Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23

Lecture 23:Multistage Amps-Cascades and

Cascodes

Prof. Niknejad

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Lecture Outline

Example 1: Cascodes Amp Design Example 2: Two Stage CS Amp

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

CG Cascade: DC Biasing

Two stages can have different supply currents

Extreme case:IBIAS2 = 0 A

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

CG Cascade: Sharing a Supply

First stage has no currentsupply of its own its outputresistance is modified

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

The Cascode Configuration

DC bias:

Two-port model: first stage has no current supply of its own

Common source / common gatecascade is one version of a cascode(all have shared supplies)

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Cascode Two-Port Model

CS1* CG2

Output resistance of first stage = 1,, * oCSdownCSoutrRR

Why is the cascode such an important configuration?

2 1 2|| (1 )out oc m o oR r g r r

1m mG g

inR

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Miller Capacitance of Input StageFind the Miller capacitance for Cgd1

Input resistance to common-gatesecond stage is low gain acrossCgd1 is small.

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Two-Port Model with Capacitors

Miller capacitance: 1)1(1 gdvCM CAC

gd

1

11 1

2 2

1( || ) 1gd

mvC m o

m m

gA g rg g

12M gdC C

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Generating Multiple DC Voltages

Stack-up diode-connected MOSFETs or BJTs and run a reference current through them pick off voltages from gates or bases as references

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Multistage Amplifier Design Examples

Start with basic two-stage transconductance amplifier:

Why do this combination?

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Current Supply Design

Output resistance goal requires large roc use cascode current source

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Totem Pole Voltage SupplyDC voltages must be set for the cascode current supply transistors M3 and M4, as well as the gate of M2.

Why include M2B?

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Complete Amplifier Schematic

Goals: gm1 = 1 mS, Rout =10 M

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Device Sizes

M1: select (W/L)1 = 200/2 to meet specified gm1 = 1 mS find VBIAS = 1.2 V

Cascode current supply devices: select VSG = 1.5 V(W/L)4= (W/L)4B= (W/L)3= (W/L)3B = 64/2M2: select (W/L)2 = 50/2 to meet specified Rout =10 M

find VGS2 = 1.4 VMatch M2 with diode-connected device M2B.

Assuming perfect matching and zero input voltage,what is VOUT?

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Output (Voltage) Swing

Maximum VOUT

Minimum VOUT

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Two-Port ModelFind output resistance Rout

n = (1/20) V-1, n = (1/50) V-1 at L = 2 m ron = (100 A / 20 V-1)-1 = 200 k, rop = 500 k

122333222 1||11|| omoSmoSmoocout rgrRgrRgrrR

SVVA

VVIg

TnGS

Dm 500

14.1)100(22

2

22

SVVA

VVIg

TpSG

Dm 400

15.1)100(2)(2

3

33

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Voltage Transfer CurveOpen-circuit voltage gain: Av = vout / vin = - gm1Rout

vOUT

vIN

3

4

1

2 1 0 3 4

2

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Two-Stage Amplifier Topology

Direct DC connection: use NMOS then PMOS

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Current Supply Design

Assume that the reference is a “sink” set by a resistor

Must mirror the reference current and generate a sink for iSUP 2

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Use Basic Current Supplies

Department of EECS University of California, Berkeley

EECS 105 Fall 2003, Lecture 23 Prof. A. Niknejad

Complete Amplifier Topology

What’s missing? The device dimensions and the biasvoltage and reference resistor