Upload
ledat
View
219
Download
2
Embed Size (px)
Citation preview
LED push-button: momentary & alternate switches and indicators
Catalog
AircrAft SyStemS
ZODIAC AERO ELECTRIC (ZEL)
ActuAtion force: the force which must be applied to the cap to move it from the free position to the operating position.
ActuAtion trAvel: distance between the unlatched cap height and the position of the cap.
cAp extrAction force: the force needed to remove the cap assembly.
mounting Sleeve: receptacle for proper installation of the LED push-button on the front panel.
connector: electrical connection interface.
pAnel SpAcer: allows the position of the switch to move in relation to the panel.
Glossary
catalogOur
B
D
c
a All characteristics 4 - 8
Customization procedure 9 - 13
Select the body (base) 11
Customize the head (cap) 12
Accessories 14 - 18
Installation procedure 19 - 21
General terms of sales 22 - 23
StEP 1
StEP 2
This catalog introduces Zodiac Aero Electric (ZEL), part of Zodiac Aerospace group, LED push-buttons. They are designed and manufactured to meet the specifications of modern cockpits.
Your LED push-button configuration can be designed through the use of this catalog. For specific product request, Zodiac Aero Electric (ZEL) remains at your disposal to study new configurations for your application.
www.zodiacaerospace.com
2 ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators
Zodiac Aero electric (Zel) designs, develops, produces and supports cockpit systems, equipment and components for commercial aircraft, regional aircraft, business jet and helicopter manufacturers.
Our product capabilities:H Cockpit componentsH Landing gear control leverH Nose wheel steering unitH Integrated control panelH Overhead panel
Zodiac Aero Electric (ZEL) has proven experiences with Airbus, Boeing, Bombardier, Embraer, Gulfstream, Dassault and Airbus Helicopters.
ZoDiac aERo ElEctRic (ZEl)
We have three different switch configurations.
H indicator: illumination of message without switch actionH Momentary: switch product with actuation only while holding button.Switch will return to unactuated position H alternate: switch product with actuation maintained until pressed again. Switch will change physical position
ZEL LED lighted indicators and switches are designed for mounting panels of 1.2 mm (= 0.047 inch) to 8 mm (= 0.315 inch) thick.
Zodiac Aero Electric (ZEL) integrates its own components into control panels. Zodiac Aero Electric (ZEL) is a long time supplier of choice for cockpit components high quality product.
our PuSh-Button Switch oPtionS
3ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators
Zodiac Services is our organization dedicated to serve the aftermarket: airline, MRo, operator or Distributor
www.services.zodiacaerospace.com
ZoDiac ServiceS
FoR all oRDERS
uE phone: +33 1 55 82 53 96 - uS phone: #425-897.4327email: [email protected]
4 ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators
aallchaRactERiSticS
In this chapter, you will find all technical information useful for the creation of the push-button
Product characteristics 5Composition of push-button: body (base) & head (cap) 5
1. The body (base) 52. The head (cap) 5
General characteristics 6Materials characteristics 6Mechanicals characteristics 6Environmental characteristics 6
Electrical characteristics 7The flexible printed circuit 7The dimming 7
Optical characteristics 8Chromaticity diagram - CIE 1931 8Contrast 8Luminance 8
5ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators
the body is composed of:
H 4 Micro switches for alternate and momentary action H a shaft to assure the link between the head and the bodyH a locking system for alternate action
1 - ThE bOdy (bAsE):
composition of PuSh-Button: body (base) & head (cap)
Zodiac aero Electric (ZEl) lED push-button switch has a removable head, which remains attached to the body through a flexible printed circuit. the head is composed of:
H on the back side, lEDs are integrated on a flexible printed circuit
locking of the head is done by a clip permitting to support shocks, vibrations and head extractions.
2 - ThE hEAd (CAP):
these indicators are composed of two parts
PrODuCT chaRactERiSticS
ZOdIAC AERO ELECTRIC (ZEL) LEd swITCh AdvAnTAGEs H 3 types of lEDs switch
(indicator, momentary, alternate)
H sealed or unsealed version
H short lenght
H light weight
H Customizable head
H a various range of accessories
H Easy mounting
LEd ILLUMInATIOn AdvAnTAGEsH increased lifetime
H reduced current drawing
H resistance to shock and vibration
H reduced face temperature and power consumption
H reduced weight
H lower maintenance costs
all chaRactERiSticS
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators6
GENErAL chaRactERiSticS
our switches are composed of metal parts protected against natural and galvanic corrosion. the thermoplastic materials are PPss filled with high temperature fibre glass, self-extinguishing and nonflammable (category ul9uB.0).
H base body: aluminium alloy aiMgsi t6 hardness 65 to 85 hV
H switch contacts: gold-plated silver
teSt deScription levelS
Switch actuation force 9 to 18 N
total travel 3.2 +/- 0.2 mm
cap shell extraction force >100 N
Weight* indicators <17 g
Weight* momentary / alternate <25 g
Survival temperatures -55°C
limit operation temperatures-40°C
+70°C
normal operating temperatures-15°C
+50°C
Altitude 50,000 feet
Salt spray rTCAD0160, Section 14, Category S
Sand and dust rTCAD0160, Section 12, Category D
fungus growth rTCAD0160, Section 13, Category F
resistance to solvents rTCAD0160, Section 11, Category F
Shocks rTCAD0160, Section 7, Category E
vibration rTCAD0160, Section 8, Category H, Curve
the push-button switches are tested in accordance to the requirements of:
* Comparison between two 4PDT momentary non-sealed switches without connector, sleeve, or spacer
MEchanicalS characteristics:
EnviRonMEntal characteristics:
MatERialS characteristics:
PRoDuct conFiguRation
the flexible printed circuit is the master part of the lEDs lighted indicator. it links mechanically and electrically the head and the body. it performs the following functions:
H lighting through lEDsH Keeping body with head together when this one is offH supporting electrically and mechanically the lEDs and components togetherH wiring connections
the thickness of this flexible printed circuit has been determined to be as flexible as possible to make 150,000 cycles for mechanical endurance and enough rigidity for face traction.
the FlExiBlE PRintED ciRcuit:
circuit high level (28 vdc) loW level (5 vdc to 28 vdc)
Switching endurance 40,000 cycles 100,000 cycles 150,000 cycles
contacts shall accept a current between 1 mA and 100 mA under low voltage.
resistive (L/r ≤0.1 ms) 5 A per pole 3 ATo keep low-level characteristics switch contacts shall accept a current between 1 mA and 100 mA under low voltage.
Inductive (L/r ≤5 ms cos=0.8) 3 A 1.5 A
Lamp (peak level: 10 to 15 ln) 1 A 1 A
SEalED vERSion: Zodiac Aero Electric (ZEL) LED push-button is protected against dust and fluids.
contact RatingS
Information | Sealed version & switch tests
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 7
the lED PB switch lighting can be controlled either by a continuous 28VDC power supply or by 28VDC PwM source. the current consumption is <50 ma.
1) 28vdc power supply mode
H the use of a continuous 28VDC on pins 9 and 4 (pin 4 only for monocase) allows a Bright mode lighting
H the use of a continuous 28VDC on pins 8 and 5 (pin 8 only for monocase) allows a DiM mode lighting
2) 28vdc pWm control mode
the use of a 28 VDC PwM source on pins 9 and 4 (pin 4 only for monocase) allows a full dimage of the lighting by varying the PwM duty cycle. the variation law between the luminance and the duty cycle is linear.
the DiMMing:
Full DiSPlaY (MonocaSE)
SPlit DiSPlaY (BicaSE)
ELECTrICAL chaRactERiSticS
all chaRactERiSticS
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators8
chromaticity diagram - ciE 1931:
lenses with sunlight readability are identified by contrast values between legend and background. these values are measured perpendicularly to the viewing surface of the indicators or switches, exposed at an angle of 45° +/- 2° to 10,000 foot candles lighting (107 000 lux).
Sunlight readable legendsAlways visible white legends
colorS cAll cet cet
Blue >0.6
<0.1
>1
ReD >0.4 >1.1
AMBeR >0.8 >1.1
WHITe >0.7 >1.1
GReen >0.6 >1.1
x y x y x y x y x y
0.57 0.43 0.12 0.25 0.25 0.74 0.71 0.29 0.28 0.37
0.56 0.42 0.12 0.15 0.25 0.63 0.70 0.28 0.28 0.29
0.60 0.38 0.18 0.15 0.37 0.63 0.67 0.31 0.31 0.29
0.61 0.39 0.18 0.25 0.68 0.32 0.37 0.35
AMBeR Blue GReen ReD WHITe
the display legends are available in five standard colors. you will find the chromacity limits on the typical 1931 CiE Chromaticity coordinate.
contRaSt:
luMinancE:
OPTICAL chaRactERiSticS
average minimum luminance values in Candela per square metre (Cd/m2) and foot-lambert (fl) for indicators or switches with 8 leds
vERSion Sunlight REaDaBlE Mil noRM: S(1B)
vERSion alwaYS viSiBlE whitE Mil noRM: n(2g2)
vERSion coloRED BackgRounD Mil noRM: c(2B)
bRIGhT dIM bRIGhT dIM bRIGhT dIM
colorS meASurement min. max. min. max. min. max. min. max. min. max. min. max.
GReenCd/m2 600 1100 45 90 200 350 10 30
fL 175 321 13 26 58 102 3 9
BlueCd/m2 400 690 30 60 150 250 7 21
fL 117 201 9 17 44 73 2 6
ReDCd/m2 950 1350 60 120 400 650 65 110 400 800 30 60
fL 277 394 17 35 117 190 19 32 117 233 9 17
AMBeRCd/m2 850 1300 70 130 400 650 25 50 700 1400 50 100
fL 248 379 20 38 117 190 7 15 204 409 15 29
WHITeCd/m2 900 1300 45 90 300 600 10 30
fL 263 379 13 26 88 175 3 9
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 9
BIn this chapter, you will learn to create your part number to order your own push-button
select the body (base) 11
Customize the head (cap) Full display (monocase) 12Split display (bicase) 13
StEP 1
StEP 2
cuStoMiZationPRocEDuRE
Example: H Push button unsealed
H split display head
H Legend: top case:
FM2 (Futura Medium high 3.2/ lines 3/Character 4)
Bottom case: FM2 (Futura Medium high 3.2/ lines 3/Character 4)
H visual aspect: top case: sunlight readable
Bottom case: always visible white
H Color: top case: blue
Bottom case: amber
H Text: top case: Fault
Bottom case: oFF
218vL23 b yOO
Tsb / bwA FAULT*OFFTFM2 / bFM 2
{
StEP 1
StEP 1
StEP 2
RESult
StEP 2
8- vl 2 3-
1
1
1
2
3
4
1
2 3 4
Select the body (base)
Your reference will be composed as follow:
BE caREFul
Wording will consist of alphanumeric capital letters SPACES and DOTS will be counted as characters * = new case , = next line in the same case () = space
customize the head (cap) and write your text
Cap shell design
yoo
Head
- - - - -
Character and writing
Aspect Text
coDiFication PRocEDuRE
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators10
select the body
Customize the head split display (bicase)
Character and writing: Futura medium 3.2 mm
(T)op: (s)unlight readable/(b)lue(b)ottom: always visible (w)hite/(A)mber
note it on your order with your text Fault*oFF
your complete reference is FAulT
OFF
218vL23
b
TFM2 / bFM 2
Tsb / bwA
FAULT*OFF
Example:
BOT1
BOT2
split display (bicase) Bot1*Bot2
Full display (monocase) Mini, loaD, MastEr
MInIlOAD
MAsTeR
note your text in your order4
note your text in your order4
page 11
pages 12-13
Select the BoDY (BaSE)
our products exist in 3 different types of switch.
indicator
Illumination of message without switch action.
Momentary
Alternate snap action with 4 PDT (Pole Double Throw). The position changes when the cap is pressed. Then the switch state comes back to the original state when deactivated.
alternate
Momentary snap action with 4 PDT (Pole Double Throw). The momentary is retained in the latchdown position until it is pressed to return to the original state.
Body (base) Body (base)
Circuit diagrams Circuit diagrams
StEP 1
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 11
type of Body (BASe)
verSion terminAtionBody (BASe)
configurAtionfAmily led voltAge circuit diAgrAmS reference to note
indicatorunsealed
Indicator
Standard Body LED 28 VDC DIM / BrIGHT
108vL23
Sealed 408vL23
Momentaryunsealed
4 PDT218vL23
Sealed 518vL23
alternateunsealed
4 PDT318vL23
Sealed 618vL23
Select the type of switch needed and note your reference
you have selected the body (base). now customize the head: full display (monocase) page 12 or split display (bicase) page 13.
1
toP 1
reference
A
heigh (in mm)
numBer of lineS
numBer of chArActerS
per line mAximum
exAmple reference
Futura Medium
2.5 4L 6C TexT FM 1
3.2 3L 4C TexT FM 2
5.08 1L 3C TexT FM 3
Futura Medium
Condensed3.2 3L 7C text FMC 1
Number of characters per line can change according to the character chosen.
unlighted lighted colorS ref.
Sunl
ight
rea
dabl
e S(
1B
)
Black background and legend not visible
Colored and sunlight readable
lighted letters on black
backgound
Blue sb
GReen sG
ReD sR
TexTWHITe sw
AMBeR sA
colo
red
ba
ckgr
ound
c(2
B) Black background
and legend not visible
Black letters on lighted colored
background
TexT
ReD CR
AMBeR CA
alw
ays
visi
ble
whi
te n
(2g
2)
Black background and legend visible white
Colored and sunlight readable
lighted letters on black
backgound
Blue wb
GReen wG
TexT TexT
ReD wR
WHITe ww
AMBeR wA
coDiFication PRocEDuRE
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators12
Full DiSPlaY (MonocaSE)
Customize the hEaD (caP)
Select the cap shell design
Select the visual aspects of your head with a configuration and the colors
Select the character and the writing
StEP 2
13
note your text in your order4
2The character height is the distance from the top to the bottom of a capital letter. These typefaces are available in either or both upper and lower cases. The number of characters per line may be different according to the height.
TOPunlighted lighted colorS ref.
Sunl
ight
rea
dabl
e S(
1B
)
Black background and legend not visible
Colored and sunlight
readable lighted letters
on black backgound
BlueTsb
GReenTsG
ReDTsR
TexTWHITe
Tsw
AMBeRTsA
colo
red
ba
ckgr
ound
c(2
B)
Black background and legend not visible
Black letters on lighted colored
background
TexT
ReDTCR
AMBeRTCA
alw
ays
visi
ble
whi
te n
(2g
2)
Black background and legend visible white
Colored and sunlight
readable lighted letters
on black backgound
BlueTwb
GReenTwG
TexT TexT
ReDTwR
WHITeTww
AMBeRTwA
bOTTOMcolorS ref.
Bluebsb
GReenbsG
ReDbsR
WHITebsw
AMBeRbsA
ReDbCR
AMBeRbCA
Bluebwb
GReenbwG
ReDbwR
WHITebww
AMBeRbwA
toP
BottoM
1
2
reference
B
reference
heigh (in mm)
numBer of lineS
numBer of chArActerS
per line mAximum
exAmple TOP bOTTOM
Futura Medium
2.5 2L 6C TexT TFM 1 bFM 1
3.2 1L 4C TexT TFM 2 bFM 2
Futura Medium
Condensed3.2 1L 7C text TFMC 1 bFMC 1
Number of characters per line can change according to the character chosen.
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 13
SPlit DiSPlaY (BicaSE)
Customize the hEaD (caP)
Select the cap shell design
Select the visual aspects of your head with a configuration and the colors (top & bottom)
Select the character and the writing
you have completed your reference. Remember to note your text when you will order. Go to page 14 to browse the accessories.
StEP 2
13
note your text in your order4
2The character height is the distance from the top to the bottom of a capital letter. These typefaces are available in either or both upper and lower cases. The number of characters per line may be different according to the height.
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators14
cIn this chapter, you will be able to choose the accessories you need to install or protect the push-button
Add a connector and mounting sleeve 15Connector plugged to the mounting sleeve 15Connector fixed to the PWB 16
Add a flip guard 17
Add a spacer 18
Toolcase OUT242 18
Accessories are to be ordered separately. They have their own reference.
All dimensions are given in mm. 1 mm = 0.39 inch.
Memo
accESSoRiES
1st assembly combination. The connector is equiped with female sockets as described in standards (MIL-C-39029/57B/54).
3.1
Plug connEctoR reference
250sv01
You will need crimp socket contacts (not supplied): MIL-S-39029/57B/54
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 15
Add a connEctoR and Mounting SlEEvE
connector plugged to the mounting sleeve
FRont FacE REMovaBlE Mounting SlEEvE (not compatible with sealed version) reference
260sv01My1
mounting pAnel (metAl)
19,7
27,1
10,3
25
Ø3
20
R0,3
3.1
no FRont FacE REMovaBlE Mounting SlEEvE (compatible with sealed version) reference
vF1016
17,4
19,4
19,4
R0,8
19,4
19,4
20
R1
mounting pAnel (metAl)
light plAte (plAStic)
It requires access to the back of the mounting panel to replace a unit.
FRont FacE REMovaBlE Mounting SlEEvE (not compatible with sealed version) reference
270svO1My1
light plAte (plAStic)
27,1
20
21
21
R1
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators16
accESSoRiES
drilling A1 A2 A3 B1 B2 B3 c1 c2 c3 d1 d2 d3 4 5 6 7 8 9
PositionX 5.94 1.98 -1.98 5.94 1.98 -1.98 5.94 1.98 -1.98 5.94 1.98 -1.98 -6.4 -6.4 -6.4 -6.4 -6.4 -6.4
Y -5.94 -5.94 -5.94 -1.98 -1.98 -1.98 1.98 1.98 1.98 5.94 5.94 5.94 -6.4 -3.95 -1.5 1.5 3.95 6.4
280SV01AC
The PWB mounting allows to plug Zodiac Cockpit and Lighting Systems push-button switch into a PWB header that is soldered into the circuit board.
Pin connEctoR reference
28Osv01AC
TOP
2nd assembly combination
Add a connEctoR and Mounting SlEEvE connector fixed to
the Printed wiring Board (PwB)
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 17
3.2Add a FliP guaRD
702KU01 guard-sealed (opening angle 90°)
702KU01-50
632KU01 transparent unsealed flipguard (opening angle 180°)
632KU01-OAA
632KU01-OAJ
435KU02 unsealed flipguard (opening angle 180°)
435KU02AAy01
435KU02bby01
colorS reference
431KU02 unsealed flipguard (opening angle 180°)
431KU02AAy00
431KU02bby00
To prevent accidental actuation of the LED push-button switch, Zodiac Cockpit and Lighting Systems proposes to add a flip guard. The flipping part of this guard rotates from 0 to 180°. They remain closed until manually lighted. They return to closed position when released.
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators18
accESSoRiES
Add a SPacER3.3
The spacer is used to change the switch position in relation the front panel. The thickness of your overlay and where you want your switch to be in the actuated and unactuated position will affect your spacer height.
how can you choose your spacer ?vK
vK1050
different height Are AvAilABle reference
Spacer 2.6 mm vK1507
Spacer 2.4 mm vK1507A
Spacer 4.8 mm vK1507b
Spacer 2.9 mm vK1507C
Spacer 5.5 mm vK1050
• 260sv01My1 is not compatible wih spacers
• Spacers are not compatible with sealed version
TOOLCASE out2423.4
1
2 3
4 5
1 lED push-button extractor
2 screwdriver guide
3 head extractor
4 lamp body extractor
5 torque screwdriver
In this section are the instructions regarding installation of the LEd pushbutton into a control panel assembly.
D
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 19
inStallationPRocEDuRE
to assemble lED push-button, you require:
Mounting panel cutout
lED push-button laY out
lED push-button Pin out
H a lED push-buttonH a spacer (if used)H a mounting sleeve H a connector module
this procedure requires access to the back of the mounting panel.
SEvERal PREcautionS:
Don’t forget to disconnect all lighting and power of your panel before working on any switch.
Always have in mind that the flex circuit is mechanically attached from the cap shell to the body. So be very cautious in your actions.
To prevent the sealed push-button from being damaged, check that the cap shell is in the “non-compressed” position.
2. using the pushbutton extraction tool (ZEl out 74), pull the cap shell out from its body.
3. two mounting screw heads are now visible. with the torque screwdriver, rotate the two mounting cams.
1. install the mounting sleeve and spacer if used by screwing it on the mounting panel.
4. install the switch through panel cut off. Verify you put it in the correct position (the body is marked with the word “toP”).
information about replacement of your lED push-button:
H with mouting sleeve VF1016, you will need to have access to the back of the mounting panel.
H with mounting sleeves 260sV01My1 or 270sV01My1, you will be able to work through the front of the mounting panel. remove, the terminations will not be affected by any replacement.
inStallation PRocEDuRE
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators20
body (base)
head (cap)
INSTALLATION PRocEDuRE
Mounting panel cutout (metal)
Lighted panel clearance (plastic)
Connections
123
a B C D
5. From the front of the mounting panel, rotate locking screw to bring mounting cams to lock position with the torque screwdriver.
6. Put the cap back into position by pressing on it.
7. Connect it on the connector module. Push with precaution until the pins are seated in the connector module.
Your lED push-button switch is installed!
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 21
ZEl switch lED configuration:
Essential for mounting ✘ Optional
You can order the switch or accessories individually.
product reference config 1 config 2 config 3
Body (base) 1 Indicator, momentary, alternate standard body (base)
mounting Sleeve
2 No front removable vF1016
3Front removable
260sv01My1
4 270sv01My1
connector5 Plug in 250sv01A
6 PWB Termination 280sv01AC ✘
Spacer 7
Spacer 2.6 mm vK1507 ✘
Spacer 2.4 mm vK1507A ✘
Spacer 4.8 mm vK1507b ✘
Spacer 2.9 mm vK1507C ✘
Spacer 5.5 mm vK1050 ✘
Accessories 8
flip guard 180° 632KU01 ✘ ✘ ✘
flip guard 180° 431KU02 ✘ ✘ ✘
flip guard 180° 435KU02 ✘ ✘ ✘
guards sealed (90°) 702KU01-50 ✘ ✘ ✘
tools Tool case OUT242
config 1
(not compatible with sealed version)
1 Flip guard 2 Body3 lighted panel4 Mounting panel5 Mounting sleeve
260sV01My16 Connector 250sV01
1
2
3
45
6
config 2
(compatible with sealed version)
1
2
3
4
5
6
7
1 Flip guard2 Body3 lighted panel4 Mounting panel5 spacer6 Mounting sleeve VF10167 Connector 280sV01aC
config 3
(not compatible with sealed version)
2 1 Flip guard2 Body3 lighted panel4 Mounting panel5 Mounting sleeve
270sV01My16 Connector
280sV01aC
1
3
45
6
acceptance of order The customer's order and its acceptance by l'EQuIPE-MENT ET LA CONSTruCTION ELECTrIQuE (here in called Company), in the same way as the acceptance of all goods by the customer, until the customer's agreement to these Standard Terms and Conditions of sale. Company is only committed by the remittance of a firm offer, on its headed paper. It is not bound by the under-takings that may be entered into by its representatives or employees as long as it has not confirmed them. Offers will hold good only for the option period indicated on the quotations. This is three months, apart-from stipulations to the contrary. For all the supplies being the subject of an additional order or amendment prices and delivery times are quoted without taking the main order into account.
cancellation of order An order may not be either totally or partially cancelled without Company's prior agreement in writing. ln the event of an order in process of execution being cancelled, all the goods whose manufacture has commenced will be delivered and billed. Moreover, if Company has had to procure raw materials or special products in view of exe-cuting the aforesaid order, the cost of these procurements will be billed without deducting their possible reemploy-ment value.
Design studies and projects The studies and documents handed over by Company remain its sole property and should be returned on request. Company retains the patent rights of its projects which may not be communicated or executed without its permission in writing.
Delivery The delivery is considered to be made at Company's works or stores.The equipment travels at the consignee's risk, even if shipped "carriage paid" or "assembled on the spot"; these conditions being considered as a factor determining the price agreed to without any shift in responsibility. The risks relating to the products sold become the liability of the purchaser as soon as he is notified that the equip-ment is at his disposal or else, if in-factory acceptance has been scheduled, eight days after he has been informed that the equipment is ready.
Prices Company's quotations are established before VAT, ex-works. ln the event of variations of economic conditions, they can be readjusted where listed equipment is concer-ned, or revised whilst the order is in process for equip-ment supplied against estimates.
Delivery times The delivery times mentioned on Company's documents are provided as an indication. Company will do everything possible for them to be observed. Nevertheless the delays which may be observed may in no event involve Company's responsibility. No penalty for the late delivery may be applied without prior agreement in writing from Company. ln this case the total amount of the penalties may not exceed 10% of the price agreed. They will only be applied if there is a real and duly established prejudice. Company is automatically released from any commitment concer-ning delivery times and penalties, if the conditions have not been observed by the purchaser or if the informa-tion or documents to be supplied by the purchaser have
general terms of sales
SchEDulE
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators22
not arrived by the dates scheduled. Strikes or lock-outs, epidemics, wars, fires, floods, transport delays, legal changes of the working hours, toolings incidents, scrapping of important parts during manufacture, duly established by the customer or one of his mandated agents, or any other case of force majeure beyond the control of Company, can warrant an extension to the delivery time.
terms of payment Company's invoices are payable at its head office, 7 rue des Longs Quartiers - CS 50029 - 93108 Montreuil Cedex - France, in the following conditions: • by cheque, on removal of the goods, for a first transaction • by cheque or bank transfer, accepted and domiciled
draft, promissory note, letter of credit or bank transfer at 30 days starting from end of month of invoice date
Any additional or different terms shall not be binding upon Company unless specifically accepted in writing by an authorized representative of Company. Bills should be sent to us within 15 days after their issue. The fact of not paying an invoice on its due date makes the payment of all the other invoices due immediately.For any late payment on any one of the due dates, the sums due will bear interest at a rate of 3 times legal interest rate without any prior notice requi-red, and without prejudice to any other right which Company reserves for itself. This rate equals to European Central Bank (ECB) interest rate applied in its current refinancing operation, plus an increment of 10 percentage points.
transfer of ownership The transfer of ownership of the term sold takes place automatically on the day on which it is fully paid for.
warranty Company's warranty covers reconditioning free of charge, parts and labour, of all products returned carriage paid,
over a period of 12 months as from the date of delivery. It is applicable provided that products have been used complying with the indications or specifications given by Company and that no work has been done without Company's previous agreement. Company reserves the right to modify products in view of improving them in order to meet warranty requirements, purchasers undertaking not to claim any indemnification. For products returned to Company in view of inspection, calibration, repair and generally speaking all mainte-nance operations, Company's warranty is limited to three months, in the same conditions as above. No claim will be accepted if it has not reached the Company within a period of one month from receipt of the goods, which time is increased to three months in the case of a latent defect which could not be observed within one month.
Disputes Acceptance of an offer or sending of an order is equivalent to agreeing to the Standard Terms and Conditions of sale. The special conditions indicated on an order form only commit Company insofar as they are not contrary to or do not modify the terms specified in the above text. Any dispute concerning the interpretation or application of these terms will, failing an amicable agreement, be decided only by the Commercial Courts with jurisdiction over Company's domicile, whatever the place of delivery and the method of payment, even in the case of calling on the warranty or there being more than one defendant.
ZodiAc Aero electric (Zel) | lED Push-Button: MoMEntary & altErnatE switChEs anD inDiCators 23
ZoDiaC aErosPaCE From its very beginning, Zodiac Aerospace has played a leading role in the progress of activities as diverse as Aerosafety & Technology, Aircraft Systems, Cabin Interiors. Its worldwide reputation has been built on long-term commitment.
Focused on its historic core business of aerospace, Zodiac Aerospace is committed to ongoing implementation of the strategy that has proved so successful for over thirty years. Zodiac Aerospace holds world-leading positions in its niche markets, and offers a broad range of systems, equipment and services to all the world’s aircraft manufacturers and airlines.
recognized by the world’s leading aerospace companies, the skills of the Aircraft Systems segment cover both civil aviation and military applications.
Zodiac Aero Electric (ZEL) has a strong position in their three market segments: flight deck equipment and systems, external lighting systems and windshield wiper system. Zodiac Aero Electric (ZEL) designs, develops, produces and supports whole life cycle systems and equipment to commercial aircraft, regional aircraft, business jet and helicopter. The commitment for innovation combining exciting product development and efficient manufacturing is our core philosophy.
for All orderS email: [email protected] - Eu phone: +33 1 55 82 53 96 - uS phone: #425-897.4327
7 rue des Longs Quartiers - CS 50029 - 93108 Montreuil Cedex - France • Tel: +33 1 55 82 50 00 • Fax: +33 1 55 82 50 10 www.zodiacaerospace.com
Cré
dit
phot
o: Z
odia
c A
ero
Elec
tric
(ZE
L) -
201
4
ZODIAC AERO ELECTRIC (ZEL)AircrAft SyStemS