58
Anx.22A - B. Sc. Physics(Aff. Coll) 2007-08 Page 1 of 58 BHARATHIAR UNIVERSITY, COIMBATORE REGULATIONS FOR B.Sc. PHYSICS DEGREE PHYSICS COURSE WITH COMPULSORY DIPLOMA (SEMESTER SYSTEM) 1. Eligibility for admission to the course Candidate for admission to the first year of the B.Sc. Physics (with Physics and Mathematics) degree course shall be required to have passed the higher secondary examination (Academic) conducted by the Govt. of Tamil Nadu other examinations accepted as equivalent there to by the syndicate, subject to such other conditions as may be prescribed therefore. 2. Duration of the course The course shall extend over a period of three years comprising of six semesters with two semesters in one academic year. There shall not be less than 90 working days for each semester. Examination shall be conducted at the end of every semester for the respective subjects. 3. Course of study The course of study for the UG degree course of Branch III Physics shall consist of the following a) Part – I Tamil or any one of the following modern / classical languages i.e., Telugu, Kannada, Malayalam, Hindi, Sanskrit, French, German, Arabic & Urdu The subject shall be offered during the first four semesters with one examination at the end of each semester. b) Part – II : English The subject shall be offered during the first four semesters with one examination at the end of each semester. During third semester part II English will be offered as communication skills. c) Foundation Course The foundation course shall be comprise of two stages as follows: Foundation Course A : General Awareness ( I & II semesters) Foundation Course B : Environmental and Studies (III & IV Semesters) 1. The syllabus and scheme of examination for the foundation course A. General awareness shall be appointed as follows. From the printed material supplied by the university - 75% Current affairs & Who is who? - 25% The current affairs cover current developments in all aspects of general knowledge which are not covered in the printed material on this subject issued by the university 2. The Foundation course B shall comprise of only one paper which shall have Environmental Studies d) Part – III Group A : Core subject – As prescribed in the scheme of examination Examination will be conducted in the core subjects at the end of every semester Annexure No. 22 A SCAA Dated 29.02.2008

LIFT TRUCK OPERATOR TRAINING PROGRAM · 2020-01-16 · 0-8 TON MOBILE CRANE OPERATOR INSTRUCTOR REFRESHER PROGRAM Aug-19 Safe-Tech Training Inc. 416-410-1855 Page 2 of 2 SAFE-TECH

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: LIFT TRUCK OPERATOR TRAINING PROGRAM · 2020-01-16 · 0-8 TON MOBILE CRANE OPERATOR INSTRUCTOR REFRESHER PROGRAM Aug-19 Safe-Tech Training Inc. 416-410-1855 Page 2 of 2 SAFE-TECH

0-8 TON MOBILE CRANE OPERATOR INSTRUCTOR REFRESHER PROGRAM

Aug-19 Safe-Tech Training Inc. 416-410-1855 www.safetechtraining.com Page 1 of 2

PROGRAM OVERVIEW

The Safe-Tech 0-8 Ton Mobile Crane Operator Instructor Refresher Program is designed to review the knowledge

requirements of a Mobile Crane trainer and to instruct participants on how to provide effective training and conduct

evaluations of your Mobile Crane operators. Training is specific to the equipment types used in your operation. This

program does not cover vehicle operation or traffic control for operators who work on public roadways.

PRE-REQUISITES

This program is suitable for personnel who have previously completed the Safe-Tech 0 – 8 Ton Mobile Crane Operator

Instructor Program. Participants must be competent on all mobile cranes and attachments that they will be required to

instruct on and be effective communicators with strong verbal and directional skills.

COMPLIANCE

Safe-Tech programs meet or exceed all relevant CSA Standards, applicable Federal/Provincial regulations and Ministry

of Labour Guidelines.

PROGRAM INCLUDES

▪ Written examination

▪ Practical operating instruction and testing

▪ Record of training report

▪ Individual wallet certificates (for course participants)

▪ Upon completion of the course the following information will be electronically transferred to the booking contact:

Power Point Presentation, Written Exam, Answer Key, Safety Rules, Progress Evaluation (Practical Training

form), Practical Operator Test, Pre-Shift Inspection Form, Wallet Certificate Template.

TRAINING CONTENT

▪ Current applicable legislation and guidelines

▪ Hazard awareness

▪ Basic equipment and design principles

▪ Pre-shift equipment inspections

▪ Types of hardware

▪ Safe hoisting/operating techniques

▪ Hand signals for slingers and operators

▪ Occurrence/damages causes

▪ Capacity ratings/load weight calculations

▪ Internal responsibility

▪ Turning and flipping loads

▪ Equipment applications/basic rigging

▪ Hitches and angles

▪ Pedestrian/operator safety

▪ Outrigger blocking & cribbing

▪ Underfoot conditions

▪ Power line safety awareness

LANGUAGE COMPREHENSION

Safe-Tech programs are conducted in English and best suited for participants with good English comprehension. Please

advise our office at the time of booking and prior to the start of the course of any comprehension concerns or if you will

be providing a translator when warranted. The instructors will do their best to accommodate, however Safe-Tech cannot

be held responsible for any situation where comprehension was a factor due to a language barrier or impediment.

DURATION & LOCATION

One day program on-site includes both in-class and practical components.

Page 2: LIFT TRUCK OPERATOR TRAINING PROGRAM · 2020-01-16 · 0-8 TON MOBILE CRANE OPERATOR INSTRUCTOR REFRESHER PROGRAM Aug-19 Safe-Tech Training Inc. 416-410-1855 Page 2 of 2 SAFE-TECH

0-8 TON MOBILE CRANE OPERATOR INSTRUCTOR REFRESHER PROGRAM

Aug-19 Safe-Tech Training Inc. 416-410-1855 www.safetechtraining.com Page 2 of 2

SAFE-TECH ADVANTAGES

Safe-Tech is the Working at Height and Equipment Training Partner of Workplace Safety & Prevention Services

and many of our programs are MOE Director approved.

▪ Safe-Tech programs meet or exceed all pertinent standards and regulations.

▪ On-Site programs are offered on any shift, 24/7, without shift premiums.

▪ Our unique training techniques incorporate exclusive custom models and visual aids which enhance interest and

facilitate higher comprehension & retention levels for all participants.

▪ Supervisors, managers, J.H.S.C. members who do not use or operate equipment but are responsible for

implementing or enforcing safety policies may attend our programs at no charge (some exceptions apply).

▪ Our internal data management and tracking system automatically notifies clients at least 30 days before

personnel are due for applicable recertification.

▪ Safe-Tech is the first and only training company in the industry to offer a satisfaction guarantee. “If

the content or presentation of any Safe-Tech program is not to your complete satisfaction, there will be

no charge”.

Safety Training Specialists since 1989