Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Technical Guide | L1LiftSlide DoorsLLiftSlide Doors
Technical Guide L
L2 | Technical Guide Technical Guide | L3LiftSlide DoorsLiftSlide Doors
Standards
Units have been tested by an independent laboratory
for thermal performance, air infiltration, water infiltration
and structural performance.
Frame
Thermally efficient fiberglass frame and sill with Coastal
Douglas Fir interior.
Alternate Species
The entire Loewen product line is also available in optional
Mahogany.
Preservative Treated
All wood parts are dipped in approved preservative.
Door Panels
Opening panels are equipped with 3G corrosion resistant
stainless steel wheel assemblies with flat resistant wheels
and precision bearings. Aircraft grade aluminum extrusions
with VG Douglas Fir Interior (Mahogany option available).
Optional all wood construction available. Stiles are
3 1/2” (89 mm) wide x 3 3/16” (82 mm) high for extra
strength and durability.
Glazing
With countless glazing configurations and LowE coating
options, we ensure that you can choose the perfect blend
of protection and comfort.
Insulating Glass
Double or triple insulating tempered glass configurations,
with 1/2” (13 mm) airspace.
LowE Systems
LowE best describes the benefits of the product that
incorporates glazing coatings and Argon gas. LowE
systems help reduce heating and cooling costs, providing
superior energy efficiency.
Simulated Divided Lites (SDL)
Standard SDL complete with airspace grilles. Grille bars
are permanently applied to the interior and exterior.
Metal Cladding
Heavy duty exterior metal cladding comprised of extruded
aluminum is available in a variety of Palette colors,
including anodized and Cyprium™ (copper and bronze
cladding). Interior of the door can be natural wood
(unfinished) or primed.
Sills
Sills available in several corrosion resistant options.
Flush tracks available in 1 1/2” (39 mm) versions with
transverse drains with 18” (457 mm) drainage tubes.
Fiberglass raised sills available for regions with more
inclement weather conditions and colder climates.
Hardware
Durable, corrosion resistant hardware designed to
withstand the elements providing nearly effortless
operation. The solid brass Marcos handle is available in
both removable and fixed configurations in three finishes:
Bright Brass, Oil Rubbed Bronze and Satin Nickel.
Complementary edge pulls assist in sliding the door from
a pocket. The stainless steel wheel mechanisms feature
deformation resistant wheels and precision bearings to
ensure smooth performance.
Weatherstrip
Flexible weatherstrip ensures maximum protection against
air and water infiltration.
Screen
Multi-function retractable screen available.
Product Features Specifications
Visit the Loewen Photo Gallery online at www.loewen.com for a large collection of Loewen product and elevation photography.Numerous custom window configuration opportunities exist — please contact your Authorized Loewen Dealer. Specifications and technical information are subject to change without notice. Imperial and metric measurements are converted accurately. However, in some cases, industry standards cause a 1 mm variance. (Example: 3/4" is shown as 19 mm for all glass measurements.) Cad Download: www.loewen.com/architect | Installation Instructions: www.loewen.com
Styles
Jamb or pocketing, single or multi-panel systems in
stacking, bi-parting or corner configurations.
Standard Features
• 6063 T5 aircraft grade aluminum extrusions
• Thermally broken aluminum panels
• Corrosion resistant track with standard transverse drains
• Thermally efficient fiberglass raised threshold with
integrated drainage
• Flexible gasket material
• 3 1/2" (89 mm) wide x 3 3/16" (82 mm) thick stiles
(4" (102 mm) wide with Back Cap)
• Robust hardware handles a maximum weight of 850
lbs per panel
• Recommended maximum panel size with standard
glass is 88" (2235 mm) wide or 88" (2235 mm) tall and
70 square feet of glass
• Corrosion resistant stainless steel wheel assemblies
with deformation resistant wheels and precision bearings
• Optional all-wood panels
Hardware
The solid brass Marcos handle is available in both
removable and fixed configurations in two finishes: Oil
rubbed Bronze and Satin Nickel. Optional solid bronze
Flush Handle is available in: White Bronze Brushed, Bronze
Dark Lustre and Silicone Bronze Dark.
See the Hardware in section A for more information.
Glazing
LowE Double, LowE Triple and StormForce™.
Simulated Divided Lites (SDL)
Ogee Profile — 3/4" (19 mm), 1 1/8" (30 mm), 2" (51 mm).
Putty Profile — 5/8" (16 mm), 7/8" (22 mm), 1 1/8" (30 mm),
2" (51 mm).
Square Profile (interior only) — 3/4" (19 mm), 7/8" (22 mm),
1 1/8" (30 mm), 2" (51 mm).
Metal Clad Color Spectrum
All Palette colors, including anodized finishes. Available in
Cyprium Collection.
LiftSlide
VARIABLES
Function
Use for Egress
Available with Screen
Durability
Low Maintenance Metal Clad Exterior
Clear Douglas Fir Exterior Finish
Clear Mahogany Exterior Finish
Primed Exterior Finish
Cyprium Collection
Performance
LowE Double
LowE Triple
StormForce™
Appearance
SDL
Vertical Grain Fir Panel
LiftSlide
HARDWARE STYLES
Marcos Handle
Flush Handle
Standard Optional
Finish Options: Refer to Section A.
L4 | Technical Guide Technical Guide | L5LiftSlide DoorsLiftSlide Doors
Note: • Drawings shown are typical details.• Additional sizes and configurations available.• Screen options may be available depending on size and configuration.• Raised threshold available with a maximum of 6 panels per sill
(12 in a bi-parting configuration; 2 per track).• Consult your Authorized Dealer for details.• All dimensions to have +/- 1/16” (2 mm) tolerance.• O = Fixed• X = Operating• P = Pocketing
Liftslide Door Detail
Liftslide Door Detail
Head & Sill Detail Glazing Stop Options
Plan View PLAN VIEW
HEAD & SILL DETAIL
11 1
/4"
[286
]
1/2"
[13]1 5/16"
[34]
System Width
Rough Opening
3 3/
16"
[81]
[34]
1 5/16"
1/2"
[13]
3 1/2"
Shi
m S
pace
[89]
Shi
m S
pace
STRAIGHT HEAD
3 1/2"
[89]
[127]
5" VISIBLE GLASS 4"
[102]
VISIBLE GLASS 4"
[102]
VISIBLE GLASS 5"
[127]
M4
LIFTSLIDE DOOR DETAILS
GLAZING STOP OPTIONS
SQUARE
PUTTY
OGEE
3 1/
2"
[89]
2 3/
16"
[56]
5 7/
16"
[139
]
11 1/4"
[286]
1 5/
16"
[34]
5/8"
[16]
1/2"
[13]Shim Space
Sys
tem
Hei
ght
Rou
gh O
peni
ng
3/16" [5]
3 3/16"
[81]
3 1/
2"
[89]
VIS
IBLE
GLA
SS
FIN
ISH
ED
FLO
OR
TO
TO
P O
F H
EA
DE
R
OXX FLUSH TRACK
MAX EXTERIORFINISH FLOOR
1 1/
2"
[38]
12 3/16"
[309]
RECOMMENDEDFINISH FLOOR
1 1/2"
[38]
DE
PR
ES
SIO
N D
EP
TH 2
1/2
"
[64]
1/2"
[13]
DRILL 1" DIAMETER HOLES INCONCRETE APPROX. 34" DEEP ANDEPOXY IN ADJUSTMENT BOLTS
1 1/2"
[38]
7/8"
[22]
PLAN VIEW
HEAD & SILL DETAIL
11 1
/4"
[286
]
1/2"
[13]1 5/16"
[34]
System Width
Rough Opening
3 3/
16"
[81]
[34]
1 5/16"
1/2"
[13]
3 1/2"
Shi
m S
pace
[89]
Shi
m S
pace
STRAIGHT HEAD
3 1/2"
[89]
[127]
5" VISIBLE GLASS 4"
[102]
VISIBLE GLASS 4"
[102]
VISIBLE GLASS 5"
[127]
M4
LIFTSLIDE DOOR DETAILS
GLAZING STOP OPTIONS
SQUARE
PUTTY
OGEE
3 1/
2"
[89]
2 3/
16"
[56]
5 7/
16"
[139
]
11 1/4"
[286]
1 5/
16"
[34]
5/8"
[16]
1/2"
[13]Shim Space
Sys
tem
Hei
ght
Rou
gh O
peni
ng
3/16" [5]
3 3/16"
[81]
3 1/
2"
[89]
VIS
IBLE
GLA
SS
FIN
ISH
ED
FLO
OR
TO
TO
P O
F H
EA
DE
R
OXX FLUSH TRACK
MAX EXTERIORFINISH FLOOR
1 1/
2"
[38]
12 3/16"
[309]
RECOMMENDEDFINISH FLOOR
1 1/2"
[38]D
EP
RE
SS
ION
DE
PTH
2 1
/2"
[64]
1/2"
[13]
DRILL 1" DIAMETER HOLES INCONCRETE APPROX. 34" DEEP ANDEPOXY IN ADJUSTMENT BOLTS
1 1/2"
[38]
7/8"
[22]
PLAN VIEW
HEAD & SILL DETAIL
11 1
/4"
[286
]
1/2"
[13]1 5/16"
[34]
System Width
Rough Opening
3 3/
16"
[81]
[34]
1 5/16"
1/2"
[13]
3 1/2"
Shi
m S
pace
[89]
Shi
m S
pace
STRAIGHT HEAD
3 1/2"
[89]
[127]
5" VISIBLE GLASS 4"
[102]
VISIBLE GLASS 4"
[102]
VISIBLE GLASS 5"
[127]
M4
LIFTSLIDE DOOR DETAILS
GLAZING STOP OPTIONS
SQUARE
PUTTY
OGEE
3 1/
2"
[89]
2 3/
16"
[56]
5 7/
16"
[139
]
11 1/4"
[286]
1 5/
16"
[34]
5/8"
[16]
1/2"
[13]Shim Space
Sys
tem
Hei
ght
Rou
gh O
peni
ng
3/16" [5]
3 3/16"
[81]
3 1/
2"
[89]
VIS
IBLE
GLA
SS
FIN
ISH
ED
FLO
OR
TO
TO
P O
F H
EA
DE
R
OXX FLUSH TRACK
MAX EXTERIORFINISH FLOOR
1 1/
2"
[38]
12 3/16"
[309]
RECOMMENDEDFINISH FLOOR
1 1/2"
[38]
DE
PR
ES
SIO
N D
EP
TH 2
1/2
"
[64]
1/2"
[13]
DRILL 1" DIAMETER HOLES INCONCRETE APPROX. 34" DEEP ANDEPOXY IN ADJUSTMENT BOLTS
1 1/2"
[38]
7/8"
[22]
Head & Sill Detail
Plan View
LIFTSLIDE DOOR DETAILS
PLAN VIEW
HEAD & SILL DETAILS
PXX FLUSH TRACK PXX RAISED THRESHOLD
PXX STRAIGHT HEAD
EXTERIOR
INTERIOR
RECOMMENDEDFINISH FLOOR
DRILL 1" DIAMETER HOLES INCONCRETE APPROX. 34" DEEP ANDEPOXY IN ADJUSTMENT BOLTS
BOTTOM OF HEADER
FINISH FLOORMAX EXTERIOR
2% SLOPE
VISTA VIEW SCREEN
VISTA VIEW SCREEN
FINISHEDFLOOR
EXTERIORFLOOR
Shim Space
Shim Space
INTERIOR
EXTERIOR
BOTTOM OF HEADER
TRIM BY OTHERS1 1/2" x 1 5/16"
TRIM BY OTHERS3 5/8" x 1 1/2"
1 1/
4" [3
2mm
]
DEP
RES
SIO
N D
EPTH
1 3
/4" [
45m
m]
2 3/
16"
[56]
VISI
BLE
GLA
SS
[81]
3 3/16"
5 7/
16"
[139
][8
9]
3 1/
2"
7/8"
[23]
1 1/
2" [3
8]
BOTT
OM
OF
PAN
EL T
O B
OTT
OM
OF
HEA
DER
[31]
1 1/4"
Pocket 9 5/8" [245]
RO
UG
H O
PEN
ING
SYST
EM H
EIG
HT
[13]
1/2"
[229]
9"
[16]
5/8"
Head 9 11/16" [246]
[355
]
14"
JAM
B W
IDTH
7 7
/16"
[188
]
SHIM SPACE 1/2" [13]
SCREEN SYSTEM WIDTHSHIM SPACE 1/2" [13]
[89]
3 1/2"
[81]
3 3/
16"
[127]
5"VISIBLE GLASS
[102]
4"VISIBLE GLASS
[89]
3 1/2"
1 5/16" [34]
2 3/
8" [6
1]
ROUGH OPENING
NET FRAME
POC
KET
WID
TH 9
1/8
" [2
32]
1/2" [13]
1/2" [13]
1 5/8" [42]
[105
]
4 1/
8"
SHIM
SPA
CE
1/2"
[13m
m]
HEAD WIDTH 9 11/16" [246mm]
POCKET WIDTH 9 1/8" [232mm]
5 5/
16" [
135m
m]
3 1/
2" [8
9mm
]
7/8"
[22m
m]
SHIM
SPA
CE
1/2"
[13m
m]
RO
UG
H O
PEN
ING
SYST
EM H
EIG
HT
1 1/2" [38mm] DEP
RES
SIO
N D
EPTH
2 1
/2" [
64m
m]
1/2"
[13m
m]
8 3/8" [212mm]1 1/2" [38mm]
1 1/
2" [3
8mm
]
BOTT
OM
OF
PAN
EL T
O B
OTT
OM
OF
HEA
DER
LIFTSLIDE DOOR DETAILS
PLAN VIEW
HEAD & SILL DETAILS
PXX FLUSH TRACK PXX RAISED THRESHOLD
PXX STRAIGHT HEAD
EXTERIOR
INTERIOR
RECOMMENDEDFINISH FLOOR
DRILL 1" DIAMETER HOLES INCONCRETE APPROX. 34" DEEP ANDEPOXY IN ADJUSTMENT BOLTS
BOTTOM OF HEADER
FINISH FLOORMAX EXTERIOR
2% SLOPE
VISTA VIEW SCREEN
VISTA VIEW SCREEN
FINISHEDFLOOR
EXTERIORFLOOR
Shim Space
Shim Space
INTERIOR
EXTERIOR
BOTTOM OF HEADER
TRIM BY OTHERS1 1/2" x 1 5/16"
TRIM BY OTHERS3 5/8" x 1 1/2"
1 1/
4" [3
2mm
]
DE
PR
ES
SIO
N D
EP
TH 1
3/4
" [45
mm
]
2 3/
16"
[56]
VIS
IBLE
GLA
SS
[81]
3 3/16"
5 7/
16"
[139
][8
9]
3 1/
2"
7/8"
[23]
1 1/
2" [3
8]
BO
TTO
M O
F P
AN
EL
TO B
OTT
OM
OF
HE
AD
ER
[31]
1 1/4"
Pocket 9 5/8" [245]
RO
UG
H O
PE
NIN
G
SY
STE
M H
EIG
HT
[13]
1/2"
[229]
9"
[16]
5/8"
Head 9 11/16" [246]
[355
]
14"
JAM
B W
IDTH
7 7
/16"
[188
]
SHIM SPACE 1/2" [13]
SCREEN SYSTEM WIDTHSHIM SPACE 1/2" [13]
[89]
3 1/2"
[81]
3 3/
16"
[127]
5"VISIBLE GLASS
[102]
4"VISIBLE GLASS
[89]
3 1/2"
1 5/16" [34]
2 3/
8" [6
1]
ROUGH OPENING
NET FRAME
PO
CK
ET
WID
TH 9
1/8
" [2
32]
1/2" [13]
1/2" [13]
1 5/8" [42]
[105
]
4 1/
8"
SH
IM S
PA
CE
1/2
" [13
mm
]
HEAD WIDTH 9 11/16" [246mm]
POCKET WIDTH 9 1/8" [232mm]
5 5/
16" [
135m
m]
3 1/
2" [8
9mm
]
7/8"
[22m
m]
SH
IM S
PA
CE
1/2
" [13
mm
]
RO
UG
H O
PE
NIN
G
SY
STE
M H
EIG
HT
1 1/2" [38mm] DE
PR
ES
SIO
N D
EP
TH 2
1/2
" [64
mm
]
1/2"
[13m
m]
8 3/8" [212mm]1 1/2" [38mm]
1 1/
2" [3
8mm
]
BO
TTO
M O
F P
AN
EL
TO B
OTT
OM
OF
HE
AD
ER
• The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide and Bifold doors have unique requirements. Structural headers that allow for deflection no greater than 1/8” along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large opening units.
• Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide and Bifold doors. Site specifications are the responsibility of building professionals or engineers to determine.
Note: • Drawings shown are typical details.• Additional sizes and configurations available.• Screen options may be available depending on size and configuration.• Raised threshold available with a maximum of 6 panels per sill
(12 in a bi-parting configuration; 2 per track).• Consult your Authorized Dealer for details.• All dimensions to have +/- 1/16” (2 mm) tolerance.• O = Fixed• X = Operating• P = Pocketing
• The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide and Bifold doors have unique requirements. Structural headers that allow for deflection no greater than 1/8” along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large opening units.
• Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide and Bifold doors. Site specifications are the responsibility of building professionals or engineers to determine.
L6 | Technical Guide Technical Guide | L7LiftSlide DoorsLiftSlide Doors
Liftslide Door Detail
Liftslide Detail
Head & Sill Detail
Plan View
Plan View
Plan View
Glazing Stop Options
Note: • Drawings shown are typical details.• Additional sizes and configurations available.• Screen options may be available depending on size and configuration.• Raised threshold available with a maximum of 6 panels per sill
(12 in a bi-parting configuration; 2 per track).• Consult your Authorized Dealer for details.• All dimensions to have +/- 1/16” (2 mm) tolerance.• O = Fixed• X = Operating• P = Pocketing
• The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide and Bifold doors have unique requirements. Structural headers that allow for deflection no greater than 1/8” along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large opening units.
• Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide and Bifold doors. Site specifications are the responsibility of building professionals or engineers to determine.
Note: • Drawings shown are typical details.• Additional sizes and configurations available.• Screen options may be available depending on size and configuration.• Raised threshold available with a maximum of 6 panels per sill
(12 in a bi-parting configuration; 2 per track).• Consult your Authorized Dealer for details.• All dimensions to have +/- 1/16” (2 mm) tolerance.• O = Fixed• X = Operating• P = Pocketing
• The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide and Bifold doors have unique requirements. Structural headers that allow for deflection no greater than 1/8” along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large opening units.
• Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide and Bifold doors. Site specifications are the responsibility of building professionals or engineers to determine.
L8 | Technical Guide Technical Guide | L9LiftSlide DoorsLiftSlide Doors
Rough Opening
(3' Panels)
Head Width (3' Panels,
No Screens)
Finish Pocket Width
Rough Opening
(4' Panels)
Head Width (4' Panels,
No Screens)
Finish Pocket Width
PANELS CONFIGURATION STYLE FRAME TYPE X
2 OX OR XO STACKING JAMB73
[1854]7 7/16[189]
-97
[2464]7 7/16[189]
-
3 OXX OR XXO STACKING JAMB106
[2692]11 1/4[286]
-142
[3607]11 1/4[286]
-
4 OXXX OR XXXO STACKING JAMB139
[3531]15 1/8[384]
-187
[4750]15 1/8[384]
-
5 OXXXX OR XXXXO STACKING JAMB172
[4369]19
[483]-
232[5893]
19 [483]
-
6 OXXXXX OR XXXXO STACKING JAMB205
[5207]22 13/16
[579]-
277[7036]
22 13/16[579]
-
4 OX-XO BI-PARTING JAMB142 3/16[3612]
7 7/16[189]
-190 3/16
[4831]7 7/16[189]
-
6 OXX-XXO BI-PARTING JAMB208 3/16[5288]
11 1/4[286]
-280 3/16
[7117]11 1/4[286]
-
8 OXXX-XXXO BI-PARTING JAMB274 3/16[6964]
15 1/8[384]
-370 3/16[9403]
15 1/8[384]
-
10 OXXXX-XXXXO BI-PARTING JAMB340 3/16
[8641]19
[483]-
460 3/16[11689]
19[483]
-
12 OXXXXX-XXXXXO BI-PARTING JAMB406 3/16[10317]
22 13/16[579]
-550 3/16[13975]
22 13/16[579]
-
1 PX OR XP STACKINGSINGL
POCKET39 11/16[1008]
8 1/16[205]
7 1/16[179]
51 11/16[1313]
8 1/16[205]
7 1/16[179]
2 PXX OR XXP STACKINGSINGLE POCKET
72 11/16[1846]
9 11/16[246]
9 1/8[232]
96 11/16[2456]
9 11/16[246]
9 1/8[232]
3 PXXX OR XXXP STACKINGSINGLE POCKET
105 11/16[2684]
13 1/2[343]
13[330]
141 11/16[3599]
13 1/2[343]
13[330]
4 PXXXX OR XXXXP STACKINGSINGLE POCKET
138 11/16[3523]
17 3/8[441]
16 13/16[427
186 11/16[4742]
17 3/8[441]
16 13/16[427]
5PXXXXX OR
XXXXXPSTACKING
SINGLE POCKET
171 11/16[4361]
21 1/4[540]
20 11/16[525]
231 11/16[5885]
21 1/4[540]
20 11/16[525]
6PXXXXXX
OR XXXXXXPSTACKING
SINGLE POCKET
204 11/16[5199]
25 1/16[637]
24 9/16[624]
276 11/16[7028]
25 1/16[637]
24 9/16[624]
2 PX-XP BI-PARTINGDUAL
POCKET75 1/2[1918]
-7 1/16[179]
99 1/2[2527]
-7 1/16[179]
4 PXX-XXP BI-PARTINGDUAL
POCKET141 1/2[3594]
-9 1/8[232]
189 1/2[4813]
-9 1/8[232]
6 PXXX-XXXP BI-PARTINGDUAL
POCKET207 1/2[5271]
-13
[330]279 1/2 [7099]
-13
[330]
8 PXXXX-XXXXP BI-PARTINGDUAL
POCKET273 1/2[6947]
-16 13/16
[427]369 1/2[9385]
-16 13/16
[427]
10 PXXXXX-XXXXXP BI-PARTINGDUAL
POCKET339 1/2[8623]
-20 11/16
[525459 1/2[11671]
-20 11/16
[525]
12 PXXXXXX-XXXXXXP BI-PARTINGDUAL
POCKET405 1/2[10300]
-24 9/16[624]
549 1/2[13957]
-24 9/16[624]
Liftslide Door Detail
Liftslide Door Detail
Plan View
Note: • O = Fixed• X = Operating• P = Pocketing
• The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide and Bifold doors have unique requirements. Structural headers that allow for deflection no greater than 1/8” along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large opening units.
• Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide and Bifold doors. Site specifications are the responsibility of building professionals or engineers to determine.
Typical Sizes
Additional heights available. Consult your Authorized Loewen Dealer for details.
PANEL HEIGHTROUGH OPENING HEIGHT
(1" FLUSH TRACK)ROUGH OPENING HEIGHT
(1 1/2" FLUSH TRACK)ROUGH OPENING HEIGHT
(RAISED THRESHOLD)
84 [2134] 87 15/16 [2234] 88 7/16 [2246] 88 7/16 [2246]
96 [2438] 99 15/16 [2538] 100 7/16 [2551] 100 7/16 [2551]
108 [2743] 111 15/16 [2843] 112 7/16 [2856] 112 7/16 [2856]
120 [3048] 123 15/16 [3148] 124 7/16 [3161] 124 7/16 [3161]
144 [3658] 147 15/16 [3758] 148 7/16 [3770] 148 7/16 [3770]
Additional configurations and sizes available. Consult your Authorized Loewen Dealer for details.
Note: • Drawings shown are typical details.• Additional sizes and configurations available.• Screen options may be available depending on size and configuration.• Raised threshold available with a maximum of 6 panels per sill
(12 in a bi-parting configuration; 2 per track).• Consult your Authorized Dealer for details.• All dimensions to have +/- 1/16” (2 mm) tolerance.• O = Fixed• X = Operating• P = Pocketing
• The preparation of the rough opening for large openings such as those required by, but not limited to, LiftSlide and Bifold doors have unique requirements. Structural headers that allow for deflection no greater than 1/8” along the unsupported length once the header is fully loaded are required. Special care needs to be taken when installing any unit including transoms above such large opening units.
• Loewen is not responsible for site measurements or the determination of structural and architectural requirements for the installation of large opening products such as but not limited to, Liftslide and Bifold doors. Site specifications are the responsibility of building professionals or engineers to determine.
loewen.com