Powered by

POINT: 5M)MODULES CAN BE JOINED INTO LONGER STRINGS (MAXIMUM LENGHT OF LED SECTION WITH ONE POWER-SUPPLY

PROFESSIONAL PCB MOUNTING, ONLY BRAND-NAME LED DIODES (OSRAM, CITIZEN, CREE ETC.)PL LINE PRODUCT- PROFESSIONAL LINE, HIGHEST QUALITY, LUMINOSITY AND DURABILITY

Basic information

LED light bar OFBxx3014-14024LO - PRODUCT DATASHEET

5 cmCan be cut into section:

7.1 mmDistance between LED:

140 LED/mQty LED:

2620 - 2720 lm/mLuminocity:

20 W/mPower:

24 VVoltage:

MODULES CAN BE SPLIT INTO 5 CM SECTIONS (7LED)

CEILING, WALL, NICHE, SHELF, PASSAGEWAYS BACKLIGHTINGADVERTISING (SIGNBOARDS): SHOP, MUSEUM, TARDE FAIRS EXPOSITIONS ETC.KITCHEN WORKTOPS LIGHTING

UTILITY, DECORATIVE LIGHTING

Using

20 IPIP degree:

80 °CMaximum storage temperature:

-40 °CMinimum storage temperature:

40 °CMaximum Operating temperature:

-30 °CMinimum operating temperature:

80 Ra80 Ra80 RaColor rendering index (Ra):

120 °Beam angle:

3000 K4000 K5000 KColor temperature / Wavelenght scope :

3 mmHeight :

10 mmWidth:

0.83 A/mA/m:

0.14 WPower of single LED:

5 cmCan be cut into section:

7.1 mmDistance between LED:

140 LED/mQty LED:

2620 lm/m2720 lm/m2720 lm/mLuminocity:

20 W/mPower:

24 VVoltage:

Warm white WWNeutral white NWCool white WColor

Technical parameters

Connection diagram

1. Frosted cover 2. LED bar

3. Anodised profile4. Profile end cap

1. Transparent cover

2. LED bar 3. Profile end cap

4. Power supply wire 5. Power supplyconnectors 6. Anodised profile 7. Mounting bracket

Typical application

1. Frosted cover 2. LED bar

3. Built-up profile 4. Drywall (plaster- ,

furniture- board etc.)

-

3. POWER SUPPLY - LED OUTPUT

2. CONSTANT-VOLTAGE POWER SUPPLY

- GREEN-YELLOW WIRE - GROUND, PROTECTIVE EARTH

- BLUE WIRE - 0 NEUTRAL N

- BROWN WIRE - L LINE

1. POWER SUPPLY - INPUT 110/230 VAC (DEPENDING ON POWER SUPPLY AND ELECTRIC SUPPLY)

Installation

P24V = (5A + 5A + 3A) X 24V = 120W + 120W + 72W = 312W WHILE 24 V DC

P12V = (5A + 5A + 3A) X 12V = 60W + 60W + 36W = 156W WHILE 12 V DC

AND THIS GIVES US A POWER OF:

MAXIMUM CURRENT WHEN POWERING THREE STRIPS OF LED BAR 4,5,6 = 5A + 5A + 3A = 13A,

EXAMPLE FROM PICTURE ABOVE:

(PLEASE REMEMBER ABOUT PROPER WIRE GAUGE)AVERAGE ABOUT 3APATHS, - MAXIMUM CURRENT IS DEPENDENT ON DESIGN OF BAR AND THICKNESS OF BAR'S5 - ONE-SIDED POWER SUPPLY-

(PLEASE REMEMBER ABOUT PROPER WIRE GAUGE)AVERAGE ABOUT 5APATHS, - MAXIMUM CURRENT IS DEPENDENT ON DESIGN OF BAR AND THICKNESS OF BAR'S5 - MIDDLE-POINT POWER SUPPLY-

(PLEASE REMEMBER ABOUT PROPER WIRE GAUGE)AVERAGE ABOUT 5APATHS, - MAXIMUM CURRENT IS DEPENDENT ON DESIGN OF BAR AND THICKNESS OF BAR'S4 - TWO-SIDED POWER SUPPLY-

4, 5, 6. WAYS OF CONNECTING LED BARS TO POWER SUPPLY:

- BLACK WIRE - V- LED (MINUS)

- RED WIRE - V+ LED (PLUS)