Upload
lisle
View
19
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Light and Matter For Computer Graphics. Comp 770 Lecture Spring 2009. Overview. A very high-level introduction to some concepts and definitions underlying image synthesis. Optics Materials and Surfaces Radiometry and Photometry Color Energy Transport. Optics. - PowerPoint PPT Presentation
Citation preview
Light and MatterFor Computer Graphics
Comp 770 LectureSpring 2009
OverviewA very high-level introduction to some concepts
and definitions underlying image synthesis. Optics Materials and Surfaces Radiometry and Photometry Color Energy Transport
OpticsThe study of light has 3 sub-fields.
Physical optics: study of the wave nature of light. Geometric optics: study of the particle nature of light. Quantum optics: study of the dual wave-particle nature of
light and attempt to construct unified theories to support duality. Wave “packets” called photons.
Computer graphics most concerned with geometric optics (but need some of the others, too).
Reflection and Transmission Reflection: “process whereby light of a specific
wavelength incident on a material is at least partly propagated outward by the material without change in wavelength.”
Transmission (or refraction): “process whereby light of a specific wavelength incident on the interface (boundary) between two materials passes (refracts) through the interface without change in wavelength.”(Definitions from Glassner1995).
Types of ReflectionSpecular (a.k.a. mirror or regular) reflection
causes light to propagate without scattering.
Diffuse reflection sends light in all directions with equal energy.
Mixed reflection is a weighted combination of specular and diffuse.
Types of ReflectionRetro-reflection occurs when incident energy
reflects in directions close to the incident direction, for a wide range of incident directions.
Gloss is the property of a material surface that involves mixed reflection and is responsible for the mirror like appearance of rough surfaces.
Types of GlossGloss factors measured by the ratio of energy
() in the reflected and incident directions for certain standard angles (i and r). Specularity measures the brightness of a highlight:
r /i (i = r = 60°). Sheen measures the brightness of glancing
highlights: r /i (i = r = 85°).
Types of Gloss Contrast is the brightness of a glancing highlight relative to
the brightness in the surface normal direction r /n. (i = r = 85°).
Distinctness of Image measures the clarity of the highlight or the sharpness of its borders: dr / dr , or the rate of change of reflected energy with reflected direction.
Absence of Bloom measures the haziness around the highlight: r2 /r1, where r1 and r2 are only a few degrees different.
Computing The Specular Reflection Vector
ri
I
N
R
IN’
N’
R
Given: I, N, R are coplanar. IN = R N
N’ = (I N)N
From the parallelogram shown at right, see:
R + I = 2N’
Or
R = 2N’ – I = 2(I N)N - I
Types of TransmissionSpecular transmission causes light to propagate
w/o scattering, as in clearglass.
Diffuse transmission sends light in all directions with equal energy, as infrosted glass.
Mixed transmission is a weighted combination of specular and diffuse transmission.
Index of Refraction The speed of light is not the same in all media.
Reference medium is a perfect vacuum. IOR: i() = c / v. c = speed of light in vacuum, v is speed
of light of wavelength in the medium. Surface where two media touch called the interface.
Light appears to bend when passing through the interface, due to change in speed.
Amount of bending, or refraction, determined by the IOR of both materials.
Snell’s Law of Refraction Governs the geometry of refraction.
i()sini = t()sint i = IOR of incident medium
t = IOR of medium into which the light is transmitted
If the light is transmitted intoa denser medium, it is refracted toward the normal of the interface.
If the light is transmitted into a rarer medium, it is refracted away from the normal of the interface.
sini
i
t
I
T
N
sint
Total Internal ReflectionAt some angle, called the critical angle, light is
bent to lie exactly in the plane of the interface.At all angles greater than this, the light is
reflected back into the incident medium: total internal reflection (TIR).
Snell’s law gives critical angle c
i()sinc = t()sin( / 2)sinc = t () / i()
Computing The Specular Transmission Vector
i
t
I
T
NR
-M MI
I||T
T||
occurred. has TIR negative, is cos11 If
cos11cos
:ngSubstituti
cos11sin1sin1cos
coscoscoscos
sin
sin :Law sSnell'Apply
coscossin
sincossin
cossin
1
:so ,sin ,cos ,sin
cos
2
2
2
2
2
2
2
2
2
||
||
it
i
it
ii
t
i
t
i
it
ii
t
itt
tit
i
t
iti
t
i
t
i
i
t
tii
ttt
ii
tti
i
NIT
NINNI
NNINMTTT
NIM
TTI
NII
Surface Models Perfect mirrors and reflections don’t exist. Perfect transmission requires a perfect vacuum. Real surfaces have some degree of roughness.
Even most basic simulation must account for specular and diffuse reflection / transmission.
More realism requires accounting for more factors. Wavelength dependence: dispersion, diffraction, interference Anisotropy: angular-dependence of reflectance. Scattering: absorption and re-emission of photons.
Basic Surface ModelsNon-physically based, as used in OpenGL.
Materials have ambient, diffuse, and specular colors. Ambient is a very coarse approx. Of light reflected
from other surfaces. (Global illumination). Diffuse usually just the “color” of the surface. Specular determines highlight color.
Basic Surface Models
light. surface; global;
orlight vect vector;normal
diffuse;emissive;ambient;
color
)(
lsg
LN
DEA
C
AALNDDEAAC
i
islislssg ii
What’s Missing?What we’ve seen so far is just the basics of
geometric optics. Enough for classical ray tracing, Phong illumination
model. To get much better, we need more:
Better modeling of surface properties. Wavelength dependence. Radiometry / Photometry. Energy Transport.
Surface RoughnessAt a microscopic scale, all real surfaces are rough:
Cast shadows on themselves:
“Mask” reflected light:shadow shadow
Masked Light
Surface RoughnessNotice another effect of roughness:
Each “microfacet” is treated as a perfect mirror. Incident light reflected in different directions by
different facets. End result is mixed reflectance.
Smoother surfaces are more specular or glossy. Random distribution of facet normals results in diffuse
reflectance.
Reflectance Distribution ModelMost surfaces exhibit complex reflectances.
Vary with incident and reflected directions. Model with combination:
+ + =
specular + glossy + diffuse = reflectance distribution
AnisotropySo far we’ve been considering isotropic
materials. Reflection and refraction invariant with respect to
rotation of the surface about the surface normal vector.
For many materials, reflectance and transmission are dependent on this azimuth angle: anisotropic reflectance/transmission.
Examples?
BRDFBidirectional Reflectance Distribution Function(x, i, o)
x is the position. i = (i, i) represents the incoming direction.
(elevation, azimuth) o = (o, o) represents the outgoing direction
(elevation, azimuth)
Properties of the BRDFDependent on both incoming and outgoing
directions: bidirectional.Always positive: distribution function.Invariant to exchange of incoming/outgoing
directions: reciprocity principal.In general, BRDFs are anisotropic.
Dimensionality of BRDFFunction of position (3D), incoming, outgoing
directions (4 angles), wavelength, and polarization. Thus, a 9D function! Usually simplify:
Ignore polarization (geometric optics!). Sometimes ignore wavelength. Assume uniform material (ignore position). Isotropic reflectance makes one angle go away.
Radiometry Radiometry: Science of measurement of light.
Measurements are purely physical. Discusses quantities like radiance and irradiance, flux,
and radiosity. Need some radiometry to go into more detail about
BRDF. Combine with light transport theory and optics to derive
radiosity computations. More in later lectures and in COMP238.
Radiometry vs. PhotometryPhotometry: Science of human perception of
light. Perceptual analog of Radiometry. All measurements relative to perception.
More in COMP238
ColorIf we stopped here we’d have grayscale images.
Color is determined by the wavelength of visible light. Can still use geometric optics.
But need to account for wavelength in reflectance (BRDF) and index of refraction.
What natural phenomena can you think of that are wavelength dependent?
Sampling WavelengthWe could try to compute image for every
possible wavelength and then combine. Would take forever.
Sample a representative set of wavelengths. How many samples? Where?
Where to Sample?Photometry tells us that some wavelengths are
more important than others to human perception. Human response curve looks something like this:
350 400 450 500 550 600 650 700 750
Where to Sample?So, pick a few samples wavelengths.
Compute an image for each. Reconstruct with basis functions. Weight of each sample determined by human
response curve. (Also need color
space transformations). More in COMP238.
350 400 450 500 550 600 650 700 750
Light Transport To compute images, we need to simulate transport of light
around a scene. Transport theory.
Analysis techniques for flow of moving particles in 3D. Largely developed for neutrons in atomic reactors. Can be applied to traffic flow, gas dynamics. Most importantly, can be applied to light.
Simulation techniques. Ray tracing. Radiosity. Combinations and variations.
Local vs. Global Illumination Radiosity and ray tracing simulate global illumination.
Account for light transport between objects. Not just between light sources and objects: local illumination.
Don’t need global illumination to use the concepts of geometric optics, surface modeling, and BRDF.
Have been used to create diverse shading models. Simplest and most common is Phong. Next lecture: shading models.
For Next Time… Read:
Henri Gouraud, “Continuous Shading of Curved Surfaces”. IEEE Transactions on Computers; June 1971.
Bui Tuong Phong, “Illumination for Computer Generated Pictures”. Communications of the ACM; June 1975.
James F. Blinn, “Models of Light Reflection for Computer Synthesized Pictures.” Computer Graphics (SIGGRAPH 1977).
ReferencesGlassner, Principles of Digital Image Synthesis,
Volume Two. Highly detailed and low level.
Cohen and Wallace, Radiosity and Realistic Image Synthesis.
Bastos dissertation, ftp://ftp.cs.unc.edu/pub/publications/techreports/00-021.pdf
More Detail: ScatteringWhen a photon hits an atom, one of two things
happens: Absorption: the photon (energy) is converted into
another form of energy. Scattering: the photon is immediately re-emitted in a
new direction.