70-236, Lesson 4

Configuring a New Exchange Server

Practice Quiz

Fill in the Blank1. You would use the _________________ -StorageGroup ‘Server01\SG3’ –name ‘PublicDB’ –EdbFilePath G:\PUBLIC\PUBLIC.EDB to create a new public database called PublicDB for the SG3 storage group and which is stored in the G:\PUBLIC.\PUBLIC.EDB file.

Answer: New-PublicFolderDatabaseSection Ref: Creating Additional Storage Groups and Databases

2. Outlook Anywhere uses the ___________________ component.

Answer: RPC over HTTPSection Ref: Enabling Email Protocols

3. Email attachments formats follow the _________________ standard.

Answer: Multipurpose Internet MailSection Ref: Configuring OWA Options

4. The ________ connector is used to determine how email is sent to other servers within the organization and on the Internet.

Answer: sendSection Ref: Understand Connectors

5. The standard edition of Exchange Server 2007 allows you to create up to ____ databases per server.

Answer: 5Section Ref: Understanding Storage Groups and Databases

6. You can set the mailbox size limits using the Limits tab of ______________ properties.

Answer: databaseSection Ref: Setting Storage Limits on a New Database

7. Before you can use an Edge role server that can relay email, you must _________ to a hub server in the same AD site.

Answer: subscribeSection Ref: Configuring Receive Connectors

8. Each Hub role server can be configured with a ________________ email address that users can email if problems arise with email relay.

Answer: postmasterSection Ref: Configuring a Postmaster

Short Answer1. What command would you use to set the OWA Virtual directory?

Answer: Set-OWAVirtualDirectorySection Ref: Configuring OWA Options

2. Which authentication does the Exchange Server authentication use?

Answer: KerberosSection Ref: Configuring Existing Receive Connectors

3. What command would you use to create a Send Connector?

Answer: New-SendConnectorSection Ref: Creating Send Connectors

4. How do you enable POP3 on the CAS role server?

Answer: You need to start the POP3 service using the Services console.Section Ref: Enabling Email Protocols