Instruction Manual

LED High Bay Light

100W/120W/150W/200W

CompliantRoHS

Warranty

Troubleshooting?Problem Possible Cause Solutions

LEDs stop working

LEDs flash on and off

The power line is improperly connected.

The power plug is loose.

The LED driver malfunctions.

The LED chip is damaged.

The output of the driver is abnormal.

The LED chip breaks down.

Reconnect the power cable.

Firmly plug the power in.

Replace with new driver.

Replace with new LEDs.

Replace with new driver.

Replace with new LED chip.

5 years warranty for original purchaser of LED product that is identified on seller's invoice reflecting its original purchase (the "Product").

1. In order to make a warranty claim, you must notify seller in writing within sixty(60) days after your discovery of the defect, provide proof of purchase such as the invoice and comply with seller's other warranty requirements. Upon receiving that notice, to ascertain why fixtures stop working, evidences would be needed for seller's QC Team to analyze. Seller may require you to promptly return the Product to Seller when necessary, freight prepaid.

2. The determination of whether the Product is defective shall be made by Seller in its sole discretion with consideration given to the over all performance of the Product.

3. If seller determines the Product is defective, Seller will elect, in its sole discretion, repair the Product or replace the Product. Seller reserves the right to utilize new, reconditioned, refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part, as determined by Seller in its sole discretion, and warranted for the remainder of the original warranty period. However, cost of labor and equipment to remove the defective product and install a repaired or a replacement Product at the end-user facility are excluded. Supplier's aggregate liability with respect to a defective product shall in any event be limited to the money paid to buyer for that defective product.

The following circumstances will not be warranted:

1. Damage caused by force majeure such as war, riots, sabotage, cyclones, earthquakes, tidal waves, flooding, lighting strikes, explosions, fire, flood, etc.2. Damage caused by user's improper delivery, defects caused by wrong operation, wrong treatment and destruction of machinery.3. Dismantling or modification or improper maintenance or repairing of the products without the supplier's authorization. 4. Damage caused by buyer or installer using bad quality cable or other mismatching electronic parts.5. This warranty is invalid if the product is not used for the purpose for which is originally designed. Any disputes occurred shall be applied to the laws and regulations of P.R.C.

The seller has the sole right to interpret and amend the above articles.

1.

2.

4. 5.

Installation InstructionsWe appreciate your purchase!Please read the instruction manual before installation and keep it for future reference.

Reminder

Application

Warning

Technical Parameters

With unique high-purity die-cast aluminum heat sink, high-brightness SMD chip, high-effciency constant current and constant voltage power driver, the LED high bay is designed for factories, workshops, warehouses, highway�toll�stations,�gas�stations,�supermarkets,�exhibition�halls, stadiums and similar applications.

1. To avoid damage, falling, electric shock or fire, please do not modify the lamp or replace accessories without

confirming with the supplier first.

2. Please authorize only qualified personnel to install the lamp and ensure they follow the instructionmanual.

Any improper installation might cause falling, electric shock, fire, or other injury, damage or hazard.

3. Please disconnect power before installation or any maintenance of the lamp.

4. Please disconnect power if it begins to smoke or emit odors, since fire or electric shock may occur. Ask

qualified person to inspect and maintain the luminaire.

5. Please do not dismantle the lamp without the supplier’s authorization.

6. Please do not touch the power supply when the lamp is operating.

7. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire

shall be destroyed.

8. Terminal block not included. Instal lation may require advice from a qualified person.

9. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent

or a similar qualified person.

10. Only to be installed outside arms reach.

11. For use in environments where an accumulation of non-conductive dust on the luminaire may be expected.

12.Mounting heights of light s not higher than 30m.

Caution risk of electric shock

Physical Dimensions(Unit: mm)

Loop hanging installation

AC100-240V / AC100-277V

50 / 60Hz

6.4±0.3kg

494x383x186mm

7.2±0.3kg

100W 120W 150W 200W

0～+50℃

-40～+70℃

Product Specifications

Input Voltage

Power Frequency

Outlook Dimensions

Luminaire

Net Weight

Working Temperature

Storing Temperature

∅383

∅25

494

18

6

130

71

∅25

494

71

18

6

152∅30

494

71

20

5

192

∅383 ∅383

Normal: 100W

494x383x205mm

1. 2.

3.

AC(Input)

AC(Driver)

Dimmable(Driver)

Dimmable(MC031V)

12

3

L

N

L

N

DIM+

DIM-

DIM+(Black)

DIM-(Red)

N(Blue)

L in(Brown)

L out(Yellow)

L

N

brown

blue

yellow/green DIM- white

blue

blue

brown

black

white

green

DIM+

gray black

purple white

Waterproof Junction Box

AC(Input)

AC(Driver)

Dimmable(MC031V)

12

L

N

L

N

DIM+(Black)

DIM-(Red)

N(Blue)

L in(Brown)

L out(Yellow)

Waterproof Junction Box

123

123

12

DIMMABLE

NONDIMMABLE

12

6.4±0.3kg 7.2±0.3kg6.1±0.3kgNormal

High Efficacy

Normal: 120W/150WHigh Efficacy: 100W/120W/150W

Normal: 200WHigh Efficacy: 200W