Flip Over Saw LF1000 STANDARD EQUIPMENT: TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag, wrench. Blade diameter 260mm Bore size 30mm Depth of cut @ 90° 70mm Depth of cut @ 450° 48mm No load speed 2700rpm Input 1650w Net weight 36kg • Soft start • Electronic brake • Constant speed under load • Table size 500 x 560mm • Aluminum cast base Table Saw 2704 STANDARD EQUIPMENT: TCT blade, rip fence, push stick, bevel guide rule, 22mm wrench, 19mm offset wrench. TCT blade diameter 260mm Bore diameter 30mm Size W L Main table 625mm 567mm With sub table 1050mm 1060mm No load speed 4,800rpm Input 1650w Net weight 34.9kg CODE PRICE ex. VAT PRICE inc VAT 2704 £970.00 £1,164.00 2704X + Stand 194093-8 £1,146.00 £1,375.20 CODE PRICE ex. VAT PRICE inc VAT LF1000 £1,027.00 £1,232.40 LIGHTWEIGHT MOTOR FOR EASY CONVERSION FROM MITRE TO TABLE SAW Switch with electronic soft start and anti restart function Easy to read scale. Possible to adjust zero point Telescoping guide rail on which rip fence slides Rip fence slides smoothly and always stays parallel. 3/8 x 3/4” T-formed groove accepts common accessories Table size with sub-table right and back (included). Length 665 to 1045mm Width 753 to 1066mm The centre of the swing arc of the saw blade is located at the surface of the table so that the cutting line is always at the same position at any angle. • High rigidity delivers accurate cutting • Telescopic guide rail on which the rip fence slides along. • Capacity to rip 8ft x 4ft sheet • Electronic soft start and anti-restart. • Electronic brake. • Powerful 1,650 watt motor. Capacity as a table saw 90° 70mm 45° 48mm Capacity as a mitre saw Mitre angle Bevel angle 90° 45°(left) 90° 20 x 210mm 50 x 150mm or 68 x 155mm 45° Left/right 68 x 95mm Cutting angle Depth 90° 93mm 45° 64mm Angle settings -0.5° to 45.5° 194093-8 Table Saws 73

LF1000Flip Over Saw - fileLF1000Flip Over Saw STANDARD EQUIPMENT: TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag, wrench. Blade diameter 260mm

Download PDF Report

Upload
truongtuyen
View
223
Download
3

Embed Size (px)

Citation preview

Page 1: LF1000Flip Over Saw - fileLF1000Flip Over Saw STANDARD EQUIPMENT: TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag, wrench. Blade diameter 260mm

Flip Over Saw LF1000

STANDARD EQUIPMENT: TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag, wrench.

Blade diameter 260mmBore size 30mmDepth of cut @ 90° 70mmDepth of cut @ 450° 48mmNo load speed 2700rpmInput 1650wNet weight 36kg

• Soft start• Electronic brake• Constant speed under load• Table size 500 x 560mm• Aluminum cast base

Table Saw 2704

STANDARD EQUIPMENT: TCT blade, rip fence, push stick, bevel guide rule, 22mm wrench, 19mm offset wrench.

TCT blade diameter 260mmBore diameter 30mmSize W L Main table 625mm 567mm With sub table 1050mm 1060mmNo load speed 4,800rpmInput 1650wNet weight 34.9kg

CODE PRICE ex. VAT PRICE inc VAT 2704 £970.00 £1,164.00 2704X + Stand 194093-8 £1,146.00 £1,375.20

CODE PRICE ex. VAT PRICE inc VAT LF1000 £1,027.00 £1,232.40

LIGHTWEIGHT MOTOR FOR EASY CONVERSION FROM MITRE TO TABLE SAW

Switch with electronic soft start and anti restart function

Easy to read scale. Possible to adjust

zero point

Telescoping guide rail on which rip fence slides

Rip fence slides smoothly and always stays

parallel.

3/8 x 3/4” T-formed grooveaccepts common

accessories

Table size with sub-table right and back (included).

Length 665 to 1045mmWidth 753 to 1066mm

The centre of the swing arc of the saw blade is

located at the surface of the table so that the cutting line is always at the same

position at any angle.

• High rigidity delivers accurate cutting• Telescopic guide rail on which the rip fence slides along.• Capacity to rip 8ft x 4ft sheet• Electronic soft start and anti-restart.• Electronic brake.• Powerful 1,650 watt motor.

Capacity as a table saw90° 70mm45° 48mm

Capacity as a mitre sawMitre angle Bevel angle 90° 45°(left)90° 20 x 210mm 50 x 150mm or 68 x 155mm45° Left/right 68 x 95mm

Cutting angle Depth 90° 93mm45° 64mmAngle settings -0.5° to 45.5°

194093-8

Table Saws