TRUCK CRANES FOR RECYCLING AND TIMBER HAULAGEIssue 5, April 2019

LIFTING POWER FOR THE FUTURE

THE NEW GENERATION OF TRUCK CRANES HAS ARRIVEDOur new programme for truck cranes has been completed and has been developed for both transport and materials handling. The cranes have been specially produced for trucks and consist of modern, tried-and-tested technologies and world-class hydraulics. In our develop-ment work we have focussed on the operator, contractors and the environment. We have put great emphasis into class-leading driving properties, performance, high productivity and sustainability.

Cranab's extensive, solid crane-building experience is your guarantee of quality, develop-ment and long-term investment. Each of our cranes is manufactured with precision and is tested in tough Nordic climatic conditions to suit professional users.

This is Swedish quality from Vindeln at its best.

TRUCK CRANES TO HANDLE ALMOST ANYTHINGOur truck cranes are equally useful in the forest as they are in industrial areas, and they move just as gracefully in urban environments as in the countryside. The cranes can easily handle everything from timber and scrap to large containers.

Irrespective of the task involved, the work is carried out from start to finish with great precision and a high degree of performance. The truck cranes' reach makes Cranab one of the market leaders in its class. The impressive reach significantly improves loading and unloading.

The cranes are robust, versatile, lightweight, yet they meet the highest demands of both safety and environment. They are developed with the focus on quality, operational reliability and service-friendliness.

3

1 2

CRANAB TL12Cranab's L-formed truck crane always puts you one step ahead: It is powerful, versatile and flexible, service-friendly and safe. The L-crane always comes fitted with a torque linkage, which makes it extra powerful and dependable, especially in deep lifting scenarios. Just like the Z-crane it features internal piping and hose routings as standard.

1. TORQUE LINKAGE. Link between the pillar and boom for increased power in all situations. The power link means uniform movement and speed right across the working range, enabling good operating characteristics.

2. INTERNAL ROUTING. Hoses and pipes protected through internal routing throughout the boom system. Slide blocks adjustable from outside the boom. Adjust-ments are easily made from the outside using an Allen key to make the crane steady and stable.

3. LEADING REACH. Cranab is one of few manufacturers able to offer a full 10 metre reach.

L-CRANES

3 4

4

2

1

CRANAB TZ12 With Cranab's Z-crane you will achieve high productivity from the outset. The crane extends quickly and enables efficient production using extensively tested hydraulics and leading operating proper-ties. Thanks to its compact design and the Z-crane's unique park-ing position you are able to take a maximum load every time.

1. EFFICIENCY. Compact parking position.

2. INTERNAL ROUTING. Hoses and pipes protected through internal routing throughout the boom system.

3. COMPACT. Hoses and pipes also pro-tected throughout the crane column.

4. LEADING REACH. One of few cranes with an entire 10.5 meter reach.

Z-CRANES

1

3

2

5

4

7

6

ENGINEERED AND DEVELOPED FOR THE TOUGHEST JOBSCranab's truck cranes put you one step ahead: They are designed to be strong, robust and powerful. The cranes are built based on a proven and safe technology, which is both modern and efficient. Significant emphasis has been put into the cranes being operationally reliable, dependable and service-friendly.

1. TORQUE LINKAGE. Link between the pillar and boom for increased power in critical situations. The power link means uniform movement and speed right across the working range, which equates to good operating characteristics close up.

2. INCREASED SPEED. 1/2” hoses and pipes to the grapple throughout the boom system. A solution unique to Cranab's cranes.

3. DOUBLE SLEWING SYSTEM. End po-sition damping for the slew function. This means gentler stops at the end position.

4. PROTECTED STABILZER LEG BEAM. Internal hose routing in the stabilzer leg beam for beam widening and stabilizer leg cylinders at a 45 degree retraction. Also available with external hose routing.

5. SLEWING MOTOR. Slewing motor with double slewing systems, with a 425 degree slewing angle. Details adapted from forestry forwarder technology.

6. THREE-POINT YOKE. Secure stabilizer beam with three-point yoke to counteract torsion in the truck chassis.

7. PINS OF THE HIGHEST CLASS. Generously dimensioned and holed pins – nitrocarburized for improved durability and corrosion protection. Low friction means reduced wear on bushings.

STRENGTH AND PERFORMANCE

3

2

1

2

3

1

3

OPERATOR'S POSITION

1. OPERATOR'S CAB. The cab is spacious, bright and well ventilated. It can be configured according to require-ments. Water or diesel heater and AC are optional extras. The cab affords a very agreeable working environment.

2. CAB FOR ELECTRICAL OPERATION. Cab for electrically-operated crane.

3. CAB FOR MECHANICAL OPERATION. Cab for mechanically-operated crane.

1. SIDE MOUNTED. A side-mounted operator's position gives the best possible overview of specific applications.

2. CENTRE-MOUNTED. The open opera-tor's position is comfortable, ergonomic operator's position with a tight rotation area.

3. CANOPY. The open operator's posi-tion can be fitted with a crane canopy as a practical and safe protection against strong sunlight, rain, snow or wind.

OPEN OPERATOR'S POSITION OPERATOR'S CAB

4

2

1 2

1

5

3

6

3

7

1. LCD. Distinct screen displaying, inter alia, crane settings for electrically-operated cranes.

2. JOYSTICK. Ergonomic joystick with buttons for versatile crane operation.

3. MECHANICAL CRANE OPERATION. 2+2 control, alternatively 4+2 control.

4. ACTIVATION LOCK. Safety device when operating the stabilzer leg valve.

5. CONTROL BOX. Operation of, inter alia, stabilzer leg valve from the operator’s position.

6. PANEL. Distinct buttons inside the cab.

7. RADIO CONTROL. Operate crane by radio.

OPERATION AND SAFETY

• Sensor for stabilzer beam's park-ing position.

• Sensor for main boom position.• Overload indicator.• Position indicator.• Hose breach valve for lift function.• Emergency stop.• Seat sensor.

• Sensor for parking position and operating position.

• Sensor for stabilzer leg cylinder, lower.

• Sensor for main boom position.• Pilot-controlled check valve for lift

arm and boom.• Stability control for monitoring and

stability.• Sensor for slewing position.• Position indicator.

CE KIT FOR RECYCLING WORK

1. PILOT-CONTROLLED CHECK VALVE. Safety system for recycling work. For safe crane operation.

2. STABILITY CONTROL. For monitor-ing stability.

3. SLEWING POSITION. Sensor for slewing position.

COMMON FUNCTIONS CE KIT FOR FORESTRY WORK

5 6

2

4

31

OPTIONAL EXTRAS

SELECT FEATURES FOR YOUR SPECIFIC NEEDSBecause it's important to us that your truck crane lives up to your expectations. We make certain you get the best possible support before you make a decision. There are many options, and together we're able to tailor a solution that’s perfect for your own specific requirements and needs. You call the shots.

1. STABILIZER RETRACTION. 180° stabilizer retraction with external hose runs.

2. VERTICAL EXTENSION. Extension by 30, 45 or 60 degrees.

3. STABILIZER LEG VALVE. Electrically/manually operated stabilizer

leg valve. 4-6-8 sections adapted to 1-circuit, 2-circuit and LS systems.

4. LIGHTING OPTIONS. Work lights on front of boom and operator's position. Rear-facing lights available. Choose between halogen and LED.

5. WEIGHT LINKAGE. Weighing linkage

• Crane cab with mounting position as required. Purchaser chooses between cab or open operator's position.

• Canopy/rain shelter for open opera-tor's position.

• Heated seat for open operator's posi-tion.

• Work lights on front of boom and around operator's position. Choose between halogen and LED.

• Crane arm and boom available in other colours. Standard colour is red.

• Motor start/stop and rpm control.

OPTIONS

• Extension of stabilizer leg, 30, 45, 60 or 180 degrees.

• Internal hose routing inside the sta-bilzer beam.

• Rotator and linkage options, all with protected hose routings.

• Weighing link with radio transmission to digital scales.

• Grapple.• Consoles for crane installation.• Installation bolts M30x1.5.

at crane nose senses the weight of the load in the grapple.

6. ROTATORS. Other rotator and link options, all with protected hose routings.

A B C D E

TZ 2099 mm 1620 mm 1450 mm 709 mm 1564 mm

TL 1926 mm 1447 mm 1277 mm 789 mm 1391 mm

C Vy uppifrån tillkom 2017-03-15 ToA

4709221

R1140

A

B

1150

R590

R1280

R510

R570

R1175

R905

R530

R1020

R1150

1002

470

EC

D

A

D

2016-11-08ROTATING VOLUMETZ12 TOPSEAT CENTER

Ritningsnummer

Spare Part Datum

4709221

920 – 1070

2017-03-02Ritningsnummer

4709670

378

920 – 1070

JaS

2017-03-02DIMENSIONSROTATING VOLUMETZ12 TOPSEAT RIGHT

Jämföra

Ägare

Ritad

Ritningsnummer

Skärlängd

Spare Part

Totalvikt

Datum

Fixturnummer

Pos nr Artikel nr/ReferensTitel/BenämningAntal Material/Speci�kation Övrig/Dimension

Denna ritning får endast ändras iAutodesk Inventor

4709670

Reservation for changes. Errors and omissions excepted.

OPEN OPERATOR'S POSITION, TZ/TL

Right-hand mounted sitting position Centre-mounted sitting position

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

AntNr Godk.DatumÄndring

Denn

a ha

ndlin

g få

r in

te k

opie

ras

utan

vår

t sk

riftl

iga

medg

ivan

de o

ch d

ess

inne

håll

får

inte

ypp

asfö

r tr

edje

man

och

inte

hel

ler

anvä

ndas

för

någ

ot o

behö

rigt

ända

mål.

Toleranser för ej direkt toleranssatta mått

Bearbetade ytor SS- ISO 2768- 1 Medel

Svetsad konstruktion SS- EN- ISO 13920 Klass B

Svetssprut och andra föroreningar avlägsnas

Skarpa kanter brutna 0,2x45°

Svetsar utförda enligt SS- ISO 5817, kvalitetsnivå C där ej annat anges

A3

Bearbetadeytor

6,3

Jämföra

Ägare

Artikel nr/ ReferensRitad

Ritningsnummer

Skärlängd

Material/ Specif ikation Övrig/ Dimension

Spare Part

Totalvikt

Datum

dras iAutodesk Inventor JaS

2017- 03- 03

4709672

DIMENSIONSCABIN ROTATING VOLUMETL12

Fixturnummer

A 2017- 03- 03 JaS

AntNr Godk.DatumÄndring

Denn

a ha

ndlin

g få

r in

te k

opie

ras

utan

vår

t sk

riftl

iga

medg

ivan

de o

ch d

ess

inne

håll

får

inte

ypp

asfö

r tr

edje

man

och

inte

hel

ler

anvä

ndas

för

någ

ot o

behö

rigt

ända

mål.

Toleranser för ej direkt toleranssatta mått

Bearbetade ytor SS- ISO 2768- 1 Medel

Svetsad konstruktion SS- EN- ISO 13920 Klass B

Svetssprut och andra föroreningar avlägsnas

Skarpa kanter brutna 0,2x45°

Svetsar utförda enligt SS- ISO 5817, kvalitetsnivå C där ej annat anges

A3

Bearbetadeytor

6,3

Jämföra

Ägare

Artikel nr/ReferensRitad

Ritningsnummer

Skärlängd

Material/Specif ikation Övrig/Dimension

Spare Part

Totalvikt

Datum

dras iAutodesk Inventor JaS

2017- 03- 03

4709672

DIMENSIONSCABIN ROTATING VOLUMETL12

Fixturnummer

A 2017- 03- 03 JaS

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

567

2571

2247

1577

1517

657

R1320

R1320

R1350

R1373

320

310

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

3231

240

240

240

E

1090

560

DB

32

31

1090

560

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

1090

560

A C

3231

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

DB

32

31

1090

560

2016-04-22FIXING DIMENSION BASE -TRUCKTL/TZ 12

YesRitningsnummer

Spare Part Datum

4708545

3231

E

1090

560

Reservation for changes. Errors and omissions excepted.

Left position of pillar

Right position of pillar

Centre position of pillar

Right position of pillar

Centre position of pillar Stabilizer beam height

Three-point yoke. Centre position of pillar

Three-point yoke. Left- and right position of pillar

CAB, TZ/TL

MOUNTING DIMENSION

A B C D E

3,9m base 663 mm 715 mm 715 mm 663 mm 663 mm

5,1m base 796 mm 848 mm 848 mm 796 mm 796 mm

3118 – 6250 (10 m)

828

(8,3

m)

X

130°

TL12

TL12

8,3 115 kNm 8,3 m 1,57 m 425° 29,3 26 120–160 80-100 2 x 70 2415 kg*

10,0 106,4 kNm 10,0 m 3,1 m 425° 29,3 26 120–160 80-100 2 x 70 2535 kg*

TL12 3,0 m 4,0 m 5,0 m 6,0 m 7,0 m 8,0 m 9,0 m 10,0 m

8,3 3500 kg 2900 kg 2320 kg 1940 kg 1630 kg 1380 kg

10,0 3300 kg 2600 kg 2100 kg 1810 kg 1500 kg 1300 kg 1130 kg 970 kg

L1 L2 V X Y Z

880 670 0° – – 2530

880 670 30° 743 789 2525

880 670 45° 945 640 2510

880 670 60° 1085 440 2489

960 750 0° – – 2550

960 750 30° 782 858 2530

960 750 45° 1000 700 2515

960 750 60° 1160 480 2490

2016-06-20TL12.2 Broschyr

Ritningsnummer

Spare Part Datum

TL12.2

2016-06-20Ritningsnummer

Spare Part Datum

TL12.2

2016-06-20TL12.2 Broschyr

Ritningsnummer

Spare Part Datum

TL12.2 32

60 (1

0 m

)

L1

196

L2

2932

(10

m)

Y

2404

10065

3815

V

179

1000

5850 (8,3 m)

2245

LS 2-K1-K

2914 – 4480 (8,3 m)

2956

(8,3

m)

6076 (10 m)

936

(10

m)

3460

(8,3

m)

Reservation for changes. Errors and omissions excepted.

Z – 3880 SingleZ – 5090 Double

* = Weight with top seat. TL12 with cab 8,3 m = 2815 kg; 10 m 2935 kg.

A

775

L1L2

Z – 3880

D

2420

3300

B180

G24

90

F

TZ12

TZ12 A B C D E F G

7,7 7700 5134 2650 2562-5094 1189 3029 85

8,3 8315 6347 2380 3047-5013 1685 3420 735

9,3 9300 6165 2240 2862–5994 1495 3500 735

10,5 10500 6565 2610 3262–7195 1760 3200 735

340

TZ12 2,0 m 3,0 m 4,0 m 5,0 m 6,0 m 7,0 m 8,0 m 9,0 m 10,0 m m

7,7 4500 kg 3200 kg 2570 kg 2200 kg 1830 kg 1530 kg

8,3 3090 kg 2390 kg 2005 kg 1750 kg 1510 kg 1300 kg

9,3 3080 kg 2380 kg 1930 kg 1730 kg 1470 kg 1260 kg 1100 kg

10,5 2880 kg 2250 kg 1870 kg 1650 kg 1430 kg 1230 kg 1050 kg 900 kg

TZ12

7,7 110,5 kNm 7,7 m 2,53 m 425° 29,3 26 120–160 80–100 2 x 70 2450 kg*

8,3 108 kNm 8,3 m 1,97 m 425° 29,3 26 120–160 80–100 2 x 70 2425 kg*

9,3 102,8 kNm 9,3 m 3,1 m 425° 29,3 26 120–160 80–100 2 x 70 2475 kg*

10,5 99,7 kNm 10,5 m 3,9 m 425° 29,3 26 120–160 80–100 2 x 70 2515 kg*

LS 1-K 2-K

1933,3 kg

2016-11-10Ritningsnummer

Spare Part Datum

4709711

2016-11-10TZ12.2 Broschyr

Ritningsnummer

Spare Part Datum

4709711

E

2935

2470

C

2600 (7,7m)

908(double beam)

Reservation for changes. Errors and omissions excepted.

* = Weight with top seat. TZ12 with cab 7,7 m = 2850 kg; 8,3 m = 2825 kg; 9,3 m = 2875 kg; 10,5 m = 2915 kg.

EXPERIENCE. TECHNOLOGY. INNOVATION.Cranab’s factories are located in Vindeln, deep in the forests of West Bothnia. Here we develop and manufacture world-class cranes, grapples and land clearing machines. We are driven by a genuine passion for forestry and road clearance technology. We are also driven by an unyielding commitment to constantly push technology develop ment forwards. Although we are based in northern Sweden, we reach out to the whole world to be close to the customers we develop products for. We listen carefully to their requirements and draw on more than 50 years of experience and solid technological expertise to develop innovative products.

Experience, technological expertise and an unswerving determination to improve. This is a somewhat ingenious combination if you ask us.

Cranab Slagkraft is part of the CRANAB GROUP, which also includes Vimek and Bracke Forest. Today, the companies are world-leaders in their respective fields. Our common success factors are the development, manufacture and marketing of the best technical solutions for forestry and road clearance work.

Cranab ABSE-922 82 Vindeln, Sweden. Tel: +46 933 135 00info@cranab.se www.cranab.se