LIFT CONTROL SYSTEMS CATALOGUE 2009 - ALBEN EN... · LIFT CONTROL SYSTEMS CATALOGUE 2009 All Your Needs For Elevators

LIFT CONTROL SYSTEMS

CATALOGUE 2009

All Your Needs For Elevators

ALBEN İnşaat Makine Elektrik Elektronik San. ve Tic. Ltd. Şti 2/21 Tavukçuyolu Cad. No:150/4 Yukarı Dudullu 34775 İstanbul – TÜRKİYE Tel: +90 216 526 39 70-71 Fax: +90 216 526 39 72 www.alben.com.tr

INDEX

1. Lift Control Cards ................................................................................................................... 3

2. Speed Control Units .............................................................................................................. 7

3. Emergency Rescue Cards .................................................................................................... 8

4. Lift Control Panels ............................................................................................................... 10

5. Photocells ............................................................................................................................ 12

6. Graphic LCD Displays ......................................................................................................... 13

7. Door Control Cards .............................................................................................................. 14

8. Inspection & Alarm Sets ...................................................................................................... 16

9. Magnetic Shelters ................................................................................................................ 18

10. Other Products .................................................................................................................... 19


ARL-500 Functional Programmable Lift Control Card

• All system parameters can be adjusted by using 6 buttons and an LCD placed on the card;

• Can be used with any command type up to 48 floors;

• Can be used at one speed, two speed, speed controlled and hydraulic lifts without any

extra parts. System can be selected from the menu;

• Can be used in group operation up to 8 elevators;

• All panels in the group are same and no extra panel is needed;

• Serial communication and pre-wired installation with car and landing modules via CAN

BUS;

• Floor detection is carried out by counter or encoder system. When an encoder is used,

braking and stopping adjustment can be made by using the buttons on the card or the

buttons on the car panel;

• Can be used in high speed elevators;

• Saving errors on system (last 256 records) with date and time information enables to track

past errors in detail;

• Automatic door control according to the stops is achieved by double automatic door

support;

• Side selective door operation individually determined for each stop;

• RS-232, RS-485 and 2 CAN BUS serial ports;

• Monitoring the lift status, giving commands, making adjustments and following errors are

possible by a connection to a local computer via RS-232 or to a remote computer using a

modem;

• Free programmable inputs and outputs on main controller, car controller and landing

modules for special purposes;

• Integrated door bridging safety relays for door pre-opening and re-leveling;

• Integrated motor phase protection relay;

• Hand held terminal for operating the controller from any point of CAN BUS;

• Designed according to European Lift Standard EN-81.

LIFT CONTROL

CARDS


ARL-300 Functional Programmable Lift Control Card



• Can be used at one speed, two speed, speed controlled and hydraulic lifts without any

extra parts. System can be selected from the menu;

• Can be used in group operation up to 4 elevators. All panels in the group are same and no

extra panel is needed;

• Only two cables are needed for group communication;

• Easily installed and safe detected shaft information gathering system;

• An error code with its explanation is displayed on the LCD at an abnormal condition. (Ex.

H1:Door can not locked);

• At normal condition the lift can be monitored by messages on the LCD. (Waits for calls,

high speed, low speed, inspection);

• Each floor can be named by an alphanumeric character (L, P, E, F, H, b, o, 0, 1, 2, 3…..);

• 7-segment and signalization outputs are short-circuiting protected. In a short circuit case

the concerned output is shut down until problem is removed and a message stating which

output is short-circuited is displayed on the LCD. (D segment short-circuited);

• Only 15 cables are enough for system to work by using serial car connection (FX_SERI)

which reduces labor and cable costs;

• Emergency rescue by 2 pieces of 12V batteries. ARL-SARJ Charge Card controls and

charges the battery if necessary;

• Connection cards, which are used instead of panel terminals, are supplied with flexible

parallel connection cables thereby saving extra connection terminals on control panel; • Integrated door bridging safety relays for door pre-opening and re-leveling;

• Integrated motor-phase protection relay;

• Integrated automatic door control inputs and outputs;

• Binary or grey code outputs for LCDs and Dot Matrix Displays;


LIFT CONTROL

CARDS


ARL-200S Functional Programmable Lift Control Card



• Can be used at one speed, two speed and speed controlled lifts without any extra parts.

System can be selected from the menu;

• Can be used in group operation up to 2 elevators. All panels in the group are same and no

extra panel is needed;

• Only two cables are needed for group communication;

• Floor detection is carried out by counter system. Only 3 magnetic switches for one speed

and 4 for two speed systems including limit switches are used for any number of floors;

• An error code with its explanation is displayed on the LCD in case of an abnormal

condition (e.g.. H1:Door can not be locked);

• At normal condition the lift can be monitored by messages on the LCD (Waits for calls,

high speed, low speed, inspection);

• Each floor can be labeled by an alphanumeric character (L, P, E, F, H, b, o, 0, 1, 2, 3...);

• 7 Segment and signalization outputs are short-circuiting protected. In case of a short

circuit, the related output is shut down until problem is removed and a message stating

which output is in short-circuit is displayed on LCD (D segment short circuit);

• Only 15 cables are enough for system to work by using serial car connection (FX_SERI)

which reduces labor and cable costs;

• No extra switch is needed at high speed lifts (1.6 m/sec) for early slow down;


LIFT CONTROL

CARDS


ARL-100 Control Card For Simple Systems

• All system parameters can be adjusted by using 3 buttons and a 7-segment display placed

on the card;

• Can be used with simple push button command type up to 8 floors;

• Can be used at one speed and two speed lifts without any extra parts. System can be

selected from the menu;

• Floor detection is carried out by counter system. Only 3 magnetic switches for one speed

and 4 for two speed systems including limit switches are used for any number of floors;

• The current floor is displayed on the 7-segment display during normal operation. An error

code with its explanation is displayed in case of an abnormal condition;

• Contains signal inputs for fire, earthquake, overload, full load, car priority switch; and

outputs for direction arrows, car illumination, busy, out of service, and automatic door card;

• All digital and signalization outputs are short-circuiting protected;

• System consists of only one unit (22 cm x 11 cm);

• Economical and practical solution for simple systems;


LIFT CONTROL

CARDS


ADrive VVVF Inverter

• Can be used with open or closed loop systems;

• High dynamic performance;

• Contributes to energy-saving;

• Eliminates startup problems with generators by the help of controlled motor current;

• Thanks to Space Vector Modulation for high torque motor drive at all speeds;

• Exclusively designed for elevators. Special parameters for traveling comfort;

• Compatible with 5V - 24V, TTL, HTL, pnp output, npn output and totem pole output

encoder types;

• 10 KHz IPM switching frequency for low noise motor drive;

• Integrated DC REACTOR (DCR);

• 4 low noise fans for efficient cooling;

• All control inputs and outputs are isolated;

• User friendly LCD menus for all parameters and faults;

• PC communication with RS-232 port;

• Control card communication with RS-485 port;

• DATA KEY for easy saving and transferring parameters;

• Overload, high voltage, low voltage, short circuit, power interruption, line phase control,

over-heat, grounding fault, over-torque and other necessary protection functions;

• 7.5kW, 11kW, 15kW and 20kW models are available.

SPEED CONTROL

UNITS


AKUS-SD Combi Emergency Rescue Card

• In case of a mains failure, the lift stopped between two floors is moved to floor level, the

automatic door is opened and passengers are evacuated safely;

• For lifts with automatic door, in case of a mains failure at floor level, the door is opened

and passengers are evacuated;

• Can be installed in all one speed, two speed or speed-controlled systems;

• Powered by 5 batteries which need no maintenance;

• Thanks to Smart Battery Charge System which helps batteries to work for many years;

• With LCD program, parameters (max travel time, automatic door type, motor drive

frequency, door opening time, starting delay, language, etc.) can be adjusted easily;

• Errors and system data are displayed on LCD;

• Can work open loop. without connecting a sensor to the motor;

• The AKUS-SD unit is integrated with control panel. All the connections necessary for

emergency unit are done in factory. So the setup time is minimized.

EMERGENCY RESCUE CARDS


AKUS Emergency Rescue Card






• Can be installed in any system regardless of the brand and type of control panel;

• In case the lift, stopped between two floors due to a control panel failure, can be moved to

floor level by using a rescue button placed on the car panel;



• The battery voltage and error codes are indicated by the display placed on the card;

• Can work open loop. without connecting a sensor to the motor;

• Power given to the motor is adjusted automatically, no manual adjustments are needed.

EMERGENCY RESCUE CARDS


ARL-200S Lift Control Panels

• Driving Type:

o One Speed;

o Two Speed;

o Speed Controlled;

ACVV;

VVVF;

• Open Loop;

• Closed Loop;

o Hydraulic.

• Command Type:

o Simple Push Button;

o Up or Down Collective;

o Selective Collective;

o Group Operation.

• Car and Shaft System:

o Car Serial & Floors Parallel;

o Car Parallel & Floors Parallel;

• Emergency Rescue System:

o Integrated into Control Panel;

o External;

• Automatic Door:

o Semi Automatic;

o Semi Automatic with Cabin Door;

o Full Automatic.

LIFT CONTROL PANELS


AP-AKUS Emergency Rescue Panels






• Can be installed in any system regardless of the brand and type of control panel;

• In case the lift, stopped between two floors due to a control panel failure, can be moved to

floor level by using a rescue button placed on the car panel;



• The battery voltage and error codes are indicated by the display placed on the card;

• Works open loop. No need to put a sensor on the motor;

• Power applied to the motor is adjusted automatically, no manual adjustments needed.

LIFT CONTROL PANELS


FSL1N One Beam Photocell

• 1 infrared sensor;

• Composed of faced sensors;

• Has NO/NC relay contact output.

FSL2N Two Beam Photocell

• 2 infrared sensors;

• Composed of faced sensors;

• Has NO/NC relay contact output.

PHOTOCELLS PHOTOCELLS


LCD240X128A Graphic LCD Display

• Supports up to 32 floors;

• 240 x 128 pixels resolution (114 x 70 mm active area);

• General purpose displaying panel for car and landings;

• Support for CANBus, gray, binary code input, Arkel counter and 7-segment modes;

• Programmed by buttons on board or with a PC by using LCD240128A Uploader software;

• Individual picture programming for each floor;

• Programmable static / animated arrow;

• Programmable static / animated subtitle;

• Programmable ‘out of service’ and ‘overload’ images;

• Programmable logo;

• Selectable letters or numbers (-, 0…9, A…Z) for floor text;

• Saving or loading personal settings with the uploader;

• User pictures and logos can easily be added to system by PC software;

• Positive or negative common selectable;

• Time and date display (only in CANBus mode).

GRAPHIC LCD DISPLAYS


KM_20 Door Control Card (Telescopic Doors with 24VDC Motors)

• KM_20 provides complete hold of the motor with its 4 region motor control and high

resolution encoder input hardware;

• In addition to this hardware, it allows swift but comfortable motion of doors with its software

that provides S softening in travel ramps and which has the algorithm that does not require

limit switches;

• In order to work with the control panels in complete harmony it can generate “Doors are

completely open”, “Doors are fully closed” and “Obstruction detected” signals. These

signals enable it to work for fire lift doors;

• It provides many functions and parameters for manufacturing companies that enable

application flexibility, like motor reduction ratio, motor revolution, motor sheave

circumference and skate open zone;

• It provides features for auto-learning of door travel limits (without limit switches);

• A nudging function is included with buzzer sound and slow speed closing after a long time

photocell interrupt;

• In case of mains failure, it can get the power from 2 pcs 12V batteries and can make floor

controlled door opening. Km_20 controls the battery charge;

• All system parameters can be adjusted easily by user via buttons and LCD on the board;

• The door position data and the door commands will be monitored during normal operation

and the error message will be monitored during abnormal condition;

• Availability of multiple languages: Turkish and English.

DOOR CONTROL

CARDS


KM_GOLD55 Door Control Card (Folding Doors)

• Workability with 24VDC satellite dish motors and reader disc with holes between 20 and

40;

• By encoder, travel curve of the door can be handled sensitively;

• Door travel speed, obstruction and braking parameters can easily be adjusted with

trimpots;

• In case of mains failure, it can get the power from a battery. Km_Gold55 controls the

battery charge;

• With 48V-220V ac/dc and single signal workability (with retiring cam circuit);

• System parameters and error messages will be monitored via two-digit 7-segment display;

• Adjustable 12V or 24V battery supply voltage (selectable via jumper);

• The encoder supply voltage is either 5V or 24V (selectable via jumper);

• Ability to observe the operation of limit switches via status LEDs;

• Sound alert and reopening in case of a physical obstacle.

DOOR CONTROL

CARDS


RK12 Standard Inspection Box (Battery Charge + Alarm + Gong)

• Compatible with systems with parallel car installation up to 16 stops;

• Emergency lightening lamp output at mains failure;

• Alarm;

• Gong;

• 12V battery and battery charge;

• 2 pieces of plugs;

• Lightening;

• Special connection for safety circuit by KBK-6 card support;

• Convenience of controlling from any point on the car by EK-1 hand terminal;

• Wide space for comfortable working.

RK22 Standard Inspection Box (FX_SERI + Battery Charge + Alarm + Gong)

• Serial car installation support up to 16 stops

• Includes all the features of RK12 Standard Inspection Box

• Includes FX_SERI Serial Car Connection Card

• Enables to save from costs by requiring less materials for car buttons, digital, overload, full

load, gong, direction arrows, car lamp, automatic door open & close buttons and inspection

movement buttons

• Special connection for safety circuit by KBK-6 card support

• Convenience of controlling from any point on the car by EK-1 hand terminal

• Wide space for comfortable working

INSPECTION & ALARM

SETS

INSPECTION & ALARM

SETS


RK32 Standard Inspection Box (FX_SERI-32 + Battery Charge + Alarm + Gong)

• Car installation support for ARL-300 control panels more than 16 stops;

• Includes all the features of RK12 Standard Inspection Box;

• Includes FX_SERI-32 Serial Car Connection Card;

• Enables to save from costs by requiring less materials for car buttons, digital, overload, full

load, gong, direction arrows, car lamp, automatic door open & close buttons and inspection

movement buttons;

• Special connection for safety circuit by KBK-6 card support;

• Convenience of controlling from any point on the car by EK-1 hand terminal;

• Wide space for comfortable working.

EK-1 Manual Controller

• Manual control from control panel;

• Inspection switch;

• Inspection movement buttons;

• Emergency stop (can be locked).

INSPECTION &

ALARM SETS

INSPECTION & ALARM

SETS


MTM Mono-Stable Magnetic Shelter

General Features:

• Electronic circuit design;

• Long life due to working without contacts;

• Durable against vibrations;

• Visual inspection of operation by LEDs on board;

• Can be used in elevators where quick sensing is required;

• Can be used for door opening security zone;

• Can work independently from magnet pole;

• Easily installed by plastic legs.

Technical Features:

• Can work for 30 mm distance;

• 2 mili seconds response time

• Can work either with DC or AC input between 20V and 28V;

• 24 VDC / 100 mA; short circuiting and overload protected signal output;

• 95 x 18 mm dimensions;

• 1.5 m of cable length

Compatibility:

• EN81-1 and EN81-2;

• IEC 60068-2-6: Sinusoidal Vibration Test;

• IEC 60068-2-27: Mechanical Impact Vibration Test;

• IEC 60068-2-29: Crash Test;

MAGNETIC SHELTERS


FX_SERI Serial Car Connection Card

• Communicates with ARL-200S and ARL-300 control cards via two cables;

• No installation is needed between the car and control panel for car buttons, display,

overload, full load, gong, direction arrows, car lamp, automatic door close & open buttons

and inspection movement buttons. Only security, power and communication connections

are needed and 15 cables are enough for connection between car and control panel.

AUTO_KG Automatic Door Card

• Used with ARL-200S and ARL-100 control card;

• Can work with all three phase, single phase and electronic-controlled doors;

• Has light barrier input, door close input and door limit contact inputs;

• By using two potentiometers, the duration of light barrier's braking and door-open waiting

at the floor can be adjusted.

OTHER PRODUCTS


REV1 Inspection Box Card

• Works with 24V supply voltage;

• 12V battery charge and emergency light outputs;

• Gong output, Alarm output.

MKR-02C Motor Phase Protection Card

• Phase turn control, Adjustable phase voltage control, PTC control;

• 48V DC leakage current control, Warning LEDs.

KUDS Cartop Display Driver

• Drives the display in car panel according to the signals from magnetic switches;

• Reduces cable and labor costs.

OTHER PRODUCTS


GKS Grey Code Driver

• Converts counter system data to Binary or Grey code.

GEVEZE Voice Announcement System

• ChatterBox is a floor announcement system designed for elevators. It notifies the name or

the number of the current floor with a human voice. It also gives “overload” and “out of

service” warnings;

• Grey code, binary code and counter modes are available as input modes;

• ChatterBox board comes loaded with default messages from the factory. But it can also be

customized with the help of a personal computer and the ChatterBox Loader Software.

LEVELED Floor Level Indicator

• Floor level indicator

• Buzzer for sound alert after car reaches the floor level in case main power fails

• Can be used with hydraulic and rope lifts

• Counter type selection via jumper

• External lamp output (12V/1W) which can be used to display levelled signal in a different

place

• Can be supplied with 12V or 24V battery voltage

OTHER PRODUCTS

OTHER PRODUCTS

OTHER PRODUCTS

Documents

LIFT CONTROL SYSTEMS CATALOGUE 2009 - ALBEN EN... · LIFT CONTROL SYSTEMS CATALOGUE 2009 All Your Needs For Elevators