description Dimensions (mm) Box/QtyLVTT50C Torroidal Transformer 50vA 12v 75x65 24

Code Description Origin Box/QtyTFX60 Electronic Low Voltage Transformer 12v 60vA EC 10TFX105 Electronic Low Voltage Transformer 12v 105vA EC 10TFX150 Electronic Low Voltage Transformer 12v 150vA EC 10TFX200 Electronic Low Voltage Transformer 12v 200vA EC 10TFX250 Electronic Low Voltage Transformer 12v 250vA EC 10Note: Dimmable with Standard Dimmer - Resistive Type

Code Description Dimensions (mm) Box/QtyLVT50E Electronic Low Voltage Transformer

12V 60VA Match Box Size (Not Dimmable) 70x35x20 100

L.V. Lighting Lampholder & Spares

Code Description Box/QtyLVBT Low Voltage Lampholder, Clamp + Cable 10LVLH Low Voltage Lampholder + Cable 10LVR Low Voltage Ring 10

Code Description Dimensions (mm) Box/QtyLVTD60 Electronic Low Voltage Transformer

12v 60vA 75x35x35 100LVTD105 Electronic Low Voltage Transformer



12v 200vA 210x55x50 5

LVTT50C

sec017 Downlighter Eyeball.qxd 12/30/2004 20:00 Page 2

Diec

ast D

ownl

ight

ing

Full Illumination52

Diecast Aluminium Adjustable Downlighters - MR16c/w Clamp, Lampholder & Connector Blocks

� BS EN60598 pt1, CE � Comprising - High temperature double contact MICA covered ceramic lampholderwith high temperature silicon cable lead - VDE approved lampholder & cable � Supplied with clamp, terminal blocks which fits with clips to the main body of thefitting � Lamps - GX5.3 - simple Push & Turn locking device for easy lamp fitting(instead of clips) � Rotation Angle - 20° to 45° (355° maximum rotation on EyeballDCR16/360) � Durable Diecast Aluminium construction� Colour - White, Brass, Chrome & Satin Chrome� Supplied with fitting instructions � Twist & Lock Lamp retaining system

Pressed Steel & Diecast Single Clam Pack Kit for Low Voltage Lighting MR16

Kit consists of:- 1 Downlighter, 1 VDE 60vA Transformer1 Lampholder 15cm Cable (Male Connector)1.8Mtr Cable and Female Connector1 MR16 50W Glass Fronted Lamp

� BS 60598 pt1, CE � MR16 � Clamp Packing with Instruction � Durable Steel Construction � Available In: White, Satin Chrome, Chrome & Brass

Die-Cast Aluminium Fittings

LVD150K - DCR150K

N.B. Please add suffix - WHI for White, BRS for Brass, CHR for Chrome SC for Satin Chrome &BLK for Black when ordering. *Please refer to Selection Chart in the back of the catalogue for Cut Hole Size & Dimensions.Please measure the actual fitting before cutting hole.

DCSL16BRS

DCSL16SC

DCSL16WHI

DCAD16/20

DCGD16/20

DCG16TTCG

LVD150K

DCD16

DCAD16/45

Pressed Steel Adustable Downlighters - MR16

Code Description Angle Rating Box/QtyLVD150K 1 x 50W MR16 Downlighter Kit Fixed IP20 10LVAD150K 1 x 50W MR16 Adjustable Downlighter (Gimble) Kit 20° IP20 10LVE150K 1 x 50W MR16 Adjustable Eyeball Kit 45° IP20 10

Diecast Low Voltage Single Lighting Kit MR16

Code Description Angle Rating Box/QtyDCD150K 1 x 50W Diecast Downlighter Kit Fixed IP20 10DCAD150K 1 x 50W Diecast Adjustable Downlighter Kit 20° IP20 10DCR150K 360° Rotation Diecast Kit 45° IP20 10

Adustable Downlighters - MR16

Code Description Angle Rating Box/QtyDCD16 Diecast Downlighter Fixed - Twist & Lock Fixed IP20 10DCAD16/20 Diecast Downlighter 20° Adjustable - Twist & Lock 20° IP20 10DCAD16/45 Diecast Downlighter 45° Adjustable - Twist & Lock 45° IP20 10DCR16/360 Diecast Downlighter 360° Rotational - Twist & Lock 45°/360° IP20 10

Fixed/Gimble Diecast Downlighter Tilt 20°- MR16

Code Description Angle Rating Box/QtyDCFD16 Die Cast Downlighter Fixed Fixed IP20 10DCGD16/20 Die Cast Adjustable 20° 20° IP20 10

Shower Light - Heavy Duty - IP65 Diecast

Code Description Angle Rating Box/QtyDCSL16 Diecast Aluminium Shower Light - MR16 35W Fixed IP65 10DCSL16BB Shower Light 12v Brushed Brass - MR16 35W Fixed IP65 10DCSL16BC Shower Light 12v Brushed Chrome - MR16 35W Fixed IP65 10* Please add suffix WHI = White BRS = Brass CHR = Chrome SC = Satin Chrome when ordering.

Low Voltage 2 Tone Colour Fittings

Code Description Angle Rating Box/QtyDCG16TTCG Die Cast Adjustable 20° Chrome/Gold Two Tone Colour 20° IP20 10DCG16TTGC Die Cast Adjustable 20° Gold/Chrome Two Tone Colour 20° IP20 10


Trac

k Li

ghtin

g Ki

ts

Full Illumination53

Low Voltage Downlighter, Eyeball & Track Lighting Kits

Mains Voltage / GU10 Range

Low Voltage Downlighter/Eyeball Kits

� Approval - CE � Colour - White, Brass, Chrome & Satin Chrome� Transformer - 1 x 65vA - 12v � Lamps - 3 x 20W Dichroic lamps� Fittings - 3 x MR16 Downlighters or 3 x MR16 Eyeballs� Kit supplied with 6 clips, 5mtrs connecting cable and female connectors, plus 3lampholders with male connectors

Low Voltage Track Lighting Kits

� Approval - TUV-GS Track & fittings, CE � Track - 1 x 1Mtr � Transformer - 35W 105vA track linear transformer CE, EMC, TUV approved � 50W - 150vA track linear transformer CE, EMC, TUVapproved � Lamps - 3 x 35W or 3 x 50W Dichroic lamps� Fittings - 35W - Cone Shape (Universal) or 50W - Bullet Shape (with 45mm stemsize) � Colour - White. Gold (Gold fitting supplied with Black track adaptors)� Packaging - Blue coloured carton

GU10 Single, Triple & Four Lamp Spot Kits

� BSEN 60598 pt1, CE � Satin Chrome Spot � Elegant Design� Available In: Single, Triple Circular, Triple Block & Four Square� Colour: White, Brass, Chrome & Stain Chrome

Main Voltage Recessed (GU10) Downlighters, Eyeball & Adjustable Downlighter

� CE, F, Class II � Construction - Pressed steel for longer life� Wattage - 50W 240v maximum (no transformer required)� Colour - White, Brass, Chrome & Stain Chrome� Supplied with clamp, terminal block & European approved lampholder

MV1

LV105GKIT

MVB4

MV3

MVD10WHI

MVDG10LH

MVAD10BRS

LV105WKIT

MVB3

LVE320KIT

LVD320KIT

GZ10/GU10 Downlighter MR16

Code Description Angle Rating Box/QtyMVD10 Downlighter GZ10/GU10 MR16 240v 50W - IP20 10MVAD10 Downlighter Adjustable GZ10/GU10 MR16 240v 50W 20° IP20 10

GZ10/GU10 Eyeball MR16

Code Description Angle Rating Box/QtyMVE10 Eyeball GZ10/GU10 MR16 240v 50W 45° IP20 10

Main GZ10 Lampholder

Code Description Rating Box/QtyMVDG10LH Lampholder GZ10 240V 50W c/w Clamp

Connector Block , Earth Cable 50W 25

Code Description Rating Box/QtyMV1 Single Spot GU10 Lamp - Circular Fitting IP20 1MV3 Three Spot GU10 Lamp + Lamps - Circular Fitting IP20 1MVB3 Three Spot GU10 Lamp + Lamps - Bar IP20 1MVB4 Four Spot Plate Base Lamp - Square IP20 1* Please ad WHI for White, BRS for Brass, SC for Satin Chrome after the code.

Code Description Rating Box/QtyLV105WKIT 1. 1 Mtr Track 3 x 35W Universal Shape Fittings - 1

45mm Stem with Adaptors 3 x MR16 35W Lamps105vA Electronic Transformer - White Colour

LV105GKIT As above - but Gold Finish - 1

Adustable Downlighters - MR16

Code Description Rating Box/QtyLVD320 3 x 20W Downlighter + 3 Lamps & Transformer IP20 1

Eyeball Kit

Code Description Angle Rating Box/QtyLVE320 3 x 20W Eyeball + 3 Lamps & Transformer 45° IP20 1* Please ad WHI for White, BRS for Brass, CHR for Chrome after the code.

MVGD10LH


Mai

ns V

olta

ge L

ight

ing

Full Illumination54

Mains Voltage Lighting Fittings R50 - R63 - R80Reflector Lamps Series

� BS EN60598 pt1, CE � Comprising - Durable pressed steel construction, high temperaturedouble insulated terminal blocks ceramic lampholder & 20cm VDE approved cable� Supplied with clips which fits to the main body of the fitting� Lamps - R50 40W - E14(SES), R63 R80 - E27(ES) � Rotation Angle - 60° (vertical) - 355°rotation on Eyeball � Colour - White, Brass, Chrome & Stain Chrome� Supplied with fitting instructions

Mains Voltage Shower Light MVSL1

� CE Approved Lampholder � 240v - 50Hz � Suitable for reflector or PAR lamps � E27 (ES)lampholder � Colour - White � Supplied with gasket for safety & Opal dish � 60W (Max)

Mains Voltage Shower Light GU10

� Rating IP44 � High Quality Hard Glass � Takes GU10/GZ10 Lamps � Suitable for GU10 Lamps� Colour: White, Brass, Chrome & Satin Chrome

Multi Functional Hole Cutters - Adjustable

� Cuts hole in ceiling walls & floors � Cuts plywood, plasterboard and acrylicsheets up to 23mm thick � Drilling from opposite side allows up to 45mmthickness � Cuts aluminium, brass, metal sheet up to 1mm thick � Cuts holes from 3cm to 16.3cm (dia) � Fitted with transparent cowl whichprevents chips flying into eyes while cutting � Spring absorbs vibration whilecutting � Support base holds drill bit steady while cutting and keeps the cutperpendicular to the surface � Cutting depth and radius is easily adjustable byhexagonal locknut and adjusting lever � Supplied in a heavy duty blow mouldcarrying case & retail outer box � Cost effective when compared with buying allhole saws & Cutters � Supplied complete with all accessories & instructions � Can be used with most drills

Square Hole Cutters

� Cutting a square hole with hammer and chisel is difficult and time consuming� Ability to drill harder material like bricks and blocks � Designed for installingSwitch and Socket Boxes � Anti slip safety mechanism prevents accidentalrotation of EBS Square Cutter � Product Rapid, clean and accurate Square Holes � Available to make Single and Twin Boxes � EBS Time Saving IMPORTANT!

We have included a selection chart in the back of the catalogue to assist in determining thesize you should set your hole cutter to when fitting the various light fittings. Please refer toSelection Chart in the back of the catalogue for Cut Hole Size & Dimensions of the variouslight fittings.

Essential Hole Cutters

MVD SERIES

MVSL10 SERIES

N.B. Please add suffix - WHI for White, BRS for Brass, CHR for Chrome SC for Satin Chrome & BLK for Black when ordering. *Please refer to Selection Chart in the back of the catalogue for Cut Hole Size & Dimensions. Please measure the actual fitting before cutting hole.

MVE SERIES

EBS - EBS2RHC16

MVSL1

Code Description Box/QtyRHC16 Hole Cutter 3 - 16.3cm 1RHCB8/16M Spare Blade for RHC8/16 - Metal 3RHCB8/16W Spare Blade for RHC8/16 - Wood 3

Code Description Box/QtyEBS Square Box Cutter 1 Gang Switch and Socket Boxes 1EBS2 Square Box Cutter 2 Gang Switch and Socket Boxes 1* Spares available

Downlighters

Code Description Rating Box/QtyMVD50 Mains Voltage Downlighter R50 40W SES E14 IP20 10MVD63 Mains Voltage Downlighter R63 60W E27 ES IP20 10MVD80 Mains Voltage Downlighter R80 100W E27 ES IP20 10

Eyeballs

Code Description Angle Rating Box/QtyMVE50 Mains Voltage Eyeball R50 40W SES E14 60° IP20 10MVE63 Mains Voltage Eyeball R63 60W E27 ES 60° IP20 10MVE80 Mains Voltage Eyeball R80 100W E27 ES 60° IP20 10

Code Description Rating Box/QtyMVSL1 Mains Voltage Shower Light 60W ES White 60W 1

Code Description Colour Rating Box/QtyMVSL10WHI Mains Voltage Shower Light STEP GLASS - GU10 White IP44 1MVSL10BRS Mains Voltage Shower Light STEP GLASS - GU10 Brass IP44 1MVSL10CHR Mains Voltage Shower Light STEP GLASS - GU10 Chrome IP44 1MVSL10SC Mains Voltage Shower Light STEP GLASS - GU10 Satin Chrome IP44 1


Trac

k Li

ghtin

g

Full Illumination55

Track Lighting & Fittings Single Circuit (for Indoor Commercial Display Lighting)

� TUV-GS Approved� Suitable for all TM Series fittings listed below� Available In: 1Mtr & 2 Mtr Lengths � Colour: White

Track Fittings

� BSEN 60598 pt1, CE � All fitting fit track 1Mtr & 2Mtr� VDE Approved Lampholder Cable � High quality Steel Construction� MR16, GU10 are heavy duty diecast material� Fitted with transformer - MR16 Series only� Suitable for lamps: PAR20/30/38

MR16 50WGU10/GZ10 Mains

TM1W - TM2W

TRACK CONNECTORS

TRACK CONNECTORS

GU10 SERIES

TMRND10

TMHEX10

TMSQ10

TMU1 TMC20

TMHEX16

TMB38

TMSQ16

TMRND16

Size (mm)Bullet Single Circuit Track Fitting - PAR Lamp Series A B ColourTMB20 Bullet Round Back Fittings PAR20 200x110 155x90 WhiteTMB30 Bullet Round Back Fittings PAR30 210x110 175x110 WhiteTMB38 Bullet Round Back Fittings PAR38 280x165 210x145 White

Continental Fittings Main Voltage - PAR Lamp Series A B ColourTMC20 Continental Fittings PAR20 215x100 140x60 WhiteTMC30 Continental Fittings PAR30 235x110 165x110 WhiteTMC38 Continental Fittings PAR38 260x145 215x145 White

Universal Fittings Mains Voltage - PAR Lamp Series A B ColourTMU1 PAR20/PAR30/PAR38 Universal Fitting 180x55 135x50 White

Low Voltage Track Fittings For TM1W & TM2W - MR16 Lamp Series A B ColourTMRND16 Round Track Fittings MR16 Lamp c/w Transformer/Adaptor 160x80 80x60 WhiteTMHEX16 Hexagonal Track Fittings MR16 Lamp c/w Transformer/Adaptor 160x80 60x60x80 WhiteTMSQ16 Square Track Fittings MR16 Lamp c/w Transformer/Adaptor 160x80 60x60x80 White

GU10/GZ10 Mains Fittings For TM1W & TM2W - GU10 Lamp Series A B ColourTMRND10 Round Track Fittings GU10/GZ10 Lamps 145x80 55x75 WhiteTMHEX10 Hexagonal Track Fittings GU10/GZ10 Lamp 150x80 60x60x80 WhiteTMSQ10 Square Track Fittings GU10/GZ10 Lamp 150x80 60x60x80 White(A) Distance of the fitting from track (B) Length of the fitting.

Lighting Track 3 Wire (Live, Neutral & Earth) TUV GS Approved

Code Description Box/QtyTM1W 1Mtr Long 3 Circuit Track White Colour 1TM2W 2Mtr Long 3 Circuit Track White Colour 1

Lighting Track Accessories complies to "TUV-GS" Standards

Code Description Box/QtyTMC Track Connector (Coupler) 1TMCF Track Flexible Connector 1TMLE Track Live End 1TMEC Track End Cap 1TMB 90° Bend 1TMT 3 Way Connector 1TMX 4 Way Connector 1

Track Fittings - Dimensions

IMPORTANT!Track Fittings dimensions are measured bothvertically (A) and horizontally (B) refer to thetable above for the specific dimensions.


Full Illumination

Ener

gy S

avin

g Li

ghtin

g

56

PL Downlighter Horizontal Lamps c/w Gear

� CE � Colour - White (only) � VDE approve ballast & control gear� Comprising - Pressed steel body with high quality aluminium reflector and plastic gear Box � Lamps - Suitable for PL & PLC energy saving lamps (indooruse only) � Fitting - Horizontal and vertical versions available - (horizontal ideal forlow ceiling installation) � Metal Halide fitting c/w Hard Glass

Shaver Light Dual Voltage

� BS EN60598, CE � 240v - 50Hz � Single & Dual voltage - Two version 20vA safety isolating transformer � Design - White polycarbonate body Opal diffuser which is durable and easy to clean � Fixing Hole - 130mm � 60W - 284 Double ended Strip Light � Pull-Cord Switch

Striplight Fittings

� BSEN60598 pt2-1, CE � Available in 3 versions - unswitched, push-button or pull-cord� Wattage- Maximum 60W � Length - 221mm 284mm � Colour - White� Safety - Double pole safety isolation when re-lamping � Supplied with 2Mtrs BASEC approvedcable and installation instructions � Packing - Individually boxed

Metal Halide Downlighter c/w Remote Gear

Energy Saving RecessedDownlighting PL & PLC Lamps

Striplite & Linklite T4 & T5

Slimline Electronic Kitchen & Cupboard Linklite T4with Diffuser to BSEN60598-2 "CE" Approved

� BSEN 60598 pt2, CE � IP20 � Colour - White � Electronic Individual Switch� Supplied with Connector, Mains Lead, Plug Top, Tube & Diffuser

SLL6 - SLL20

ST284 - ST284P

SL1DV

ESD29HD

ESDMH70C

ESD218HG

ESD29V

Full Illumination

Code Description Dimensions (mm) Box/QtyST221 Striplight 221mm + 2Mtrs Cable Unswitched 330x30x55 1ST284 Striplight 284mm + 2Mtrs Cable Unswitched 390x30x55 1ST221P Striplight 221mm + 2Mtrs Cable Pullcord 330x30x55 1ST284P Striplight 284mm + 2Mtrs Cable Pullcord 390x30x55 1ST221S Striplight 221mm + 2Mtrs Cable Switched 330x30x55 1ST284S Striplight 284mm + 2Mtrs Cable Switched 390x30x55 1

Code Description Lamp CAP Gear Tray Box/QtyESDMH70C Recessed Downlighter 70W Metal Halide Circular LMBI70DE R7S MHG70 12ESDMH150C Recessed Downlighter 150W Metal Halide Circular LMBI150DE R7S MHG150 12* Please refer to the selection chart for Cut-Hole & Height for Energy Saving Recessed Downlighter.

Code Description Lamp CAP Box/QtyESD29H Recessed Downlighter 2 x 9W PL XLPL9 G23 12ESD218H Recessed Downlighter 2 x 18W PLC XLPLC18 2PIN G24d2 12ESD226H* Recessed Downlighter 2 x 26W PLC XLPLC26 2PIN G24d3 8ESD29HD Recessed Downlighter 2 x 9W complete with Diffuser XLPL9 G23 8ESD218HD Recessed Downlighter 2 x 18W complete with Diffuser XLPLC18 2PIN G24d2 8ESD226HD* Recessed Downlighter 2 x 26W complete with Diffuser XLPLC26 2PIN G24d3 8ESD29HG Recessed Downlighter 2 x 9W complete with Glass XLPL9 G23 8ESD218HG Recessed Downlighter 2 x 18W complete with Glass XLPLC18 2PIN G24d2 8ESD226HG Recessed Downlighter 2 x 26W complete with Glass XLPLC26 2PIN G24d3 8ESD29V Recessed Downlighter 2 x 9W PL XLPL9 G23 12ESD118V Recessed Downlighter 1 x 18W PLC XLPLC18 2PIN G24d2 12*2 x 26W with Remote Control Gear*Please refer to the back section of the catalogue for Cut Hole Size.

Code Description Dimensions(mm) Box/QtySLL6 Slim 6W 275mm c/w Connector, Mains Lead, Plug & Tube 275 1SLL8 Slim 8W 326mm c/w Connector, Mains Lead, Plug & Tube 326 1SLL12 Slim 12W 460mm c/w Connector, Mains Lead, Plug & Tube 460 1SLL16 Slim 16W 530mm c/w Connector, Mains Lead, Plug & Tube 530 1SLL20 Slim 20W 630mm c/w Connector, Mains Lead, Plug & Tube 630 1N.B. All Link Lights are supplied with Female/Male connector and are individually switched.

Code Description Dimensions(mm) Box/QtySL1DV Shaver Light 110/240V 284mm (Lamp Not Included) 440x70x75 12


Link

Lig

htin

g

Full Illumination57

Slimline Electronic Kitchen & Cupboard Linklite T5

� BSEN60598 pt2, CE � IP20 � Individually Switched� Uses standard T5 Tube � Colour: White � Available In: Single or Twin � Supplied with Tube, Connector, Mains Lead with Plug Top & Diffuser

Electronic Mini Fluorescent Fitting - Switched

Linklite Accessories

Torches & LanternsRe-Chargable Torch

� Rechargeable Torch � Torch with head tilt 70% Extra Powder Krypton Lamp� Energy Flasher � Colour:- Black/Yellow � Plug In Main Charger � Wall Mounting � Charging Bracket � Car Lighter - Chargeable Plug � Includes 2xAA Nicad Battery � Dimension:- 19cm (7" Approx)

T5LL6 - T5LL35

T5 SERIES

Linklite

Rubber Torch

� Rubber Torch-Waterproof � 70% brighter Krypton Lamp � Available in: 2xD Type Batteries or in 3xD Type Batteries (battery not included)� Spare Bulb Holder on the Strap

Lantern - Work Torch

� Touch weatherproof construction 70% brighter Krypton Lamp� Suitable to use 4xD(Size) Batteries or PJ996 Battery Wrist Strap� Length 19cm � Colour Black & Yellow

FTWC

LRT2D

FL6 - FL13

LWT996

Code Description Battery Type Length Colour Box/QtyLRT2D Rubber Torch 2d Batteries 2 x D Type Black/Yellow 48LRT3D Rubber Torch 3d Batteries 3 x D Type Black/Yellow 48LWT996 Work Torch PJ996 Lantern 4D or PJ996 Black/Yellow 48

Code Description Dimensions Colour Box/QtyFTWC Rechargeable Emergency

Torch with Head Tilt 190mm Black/Yellow 48

Code Description Box/QtyFL6 9" 6W Electronic Ballast Fitting with Switch - Mini 1FL8 12" 8W Electronic Ballast Fitting with Switch - Mini 1FL13 21" 13W Electronic Ballast Fitting with Switch - Mini 1

Slimline Electronic Linklite with Diffuser - SIngle

Code Description Lamp Length Box/QtyT5LL6 T5 Link Lite 9" 1 x 6W 278mm 1T5LL8 T5 Link Lite 12" 1 x 8W 404mm 1T5LL13 T5 Link Lite 21" 1 x 13W 574mm 1T5LL14 T5 Link Lite 25.5" 1 x 14W 632mm 1T5LL21 T5 Link Lite 35.5" 1 x 21W 887mm 1T5LL28 T5 Link Lite 47.5" 1 x 28W 1184mm 1T5LL35 T5 Link Lite 59.5" 1 x 35W 1486mm 1

Slimline Electronic Linklit with Diffuser - Twin

Code Description Lamp Length Box/QtyT5LL028 T5 Twin Link Lite 2 x 8W 404mm 1T5LL214 T5 Twin Link Lite 2 x 14W 632mm 1T5LL228 T5 Twin Link Lite 2 x 28W 1184mm 1T5LL235 T5 Twin Link Lite 2 x 35W 1486mm 1*Suitable for T5 Standard Tube Replacement.

Connectors Dimensions Diffuser Dimensions Tube Wattage Box/QtySLLC20 20cm SLLDF6 275mm SLLFT6 6W 1SLLC40 40cm SLLDF8 326mm SLLFT8 8W 1SLLC60 60cm SLLDF12 460mm SLLFT12 12W 1SLLC80 80cm SLLDF16 530mm SLLFT16 16W 1SLLC100 100cm SLLDF20 630mm SLLFT20 20W 1


Bras

s La

mph

olde

rs

Full Illumination58

Brass Lampholder Range - BS Approved

� BS EN60238 - BS5042 � Made out of brass turn part & metal brass steel� Supplied with shade rings � Available In - B22 (BC) & B15d (SBC) type� Thread Size - 1/2" � Standard, Switch & Batten version� Supplied with earth terminal on outer body

Brass Lampholders & Ceiling Maestro

IP66 Range

BL5/SBC

BL5

CMCHR

BLB

WSK1IP66

BLHP

LWTR1M

BL5/S

WS12IP66

Re-Chargable Lantern

Code Description Box/QtyLWTR1M 1 Million Candle Re-chargeable Lantern Yellow (10 1/2" x 8 1/2") 6LWTR1/2M 1/2 Million Candle Re-chargeable Lantern Black (10 1/2" x 8 1/2") 6

Supplied c/w Charging Kit

Ceiling Maestro Plug-In Type

Code Description Box/QtyCM Brass Plug-ln Ceiling Rose c/w Hook for Heavy Duty Fittings 6CMCHR Chrome Plug-In Ceiling Rose c/w Hook for Heavy Duty Fittings 6

Code Description Type Box/QtyBL5 1/2" Threaded Brass Lampholder BC(B22) - (GP018) 20BL5/SBC 1/2" Threaded Brass Lampholder SBC(B15) - (GP015) 50BL5/S 1/2" Threaded Brass Lampholder

Switched B22(BC) - (GP091) 20BLB 1/2" Brass Battenholder BC(B22) - (GP018BT) 25BLB/SBC 1/2" Brass Battenholder SBC(B15) - (GP015BT) 50BLBP5 1/2" Brass Flange/Back Plate 50BLRD510 1/2"-10mm Brass Reducer 50BLHP Brass Ceiling Hookplate 10

WSK2IP66

IP66 Sockets, Switches & Spurs

� IP66 - IK 08 � Colour - Grey RAL 7016 / to 29� Polypropylene/ABS Housing� Temperature Rating:- -20 to +40°C (+50°C for short periods)� Provision for 20mm dia. conduit entries (side and rear)� Stainless Steel captive terminal screws supplied in backed-off postion� Fitted with RGK Gasket with groove to deposit silicon

13Amp Socket Outlets 250v to BS1363 Part 2Code DescriptionWSK1IP66 1 Gang unswitchedWSK2IP66 2 Gang Unswitched

20Amp Switches to BS EN 60669-1Code DescriptionWS12IP66 1 Gang 2 Way SP SwitchWS22IP66 1 Gang 2 Way SP Switch

6Amp Push-ButtonCode DescriptionWSBELLIP66 1 Gang 2 Way Bell

13Amp Fused Spur Unit to BS1363 Part 4Code DescriptionWSPSIP66 1 Gang DP Switched


Controlling Events

Star

ters

59

FL Starters, Photocell & Time Lag Switches

Fluorescent Starters� BS 3772, BS EN60155� 220 - 240v � Range - FSU (Universal 4-80W)

FS2 (4-22W Series)FS125 (85-125W 8')

� FSU, FS2 - Are all Kite Marked, FSU is also supplied in Non Kite Mark (BudgetRange) � All products supplied with Polyethylene high quality Myler Condenser� All starters have bottle type ignitor for safety and longer life

Electronic Starter� Approval - BS3772, CE � Saves energy & increases lamp life� Electronic instant start � Range - 4W - 125W � Dimensions - 21mm (Dia.) x 35mm (L) � Polycarbonate Cap & Brass Pins

Time Lag Switch Electronic & Mechanical� BSEN 60730-2-7 CE, LVD, LVE� 250v 10A 5A Fluorescent Lighting (Max 6 Fittings) Mounting 25mm Single Box� Timing 10 secs to 10 minutes - Impact Resistance� 3 Years Warranty � No Neutral Connection - Easy Installation� Replace existing 1G Wall Switch � Ideal for Staircases & Corridors� Electronic:- 10Amp Normal & 5Amp Fluorescent� Mechanical:- 6Amp Normal & 3Amp Fluorescent

Dimensions:- Type Dimensions Fixing Centre Colour Metal Box DepthElectronic 80x80x16mm 60.3mm White STL 8mmMechanical 83x83x20mm 60.3mm White STLE 15mm

Code Description Origin Box/QtyFSE Electronic Starter 18/125W EC 10

Code Description CAP PINS Ignitor Box/Qty Inner MasterFSU 4-80W Universal Starter Non Flammable Aluminium Bottle Type 25 250 2500FSU/KM 4-80W Universal KiteMark VDE (H1X) Non Flammable Aluminium Bottle Type 25 250 2500FS2/KM 4-22W Series VDE KiteMark (H2X) Non Flammable Aluminium Bottle Type 25 250 2500FS125/I 70/75/85/100/125W Polycarbonate Non Flammable Brass Bottle Type 25 - 1000

Photo Cells Head, Kit & Micro Cell Kit� Approval - BS5972, EMC � 230±10% 50/60Hz � Micro Cell Load Resistance - 5Amp � Load - 10Amp � Switching Delay - 48 secs� Switch light automatically at dusk and off at dawn� Diamond H thermal relay (Photo head & Kit) � Micro Cell (electronic relay) 20mm size & 17mm width� Kit consists of NEMA Socket, Wall Bracket, Gasket, Screws & Wall Plugs � Guarantee - 3 Years

Code Description Load Dimensions (mm) Mounting Type CellPEC300KIT/T* Thermal Photo Cell kit 10A 110x105x75 Surface ThermalPEC300T* Thermal Photo Cell only 10A 54x80 NEMA Socket ThermalPECMCKIT* Micro Cell Kit 20mm 5A 45x45x30 Inside the fitting ElectronicPECNS Nema SocketPECWB Wall Bracket* Resistive Load

Code Description Origin DepthSTL Time Lag Switch Fluorescent ELKAY (400A)

10 secs - 10 mins. 10A Normal, 3A Fluorescent UK 8mmSTLE Electronic Time Lag Switch 10A Incandescent

6Amp Fluorescent Fits 25mm Box UK 15mm

PEC300KIT/T

FS2/KM

FSE

FS125/I

STL

FSU

STLE

PECMCKIT

PEC300T

sec018 FL Starters.qxd 12/20/2004 18:32 Page 1

Lam

ps

Lighting The Way Ahead60

Dichroic & GU10 Lamps

Coloured Dichroic Lamps

Standard Dichroic Lamps

Longer Lasting 5000Hrs Dichroic Lamps

GU10 Lamps 240v 50W

Coloured Dichroic Lamps MR16 Covered (GX5.3)

Dichroic Lamps "CE" Approved 2000Hrs & 5000Hrs

� CE � Average Life - 2000 hours � H5 Series - 5000Hrs� Dichroic reflector reduces heat radiated in the beam up to 50% and produces coolwhite light - ideal for interior lighting � Cap Type - MR11 - GZ4 (GU4), MR16 GX5.3 (GU5.3) � Packaging - Colour boxes (suitable for retail display) plus bar codes� Available In - MR11 (35W Max)

8 MR16 (50W Max) � Narrow, Medium & Wide Beam (refer to beam angle° below)

Dichroic Lamps - 50mm Dia. MR16 GX5.3 50W - OpenCode Code2000H 5000H ANSI Code Voltage Wattage Beam Angle Type Box/QtyM49 EXT 12v 50W 12º Narrow 20M50 EXZ 12v 50W 24º Medium 20M58 EXN 12v 50W 36º Wide 20M80 FNV 12v 50W 60º Extra Wide 20

Glass Covered Front - 50mm Dia. MR16 GX5.3 50WM249 M249H5 EXT/CG 12v 50W 12º Narrow 20M250 M250H5 EXZ/CG 12v 50W 24º Medium 20M258 M258H5 EXN/CG 12v 50W 36º Wide 20M280 M280H5 FNV/CG 12v 50W 60º Wide 20

Dichroic Lamps - 50mm Dia. MR16 GX5.3 35W - OpenM70 FMV 12v 35W 24º Medium 20M71 FMT 12v 35W 12º Narrow 20M81 FMW 12v 35W 36º Wide 20

Glass Covered Front - 50mm Dia. MR16 GX5.3 35WM270 M270H5 FMV/CG 12v 35W 24º Medium 20M271 M271H5 FMT/CG 12v 35W 12º Narrow 20M281 M281H5 FMW/CG 12v 35W 36º Wide 20

Dichroic Lamps - 50mm Dia. MR16 GX5.3 20W - OpenM68 ESX 12v 20W 12º Narrow 20M94 BBF 12v 20W 24º Medium 20M69 BAB 12v 20W 36º Wide 20

Glass Covered Front - 50mm Dia. MR16 - GX5.3 20WM268 M268H5 ESX/CG 12v 20W 12º Narrow 20M294 M294H5 BBF/CG 12v 20W 24º Medium 20M269 M269H5 BAB/CG 12v 20W 36º Wide

Dichroic Lamps - 35mm Dia. MR11 GZ4 20W - 35W - OpenM51 FTC 12v 20W 18º Medium 20M52 FTB 12v 20W 12º Narrow 20M62 FTD 12v 20W 36º Wide 20M66 FTH 12v 35W 18º Medium 20

Glass Covered Front - 35mm Dia. MR11 GZ4 20W - 35WM251 M251H5 FTC/CG 12v 20W 18º Medium 20M252 M252H5 FTB/CG 12v 20W 12º Narrow 20M262 M262H5 FTD/CG 12v 20W 36º Wide 20M266 M266H5 FTH/CG 12v 35W 18º Medium 20N.B. For 5000Hrs Lamps codes add H5 after the standard M series lamp code.* Available only on popular sizes.

Code ANSI Code Colour Voltage Wattage Beam Angle Type Box/QtyM249RED EXT/CG Red 12v 50W 12° Narrow 10M249BLU EXT/CG Blue 12v 50W 12° Narrow 10M249GRN EXT/CG Green 12v 50W 12° Narrow 10M249YEL EXT/CG Yellow 12v 50W 12° Narrow 10M268RED ESX/CG Red 12v 20W 12° Narrow 10M268BLU ESX/CG Blue 12v 20W 12° Narrow 10M268GRN ESX/CG Green 12v 20W 12° Narrow 10M268YEL ESX/CG Yellow 12v 20W 12° Narrow 10Note: Products are sold minimum 10 pieces

Code Description Voltage Wattage Type Box/QtyMGU10/35C GU10 Lamp Covered Glass 240v 35W 10MGU10C GU10 Lamp Covered Glass 240v 50W 10MGU10C/B** GU10 Lamp Branded 240v 50W 15** UK - Lamps Branded, minimum order quantity 15 pieces.

M249H5 - M266H5

M49 - M266

GU10 LAMPS

M249YEL - M268YEL

sec019 Lamps.qxd 12/29/2004 14:20 Page 1

Lam

ps


Electronic Energy Saving Compact Fluorescent LampsFeatures

� CE, EMC, TUV-GS, SEMCO � Over current protection � Radio interference suppressed � Average life - 8000 hours life time (3 hours per start) complies with 1EC969 � Construction - Manufactured from European high quality components � Colour - 2700k (warm white) � Energy Saving - Up to 80% energy saving compared ordinary lamp � Life - 10 times life expectancy compared to incandescent lamps � Flicker free instant start, works up to (-20°C) � Available In - BC(B22) ES(E27) or E14(SES) versions � Not suitable for use with dimmers or electronic switches � Packaging - High quality colour boxes (ideal for display)

Output Comparison5W=25 Watt 15W=75 Watt7W=40 Watt 16W=80 Watt9W=50 Watt 20W=100 Watt11W=65 Watt 26W=130 Watt

Energy Saving Lamps Spiral, GLS, Globe & Candle

CFL 16W - 26W Triple 8,000Hrs Standard Range3U (Flicker Free Start)

Electronic Candle Lamps 8,000Hrs "TUV, GS, EMC"

Globe Energy Saving Lamps 8,000Hrs "TUV, GS, EMC"

GLS Energy Saving Lamps 8000Hrs “TUV, GS, EMC”

Spiral Energy Saving Lamps 8,000Hrs "TUV, GS, EMC"

CFL 5W - 15W Double 8,000Hrs 2U (Flicker Free Start)

Lumen Dimensions ReplaceCode BC Code ES Code SES Watts Output LxDia. Lamp Box/QtyCFL5DBC CFL5DES CFL5DSES 5 250 110x40mm 25W 10CFL7DBC CFL7DES CFL7DSES 7 400 120x40mm 40W 10CFL9DBC CFL9DES - 9 500 129x40mm 50W 10CFL11DBC CFL11DES - 11 600 139x40mm 60W 10CFL15DBC CFL15DES - 15 900 172x45mm 75W 10

Lumen Dimensions ReplaceCode BC Code ES Watts Output LxDia. Lamp Box/QtyCFL16TBC CFL16TES - 16 950 138x48mm 80W 10CFL22TBC CFL22TES - 22 1200 148x48mm 100W 10CFL26TBC CFL26TES - 26 1500 162x48mm 130W 10

Lumen Dimensions ReplaceCode BC Code ES Watts Output LxDia. Lamp Box/QtyCFS9BC CFS9ES - 9 500 103x46mm 50W 10CFS11BC CFS11ES - 11 600 110x55mm 60W 10CFS15BC CFS15ES - 15 900 130x60mm 75W 10CFS20BC CFS20ES - 20 1200 140x60mm 100W 10

Lumen Dimensions ReplaceCode BC Code ES Watts Output LxDia. Lamp Box/QtyCFG9BC CFG9ES - 9 500 134x60mm 50W 10CFG11BC CFG11ES - 11 600 131x65mm 60W 10CFG15BC CFG15ES - 15 900 142x65mm 75W 10CFG20BC CFG20ES - 20 1200 156x70mm 100W 10

Lumen Dimensions ReplaceCode BC Code ES Watts Output LxDia. Lamp Box/QtyCFGB9BC CFGB9ES - 9 500 138x78mm 50W 10CFGB11BC CFGB11ES - 11 600 138x78mm 60W 10CFGB15BC CFGB15ES - 15 900 155x90mm 75W 10CFGB20BC CFGB20ES - 20 1200 170x103mm 100W 10

Lumen Dimensions ReplaceCode BC Code SBC Code SES Code ES Watts Output LxDia. Lamp Box/QtyCAN3BC CAN3SBC CAN3SES CAN3ES 3 135 118x40mm 15W 10CAN5BC CAN5SBC CAN5SES CAN5ES 5 220 128x40mm 25W 10CAN7BC CAN7SBC CAN7SES CAN7ES 7 400 160x48mm 40W 10

CFL5DES

CFL22TES

CFGB11BC

CFS11BC

CFG11BC

CFL16TBC

CANDLE LAMPS


Lam

ps


Discharge Lamps

Tungsten Halogen LampsLinear Tungsten Halogen Lamps - R7S "CE" Approved 240V

� CE � Voltage: 240/110v � Manufactured from high quality glass and compound with sturdy filamentconstruction - fixed ring type� Available In: 100W & 150W 118mm length for energy saving uplighter� Colour: 2800 - 3000k � Average Life: 2000 hours� Cap: Double Ended, Base: R7S � Range: 100w -1500W

Capsule Lamps 2,000Hrs

� CE � Compact light source - high output � Axial filament produces uniform light � Average Life - 2000 hours � Colour - 2800 - 3000k � Packaging - Four colour box packing

SON Lamps - High Pressure Sodium Lamps

� CE � Universal burning position � 70W - supplied with or without ignitor� 150W, 250W & 400W without ignitor � - External ignitor - with ignitor � Low colour rendering lamp � Tubular - no ignitor

Metal Halide Lamps

� CE � High colour rendering lamp � 70W - 150W double ended R7S -Tubular� 250W, 400W- 1000W tubular/elliptical single ended� All metal halide lamps require ignitor in the fitting

Mercury Lamps

� CE � Universal burning position � Elliptical available in 80W, 250W & 400W� General use for factory and areas where colour rendering is not important� Low lumen output compared with Metal Halide SON Lamps

Code Voltage Wattage Dimensions LxW Pin Distance Cap Box/QtyM76 12V 20W 30x8mm 6.35mm GY6.35 100M32 12V 50W 44x10mm 6.35mm GY6.35 100M47 12V 20W 30x8mm 4mm G4 100M91 12V 10W 30x8mm 4mm G4 100

BaseCode LxDia Ø Watts Lumen 110v Code Length Cap Box/QtyLTH100 78x8mm 100W 1200 LTH100/1 118mm R7S 50LTH100/118 118mm 100W 1200 - 118mm R7S 50LTH150 78x8mm 150W 2000 LTH150/1 118mm R7S 50LTH150/118 118mm 150W 2000 - - R7S 50LTH200 118x8mm 200W 3200 - - R7S 50LTH300 118x8mm 300W 5000 LTH300/1 118mm R7S 50LTH500 118x10mm 500W 9500 LTH500/1 118mm R7S 50LTH750 189x10mm 750W 15000 - - R7S 50LTH1000 189x10mm 1000W 21000 LTH1000/1 189mm R7S 50LTH1000/254 254x10mm 1000W - LTH1000/1/254254mm R7S 50LTH1500 254x10mm 1500W 33000 LTH1500/1 254mm R7S 50N.B. for 110v type - add suffix /1 after the standard code.E.g. 500W 240v lamp code = LTH500, 500W 110v lamp code = LTH500/1

Elliptical Tubular Code Wattage Type Cap Lumen LxDia. (mm) LxDia.(mm) Box/QtyLMBFU80ES 80W Elliptical E27 3500 156x70 - 10LMBFU250E 250W Elliptical E40 GES 11000 226x90 - 10LMBFU400E 400W Elliptical E40 GES 21000 290x120 - 10

Elliptical Tubular Code Wattage Type Cap Lumen LxDia. (mm) LxDia.(mm) Box/QtyLMBI70DE 70W Double Ended Tubular HQI R7S 5000 114x20 - 12LMBI150DE 150W Double Ended Tubular HQI R7S 10000 132x23 - 12LMBI250E/T 250W Tubular/Elliptical HQI E40 15000 226x90 225x46 12LMBI400E/T 400W Tubular/Elliptical HQI E40 28500 290x120 285x46 12

Elliptical TubularCode Wattage Type Cap Lumen LxDia. (mm) LxDia.(mm)LSON70E/T 70W Tubular/Elliptical E27 5500 156x71 156x38LSON70E/I 70W Elliptical/Ignitor E27 5500 156x71 156x38LSON150E/T* 150W Tubular/Elliptical E40 15500 227x91 211x47LSON250E/T* 250W Tubular/Elliptical E40 27500 227x91 257x47LSON400E/T* 400W Tubular/Elliptical E40 49000 285x120 285x47* E for Elliptical T for Tubular

SONT

HQI

SONE

MBI

MBF

M76 - M91

THD LAMPS

LTH100 - LTH1500


Lam

ps


Energy Saving PL & PLC Replacement Lamps

Striplights

PL Lamps Economy Range G23 with Sylvania Starter

� Built-In Sylvania starter � Voltage - 220/240v a.c.� Manufactured from high quality glass and compound � 2 x PL Lamps in the same circuit can be used � Available In - 2 pin & 4 pinversions (PLC lamps only) � Packaging - colour boxes (suitable for retail display)� Colour - 4200k (cool white)

Energy Saving Lamps 16W, 28W & 38W2PIN & 4PIN Lamps

� Energy saving 2/4 Pin lamp � Better colour rendering - Polylux� Supplied in 16W & 28W 3500 White colour � 28W - Supplied in 2 Pins & 4 Pins� Cost effective, more efficient uniform spread of light due to its shape

PLC Lamps 10-26W Economy Range 2 & 4 Pins (G24D Base) with Sylvania Starter

Fluorescent Tubes (Miniature Tubes)

� CE � Colour - White & Cool White � High efficacy, low cost and energy saving� Available In - 4W, 6W, 8W & 13W � Packaging - Individually packed � T5 - 16mm (5/8” Dia.)

Code Code Replacement No 2 Pin 4 Pin2 Pin 4 Pin Lamp Dimensions (mm) Lumen Pins Cap Cap Box/QtyXLPLC10 XLPLC104P 70W 120x27x79 600 2/4 G24d1 G24g1 25XLPLC13 XLPLC134P 80W 147x27x105 800 2/4 G24d1 G24g1 25XLPLC18 XLPLC184P 100W 163x27x122 1150 2/4 G24d2 G24g2 25XLPLC26 XLPLC264P 150W 173x27x150 1650 2/4 G24d3 G24g3 25*Add suffix 4P to the order code for 4 Pin Lamps (normal codes are for 2 Pin) for pins shape and position ofXLPLC lamps refer to the comparison chart located in the back of this catalogue.

ReplacementCode Lamp Dimensions Lumen Pins Cap Box/QtyXL16/2P 16W 13mm Tube 3500k 2 (GR8) 20XL16/4P 16W 13mm Tube 3500k 4 (GR10) 20XL28/2P 28W 19mm Tube 3500k 2 (GR8) 20XL28/4P 28W 19mm Tube 3500k 4 (GR10) 20XL38/2P 38W 19mm Tube 3500k 2 (GR8) 20XL38/4P 38W 19mm Tube 3500k 4 (GR10) 20

ReplacementCode Lamp Watts Dimensions Lumen Pins Cap Box/QtyXLPL7 40W 7 132x27mm 380 2 G23 20XLPL9 50W 9 163x27mm 540 2 G23 20XLPL11 60W 11 230x27mm 600 2 G23 20

Code Description Wattage Dimensions Colour Box/QtyLSL30221C Strip Lamp 30W 221mm Clear 50LSL30221O Strip Lamp 30W 221mm Opal 50LSL30284C Strip Lamp 30W 284mm Clear 50LSL30284O Strip Lamp 30W 284mm Opal 50LSL60221C Strip Lamp 60W 221mm Clear 50LSL60221O Strip Lamp 60W 221mm Opal 50LSL60284O Strip Lamp 60W 284mm Opal 50LSL60284C Strip Lamp 60W 284mm Clear 50

Code Code White Cool White Description Dimensions Lumen Box/QtyFT2113W FT2113CW 21" 13W Tube T5 525x16mm 820 10FT128W FT128CW 12" 8W Tube T5 300x16mm 400 10FT96W FT96CW 9" 6W Tube T5 225x16mm 280 10FT64W FT64CW 6" 4W Tube T5 150x16mm 140 10

Fluorescent Accessories - Clips & LampholdersTubes Clips Description Lampholder Description Type Box/QtyFFTC5 T5 Terry Tube Clip FFLH5 Lampholder T5 20FFTC8 T8 Terry Tube Clip FFLH8 Lampholder T8 20FFTC12 T12 Terry Tube Clip FFLH12 Lampholder T12 20

XLPL11

XL28/2P

XL16/2P

XLPL7

XLPLC10 - XLPLC26

FLUORESCENT TUBES

STRIPLIGHTS


Desk

&Ce

iling

Fans

A Breath Of Fresh Air64

General Features� BS3456 & BS EN60335-2 � 240v - 50HzSTF9D, STF12D, STF16D, SSF16D - type tested by BSI(Selling successfully for over 15 years) � Colour - White body & grill, Dark Grey blades� Grey colour piano style key switch for variable speed and On/Off control� Oscillating mechanism in the centre of the motor guard� Oscillating movement has whisper quiet operation, circulates air evenly and

efficiently� Aerodynamic blade for more powerful air delivery� Durable safety approved grill and non scratch rubber feet� Oscillating head with slipping clutch mechanism for safety� Modern stylish design and colour to suit most decors� 2 metres VDE approved 3 core cable and supplied with fitted BSI approved

plug

Desk, Pedestal, Ceiling/Wall, Clip-On Desk & Pedestal Fans "TUV, GS, CE" Approved to BSEN60335-2

STF9D (9" Desk/Wall)

� 2 Speed Oscillating On/Off switch � 240v - 50Hz 24W� Desk/Wall mounting � Size - Blade 9", Grill 10 ¾", Height 16 ½" approx.

STF12D (12" Desk/Wall)

� 3 Speed Oscillating On/Off Switch � 240v - 50Hz 38W � Desk/Wall mounting � Size - Blade 12", Grill 14½", Height 20" approx.

STF16D (16" Desk Fan)

� Desk only � 3 Speed Oscillating On/Off switch� 240v - 50Hz 50W � Size - Blade 16", Grill 18", Height 24" approx.

SSF16D (16" Pedestal Fan)

� 3 Speed Oscillating On/Off switch � 240v - 50Hz 50W � Pedestal stand height -adjustable (44" - 55" approx.) � Size - Blade 16", Grill 18"

SCF6/STF6 (6" Clip On Fan / 6" Desk Fan)

� 2 Speed Non Oscillating (Switch at the back of fan with circular movement forspeed control) � 240v - 50Hz - 18W� SCF6 - Clip On Fan - Fits on most desk wood thickness for space saving� STF6 - Table version � Size - Blade 6", Grill 8", Height 11"

SWF16 (16" Wall Fan) Pull Cord Switch

� 3 Speed - On/Off Oscillating � Pull Cord Switch for variable speed control� Space Saving - fits on to the wall with metal bracket� Size - Blade 16", Grill 18", Height 20" � 50W 240v 50Hz

Tower Fan STF1

� Complies to - TUV-GS, CE � Occupies less space � 240v - 50Hz 45W � Provides a soft breeze for children & old people � Colour - White � 3 Speed On/Off switch � Rotation - 90° oscillating or fixedflow of air

Desk/Ceiling Fans &Portable Air Conditioners

Code Description Speed RPM Wattage Box/QtySTF6 6" Desk Fan 2 Speed 2 2200 18W 6STF9D 9" Desk/Wall 2 Speed Oscillation Fan 2 1800 24W 6STF12D 12" Desk/Wall 3 Speed Oscillation Fan 3 1300 38W 5STF16D 16" Desk 3 Speed Oscillation Fan 3 1200 50W 4SSF16D 16" 3 Speed Oscillation Pedestal Fan 3 1200 50W 3SCF6 6" Clip on Fan 2 Speed 2 2200 18W 6SWF16 16" Pull Cord 3 Speed Wall Fan 3 1200 50W 3STF1 Tower Fan with Timer 30" Long 3 - 45W 4HVF18 High Velocity 3 Speed Heavy Duty Tilt Pedestal Fan 3 - 160W 1

160W 240v with Chrome Guard & Black Blades

STF16D

STF12D

HVF18

SCF6

STF9D

STF1

SSF16D

sec020 Desk Ceiling Fans.qxd 12/20/2004 20:42 Page 1

Desk

& C

eilin

g Fa

ns


Oscillating Antique Desk Fan 12" & 16" &Remote Control Fan Diecast Solid Metal to BSEN60335-2

� Available in Chrome � BS EN60335-2, TUV-GS Antique Metal Frame� Size - 12" & 16" Pedestal � Antique Diecast Steel Body - Metal Blade & Guard� Push Bar Switch control mechanism� Oscillating mechanism in centre of the motor guard � 240v - 50Hz 12" (45W) 16” (60W) � 3 Speed On/Off Oscillating � Size - Blade 12," Grill 14", Height 20" approx.� 2 Metres cable & fitted with BSI approved plug

Ceiling Fans Industrial - White Range to BSEN60335-2

� BS EN60335-1, CE � 240v - 50Hz High quality silent motor� Modern design for dissipation or dispersion of heat generated by motor� Heavy gauge metal blades - specially designed to increase the velocity of speedoutput � Metal lower & upper canopy � Hang sure easy and safe ceiling fixingsystem & suspension rod - incorporates anti vibration bobbing � Energy Saving - Can be used in winter to save energy, fan pushes hot airdownward in winter & cooling in summer � Supplied with 8" rod & 5 speed wallcontroller � Special switch for use in the winter to save energy � Available In - 36", 48" & 56" sizes � Rod Length - 18", 24" & 30" (Optional)� 4 colour attractive display packaging

SSAF16 (16" Chrome Antique Pedestal Fans)

� 240v - 50Hz 60W � 16" Pedestal Fan (Heavy Duty ) Antique� 3 Speed On/Off Oscillating � Chrome Base & Grill � Height Adjustment - 42" - 52" approx.) � Size - Blade 16", Grill 18"

Brass Down RodsCode DescriptionDCROD18 Decorative Rod 18"DCROD24 Decorative Rod 24"DCROD30 Decorative Rod 30"

Ceiling Range

Motor Room Code Description Watts RPM Dimensions SizeKN36 36" Ceiling Fan Industrial with Controller 58 365 350x910mm 3x3MtrsKN48 48" Ceiling Fan Industrial with Controller 92 300 353x1220mm 4x4MtrsKN56 56" Ceiling Fan Industrial with Controller 97 275 353x1416mm 6x6MtrsKNROD18 18" KN Series Rod - - 18" -KNROD24 24" KN Series Rod - - 24" -KNROD30 30" KN Series Rod - - 30" -

Decorative Ceiling Fans

� BS EN60335-1, CE � 240v - 50Hz� Dual Rod mounting 200mm or 300mm length to suit most ceilings� Silent & high efficiency motor � 3 Speed Pull-Cord (chain) control� One model can be used with light or without light with the use of an adaptor� Hang sure easy & safe ceiling fixing system� Reversible switch for winter heat saving control� Available In - 42" 3 light or without light 52" 4 light or without light� Colour - Brass with rattan blades or White with wooden stencil� Four colours attractive display packing

Motor Max Code Description Blades Watts Lamps DimensionsDC42B/3L 42" 3 Lights Brass Rattan 45W 180W 420x1056mmDC42W/3L 42" 3 Lights White Stencil 45W 180W 420x1056mmDC52B/4L 52" 4 Lights Brass Rattan 50W 240W 420x1302mmDC52W/4L 52" 4 Lights White Stencil 50W 240W 420x1302mmN.B. DC42 & DC52 Fans with 3/ 4 lights can be easily converted into fan without alight with spare adaptor

Code Description Box/QtySAF12CHR 12" Antique 3 Speed Oscillation 4SAF16CHR 16" Antique 3 Speed Oscillation 3SSAF16CHR 16" Antique Pedestal Fan Floor Standing 2SSF16RM/CHR 16" Remote Control High Spec Pedestal Fan

Automatic Electronic Speed Control Rythmatic Pulse Control 3 Speed c/w 2Hrs - 8Hrs Timer Chrome

SSAF16CHR

SAF16CHR

DC42B

KN36/48/56

DC42B/3L

SSF16RM/CHR


Desk

&Ce

iling

Fans


Portable Air ConditionerPortable Air Conditioner "TUV, GS, CE" Approved

� Cooling Capacity - 12000BTU/Hr 3024Kcal/Hr 3529 Watts� Heating Capacity - 12500BTU/Hr 3150Kcal/Hr 3676 Watts� Consumption Power Ampere for Cooling - 850W/4.2Amps� Consumption Power Ampere for Heating - 960W/4.5Amps� Humidity Removal Capacity - 31.2 Ltrs/Day � Air Volume - 325Mtrs Cube/Hr � Timer - 12 Hours � Speed for Selection - 2 � Compressor - Rotary � Refrigerant - R22 or R407C � Exhaust Pipe - 120x1500mm � Size - 400x377x750mm � Weight - 31 Kilograms � Pallet Quantity - 8 Pieces� Room Size - Approx. 20 Square Mtrs (5x4Mtrs)

Code Description Dimensions (mm)ACP12RC Air Conditioner Portable12000btu 960W Int. 520x330x720

with Remote Control Ext. 450x240x550*Always store in a vertical upright position as unit contains refrigerant gases.

Features

� Our new range of Extractor Fans have a modern design, robust motor and suits mostdecor � Comprehensive range to suit Toilet, Bathroom, Kitchen and Larger Rooms � Extractor Fan 4" and 6" Wall Mounted� Approval CE, VDE EN60335-2 EMC IP44 230v-50Hz Axial Fan (Double Insulation)� Motor:- Protection against over heating with a Thermal Fuse� Body:- ABS (Thermoplastic Construction)

4" 6"Air Velocity 90M3/H 230M3/HPower 11W 29WNoise Level at 1.5Mtrs 39dB 46dBWeight (Kgms) 0.62 1.08

Products Are Sold In Three Version

� Standard Basic Model:- Fan works with a light switch or external switch� Pull Cord Model:- Fan is switched off with a Double Pole Pull Cord Switch fitted in theExtractor Fan� Timer Model:- Fan starts working with a Light Switch Unit Stop operating after a presetnumber of minutes of the light being switched off� Timer Model Adjustment Range:- 2-20 Minutes

Ventilation & Extractor Fans

Humidistat, PIR & 12 Volts Range

� Humidistat Extractor is controlled by a built in Humidistat. It starts when the humidity levelin the room exceed certain preset level and stops operating when the humidity falls below apreset level.� Fan is also equipped with a pull cord switch, humidistat can be overridden with a pull cordswitch for continuous operation. When pull cord switch is placed in the off position, the unit iscontrolled by humidistat.

PIR� This version is equipped with an infra red sensor (PIR) that switches on automatically theextractor fan when a person is detected in the path of the sensor.� 12v - Extractor Fans with Timer:- It is used under the condition when the safety is moreconcern than 240v

Code Description Mounting Timer Dimensions (mm) Box/QtyXF4H 4" Fan with Humidistat Wall Humidity 160x146x125 1XF4HT 4" Fan with Humidistat

with Timer Wall Timer 160x146x125 1XF4PIR 4" Fan with PIR Wall PIR 160x146x125 1FE4T12V 4" Fan 12v with Timer Fan Only Wall Timer 160x146x125 1FE4T12TC Controller for FE4T12V Fan - - - 1

SpigotCode Description Mounting Timer Size Dimensions (mm) Box/QtyXF4S 4" Fan Standard Wall Continuous 98mm 64x154x88mm 6XF4P 4" Fan Pull Cord Wall Continuous 98mm 64x154x88mm 6XF4T 4" Fan with Timer Wall 2-20 Mins 98mm 64x154x88mm 6XF6S 6" Fan Standard Wall Continuous 148mm 230x200x115mm 1XF6P 6" Fan Pull Cord Wall Continuous 148mm 230x200x115mm 1XF6T 6" Fan with Timer Wall 2-20 Mins 148mm 230xzoox115mm 1

XF4P

XF4PIR

ACP12RC


Heat

ing

&Ve

ntila

tion

Ventilation67

Shower Fans 4" & 6" (In-Line Fans)

� Approval CE EN60325 -2 EMC VDE� IP44 230v - 50Hz Inline Fan Double Insulated 4" 6"� Supplied with 1 In-line Fan (4" or 6"), 2 Fixed Grills White 3Mtrs PVC Ducting and 4 CableTies � 2 Version:- Standard with adjustable timer 2-20 Minutes

Air Velocity 90M3/H 230M3/HPower 11W 29WNoise Level at 1.5Mtrs 39dB 46dB

6" Window Fan - Pull Cord

� CE, VDE, BS60335-2 � 29W 240v-50Hz � 230M3/Hour - 46dB 9Noise level) � Timer 2-20mins� Level of the 6" Window Fan are same as 6" Wall Fan but with window kit� Two Version, Pull Cord Manual, Pull Cord Manual with Timer � Glass Thickness:- 4-28mm � Cut Hole Size:- 184-192mm � Size:- 230x200x79mm � Supplied c/w Window Kit

9" And 12" Fan with Automatic Shutter

� CE VDE, EN60335 - 2, EMC � IP44, 230v-50Hz� Exhaust Capacity:- 9" - 620M3/Hour

12" - 1150M3/Hour � Weight:- 9" 3.2Kilograms & 12" 5.5 Kilograms

Wall Mounting Centrifugal Fan

� CE VDE, EN60335-2 EMC � 230v-50Hz-38W � Double Insulated� Cut Hole Size 97mm Size 230x230x122mm

Code Description Mounting Timer Dimensions Box/QtyXSF4S 4" Fan Standard Flat Position Continuous 156x147mm -XSF4T 4" Fan With Timer Flat Position 2-20 mins 156x147mm -XSF6S 6" Fan Standard Flat Position Continuous 156x191mm -XSF6T 6" Fan With Timer Flat Position 2-20 mins 156x191mm -

Cut Hole Code Description Mounting Size Dimensions (mm) Box/QtyXF9A 9" Wall Fan with Automatic Shutter Wall 248 318x280x33 1XF12A 9" Wall Fan with Automatic Shutter Wall 308 380x360x37 1

Code Description Mounting Spiggot Size Dimensions (mm) Box/QtyXCF100 100mm Centrifugal Fan (4") Wall 97mm 230x230x122 1

Glass Cut HoleCode Description Type Thickness Size Size (mm) Box/QtyXF6WIN 6" Manual Pull Cord Fan with Window Kit Pullcord 4-28mm 184-192mm 230x20x79 1XF6WINPT 6" Manual Pull Cord Fan with Window Kit

c/w Timer Pullcord 4-28mm 184-192mm 230x200x79 1

Super Hot Brand Water Heater� Products are made in Europe by ISO9002 Factory High Quality Steel Tank� Made out of Special Steel which is highly resilient to a variety of temperature and water pressures - steel thickness 1.5mmInner Lining Protection� Titanium glass lining fired at 850°C acts as a hygienic guard against rust and corrosionMagnesium Anode� Guaranteed protection against electro-chemical reactionThermal Insulation: - CFC Free� High density Polyurethane (CFC Free) adequate thickness to provide low loss of heat energy (insulation thickness 40mm)� High performance Heating Element � Dual Safety Thermostat

...see page 72

Water Heating Equipment...

WH52/OS

XF6MP

XSF4T KIT

XCF100

XF9A - XF12A

sec021 Heating Ventilation.qxd 12/30/2004 18:10 Page 1

Heat

ing

&Ve

ntila

tion

Ventilation68

Accessories

Heating2kW Radial Fan Heater (Floor Type)FH2 & FH2T

� BS EN60335-2-30, IEC-2-30� Availability - FH2T (with thermostat) & FH2 (without thermostat)� Design - Radial floor type 1kW 2kW, for instant heating, cold air� Voltage - 230/240v - 50Hz double insulated � Material - Insulated self extinguishing � Protection - Thermo Guard protected - switches the heater element off in the event of overheating � Colour - Grey body with Black front grill to suit all decors � Adjustable for directional heating � 2Mtrs cable and fitted with BSI approved plug

Fan Heater - HL190� 3kW Midi Axial Fan Heater - (Upright type) � BS EN60335-2� Overheating safety cut-out for motor protection� Cold Air - 1000W, 2000W & 3000W � Colour - Grey � Thermostat with anti frost position and pilot light� Body - Robust thermoplastic construction self extinguishing� Voltage - 240v - 50Hz � Dimensions - 250x230x130mm

2.4kW Pull Cord Bathroom Down-flow Fan Heater BFH24P

� BS EN60335-2, EMC, LVD � 2.4kW 240v - 50Hz � 2 built-in safety cut-outs� Built-in step down thermostat automatically reduces to 1.2kW for economy and comfort � Neon indicator to show "On" position � Wall Mountable - with bracket which is fitted to heater � Streamline low profile design - compact size� 3 years warranty � Colour - White � Dimension LxWxH - 205x210x130mm � Carton quantity - 6

Code Description Dimensions (mm) Type Colour CartonFH2 2kW without thermostat 260x190x95 Floor/Radial Grey - Black Grill 6FH2T 2kW with thermostat 260x190x95 Floor/Radial Grey - Black Grill 6FH2TM 2kW with thermostat - Metal 260x190x95 Floor/Radial Grey - Black Grill 6HL190 3kW with Thermostat 250x230x130 Upright Axial Grey Colour 6BFH24P 2.4kW Bathroom Fan Heater 205x210x130 Wall Mounting White 6BHL750 750W Bathroom Heater

with 100W ES Heat Light - Ceiling Chrome 1UFH2T/OSC Fan Heater Upright 2kW OSC

+ Stat Oscillating - Upright Off White 6

Fixed Grill Dimensions Hole SizeCode Description Size (mm) (mm) Colour Box/QtyXFG4* Fixed Grill 4" 140x140x54 103 White/Brown/Grey 10XFG6* Fixed Grill 6" 174x174x56 153 White/Brown/Grey 10

Gravity Grill Dimensions Hole SizeCode Description Size (mm) (mm) Colour Box/QtyXGG4* Gravity Grill 4" 140x140x54 103 White/Brown/Grey 10XGG6* Gravity Grill 6" 174x174x56 153 White/Brown/Grey 10

Window Kit Dimensions Hole SizeCode Description Size (mm) (mm) Colour Box/QtyXWK4FS Window Kit Fixed Shutter 4" 164x154 128-135 White 1XWK4GS Window Kit Gravity Shutter 4" 164x154 128-135 White 1XWK6FS Window Kit Fixed Shutter 6" 230x200 184x-192 White 1XWK6GS Window Kit Gravity Shutter 6" 230x200 184-192 White 1

Flexible Ducting LengthCode Description Mtrs Material Size Colour Box/QtyXD43P 4" PVC Ducting 3 PVC 4" White 48XD63P 6" PVC Ducting 3 PVC 6" White 24XD4AL 4" Aluminium Ducting 0.32 Aluminium 4" Silver 48XD6AL 6" Aluminium Ducting 0.32 Aluminium 6" Silver 24*Please ad colour as suffix e.g. XFG4W - W = White, G = Grey & B = Brown

UFH2T/OSC

BHL750

XD43P

FH2T

FH2M

FH2

XGG4

XD4AL

HL190

BFH24P

XFG4

XGG6


Heat

ing

&Ve

ntila

tion

Heating69

2kW Convector Wall/Floor Dual Purpose Heater - HC2D 2kW Convector Heater with Turbo Fan - HC2TF

� Approval - CE TUV-GS � Wall/Floor standing � 3 heat setting switch 750W 1250W & 2000W � Thermostat - Adjustable thermostat to select and maintain the desired temperature � Anti frostprotection � Voltage - 240v - 50Hz � Safety cut-out to protect against element overheating � Neonindicator to show "On" position � Body - White with Grey side panels, grill & feet to suit all modern décor� Packing - 4 colour packing carton � Carton quantity - 4 � Fitted with BSI approved plug � Clearsafety switch cover to prevent accidental switching � Turbo fan heater version available - (HC2TF)� Dimension LxWxH - 730x450x200mm approx.

Heat Master Range

High Level Heater - HLH3� Approval - BS EN60335-2, CE. EMC� Provides heat to precise location where it is required by means of swivel bracket � Voltage - 240v - 50Hz � Output - 3kW� Mounting - Wall bracket for angle mounting � 3 position selection off, fanor heat � PTC - Safety overheat cut-out � Suitability - Shops, hotels,offices, warehouses, & factories (mounted on doorways to counteract thedraught) � Colour - Soft Grey (RAL7035)

Code HLH3Type 3kW High Level HeatAir/Velocity 180M3/HNoise Level dB 50Fixing Centre 408mmDimensions LxWxD 432x172x105mmBox/Qty 1

Low Level Heater (Wall Mounting Commercial) - LLH3� Approval - BS EN 60335-2, CE, EMC � Voltage - 240v - 50Hz� Output - 1, 2, 3kW or Cold Air with rotary thermostat control� Mounting - Not to exceed 300mm from floor level� Colour - Light Grey leather grain metal front with black grill - complimentedby teak surround � Ideal for domestic or commercial applications

Code LLH3Type 3kW Low Level HeatAir/Velocity 120M3/HNoise Level 54dBFixing Centre 470mmDimensions LxWxD 615x280x105mmBox/Qty 1

Bathroom Towel Rails to BSEN60335-2

Code Description Dimensions (mm) Box/QtyTRS60WHI Towel Rail S Shape 60W Wall Mounting White 560x520 1TRS60CHR Towel Rail S Shape 50W Wall Mounting Chrome 560x520 1TRW80WHI Towel Rail Dual (Wall or Free Standing) 80W White 800x550 1TRW80CHR Towel Rail Dual (Wall or Free Standing) 65W Chrome 800x550 1

Code Description Colour Dimensions (mm) Box/QtyHC2D 2kW Wall/Floor Dual Purpose Convector White/Grey 730x450x200 4HC2TF 2kW Wall/Floor Turbo Fan Heater White/Grey 730x450x200 4HC2TIM 2kW Wall/Floor Turbo Fan Heater with Timer White/Grey 730x450x200 4

3kW Convector Heater HC3� BEAB approved, CE � 3 Heat output � Variable thermostat - frost protection setting � Automaticsafety cut-out � Floor or wall bracket

Code Description Colour Dimensions (mm) Box/QtyHC3 3kW Convector Heater White with 730x440x190 -

with Thermostat (floor/wall) Grey Grill

HC2TF

LLH3

HLH3

HC2D

TRS60CHR - TRC80CHR


Split

Lev

el H

eatin

g

Heating70

Warm Air Curtain (Door Screen Heater)� Approval - BS EN60335-2, CE, EMC � Voltage - 240v - 50Hz � Key hole "Drop IN Fixing"� Mounting - 2-3Mtrs from floor surface � 3 position selection off, fan or heat � Colour - 3kW - Grey or 4.5kW - Grey withBlack end caps � PTC - Safety overheat cut-out � Ideal for over doorway� Suitability - Shops, hotels, offices, warehouses, & factories (mounted ondoorways to counteract the draught)

Code WAC3Type 3kW Warm Air CurtainAir/Velocity 220M3/HNoise Level 50dBFixing Centre 460mmDimensions LxWxD 552x172x105mmBox/Qty 1

Code WAC45Type 4.5kW Warm Air CurtainAir/Velocity 225M3/HNoise Level 56dBFixing Centre 557mmDimensions LxWxD 610x220x105mmBox/Qty 1

Frost Watch Heater� Approval - BS EN60335-2, CE � Voltage - 240v - 50Hz � Output - 500W � Suitability - Small room, garage, caravan, hobby room, greenhouses, conservatories and Lofts � Mounting - Wall mounted � Thermostat - 5° min to 30°C max with safety thermalcut-out to avoid overheating and pilot light to show appliance is switched "on" � Colour - Light Grey

Code FW500Type 500W Frost WatchColour Light GreyDimensions LxWxD 290x255x115mmBox/Qty 1

Plinth Heater Kitchen & Bathroom

Code PH24Description Plinth Heater 2.4KW (Minimum Depth 250mm)Dimensions 435x120x222(mm)Rating IP22Origin UK

Infra Red Bathroom Heater - Quartz� Approval - BS EN60335-2, CE, NEMKO� Voltage - 240v - 50Hz � Output - 1200W (2 Bar) or 1800W (3 Bar)� Mounting - Unique system allows installation of the switch housing in asymmetrical way to either the left/right hand side of the heater� Colour - Chrome steel body - Black switch housing with pull cord switch� Adjustment - Body can be adjusted for directional heating to the point whererequired

Code IRH1200Description 1200W 2 Bar Pull Cord Infra Red Bathroom HeaterColour Chrome/BlackDimensions LxWxD 110x630x183mmBox/Qty 1

Code IRH1800Desscription 1800W 3 Bar Pull Cord Infra Red Bathroom HeaterColour Chrome/BlackDimensions LxWxD 110x630x183mmBox/Qty 1

Code IREDescription Spare Element

ID2BAR

PH24

WAC45

WAC3

IRH1200

FW500

2 Bar Radiant Fire (1600W)� BS EN60935-2, EMC, LVD� Colour - White with Chrome guard � Ribbed reflector for maximum heat radiation� 2 heat settings - 1 switch � 230/240v - 50Hz 1600W - 1800W � Sturdyconstruction with carry handle

Code Description Dimensions LxWxH WattageIDL2BAR 2 Bar Radiant Heater 300x260x270mm 1800WIDLBAR Spare Element - -


Ligh

t & H

eatin

g

Heating71

*All Seamless Steel Tube with Heat Sensitive Cut-out, Enamel Finish c/w Mounting Brackets.

2kW Column Oil Filled Radiator (CR2 & CR2T)� TUV-GS, CE � 3 years warranty � 230-240v 50Hz� Adjustable thermostat - frost protection � Wide base for increased stability -colour White � Convenient handle and easy glide caster make moving easy� 3 Heat settings 750W, 1250W or 2000W

Kettles

Infra Red Heaters

Code Description Dimensions (mm)IHH15 Infra Red Halogen Heater 1.5KW 435x140x310IHH30 Infra Red Halogen Heater 3KW 435x140x570

Tubular Heaters� CE approved � Low power consumption, prevents condensation and fitted withheat sensitive cut-out � Colour - White enamalled finish � Body - Quality seamlesssteel tube with enamelled finish, supplied with mounting brackets � Voltage - 240v - 50Hz � Application - Garages, conservatories, cloakrooms andshop windows

Code Description Wattage WeightTH1 1’ Tubular Heater 45W 0.5kgmsTH2 2’ Tubular Heater 80W 1.0kgmsTH3 3’ Tubular Heater 135W 1.5kgmsTH4 4’ Tubular Heater 180W 2.0kgmsTH5 5’ Tubular Heater 225W 2.5kgmsTH6 6’ Tubular Heater 270W 3.0kgms

Tubular Heaters

Code Description OriginTH1G Guard Tubular Heater 1ft UKTH2G Guard Tubular Heater 2ft UKTH4G Guard Tubular Heater 4ft UKTHILK Tubular Heater Inter-linking Kit UK

Stainless Steel Kettles

Code Description Colour Box/QtySAK2 Stainless Steel Kettle 1.7Ltrs Steel 12SAK3 Stainless Steel Kettle 3Ltrs Steel 6SAK5 Stainless Steel Kettle 5Ltrs Steel 6

Code Description No. of Fins Heat Setting Dimensions WeightCR2 2kW Column Oil Filled Radiator 9 3 60x17x67cm 18KgmsCR2T 3kW Column Oil Filled Radiator with Timer 9 3 60x17x69cm 19KgmsCR15 1.5kW Column Oil Filled Radiator 7 3 41x16x69cm 11Kgms

CR2

SAK2

SAK3

IHH15

THG

CR2T

TUBULAR HEATERS


Wat

er H

eatin

g

Heating The Water72

FeaturesSuper Hot Brand Water Heater� Products are made in Europe by ISO9002 Factory High Quality Steel Tank� Made out of Special Steel which is highly resilient to a variety of temperature

and water pressures - steel thickness 1.5mmInner Lining Protection� Titanium glass lining fired at 850°C acts as a hygienic guard against rust and

corrosionMagnesium Anode� Guaranteed protection against electro-chemical reactionThermal Insulation: - CFC Free� High density Polyurethane (CFC Free) adequate thickness to provide low loss

of heat energy (insulation thickness 40mm)� High performance Heating Element � Dual Safety Thermostat

A) Provides automatic power cut off in the event of over heatingB) Cuts out operation in case there is a failure of the main thermostat

Available in 5L, 10L and 15L Over-Sink and Under-Sink for use on Holiday,Homes, Camps, Caravan, Offices, Shops, Restaurants, Hotels, Bars, Clubs,Garages and Service Stations etc

� 5L - 2Kw, 10L and 15L in 1.2Kw � For Under-Sink use normal tap � For high pressure, use pressure release valve and expansion vessels� Over-Sink supplied with Spout and Valve� Full One Year Gurantee

Water Heaters Range "BSEN" "VDE" Approved

Oversink - Single Point Storage Heater - Super Hot Range

� CE, WRC, NAMAS approved � Capacity - 5L 2kW or 10L 1.2kW� Temperatures adjustment - 35° to 80° with thermostat� Tank - Polypropylene approved to 40PSI� Connection - Mains water supply or cistern fed with minimum head of 5Mtrs� Water feed - 15mm copper tube� Electrical - connection to double pole isolator switch required� Casing - Plastic impact resistant with CFC free insulation� Featuring - Over temperature safety cut-out rated at 125°C� Supplied with 300mm long spout and valve - available in 2 versions 5L - 2kW and

10L - 1.2kW

Water Heating Equipment

Water Heaters Multi Point (Unvented)

� CE, WRC, NAMAS approved � Capacity - 5L, 10L, 15L - 2.2kW� Element - Rod type embedded � Temperature Adjustment - 20° - 75° withthermostat � Water Tank - 1.8mm enamelled steel tested to 12 Bar � Casing - White plastic corrosion resistant � Safety - Manually resetable safetycut-out pressure release valve � Mounting - Vertical wall or floor standing� Plumbing - Expansion safety valve required at 6 bar 1/2" BSP water connectionrequired � Electrical - Double pole switch with 3mm contact gap � Hot water to one or more outlets using standard conventional tap or mixer� Colour - White

Code Description OriginWH52/OS 5 Litre 2kW Oversink Water Heater c/w Spout

& Inlet Water Tap ECWH102/OS 10 Litre 1.2kW Oversink Water Heater c/w Spout

& Water Inlet Tap ECWH152/OS 15 Litre 1.2kW Oversink Water Heater c/w Spout

& Water Inlet Tap EC

Code Description OriginWH52/US 5 Litre 2kW Undersink Water Heater c/w Special

Expansion Valve ECWH102/US 10 Litre 1.2kW Undersink Water Heater c/w Special

Expansion Valve ECWH152/US 15 Litre 1.2kW Undersink Water Heater c/w Expansion

Valve EC

WH52/US

WH52/OS

WH102/US

EXPANSION TANK

EXPANSION VALVE

INLET TAP

SPOUT

sec022 Water Heating Equipment.qxd 12/29/2004 14:47 Page 1

Boiling The Water73

Wat

er H

eate

ring

GS3000 Shower - Deluxe

� 8.5kW 2 Years Guarantee � Temp 240v Stabilised for Absolute Comfort� Power Selector Offer Cold, Low and High Temperature � Single Push Button Start/Stop Water Flow Control � Auto Reset Display � Neon Indicator Control Dial� Multi mode handset provides 5 different position� 530mm (Handset Adjustment) � Flexible Hose 1.25Mtrs� Detachable soap dish fir easy cleaning � Colour White

Immersion Heater Spanner - Flat

� Zinc plated flat spanner - octagonal shape with long handle� Zinc plated pressed steel

Immersion Heaters/Stats to BSEN60730-2 BEAB Approved

� New Range with safety cutout � BEAB approved � Output - 3kW 15Amp � Voltage - 240v - 50Hz � Immersion heater made from standard copper � Individually boxed � Sizes - 11", 14", 18", 23”, 27", 30" & 36"� Stats - BS EN60730-2 - 7", 11", 18" 15Amp 250v (suitable for top or side entry)� Stat with preset level 60°

GS1000 Shower

� CE, 2 Years Guarantee � 8.5kW 240v� Temp Stabilised for absolute comfort� Power Selector Offer Cold, Low and High Temperature � Neon Indicator to show power is on � Single Control for Stop Start and Temp Adjustment � Handset Adjustment 530mm � Flexible Hose 1.25Mtr � Manual Start/Stop � Colour - White

Code Description OriginGS1000 8.5kW Shower c/w Prima Shower Fitting

Manual Start/Stop UKGS3000 8.5kW Shower c/w Shower Fitting with 5 Spray

Options/T80 UK

3kW Instant Water Heater (Over Sink)

� 3kW 240v � 200mm Swivel Arm � Operated by Single Temperature Control � Dimension 220(H)X 75(D)X167(W) � Ideal for Domestic and Commercial use� Colour - White

Code Description DimensionWHI3 3kW Instant Water Heater c/w 200mm Long Spout 220x75x167mmN.B. Operate only minimum water pressure - 6PSI

Code Description Wattage Stats OriginIH11SC* Immersion Heater 11 Inch 3kW Copper 7" UKIH14SC* Immersion Heater 14 Inch 3kW Copper 7" UKIH18SC* Immersion Heater 18 Inch 3kW Copper 11" UKIH23SC* Immersion Heater 23 Inch 3kW Copper 23” UKIH27SC* Immersion Heater 27 Inch 3kW Copper 18" UKIH30SC* Immersion Heater 30 Inch 3kW Copper 18" UKIH36SC* Immersion Heater 36 Inch 3kW Copper 18" UKIHS7ST Immersion Heater Stat 7 Inch 250v 15A Top/Side Entry UKIHS11ST Immersion Heater Stat 11 Inch 250v 15A Top/Side Entry UKIHS18ST Immersion Heater Stat 18 Inch 250v 15A Top/Side Entry UK*Complete with Thermostat & Safety Cut-Out.

Code DescriptionTLISF Immersion Heater Spanner Flat

IH14SC

GS3000

GS1000

IH27HC

TLISF

IHS7ST

WHI3


Heat

ing

Cont

rol

Controlling The Heat74

Heating Control Timers HORC17 & HORC27

� Centaur plus single & two channel heating programmes leading technology at an affordable prices

� Plug in replacement for other manufacturer models 24hour5 and 7day5 options � 3 on/off position a day� Hot water boast and central heating advance programme options:-on, off, all day

and auto mains powered with battery back up� C17:- single channel, 7 day suitable for combi boiler � C27:- two channel 7 day suitable for central heating and hot water

Electronic Programmable Timer HORH27, HORH37

� 3 channels means control of hot water upstairs & downstairs (independent)different zone H37� 2 channels control hot water and central heating 2 zones only� Power Supply - 230-240v - a.c. � Contact - Micro Gap change over 3Amp� Range - 0 - 55°C � Battery Reserve - 10 months � Time Adjustment - 10 mins � Override - Boost 1 or 2 hrs instant advance� 3 On/Off period 24 hrs � Programme Option - All day, on constant, auto off & on holiday with suspendfunction programmable up to 30 days� Supplied with British Gas standard wall plate for easy conversion� Bubble pack for display � Orgin UK

Horstmann HOR425D

� BEAB approved � Hot water & central heating programmer� Electro-Mechanical programme - easy to set� Motor - Synchronous double insulated� Dial Setting - 2 on tappet (Pins) 2 off tappets - minimum On/Off period 45 mins� Override - Advanced indicator allows temporary override without altering setting

with Neon indicator to show "switched on position"� Colour - Dark Grey plate, White/Black box� Dimension LxWxD - 152x107x39mm

Horstmann - Immersion Heating Controller Economy 7 (Quartz) Timer HOR E7Q

� BEAB approved� Voltage - 13Amp 240v 50Hz - suitable for immersion heaters up to 3kW� Contact - Micro Gap double pole isolator switch� Battery Reserve - Stand by battery up to 150 hrs in case of mains failure� Isolator Switch - Double switch isolate the immersion heater leaving the clock

running� Off Peak - Adjustable between 4 1/2 & 7 hrs� Boost - 0 - 60 mins boost means extra hot water any time� Reliable and accurate quartz controlled� Dimensions - 170x115x56mm WxHxD

Heating Controllers

Code Description Dimensions (mm)HORE7Q Heating Control Timer "Economy 7"

1Hr Boost BEAB 150 Hrs Battery 170x115x56HORH27 Programme 2 Channel 7 Day 10 Month Battery 152x107x35HORH37 Programme 3 Channel 7 Day 10 Month Battery 152x107x35HOR425D Electro-Mechanical Timer Twin Circuit BEAB

Control Heating & Hot Water Programme 152x107x39

Code Description Channels Days Origin SUitable ForHORC17 Programmer 1 Channel 7 Day for Combi Boiler - Budget Range 1 7 UK Combined BoilerHORC27 Electronic 2 Channel - 7 Day Heating/Hot Water - Budget Range 2 7 UK Central Heating And Hot Water

230v-50Hz 3 settings per day - Budget Range

HORC17

HOR425D

HORC27

HORH37

HORE7Q


Controlling The Heat75

Heat

ing

Cont

rol Cylinder Stat

� CE, IP30� 240v - 50Hz 2Amp� Range - 5-85°C differential 7°C approx.� Switch - Single Pole double throw� Supplied with 1.5mm2 3 core heat resistant cable & flexible fixing cord � Colour - White� Dimensions - 95x30x34mm (knob 9mm)

Room Thermostat

� IP20, CE � Range - 5° - 30°C Compact Size � 16Amp 240v - 50Hz AC � Differential - 0.4°C - to be mounted 1.5Mtrs above the floor� Bi Metallic contact for make & Brake � Switch Type - Single pole single throw� Colour - Light Cream to suit all decor � Size - 74x74x30mm (plus knob 8mm)

Central Heating Junction Box

� CE � 24 Way most versatile junction box � Facility for live, neutral & earth � Suitable for most programmers � Complete instructions supplied

Shower Units

Code Description OriginSHO50 Shower Unit 50Amp RCBO MCB/RCB Combined

Code Description Dimensions (mm) OriginRTS Room Thermostat 16Amp 240v 3 - 60° 74x74x30 ECCTS Cylinder Thermostat 3Amp 240v 3 - 80° 95x30x34 ECJB Central Heating Junction Box 24 Way 175x112x33 ECCH322MPV 5 Position Value 22mm - -

JB

CTS

CH322MPV

SH050

RTS

Our Sales Team Contact our team of friendly, experienced and dedicated personnelready to provide you with a high quality service through ourTelephone Hot-lines:-

� Service Excellence� Customer Satisfaction� Value For Money

...Call Today

A Single Source For Electrical Products...

Website. www.ced-elec.co.uk - Email. [email protected]

Telephone 020 8503 8500

Facsimile 020 8503 8900


eddie

Rectangle

eddie

Typewritten Text

www.jendee.co.uk

Hand

Dry

ers

Professional Hygiene Solutions76

Features

A wide selection of hand dryers to suit all kinds of applications, economically pricedmodels are sold with inductive motors, whilst for the more demanding environmentsand applications there is a selection of heavy duty non-inductive motors. We stockboth Push-Button and Automatic versions enabling you to pick the model that bestsuits your particular needs, all units are stylishly designed to compliment any existingdecor.

Supplied in Polycarbonate, Sheet Steel and Diecast body. Ideal for use in departmentstores, shopping malls, railway stations, motorway service areas, schools, hospitals.Sports & leisure centres, laboratories, office complexes, factories, restaurants,hotels, kitchens, pubs & clubs, In fact the list is endless.

Providing:-� Economy - The cost of towel hand drying is approximately 4 times moreexpensive than hand dryer systems. There are no staff costs involved as in atraditional towel system as there is refilling and maintenance required.� Hygiene - Hand dryer systems are more hygienic as there is no mess of dirty andcostly paper, linen or towels lying around until collection or disposal.� Comfort - Providing an upgraded working environment through a more efficientand hygienic solution for your hand care requirements.

Recommended installation height - Men 120cm, Ladies 115cm, Children 82cm(Measured from the base of the unit to the floor)

Vandal Resistant HD1 & HD1A Hand DryersEconomy Range Pressed Steel to BSEN60335-2 "CE" Approved

� BS EN60335-1-2, UL, CSA � Low budget - Vandal resistant� Colour - White Body, Chrome Nozzle and Push Button� Body - Robust sheet steel construction, enamelled to the highest standards� Motor - 100W (inductive) � Air Velocity - 170CM3 / Hour � Element - 1750W� Voltage - 220/240v - 50Hz � Timer - 40 secs - (electronic adjustable) � Weight - 6.3kgm � Dimensions - 265x200x255mm � Guarantee - 1 Year � Automatic - Incorporates Infra-Red sensor

Hand Dryers

HD2000A & HD2000P Hand Dryers - Polycarbonate

� BS EN60335-1-2, VDE, GS, CE � Low budget price - most economical� Colour - White Body, Grey colour Push Button � Body - Polycarbonate ABS easy clean (approx. 3mm thick) vandal proof � Motor - 140W (Inductive) � Air Velocity - 168CM3 / hour � Element- 1650W � Voltage - 220/240v - 50Hz � Timer - 45 secs approx. � Weight - 3.5kgm � Dimensions - 300x250x130mm � Guarantee - 2 years

HDM22 & HDM22A Hand Dryers - Aluminium Hand & Face

Diecast aluminium heavy duty vandal resistant body for durability, suitable for handand face. Simple but elegant, designed to enhance all interiors and compliment mostdecors with smooth finish easy wipe clean.

� BS EN60335-1-2, VDE, CE, UL and all European approvals � Powerful quiet inductive motor for efficient performance� 2 versions available - HDM22 (Push-Button) & HDM22A (Automatic)� Automatic - Infra-Red proximity sensor for 100% hygiene� Saves electricity as hands approach and are withdrawn the unit power isautomatically switched on and off � Tough to resist everyday knocks and scratches � Easy to fit - supplied with fitting kit and instructions� Colour - White Body, Heavy Duty Chrome Nozzle � Warm Air Temperature - 60°C� Element - 2000W � Voltage - 220/240v - 50Hz � Timer - Adjustable 30-60 secs � Airflow - 110CFM/H (32cm3/min) � Weight - 6kgm � Dimensions WxHxD - 265x200x255mm� Guarantee - 1 Year

Code Description Dimensions (mm) Box/QtyHD2000A Auto Hand Dryer Polycarbonate 1.8kW VDE 300x250x130 6HD2000P Hand Dryer Push Button Polycarbonate 1.8kW 300x250x130 6

Code Description Dimensions (mm) Box/QtyHD1 Push Button Hand Dryer 1.6kW BS3456 Pressed Steel 265x200x255 4HD1A Hand Dryer Auto 1.6kW BS3456 Pressed Steel 265x200x255 4N.B. HD1 & HD1A are for Light Duty use only - not suitable for busy public areas.

Code Description Dimensions (mm) Box/QtyHDM22 2000W Push Button - Diecast Aluminium 265x200x255 4HDM22A 2000W Automatic - Diecast Aluminium 265x200x255 4

HDM22A

HD2000P

HD1A

HD1

HDM22

HD2000A

sec023 Hand Dryers.qxd 12/28/2004 19:16 Page 1

Fly

Kille

rs

Professional Hygiene Solutions77

FK6 - 10W Fly Killers Domestic TUV GS BSEN60335-2

� BS EN60335, (TUV-GS) EMC CE � Voltage - 230v -50Hz a.c. � Colour - Black finish � Effective Coverage Area - 5Mtrs2

� Grid Voltage - 1100V d.c. � Mounting - Free standing or ceiling mounted � Lamp - 10W - UV lamp � Suitability - Indoor use only � Dimensions HxD - 315x133mm

Bug Master Fly Killer Industrial 20W - 40WSuitable for Wall/Ceiling Mounting4000v Grid voltage (VDE Approved Transformer)

� BS EN60335 � Body - All metal construction for longer life � Colour - White � Voltage - 240v - 50Hz a.c. � Transformer - VDE approved � Fuse protection - 2Amp � Grid Voltage - 4000v high voltage grid, high quality lamps � Dual Wall/ceiling mounted� Suitability - Food factory, restaurants, bars & cafes, hospitals, chemists, supermarkets, fast food &butchers etc.

Fly Killers Domestic/IndustrialCED provide a range of domestic and industrial Fly Killers to suit mostdecors. Our heavy duty industrial BUGMASTER range are constructedfor longer life and come in a stylish White finish.

E88 & E88A Heavy Duty Hand/Face Dryers (Made In EC) Porcelain Enamelled 2mm Thick Steel VDE "CE" Approved

� BS EN60335-1-2, VDE CE� Colour - White rugged (tough) to take everyday knocks and scratches, nozzle & push button (Chrome)� Body - Porcelain enamelled steel case (approx. 2mm thick) virtually vandal proof� Motor - 250W powerful & quiet (non-inductive) 5500RPM� Air Velocity - 90kM/Hour 280CM3/Hour � Element - 2200W � Voltage - 220/240v - 50Hz 11Amp� Timer - 34 secs - Ultra high turbo drying for world beating performance � Weight - 8.0kgm� Dimension WxHxD289x244x168mm � Guarantee - 1 Year

E88C & E88AC Hand/Face Dryers - Chrome (Made In EC) VDE "CE" Approved

HD1800A Polycarbonate Automatic

� TUV-GS, EMC, CE, EN60335-2 (Double Insulated) � Voltage -240v-50Hz Wattage 1800W� Low Budget Price Automatic, Drip Protection Polycarbonate Body, Easy To Clean � Colour - White� Auto Power Off after 1 min continuous working adjustable sensor (Timer)� Overheat Thermal Cut Out Protection � Fixing Hole Top 136mm � Fixing Hole Bottom 192mm � Dimension:- 274(H) X262 (W) X196 (D) � Weight:- 2.6kilogram � Noise Level:- 1Mtr - 65dB

HD2400A Heavy Duty Automatic Metal Hand Dryer

� TUV-GS, EMC, CE, BSEN 60335-2 � Voltage 240v -50Hz � Wattage 2400W � Automatic Drip Proof � All Metal Heavy Duty Aluminium Cover, Steel Base, All Air Outlet Construction Sleep Motor � Colour -White � Over Heat Thermal Cut Out Protection � Auto Power Off 1 Min continuous working adjustablesensor � Fixing Centre Top & Bottom:- 212mm � Dimension:- 265(H) x 243mm (W) x 160mm (D)� Noise Level at 1Mtr - 65dB

Automatic Hand Dryers - Budget Range

Code Description Dimensions (mm) Box/QtyE88 Heavy Duty Rugged Push Button 2.2kW VDE Hand/Face 289x244x168 4E88A Heavy Duty Rugged Auto 2.2kW VDE Hand/Face 289x244x168 4

Code Description Dimensions (mm) Box/QtyE88C Heavy Duty Push Button 2.2kW VDE Hand/Face Chrome 289x244x168 4E88AC Heavy Duty Auto 2.2kW VDE Hand/Face Chrome 289x244x168 4* Stainless Steel versions available to order.

Code Description Dimensions (mm) Box/QtyFK6 Fly Killer 10W Effective Range 5Mtr2 315x133 6N.B. For spare lamps please quote FK6L

Code Description Dimensions (mm) Box/QtyHD1800A Hand Dryer Polycarbonate Automatic 1.8KW 274x262x196 4

Code Description Dimensions (mm) Box/QtyHD2400A Heavy Duty Hand Dryer Automatic Diecast 2.4KW 265x243x160 2

Effective DimensionsCode Description Coverage Area Lamp Type LxWxHFKI20WHI 20W Fly Killer 2x10W 80Mtrs3 2x10W (FKI10L) 365x130x300mmFKI30WHI 30W Fly Killer 2x15W 120Mtrs3 2x15W (FKI15L) 480x130x330mmFKI40WHI 40W Fly Killer 2x20W 160Mtrs3 2x20W (FKI20L) 620x130x365mm

Code DescriptionFK6L Fly Killer Tube 10W for FK6FKI10L Fly Killer Tube 10W for FKI20WHIFKI15L Fly Killer Tube 15W for FKI30WHIFKI20L Fly Killer Tube 20W for FKI40WHI

Replacement Tubes

HD2400A

E88A

FKI20WHI

E88C

FK6

HD1800A

E88

sec023 Hand Dryers.qxd 12/28/2004 19:17 Page 2

Cond

uit F

ittin

gs M

etal

Boxing Clever78

Circular Boxes Malleable

� Made to BS4568 � Available in sizes 20mm & 25mm � Supplied in two finishes - Black Enamel or Galvanised � Material - Malleable Iron (unless stated)� Dimensions - 60.3mm Internal diameter x 25.4mm Deep � Tapped Thread - M4 size screws � Lid Fixing Centre diameter between 2 holes 50.3mm � Tapped hole in the base for earth screws � Supplied without lid & screws � Box/Qty - 10

Dimensions - Type HxWxD Fixing Centre1G 86x86x9mm 60.3mm2G 86x146x9mm 120.6mm

Conduit Fittings Metal

MALLEABLE CIRCULAR BOXES

20mm Boxes

CodeCode Black Galvanised Enamel Description Colour Box/QtyCF201G CF201B 20mm 1 Way (Terminal) Box BE/Galv 10CF202G CF202B 20mm 2 Way (Through) Box BE/Galv 10CF203G CF203B 20mm 3 Way (Tee) Box BE/Galv 10CF204G CF204B 20mm 4 Way (Intersection) Box BE/Galv 10CF20AG CF20AB 20mm Angle Box BE/Galv 10CF20UG CF20UB 20mm "U" 2 (Branch) Box BE/Galv 10CF20YG CF20YB 20mm "Y" 3 (Branch) Box BE/Galv 10CF20HG CF20HB 20mm "H" Twin Through Box BE/Galv 10

Tangent Boxes

Code Black Galvanised Enamel Description Colour Box/QtyCF202TG CF202TB 20mm Tangent Through Box BE/Galv 10CF203TG CF203TB 20mm Tangent Tee Box BE/Galv 10CF20ATG CF20ATB 20mm Tangent Angle Box BE/Galv 10

25mm Boxes

Code Black Galvanised Enamel Description Colour Box/QtyCF251G CF251B 25mm 1 Way (Terminal) Box BE/Galv 10CF252G CF252B 25mm 2 Way (Through) Box BE/Galv 10CF253G CF253B 25mm 3 Way (Tee) Box BE/Galv 10CF254G CF254B 25mm 4 Way Box BE/Galv 10CF25AG CF25AB 25mm Angle Box BE/Galv 10CF25UG CF25UB 25mm "U" 2 (Branch) Box BE/Galv 10CF25YG CF25YB 25mm "Y" 3 (Branch) Box BE/Galv 10CF25HG CF25HB 25mm “H” 4 Branch Box BE/Galv 10

Loop-In Boxes 1 Hole - 4 Hole

Code Black Galvanised Enamel Description Colour Box/QtyCF20L1G CF20L1B 20mm Loop-In 1 Hole BE/Galv 10CF20L2G CF20L2B 20mm Loop-In 2 Hole BE/Galv 10CF20L3G CF20L3B 20mm Loop-In 3 Hole BE/Galv 10CF20L4G CF20L4B 20mm Loop-In 4 Hole BE/Galv 10

Extension Boxes

CodeCode Black Galvanised Enamel Description Colour Box/QtyCF201EBG CF201EBB 20mm Terminal Extension Box BE/Galv 10CF202EBG CF202EBB 20mm Through Extension Box BE/Galv 10CF20AEBG CF20AEBB 20mm Angled Extension Box BE/Galv 10CF203EBG CF203EBB 20mm Tee Extension Box BE/Galv 10

Back Outlet Box

Code Black Galvanised Enamel Description Colour Box/QtyCF20BOG CF20BOB 20mm Plain Back Outlet Box BE/Galv 10CF201BOG CF201BOB 20mm Terminal Back Outlet Box BE/Galv 10CF202BOG CF202BOB 20mm Through Back Outlet Box BE/Galv 10

Extension Ring (Steel)

Code Black Galvanised Enamel Description Colour Box/QtyCF16ERG CF16ERB 16mm Extension Ring BE/Galv 10CF20ERG CF20ERB 20mm Extension Ring BE/Galv 10CF25ERG CF25ERB 25mm Extension Ring BE/Galv 10CF32ERG CF32ERB 32mm Extension Ring BE/Galv 10Extension rings are only supplied in mild steel naterial.

sec024 Conduit Fitting Metal.qxd 12/29/2004 14:57 Page 1

Cond

uit F

ittin

gs M

etal

Boxing Clever79

Conduit Fittings - Accessories

INSPECTIONELBOWS

INSPECTION TEES

NORMAL BEND

STEEL CONDUIT FITTINGS

CONDUIT FITTINGS

Couplers - Steel

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20CG CF20CB 20mm Coupler BE/Galv 100CF25CG CF25CB 25mm Coupler BE/Galv 100CF32CG CF32CB 32mm Coupler BE/Galv 100CF1.5CG CF1.5CB 1.5" Coupler BE/Galv 50CF2CG CF2CB 2" Coupler BE/Galv 20

Locknuts - Steel

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20LNG CF20LNB 20mm Locknut BE/Galv 100CF25LNG CF25LNB 25mm Locknut BE/Galv 100CF32LNG CF32LNB 32mm Locknut BE/Galv 100CF1.5LNG CF1.5LNB 1.5" Locknut BE/Galv 50CF2LNG CF2LNB 2" Locknut BE/Galv 25

Milled Edge Lockrings - Steel

Code Galvanised Description Colour Box/QtyCF20LR - 20mm Lockrings BZP 100CF25LR - 25mm Lockrings BZP 100CF32LR - 32mm Lockrings BZP 100CF1.5LR - 1.5" Lockrings BZP 50CF2LR - 2" Lockrings BZP 25

Box Lid - Steel & Gasket

Code CodeGalvanised Black Enamel Description Colour Box/QtyCFBLG CFBLB Box Lid Standard BE/Galv 100CFGKT Besa Box Gasket (Rubber) 100

Flange Coupler - Malleable Iron (Complete with Long Bush & Lead Washer)

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20CFG CF20CFB 20mm Flanged Coupler BE/Galv 50/100CF25CFG CF25CFB 25mm Flanged Coupler BE/Galv 50100

Space Bar Saddles - Steel

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20SBSG CF20SBSB 20mm Space Bar Saddle BE/Galv 100CF25SBSG CF25SBSB 25mm Space Bar Saddle BE/Galv 100CF32SBSG CF32SBSB 32mm Space Bar Saddle BE/Galv 100CF1.5SBSG CF1.5SBSB 1.5” Spacer Bar Saddle BE/Galv 50CF2SBSG CF2SBSB 2” Spacer Bar Saddle BE/Galv 25

Distance Saddles - Malleable Base & Steel Top

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20DSG CF20DSB 20mm Distance Saddle BE/Galv 100CF25DSG CF25DSB 25mm Distance Saddle BE/Galv 50

Inspection Bends, Tee's & Elbows - Malleable Iron

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20IEG CF20IEB 20mm Inspection Elbow BE/Galv 25CF20IBG CF20IBB 20mm Inspection Bend BE/Galv 25CF20ITG CF20ITB 20mm Inspection Tee BE/Galv 25CF25IEG CF25IEB 25mm Inspection Elbow BE/Galv 10CF25IBG CF25IBB 25mm Inspection Bend BE/Galv 10CF25ITG CF25ITB 25mm Inspection Tee BE/Galv 10

Normal Bends Solid Elbows - Steel

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20NBG CF20NBB 20mm Normal Bend BE/Galv 25CF25NBG CF25NBB 25mm Normal Bend BE/Galv 10CF20SEG CF20SEB 20mm Solid Elbow 10

Crampets - Steel

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20CPG CF20CPB 20mm Crampets BE/Galv 100CF25CPG CF25CPB 25mm Crampets BE/Galv 100

Nipple

Code Galvanised Description Colour Box/QtyCF20BN - Bonding Nipples 20mm Galv 100CF20NG - 20mm Nipple BE/Galv 10CF25NG - 25mm Nipple BE/Galv 10

Stop Plugs - Brass & Galvanised

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF20SPG CF20SPBLK 20mm Stop Plug Galv/Blk 100CF25SPG CF25SPBLK 25mm Stop Plug Galv/Blk 100CF20SPB - 20mm Slotted Head Brass 100

Reducers (25-20mm) - Malleable

Code CodeGalvanised Black Enamel Description Colour Box/QtyCF2520RG CF2520RB 25-20mm Reducer BE/Galv 100CF3225RG - 32-25mm Reducer Galv 50CF3220RG - 32-20mm Reducer Galv 50


Cond

uit F

ittin

gs M

etal

Boxing Clever80

STEEL CONDUIT FITTINGS

CONDUIT BENDER

STOCKS, DIES & GUIDES

Diecast Zinc Alloy Self Colour / Black

Code Galvanised Description Origin Colour Box/QtyCFHP Hook Plate Max Load 10Kgms UK Self 100CF20DC 20mm Dome Cover UK Self 100CF20MH 20mm Male Hook Max Load 10Kgms UK Self 100CFBSC 20mm Black Ball & Socket Cover - Self 12

Steel Range - Hook Plate & Dome Cover

Code CodeGalvanised Black Enamel Description Colour Box/QtyCFHPSG CFHPSB Hook Plates Steel BE/Galv 25CF20DCSG CF20DCSB Dome Cover Steeel BE/Galv 25

Conduit Bender - Hilmor & Accessories

� CE � Sturdy stand (heavy duty) toughest & lightest� Precision tough aluminium formers � Easily portable� Pack consists of 20mm/25mm - bending machine - tool pack 20/25mm - vice & 20/25mm former � Range of accessories available

Code Description Dimensions Colour Hilmor CodeCB25 20/25mm Conduit Bender 86x51x104cm Yellow 900700B

Vice & Former + Tool PackCBF20 20mm Conduit Bender Former - Aluminium 563082CBF25 25mm Conduit Bender Former - Aluminium 563084CBTS Conduit Bender Tube Stop - Self 620103CBSB Conduit Bender Stop Bar - Self 090751CBCP Conduit Bender Centre Pin - Self 120422CBPV Conduit Bender Pipe Vice - Self 400300CBPVJ Conduit Bender Pipe Vice Jaw - Self 661053CRTRP Terry Retaining Pins 529827CBROLLP Roller Pins 120465CBGR Grooved Roller 102010

Dies, Guides, Sets & Tallow

� Approval - BS 1813 : 1974, CE Fully Guaranteed� Stocks, Dies & Guides made from high quality steel for longer life� DS20/25 die sets consists of a die stock, 20mm & 25mm set off dies and 20 & 25mm guides� Internal dimension for die stock - 42.2Ø x 17.5mm� Depth of bore for guides - 36.5mm

Conduit Die Sets & Dies

Code Description Dimensions SpecialDS20/25 1 Die Stock, 42.2Ø x 17.5mm (bore for guide 36.5mm)

1 each 20mm 25mm Guide & Die (Die)D20 Die for 20mm Thread 42.0Øx 12.5mm Recess radius of thread 8mmD25 Die for 25mm Thread 42.0Ø x 12.5mm Recess radius of thread 10.5mm

Conduit Guides

Code Description Dimensions SpecialDG20 Conduit Guide 20mm Bore 36.5DG25 Conduit Guide 25mm

Tallow

Code Description Dimensions WeightTAL Hard White Tallow Plastic Tub 750x115mm 275gms


Adap

tabl

e Bo

xes

Boxing Clever81

STEEL ADAPTABLEBOXES & GASKETS

AB33GKT

AB66GKT

TLRT4

PCGRN

TWB

Adaptable Boxes

� Manufactured from steel - Pre Galvanised & Black Enamel � Available in G - Galvanised, B - Black � Available with knockouts only � With knockouts & plain (only in size 442 Galv) � Flanged lid fitted with M5 x 8mm Pan Head Screws

3" SizeCode Codewith KO with KO Imperial Metric CodeGAL B/E Size Inches Size mm Knockouts Colour Gasket Box/QtyAB3315G AB3315B 3x3x1.5 75x75x37.5 8 BE/Galv AB33GKT 6AB332G AB332B 3x3x2 75x75x50 8 BE/Galv AB33GKT 6AB333G AB333B 3x3x3 75x75x75 8 BE/Galv AB33GKT 10

4" SizeAB4415G AB4415B 4x4x1.5 100x100x37.5 10 BE/Galv AB44GKT 4AB442G AB442B 4x4x2 100x100x50 10 BE/Galv AB44GKT 4AB443G AB443B 4X4X3 100x100x75 12 BE/Galv AB44GKT 10AB444G AB444B 4x4x4 100x100x100 8-12 BE/Galv AB44GKT 10

6" SizeAB632G AB632B 6x3x2 150x75x50 12 BE/Galv AB63GKT 1AB633G AB633B 6x3x3 150x75x75 12 BE/Galv AB63GKT 1AB642G AB642B 6x4x2 150x100x50 12 BE/Galv AB64GKT 1AB643G AB643B 6X4X3 150x100x75 14 BE/Galv AB64GKT 1AB6615G AB6615B 6X6X1.5 150x150x75 16 BE/Galv AB64GKT 1AB662G AB662B 6x6x2 150x150x50 16 BE/Galv AB66GKT 1AB663G AB663B 6x6x3 150x150x75 16 BE/Galv AB66GKT 1

9" SizeAB963G AB963B 9x6x3 225x150x75 20 BE/Galv AB96GKT 1AB993G AB993B 9x9x3 225x225x75 24 BE/Galv AB99GKT 1AB994G AB994B 9x9x4 225x225x100 24 BE/Galv AB99GKT 1

12" SizeAB12123G AB12123B 12x12x3 300x300x75 32 BE/Galv AB1212GKT 1AB12124G AB12124B 12x12x4 300x300x100 32 BE/Galv AB1212GKT 1AB12126G AB12126B 12X12X6 300x300x150 32 BE/Galv AB1212GKT 1

AB442PG - 4x4x2Plain Sided Adaptable Box Galv - 4

Re Threader M3.5 and M4

� Suitable for cleaning out thread and restoring the thread� High speed steel and precision thread � Chamfer lead and permanently fitted handle � Supplied in Euro Slot Wallets� Two sizes M4 conduit box M3.5 Switch + Socket Boxes

Code Description Box/QtyTLRT4 M4 Conduit Boxes Threader -TLRT35 M3.5 Switch & Socket Boxes Threader -

Adjustable Tap - Wrenches & Tapes

� M4 threaded for metal boxes (Conduit)� M3.5 threaded for flush boxes (Switches & Sockets)

Code Description Pitch Size Packing/QtyTWB TAP Wrench Straight M3.5, M4, 2BA - Single 1TWT T Shape TAP Wrench - Single 1TM35 M3.5 Size TAP M3.5x0.6mm Set of 3TM4 M4 Size TAP M4x0.7mm Set of 3

General Purpose - Non Hardening Water Resistant Polyurethane Plastic Compound

Code Description Box/QtyPCGRN Compound - Green for sealing fittings in damp situation 1Kg tub 10* Suitable for wiring Looms & Bulkheads, Conduit or Joint Boxes.


Mou

lded

Enc

losu

res

Boxing Clever82

General Features� CE, IMQ, IEC670-1,94 double insulated � Colour - Standard (RAL7035) - White� Material - Insulating and self extinguishing (ABS) material for longer life � Temperature - (-15° to +60°C)

Moulded Enclosures

PE5WP

AG25AG20

PE4

PE2

PE6

PE808040

PE8040

PE6535

ENCLOSURES PLAIN

ENCLOSURES WITH KNOCKOUTS

Weatherproof Moulded Enclosure - Lid Type (for RCD/MCB) IP55

� Approval - IP55 � Surface mounting with hinged lid (Clear tinge of Blue) � Suitable for interior and exterior use

Dimensions Fixing PackCode Description Modules WxHxD Code No Knockouts centre QtyPE3WP 3 Module IP65 Enclosure 3 83x175x114mm CT3G 1 (each side) 131mm 12PE5WP 5 Module IP65 Enclosure 5 125x175x114mm CT5G 2 (each side) 131mm 16

2 (top & bottom)PE5WPKIT Neutral Earth Bars Kit - - - - - 1

Wall Mounted Enclosure for RCD/MCB

� Approval - IP44 � Surface mounting - Open Type � Suitable for indoor use

Dimensions Code Description Modules WxHxD Code No Knockouts Pack QtyPE2 2 Module Enclosure 1 or 2 51x130x60mm CT2 - 50PE4 4 Module Enclosure 3 or 4 88x130x60mm CT4 - 60PE6 6 Module Indoor only 6 140x165x72mm CT6T Top & Bottom 24

2 (each side)

Weatherproof Moulded Enclosures - Screw On Lids Adaptable Boxes Moulded

� Approval - IP56 Plain � Knockout Entry - Stepped membrane gland cable entry IP56

Code Code with Internal No. of Fixing PackPlain Knockout Size plain K.O. Knockouts Centre QtyPE442 PE442K 100x100x60mm AS15/AS1 6 x 25mm 58mm 100PE643 PE643K 150x110x70mm AS25/AS2 10 x 25mm 70mm 45PE863 PE863K 190x140x70mm AS35/AS3 10 x 25mm 101mm 32/24PE1084 PE1084K 240x190x90mm AS45/AS4 12 x 32mm 150mm 20PE1295 PE1295K 300x220x120mm AS55/AS5 12 x 32mm 175mm 10/6PE15125 PE15125K 380x300x120mm AS65/AS6 12 x 45mm 251mm 4

N.B. For moulded enclosures with knockouts, please add suffix - “K” after the code of the plain enclosure. Plain enclosures knockout can bedrilled in any position.

Weatherproof Moulded EnclosuresAdaptable Boxes Moulded

� Approval - IP44 � Options - Circular or square with press fit lids� Knockout Entry - Stepped membrane gland cable entry

Fixing No. PackCode Shape Size Code centre Knockouts QtyPE6535 Round Ø 65x35mm A1 40mm 4 x 20mm 150PE8040 Round Ø 80x40mm A2 50mm 4 x 20mm 160PE808040 Square 80x80x40mm A3 50mm 6 x 20mm 160

Aluminium Glands - C12 Equivalent

� Suitable for general application & LS1 PVC Conduit� Supplied in 3 parts - incorporating internal Blue seal which grips the PVC part ofthe conduit � Available in sizes 20mm & 25mm

Code Description Pack/QtyAG20 20mm Aluminium Gland 100AG25 25mm Aluminium Gland 50


Cond

uit F

ittin

gs M

etal

Boxing Clever83

Junction Box with Connector Strip"VDE" "CE" Approved

� IP54, VDE, CE � Takes up to 660v � 7 knockouts to take 8-14mm cable� Material - Polyethylene Grey - flame resistant 750°C� Supplied with 5 pole fitted connector strip which takes 4 x 2.5mm2 or 2 x 4mm2 cable� Dimensions - 79x79x36mm � Fixing Centre - 34mm

A Box Moulded Enclosures

� IP65 VDE Approved (IP54 when used with Male Adaptors) � Suitable for 400/690v� Easy Cable Feed through high level terminals � Quick installation with use of membrane entry � Ample wiring space, rugged construction

CHOCBOX

JBO

WPC

JBOMINI

IP65 VDE APPROVED ENCLOSURES

NG2068W & NGL2068W

NG2068B & NGL2068B

No ofCode Description Size Approval Knockouts Rating Terminal Colour Box/QtyJBOMINI Adaptable Box Mini 89x43x37mm VDE 10 IP54 3x2.52mm Grey 10JBO Adaptable Box 79x79x36mm VDE 7 IP54 5x2.52mm Grey 10

No. ofCode Description Dimensions Approval Knockouts Rating Terminal Colour Box/QtyABOX25 Adaptable Box c/w Self Seal Entry 80x80x52mm VDE 7xM20 Self Entry Membrane IP65 5x1.5-42mm Centre Grey 3ABOX40 Adaptable Box c/w Self Seal Entry 93x93x55mm VDE 7xM20 Self Entry Membrane IP65 5x1.5-42mm Centre Grey 3ABOX60 Adaptable Box c/w Self Seal Entry 110x110x67mm VDE 7xM20 or 7xM25 IP65 5-62mm High Set Terminal Grey 2ABOX100 Adaptable Box c/w Self Seal Entry 140x140x79mm VDE 2xM20 3xM20/25 5xM25/32 IP65 5-102mm High Set Terminal Grey 2ABOX160 Adaptable Box c/w Self Seal Entry 180x180x91mm VDE 2xM20 3xM25/32 5xM32/M40 IP65 5-162mm High Set Terminal Grey 1

Nylon Glands - IP68

� Approval - IP68, CE � UL94 (1/2) - LSF (80°) - (-20°) 12.5mm Thread Polyamide NeopreneRubber � Material - Polyamide 6.6 (cap & body) � Neoprene (can fit with wide cross section ofcable diameters) � Temperature - (-30° to +100°C) � Colour - Black, White & Red

Code Description Rating Pack/QtyNG2068B/W/R 20mm Standard for Dia. 6-12mm IP68 100NG2568B/W/R 25mm Standard for Dia. 13-18mm IP68 100NGL2068B/W/R Locknuts for IP68 20mm (Small & Standard Glands) IP68 100NGL2568B/W/R Locknuts for IP68 25mm Glands IP68 100* Please quote B for Black W for White & R for Red when ordering.* Grey Colour on request.

Lighting Connection Box IP44 - Choc BoxLow & Mains Voltage Multi-Funtional

Code Description Rating Box/QtyCHOCBOX Lighting Chocbox with Clamp & Screws IP44 1

Waterproof Connection Unit (Male & Female)

� Approval - IP55� Surface mounting with hinged lid (Clear tinge of Blue)� Suitable for interior and exterior use

No ofCode Description Cable Size Box/QtyWPC Waterproof Connector 10Amp IP68 Max 240v 1.5mm2 1


Stee

l Enc

losu

res

Boxing Clever84

Steel Enclosures IEC BSEN RAL 7032 - Light Grey IP65

� Enclosure and Door Manufactured from 1.5mm sheet steel. 2.Omm for doors1000mm & 1200mm� Mounting Plate Manufactured from 2.5mm Sendzimir Zinc-Plated Steel� Enclosure and Door painted RAL7032 textured Polyester Powder� IP65 protection (NEMA Type 4)

Supply Includes:� Box with standard lock � Mounting Plate� Gland plate/s with sealing gasket� 2 Door Rails screwed to door� Mounting accessories� Packed in heavy duty carton

Note: Stainless Steel versions also available, delivery and prices on application.

**Stainless Steel cabinets available to order with direct delivery form manufacturers. POA**

NYLON GLAND KITS

STEEL ENCLOSURES

Nylon Glands Locknuts Kit IP68

Code Description Rating Pack/QtyNG20WKIT 20 mm Nylon Glands/ Locknuts Kit

10 Pack - IP68 White IP68 10NG20BKIT 20 mm Nylon Glands/ Locknuts Kit

10 Pack - IP68 Black IP68 10

Metal Caping - Steel

CodeGalvanised Description Colour Box/QtyMCH13 13mm Metal Capping 2Mtr Lengths Galv. 50MCH25 25mm Metal Capping 2Mtr Lengths Galv. 50MCH38 38mm Metal Capping 2Mtr Lengths Galv. 50*Handle with care sharp edges.

Code Description Thickness No of Locks RatingSE1286 Steel Enclosure 300x200x150mm 1.5mm 1 IP65SE12126 Steel Enclosure 300x300x150mm 1.5mm 1 IP65SE16126 Steel Enclosure 400X300X150mm 1.5mm 1 IP65SE16128 Steel Enclosure 400X300X200mm 1.5mm 1 IP65SE20128 Steel Enclosure 500X300X200mm 1.5mm 1 IP65SE16168 Steel Enclosure 400X400X200mm 1.5mm 1 IP65SE20168 Steel Enclosure 500X400X200mm 1.5mm 1 IP65SE24168 Steel Enclosure 600x400x200mm 1.5mm 1 IP65SE241610 Steel Enclosure 600x400x250mm 1.5mm 1 IP65SE24208 Steel Enclosure 600X500X200mm 1.5mm 1 IP65SE24248 Steel Enclosure 600X600X200mm 1.5mm 1 IP65SE242412 Steel Enclosure 600x600x300mm 1.5mm 1 IP65SE32248* Steel Enclosure 800x600x200mm 1.5mm 1 IP65SE322412* Steel Enclosure 800x600x300mm 1.5mm 1 IP65SE482412* Steel Enclosure 1200x600x300mm 2mm 3 IP65SE483212* Steel Enclosure 1200X800x300mm 2mm 3 IP65SEWMB Wall Mounting Bracket - - -SEKL Key Lock - - -SEDS Door Stop - - -* Items to special order only (not in stock at CED) delivery direct from manufacturers. All steelenclosures supplied with back Mounting Plate.


Codu

it Fi

tting

s PV

C

Durable Construction85

Conduit Fitting PVC

PVC132

PVC232

PVC CIRCULAR BOXES

PVC ADAPTABLE BOXES

PVC SURFACE BOXES

20-25mm PVC Circular Boxes to BS4607 (BSI tested)

� Approval - BS4607-Part5 � Black or White UPVC material� Max Load - 3Kgms at 60°C� Fixing Centre - 50.8mm - M4 Brass insert thread� Provision for brass earth terminal � Sizes - 20mm & 25mm

20mm

Code CodeWhite Black Description Colour Box/QtyPCF201W PCF201B 20mm 1 Way Terminal Box Black/White 20PCF202W PCF202B 20mm 2 Way Through Box Black/White 20PCF203W PCF203B 20mm 3 Way Tee Box Black/White 20PCF204W PCF204B 20mm 4 Way Inspection Box Black/White 20PCF20AW PCF20AB 20mm Angle Box Black/White 20PCF20UW PCF20UB 20mm "U" 2 Branch Box Black/White 20PCF20YW PCF20YB 20mm "Y" 3 Branch Box Black/White 20PCF20HW PCF20HB 20mm "H" Twin Trough Box Black/White 20PCF20L4W PCF20L4B 20mm 4 Hole Loop-In Box Black/White 20

25mm

Code CodeWhite Black Description Colour Box/QtyPCF251W PCF251B 25mm 1 Way Terminal Box Black/White 10PCF252W PCF252B 25mm 2 Way Through Box Black/White 10PCF253W PCF253B 25mm 3 Way Tee Box Black/White 10PCF254W PCF254B 25mm 4 Way Inspection Box Black/White 10PCF25AW PCF25AB 25mm Angle Box Black/White 10PCF25UW PCF25UB 25mm "U" 2 Way Box Black/White 10PCF25YW PCF25YB 25mm "Y" 3 Way Box Black/White 10PCF25HW PCF25HB 25mm "H" Twin Through Box Black/White 10

PVC Surface Boxes & Blank Plates BS4607 (BSI tested)

Code Description Origin Box/QtyPVC132 PVC Box 1 Gang 32mm Through 20mm K.O. 10PVC232 PVC Box 2 Gang 32mm Through 20mm K.O. 10PVC132UK PVC Socket Box 1 Gang 32mm 2 K.O. 20mm UK 20PVC232UK PVC Socket Box 2 Gang 32mm 2 K.O. 20mm UK 10PVCBP1 PVC Blank Plate 1 Gang 50PVCBP2 PVC Blank Plate 2 Gang 20* Products produced in ISO9002 factory.

PVC Adaptable Boxes

Code Description Box/QtyPVC443 PVC Boxes 110 x 110 x 75mm 10PVC663 PVC Boxes 160 x 160 x 75mm 10

sec025 Conduit Fitting PVC.qxd 12/30/2004 18:39 Page 1

Cond

uit F

ittin

gs P

VC


PVC CONDUIT FITTINGS

PVC CONDUIT FITTINGS

Female Adaptors (with Bush) to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20FAW PCF20FAB 20mm Female Adaptor Black/White 100PCF25FAW PCF25FAB 25mm Female Adaptor Black/White 100

Male Adaptor (with Ring) to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20MAW PCF20MAB 20mm Male Adaptor Black/White 100PCF25MAW PCF25MAB 25mm Male Adaptor Black/White 100

Extension Rings

Code CodeWhite Black Description Colour Box/QtyPCF20ERW PCF20ERB 20mm Extension Ring Black/White 20PCF25ERW PCF25ERB 25mm Extension Ring Black/White 20

20-25mm Space Bar Saddles to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20SBSW PCF20SBSB 20mm Space Bar Saddle Black/White 100PCF25SBSW PCF25SBSB 25mm Space Bar Saddle Black/White 100

20-25mm Couplers to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20CW PCF20CB 20mm Coupler Black/White 100PCF25CW PCF25CB 25mm Coupler Black/White 100

Box Lids PVC to BS4607

Code CodeWhite Black Description Colour Box/QtyPCFBLW PCFBLB Box Lids Black/White 100

20-25mm Round Clips PVC to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20RCW PCF20RCB 20mm Round "U" Clips Black/White 100PCF25RCW PCF25RCB 25mm Round "U" Clips Black/White 100

Inspection Elbow to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20IEW PCF20IEB 20mm Inspection Elbow Black/White 20

Inspection Bend to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20IBW PCF20IBB 20mm Inspection Bend Black/White 20PCF25IBW PCF25IBB 25mm Inspection Bend Black/White 20

Inspection Tees to BS4607

Code CodeWhite Black Description Colour Box/QtyPCF20ITW PCF20ITB 20mm Inspection Tee Black/White 20PCF25ITW PCF25ITB 25mm Inspection Tee Black/White 20

25-20mm PVC Reducers

Code CodeWhite Black Description Colour Box/QtyPCF2520RW PCF2520RB 25 - 20mm Reducers Black/White 50


PVC

Codu

it Tr

unki

ng


General FeaturesCED range of PVC conduit, trunking, oval, channel and maxi trunking is manufactured to meet (IEC)international standards. Products are manufactured from compound which contains impact modifier withcorrect ratio and can withstand most demanding conditions where material is used.

Extra super high impact strength compound makes the product shatter proof.Products are made out of virgin PVC materials not recycled material, which can provide a confidence tothe end user for quality and excellent presentation.

Round, Oval Conduit, Channel & Trunking

16-38mm PVC Mini Trunking to BS4678-4 RAL9002 Brilliant White

� Approval - BS4678-Part4 where applicable� Brilliant white colour (RAL9002) U-PVC material� Snap-On lid for easy installation and maintenance� Strong & Tough body with super high impact resistance� Size - 16x16, 25x16, 38x16 & 38x25mm � Supplied in 3Mtr lengths

PCFG500

PCFG250

ROUND CONDUIT

PVC CHANNEL

BENDING SPRING

OVAL CONDUIT

ACCESSORIES AVAILABLE IN 2005

Mini Trunking Accessories

Code Description Dimensions Length Colour End Cap Flat Bend Internal Bend External Bend Flat Tee Box/QtyPT1616 Mini Trunking Snap-On Lid 16x16mm 3Mtrs White PT1616EC PT1616FB PT1616IB PT1616EB PT1616FT 20/3MtrsPT2516 Mini Trunking Snap-On Lid 25x16mm 3Mtrs White PT2516EC PT2516FB PT2516IB PT2516EB PT2516FT 20/3MtrsPT3816 Mini Trunking Snap-On Lid 38x16mm 3Mtrs White PT3816EC PT3816FB PT3816IB PT3816EB PT3816FT 15/3MtrsPT3825 Mini Trunking Snap-On Lid 38x25mm 3Mtrs White - - - - - 15/3Mtrs

16-25mm PVC Oval Conduit to BS4607 & Clips

Code Description Clips Length Pack/QtyPO16 16mm Conduit Oval PCF160C 3Mtrs 50/3MtrsPO20 20mm Conduit Oval PCF200C 3Mtrs 50/3MtrsPO25 25mm Conduit Oval PCF250C 3Mtrs 20/3Mtrs

PVC Glue Tins

Code Description Box/QtyPCFG250 PVC Glue for Conduit Fitting 250ml 1PCFG500 PVC Glue for Conduit Fitting 500ml 1* Supplied with brush for easy use. *Contains solvent please monitor sales of product.

20-25mm PVC Conduit - Round - Light/Heavy BS6099 (BSI Tested)

� Approval - BS6099, IEC614� Available In - White & Black colour � Light and Heavy Duty� Size - 20mm or 25mm � Length - 3Mtrs

Code Code Outside Wall StandardWhite Black Description Diameter Thickness PackPR20LW PR20LB 20mm Light Duty Round Conduit 20mm 1.1mm 50x3MtrsPR25LW PR25LB 25mm Light Duty Round Conduit 25mm 1.5mm 25x3MtrsPR20HW PR20HB 20mm Heavy Duty Round Conduit 20mm 1.8mm 30x3MtrsPR25HW PR25HB 25mm Heavy Duty Round Conduit 25mm 1.9mm 25x3Mtrs

13-38mm PVC Channel

StandardCode Description Pack Length Colour PackPCH13 Channel PVC 13mm Wide 50/3Mtrs White Only 100MtrsPCH25 Channel PVC 25mm Wide 50/3Mtrs White Only 100MtrsPCH38 Channel PVC 38mm Wide 50/3Mtrs White Only 100Mtrs

20-25mm Bending Springs - Steel

Code Description Origin Box/QtyPCF20BSL 20mm Bending Spring (Light Duty) UK 25PCF25BSL 25mm Bending Spring (Light Duty) UK 25PCF20BSH 20mm Bending Spring (Heavy Duty) UK 25PCF25BSH 25mm Bending Spring (Heavy Duty) UK 25


Cond

uit F

ittin

gs P

VC


SELF ADHESIVEFLAT PACK TRUNKING

Dado Trunking

� The range offers Dado & Skirting level installation � Designed & Manufactured In UK� The range offers a complete access of power, Voice and Data Circuit� Each section of the trunking has its own designated compartment which can beaccessed independently � It accommodates 35mm deep Box Outlets for a widerange of accessories � Dado Trunking:- Containing Base & Three Lids (One In TheCentre + 2 Chamfered) � Colour:- White

Dado & Skirting Trunking

16-38mm PVC Self Adhesive Mini Trunking to BS4678-4 RAL9002 Brilliant White

� High quality international standard double sided self adhesive tape used

Code Description Length Pack/QtyPT1616SA 16x16mm Self Adhesive Trunking 3Mtrs 20PT2516SA 25x16mm Self Adhesive Trunking 3Mtrs 20PT3816SA 38x16mm Self Adhesive Trunking 3Mtrs 15PT3825SA 38x25mm Self Adhesive Trunking 3Mtrs 15

Maxi Trunking PVC to BS4678-4 RAL9002

� Approval - BS4678-Part4 � Material - U-PVC � Brilliant white colour (RAL9002) � Snap-On lid for easy installation andmaintenance � Strong & Tough body with super high impact resistance� Sizes - 50x50, 75x50 & 100x50mm � Supplied in 3Mtr Lengths

Maxi Trunking Accessories

Code Description Dimensions Length Colour End Cap Flat Bend Internal Bend External Bend Flat Tee Box/QtyPT5050 Maxi Trunking Snap-On Lid 50x50mm 3Mtrs White PT5050EC PT5050FB PT5050IB PT5050EB PT5050FT 4/3MtrsPT7575 Maxi Trunking Snap-On Lid 75x75mm 3Mtrs White PT7575EC PT7575FB PT7575IB PT7575EB PT7575FT 4/3MtrsPT10050 Maxi Trunking Snap-On Lid 100x50mm 3Mtrs White PT10050EC PT10050FB PT10050IB PT10050EB PT10050FT 2/3Mtrs

Maxi Trunking Switch & Socket Frames (for 100x50 Trunking)

Code Description Box/QtyPT10050S1 1 Gang Socket Frame 4x2 Trunking 10PT10050S2 2 Gang Socket Frame 4x2 Trunking 10

Dado Skirting Trunking Box

Code Description Box/QtyPDSBOX1 Dado Skirting Trunking Single Box 10PDSBOX2 Dado Skirting Trunking Double Box 10

Skirting Trunking

� Containing Base & Three Lid (1 Centre x1 Champhered 1 x Square)

Dado Accessories

Code Description Dimensions Length Colour End Cap* Flat Bend Internal Bend External Bend Flat Tee Box/QtyPDT17050 Dado Trunking 170x50mm 3Mtrs White PDT17050EC PDT17050FB PDT17050IB PDT17050EB PDT17050FT 1

Skirting Accessories

Code Description Dimensions Length Colour End Cap* Flat Bend Internal Bend External Bend Flat Tee Box/QtyPST17050 Skirting Trunking 170x50mm 3Mtrs White PST17050EC PST17050FB PST17050IB PST17050EB PST17050FT 1*Must state left or right side when ordering.

Self Adhesive Coiled & Flat Pack Trunking

� BS 4678 pt4 � Fix in flat Form, form sides and snap on lid, body and lid aremanufactured in a flat form compact size, faster installation, reduces waste and easyto transport � Packed in 15Mtrs Coil - Self Adhesive

Code Description Size Length ColourSAC1610 Flat, Coiled Trunking Self Adhesive 16x10mm 15Mtrs WhiteSAC1616 Flat, Coiled Trunking Self Adhesive 16x16mm 15Mtrs WhiteSAC2516 Flat, Coiled Trunking Adhesive Self 25x16mm 15Mtrs WhiteSAC3816 Flat, Coiled Trunking Adhesive Self 38x16mm 15Mtrs White


Bras

s Bu

shes

&Gl

ands

Durable Construction

Use Gland Selection Chart at theback of the catalogue.

89

Brass Range

BW GLAND KITS

CW GLAND KITS

BW GLAND KITS

Brass Bushes

� Manufactured to BS4568-Part-2 Metric Size � BS31 Imperial Size- CE � Male bushes available in long and short pattern� Female bushes available in 20mm, 25mm, 32mm, 1½” & 2” Sizes

Code Code CodeShort Male Long Male Female Description Size Box/QtyCF20MBBS CF20MBBL CF20FBB Brass Bush 20mm 100CF25MBBS CF25MBBL CF25FBB Brass Bush 25mm 100CF32MBBS CF32MBBL CF32FBB Brass Bush 32mm 50CF1.5MBBS CF1.5MBBL CF1.5FBB Brass Bush 1.5 Inches 50CF2MBBS CF2MBBL CF2FBB Brass Bush 2 Inches 20

Bush Spanner

Code Description Box/QtyTLKBS King Bush Spanner 20mm/25mm 1

Brass TRS Glands "CE" Approved

� Approval - CE � Suitable for -30° to +70°C � High quality rubber seal

Code Description Seal Dia. Box/QtyCF20PGB Packing Gland Brass 20mm TRS 7.5mm 100CF25PGB Packing Gland Brass 25mm TRS 14.3mm 50

Brass BW Gland Kits for SWA Cable to BS6121

� Approval - CE � Suitable for -30° to +70°C � High quality rubber seal� Approval - BS6121, CE to use with cable BS6346� A set consists of Gland, Shroud, Earth Tag & Locknut� BW - suitable for indoor and CW suitable for outdoor� BW - 2 parts & CW - 4 parts gland � Packed with brass racket type earth tag� Zinc passivated - lock nut and PVC shroud� Glands Size - 20 to 32mm packed in 2 in a set & 40 to 75mm packed in singleset

Code Description Box/Qty Inner/QtyG20SBWK Gland Kit 20mm BW Small 2 30G20BWK Gland Kit 20mm BW 2 25G25BWK Gland Kit 25mm BW 2 15G32BWK Gland Kit 32mm BW 2 15G40BWK Gland Kit 40mm BW 1 10G50BWK Gland Kit 50mm BW 1 7G63BWK Gland Kit 63mm BW 1 6G75BWK Gland Kit 75mm BW 1 4

Brass CW Gland Kits

Code Description Box/Qty Inner/QtyG20SCWK Gland Kit 20mm CW Small 2 20G20CWK Gland Kit 20mm CW 2 15G25CWK Gland Kit 25mm CW 2 20G32CWK Gland Kit 32mm CW 2 5G40CWK Gland Kit 40mm CW 1 15G50CWK Gland Kit 50mm CW 1 4G63CWK Gland Kit 63mm CW 1 5G75CWK Gland Kit 75mm CW 1 2*A set consists of a Gland, Shroud, Earth Tag & locknut.**BW/CW Glands Sizes 20-32mm packed 2 sets per kit, 40-75mm packed single setper kit.


PVC

Tape

Proper Labelling90

PVC Electrical Tapes - Flame Retardant (Self Extinguishing) BS3924 IEC 454 (BSI Tested)

� BS3924 (BSI approved) � IEC454-3-1 - Successfully selling over 10 years� Thickness - 0.13mm � Self-extinguishing before 50mm length � Elongation at break 180% � All products packed 10 rolls in a sleeve � Adhesion to steel 1.92N/CM � Adhesion to backing 1.9N/CM � Insulation resistance 107 Mega/ohms � Copper corrosion test - No staining � Breakdown voltage - 8kV, UV light stability � Application - Repairs insulation,colour coding, cable bundling, panel building, loom harnessing � Available in33Mtrs, 20Mtrs, 10Mtrs & 5 Mts

PVC Tape/Cable Fixings & Fasteners

TPG5050BLK

CM09L

TPG5050SIL

WT

PVC TAPES

WARNING LABELS

Description Red Black Blue Green/Yellow Brown White Grey Yellow Box/OuterPVC Tape 19 x 33Mtrs BSl Approved TP1933RED TP1933BLK TP1933BLU TP1933GY TP1933BRO TP1933WHI TP1933GRY TP1933YEL 10/100PVC Tape 19 x 20Mtrs BSl Approved TP1920RED TP1920BLK TP1920BLU TP1920GY TP1920BRO TP1920WHI TP1920GRY TP1920YEL 10/100PVC Tape 19 x l0Mtrs BSl Approved TP1910RED TP1910BLK TP1910BLU TP1910GY TP1910BRO TP1910WHI TP1920GRY TP1920YEL 10/200PVC Tape 19 x 5Mtrs BSl Approved TP1905RED TP1905BLK TP1905BLU TP1905GY TP1905BRO TP1905WHI TP1905GRY TP1905YEL 10/200*Packed 10 rolls per sleeve, TP1933 also available in Orange & Violet.

All Purpose Gaffer Tape

� 50mm Wide - 50Mtrs Long � Heavy Duty, Cloth Back Adhesive Tape� Suitable Where Normal PVC Tape would loose adhesion due to ingress of water� Used for fixing cable to Wall/Floor� General Repairs

Code Description Colour Application Box/QtyTPG5050BLK Heavy Duty Gaffer Tape 50mmx50Mtrs Black Heavy Duty 10TPG5050SIL Heavy Duty Gaffer Tape 50mmx50Mtrs Silver Heavy Duty 10

Warning Tape for laying Electrical Cable

� Dimensions - 150mm Wide x 100 Micron thickness � Length - 365Mtrs � Colour - Yellow� Provides a strong warning to building trade staff - the imminent danger from electrical cableburied beneath � Marking - Caution electrical cable below

Code Description Size (Mtrs) Box/QtyWT Warning/Caution Tape Yellow (Thickness - 100Microns) 150mm x 365 1

Warning Sign Labels

� Self Adhesive � Rigid Plastic & Vinyl Signs � Size 50x50mm � Pack of 10

Code Description Box/QtyWL415V Signs 415V Self Adhesive 50X50mm - Warning Sign 10WL240V Signs 240V Self Adhesive 50X50mm - Warning Sign 10WL400V Signs 400V Self Adhesive 50X50mm - Warning Sign 10WL230V Signs 230V Self Adhesive 50X50mm - Warning Sign 10WLDHV Signs Danger High Voltage Self Adhesive 50x50mm - Warning Sign 10WLDIE Signs Danger Isolate elsewhere Self Adhesive 50x50mm - Warning Sign 10WLDOD Signs Danger of Death Self Adhesive 50x50mm - Warning Sign 10WLEF Signs Electric Flash only Self Adhesive 50x50mm - Warning Sign 10WLRES Signs Risk of Electric Shock Self Adhesive 50x50mm - Warning Sign 10

Cable Markers

Code Description Pages Box/QtyCM09L Cloth Markers Book Letters and Numbers Letters

(A-Z) Number (1-9) 10 1CMBLANK Cloth Markers Book Blank Markers 10 1

sec026 Tape Cable Fixings & Fasteners.qxd 12/30/2004 16:42 Page 1

Cabl

e Fi

xing

Clip

s

Better Fixing91

General Features� Material - Impact resistant high density polyethylene (HMA014) can stand

extreme hot & cold� HDP - Has high stiffness and excellent dimensional stability� Nail - Galvanised high carbon steel� Advantages - Safety nail bends before breaking, long tail for better stability� Suitability - Wood, Masonry. Plasterboard & Concrete� Temperature Range -40°C to +80°C - UV stabilised

Cable Clips

CABLE CLIPS

SELF ADHESIVE CLIPS

Twin & Earth Cable Clips Flat "UV" Stabilised - 40° - 80°C

Code CodeWhite Grey Description Clip Size Nail LxDia.Ø Colour Box/OuterCF1W CF1G 1mm Twin & Earth Cable Clip 5x8mm 25x1.8mm White/Grey 100x100CF1.5W CF1.5G 1.5mm Twin & Earth Cable Clip 5x9mm 25x1.8mm White/Grey 100x100CF2.5W CF2.5G 2.5mm Twin & Earth Cable Clip 6x10mm 25x1.8mm White/Grey 30x100CF4W CF4G 4mm Twin & Earth Cable Clip 6x13mm 25x2.5mm White/Grey 30x100CF6W CF6G 6mm Twin & Earth Cable Clip 7x14mm 25x2.5mm White/Grey 30x100CF10W CF10G 10mm Twin & Earth Cable Clip 9x18mm 30x2.5mm White/Grey 20x100

Bell Wire Flat Clip

CodeWhite Description Clip Size Nail Colour Box/OuterCB8W Bell/Speaker Wire Clip 2x4mm 15x1.5mm White only 100x100

Round Clips

CodeWhite Description Clip Size Nail Colour Application Box/OuterCR4W 4mm Round Clip 4mm 20x1.4mm White only Telephone/Alarm Cable 100x100CR5W 5mm Round Clip 5mm 25x1.8mm White only 2 Core Flex, Cable 100x100CR6W 6 mm Round Clip 6mm 25x1.8mm White only 3 Core Flex, Cable 100x100CR7W/B/BLK/R 7mm Round Clip 7mm 25x1.8mm White/Black 3 Core COaxial Cable 100x100

Brown/Red Mic CableCR8W 8mm Round Clip 8mm 25x1.8mm White only - 100x100CR9W 9mm Round Clip 9mm 25x1.8mm White only - 100x100CR10W 10mm Round Clip 10mm 30x2.5mm White only - 20x100CR22W 22mm Round Clip 22mm 55x2.5mm White only 20mm Pipe 20x50N.B. 7mm Size available in Black/White/Brown & Red.

Expandable Cable Clips

Code Description Clip Size Nail Colour Box/OuterCR35W 3-5mm Expandable Cable Clip 3-5mm 20x1.4mm White only 100x100CR57W 5-7mm Expandable Cable Clip 5-7mm 25x1.8mm White only 100x100CR710W 7-10mm Expandable Cable Clip 7-10mm 25x1.8mm White only 100x100CR1014W 10-14mm Expandable Cable Clip 10-14mm 30x2.5mm White only 30x100CR1420W 14-22mm Expandable Cable Clip 14-22mm 30x2.5mm White only 20/100

Self Adhesive Fixing Clips to BS5750

� 0.5mm enamelled coated elctro galvanised mild steel� 0.8mm foam cushion sellotape adhesive acrylic for maximum effect� Saves labour costs and enhances safety � Ideal for noise sensitive work place -hospitals & libraries � Can be used on steel and plastic � Packed in 100

Code Description Origin Pack/QtySAFMlNl Self Adhesive Clip 3mm Dia Max Capacity UK 100SAF1 Self Adhesive Clip 4mm Dia Max Capacity UK 100SAF2 Self Adhesive Clip 8mm Dia Max Capacity UK 100SAF3 Self Adhesive Clip12mm Dia Max Capacity UK 100SAF4 Self Adhesive Clip 16mm Dia Max Capacity UK 100


Cabl

e Fi

xing

Tie

s

Better Fixing92

Cable Ties Colours:- Black & Natural "UL" "CE" Approved 40° 80°C

� Approval - CE, MILS-23190D (MIL SPEC) UL (RU)� Polyamide (nylon 6.6) flammability UL94V2 � Temperature - -40°C to +85°Czero halogen � Dielectric Strength - 50000 volts/mm � Resistance to oil, grease -limited resistance to acid � Colours - Black or Natural, adhesive base (2 way) � Packed in 100 - Plastic Bag

CCG Heavy Duty Junction Boxes - IP68 IEC529 (Replaces use of Jointing Kits)

� To IEC529, IP68 � GRP - Heavy duty impact resistant UV resistance � Suitable for indoor/outdoor jointing cable � No need to use sealing compound - easy clean job � Screw on lid provides easy installation � No drilling or tapping of cableentries required � Internal earth continuity ring & earth stud provided � 4 blanking heavy duty plugs provided for use 2 way, 3 way or 4 way cablejoining plugs, locked with special Alan key to prevent unauthorised use� No exposed metal parts � Supplied with 2 corrosion guard glands - BS6121or IEC529 - IP68 � BW glands provide moisture proof outer seal on the outersheath of the cable � Optional end connector & insulating sleeves � Additional gland for 3 way, 4 way connector � Connection inside junctionbox can be made by insulated splices, connector strips, porcelain connector,insulated connector etc

CJK2

UT1

UTG32

CT520/46S

CT4WAN & CT4WAB

CABLE TIES

Code Tensile Neutral Black Description Size (mm) Strength Kgs Box/OuterCT100/25N CT100/25B Cable Ties 2.5x100 8 100/40kCT140/36N CT140/36B Cable Ties 3.6x140 13 100/25kCT160/48N CT160/48B Cable Ties 4.8x160 20 100/15kCT200/48N CT200/48B Cable Ties 4.8x200 22 100/13kCT300/48N CT300/48B Cable Ties 4.8x300 22 100/10kCT370/48N CT370/48B Cable Ties 4.8x370 22 100/7.5kCT300/76N CT300/76B Cable Ties 7.6x300 55 100/4kCT370/76N CT370/76B Cable Ties 7.6x300 55 100/3.5kCT530/90N CT530/90B Cable Ties 9.0x530 55 100/2kCT710/90N CT710/90B Cable Ties 9.0x710 77 100/1kCT4WAN CT4WAB 4 Way Adhesive Base Cable Ties Nylon 20x28 - 100/1k* All sizes quoted are approximate length & width may vary slightly due to change of specification.

Stainless Steel Cable Ties

Code Description Cable Size (mm) Box/OuterCT360/46S Cable Ties Stainless Steel 360x4.6 100CT520/46S Cable Ties Stainless Steel 520x4.6 100

Jointing Kits - Straight to BS6910 for SWA Cable 600/1000v

� Designed to BS6910� Suitable for 600/1000v - PVC, XLPE, EPR armoured or un-armoured cable� Size - 1.5 to 300mm2 cable - splices not included in the kit� Supplied with instructions � Mechanical Connector up to 35mm size

Code Description Cable Size (mm) Box/OuterCJK0 Jointing Kit c/w Mechanical Connector 1.5 - 6 1CJK1 Jointing Kit c/w Mechanical Connector 10 - 16 1CJK2 Jointing Kit c/w Mechanical Connector 16 - 35 1CJK3 Jointing Kit without Mechanical Connector 35 - 75 1CJK4 Jointing Kit without Mechanical Connector 95 - 120 1CJK5 Jointing Kit without Mechanical Connector 150 - 185 1CJK6 Jointing Kit without Mechanical Connector 240 - 300 1

* Please refer to the Jointing Kit selection chart at the back of the catalogue for eachsize of cable.

FixingCode Description Size (HxDia) Centre Box/OuterUT0 Junction Box IP68 Plus 2x20mm Small (20S) IP68 Glands 49x80mm 122mm 1UT1 Junction Box IP68 Plus 2x20mm Large (20) IP68 Glands 49x80mm 122mm 1UT2 Junction Box IP68 Plus 2x25mm IP68 Glands 53x110mm 158mm 1UT3 Junction Box IP68 Plus 2x32mm IP68 Glands 105x165mm 167mm 1* No use of compound required for easy installation.

Glands IP68 & Accessories for CCG Junction BoxesCode Description Rating Box/OuterUTG20S 20mm Small Corrosion Guard Gland IP68 10UTG20 20mm Corrosion Guard Gland IP68 10UTG25 25mm Corrosion Guard Gland IP68 10UTG32 32mm Corrosion Guard Gland IP68 5* UTG IP68 Glands are suitable for use on any outdoor application.


Cabl

e Fi

xing

Lug

s

Better Fixing93

Cable Lugs

� Material - Copper to BS1977 or ISO043 - copper conductivity to 99.25%(IAS)� Copper - Electro Tinned to BS1872 & ISO2093� Copper terminal un-insulated conductor size 1.5mm2 - 600mm2

� Copper terminal un-insulated stud size - 5mm2 - 20mm2

� Splices available in sizes - 6mm2 - 400mm2 (straight connector)

Are Your Joints Fixed Properly?

CABLE LUGS

IN LINE CONNECTORS

Cable In Line Connectors - Splices (Copper)

� Designed to BS6910 � Suitable for 600/1000v - PVC, XLPE, EPR armoured or � Un-armoured cable � Size - 1.5 to 300mm2 cable - splices not included in the kit� Supplied with instructions � Mechanical Connector up to 35mm size

Code Description Length Inner/Dia. Outer/Dia. Pack/QtySP6 In Line Connector 6mm 15mm 3.8mm 5.5mm 100SP10 In Line Connector 10mm 20mm 4.5mm 6.2mm 100SP16 In Line Connector 16mm 20mm 5.4mm 7.1mm 100SP25 In Line Connector 25mm 32mm 6.8mm 8.8mm 100SP35 In Line Connector 35mm 36mm 8.2mm 10.6mm 100SP50 In Line Connector 50mm 40mm 9.5mm 12.4mm 100SP70 In Line Connector 70mm 45mm 11.2mm 14.7mm 50SP95 In Line Connector 95mm 45mm 13.5mm 17.4mm 25SP120 In Line Connector 120mm 45mm 15mm 19.4mm 50SP150 In Line Connector 150mm 55mm 16.5mm 21.5mm 50SP185 In Line Connector 185mm 60mm 18.5mm 23.5mm 40SP240 In Line Connector 240mm 80mm 21mm 26.5mm 25SP300 In Line Connector 300mm 85mm 23.5mm 30mm 20SP400 In Line Connector 400mm 85mm 28.5mm 36.5mm 10

Code Description Length mm Stud Size mm Width mm Box/QtyCL1.5 Cable Lugs 1.5mm 16 5 3.7 100CL2.5 Cable Lugs 2.5mm 20 5,6 9 100CL4 Cable Lugs 4mm 20 5,6 4.8 100CL6 Cable Lugs 6mm 23(5.6) 27(8) 5,6,8 5.5 100CL10 Cable Lugs 10mm 25,27,32 5,6,8,10,12 6.2 100CL16 Cable Lugs 16mm 30,30,37,38 6,8,10,12 7.1(6.8)7.8(11.12) 100CL25 Cable Lugs 25mm 30,30,37,37 6,8,10,12 8.8 100CL35 Cable Lugs 35mm 35,38,43 8,10,12 10.6 100CL50 Cable Lugs 50mm 43 8,10,12 12.4 100CL70 Cable Lugs 70mm 50 8,10,12 14.7 50CL95 Cable Lugs 95mm 55,55,55,61 10,12,14,16 17.4 25CL120 Cable Lugs 120mm 64 8,10,12,14,16,18,20 17.4 50CL150 Cable Lugs 150mm 69 8,10,12,14,16,20 21.5 50CL185 Cable Lugs 185mm 78 8,10,12,16 23.5 40CL240 Cable Lugs 240mm 92 10,12,14,16,20 26.5 25CL300 Cable Lugs 300mm 101 12,14,16 30 20CL400 Cable Lugs 400mm 114 16,20 36.5 10CL500 Cable Lugs 500mm 124 16,20 39 5CL600 Cable Lugs 600mm 130 16,20 44 5CL630 Cable Lugs 630mm 130 16,20 44 -* Please add stud size after the code e.g. code for 6 Lug Size & 8mm Hole (Stud Size) is CL6/8


Pre

Insu

late

d Lu

gs

Better Fixing94

Pre-Insulated Lugs

MALE/FEMALE TERMINALS

RINGS

PIN CONNECTORS

MALE/FEMALE BULLETS

INSULATED FORKS

SPLICES

General Features� Manufactured by UL approved ISO09002 - factory� Female, Male & Splices - as per UL310 standard� Rings & Forks - as per UL 486A � Material - Copper � Insulation - Nylon � Available - Red 0.5 - 1.5mm, Blue 1.5 - 2.5mm & Yellow 4 - 6mm � Types - Rings, Male, Female, Forks & Splices� Packed in plastic bags with header card - Euro hook for display� Quantity - 100pcs per pack

Per-Insulated Terminal Lugs - Rings

Code Description Washer Size Inner Dia. Colour Bag/QtyPLR1537R 1.5mm Ring 3.7mm Stud - Red 10mm 4.3mm Red 100PLR1543R 1.5mm Ring 4.3mm Stud - Red 10mm 4.3mm Red 100PLR1564R 1.5mm Ring 6.4mm Stud - Red 10mm 4.3mm Red 100PLR2543B 2.5mm Ring 4.3mm Stud - Blue 10mm 4.9mm Blue 100PLR2553B 2.5mm Ring 5.3mm Stud - Blue 10mm 4.9mm Blue 100PLR2564B 2.5mm Ring 6.4mm Stud - Blue 10mm 4.9mm Blue 100PLR643Y 6mm Ring 4.3mm Stud - Yellow 14mm 6.7mm Yellow 100PLR653Y 6mm Ring 5.3mm Stud - Yellow 14mm 6.7mm Yellow 100PLR664Y 6mm Ring 6.4mm Stud - Yellow 14mm 6.7mm Yellow 100

Male Push-On Terminal - Vynel

Code Description Size WxL Colour Bag/QtyPLM15R 1.5mm .250mm Tab x .08mm Height Male - Red 6.3x21mm Red 100PLM25B 2.5mm .250mm Tab x .08mm Height Male - Blue 6.3x21mm Blue 100PLM6Y 6mm .250mm Tab x .08mm Height Male - Yellow 6.3x25mm Yellow 100

Female Push-On Terminal - Vynel

Code Description Size WxL Colour Bag/QtyPLF15R 1.5mm .250mm Tab x .08mm Height Female - Red 7.4x20.8mm Red 100PLF25B 2.5mm .250mm Tab x .08mm Height Female - Blue 7.4x20.8mm Blue 100PLF6Y 6mm .250mm Tab x .08mm Height Female - Yellow 7.4x24.8mm Yellow 100

Splices Butt Connection - Vynel

Code Description Outer Dia. Inner Dia. Length Bag/QtyPLS15R 1.5mm Splices - Red 4.3mm 1.7mm 2.6mm 100PLS25B 2.5mm Splices - Blue 4.9mm 2.3mm 2.6mm 100PLS6Y 6mm Splices - Yellow 6.5mm 3.4mm 2.7mm 100

Pin Connector

Code Description Pin Length Size Colour Bag/QtyPLP12B 12mm Length Pin - Blue 2.5mm2 Cable 12mm 4mm Red 100PLP12R 12mm Length Pin - Red 1.5mm2 Cable 12mm 4mm Blue 100PLP14Y 14mm Length Pin - Yellow 6mm2 Cable 14mm 6mm Yellow 100

Male/Female Bullet Connector Pre-insulated Terminals

Code Description Conductor Tab Colour Bag/QtyPLFB15R 1.5mm2 Red Female Bullet to fit 4mm Tab 1.5mm2 4mm Red 100PLFB25B 2.5mm2 Blue Female Bullet to fit 4mm Tab 2.5mm2 4mm Blue 100PLFB6Y 6mm2 Yellow Female Bullet to fit 5mm Tab 6mm2 5mm Yellow 100PLMB15R 1.5mm2 Red Male Bullet to fit 4mm Tab 1.5mm2 4mm Red 100PLMB25B 2.5mm2 Blue Male Bullet to fit 4mm Tab 2.5mm2 4mm Blue 100PLMB6Y 6mm2 Yellow Male Bullet to fit 5mm Tab 6mm2 5mm Yellow 100

Pre-Insulated Forks

InsulatedCode Description Total Length Length Colour Bag/QtyPLFK1537R 1.5mm Forks 3.7mm Stud - Red 21.2mm 10mm Red 100PLFK1543R 1.5mm Forks 4.3mm Stud - Red 21.2mm 10mm Red 100PLFK1564R 1.5mm Forks 6.4mm Stud - Red 21.2mm 10mm Red 100PLFK2543B 2.5mm Forks 4.3mm Stud - Blue 21.2mm 10mm Blue 100PLFK2553B 2.5mm Forks 5.3mm Stud - Blue 21.2mm 10mm Blue 100PLFK2564B 2.5mm Forks 6.40mm Stud - Blue 21.2mm 10mm Blue 100PLFK643Y 6mm Forks 4.3mm Stud - Yellow 25.5mm 10mm Yellow 100PLFK653Y 6mm Forks 5.3mm Stud - Yellow 25.5mm 10mm Yellow 100PLFK664Y 6mm Forks 6.4mm Stud - Yellow 25.5mm 10mm Yellow 100


Cabl

e Fi

xing

s

Better Fixing95

Cable Cleats - SWA Cable

� Material - (LDPE) Low density polyethylene, providing - high strength and impactresistance � Temperature - (-35° to +105°C) � UV - light resistant, corrosionresistance � Suitability - Indoor & outdoor use

Glands Pots & Seals

Pots Seals

� Suitable for temperatures up to 105°C � Consists of Grey (RMX) compound, Brass body, plastic stub cap &PVC sleeving Ref (RZP) � A seal is normally required to provide means ofelectrical connection

Pots & Seals (with Earth Tails)

� Consists of above products, plus earth tag & tail� Earth tail has been designed to comply with requirements of IEE wiring regulation to provide a circuit protective conductor

Glands

� BASEEFA, BS EN50014 & EN50018 � Supplied - 20mm & 25mm sizes� Consists of body, nut & threaded part � Exd - Zone 1 & Zone 2� Suitable for up to 500v

Dimensions - Body Thread HexSize Length Length Size20mm 32mm 11mm 25.4mm25mm 35mm 11mm 31.2mm

CC8

TC9

RGM

CABLE CLEATS

POTS & SEALS

Cable Dia.Code Description Nominal Hole Fixing Mini Max Size Bag/QtyCC3 Cable Cleats No.3 7.6mm M6 6.8mm 8.4mm 14x13x24mm 50CC4 Cable Cleats No.4 10.0mm M6 9.3mm 10.9mm 14x15x26mm 50CC5 Cable Cleats No.5 12.7mm M6 11.1mm 14.3mm 14x18x28mm 50CC6 Cable Cleats No.6 15.2mm M6 13.6mm 16.8mm 15x19x31mm 50CC7 Cable Cleats No.7 17.8mm M6 16.2mm 19.4mm 15x23x34mm 50CC8 Cable Cleats No.8 20.3mm M6 18.7mm 21.9mm 16x26x38mm 50CC9 Cable Cleats No.9 22.8mm M6 21.2mm 24.4mm 16x29x41mm 50CC10 Cable Cleats No.10 25.4mm M10 23.8mm 27.0mm 20x32x47mm 50CC11 Cable Cleats No.11 27.7mm M10 26.1mm 29.3mm 20x35x50mm 20CC12 Cable Cleats No.12 30.4mm M10 28.8mm 32.0mm 20x37x52mm 20CC13 Cable Cleats No.13 35.0mm M10 31.4mm 34.6mm 20x39x55mm 20CC14 Cable Cleats No.14 35.6mm M10 32.4mm 38.8mm 21x41x58mm 20CC16 Cable Cleats No.16 40.6mm M10 37.4mm 43.8mm 21x48x65mm 20CC18 Cable Cleats No.18 45.7mm M10 42.5mm 44.9mm 21x52x69mm 20CC20 Cable Cleats No.20 50.8 mm M10 47.5mm 54.0mm 21x59x74mm 20* Please refer to the Cleats section chart at the back of the catalogue.

2 Part Cable Cleats

Code Description Min Max Bag/QtyTC9 Two Hole Fixing Cleat 50.0-57.0mm 50mm 57mm 10TC10 Two Hole Fixing Cleat 57.0-64.0mm 57mm 64mm 10TC11 Two Hole Fixing Cleat 64.0-70.0mm 64mm 70mm 10TC12 Two Hole Fixing Cleat 70.0-76.0mm 70mm 76mm 10TC14 Two Hole Fixing Cleat 76.0-85.0mm 76mm 85mm 10TC15 Two Hole Fixing Cleat 82.5-105.0mm 82mm 105mm 10* Please refer to selection chart at the back of the catalogue for each cable size.

Mineral Insulated Cable AccessoriesGlands, Pots & Seals and Pots

� Available In - Red, White, Orange, Bare Copper & Black colour � Bare clips - RC, Plastic Coated Saddles - RSFJ, Bare Saddles - RS, Plastic CoatedClips - RCHJ

Cable Size Coated Clips Saddle PVC Pack/Qty2L1.5 RCHJ32 RSFJ302 502L2.5, 3L1.5 RCHJ34 RSFJ342 503L2.5, 4L1.5 RCHJ37 RSFJ342 504L2.5 RCHJ43 RSFJ422 50

N.B. When ordering please add suffix clip colour after the code. RED = Red, WHI = White, ORA = Orange or BLK = Black

CodeCode Code Pots & Seals Cable GlandGland Pots & Seals with Earth Tag Description Size Size Pack/QtyRGM2L1.5 RPS2L1.5 RPSL2L1.5 Glands, Pots & Seals 2L1.5 20mm 10RGM2L2.5 RPS2L2.5 RPSL2L2.5 Glands, Pots & Seals 2L2.5 20mm 10RGM3L1.5 RPS3L1.5 RPSL3L1.5 Glands, Pots & Seals 3L1.5 20mm 10RGM3L2.5 RPS3L2.5 RPSL3L2.5 Glands, Pots & Seals 3L2.5 20mm 10RGM4L1.5 RPS4L1.5 RPSL4L1.5 Glands, Pots & Seals 4L1.5 20mm 10RGM4L2.5 RPS4L2.5 RPSL4L2.5 Glands, Pots & Seals 4L2.5 20mm 10


Cabl

e Fi

xing

s

Better Fixing96

Tools for Mineral Insulated Cable

JOI Stripper - ZSJ for stripping cable sheath on popular size 2L1, 2L1.5,2L2.5, 3L1, 4L1, 4L1.5� Spare blade - ZSJB � Box Quantity - 5

Small Pyro Stripper - ZSUS for stripping cable up to Dia. 9mm� Spare blade - ZSUSB � Box Quantity - 5

Large Pyro Stripper - ZSU for stripping cable up to Dia. ??mmm� Spare Blade - ZSUB� Box Quantity - 5

Pyro Ringer - ZR this tool is used to assist the removal of sheath at a selected point and is used in conjunction with side cutter

Pyro Pot Wrench - ZPM20, ZPM25� Size - 20mm & 25mm used in conjunction with cablegland to screw on brass pot� Box Quantity - 5

Pyro Crimper - ZDC20. ZDC25� A quick method of crimping the mouth of the pot to securethe closure � Available - 20mm & 25mm � Box Quantity - 5

ZSU

ZSJ

ZDC20

ZMP20

AP SADDLES SERIES

AP10WHI CLIPS

AP8RED CLIPS

SHROUDS

SADDLE MICC/FP200/FIRE TUFF CABLE & PYRO

Code Description Size Pack/QtyAP7S Saddle - Plastic Coated RSFJ302/RSFL302 2L1.5mm 100AP8S Saddle - Plastic Coated RSFJ342/RSFL342 2L2.5mm, 3L1.5mm 100AP9S Saddle - Plastic Coated RSFJ372/RSFL372 3L2.5mm, 4L1.5mm 100AP10S Saddle - Plastic Coated RSFJ422/RSFJ422 4L2.5mm 100AP12S Saddle - Plastic Coated RSFJ592 2H10mm 100* When ordering AP series Clips & Saddles please write the colour after the codee.g. Code for Red Clips 2L1.5 is AP7SREDN.B. For AP Cable Clip use please refer to the Clips Selection Chart at the back of thecatalogue.

Clips - RCHJ MICC/FP200/FIRTUF & PYRO

� Clips & Saddle copper covered with PVC � Available In - Red & White colours

Code Description Size Pack/QtyAP7 Clips - Plastic Coated RCHJ32/RCHL28 2L1.5mm 100AP8 Clips - Plastic Coated RCHJ34/RCHL32 2L2.5mm, 3L1.5mm 100AP9 Clips - Plastic Coated RCHJ37/RCHL34 3L2.5mm, 4L1.5mm 100AP10 Clips - Plastic Coated RCHJ40/RCHL37 4L 2.5mm 100AP11 Clips - Plastic Coated RCHJ43/RCHL40 4H 2.5mm 100AP12 Clips - Plastic Coated RCHJ59/RCHL54 2H 10mm 100

Sealing Compound & Stub Sleeving

� RMX sealant compound is used in Pots & Seals for safer insulation� Stub sleeving is used on top plastic stub cap for cable conductor insulation

Code Description Pack/QtyRMX Sealing Compound up to 150 Degrees (3 Sticks) 1RZP1.5BLK Stub Sleeving 1.5mm Black per 3Mtrs Hank 1RZP2.5BLK Stub Sleeving 2.5mm Black per 3Mtrs Hank 1

Shrouds

� Available in PVC or Low Smoke & Fumes (LSF) � Size - 20mm & 25mm � Colour - Red, White, Black & Orange

Code Description Pack/QtyRHG20 Shroud 20mm - Red,/Black/Orange/White 10LS20 Shroud 20mm LSF - All Colours 10* When ordering Shrouds please add Colour after the code.

RED = Red, WHI = White, ORA = Orange & BLK = Black


Fixi

ngs

&Fa

sten

ers

Better Fixing97

Screws, Suspension Anchors & Expansion Plugs

Fixings & Fasteners

M4 SCREWS

M3.5 NICKEL PLATED

M3.5 BRASS

CAPPING NAIL

EXTENSION STUD

Extension Screws M3.5 BNP

� Brass Nickel Plated � Suitable for M3.5mm machine screws � M3.5x35mm

Code Description Bag/QtyS35ES Extension Screw Stud M3.5 BNP Machine 100

Piggy Back

M3.5 Switch & Socket Screws (Brass Self Colour)

� M3.5 countersunk - raised head slotted screws� Clearly defined pitch for easy screwing� Available in Brass or Nickel-Plated� Packed in plastic bag of 100 - outer carton quantity 1000pcs

Code Description Bag/QtyS3525B Skt Screw M3.5 x 25mm Brass 100S3535B Skt Screw M3.5 x 35mm Brass 100S3540B Skt Screw M3.5 x 40mm Brass 100S3550B Skt Screw M3.5 x 50mm Brass 100S3560B Skt Screw M3.5 x 60mm Brass 100S3575B Skt Screw M3.5 x 75mm Brass 100

M3.5 Switch & Socket Screws

� M3.5 countersunk - raised head slotted screws� Clearly defined pitch for easy screwing� Available in Brass or Nickel-Plated� Packed in plastic bag of 100 - outer carton quantity 1000pcs

Code Description Bag/QtyS3525NP Skt Screw M3.5 x 25mm Nickel Plated 100S3530NP Skt Screw M3.5 x 30mm Nickel Plated 100S3535NP Skt Screw M3.5 x 35mm Nickel Plated 100S3540NP Skt Screw M3.5 x 40mm Nickel Plated 100S3550NP Skt Screw M3.5 x 50mm Nickel Plated 100S3575NP Skt Screw M3.5 x 75mm Nickel Plated 100

M4 Besa Box Pan Head - Screws (Brass)

� Machined screws manufactured from brass - size 4mm� Pan head, slotted screws - M4� Size - 6mm to 50mm length � M4 washer & nut to suit (see page 98)� Used for PVC/Metal conduit circular boxes & fittings� Packed in 100's

Code Description Bag/QtyS46B Pan Head M4 x 6mm Screw Brass 100S48B Pan Head M4 x 8mm Screw Brass 100S410B Pan Head M4 x 10mm Screw Brass 100S412B Pan Head M4 x 12mm Screw Brass 100S416B Pan Head M4 x 16mm Screw Brass 100S420B Pan Head M4 x 20mm Screw Brass 100S425B Pan Head M4 x 25mm Screw Brass 100S435B Pan Head M4 x 35mm Screw Brass 100S440B Pan Head M4 x 40mm Screw Brass 100S450B Pan Head M4 x 50mm Screw Brass 100

Capping nails

� Mickey pins - capping nails complete with washer� Ideal for PVC or steel capping� Suitable eye protection essential - to avoid snap & fly � Available In:- Two sizes 25mm and 35mm� 2.5mm diameter

Code Description Bag/QtyS25CPN Capping Nails 2.5mm x 25mm Long 100S35CPN Capping Nails 2.5mm x 35mm Long 100

Screws 2BA

Code Description Bag/QtyS2BA34 2BA 3/4" Screw 100S2BA1 2BA 1" Screw 100S2BA2 2BA 2" Screw 100

sec027 Fixings and Fasteners.qxd 12/30/2004 16:38 Page 1

Better Fixing98

Fixi

ngs

&Fa

sten

ers

SELF TAPPER - BZP

BLACK JAP

M6 - M10 NUTS

M4 NUTS & WASHERS

BRASS

ROOFING NUTS & BOLTS

WOOD SCREWS CSP SERIES

Wood Screws - Countersunk Hardened Twin Head BZPBlack JAP Head / Brass Round Head

� For use without pilot holes� Sharp points with double angle taper bites quickly into the wood� Special head design will fit screwdriver safely� Deep thread with wide pitch, high stripping torque and easy to tighten the screw -

less damage to work piece� Hardened steel twin thread with Posi-Drive head for countersunk� Box quantity 200

Code Description Bag/QtyS61 Wood screw 6 x 1" 200S6125 Wood screw 6 x 1.25" 200S615 Wood screw 6 x 1.50" 200S62 Wood screw 6 x 2" 200S81 Wood screw 8 x 1" 200S8125 Wood screw 8 x 1.25" 200S815 Wood screw 8 x 1.50" 200S82 Wood screw 8 x 2" 200S83 Wood screw 8 x 3" 200S101 Wood screw 10 x 1" 200S10125 Wood screw 10 x 1.25" 200S1015 Wood screw 10 x 1.50" 200S102 Wood screw 10 x 2" 200S103 Wood screw 10 x 3" 200Note: Add Suffix to CODE CSP = Countersunk Pozi-Driv, BJR = Black JAP Round

Head or BSR = Brass Round Head (Box Quantity 200).

Self Tappers BZP P/H Cross

� Bright Zinc Plated Harden Steel To Din 7981 � Idea For Joining Thin Sheet Metal� Used Extensively In Spring Steel Nut And Clip Application � Ideal Suited For Hole Location On Assemblies Where Hole Alignment Can Present

Problem � Packed In Box Qty 200� Available In:- 6mm & 8mm Gauge ABD Various Length

Code Description Bag/QtyS612ST Self Tappers BZP P/H Cross 6x½" 200S658ST Self Tappers BZP P/H Cross 6x5/8" 200S634ST Self Tappers BZP P/H Cross 6x¾" 200S61ST Self Tappers BZP P/H Cross 6x1" 200S812ST Self Tappers BZP P/H Cross 8x½" 200S858ST Self Tappers BZP P/H Cross 8x5/8" 200S834ST Self Tappers BZP P/H Cross 8x¾" 200S81ST Self Tappers BZP P/H Cross 8x1" 200S8114ST Self Tappers BZP P/H Cross 8x1¼" 200S8112ST Self Tappers BZP P/H Cross 8x1½" 200

Roofing Nuts & Bolts M6

� Mushroom head (cross-slotted) � Steel bright zinc plated with square nuts� Used in general fixing of trunking & cable tray

Code Description Bag/QtyS612RNB Roofing Bolt/Nut M6 x 12mm 200S620RNB Roofing Bolt/Nut M6 x 20mm 200S625RNB Roofing Bolt/Nut M6 x 25mm 200S640RNB Roofing Bolt/Nut M6 x 40mm 100S650RNB Roofing Bolt/Nut M6 x 50mm 100

M Series Hexagonal Nuts

� Hexagonal Steel M Nuts Bright Zinc Plated� Available in M6, M8 and M10 sizes� Packed in 100 Box Quantity

Code Description Bag/QtyM6N M6 Hexagonal Nut 100M8N M8 Hexagonal Nut 100M10N M10 Hexagonal Nut 100

M4 Nuts & Washers (Brass)

Code Description Bag/QtyS4N Brass Nut 4mm 100S4W Brass Washer 4mm 100


Fixi

ngs

&Fa

sten

ers

Securely Fastened99

CHANNEL SPRINGS

WEDGE ANCHORS

EXPANSION BOLTS

PROJECTION BOLTS

Projection Bolts for Cable Tray, Trunking & Structure Fixing

� Ideal where fixture to be placed over the bolt � suitable for wall fixing, overhead and ceiling work � Applications:- Cable Tray, Trunking, Suspended Ceilings Radiators, Pipe Works, Ducting and

Structural Fixings � Stud / Projecting Type

Max6mm Thread Fixture ScrewCode Description Size Thickness Hole Size Length Box/QtyPB610 6x10mm Projection Bolt 6mm 10mm 10mm 60mm 25PB625 6x25mm Projection Bolt 6mm 25mm 25mm 70mm 25

Max8mm Thread Fixture ScrewCode Description Size Thickness Hole Size Length Box/QtyPB810 8x10mm projection bolt 8mm 10mm 10mm 70mm 25PB825 8x25mm projection bolt 8mm 25mm 25mm 85mm 25PB840 8x40mm projection bolt 8mm 40mm 40mm 100mm 25

Expansion Shields Anchors for Switch Gear Racking

� Loose Bolt Type � Ideal for floor fixing� Suitable for holding down anchors for machinery switchgear racking and structural fixings

Max6mm Thread Fixture ScrewCode Description Size Thickness Hole Size Length Box/QtyEB610 6x10mm Expansion Shield Anchor 6mm 10mm 12mm 60mm 25EB625 6x25mm Expansion Shield Anchor 6mm 25mm 12mm 70mm 25EB640 6x40mm Expansion Shield Anchor 6mm 40mm 12mm 90mm 25

Max8mm Thread Fixture ScrewCode Description Size Thickness Hole Size Length Box/QtyEB810 8x10mm Expansion Shield Anchor 8mm 10mm 14mm 70mm 25EB825 8x25mm Expansion Shield Anchor 8mm 25mm 14mm 90mm 25EB840 8x40mm Expansion Shield Anchor 8mm 40mm 14mm 100mm 25

Wedge Anchors

� Colour - Zinc and yellow passivated� Built-In expansion cone� Available in sizes 6-10mm� Hammer set wedge anchor for medium duty fixing� Wedge anchor is internally thread socket anchor for use with bolt or threaded rod� Ideal for fixing ductwork, cable tray, trunking or holding down in concrete

Thread ThreadCode Description Dia. Size Length Length Box/QtyWA6 Wedge Anchors M6 8mm 6mm 25mm 11mm 100WA8 Wedge Anchors M8 10mm 8mm 30mm 13mm 100WA10 Wedge Anchors M10 12mm 10mm 40mm 19mm 100

Channel Spring Nuts

� Spring - Mild steel, heavy duty bright zinc plated � Sizes - M6, 8, 10 � Spring Sizes - 10mm & 32mm� Suitable for fixing on channels, heavy enclosures, switch gear etc.

Code Description Spring Length Bag/QtyCSN6S Channel Spring Nut M6 Short 10mm 35x20x6mm 100CSN8S Channel Spring Nut M8 Short 10mm 35x20x6mm 100CSN10S Channel Spring Nut M10 Short 10mm 35x20x8mm 100CSN6L Channel Spring Nut M6 Long 32mm 35x20x6mm 100CSN8L Channel Spring Nut M8 Long 32mm 35x20x6mm 100CSN10L Channel Spring Nut M10 Long 32mm 35x20x8mm 100


Securely Fastened100

Fixi

ngs

&Fa

sten

ers

PENNY WASHERS

EXPANSION PLUGS

SPRING TOGGLE

DRYWALL ZINC

DRYWALL BLACK

PLASTER BOARD DRIVA FIXING

METAL CAVITY FIXING

Penny Washers M6 & M8 - Steel Zinc Plated

� Steel bright zinc plated � Sizes - 6, 8, 10mm - Internal diameter� 20, 25, 32mm - Outer diameter � Thickness - 1.6mm � Packed in 100's

Code Description Hole External Dia. Thickness Box/QtyS620PW Penny Washer M6 x 20mm 6mm 20mm 1.6mm 100S625PW Penny Washer M6 x 25mm 11mm 25mm 1.6mm 100S632PW Penny Washer M6 x 32mm 6mm 32mm 1.6mm 100S825PW Penny Washer M8 x 25mm 8mm 25mm 1.6mm 100S832PW Penny Washer M8 x 32mm 8mm 32mm 1.6mm 100S1025PW Penny Washer M10 x 25mm 10mm 25mm 1.6mm 100S1032PW Penny Washer M10 x 32mm 10mm 32mm 1.6mm 100

Expansion Plugs - Plastic (HDPE)

� Manufactured from HDPE plastic � Colour - Yellow, Red or Brown� Plastic teeth on the inside of the plug guides screw straight� Self centring internal guide for screws� Packed - String of 10, 100 Boxed or bulk-pack of 2000

Code Description Length Box/QtyRPYEL Expansion Plug Yellow 5mm 4/6/8 Screw Size 24.5mm 100RPRED Expansion Plug Red 6/6.5mm 6/8/10 Screw Size 32mm 100RPBRO Expansion Plug Brown 7mm 10/12/14 Screw Size 38mm 100

Spring Toggle

� All metal cavity fixing � Goods for plaster & fibre board � Heat resistance� Spring activated toggle bars ideal for cavity walls and ceiling � Spread load over a wide area

Screw Hole Max Thickness OfCode Description Length Size Base and fixture Box/QtyS550ST M5x50mm Spring Toggle 50mm 14mm 24mm 50S575ST M5x75mm Spring Toggle 75mm 14m 50mm 50

Drywall Screws Black/Zinc

� Black Phosphate � Bright Zinc Plated� Twin Thread Bugle Head with Phillips Recess Hardwood� Sharp Piercing Point � Application:- Plasterboard, Fibreboard, Wood & Steel

Partitions

Code Description Box/QtyS3525DW Black Drywall Screw 3.5x25mm Philips 200S3532DW Black Drywall Screw 3.5x32mm Philips 200S3538DW Black Drywall Screw 3.5x38mm Philips 200S3550DW Black Drywall Screw 3.5x50mm Philips 200* Please state finish by adding B for Black Z for Zinc.

Plasterboard Suspension Anchors

� Self drill into plaster board� Fast installation� Supplied with screws, anchor body - zinc alloy� Screw size 32mm crosshead - anchor length 38mm

Code Description Box/QtySDE Driva Cavity Dry Wall Suspension Fixing (Zinc Alloy) 100

Metal Cavity Fixing

� All metal cavity fixing plated steel � Anti rotation design collapsing legs� Screws and Fixing can be removed as requested� Ideal for plaster board partitions, fibre board and other soft faced materials� Maximum strength & wide base for high loads

Screw Grip HoleCode Description Dia. Length Range Size Box/QtyMGA432 M4x32 Metal Cavity Anchors 4mm 32mm 3-13 7mm 100MGA537 M5x37 Metal Cavity Anchors 5mm 37mm 7-15 8mm 100MGA637 M6x37 Metal Cavity Anchors 6mm 37mm 7-15 10mm 100


Documents

Lighting Transformers - Jendee Trading Ltd | UK … with fitting instructions Twist & Lock Lamp retaining system Pressed Steel & Diecast Single Clam Pack Kit for Low Voltage Lighting