Upload
doannguyet
View
217
Download
3
Embed Size (px)
Citation preview
YANMAR True Zero Tail Swing Excavator
YANMAR - YOUR BEST PARTNER FOR BUILDING THE FUTURE
h
r
W
P
(Please note that the standard equipment may vary from this list. Consult your Yanmar dealer for confirmation.)
STANDARD EQUIPMENT
LIFTING CAPACITY
ViO75-A
Excavator equipped with ROPS/FOPS cabin and rubber crawlers.r: Reach from swing center line : ft-in(mm)h: Lift point height : ft-in(mm)w: Lifting capacity : lbs(kg)P: Load point
: Rated over front
: Rated over side
1.The rated lifting capacities that are indicated below are based on ISO 10567 and do not exceed 87% of the excavator's hydraulic lifting capacity or 75% of its static tilt load (tipping load) capacity.2.The following operating criteria are also applicable to the calculation of these maximum loads; a) The “load point“ is the location of the front bolt on the arm. b) The three indicated machine positions are : (i) arm over the front end (blade down), (ii) arm over the front end (blade up), and (iii) arm over the side (blade up). c) The operating cylinder is the boom cylinder.3.The weight of the excavator's bucket, hook, sling and other lifting accessories have been taken into consideration when calculating these maximum loads.
3859
3572
3572
3572
3572
3682
3660
3418
2767
1750
1620
1620
1620
1620
1670
1660
1550
1255
3782
3760
4145
4928
5579
5722
5391
4355
1715
1705
1880
2235
2530
2595
2445
1975
3760
2547
2106
1918
1841
1885
2051
2481
2900
1705
1155
955
870
835
855
930
1125
1315
3660
3760
4068
3495
3274
3164
3043
3065
1660
1705
1845
1585
1485
1435
1380
1390
3704
2448
2007
1819
1742
1841
1940
2437
2723
1680
1110
910
825
790
835
880
1105
1235
3704
3682
3462
3296
3010
2999
2933
2944
1680
1670
1570
1495
1365
1360
1330
1335
2414
2337
2216
2183
2084
1095
1060
1005
990
945
3704
3969
4278
4355
3969
1680
1800
1940
1975
1800
5204
7133
7706
7927
7332
5777
3782
2360
3235
3495
3595
3325
2620
1715
2536
2403
2370
2282
2139
1150
1090
1075
1035
970
5127
5325
4730
4818
4697
4785
3892
2325
2415
2145
2185
2130
2170
1765
5237
5060
4399
4520
4498
4586
3760
2375
2295
1995
2050
2040
2080
1705
101 International Parkway, Adairsville, GA 30103, U.S.A.TEL:770-877-7570 FAX:770-877-7572http://www.yanmar.com
Note : All information presented in this Brochure is subject to change without notice.
Printed in Japan
ViO75-AOutput: 58.2 hp (43.4 kW)Operating weight17640 lbs (8000 kg)(*Steel tracks)
000060E2771⑧ 0706 0312 N
• Blade• Boom swing function• Rubber or Steel tracks • Hydraulic quick coupler • Auxiliary valve and piping (arm end)• 2way control pattern change• Cylinder cover (boom, blade)
• Windshield washer• ROPS/FOPS Cabin• Defroster• Airconditioner• Joystick pilot controls• Arm rests• Suspension and reclining seat
• Seat belt• Traveling levers and pedals• Traveling alarm• Built-in type boom light• Exterior cabin work light• Operation manual
Hydraulic Quick Coupler Control
To enable the use of additional hydraulic attachments, PTO is piped to the end of the arm.
2-way pattern control lever, (ISO or OPTION).
The ease of overhead windshieldstorage helps reduce windshield damage.
One Person OperationAttachment changes are made easily from the operator's area. The locking pins assure safe operation.Many brands of pin-on attachments can still be used.Eliminates the need to replace existing attachments.
The arm was designed from the start to accommodate our new hydraulic quick-coupler,so that job performance will be significantly enhanced.The use of a conventional manual coupler is relatively time-consuming, and results in reduced productivity.With the Yanmar hydraulic quick-coupler, however,attachment changes can be greatly expedited.
The First Tailor-Made Hydraulic Quick-Couplerin the Industry - - It's all so Easy and Standard Equipment!
The Safety and Comfort of True Zero Tail SwingCommon Zero Tail models kept the overhang during turning to within just 10 percent of the crawler width. The Global ViO achieves the ultimate goal of no overhang at all. Since the counterweight and the front corners never extend beyond the machine width, there is no concern even on jobs right up against a wall. It's safe, easy and smooth.
The Stability of a Conventional style UnitThe wide spacing of the distinctive Yanmar offset tracks achieves a good grip on the ground and the high tensile strength steel plates keep the implement light. The outstanding balance is further enhanced by the newly developed large counterweight. The resulting stability is as great as that of a conventional style unit.
Up Against a Wall? No Problem
Angled crawler frame reduces unwanted build up of foreign matter.
Integrated boom-light isprotected from damage.
Large opening rear hoodfor easier maintenance.
Battery, fuel and hydraulic oil can be checked more conveniently.
Removable side frame cover for easier service accessibility.
Reclining and suspension seat with seat belt.
Joystick pilot controls and arm rests are convenient to use and reduce operator fatigue.
Air conditioner is standard equipped.
14.0 sq.ft. (1.3m2) 10.8 sq.ft. (1.0m2)
Cabin light for a bigger range of vision.
Wider entrance to the work station.
Space of the Cabin
ViO75 ViO70
1'8"(505mm)
3'1"(930mm)
1'9"(525mm)
3'2"(960mm)
increased fuel economy.
Multi - function operationto increase on - the - jobsproductivity.
Allclear!!
Backing is a breeze
Speedy
An Environmental Engine InsideClean exhaust and powerful output. The people-friendly Yanmar C&S (Clean and Silent) engines are approved under the emissions and the noise regulations of theEU (Europe) and the EPA (United States).
Dimensions Unit : ft-in (mm)
ViO75-A
A
14'7"(4450)
B
15'5"(4700)
C
13'1"(4000)
D
22'11"(6980)
E
20'7"(6280)
F
9'6"(2890)
G
23'11"(7300)
H
15'4"(4680)
I
7'10"(2390)
J
8'11"(2715)
ViO75-A
K
1'6"(460)
L
7'5"(2270)
M
1'6"(450)
N
1'3"(380)
O
7"(180)
P
2'6"(770)
Q
1'10"(550)
R
1"(30)
S
3'8"(1130)
Good visibilityleads less accident.
L
M
N
G
H
I
J Q
P
O
R S
K
CAB
D
E
F
Specifications
Hydraulic P.T.O.
ModelTypeOperating weight
Engine
Performance
Ground contact pressureHydraulic system
UndercarriageBlade dimensionsFuel tank capacity
Rubber trackSteel trackTypeModelOutputMax. digging force, bucket/armTraveling speedSwing speedBoom swing angle, (L/R)Rubber trackSteel trackPump capacity
Main relief set pressureTrack typeWidth x height
lbs (kg)lbs (kg)
hp (kW)/RPMlbs (kN)
MPH (km/h)RPM
degreesPSI (kPa)PSI (kPa)
GPM(L/min)
PSI (MPa)
ft-in (mm)Gals (L)
ViO75-ACabin
17530 (7950)17640 (8000)
Water-cooled 4 cyl., diesel4TNV98-XBV
58.2 (43.4) / 200011015/7284 (49.0 / 32.4)
2.9 / 1.7 (4.7 / 2.7)10
68 / 685.02 (34.6)5.06 (34.9)
18.6 x 2 + 15.2 + 3.3(70.3 x 2 + 57.4 + 12.4)
3553 (24.5)Rubber or steel
7'5"x1'6" (2260x450)26.4 (100)
ViO75-AModelOutput
Specifications
Combined flow,double actions
PSI(kPa)GPM (L/min)
1900 RPM 1150 RPM
20.5 (77.3)33.8 (127.7)2986 (20595)
YANMAR True Zero Tail Swing Excavator
YANMAR - YOUR BEST PARTNER FOR BUILDING THE FUTURE
h
r
W
P
(Please note that the standard equipment may vary from this list. Consult your Yanmar dealer for confirmation.)
STANDARD EQUIPMENT
LIFTING CAPACITY
ViO75-A
Excavator equipped with ROPS/FOPS cabin and rubber crawlers.r: Reach from swing center line : ft-in(mm)h: Lift point height : ft-in(mm)w: Lifting capacity : lbs(kg)P: Load point
: Rated over front
: Rated over side
1.The rated lifting capacities that are indicated below are based on ISO 10567 and do not exceed 87% of the excavator's hydraulic lifting capacity or 75% of its static tilt load (tipping load) capacity.2.The following operating criteria are also applicable to the calculation of these maximum loads; a) The “load point“ is the location of the front bolt on the arm. b) The three indicated machine positions are : (i) arm over the front end (blade down), (ii) arm over the front end (blade up), and (iii) arm over the side (blade up). c) The operating cylinder is the boom cylinder.3.The weight of the excavator's bucket, hook, sling and other lifting accessories have been taken into consideration when calculating these maximum loads.
3859
3572
3572
3572
3572
3682
3660
3418
2767
1750
1620
1620
1620
1620
1670
1660
1550
1255
3782
3760
4145
4928
5579
5722
5391
4355
1715
1705
1880
2235
2530
2595
2445
1975
3760
2547
2106
1918
1841
1885
2051
2481
2900
1705
1155
955
870
835
855
930
1125
1315
3660
3760
4068
3495
3274
3164
3043
3065
1660
1705
1845
1585
1485
1435
1380
1390
3704
2448
2007
1819
1742
1841
1940
2437
2723
1680
1110
910
825
790
835
880
1105
1235
3704
3682
3462
3296
3010
2999
2933
2944
1680
1670
1570
1495
1365
1360
1330
1335
2414
2337
2216
2183
2084
1095
1060
1005
990
945
3704
3969
4278
4355
3969
1680
1800
1940
1975
1800
5204
7133
7706
7927
7332
5777
3782
2360
3235
3495
3595
3325
2620
1715
2536
2403
2370
2282
2139
1150
1090
1075
1035
970
5127
5325
4730
4818
4697
4785
3892
2325
2415
2145
2185
2130
2170
1765
5237
5060
4399
4520
4498
4586
3760
2375
2295
1995
2050
2040
2080
1705
101 International Parkway, Adairsville, GA 30103, U.S.A.TEL:770-877-7570 FAX:770-877-7572http://www.yanmar.com
Note : All information presented in this Brochure is subject to change without notice.
Printed in Japan
ViO75-AOutput: 58.2 hp (43.4 kW)Operating weight17640 lbs (8000 kg)(*Steel tracks)
000060E2771⑧ 0706 0312 N
• Blade• Boom swing function• Rubber or Steel tracks • Hydraulic quick coupler • Auxiliary valve and piping (arm end)• 2way control pattern change• Cylinder cover (boom, blade)
• Windshield washer• ROPS/FOPS Cabin• Defroster• Airconditioner• Joystick pilot controls• Arm rests• Suspension and reclining seat
• Seat belt• Traveling levers and pedals• Traveling alarm• Built-in type boom light• Exterior cabin work light• Operation manual